From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Date: Mon, 12 Jan 2015 12:07:27 +0000 (+0200)
Subject: ath10k: add support to send addba request
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8bf8f190febcd2b4544d5fa13ed0809e2e92f53b;p=openwrt%2Fstaging%2Fblogic.git

ath10k: add support to send addba request

This per-station debugfs entry helps to send addba request in manual
mode. Need to pass two configuration parameters (tid, buffer size)
as input.

To send addba,

echo 1 32 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
	   stations/XX:XX:XX:XX:XX:XX/addba

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---

diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index 5df967387532..23d81a244201 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -80,9 +80,61 @@ static const struct file_operations fops_aggr_mode = {
 	.llseek = default_llseek,
 };
 
+static ssize_t ath10k_dbg_sta_write_addba(struct file *file,
+					  const char __user *user_buf,
+					  size_t count, loff_t *ppos)
+{
+	struct ieee80211_sta *sta = file->private_data;
+	struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+	struct ath10k *ar = arsta->arvif->ar;
+	u32 tid, buf_size;
+	int ret;
+	char buf[64];
+
+	simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count);
+
+	/* make sure that buf is null terminated */
+	buf[sizeof(buf) - 1] = '\0';
+
+	ret = sscanf(buf, "%u %u", &tid, &buf_size);
+	if (ret != 2)
+		return -EINVAL;
+
+	/* Valid TID values are 0 through 15 */
+	if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2)
+		return -EINVAL;
+
+	mutex_lock(&ar->conf_mutex);
+	if ((ar->state != ATH10K_STATE_ON) ||
+	    (arsta->aggr_mode != ATH10K_DBG_AGGR_MODE_MANUAL)) {
+		ret = count;
+		goto out;
+	}
+
+	ret = ath10k_wmi_addba_send(ar, arsta->arvif->vdev_id, sta->addr,
+				    tid, buf_size);
+	if (ret) {
+		ath10k_warn(ar, "failed to send addba request: vdev_id %u peer %pM tid %u buf_size %u\n",
+			    arsta->arvif->vdev_id, sta->addr, tid, buf_size);
+	}
+
+	ret = count;
+out:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static const struct file_operations fops_addba = {
+	.write = ath10k_dbg_sta_write_addba,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
 void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			    struct ieee80211_sta *sta, struct dentry *dir)
 {
 	debugfs_create_file("aggr_mode", S_IRUGO | S_IWUSR, dir, sta,
 			    &fops_aggr_mode);
+	debugfs_create_file("addba", S_IWUSR, dir, sta, &fops_addba);
 }