From: Paul Wassi Date: Sun, 30 Dec 2018 20:37:50 +0000 (+0100) Subject: ath79: fix boardname of GL.iNet GL-AR150 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8ba76d6e744f2f2fb5afb9fd8ac2b828d7c8387c;p=openwrt%2Fstaging%2Fwigyori.git ath79: fix boardname of GL.iNet GL-AR150 This device is called GL-AR150, therefore rename the board to 'gl-ar150' Signed-off-by: Paul Wassi --- diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 83bede0961..906ccd753f 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -89,8 +89,8 @@ ath79_setup_interfaces() etactica,eg200) ucidef_set_interface_lan "eth0" "dhcp" ;; - glinet,ar150|\ glinet,ar300m|\ + glinet,gl-ar150|\ glinet,gl-x750) ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; diff --git a/target/linux/ath79/dts/ar9330_glinet_ar150.dts b/target/linux/ath79/dts/ar9330_glinet_ar150.dts deleted file mode 100644 index fbc3acdd1b..0000000000 --- a/target/linux/ath79/dts/ar9330_glinet_ar150.dts +++ /dev/null @@ -1,145 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include -#include - -#include "ar9330.dtsi" - -/ { - model = "GL.iNet GL-AR150"; - compatible = "glinet,ar150", "qca,ar9330"; - - aliases { - serial0 = &uart; - led-boot = &wlan; - led-failsafe = &wlan; - led-upgrade = &wlan; - }; - - leds { - compatible = "gpio-leds"; - - wlan: wlan { - label = "gl-ar150:orange:wlan"; - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - lan { - label = "gl-ar150:green:lan"; - gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; - }; - - wan { - label = "gl-ar150:green:wan"; - gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - manual { - label = "manual"; - linux,code = ; - gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; - }; - - auto { - label = "auto"; - linux,code = ; - gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; - }; - - reset { - label = "reset"; - linux,code = ; - gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&uart { - status = "okay"; -}; - -&gpio { - status = "okay"; -}; - -&usb { - dr_mode = "host"; - status = "okay"; -}; - -&usb_phy { - status = "okay"; - gpios = <&gpio 6 GPIO_ACTIVE_HIGH>; -}; - -&spi { - num-chipselects = <1>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <104000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@1 { - label = "u-boot-env"; - reg = <0x040000 0x010000>; - }; - - partition@2 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x050000 0xfa0000>; - }; - - art: partition@3 { - label = "ART"; - reg = <0xff0000 0x010000>; - read-only; - }; - }; - }; -}; - -ð0 { - status = "okay"; - - mtd-mac-address = <&art 0x0>; -}; - -ð1 { - status = "okay"; - - mtd-mac-address = <&art 0x0>; - - gmac-config { - device = <&gmac>; - - switch-phy-addr-swap = <0>; - switch-phy-swap = <0>; - }; -}; - -&wmac { - status = "okay"; - mtd-cal-data = <&art 0x1000>; - mtd-mac-address = <&art 0x0>; -}; diff --git a/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts b/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts new file mode 100644 index 0000000000..53df36760f --- /dev/null +++ b/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "ar9330.dtsi" + +/ { + model = "GL.iNet GL-AR150"; + compatible = "glinet,gl-ar150", "qca,ar9330"; + + aliases { + serial0 = &uart; + led-boot = &wlan; + led-failsafe = &wlan; + led-upgrade = &wlan; + }; + + leds { + compatible = "gpio-leds"; + + wlan: wlan { + label = "gl-ar150:orange:wlan"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + + lan { + label = "gl-ar150:green:lan"; + gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + }; + + wan { + label = "gl-ar150:green:wan"; + gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + manual { + label = "manual"; + linux,code = ; + gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; + }; + + auto { + label = "auto"; + linux,code = ; + gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + }; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; + +&usb { + dr_mode = "host"; + status = "okay"; +}; + +&usb_phy { + status = "okay"; + gpios = <&gpio 6 GPIO_ACTIVE_HIGH>; +}; + +&spi { + num-chipselects = <1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <104000000>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@1 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + }; + + partition@2 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x050000 0xfa0000>; + }; + + art: partition@3 { + label = "ART"; + reg = <0xff0000 0x010000>; + read-only; + }; + }; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&art 0x0>; +}; + +ð1 { + status = "okay"; + + mtd-mac-address = <&art 0x0>; + + gmac-config { + device = <&gmac>; + + switch-phy-addr-swap = <0>; + switch-phy-swap = <0>; + }; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&art 0x0>; +}; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 31c62f659d..600ab43e7f 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -259,14 +259,14 @@ define Device/etactica_eg200 endef TARGET_DEVICES += etactica_eg200 -define Device/glinet_ar150 +define Device/glinet_gl-ar150 ATH_SOC := ar9330 DEVICE_TITLE := GL.iNet GL-AR150 DEVICE_PACKAGES := kmod-usb-chipidea2 IMAGE_SIZE := 16000k SUPPORTED_DEVICES += gl-ar150 endef -TARGET_DEVICES += glinet_ar150 +TARGET_DEVICES += glinet_gl-ar150 define Device/glinet_ar300m-nor ATH_SOC := qca9531