From: John Crispin Date: Tue, 24 Nov 2015 18:29:26 +0000 (+0000) Subject: ralink: add support for netis WF-2881 X-Git-Tag: reboot~1437 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8c1f5141ceee722cdd282f909390b73455968cfd;p=openwrt%2Fopenwrt.git ralink: add support for netis WF-2881 netis WF-2881 is an MT7621AT based router with MT7602EN, MT7612EN. It has 128MB DDR3, 128MB SLC NAND FLASH, 5-port Gbps switch and 1x USB 3.0. The following patch adds support for this device. this device only works on top of UBI. Tested and working: * ethernet * both WiFi radios * USB 3.0 * buttons (reset button) * ethernet switch and USB diag LEDs * UART * GPIOs * sysupgrade Tested and not working * failsafe Signed-off-by: YounJae Rho SVN-Revision: 47619 --- diff --git a/target/linux/ramips/Makefile b/target/linux/ramips/Makefile index eafd2742e6..a92b287fcf 100644 --- a/target/linux/ramips/Makefile +++ b/target/linux/ramips/Makefile @@ -10,7 +10,7 @@ ARCH:=mipsel BOARD:=ramips BOARDNAME:=Ralink RT288x/RT3xxx SUBTARGETS:=rt305x mt7620 mt7621 mt7628 mt7688 rt3883 rt288x -FEATURES:=squashfs gpio +FEATURES:=squashfs gpio ubifs MAINTAINER:=John Crispin KERNEL_PATCHVER:=3.18 diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 1c18ded505..a4658a01b1 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -44,7 +44,8 @@ air3gii) all0239-3g|\ hw550-3g|\ mofi3500-3gn|\ -sap-g3200u3) +sap-g3200u3|\ +wf-2881) set_usb_led "$board:green:usb" ;; all0256n) diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 22809d1720..7e5122986c 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -78,6 +78,7 @@ ramips_setup_interfaces() oy-0001|\ pbr-m1|\ sap-g3200u3|\ + wf-2881|\ whr-300hp2|\ whr-600d|\ wsr-1166|\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 3013d245d6..ff5fbf2696 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -155,6 +155,7 @@ get_status_led() { tew-692gr|\ ur-326n4g|\ ur-336un|\ + wf-2881|\ wr512-3gn) status_led="$board:green:wps" ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index d6fdeb9891..92e13c034f 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -376,6 +376,9 @@ ramips_board_detect() { *"WCR-150GN") name="wcr-150gn" ;; + *"WF-2881") + name="wf-2881" + ;; *"WHR-1166D") name="whr-1166d" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 0b9dd43791..073593ad38 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -108,6 +108,7 @@ platform_check_image() { w150m|\ w306r-v20|\ w502u|\ + wf-2881|\ whr-1166d|\ whr-300hp2|\ whr-600d|\ diff --git a/target/linux/ramips/dts/WF-2881.dts b/target/linux/ramips/dts/WF-2881.dts new file mode 100644 index 0000000000..7228dc527f --- /dev/null +++ b/target/linux/ramips/dts/WF-2881.dts @@ -0,0 +1,133 @@ +/dts-v1/; + +/include/ "mt7621.dtsi" + +/ { + compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc"; + model = "NETIS WF-2881"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + palmbus@1E000000 { + spi@b00 { + status="disabled"; + }; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + nand@1e003000 { + compatible = "mtk,mt7621-nand"; + bank-width = <2>; + reg = <0x1e003000 0x800 + 0x1e003800 0x800>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x1000>; + read-only; + }; + + partition@80000 { + label = "config"; + reg = <0x80000 0x80000>; + read-only; + }; + + factory: partition@100000 { + label = "factory"; + reg = <0x100000 0x40000>; + read-only; + }; + + firmware { + label = "firmware"; + reg = <0x140000 0x6EC0000>; + }; + + partition@140000 { + label = "kernel"; + reg = <0x140000 0x200000>; + }; + + partition@340000 { + label = "ubi"; + reg = <0x340000 0x6CC0000>; + }; + }; + + pcie@1e140000 { + status = "okay"; + + pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + mediatek,2ghz = <0>; + }; + }; + + pcie1 { + mt76@1,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x0000>; + mediatek,5ghz = <0>; + }; + }; + }; + + ethernet@1e100000 { + mtd-mac-address = <&factory 0xe006>; + }; + + gpio-leds { + compatible = "gpio-leds"; + + usb { + label = "wf-2881:green:usb"; + gpios = <&gpio0 6 1>; + }; + + wps { + label = "wf-2881:green:wps"; + gpios = <&gpio0 0 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 12 1>; + linux,code = <0x198>; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "uart3", "jtag"; + ralink,function = "gpio"; + }; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 5a2b98cac6..9521f2cfd0 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -954,7 +954,7 @@ endif # ifeq ($(SUBTARGET),mt7621) - TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 zbt-wg2626 + TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 zbt-wg2626 wf-2881 endif define Device/mt7621 @@ -1009,6 +1009,15 @@ define Device/zbt-wg2626 IMAGE_SIZE := $(ralink_default_fw_size_16M) endef +define Device/wf-2881 + DTS := WF-2881 + BLOCKSIZE := 128KiB + PAGESIZE := 2048 + KERNEL_SIZE := 2097152 + FILESYSTEMS := squashfs + IMAGE/sysupgrade.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size $$$$(IMAGE_SIZE) +endef + # # MT7628 Profiles # diff --git a/target/linux/ramips/mt7621/config-3.18 b/target/linux/ramips/mt7621/config-3.18 index fb05d1e645..13ff9f8467 100644 --- a/target/linux/ramips/mt7621/config-3.18 +++ b/target/linux/ramips/mt7621/config-3.18 @@ -36,6 +36,11 @@ CONFIG_CPU_RMAP=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_CPU_SUPPORTS_MSA=y +CONFIG_CRC16=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CSRC_R4K=y CONFIG_DEBUG_PINCTRL=y CONFIG_DMA_NONCOHERENT=y @@ -102,6 +107,8 @@ CONFIG_IRQ_FORCED_THREADING=y CONFIG_IRQ_GIC=y CONFIG_IRQ_WORK=y CONFIG_LIBFDT=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y CONFIG_MDIO_BOARDINFO=y CONFIG_MIPS=y CONFIG_MIPS_CM=y @@ -117,18 +124,26 @@ CONFIG_MIPS_MT_FPAFF=y CONFIG_MIPS_MT_SMP=y CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y # CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_MTK_MTD_NAND is not set CONFIG_MODULES_USE_ELF_REL=y CONFIG_MT7621_WDT=y # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_SPLIT_FIRMWARE=y CONFIG_MTD_SPLIT_SEAMA_FW=y CONFIG_MTD_SPLIT_TRX_FW=y CONFIG_MTD_SPLIT_UIMAGE_FW=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTK_MTD_NAND=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NET_FLOW_LIMIT=y CONFIG_NET_RALINK=y @@ -209,9 +224,16 @@ CONFIG_SYS_SUPPORTS_SCHED_SMT=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_TICK_CPU_ACCOUNTING=y CONFIG_TREE_RCU=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +# CONFIG_UBIFS_FS_XZ is not set +CONFIG_UBIFS_FS_ZLIB=y CONFIG_USB_SUPPORT=y CONFIG_USE_OF=y CONFIG_WATCHDOG_CORE=y CONFIG_WEAK_ORDERING=y CONFIG_XPS=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ramips/mt7621/profiles/netis.mk b/target/linux/ramips/mt7621/profiles/netis.mk new file mode 100644 index 0000000000..39b524f534 --- /dev/null +++ b/target/linux/ramips/mt7621/profiles/netis.mk @@ -0,0 +1,23 @@ +# +# Copyright (C) 2015 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/WF-2881 + NAME:=NETIS WF-2881 + PACKAGES:=\ + kmod-usb-core kmod-usb3 kmod-usb-hid \ + kmod-ledtrig-usbdev +endef + +define Profile/WF-2881/Description + Package set compatible with the NETIS WF-2881 board. +endef + +#-m -e -c +WF-2881_UBIFS_OPTS:="-m 2048 -e 129024 -c 1024" +WF-2881_UBI_OPTS:="-m 2048 -p 128KiB -s 512" + +$(eval $(call Profile,WF-2881))