From: Kerstin Jonsson Date: Mon, 24 May 2010 19:13:15 +0000 (-0700) Subject: x86, apic: ack all pending irqs when crashed/on kexec X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8c3ba8d049247dc06b6dcee1711a11b26647aa44;p=openwrt%2Fstaging%2Fblogic.git x86, apic: ack all pending irqs when crashed/on kexec When the SMP kernel decides to crash_kexec() the local APICs may have pending interrupts in their vector tables. The setup routine for the local APIC has a deficient mechanism for clearing these interrupts, it only handles interrupts that has already been dispatched to the local core for servicing (the ISR register) safely, it doesn't consider lower prioritized queued interrupts stored in the IRR register. If you have more than one pending interrupt within the same 32 bit word in the LAPIC vector table registers you may find yourself entering the IO APIC setup with pending interrupts left in the LAPIC. This is a situation for wich the IO APIC setup is not prepared. Depending of what/which interrupt vector/vectors are stuck in the APIC tables your system may show various degrees of malfunctioning. That was the reason why the check_timer() failed in our system, the timer interrupts was blocked by pending interrupts from the old kernel when routed trough the IO APIC. Additional comment from Jiri Bohac: ============== If this should go into stable release, I'd add some kind of limit on the number of iterations, just to be safe from hard to debug lock-ups: +if (loops++ > MAX_LOOPS) { + printk("LAPIC pending clean-up") + break; +} while (queued); with MAX_LOOPS something like 1E9 this would leave plenty of time for the pending IRQs to be cleared and would and still cause at most a second of delay if the loop were to lock-up for whatever reason. [trenn@suse.de: V2: Use tsc if avail to bail out after 1 sec due to possible virtual apic_read calls which may take rather long (suggested by: Avi Kivity ) If no tsc is available bail out quickly after cpu_khz, if we broke out too early and still have irqs pending (which should never happen?) we still get a WARN_ON... V3: - Fixed indentation -> checkpatch clean - max_loops must be signed V4: - Fix typo, mixed up tsc and ntsc in first rdtscll() call V5: Adjust WARN_ON() condition to also catch error in cpu_has_tsc case] Cc: Cc: Yinghai Lu Cc: Kerstin Jonsson Cc: Avi Kivity Cc: Suresh Siddha Tested-by: Eric W. Biederman Signed-off-by: Thomas Renninger LKML-Reference: <201005241913.o4OJDGWM010865@imap1.linux-foundation.org> Signed-off-by: Andrew Morton Signed-off-by: H. Peter Anvin --- diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index e5a4a1e01618..c02cc692985c 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -51,6 +51,7 @@ #include #include #include +#include unsigned int num_processors; @@ -1151,8 +1152,13 @@ static void __cpuinit lapic_setup_esr(void) */ void __cpuinit setup_local_APIC(void) { - unsigned int value; - int i, j; + unsigned int value, queued; + int i, j, acked = 0; + unsigned long long tsc = 0, ntsc; + long long max_loops = cpu_khz; + + if (cpu_has_tsc) + rdtscll(tsc); if (disable_apic) { arch_disable_smp_support(); @@ -1204,13 +1210,32 @@ void __cpuinit setup_local_APIC(void) * the interrupt. Hence a vector might get locked. It was noticed * for timer irq (vector 0x31). Issue an extra EOI to clear ISR. */ - for (i = APIC_ISR_NR - 1; i >= 0; i--) { - value = apic_read(APIC_ISR + i*0x10); - for (j = 31; j >= 0; j--) { - if (value & (1<= 0; i--) + queued |= apic_read(APIC_IRR + i*0x10); + + for (i = APIC_ISR_NR - 1; i >= 0; i--) { + value = apic_read(APIC_ISR + i*0x10); + for (j = 31; j >= 0; j--) { + if (value & (1< 256) { + printk(KERN_ERR "LAPIC pending interrupts after %d EOI\n", + acked); + break; + } + if (cpu_has_tsc) { + rdtscll(ntsc); + max_loops = (cpu_khz << 10) - (ntsc - tsc); + } else + max_loops--; + } while (queued && max_loops > 0); + WARN_ON(max_loops <= 0); /* * Now that we are all set up, enable the APIC