From: Álvaro Fernández Rojas Date: Wed, 8 Mar 2017 08:46:30 +0000 (+0100) Subject: brcm2708: update linux 4.4 patches to latest version X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8b52a8906bf376610e5a8d051ead1d50610e6da1;p=openwrt%2Fstaging%2Frmilecki.git brcm2708: update linux 4.4 patches to latest version As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.4.y - led1 can't be controlled on rpi-3 for linux 4.4, remove it. - Fix modules.mk typos. Signed-off-by: Álvaro Fernández Rojas --- diff --git a/target/linux/brcm2708/base-files/etc/diag.sh b/target/linux/brcm2708/base-files/etc/diag.sh index 2a866e4339b..ecc6242d732 100644 --- a/target/linux/brcm2708/base-files/etc/diag.sh +++ b/target/linux/brcm2708/base-files/etc/diag.sh @@ -12,8 +12,7 @@ set_state() { status_led="led0" ;; rpi-b-plus |\ - rpi-2-b |\ - rpi-3-b) + rpi-2-b) status_led="led1" ;; esac diff --git a/target/linux/brcm2708/modules.mk b/target/linux/brcm2708/modules.mk index e2b3fdb59e8..f1c4ab1e2c8 100644 --- a/target/linux/brcm2708/modules.mk +++ b/target/linux/brcm2708/modules.mk @@ -1,5 +1,6 @@ # # Copyright (C) 2012-2016 OpenWrt.org +# Copyright (C) 2017 LEDE project # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. @@ -126,8 +127,8 @@ define KernelPackage/sound-soc-digidac1-soundcard $(LINUX_DIR)/sound/soc/codecs/snd-soc-wm8741.ko \ $(LINUX_DIR)/sound/soc/codecs/snd-soc-wm8804.ko \ $(LINUX_DIR)/sound/soc/codecs/snd-soc-wm8804-i2c.ko - AUTOLOAD:=$(call AutoLoad,68,snd-soc-snd-soc-wm8741 \ - snd-soc-snd-soc-wm8804 snd-soc-snd-soc-wm8804-i2c \ + AUTOLOAD:=$(call AutoLoad,68,snd-soc-wm8741 \ + snd-soc-wm8804 snd-soc-wm8804-i2c \ snd-soc-digidac1-soundcard) DEPENDS:= \ kmod-sound-soc-bcm2835-i2s \ @@ -149,7 +150,7 @@ define KernelPackage/sound-soc-dionaudio-loco FILES:= \ $(LINUX_DIR)/sound/soc/bcm/snd-soc-dionaudio-loco.ko \ $(LINUX_DIR)/sound/soc/codecs/snd-soc-pcm5102a.ko - AUTOLOAD:=$(call AutoLoad,68,snd-soc-snd-soc-pcm5102a \ + AUTOLOAD:=$(call AutoLoad,68,snd-soc-pcm5102a \ snd-soc-dionaudio-loco) DEPENDS:= \ kmod-sound-soc-bcm2835-i2s diff --git a/target/linux/brcm2708/patches-4.4/0551-ARM-dts-Restore-dtbs_install-functionality.patch b/target/linux/brcm2708/patches-4.4/0551-ARM-dts-Restore-dtbs_install-functionality.patch deleted file mode 100644 index 5224e261234..00000000000 --- a/target/linux/brcm2708/patches-4.4/0551-ARM-dts-Restore-dtbs_install-functionality.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 49b92b33aa6681e75f579b7369f34a53e9376e6c Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Sat, 26 Nov 2016 14:01:52 +0000 -Subject: [PATCH] ARM: dts: Restore dtbs_install functionality - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/Makefile | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -806,10 +806,11 @@ dtstree := $(srctree)/$(src) - dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) - - always := $(dtb-y) --subdir-y := $(dts-dirs) overlays -+subdir-y := overlays - clean-files := *.dtb - - # Enable fixups to support overlays on BCM2708 platforms - ifeq ($(RPI_DT_OVERLAYS),y) - DTC_FLAGS ?= -@ -H epapr -+ dts-dirs += overlays - endif diff --git a/target/linux/brcm2708/patches-4.4/0551-kbuild-add-fno-PIE.patch b/target/linux/brcm2708/patches-4.4/0551-kbuild-add-fno-PIE.patch new file mode 100644 index 00000000000..0d2c1a5744f --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0551-kbuild-add-fno-PIE.patch @@ -0,0 +1,45 @@ +From d7c87b54cdabe76c12f2bb527f2a6b02b6255a0f Mon Sep 17 00:00:00 2001 +From: Sebastian Andrzej Siewior +Date: Fri, 4 Nov 2016 19:39:38 +0100 +Subject: [PATCH] kbuild: add -fno-PIE +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +commit 8ae94224c9d72fc4d9aaac93b2d7833cf46d7141 upstream. + +Debian started to build the gcc with -fPIE by default so the kernel +build ends before it starts properly with: +|kernel/bounds.c:1:0: error: code model kernel does not support PIC mode + +Also add to KBUILD_AFLAGS due to: + +|gcc -Wp,-MD,arch/x86/entry/vdso/vdso32/.note.o.d … -mfentry -DCC_USING_FENTRY … vdso/vdso32/note.S +|arch/x86/entry/vdso/vdso32/note.S:1:0: sorry, unimplemented: -mfentry isn’t supported for 32-bit in combination with -fpic + +Tagging it stable so it is possible to compile recent stable kernels as +well. + +Signed-off-by: Sebastian Andrzej Siewior +Signed-off-by: Michal Marek +Signed-off-by: Greg Kroah-Hartman +--- + Makefile | 2 ++ + 1 file changed, 2 insertions(+) + +diff --git a/Makefile b/Makefile +index 1099371..c17219e 100644 +--- a/Makefile ++++ b/Makefile +@@ -619,6 +619,8 @@ include arch/$(SRCARCH)/Makefile + KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,) + KBUILD_CFLAGS += $(call cc-disable-warning,maybe-uninitialized,) + KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,) ++KBUILD_CFLAGS += $(call cc-option,-fno-PIE) ++KBUILD_AFLAGS += $(call cc-option,-fno-PIE) + + ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE + KBUILD_CFLAGS += -Os +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0552-BCM270X_DT-Update-UART0-clock-frequency.patch b/target/linux/brcm2708/patches-4.4/0552-BCM270X_DT-Update-UART0-clock-frequency.patch deleted file mode 100644 index 2fc63967917..00000000000 --- a/target/linux/brcm2708/patches-4.4/0552-BCM270X_DT-Update-UART0-clock-frequency.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 1efce478669516e7a0fad7fa9943c889fcc21d2e Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Sun, 27 Nov 2016 21:45:55 +0000 -Subject: [PATCH] BCM270X_DT: Update UART0 clock-frequency - -The Raspberry Pi firmware now sets the UART0 clock frequency to -48MHz (was 3MHz), to allow for baudrates up to 3MHz. This value -is overwritten by the firmware, but alternative loaders such -as U-Boot ignore the firmware-provided DTB. And besides, the -default ought to be correct. - -See: https://github.com/raspberrypi/linux/issues/1732 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm2708_common.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/bcm2708_common.dtsi -+++ b/arch/arm/boot/dts/bcm2708_common.dtsi -@@ -456,7 +456,7 @@ - reg = <2>; - #clock-cells = <0>; - clock-output-names = "uart0_pclk"; -- clock-frequency = <3000000>; -+ clock-frequency = <48000000>; - }; - - clk_apb_p: clock@3 { diff --git a/target/linux/brcm2708/patches-4.4/0552-kbuild-Steal-gcc-s-pie-from-the-very-beginning.patch b/target/linux/brcm2708/patches-4.4/0552-kbuild-Steal-gcc-s-pie-from-the-very-beginning.patch new file mode 100644 index 00000000000..2361c75e690 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0552-kbuild-Steal-gcc-s-pie-from-the-very-beginning.patch @@ -0,0 +1,54 @@ +From e1c194ad704d298d6914e5b1efc4afee41a18a4c Mon Sep 17 00:00:00 2001 +From: Borislav Petkov +Date: Mon, 14 Nov 2016 19:41:31 +0100 +Subject: [PATCH] kbuild: Steal gcc's pie from the very beginning + +commit c6a385539175ebc603da53aafb7753d39089f32e upstream. + +So Sebastian turned off the PIE for kernel builds but that was too late +- Kbuild.include already uses KBUILD_CFLAGS and trying to disable gcc +options with, say cc-disable-warning, fails: + + gcc -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs + ... + -Wno-sign-compare -fno-asynchronous-unwind-tables -Wframe-address -c -x c /dev/null -o .31392.tmp + /dev/null:1:0: error: code model kernel does not support PIC mode + +because that returns an error and we can't disable the warning. For +example in this case: + +KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,) + +which leads to gcc issuing all those warnings again. + +So let's turn off PIE/PIC at the earliest possible moment, when we +declare KBUILD_CFLAGS so that cc-disable-warning picks it up too. + +Also, we need the $(call cc-option ...) because -fno-PIE is supported +since gcc v3.4 and our lowest supported gcc version is 3.2 right now. + +Signed-off-by: Borislav Petkov +Cc: Ben Hutchings +Cc: Sebastian Andrzej Siewior +Signed-off-by: Michal Marek +Signed-off-by: Greg Kroah-Hartman +--- + Makefile | 2 -- + 1 file changed, 2 deletions(-) + +diff --git a/Makefile b/Makefile +index c17219e..1099371 100644 +--- a/Makefile ++++ b/Makefile +@@ -619,8 +619,6 @@ include arch/$(SRCARCH)/Makefile + KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,) + KBUILD_CFLAGS += $(call cc-disable-warning,maybe-uninitialized,) + KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,) +-KBUILD_CFLAGS += $(call cc-option,-fno-PIE) +-KBUILD_AFLAGS += $(call cc-option,-fno-PIE) + + ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE + KBUILD_CFLAGS += -Os +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0553-ARM-dts-Restore-dtbs_install-functionality.patch b/target/linux/brcm2708/patches-4.4/0553-ARM-dts-Restore-dtbs_install-functionality.patch new file mode 100644 index 00000000000..2fe4b16d6df --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0553-ARM-dts-Restore-dtbs_install-functionality.patch @@ -0,0 +1,30 @@ +From 192835cf562bf63050f3f4b3dab768f3481eb93d Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Sat, 26 Nov 2016 14:01:52 +0000 +Subject: [PATCH] ARM: dts: Restore dtbs_install functionality + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/Makefile | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index cbfc8ba..14a491c 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -806,10 +806,11 @@ dtstree := $(srctree)/$(src) + dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) + + always := $(dtb-y) +-subdir-y := $(dts-dirs) overlays ++subdir-y := overlays + clean-files := *.dtb + + # Enable fixups to support overlays on BCM2708 platforms + ifeq ($(RPI_DT_OVERLAYS),y) + DTC_FLAGS ?= -@ -H epapr ++ dts-dirs += overlays + endif +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0553-BCM2835-v4l2-Fix-a-conformance-test-failure.patch b/target/linux/brcm2708/patches-4.4/0553-BCM2835-v4l2-Fix-a-conformance-test-failure.patch deleted file mode 100644 index 2ed182a4706..00000000000 --- a/target/linux/brcm2708/patches-4.4/0553-BCM2835-v4l2-Fix-a-conformance-test-failure.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 05b2785cb7e1f40900dad84579c6f7fd4ad8aeda Mon Sep 17 00:00:00 2001 -From: Dave Stevenson <6by9@users.noreply.github.com> -Date: Wed, 30 Nov 2016 20:17:14 +0000 -Subject: [PATCH] BCM2835-v4l2: Fix a conformance test failure - -Format ioctls: - test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK - warn: v4l2-test-formats.cpp(1195): S_PARM is supported but - doesn't report V4L2_CAP_TIMEPERFRAME. - fail: v4l2-test-formats.cpp(1118): node->has_frmintervals - && !cap->capability ---- - drivers/media/platform/bcm2835/bcm2835-camera.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/media/platform/bcm2835/bcm2835-camera.c -+++ b/drivers/media/platform/bcm2835/bcm2835-camera.c -@@ -1397,6 +1397,7 @@ static int vidioc_s_parm(struct file *fi - dev->capture.timeperframe = tpf; - parm->parm.capture.timeperframe = tpf; - parm->parm.capture.readbuffers = 1; -+ parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME; - - fps_param.num = 0; /* Select variable fps, and then use - * FPS_RANGE to select the actual limits. diff --git a/target/linux/brcm2708/patches-4.4/0554-BCM270X_DT-Update-UART0-clock-frequency.patch b/target/linux/brcm2708/patches-4.4/0554-BCM270X_DT-Update-UART0-clock-frequency.patch new file mode 100644 index 00000000000..3d3f9111a88 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0554-BCM270X_DT-Update-UART0-clock-frequency.patch @@ -0,0 +1,34 @@ +From 70af0eca2c4a2a80a8edd6ce4c4c7a9eac038893 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Sun, 27 Nov 2016 21:45:55 +0000 +Subject: [PATCH] BCM270X_DT: Update UART0 clock-frequency + +The Raspberry Pi firmware now sets the UART0 clock frequency to +48MHz (was 3MHz), to allow for baudrates up to 3MHz. This value +is overwritten by the firmware, but alternative loaders such +as U-Boot ignore the firmware-provided DTB. And besides, the +default ought to be correct. + +See: https://github.com/raspberrypi/linux/issues/1732 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2708_common.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/arch/arm/boot/dts/bcm2708_common.dtsi b/arch/arm/boot/dts/bcm2708_common.dtsi +index c449493..a9fd97e 100644 +--- a/arch/arm/boot/dts/bcm2708_common.dtsi ++++ b/arch/arm/boot/dts/bcm2708_common.dtsi +@@ -456,7 +456,7 @@ + reg = <2>; + #clock-cells = <0>; + clock-output-names = "uart0_pclk"; +- clock-frequency = <3000000>; ++ clock-frequency = <48000000>; + }; + + clk_apb_p: clock@3 { +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0555-BCM2835-v4l2-Fix-a-conformance-test-failure.patch b/target/linux/brcm2708/patches-4.4/0555-BCM2835-v4l2-Fix-a-conformance-test-failure.patch new file mode 100644 index 00000000000..68dca0c3741 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0555-BCM2835-v4l2-Fix-a-conformance-test-failure.patch @@ -0,0 +1,30 @@ +From e94e99c9650e48f0de0399cf04ec3ae597f05ed2 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson <6by9@users.noreply.github.com> +Date: Wed, 30 Nov 2016 20:17:14 +0000 +Subject: [PATCH] BCM2835-v4l2: Fix a conformance test failure + +Format ioctls: + test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK + warn: v4l2-test-formats.cpp(1195): S_PARM is supported but + doesn't report V4L2_CAP_TIMEPERFRAME. + fail: v4l2-test-formats.cpp(1118): node->has_frmintervals + && !cap->capability +--- + drivers/media/platform/bcm2835/bcm2835-camera.c | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/drivers/media/platform/bcm2835/bcm2835-camera.c b/drivers/media/platform/bcm2835/bcm2835-camera.c +index a2cfff9..23ba458 100644 +--- a/drivers/media/platform/bcm2835/bcm2835-camera.c ++++ b/drivers/media/platform/bcm2835/bcm2835-camera.c +@@ -1397,6 +1397,7 @@ static int vidioc_s_parm(struct file *file, void *priv, + dev->capture.timeperframe = tpf; + parm->parm.capture.timeperframe = tpf; + parm->parm.capture.readbuffers = 1; ++ parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME; + + fps_param.num = 0; /* Select variable fps, and then use + * FPS_RANGE to select the actual limits. +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0556-BCM270X_DT-Add-overlay-for-enc28j60-on-SPI2.patch b/target/linux/brcm2708/patches-4.4/0556-BCM270X_DT-Add-overlay-for-enc28j60-on-SPI2.patch new file mode 100644 index 00000000000..8aea6e4ea2b --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0556-BCM270X_DT-Add-overlay-for-enc28j60-on-SPI2.patch @@ -0,0 +1,108 @@ +From ea006f68522d82b294094fd29585b16290758d29 Mon Sep 17 00:00:00 2001 +From: Alan Yiding Wang +Date: Sat, 3 Dec 2016 23:22:02 -0500 +Subject: [PATCH] BCM270X_DT: Add overlay for enc28j60 on SPI2 + +Works on SPI2 for compute module +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 10 ++++- + .../boot/dts/overlays/enc28j60-spi2-overlay.dts | 47 ++++++++++++++++++++++ + 3 files changed, 57 insertions(+), 1 deletion(-) + create mode 100644 arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts + +diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile +index 57d60a4..c4186aa 100644 +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -28,6 +28,7 @@ dtbo-$(RPI_DT_OVERLAYS) += dpi24.dtbo + dtbo-$(RPI_DT_OVERLAYS) += dwc-otg.dtbo + dtbo-$(RPI_DT_OVERLAYS) += dwc2.dtbo + dtbo-$(RPI_DT_OVERLAYS) += enc28j60.dtbo ++dtbo-$(RPI_DT_OVERLAYS) += enc28j60-spi2.dtbo + dtbo-$(RPI_DT_OVERLAYS) += gpio-ir.dtbo + dtbo-$(RPI_DT_OVERLAYS) += gpio-poweroff.dtbo + dtbo-$(RPI_DT_OVERLAYS) += hifiberry-amp.dtbo +diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README +index 35c0cec1..4a77ee6 100644 +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -344,13 +344,21 @@ Params: dr_mode Dual role mode: "host", "peripheral" or "otg" + + + Name: enc28j60 +-Info: Overlay for the Microchip ENC28J60 Ethernet Controller (SPI) ++Info: Overlay for the Microchip ENC28J60 Ethernet Controller on SPI0 + Load: dtoverlay=enc28j60,= + Params: int_pin GPIO used for INT (default 25) + + speed SPI bus speed (default 12000000) + + ++Name: enc28j60-spi2 ++Info: Overlay for the Microchip ENC28J60 Ethernet Controller on SPI2 ++Load: dtoverlay=enc28j60-spi2,= ++Params: int_pin GPIO used for INT (default 39) ++ ++ speed SPI bus speed (default 12000000) ++ ++ + Name: gpio-ir + Info: Use GPIO pin as rc-core style infrared receiver input. The rc-core- + based gpio_ir_recv driver maps received keys directly to a +diff --git a/arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts b/arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts +new file mode 100644 +index 0000000..946c9d2 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts +@@ -0,0 +1,47 @@ ++// Overlay for the Microchip ENC28J60 Ethernet Controller - SPI2 Compute Module ++// Interrupt pin: 39 ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&spi2>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ status = "okay"; ++ ++ eth1: enc28j60@0{ ++ compatible = "microchip,enc28j60"; ++ reg = <0>; /* CE0 */ ++ pinctrl-names = "default"; ++ pinctrl-0 = <ð1_pins>; ++ interrupt-parent = <&gpio>; ++ interrupts = <39 0x2>; /* falling edge */ ++ spi-max-frequency = <12000000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ eth1_pins: eth1_pins { ++ brcm,pins = <39>; ++ brcm,function = <0>; /* in */ ++ brcm,pull = <0>; /* none */ ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ int_pin = <ð1>, "interrupts:0", ++ <ð1_pins>, "brcm,pins:0"; ++ speed = <ð1>, "spi-max-frequency:0"; ++ }; ++}; +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0557-lirc_rpi-Delete-vestigial-gpio_in_pull-parameter.patch b/target/linux/brcm2708/patches-4.4/0557-lirc_rpi-Delete-vestigial-gpio_in_pull-parameter.patch new file mode 100644 index 00000000000..9ebcc222391 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0557-lirc_rpi-Delete-vestigial-gpio_in_pull-parameter.patch @@ -0,0 +1,43 @@ +From a5cf7bed6a2d7267e2f0a3109807051e166930fb Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 5 Dec 2016 09:58:16 +0000 +Subject: [PATCH] lirc_rpi: Delete vestigial gpio_in_pull parameter + +The RPi GPIO no longer support run-time "pull" settings - one should +Device Tree and pinctrl instead - so remove the parameter to avoid +confusion. + +See: https://github.com/raspberrypi/linux/issues/1711 + +Signed-off-by: Phil Elwell +--- + drivers/staging/media/lirc/lirc_rpi.c | 6 ------ + 1 file changed, 6 deletions(-) + +diff --git a/drivers/staging/media/lirc/lirc_rpi.c b/drivers/staging/media/lirc/lirc_rpi.c +index 6132896..ebbf0d6 100644 +--- a/drivers/staging/media/lirc/lirc_rpi.c ++++ b/drivers/staging/media/lirc/lirc_rpi.c +@@ -64,8 +64,6 @@ + + /* set the default GPIO input pin */ + static int gpio_in_pin = 18; +-/* set the default pull behaviour for input pin */ +-static int gpio_in_pull = BCM2708_PULL_DOWN; + /* set the default GPIO output pin */ + static int gpio_out_pin = 17; + /* enable debugging messages */ +@@ -716,10 +714,6 @@ module_param(gpio_in_pin, int, S_IRUGO); + MODULE_PARM_DESC(gpio_in_pin, "GPIO input pin number of the BCM processor." + " (default 18"); + +-module_param(gpio_in_pull, int, S_IRUGO); +-MODULE_PARM_DESC(gpio_in_pull, "GPIO input pin pull configuration." +- " (0 = off, 1 = up, 2 = down, default down)"); +- + module_param(sense, int, S_IRUGO); + MODULE_PARM_DESC(sense, "Override autodetection of IR receiver circuit" + " (0 = active high, 1 = active low )"); +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0558-BCM270X_DT-Add-i2c-sensor-overlay.patch b/target/linux/brcm2708/patches-4.4/0558-BCM270X_DT-Add-i2c-sensor-overlay.patch new file mode 100644 index 00000000000..2248fe81133 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0558-BCM270X_DT-Add-i2c-sensor-overlay.patch @@ -0,0 +1,102 @@ +From ec94d922b57bb7d6586eaf1e1af02e9383680d15 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 5 Dec 2016 17:10:44 +0000 +Subject: [PATCH] BCM270X_DT: Add i2c-sensor overlay + +The i2c-sensor overlay is a container for various pressure and +temperature sensors, currently bmp085 and bmp280. The standalone +bmp085_i2c-sensor overlay is now deprecated. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 12 ++++++-- + arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts | 34 +++++++++++++++++++++++ + 3 files changed, 45 insertions(+), 2 deletions(-) + create mode 100644 arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts + +diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile +index c4186aa..bc7f4a9 100644 +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -42,6 +42,7 @@ dtbo-$(RPI_DT_OVERLAYS) += i2c-gpio.dtbo + dtbo-$(RPI_DT_OVERLAYS) += i2c-mux.dtbo + dtbo-$(RPI_DT_OVERLAYS) += i2c-pwm-pca9685a.dtbo + dtbo-$(RPI_DT_OVERLAYS) += i2c-rtc.dtbo ++dtbo-$(RPI_DT_OVERLAYS) += i2c-sensor.dtbo + dtbo-$(RPI_DT_OVERLAYS) += i2c0-bcm2708.dtbo + dtbo-$(RPI_DT_OVERLAYS) += i2c1-bcm2708.dtbo + dtbo-$(RPI_DT_OVERLAYS) += i2s-gpio28-31.dtbo +diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README +index 4a77ee6..80ea3de 100644 +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -283,8 +283,7 @@ Params: swap_lr Reverse the channel allocation, which will also + + + Name: bmp085_i2c-sensor +-Info: Configures the BMP085/BMP180 digital barometric pressure and temperature +- sensors from Bosch Sensortec ++Info: This overlay is now deprecated - see i2c-sensor + Load: dtoverlay=bmp085_i2c-sensor + Params: + +@@ -536,6 +535,15 @@ Params: abx80x Select one of the ABx80x family: + source + + ++Name: i2c-sensor ++Info: Adds support for a number of I2C barometric pressure and temperature ++ sensors on i2c_arm ++Load: dtoverlay=i2c-sensor,= ++Params: bmp085 Select the Bosch sensortronic BMP085 ++ ++ bmp280 Select the Bosch sensortronic BMP280 ++ ++ + Name: i2c0-bcm2708 + Info: Enable the i2c_bcm2708 driver for the i2c0 bus. Not all pin combinations + are usable on all platforms. +diff --git a/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts +new file mode 100644 +index 0000000..f6d134c +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts +@@ -0,0 +1,34 @@ ++// Definitions for a few digital barometric pressure and temperature sensors ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ bmp085: bmp085@77 { ++ compatible = "bosch,bmp085"; ++ reg = <0x77>; ++ default-oversampling = <3>; ++ status = "disable"; ++ }; ++ ++ bmp280: bmp280@76 { ++ compatible = "bosch,bmp280"; ++ reg = <0x76>; ++ status = "disable"; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ bmp085 = <&bmp085>,"status"; ++ bmp280 = <&bmp280>,"status"; ++ }; ++}; +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0559-BCM270X_DT-overlays-overlay.dtb-overlays-.dtbo-1752.patch b/target/linux/brcm2708/patches-4.4/0559-BCM270X_DT-overlays-overlay.dtb-overlays-.dtbo-1752.patch new file mode 100644 index 00000000000..4b40d642609 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0559-BCM270X_DT-overlays-overlay.dtb-overlays-.dtbo-1752.patch @@ -0,0 +1,26 @@ +From 32b74f9dc3caa9d3422ffa735db0ecf088dbffbe Mon Sep 17 00:00:00 2001 +From: Georgii Staroselskii +Date: Wed, 7 Dec 2016 15:10:27 +0300 +Subject: [PATCH] BCM270X_DT: overlays/*-overlay.dtb -> overlays/*.dtbo (#1752) + +We now create overlays as .dtbo files. +--- + arch/arm/boot/dts/overlays/README | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README +index 80ea3de..7aee1af 100644 +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -61,7 +61,7 @@ this becomes a line in config.txt: + + dtoverlay=lirc-rpi + +-This causes the file /boot/overlays/lirc-rpi-overlay.dtb to be loaded. By ++This causes the file /boot/overlays/lirc-rpi.dtbo to be loaded. By + default it will use GPIOs 17 (out) and 18 (in), but this can be modified using + DT parameters: + +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0560-Revert-HID-dragonrise-fix-HID-Descriptor-for-0x0006-.patch b/target/linux/brcm2708/patches-4.4/0560-Revert-HID-dragonrise-fix-HID-Descriptor-for-0x0006-.patch new file mode 100644 index 00000000000..adfb1f6b17c --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0560-Revert-HID-dragonrise-fix-HID-Descriptor-for-0x0006-.patch @@ -0,0 +1,104 @@ +From e7b5643bfddd3ce80f4ade03a980da6b8979136d Mon Sep 17 00:00:00 2001 +From: Ioan-Adrian Ratiu +Date: Tue, 27 Sep 2016 21:41:37 +0300 +Subject: [PATCH] Revert "HID: dragonrise: fix HID Descriptor for 0x0006 PID" + +[ Upstream commit 1bcaa05ebee115213e34f1806cc6a4f7a6175a88 ] +This reverts commit 18339f59c3a6 ("HID: dragonrise: fix HID...") because it +breaks certain dragonrise 0079:0006 gamepads. While it may fix a breakage +caused by commit 79346d620e9d ("HID: input: force generic axis to be mapped +to their user space axis"), it is probable that the manufacturer released +different hardware with the same PID so this fix works for only a subset +and breaks the other gamepads sharing the PID. + +What is needed is another more generic solution which fixes 79346d620e9d +("HID: input: force generic axis ...") breakage for this controller: we +need to add an exception for this driver to make it keep the old behaviour +previous to the initial breakage (this is done in patch 2 of this series). + +Signed-off-by: Ioan-Adrian Ratiu +Reviewed-by: Benjamin Tissoires +Signed-off-by: Jiri Kosina +--- + drivers/hid/hid-dr.c | 58 ---------------------------------------------------- + 1 file changed, 58 deletions(-) + +diff --git a/drivers/hid/hid-dr.c b/drivers/hid/hid-dr.c +index 1d78ba3..ce06444 100644 +--- a/drivers/hid/hid-dr.c ++++ b/drivers/hid/hid-dr.c +@@ -234,58 +234,6 @@ static __u8 pid0011_rdesc_fixed[] = { + 0xC0 /* End Collection */ + }; + +-static __u8 pid0006_rdesc_fixed[] = { +- 0x05, 0x01, /* Usage Page (Generic Desktop) */ +- 0x09, 0x04, /* Usage (Joystick) */ +- 0xA1, 0x01, /* Collection (Application) */ +- 0xA1, 0x02, /* Collection (Logical) */ +- 0x75, 0x08, /* Report Size (8) */ +- 0x95, 0x05, /* Report Count (5) */ +- 0x15, 0x00, /* Logical Minimum (0) */ +- 0x26, 0xFF, 0x00, /* Logical Maximum (255) */ +- 0x35, 0x00, /* Physical Minimum (0) */ +- 0x46, 0xFF, 0x00, /* Physical Maximum (255) */ +- 0x09, 0x30, /* Usage (X) */ +- 0x09, 0x33, /* Usage (Ry) */ +- 0x09, 0x32, /* Usage (Z) */ +- 0x09, 0x31, /* Usage (Y) */ +- 0x09, 0x34, /* Usage (Ry) */ +- 0x81, 0x02, /* Input (Variable) */ +- 0x75, 0x04, /* Report Size (4) */ +- 0x95, 0x01, /* Report Count (1) */ +- 0x25, 0x07, /* Logical Maximum (7) */ +- 0x46, 0x3B, 0x01, /* Physical Maximum (315) */ +- 0x65, 0x14, /* Unit (Centimeter) */ +- 0x09, 0x39, /* Usage (Hat switch) */ +- 0x81, 0x42, /* Input (Variable) */ +- 0x65, 0x00, /* Unit (None) */ +- 0x75, 0x01, /* Report Size (1) */ +- 0x95, 0x0C, /* Report Count (12) */ +- 0x25, 0x01, /* Logical Maximum (1) */ +- 0x45, 0x01, /* Physical Maximum (1) */ +- 0x05, 0x09, /* Usage Page (Button) */ +- 0x19, 0x01, /* Usage Minimum (0x01) */ +- 0x29, 0x0C, /* Usage Maximum (0x0C) */ +- 0x81, 0x02, /* Input (Variable) */ +- 0x06, 0x00, 0xFF, /* Usage Page (Vendor Defined) */ +- 0x75, 0x01, /* Report Size (1) */ +- 0x95, 0x08, /* Report Count (8) */ +- 0x25, 0x01, /* Logical Maximum (1) */ +- 0x45, 0x01, /* Physical Maximum (1) */ +- 0x09, 0x01, /* Usage (0x01) */ +- 0x81, 0x02, /* Input (Variable) */ +- 0xC0, /* End Collection */ +- 0xA1, 0x02, /* Collection (Logical) */ +- 0x75, 0x08, /* Report Size (8) */ +- 0x95, 0x07, /* Report Count (7) */ +- 0x46, 0xFF, 0x00, /* Physical Maximum (255) */ +- 0x26, 0xFF, 0x00, /* Logical Maximum (255) */ +- 0x09, 0x02, /* Usage (0x02) */ +- 0x91, 0x02, /* Output (Variable) */ +- 0xC0, /* End Collection */ +- 0xC0 /* End Collection */ +-}; +- + static __u8 *dr_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) + { +@@ -296,12 +244,6 @@ static __u8 *dr_report_fixup(struct hid_device *hdev, __u8 *rdesc, + *rsize = sizeof(pid0011_rdesc_fixed); + } + break; +- case 0x0006: +- if (*rsize == sizeof(pid0006_rdesc_fixed)) { +- rdesc = pid0006_rdesc_fixed; +- *rsize = sizeof(pid0006_rdesc_fixed); +- } +- break; + } + return rdesc; + } +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0561-bcm2835-rng-Avoid-initialising-if-already-enabled.patch b/target/linux/brcm2708/patches-4.4/0561-bcm2835-rng-Avoid-initialising-if-already-enabled.patch new file mode 100644 index 00000000000..2892aea6569 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0561-bcm2835-rng-Avoid-initialising-if-already-enabled.patch @@ -0,0 +1,31 @@ +From b7791eea502e0d98ae204750aff2abafc431fb11 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Tue, 6 Dec 2016 17:05:39 +0000 +Subject: [PATCH] bcm2835-rng: Avoid initialising if already enabled + +Avoids the 0x40000 cycles of warmup again if firmware has already used it +--- + drivers/char/hw_random/bcm2835-rng.c | 7 ++++--- + 1 file changed, 4 insertions(+), 3 deletions(-) + +diff --git a/drivers/char/hw_random/bcm2835-rng.c b/drivers/char/hw_random/bcm2835-rng.c +index 7192ec2..2ff49c1 100644 +--- a/drivers/char/hw_random/bcm2835-rng.c ++++ b/drivers/char/hw_random/bcm2835-rng.c +@@ -62,9 +62,10 @@ static int bcm2835_rng_probe(struct platform_device *pdev) + bcm2835_rng_ops.priv = (unsigned long)rng_base; + + /* set warm-up count & enable */ +- __raw_writel(RNG_WARMUP_COUNT, rng_base + RNG_STATUS); +- __raw_writel(RNG_RBGEN, rng_base + RNG_CTRL); +- ++ if (!(__raw_readl(rng_base + RNG_CTRL) & RNG_RBGEN)) { ++ __raw_writel(RNG_WARMUP_COUNT, rng_base + RNG_STATUS); ++ __raw_writel(RNG_RBGEN, rng_base + RNG_CTRL); ++ } + /* register driver */ + err = hwrng_register(&bcm2835_rng_ops); + if (err) { +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0562-Pisound-dynamic-overlay-1760.patch b/target/linux/brcm2708/patches-4.4/0562-Pisound-dynamic-overlay-1760.patch new file mode 100644 index 00000000000..b1aa05f90ef --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0562-Pisound-dynamic-overlay-1760.patch @@ -0,0 +1,151 @@ +From cdf6acdd6a6270538b0fdd08e79986d4a553062a Mon Sep 17 00:00:00 2001 +From: gtrainavicius +Date: Sat, 10 Dec 2016 16:05:25 +0200 +Subject: [PATCH] Pisound dynamic overlay (#1760) + +Restructuring pisound-overlay.dts, so it can be loaded and unloaded dynamically using dtoverlay. + +Print a logline when the kernel module is removed. +--- + arch/arm/boot/dts/overlays/pisound-overlay.dts | 94 ++++++++++++++------------ + sound/soc/bcm/pisound.c | 2 + + 2 files changed, 52 insertions(+), 44 deletions(-) + +diff --git a/arch/arm/boot/dts/overlays/pisound-overlay.dts b/arch/arm/boot/dts/overlays/pisound-overlay.dts +index 7cdfc29..5197e65 100644 +--- a/arch/arm/boot/dts/overlays/pisound-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pisound-overlay.dts +@@ -26,6 +26,54 @@ + compatible = "brcm,bcm2708"; + + fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&spi0>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pisound_spi: pisound_spi@0{ ++ compatible = "blokaslabs,pisound-spi"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins>; ++ spi-max-frequency = <1000000>; ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target-path = "/"; ++ __overlay__ { ++ pcm5102a-codec { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5102a"; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@5 { + target = <&sound>; + __overlay__ { + compatible = "blokaslabs,pisound"; +@@ -49,7 +97,7 @@ + }; + }; + +- fragment@1 { ++ fragment@6 { + target = <&gpio>; + __overlay__ { + pinctrl-names = "default"; +@@ -63,52 +111,10 @@ + }; + }; + +- fragment@2 { ++ fragment@7 { + target = <&i2s>; + __overlay__ { + status = "okay"; + }; + }; +- +- fragment@3 { +- target-path = "/"; +- __overlay__ { +- pcm5102a-codec { +- #sound-dai-cells = <0>; +- compatible = "ti,pcm5102a"; +- status = "okay"; +- }; +- }; +- }; +- +- fragment@4 { +- target = <&spi0>; +- __overlay__ { +- status = "okay"; +- +- spidev@0{ +- status = "disabled"; +- }; +- +- spidev@1{ +- status = "okay"; +- }; +- }; +- }; +- +- fragment@5 { +- target = <&spi0>; +- __overlay__ { +- #address-cells = <1>; +- #size-cells = <0>; +- +- pisound_spi: pisound_spi@0{ +- compatible = "blokaslabs,pisound-spi"; +- reg = <0>; +- pinctrl-names = "default"; +- pinctrl-0 = <&spi0_pins>; +- spi-max-frequency = <1000000>; +- }; +- }; +- }; + }; +diff --git a/sound/soc/bcm/pisound.c b/sound/soc/bcm/pisound.c +index a3cd089..30903fcf 100644 +--- a/sound/soc/bcm/pisound.c ++++ b/sound/soc/bcm/pisound.c +@@ -954,6 +954,8 @@ static int pisnd_probe(struct platform_device *pdev) + + static int pisnd_remove(struct platform_device *pdev) + { ++ printi("Unloading.\n"); ++ + if (pisnd_kobj) { + kobject_put(pisnd_kobj); + pisnd_kobj = NULL; +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0563-Add-support-for-Silicon-Labs-Si7013-20-21-humidity-t.patch b/target/linux/brcm2708/patches-4.4/0563-Add-support-for-Silicon-Labs-Si7013-20-21-humidity-t.patch new file mode 100644 index 00000000000..574702aa060 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0563-Add-support-for-Silicon-Labs-Si7013-20-21-humidity-t.patch @@ -0,0 +1,95 @@ +From 72b5fe0084ce231fc0325cdf6151da0e83f5ef4e Mon Sep 17 00:00:00 2001 +From: Alex Tucker +Date: Tue, 3 Jan 2017 21:30:41 +0000 +Subject: [PATCH] Add support for Silicon Labs Si7013/20/21 + humidity/temperature sensor. (#1765) + +--- + arch/arm/boot/dts/overlays/README | 3 ++ + arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts | 49 +++++++++++++---------- + 2 files changed, 31 insertions(+), 21 deletions(-) + +diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README +index 7aee1af..44ad21f 100644 +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -543,6 +543,9 @@ Params: bmp085 Select the Bosch sensortronic BMP085 + + bmp280 Select the Bosch sensortronic BMP280 + ++ si7020 Select the Silicon Labs Si7013/20/21 humidity/ ++ temperature sensor ++ + + Name: i2c0-bcm2708 + Info: Enable the i2c_bcm2708 driver for the i2c0 bus. Not all pin combinations +diff --git a/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts +index f6d134c..31bda8d 100644 +--- a/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts +@@ -1,34 +1,41 @@ +-// Definitions for a few digital barometric pressure and temperature sensors ++// Definitions for I2C based sensors using the Industrial IO interface. + /dts-v1/; + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2708"; + +- fragment@0 { +- target = <&i2c_arm>; +- __overlay__ { +- #address-cells = <1>; +- #size-cells = <0>; +- status = "okay"; ++ fragment@0 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; + +- bmp085: bmp085@77 { +- compatible = "bosch,bmp085"; +- reg = <0x77>; +- default-oversampling = <3>; +- status = "disable"; +- }; ++ bmp085: bmp085@77 { ++ compatible = "bosch,bmp085"; ++ reg = <0x77>; ++ default-oversampling = <3>; ++ status = "disable"; ++ }; + +- bmp280: bmp280@76 { +- compatible = "bosch,bmp280"; +- reg = <0x76>; +- status = "disable"; +- }; +- }; +- }; ++ bmp280: bmp280@76 { ++ compatible = "bosch,bmp280"; ++ reg = <0x76>; ++ status = "disable"; ++ }; ++ ++ si7020: si7020@40 { ++ compatible = "si7020"; ++ reg = <0x40>; ++ status = "disable"; ++ }; ++ }; ++ }; + + __overrides__ { + bmp085 = <&bmp085>,"status"; + bmp280 = <&bmp280>,"status"; ++ si7020 = <&si7020>,"status"; + }; + }; +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0564-pisound-improvements-1778.patch b/target/linux/brcm2708/patches-4.4/0564-pisound-improvements-1778.patch new file mode 100644 index 00000000000..4b6c569de0c --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0564-pisound-improvements-1778.patch @@ -0,0 +1,299 @@ +From ed621cdfdf0a5acf35079208818c9648f44ec638 Mon Sep 17 00:00:00 2001 +From: gtrainavicius +Date: Thu, 5 Jan 2017 17:08:45 +0200 +Subject: [PATCH] pisound improvements: (#1778) + +* Added a writable sysfs object to enable scripts / user space software +to blink MIDI activity LEDs for variable duration. +* Improved hw_param constraints setting. +* Added compatibility with S16_LE sample format. +* Exposed some simple placeholder volume controls, so the card appears +in volumealsa widget. + +Signed-off-by: Giedrius Trainavicius +--- + sound/soc/bcm/pisound.c | 175 ++++++++++++++++++++++++++++++++++++++++++------ + 1 file changed, 154 insertions(+), 21 deletions(-) + +diff --git a/sound/soc/bcm/pisound.c b/sound/soc/bcm/pisound.c +index 30903fcf..d317eb9 100644 +--- a/sound/soc/bcm/pisound.c ++++ b/sound/soc/bcm/pisound.c +@@ -36,6 +36,7 @@ + #include + #include + #include ++#include + + static int pisnd_spi_init(struct device *dev); + static void pisnd_spi_uninit(void); +@@ -214,6 +215,9 @@ static char g_serial_num[11]; + static char g_id[25]; + static char g_version[5]; + ++static uint8_t g_ledFlashDuration; ++static bool g_ledFlashDurationChanged; ++ + DEFINE_KFIFO(spi_fifo_in, uint8_t, FIFO_SIZE); + DEFINE_KFIFO(spi_fifo_out, uint8_t, FIFO_SIZE); + +@@ -396,8 +400,13 @@ static void pisnd_work_handler(struct work_struct *work) + val = 0; + tx = 0; + +- if (kfifo_get(&spi_fifo_out, &val)) ++ if (g_ledFlashDurationChanged) { ++ tx = 0xf000 | g_ledFlashDuration; ++ g_ledFlashDuration = 0; ++ g_ledFlashDurationChanged = false; ++ } else if (kfifo_get(&spi_fifo_out, &val)) { + tx = 0x0f00 | val; ++ } + + rx = spi_transfer16(tx); + +@@ -410,6 +419,7 @@ static void pisnd_work_handler(struct work_struct *work) + } while (rx != 0 + || !kfifo_is_empty(&spi_fifo_out) + || pisnd_spi_has_more() ++ || g_ledFlashDurationChanged + ); + + if (!kfifo_is_empty(&spi_fifo_in) && g_recvCallback) +@@ -569,7 +579,7 @@ static int pisnd_spi_init(struct device *dev) + } + + /* Flash the LEDs. */ +- spi_transfer16(0xf000); ++ spi_transfer16(0xf008); + + ret = pisnd_spi_gpio_irq_init(dev); + if (ret < 0) { +@@ -610,6 +620,14 @@ static void pisnd_spi_uninit(void) + pisnd_spi_gpio_uninit(); + } + ++static void pisnd_spi_flash_leds(uint8_t duration) ++{ ++ g_ledFlashDuration = duration; ++ g_ledFlashDurationChanged = true; ++ printd("schedule from spi_flash_leds\n"); ++ pisnd_schedule_process(TASK_PROCESS); ++} ++ + static void pisnd_spi_send(uint8_t val) + { + kfifo_put(&spi_fifo_out, val); +@@ -658,6 +676,83 @@ static const struct of_device_id pisound_of_match[] = { + {}, + }; + ++enum { ++ SWITCH = 0, ++ VOLUME = 1, ++}; ++ ++static int pisnd_ctl_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ if (kcontrol->private_value == SWITCH) { ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; ++ uinfo->count = 1; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = 1; ++ return 0; ++ } else if (kcontrol->private_value == VOLUME) { ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; ++ uinfo->count = 1; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = 100; ++ return 0; ++ } ++ return -EINVAL; ++} ++ ++static int pisnd_ctl_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ if (kcontrol->private_value == SWITCH) { ++ ucontrol->value.integer.value[0] = 1; ++ return 0; ++ } else if (kcontrol->private_value == VOLUME) { ++ ucontrol->value.integer.value[0] = 100; ++ return 0; ++ } ++ ++ return -EINVAL; ++} ++ ++static struct snd_kcontrol_new pisnd_ctl[] = { ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "PCM Playback Switch", ++ .index = 0, ++ .private_value = SWITCH, ++ .access = SNDRV_CTL_ELEM_ACCESS_READ, ++ .info = pisnd_ctl_info, ++ .get = pisnd_ctl_get, ++ }, ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "PCM Playback Volume", ++ .index = 0, ++ .private_value = VOLUME, ++ .access = SNDRV_CTL_ELEM_ACCESS_READ, ++ .info = pisnd_ctl_info, ++ .get = pisnd_ctl_get, ++ }, ++}; ++ ++static int pisnd_ctl_init(struct snd_card *card) ++{ ++ int err, i; ++ ++ for (i = 0; i < ARRAY_SIZE(pisnd_ctl); ++i) { ++ err = snd_ctl_add(card, snd_ctl_new1(&pisnd_ctl[i], NULL)); ++ if (err < 0) ++ return err; ++ } ++ ++ return 0; ++} ++ ++static int pisnd_ctl_uninit(void) ++{ ++ return 0; ++} ++ + static struct gpio_desc *osr0, *osr1, *osr2; + static struct gpio_desc *reset; + static struct gpio_desc *button; +@@ -667,6 +762,14 @@ static int pisnd_hw_params( + struct snd_pcm_hw_params *params + ) + { ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ /* pisound runs on fixed 32 clock counts per channel, ++ * as generated by the master ADC. ++ */ ++ snd_soc_dai_set_bclk_ratio(cpu_dai, 32*2); ++ + printd("rate = %d\n", params_rate(params)); + printd("ch = %d\n", params_channels(params)); + printd("bits = %u\n", +@@ -711,16 +814,6 @@ static struct snd_pcm_hw_constraint_list constraints_rates = { + .mask = 0, + }; + +-static unsigned int sample_bits[] = { +- 24, 32 +-}; +- +-static struct snd_pcm_hw_constraint_list constraints_sample_bits = { +- .count = ARRAY_SIZE(sample_bits), +- .list = sample_bits, +- .mask = 0, +-}; +- + static int pisnd_startup(struct snd_pcm_substream *substream) + { + int err = snd_pcm_hw_constraint_list( +@@ -733,11 +826,21 @@ static int pisnd_startup(struct snd_pcm_substream *substream) + if (err < 0) + return err; + +- err = snd_pcm_hw_constraint_list( ++ err = snd_pcm_hw_constraint_single( + substream->runtime, +- 0, +- SNDRV_PCM_HW_PARAM_SAMPLE_BITS, +- &constraints_sample_bits ++ SNDRV_PCM_HW_PARAM_CHANNELS, ++ 2 ++ ); ++ ++ if (err < 0) ++ return err; ++ ++ err = snd_pcm_hw_constraint_mask64( ++ substream->runtime, ++ SNDRV_PCM_HW_PARAM_FORMAT, ++ SNDRV_PCM_FMTBIT_S16_LE | ++ SNDRV_PCM_FMTBIT_S24_LE | ++ SNDRV_PCM_FMTBIT_S32_LE + ); + + if (err < 0) +@@ -771,14 +874,23 @@ static int pisnd_card_probe(struct snd_soc_card *card) + { + int err = pisnd_midi_init(card->snd_card); + +- if (err < 0) ++ if (err < 0) { + printe("pisnd_midi_init failed: %d\n", err); ++ return err; ++ } + +- return err; ++ err = pisnd_ctl_init(card->snd_card); ++ if (err < 0) { ++ printe("pisnd_ctl_init failed: %d\n", err); ++ return err; ++ } ++ ++ return 0; + } + + static int pisnd_card_remove(struct snd_soc_card *card) + { ++ pisnd_ctl_uninit(); + pisnd_midi_uninit(); + return 0; + } +@@ -870,17 +982,38 @@ static ssize_t pisnd_version_show( + return sprintf(buf, "%s\n", pisnd_spi_get_version()); + } + ++static ssize_t pisnd_led_store( ++ struct kobject *kobj, ++ struct kobj_attribute *attr, ++ const char *buf, ++ size_t length ++ ) ++{ ++ uint32_t timeout; ++ int err; ++ ++ err = kstrtou32(buf, 10, &timeout); ++ ++ if (err == 0 && timeout <= 255) ++ pisnd_spi_flash_leds(timeout); ++ ++ return length; ++} ++ + static struct kobj_attribute pisnd_serial_attribute = +- __ATTR(serial, 0644, pisnd_serial_show, NULL); ++ __ATTR(serial, 0444, pisnd_serial_show, NULL); + static struct kobj_attribute pisnd_id_attribute = +- __ATTR(id, 0644, pisnd_id_show, NULL); ++ __ATTR(id, 0444, pisnd_id_show, NULL); + static struct kobj_attribute pisnd_version_attribute = +- __ATTR(version, 0644, pisnd_version_show, NULL); ++ __ATTR(version, 0444, pisnd_version_show, NULL); ++static struct kobj_attribute pisnd_led_attribute = ++ __ATTR(led, 0644, NULL, pisnd_led_store); + + static struct attribute *attrs[] = { + &pisnd_serial_attribute.attr, + &pisnd_id_attribute.attr, + &pisnd_version_attribute.attr, ++ &pisnd_led_attribute.attr, + NULL + }; + +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0565-Add-driver_name-properties-to-JustBoom-drivers-1787.patch b/target/linux/brcm2708/patches-4.4/0565-Add-driver_name-properties-to-JustBoom-drivers-1787.patch new file mode 100644 index 00000000000..cee61801110 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0565-Add-driver_name-properties-to-JustBoom-drivers-1787.patch @@ -0,0 +1,39 @@ +From 0ec03b021ee12ab6c30bcc8cb617cc4b87384d25 Mon Sep 17 00:00:00 2001 +From: Aaron Shaw +Date: Tue, 10 Jan 2017 16:22:53 +0000 +Subject: [PATCH] Add driver_name properties to JustBoom drivers (#1787) + +Add driver name properties for use with 5.1 passthrough audio in LibreElec +and other Kodi based OSs +--- + sound/soc/bcm/justboom-dac.c | 1 + + sound/soc/bcm/justboom-digi.c | 1 + + 2 files changed, 2 insertions(+) + +diff --git a/sound/soc/bcm/justboom-dac.c b/sound/soc/bcm/justboom-dac.c +index 8fd50db..05a224e 100644 +--- a/sound/soc/bcm/justboom-dac.c ++++ b/sound/soc/bcm/justboom-dac.c +@@ -98,6 +98,7 @@ static struct snd_soc_dai_link snd_rpi_justboom_dac_dai[] = { + /* audio machine driver */ + static struct snd_soc_card snd_rpi_justboom_dac = { + .name = "snd_rpi_justboom_dac", ++ .driver_name = "JustBoomDac", + .owner = THIS_MODULE, + .dai_link = snd_rpi_justboom_dac_dai, + .num_links = ARRAY_SIZE(snd_rpi_justboom_dac_dai), +diff --git a/sound/soc/bcm/justboom-digi.c b/sound/soc/bcm/justboom-digi.c +index 91acb66..abfdc5c 100644 +--- a/sound/soc/bcm/justboom-digi.c ++++ b/sound/soc/bcm/justboom-digi.c +@@ -154,6 +154,7 @@ static struct snd_soc_dai_link snd_rpi_justboom_digi_dai[] = { + /* audio machine driver */ + static struct snd_soc_card snd_rpi_justboom_digi = { + .name = "snd_rpi_justboom_digi", ++ .driver_name = "JustBoomDigi", + .owner = THIS_MODULE, + .dai_link = snd_rpi_justboom_digi_dai, + .num_links = ARRAY_SIZE(snd_rpi_justboom_digi_dai), +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0566-bcm2835-i2s-Changes-for-allowing-asymmetric-sample-f.patch b/target/linux/brcm2708/patches-4.4/0566-bcm2835-i2s-Changes-for-allowing-asymmetric-sample-f.patch new file mode 100644 index 00000000000..e4357188825 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0566-bcm2835-i2s-Changes-for-allowing-asymmetric-sample-f.patch @@ -0,0 +1,101 @@ +From b97a67a14e5c5904b84e52150e0d13da794fc9d7 Mon Sep 17 00:00:00 2001 +From: gtrainavicius +Date: Tue, 10 Jan 2017 21:59:39 +0200 +Subject: [PATCH] bcm2835-i2s: Changes for allowing asymmetric sample formats. + (#1783) + +This is achieved by making changes only to the requested +stream direction format, keeping the other stream direction +configuration intact. + +Signed-off-by: Giedrius Trainavicius +--- + sound/soc/bcm/bcm2835-i2s.c | 54 +++++++++++++++++++++++++++++++-------------- + 1 file changed, 38 insertions(+), 16 deletions(-) + +diff --git a/sound/soc/bcm/bcm2835-i2s.c b/sound/soc/bcm/bcm2835-i2s.c +index aedb01f..d2b0801 100644 +--- a/sound/soc/bcm/bcm2835-i2s.c ++++ b/sound/soc/bcm/bcm2835-i2s.c +@@ -310,6 +310,7 @@ static int bcm2835_i2s_hw_params(struct snd_pcm_substream *substream, + unsigned int sampling_rate = params_rate(params); + unsigned int data_length, data_delay, bclk_ratio; + unsigned int ch1pos, ch2pos, mode, format; ++ unsigned int previous_ftxp, previous_frxp; + unsigned int mash = BCM2835_CLK_MASH_1; + unsigned int divi, divf, target_frequency; + int clk_src = -1; +@@ -320,6 +321,7 @@ static int bcm2835_i2s_hw_params(struct snd_pcm_substream *substream, + bool frame_master = (master == SND_SOC_DAIFMT_CBS_CFS + || master == SND_SOC_DAIFMT_CBM_CFS); + uint32_t csreg; ++ bool packed; + + /* + * If a stream is already enabled, +@@ -465,26 +467,46 @@ static int bcm2835_i2s_hw_params(struct snd_pcm_substream *substream, + return -EINVAL; + } + +- /* +- * Set format for both streams. +- * We cannot set another frame length +- * (and therefore word length) anyway, +- * so the format will be the same. +- */ +- regmap_write(dev->i2s_regmap, BCM2835_I2S_RXC_A_REG, format); +- regmap_write(dev->i2s_regmap, BCM2835_I2S_TXC_A_REG, format); ++ /* Set the format for the matching stream direction. */ ++ switch (substream->stream) { ++ case SNDRV_PCM_STREAM_PLAYBACK: ++ regmap_write(dev->i2s_regmap, BCM2835_I2S_TXC_A_REG, format); ++ break; ++ case SNDRV_PCM_STREAM_CAPTURE: ++ regmap_write(dev->i2s_regmap, BCM2835_I2S_RXC_A_REG, format); ++ break; ++ default: ++ return -EINVAL; ++ } + + /* Setup the I2S mode */ ++ /* Keep existing FTXP and FRXP values. */ ++ regmap_read(dev->i2s_regmap, BCM2835_I2S_MODE_A_REG, &mode); ++ ++ previous_ftxp = mode & BCM2835_I2S_FTXP; ++ previous_frxp = mode & BCM2835_I2S_FRXP; ++ + mode = 0; + +- if (data_length <= 16) { +- /* +- * Use frame packed mode (2 channels per 32 bit word) +- * We cannot set another frame length in the second stream +- * (and therefore word length) anyway, +- * so the format will be the same. +- */ +- mode |= BCM2835_I2S_FTXP | BCM2835_I2S_FRXP; ++ /* ++ * Retain the frame packed mode (2 channels per 32 bit word) ++ * of the other direction stream intact. The formats of each ++ * direction can be different as long as the frame length is ++ * shared for both. ++ */ ++ packed = data_length <= 16; ++ ++ switch (substream->stream) { ++ case SNDRV_PCM_STREAM_PLAYBACK: ++ mode |= previous_frxp; ++ mode |= packed ? BCM2835_I2S_FTXP : 0; ++ break; ++ case SNDRV_PCM_STREAM_CAPTURE: ++ mode |= previous_ftxp; ++ mode |= packed ? BCM2835_I2S_FRXP : 0; ++ break; ++ default: ++ return -EINVAL; + } + + mode |= BCM2835_I2S_FLEN(bclk_ratio - 1); +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0567-BCM270X_DT-Add-pi3-disable-wifi-overlay.patch b/target/linux/brcm2708/patches-4.4/0567-BCM270X_DT-Add-pi3-disable-wifi-overlay.patch new file mode 100644 index 00000000000..13aa1bd659d --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0567-BCM270X_DT-Add-pi3-disable-wifi-overlay.patch @@ -0,0 +1,66 @@ +From 2abc666d62828bbc2889f31ebfb3754a55a51fb9 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 11 Jan 2017 13:01:21 +0000 +Subject: [PATCH] BCM270X_DT: Add pi3-disable-wifi overlay + +pi3-disable-wifi is a minimal overlay to disable the onboard WiFi. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 6 ++++++ + arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts | 13 +++++++++++++ + 3 files changed, 20 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts + +diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile +index bc7f4a9..05eda03 100644 +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -61,6 +61,7 @@ dtbo-$(RPI_DT_OVERLAYS) += mmc.dtbo + dtbo-$(RPI_DT_OVERLAYS) += mz61581.dtbo + dtbo-$(RPI_DT_OVERLAYS) += pi3-act-led.dtbo + dtbo-$(RPI_DT_OVERLAYS) += pi3-disable-bt.dtbo ++dtbo-$(RPI_DT_OVERLAYS) += pi3-disable-wifi.dtbo + dtbo-$(RPI_DT_OVERLAYS) += pi3-miniuart-bt.dtbo + dtbo-$(RPI_DT_OVERLAYS) += piscreen.dtbo + dtbo-$(RPI_DT_OVERLAYS) += piscreen2r.dtbo +diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README +index 44ad21f..adb86bc 100644 +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -793,6 +793,12 @@ Load: dtoverlay=pi3-disable-bt + Params: + + ++Name: pi3-disable-wifi ++Info: Disable Pi3 onboard WiFi ++Load: dtoverlay=pi3-disable-wifi ++Params: ++ ++ + Name: pi3-miniuart-bt + Info: Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore + UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum +diff --git a/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts b/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts +new file mode 100644 +index 0000000..0171995 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts +@@ -0,0 +1,13 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&mmc>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++}; +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0568-configfs-Remove-ppos-increment-in-configfs_write_bin.patch b/target/linux/brcm2708/patches-4.4/0568-configfs-Remove-ppos-increment-in-configfs_write_bin.patch new file mode 100644 index 00000000000..fcc2d604bf1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0568-configfs-Remove-ppos-increment-in-configfs_write_bin.patch @@ -0,0 +1,54 @@ +From b928add95c9ddaa70b591da00d129558535d14d3 Mon Sep 17 00:00:00 2001 +From: Marek Vasut +Date: Wed, 18 May 2016 16:16:51 +0200 +Subject: [PATCH] configfs: Remove ppos increment in configfs_write_bin_file + +[ Back-port of f8608985f851c917b3884b692d8e326b0210d34e ] + +The simple_write_to_buffer() already increments the @ppos on success, +see fs/libfs.c simple_write_to_buffer() comment: + +" +On success, the number of bytes written is returned and the offset @ppos +advanced by this number, or negative value is returned on error. +" + +If the configfs_write_bin_file() is invoked with @count smaller than the +total length of the written binary file, it will be invoked multiple times. +Since configfs_write_bin_file() increments @ppos on success, after calling +simple_write_to_buffer(), the @ppos is incremented twice. + +Subsequent invocation of configfs_write_bin_file() will result in the next +piece of data being written to the offset twice as long as the length of +the previous write, thus creating buffer with "holes" in it. + +The simple testcase using DTO follows: + $ mkdir /sys/kernel/config/device-tree/overlays/1 + $ dd bs=1 if=foo.dtbo of=/sys/kernel/config/device-tree/overlays/1/dtbo +Without this patch, the testcase will result in twice as big buffer in the +kernel, which is then passed to the cfs_overlay_item_dtbo_write() . + +Signed-off-by: Marek Vasut +Cc: Geert Uytterhoeven +Cc: Christoph Hellwig +Cc: Pantelis Antoniou +--- + fs/configfs/file.c | 2 -- + 1 file changed, 2 deletions(-) + +diff --git a/fs/configfs/file.c b/fs/configfs/file.c +index 3687187..6e322f2 100644 +--- a/fs/configfs/file.c ++++ b/fs/configfs/file.c +@@ -357,8 +357,6 @@ configfs_write_bin_file(struct file *file, const char __user *buf, + + len = simple_write_to_buffer(buffer->bin_buffer, + buffer->bin_buffer_size, ppos, buf, count); +- if (len > 0) +- *ppos += len; + out: + mutex_unlock(&buffer->mutex); + return len; +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0569-config-Add-CONFIG_DM_CACHE.patch b/target/linux/brcm2708/patches-4.4/0569-config-Add-CONFIG_DM_CACHE.patch new file mode 100644 index 00000000000..929a12a5292 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0569-config-Add-CONFIG_DM_CACHE.patch @@ -0,0 +1,38 @@ +From d560d7f385d0988d7747e9078a2330e4db4f28b8 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Sun, 15 Jan 2017 21:56:59 +0000 +Subject: [PATCH] config: Add CONFIG_DM_CACHE See: + https://github.com/raspberrypi/linux/issues/1793 + +--- + arch/arm/configs/bcm2709_defconfig | 1 + + arch/arm/configs/bcmrpi_defconfig | 1 + + 2 files changed, 2 insertions(+) + +diff --git a/arch/arm/configs/bcm2709_defconfig b/arch/arm/configs/bcm2709_defconfig +index c7606f2..0d07eed 100644 +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -438,6 +438,7 @@ CONFIG_BLK_DEV_DM=m + CONFIG_DM_CRYPT=m + CONFIG_DM_SNAPSHOT=m + CONFIG_DM_THIN_PROVISIONING=m ++CONFIG_DM_CACHE=m + CONFIG_DM_MIRROR=m + CONFIG_DM_LOG_USERSPACE=m + CONFIG_DM_RAID=m +diff --git a/arch/arm/configs/bcmrpi_defconfig b/arch/arm/configs/bcmrpi_defconfig +index 8121ad2..51640cb 100644 +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -431,6 +431,7 @@ CONFIG_BLK_DEV_DM=m + CONFIG_DM_CRYPT=m + CONFIG_DM_SNAPSHOT=m + CONFIG_DM_THIN_PROVISIONING=m ++CONFIG_DM_CACHE=m + CONFIG_DM_MIRROR=m + CONFIG_DM_LOG_USERSPACE=m + CONFIG_DM_RAID=m +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0570-BCM270X_DT-Add-spi0-cs-overlay.patch b/target/linux/brcm2708/patches-4.4/0570-BCM270X_DT-Add-spi0-cs-overlay.patch new file mode 100644 index 00000000000..3128cf2fcf2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0570-BCM270X_DT-Add-spi0-cs-overlay.patch @@ -0,0 +1,91 @@ +From 1a2339385e478e3ae3ee4f79edbfefd7fd22e96c Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 16 Jan 2017 14:53:12 +0000 +Subject: [PATCH] BCM270X_DT: Add spi0-cs overlay + +The spi0-cs overlay allows the software chip selectts to be modified +using the cs0_pin and cs1_pin parameters. +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 9 +++++++- + arch/arm/boot/dts/overlays/spi0-cs-overlay.dts | 29 ++++++++++++++++++++++++++ + 3 files changed, 38 insertions(+), 1 deletion(-) + create mode 100644 arch/arm/boot/dts/overlays/spi0-cs-overlay.dts + +diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile +index 05eda03..72f2d90a 100644 +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -93,6 +93,7 @@ dtbo-$(RPI_DT_OVERLAYS) += smi-dev.dtbo + dtbo-$(RPI_DT_OVERLAYS) += smi-nand.dtbo + dtbo-$(RPI_DT_OVERLAYS) += spi-gpio35-39.dtbo + dtbo-$(RPI_DT_OVERLAYS) += spi-rtc.dtbo ++dtbo-$(RPI_DT_OVERLAYS) += spi0-cs.dtbo + dtbo-$(RPI_DT_OVERLAYS) += spi0-hw-cs.dtbo + dtbo-$(RPI_DT_OVERLAYS) += spi1-1cs.dtbo + dtbo-$(RPI_DT_OVERLAYS) += spi1-2cs.dtbo +diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README +index adb86bc..7f4bd29 100644 +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1131,7 +1131,7 @@ Params: + + + Name: spi-gpio35-39 +-Info: move SPI function block to GPIO 35 to 39 ++Info: Move SPI function block to GPIO 35 to 39 + Load: dtoverlay=spi-gpio35-39 + Params: + +@@ -1142,6 +1142,13 @@ Load: dtoverlay=spi-rtc,= + Params: pcf2123 Select the PCF2123 device + + ++Name: spi0-cs ++Info: Allows the (software) CS pins for SPI0 to be changed ++Load: dtoverlay=spi0-cs,= ++Params: cs0_pin GPIO pin for CS0 (default 8) ++ cs1_pin GPIO pin for CS1 (default 7) ++ ++ + Name: spi0-hw-cs + Info: Re-enables hardware CS/CE (chip selects) for SPI0 + Load: dtoverlay=spi0-hw-cs +diff --git a/arch/arm/boot/dts/overlays/spi0-cs-overlay.dts b/arch/arm/boot/dts/overlays/spi0-cs-overlay.dts +new file mode 100644 +index 0000000..7f79029 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi0-cs-overlay.dts +@@ -0,0 +1,29 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0_cs_pins>; ++ frag0: __overlay__ { ++ brcm,pins = <8 7>; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi0>; ++ frag1: __overlay__ { ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&frag0>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs1_pin = <&frag0>,"brcm,pins:4", ++ <&frag1>,"cs-gpios:16"; ++ }; ++}; +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0571-Revert-bcm2835-i2s-Changes-for-allowing-asymmetric-s.patch b/target/linux/brcm2708/patches-4.4/0571-Revert-bcm2835-i2s-Changes-for-allowing-asymmetric-s.patch new file mode 100644 index 00000000000..3904abbaa34 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0571-Revert-bcm2835-i2s-Changes-for-allowing-asymmetric-s.patch @@ -0,0 +1,101 @@ +From ba1f22a0d2179a0201e764c341d9dbf8f1c27ffe Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 16 Jan 2017 20:58:18 +0000 +Subject: [PATCH] Revert "bcm2835-i2s: Changes for allowing asymmetric sample + formats. (#1783)" + +This reverts commit 4897c5c2f7adb4f77d638121e9959174dff87b9c. + +Signed-off-by: Phil Elwell + +See: https://github.com/raspberrypi/linux/issues/1799 +--- + sound/soc/bcm/bcm2835-i2s.c | 54 ++++++++++++++------------------------------- + 1 file changed, 16 insertions(+), 38 deletions(-) + +diff --git a/sound/soc/bcm/bcm2835-i2s.c b/sound/soc/bcm/bcm2835-i2s.c +index d2b0801..aedb01f 100644 +--- a/sound/soc/bcm/bcm2835-i2s.c ++++ b/sound/soc/bcm/bcm2835-i2s.c +@@ -310,7 +310,6 @@ static int bcm2835_i2s_hw_params(struct snd_pcm_substream *substream, + unsigned int sampling_rate = params_rate(params); + unsigned int data_length, data_delay, bclk_ratio; + unsigned int ch1pos, ch2pos, mode, format; +- unsigned int previous_ftxp, previous_frxp; + unsigned int mash = BCM2835_CLK_MASH_1; + unsigned int divi, divf, target_frequency; + int clk_src = -1; +@@ -321,7 +320,6 @@ static int bcm2835_i2s_hw_params(struct snd_pcm_substream *substream, + bool frame_master = (master == SND_SOC_DAIFMT_CBS_CFS + || master == SND_SOC_DAIFMT_CBM_CFS); + uint32_t csreg; +- bool packed; + + /* + * If a stream is already enabled, +@@ -467,46 +465,26 @@ static int bcm2835_i2s_hw_params(struct snd_pcm_substream *substream, + return -EINVAL; + } + +- /* Set the format for the matching stream direction. */ +- switch (substream->stream) { +- case SNDRV_PCM_STREAM_PLAYBACK: +- regmap_write(dev->i2s_regmap, BCM2835_I2S_TXC_A_REG, format); +- break; +- case SNDRV_PCM_STREAM_CAPTURE: +- regmap_write(dev->i2s_regmap, BCM2835_I2S_RXC_A_REG, format); +- break; +- default: +- return -EINVAL; +- } ++ /* ++ * Set format for both streams. ++ * We cannot set another frame length ++ * (and therefore word length) anyway, ++ * so the format will be the same. ++ */ ++ regmap_write(dev->i2s_regmap, BCM2835_I2S_RXC_A_REG, format); ++ regmap_write(dev->i2s_regmap, BCM2835_I2S_TXC_A_REG, format); + + /* Setup the I2S mode */ +- /* Keep existing FTXP and FRXP values. */ +- regmap_read(dev->i2s_regmap, BCM2835_I2S_MODE_A_REG, &mode); +- +- previous_ftxp = mode & BCM2835_I2S_FTXP; +- previous_frxp = mode & BCM2835_I2S_FRXP; +- + mode = 0; + +- /* +- * Retain the frame packed mode (2 channels per 32 bit word) +- * of the other direction stream intact. The formats of each +- * direction can be different as long as the frame length is +- * shared for both. +- */ +- packed = data_length <= 16; +- +- switch (substream->stream) { +- case SNDRV_PCM_STREAM_PLAYBACK: +- mode |= previous_frxp; +- mode |= packed ? BCM2835_I2S_FTXP : 0; +- break; +- case SNDRV_PCM_STREAM_CAPTURE: +- mode |= previous_ftxp; +- mode |= packed ? BCM2835_I2S_FRXP : 0; +- break; +- default: +- return -EINVAL; ++ if (data_length <= 16) { ++ /* ++ * Use frame packed mode (2 channels per 32 bit word) ++ * We cannot set another frame length in the second stream ++ * (and therefore word length) anyway, ++ * so the format will be the same. ++ */ ++ mode |= BCM2835_I2S_FTXP | BCM2835_I2S_FRXP; + } + + mode |= BCM2835_I2S_FLEN(bclk_ratio - 1); +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0572-BCM270X_DT-Enable-UART0-on-CM3.patch b/target/linux/brcm2708/patches-4.4/0572-BCM270X_DT-Enable-UART0-on-CM3.patch new file mode 100644 index 00000000000..a28b2989417 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0572-BCM270X_DT-Enable-UART0-on-CM3.patch @@ -0,0 +1,28 @@ +From ab03c5487ebcb3f7a87609792d7f0888c2655657 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 17 Jan 2017 11:34:58 +0000 +Subject: [PATCH] BCM270X_DT: Enable UART0 on CM3 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 4 ++++ + 1 file changed, 4 insertions(+) + +diff --git a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts +index 98e6f92..7ceb16b 100644 +--- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts +@@ -7,6 +7,10 @@ + model = "Raspberry Pi Compute Module 3"; + }; + ++&uart0 { ++ status = "okay"; ++}; ++ + &gpio { + sdhost_pins: sdhost_pins { + brcm,pins = <48 49 50 51 52 53>; +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0573-config-Add-CONFIG_MD_M25P80-and-CONFIG_MD_SPI_NOR.patch b/target/linux/brcm2708/patches-4.4/0573-config-Add-CONFIG_MD_M25P80-and-CONFIG_MD_SPI_NOR.patch new file mode 100644 index 00000000000..8075f6cdafd --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0573-config-Add-CONFIG_MD_M25P80-and-CONFIG_MD_SPI_NOR.patch @@ -0,0 +1,44 @@ +From 3a1a399aeeea62610498b5a54d6e28a9c8e4df3f Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 17 Jan 2017 14:39:39 +0000 +Subject: [PATCH] config: Add CONFIG_MD_M25P80 and CONFIG_MD_SPI_NOR + +See: https://github.com/raspberrypi/linux/issues/1781 + +Signed-off-by: Phil Elwell +--- + arch/arm/configs/bcm2709_defconfig | 2 ++ + arch/arm/configs/bcmrpi_defconfig | 2 ++ + 2 files changed, 4 insertions(+) + +diff --git a/arch/arm/configs/bcm2709_defconfig b/arch/arm/configs/bcm2709_defconfig +index 0d07eed..1085058 100644 +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -407,7 +407,9 @@ CONFIG_DMA_CMA=y + CONFIG_CMA_SIZE_MBYTES=5 + CONFIG_MTD=m + CONFIG_MTD_BLOCK=m ++CONFIG_MTD_M25P80=m + CONFIG_MTD_NAND=m ++CONFIG_MTD_SPI_NOR=m + CONFIG_MTD_UBI=m + CONFIG_OF_CONFIGFS=y + CONFIG_ZRAM=m +diff --git a/arch/arm/configs/bcmrpi_defconfig b/arch/arm/configs/bcmrpi_defconfig +index 51640cb..ca52c36 100644 +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -400,7 +400,9 @@ CONFIG_DMA_CMA=y + CONFIG_CMA_SIZE_MBYTES=5 + CONFIG_MTD=m + CONFIG_MTD_BLOCK=m ++CONFIG_MTD_M25P80=m + CONFIG_MTD_NAND=m ++CONFIG_MTD_SPI_NOR=m + CONFIG_MTD_UBI=m + CONFIG_OF_CONFIGFS=y + CONFIG_ZRAM=m +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0574-config-More-USB-config-options-for-bcm2709_defconfig.patch b/target/linux/brcm2708/patches-4.4/0574-config-More-USB-config-options-for-bcm2709_defconfig.patch new file mode 100644 index 00000000000..f9f3d48c39d --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0574-config-More-USB-config-options-for-bcm2709_defconfig.patch @@ -0,0 +1,53 @@ +From f0f29d36c24d4dfa0a7197b83b2fb9ccec147421 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 19 Jan 2017 16:44:43 +0000 +Subject: [PATCH] config: More USB config options for bcm2709_defconfig (#1805) + +Bring bcm2709_defconfig up to the level of bcmrpi_defconfig with +respect to USB support. This is prompted by the introduction of CM3, +which makes gadget mode on 2709/2710 a useful option. + +Note that the DWC2 driver is not loaded by default and must be enabled +using a DT overlay or custom .dtb. + +Signed-off-by: Phil Elwell +--- + arch/arm/configs/bcm2709_defconfig | 15 +++++++++++++++ + 1 file changed, 15 insertions(+) + +diff --git a/arch/arm/configs/bcm2709_defconfig b/arch/arm/configs/bcm2709_defconfig +index 1085058..19daca4 100644 +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -969,6 +969,7 @@ CONFIG_USB_MICROTEK=m + CONFIG_USBIP_CORE=m + CONFIG_USBIP_VHCI_HCD=m + CONFIG_USBIP_HOST=m ++CONFIG_USB_DWC2=m + CONFIG_USB_SERIAL=m + CONFIG_USB_SERIAL_GENERIC=y + CONFIG_USB_SERIAL_AIRCABLE=m +@@ -1042,6 +1043,20 @@ CONFIG_USB_SPEEDTOUCH=m + CONFIG_USB_CXACRU=m + CONFIG_USB_UEAGLEATM=m + CONFIG_USB_XUSBATM=m ++CONFIG_USB_GADGET=m ++CONFIG_USB_ZERO=m ++CONFIG_USB_AUDIO=m ++CONFIG_USB_ETH=m ++CONFIG_USB_GADGETFS=m ++CONFIG_USB_MASS_STORAGE=m ++CONFIG_USB_G_SERIAL=m ++CONFIG_USB_MIDI_GADGET=m ++CONFIG_USB_G_PRINTER=m ++CONFIG_USB_CDC_COMPOSITE=m ++CONFIG_USB_G_ACM_MS=m ++CONFIG_USB_G_MULTI=m ++CONFIG_USB_G_HID=m ++CONFIG_USB_G_WEBCAM=m + CONFIG_MMC=y + CONFIG_MMC_BLOCK_MINORS=32 + CONFIG_MMC_BCM2835=y +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0575-BCM270X_DT-Add-reference-to-audio_pins-to-CM-dtb.patch b/target/linux/brcm2708/patches-4.4/0575-BCM270X_DT-Add-reference-to-audio_pins-to-CM-dtb.patch new file mode 100644 index 00000000000..b1d8295620a --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0575-BCM270X_DT-Add-reference-to-audio_pins-to-CM-dtb.patch @@ -0,0 +1,33 @@ +From 82f7e67564d89bba063b6b2e1cafee871aa22aaf Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 23 Jan 2017 17:36:50 +0000 +Subject: [PATCH] BCM270X_DT: Add reference to audio_pins to CM dtb + +The CM1 dtb contains an empty audio_pins node, but no reference to it. +Adding the usual pinctrl reference from the audio node enables the +audremap overlay (and others) to easily turn on audio. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2708-rpi-cm.dtsi | 5 +++++ + 1 file changed, 5 insertions(+) + +diff --git a/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi b/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi +index 0a3a962..ba0f316 100644 +--- a/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi ++++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi +@@ -36,6 +36,11 @@ + status = "okay"; + }; + ++&audio { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ + / { + __overrides__ { + core_freq = <&clk_core>,"clock-frequency:0"; +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0576-Add-overlay-for-mcp3008-adc-1818.patch b/target/linux/brcm2708/patches-4.4/0576-Add-overlay-for-mcp3008-adc-1818.patch new file mode 100644 index 00000000000..ba30583a00c --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0576-Add-overlay-for-mcp3008-adc-1818.patch @@ -0,0 +1,291 @@ +From f6a9afad8ed6521991c138caf7f20fd5222c2a5a Mon Sep 17 00:00:00 2001 +From: Scott Ellis +Date: Fri, 27 Jan 2017 06:42:42 -0500 +Subject: [PATCH] Add overlay for mcp3008 adc (#1818) + +Some example usage: + +SPI0.0 +dtparam=spi=on +dtoverlay=mcp3008:spi0-0-present + +SPI0.1 +dtparam=spi=on +dtoverlay=mcp3008:spi0-1-present + +SPI0.0 and SPI0.1 +dtparam=spi=on +dtoverlay=mcp3008:spi0-0-present,spi0-1-present + +SPI1.0 +dtparam=spi=on +dtoverlay=spi1-1cs +dtoverlay=mcp3008:spi1-0-present + +SPI1.2 +dtparam=spi=on +dtoverlay=spi1-1cs:cs0_pin=16 +dtoverlay=mcp3008:spi1-0-present + +SPI1.0 and SPI1.1 +dtoverlay=spi1-2cs +dtoverlay=mcp3008:spi1-0-present,spi1-1-present + +Changing the speed + +SPI0.0 +dtparam=spi=on +dtoverlay=mcp3008:spi0-0-present,spi0-0-speed=2000000 +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 9 ++ + arch/arm/boot/dts/overlays/mcp3008-overlay.dts | 205 +++++++++++++++++++++++++ + 3 files changed, 215 insertions(+) + create mode 100755 arch/arm/boot/dts/overlays/mcp3008-overlay.dts + +diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile +index 72f2d90a..b13e340 100644 +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -57,6 +57,7 @@ dtbo-$(RPI_DT_OVERLAYS) += mcp23017.dtbo + dtbo-$(RPI_DT_OVERLAYS) += mcp23s17.dtbo + dtbo-$(RPI_DT_OVERLAYS) += mcp2515-can0.dtbo + dtbo-$(RPI_DT_OVERLAYS) += mcp2515-can1.dtbo ++dtbo-$(RPI_DT_OVERLAYS) += mcp3008.dtbo + dtbo-$(RPI_DT_OVERLAYS) += mmc.dtbo + dtbo-$(RPI_DT_OVERLAYS) += mz61581.dtbo + dtbo-$(RPI_DT_OVERLAYS) += pi3-act-led.dtbo +diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README +index 7f4bd29..72601f8 100644 +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -736,6 +736,15 @@ Params: oscillator Clock frequency for the CAN controller (Hz) + interrupt GPIO for interrupt signal + + ++Name: mcp3008 ++Info: Configures MCP3008 A/D converters ++ For devices on spi1 or spi2, the interfaces should be enabled ++ with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. ++Load: dtoverlay=mcp3008,[=] ++Params: spi--present boolean, configure device at spi, cs ++ spi--speed integer, set the spi bus speed for this device ++ ++ + Name: mmc + Info: Selects the bcm2835-mmc SD/MMC driver, optionally with overclock + Load: dtoverlay=mmc,= +diff --git a/arch/arm/boot/dts/overlays/mcp3008-overlay.dts b/arch/arm/boot/dts/overlays/mcp3008-overlay.dts +new file mode 100755 +index 0000000..06bf426 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/mcp3008-overlay.dts +@@ -0,0 +1,205 @@ ++/* ++ * Device tree overlay for Microchip mcp3008 10-Bit A/D Converters ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spidev0>; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev1>; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target-path = "spi1/spidev@0"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target-path = "spi1/spidev@1"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@4 { ++ target-path = "spi1/spidev@2"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@5 { ++ target-path = "spi2/spidev@0"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@6 { ++ target-path = "spi2/spidev@1"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@7 { ++ target-path = "spi2/spidev@2"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@8 { ++ target = <&spi0>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_00: mcp3008@0 { ++ compatible = "mcp3008"; ++ reg = <0>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ fragment@9 { ++ target = <&spi0>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_01: mcp3008@1 { ++ compatible = "mcp3008"; ++ reg = <1>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ fragment@10 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_10: mcp3008@0 { ++ compatible = "mcp3008"; ++ reg = <0>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ fragment@11 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_11: mcp3008@1 { ++ compatible = "mcp3008"; ++ reg = <1>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ fragment@12 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_12: mcp3008@2 { ++ compatible = "mcp3008"; ++ reg = <2>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ fragment@13 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_20: mcp3008@0 { ++ compatible = "mcp3008"; ++ reg = <0>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ fragment@14 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_21: mcp3008@1 { ++ compatible = "mcp3008"; ++ reg = <1>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ fragment@15 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_22: mcp3008@2 { ++ compatible = "mcp3008"; ++ reg = <2>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ spi0-0-present = <0>, "+0+8"; ++ spi0-1-present = <0>, "+1+9"; ++ spi1-0-present = <0>, "+2+10"; ++ spi1-1-present = <0>, "+3+11"; ++ spi1-2-present = <0>, "+4+12"; ++ spi2-0-present = <0>, "+5+13"; ++ spi2-1-present = <0>, "+6+14"; ++ spi2-2-present = <0>, "+7+15"; ++ spi0-0-speed = <&mcp3008_00>, "spi-max-frequency:0"; ++ spi0-1-speed = <&mcp3008_01>, "spi-max-frequency:0"; ++ spi1-0-speed = <&mcp3008_10>, "spi-max-frequency:0"; ++ spi1-1-speed = <&mcp3008_11>, "spi-max-frequency:0"; ++ spi1-2-speed = <&mcp3008_12>, "spi-max-frequency:0"; ++ spi2-0-speed = <&mcp3008_20>, "spi-max-frequency:0"; ++ spi2-1-speed = <&mcp3008_21>, "spi-max-frequency:0"; ++ spi2-2-speed = <&mcp3008_22>, "spi-max-frequency:0"; ++ }; ++}; +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0577-x86-ioapic-Restore-IO-APIC-irq_chip-retrigger-callba.patch b/target/linux/brcm2708/patches-4.4/0577-x86-ioapic-Restore-IO-APIC-irq_chip-retrigger-callba.patch new file mode 100644 index 00000000000..cacfc5d2b45 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0577-x86-ioapic-Restore-IO-APIC-irq_chip-retrigger-callba.patch @@ -0,0 +1,51 @@ +From 1dab2d7f80fa955ff493785033008b2c17f7cc53 Mon Sep 17 00:00:00 2001 +From: Ruslan Ruslichenko +Date: Tue, 17 Jan 2017 16:13:52 +0200 +Subject: [PATCH] x86/ioapic: Restore IO-APIC irq_chip retrigger callback + +commit 020eb3daaba2857b32c4cf4c82f503d6a00a67de upstream. + +commit d32932d02e18 removed the irq_retrigger callback from the IO-APIC +chip and did not add it to the new IO-APIC-IR irq chip. + +Unfortunately the software resend fallback is not enabled on X86, so edge +interrupts which are received during the lazy disabled state of the +interrupt line are not retriggered and therefor lost. + +Restore the callbacks. + +[ tglx: Massaged changelog ] + +Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") +Signed-off-by: Ruslan Ruslichenko +Cc: xe-linux-external@cisco.com +Link: http://lkml.kernel.org/r/1484662432-13580-1-git-send-email-rruslich@cisco.com +Signed-off-by: Thomas Gleixner +Signed-off-by: Greg Kroah-Hartman +--- + arch/x86/kernel/apic/io_apic.c | 2 ++ + 1 file changed, 2 insertions(+) + +diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c +index 8ca533b..1e5d2f0 100644 +--- a/arch/x86/kernel/apic/io_apic.c ++++ b/arch/x86/kernel/apic/io_apic.c +@@ -1875,6 +1875,7 @@ static struct irq_chip ioapic_chip __read_mostly = { + .irq_ack = irq_chip_ack_parent, + .irq_eoi = ioapic_ack_level, + .irq_set_affinity = ioapic_set_affinity, ++ .irq_retrigger = irq_chip_retrigger_hierarchy, + .flags = IRQCHIP_SKIP_SET_WAKE, + }; + +@@ -1886,6 +1887,7 @@ static struct irq_chip ioapic_ir_chip __read_mostly = { + .irq_ack = irq_chip_ack_parent, + .irq_eoi = ioapic_ir_ack_level, + .irq_set_affinity = ioapic_set_affinity, ++ .irq_retrigger = irq_chip_retrigger_hierarchy, + .flags = IRQCHIP_SKIP_SET_WAKE, + }; + +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0578-config-add-slcan-kernel-module.patch b/target/linux/brcm2708/patches-4.4/0578-config-add-slcan-kernel-module.patch new file mode 100644 index 00000000000..4330cb46abd --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0578-config-add-slcan-kernel-module.patch @@ -0,0 +1,38 @@ +From 7342071952322e209c40dd3474c020c673814ada Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Fri, 27 Jan 2017 18:49:30 +0000 +Subject: [PATCH] config: add slcan kernel module + +See: https://github.com/raspberrypi/linux/issues/1819 +--- + arch/arm/configs/bcm2709_defconfig | 1 + + arch/arm/configs/bcmrpi_defconfig | 1 + + 2 files changed, 2 insertions(+) + +diff --git a/arch/arm/configs/bcm2709_defconfig b/arch/arm/configs/bcm2709_defconfig +index 19daca4..783d2c2 100644 +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -358,6 +358,7 @@ CONFIG_BAYCOM_SER_HDX=m + CONFIG_YAM=m + CONFIG_CAN=m + CONFIG_CAN_VCAN=m ++CONFIG_CAN_SLCAN=m + CONFIG_CAN_MCP251X=m + CONFIG_IRDA=m + CONFIG_IRLAN=m +diff --git a/arch/arm/configs/bcmrpi_defconfig b/arch/arm/configs/bcmrpi_defconfig +index ca52c36..be7bf41 100644 +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -351,6 +351,7 @@ CONFIG_BAYCOM_SER_HDX=m + CONFIG_YAM=m + CONFIG_CAN=m + CONFIG_CAN_VCAN=m ++CONFIG_CAN_SLCAN=m + CONFIG_CAN_MCP251X=m + CONFIG_IRDA=m + CONFIG_IRLAN=m +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0579-drm-vc4-Fix-sending-of-page-flip-completion-events-i.patch b/target/linux/brcm2708/patches-4.4/0579-drm-vc4-Fix-sending-of-page-flip-completion-events-i.patch new file mode 100644 index 00000000000..c798546ca09 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0579-drm-vc4-Fix-sending-of-page-flip-completion-events-i.patch @@ -0,0 +1,47 @@ +From 5aecf0a83cc2271427aad4f1a313a3c01e581c03 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 2 Feb 2017 09:42:18 -0800 +Subject: [PATCH] drm/vc4: Fix sending of page flip completion events in FKMS + mode. + +In the rewrite of vc4_crtc.c for fkms, I dropped the part of the +CRTC's atomic flush handler that moved the completion event from the +proposed atomic state change to the CRTC's current state. That meant +that when full screen pageflipping happened (glxgears -fullscreen in +X, compton, por weston), the app would end up blocked firever waiting +to draw its next frame. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 15 +++++++++++++++ + 1 file changed, 15 insertions(+) + +diff --git a/drivers/gpu/drm/vc4/vc4_firmware_kms.c b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +index a1b6511..8f74382 100644 +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -312,6 +312,21 @@ static int vc4_crtc_atomic_check(struct drm_crtc *crtc, + static void vc4_crtc_atomic_flush(struct drm_crtc *crtc, + struct drm_crtc_state *old_state) + { ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ struct drm_device *dev = crtc->dev; ++ ++ if (crtc->state->event) { ++ unsigned long flags; ++ ++ crtc->state->event->pipe = drm_crtc_index(crtc); ++ ++ WARN_ON(drm_crtc_vblank_get(crtc) != 0); ++ ++ spin_lock_irqsave(&dev->event_lock, flags); ++ vc4_crtc->event = crtc->state->event; ++ crtc->state->event = NULL; ++ spin_unlock_irqrestore(&dev->event_lock, flags); ++ } + } + + static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc) +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0580-clk-bcm2835-Fix-fixed_divider-of-pllh_aux.patch b/target/linux/brcm2708/patches-4.4/0580-clk-bcm2835-Fix-fixed_divider-of-pllh_aux.patch new file mode 100644 index 00000000000..c7946e5600d --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0580-clk-bcm2835-Fix-fixed_divider-of-pllh_aux.patch @@ -0,0 +1,32 @@ +From 514dc56068291b52b6f8bb2fe29d8755d6126283 Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Tue, 22 Nov 2016 12:45:28 -0800 +Subject: [PATCH] clk: bcm2835: Fix ->fixed_divider of pllh_aux + +There is no fixed divider on pllh_aux. + +Signed-off-by: Boris Brezillon +Signed-off-by: Eric Anholt +Reviewed-by: Eric Anholt +Signed-off-by: Stephen Boyd +(cherry picked from commit f2a46926aba1f0c33944901d2420a6a887455ddc) +--- + drivers/clk/bcm/clk-bcm2835.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c +index e9e8c25..3fbd2e8 100644 +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -1657,7 +1657,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLH_AUX, + .load_mask = CM_PLLH_LOADAUX, + .hold_mask = 0, +- .fixed_divider = 10), ++ .fixed_divider = 1), + [BCM2835_PLLH_PIX] = REGISTER_PLL_DIV( + .name = "pllh_pix", + .source_pll = "pllh", +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0581-clk-bcm-Support-rate-change-propagation-on-bcm2835-c.patch b/target/linux/brcm2708/patches-4.4/0581-clk-bcm-Support-rate-change-propagation-on-bcm2835-c.patch new file mode 100644 index 00000000000..bd7405e8c62 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0581-clk-bcm-Support-rate-change-propagation-on-bcm2835-c.patch @@ -0,0 +1,129 @@ +From e75f021850a698fec611538e8ff293c22a4604f5 Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Thu, 1 Dec 2016 22:00:19 +0100 +Subject: [PATCH] clk: bcm: Support rate change propagation on bcm2835 clocks + +Some peripheral clocks, like the VEC (Video EnCoder) clock need to be set +to a precise rate (in our case 108MHz). With the current implementation, +where peripheral clocks are not allowed to forward rate change requests +to their parents, it is impossible to match this requirement unless the +bootloader has configured things correctly, or a specific rate has been +assigned through the DT (with the assigned-clk-rates property). + +Add a new field to struct bcm2835_clock_data to specify which parent +clocks accept rate change propagation, and support set rate propagation +in bcm2835_clock_determine_rate(). + +Signed-off-by: Boris Brezillon +Reviewed-by: Eric Anholt +Signed-off-by: Stephen Boyd +(cherry picked from commit 155e8b3b0ee320ae866b97dd31eba8a1f080a772) +--- + drivers/clk/bcm/clk-bcm2835.c | 67 ++++++++++++++++++++++++++++++++++++++++--- + 1 file changed, 63 insertions(+), 4 deletions(-) + +diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c +index 3fbd2e8..5f0e2f3 100644 +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -457,6 +457,9 @@ struct bcm2835_clock_data { + const char *const *parents; + int num_mux_parents; + ++ /* Bitmap encoding which parents accept rate change propagation. */ ++ unsigned int set_rate_parent; ++ + u32 ctl_reg; + u32 div_reg; + +@@ -1055,10 +1058,60 @@ bcm2835_clk_is_pllc(struct clk_hw *hw) + return strncmp(clk_hw_get_name(hw), "pllc", 4) == 0; + } + ++static unsigned long bcm2835_clock_choose_div_and_prate(struct clk_hw *hw, ++ int parent_idx, ++ unsigned long rate, ++ u32 *div, ++ unsigned long *prate) ++{ ++ struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); ++ struct bcm2835_cprman *cprman = clock->cprman; ++ const struct bcm2835_clock_data *data = clock->data; ++ unsigned long best_rate; ++ u32 curdiv, mindiv, maxdiv; ++ struct clk_hw *parent; ++ ++ parent = clk_hw_get_parent_by_index(hw, parent_idx); ++ ++ if (!(BIT(parent_idx) & data->set_rate_parent)) { ++ *prate = clk_hw_get_rate(parent); ++ *div = bcm2835_clock_choose_div(hw, rate, *prate, true); ++ ++ return bcm2835_clock_rate_from_divisor(clock, *prate, ++ *div); ++ } ++ ++ if (data->frac_bits) ++ dev_warn(cprman->dev, ++ "frac bits are not used when propagating rate change"); ++ ++ /* clamp to min divider of 2 if we're dealing with a mash clock */ ++ mindiv = data->is_mash_clock ? 2 : 1; ++ maxdiv = BIT(data->int_bits) - 1; ++ ++ /* TODO: Be smart, and only test a subset of the available divisors. */ ++ for (curdiv = mindiv; curdiv <= maxdiv; curdiv++) { ++ unsigned long tmp_rate; ++ ++ tmp_rate = clk_hw_round_rate(parent, rate * curdiv); ++ tmp_rate /= curdiv; ++ if (curdiv == mindiv || ++ (tmp_rate > best_rate && tmp_rate <= rate)) ++ best_rate = tmp_rate; ++ ++ if (best_rate == rate) ++ break; ++ } ++ ++ *div = curdiv << CM_DIV_FRAC_BITS; ++ *prate = curdiv * best_rate; ++ ++ return best_rate; ++} ++ + static int bcm2835_clock_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) + { +- struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); + struct clk_hw *parent, *best_parent = NULL; + bool current_parent_is_pllc; + unsigned long rate, best_rate = 0; +@@ -1086,9 +1139,8 @@ static int bcm2835_clock_determine_rate(struct clk_hw *hw, + if (bcm2835_clk_is_pllc(parent) && !current_parent_is_pllc) + continue; + +- prate = clk_hw_get_rate(parent); +- div = bcm2835_clock_choose_div(hw, req->rate, prate, true); +- rate = bcm2835_clock_rate_from_divisor(clock, prate, div); ++ rate = bcm2835_clock_choose_div_and_prate(hw, i, req->rate, ++ &div, &prate); + if (rate > best_rate && rate <= req->rate) { + best_parent = parent; + best_prate = prate; +@@ -1308,6 +1360,13 @@ static struct clk *bcm2835_register_clock(struct bcm2835_cprman *cprman, + if ((cprman_read(cprman, data->ctl_reg) & CM_ENABLE) == 0) + init.flags &= ~CLK_IS_CRITICAL; + ++ /* ++ * Pass the CLK_SET_RATE_PARENT flag if we are allowed to propagate ++ * rate changes on at least of the parents. ++ */ ++ if (data->set_rate_parent) ++ init.flags |= CLK_SET_RATE_PARENT; ++ + if (data->is_vpu_clock) { + init.ops = &bcm2835_vpu_clock_clk_ops; + } else { +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0582-clk-bcm-Allow-rate-change-propagation-to-PLLH_AUX-on.patch b/target/linux/brcm2708/patches-4.4/0582-clk-bcm-Allow-rate-change-propagation-to-PLLH_AUX-on.patch new file mode 100644 index 00000000000..a66653e17be --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0582-clk-bcm-Allow-rate-change-propagation-to-PLLH_AUX-on.patch @@ -0,0 +1,40 @@ +From 5c301af484ece3e61146572167bbe9418d536616 Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Thu, 1 Dec 2016 22:00:20 +0100 +Subject: [PATCH] clk: bcm: Allow rate change propagation to PLLH_AUX on VEC + clock + +The VEC clock requires needs to be set at exactly 108MHz. Allow rate +change propagation on PLLH_AUX to match this requirement wihtout +impacting other IPs (PLLH is currently only used by the HDMI encoder, +which cannot be enabled when the VEC encoder is enabled). + +Signed-off-by: Boris Brezillon +Reviewed-by: Eric Anholt +Signed-off-by: Stephen Boyd +(cherry picked from commit d86d46af84855403c00018be1c3e7bc190f2a6cd) +--- + drivers/clk/bcm/clk-bcm2835.c | 7 ++++++- + 1 file changed, 6 insertions(+), 1 deletion(-) + +diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c +index 5f0e2f3..d023e4a 100644 +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -1920,7 +1920,12 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .ctl_reg = CM_VECCTL, + .div_reg = CM_VECDIV, + .int_bits = 4, +- .frac_bits = 0), ++ .frac_bits = 0, ++ /* ++ * Allow rate change propagation only on PLLH_AUX which is ++ * assigned index 7 in the parent array. ++ */ ++ .set_rate_parent = BIT(7)), + + /* dsi clocks */ + [BCM2835_CLOCK_DSI0E] = REGISTER_PER_CLK( +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0583-clk-bcm-Fix-maybe-uninitialized-warning-in-bcm2835_c.patch b/target/linux/brcm2708/patches-4.4/0583-clk-bcm-Fix-maybe-uninitialized-warning-in-bcm2835_c.patch new file mode 100644 index 00000000000..5a004a68397 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0583-clk-bcm-Fix-maybe-uninitialized-warning-in-bcm2835_c.patch @@ -0,0 +1,34 @@ +From d4be0d5751c1bfe067a07a4ec95d7575ec03ab83 Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Mon, 12 Dec 2016 09:00:53 +0100 +Subject: [PATCH] clk: bcm: Fix 'maybe-uninitialized' warning in + bcm2835_clock_choose_div_and_prate() + +best_rate is reported as potentially uninitialized by gcc. + +Signed-off-by: Boris Brezillon +Fixes: 155e8b3b0ee3 ("clk: bcm: Support rate change propagation on bcm2835 clocks") +Reported-by: Stephen Rothwell +Reviewed-by: Eric Anholt +Signed-off-by: Stephen Boyd +(cherry picked from commit 2aab7a2055a1705c9e30920d95a596226999eb21) +--- + drivers/clk/bcm/clk-bcm2835.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c +index d023e4a..89dad97 100644 +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -1067,7 +1067,7 @@ static unsigned long bcm2835_clock_choose_div_and_prate(struct clk_hw *hw, + struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); + struct bcm2835_cprman *cprman = clock->cprman; + const struct bcm2835_clock_data *data = clock->data; +- unsigned long best_rate; ++ unsigned long best_rate = 0; + u32 curdiv, mindiv, maxdiv; + struct clk_hw *parent; + +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0584-clk-bcm2835-Don-t-rate-change-PLLs-on-behalf-of-DSI-.patch b/target/linux/brcm2708/patches-4.4/0584-clk-bcm2835-Don-t-rate-change-PLLs-on-behalf-of-DSI-.patch new file mode 100644 index 00000000000..94f4be61a1c --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0584-clk-bcm2835-Don-t-rate-change-PLLs-on-behalf-of-DSI-.patch @@ -0,0 +1,177 @@ +From c08886564938df6796a7d98495cf5cc3f7a09337 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 18 Jan 2017 07:31:55 +1100 +Subject: [PATCH] clk: bcm2835: Don't rate change PLLs on behalf of DSI PLL + dividers (v2). + +Our core PLLs are intended to be configured once and left alone. With +the SET_RATE_PARENT, asking to set the PLLD_DSI1 clock rate would +change PLLD just to get closer to the requested DSI clock, thus +changing PLLD_PER, the UART and ethernet PHY clock rates downstream of +it, and breaking ethernet. + +We *do* want PLLH to change so that PLLH_AUX can be exactly the value +we want, though. Thus, we need to have a per-divider policy of +whether to pass rate changes up. + +Signed-off-by: Eric Anholt +Signed-off-by: Stephen Boyd +(cherry picked from commit 55486091bd1e1c5ed28c43c0d6b3392468a9adb5) +--- + drivers/clk/bcm/clk-bcm2835.c | 42 ++++++++++++++++++++++++++++-------------- + 1 file changed, 28 insertions(+), 14 deletions(-) + +diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c +index 89dad97..54cb4e1 100644 +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -449,6 +449,7 @@ struct bcm2835_pll_divider_data { + u32 load_mask; + u32 hold_mask; + u32 fixed_divider; ++ u32 flags; + }; + + struct bcm2835_clock_data { +@@ -1286,7 +1287,7 @@ bcm2835_register_pll_divider(struct bcm2835_cprman *cprman, + init.num_parents = 1; + init.name = divider_name; + init.ops = &bcm2835_pll_divider_clk_ops; +- init.flags = CLK_IGNORE_UNUSED; ++ init.flags = data->flags | CLK_IGNORE_UNUSED; + + divider = devm_kzalloc(cprman->dev, sizeof(*divider), GFP_KERNEL); + if (!divider) +@@ -1525,7 +1526,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLA_CORE, + .load_mask = CM_PLLA_LOADCORE, + .hold_mask = CM_PLLA_HOLDCORE, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLA_PER] = REGISTER_PLL_DIV( + .name = "plla_per", + .source_pll = "plla", +@@ -1533,7 +1535,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLA_PER, + .load_mask = CM_PLLA_LOADPER, + .hold_mask = CM_PLLA_HOLDPER, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLA_DSI0] = REGISTER_PLL_DIV( + .name = "plla_dsi0", + .source_pll = "plla", +@@ -1549,7 +1552,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLA_CCP2, + .load_mask = CM_PLLA_LOADCCP2, + .hold_mask = CM_PLLA_HOLDCCP2, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + + /* PLLB is used for the ARM's clock. */ + [BCM2835_PLLB] = REGISTER_PLL( +@@ -1573,7 +1577,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLB_ARM, + .load_mask = CM_PLLB_LOADARM, + .hold_mask = CM_PLLB_HOLDARM, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + + /* + * PLLC is the core PLL, used to drive the core VPU clock. +@@ -1602,7 +1607,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLC_CORE0, + .load_mask = CM_PLLC_LOADCORE0, + .hold_mask = CM_PLLC_HOLDCORE0, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLC_CORE1] = REGISTER_PLL_DIV( + .name = "pllc_core1", + .source_pll = "pllc", +@@ -1610,7 +1616,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLC_CORE1, + .load_mask = CM_PLLC_LOADCORE1, + .hold_mask = CM_PLLC_HOLDCORE1, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLC_CORE2] = REGISTER_PLL_DIV( + .name = "pllc_core2", + .source_pll = "pllc", +@@ -1618,7 +1625,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLC_CORE2, + .load_mask = CM_PLLC_LOADCORE2, + .hold_mask = CM_PLLC_HOLDCORE2, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLC_PER] = REGISTER_PLL_DIV( + .name = "pllc_per", + .source_pll = "pllc", +@@ -1626,7 +1634,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLC_PER, + .load_mask = CM_PLLC_LOADPER, + .hold_mask = CM_PLLC_HOLDPER, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + + /* + * PLLD is the display PLL, used to drive DSI display panels. +@@ -1655,7 +1664,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLD_CORE, + .load_mask = CM_PLLD_LOADCORE, + .hold_mask = CM_PLLD_HOLDCORE, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLD_PER] = REGISTER_PLL_DIV( + .name = "plld_per", + .source_pll = "plld", +@@ -1663,7 +1673,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLD_PER, + .load_mask = CM_PLLD_LOADPER, + .hold_mask = CM_PLLD_HOLDPER, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLD_DSI0] = REGISTER_PLL_DIV( + .name = "plld_dsi0", + .source_pll = "plld", +@@ -1708,7 +1719,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLH_RCAL, + .load_mask = CM_PLLH_LOADRCAL, + .hold_mask = 0, +- .fixed_divider = 10), ++ .fixed_divider = 10, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLH_AUX] = REGISTER_PLL_DIV( + .name = "pllh_aux", + .source_pll = "pllh", +@@ -1716,7 +1728,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLH_AUX, + .load_mask = CM_PLLH_LOADAUX, + .hold_mask = 0, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLH_PIX] = REGISTER_PLL_DIV( + .name = "pllh_pix", + .source_pll = "pllh", +@@ -1724,7 +1737,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLH_PIX, + .load_mask = CM_PLLH_LOADPIX, + .hold_mask = 0, +- .fixed_divider = 10), ++ .fixed_divider = 10, ++ .flags = CLK_SET_RATE_PARENT), + + /* the clocks */ + +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0585-gpio_mem-Remove-unnecessary-dev_info-output-1830.patch b/target/linux/brcm2708/patches-4.4/0585-gpio_mem-Remove-unnecessary-dev_info-output-1830.patch new file mode 100644 index 00000000000..e4407332ea2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0585-gpio_mem-Remove-unnecessary-dev_info-output-1830.patch @@ -0,0 +1,27 @@ +From cc3ee0379f3b2d605234098568c8b4b7b33254ae Mon Sep 17 00:00:00 2001 +From: JamesH65 +Date: Mon, 6 Feb 2017 15:24:47 +0000 +Subject: [PATCH] gpio_mem: Remove unnecessary dev_info output (#1830) + +The open function was spamming syslog every time +called, so have removed call completely. +--- + drivers/char/broadcom/bcm2835-gpiomem.c | 2 -- + 1 file changed, 2 deletions(-) + +diff --git a/drivers/char/broadcom/bcm2835-gpiomem.c b/drivers/char/broadcom/bcm2835-gpiomem.c +index 911f5b7..f5e7f1b 100644 +--- a/drivers/char/broadcom/bcm2835-gpiomem.c ++++ b/drivers/char/broadcom/bcm2835-gpiomem.c +@@ -76,8 +76,6 @@ static int bcm2835_gpiomem_open(struct inode *inode, struct file *file) + int dev = iminor(inode); + int ret = 0; + +- dev_info(inst->dev, "gpiomem device opened."); +- + if (dev != DEVICE_MINOR) { + dev_err(inst->dev, "Unknown minor device: %d", dev); + ret = -ENXIO; +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0586-drm-vc4-Fulfill-user-BO-creation-requests-from-the-k.patch b/target/linux/brcm2708/patches-4.4/0586-drm-vc4-Fulfill-user-BO-creation-requests-from-the-k.patch new file mode 100644 index 00000000000..2dab022d12c --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0586-drm-vc4-Fulfill-user-BO-creation-requests-from-the-k.patch @@ -0,0 +1,59 @@ +From 6b7250b2393653e5d08deed591b78b41a2ee8d43 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 8 Feb 2017 15:00:54 -0800 +Subject: [PATCH] drm/vc4: Fulfill user BO creation requests from the kernel BO + cache. + +The from_cache flag was actually "the BO is invisible to userspace", +so we can repurpose to just zero out a cached BO and return it to +userspace. + +Improves wall time for a loop of 5 glsl-algebraic-add-add-1 by +-1.44989% +/- 0.862891% (n=28, 1 outlier removed from each that +appeared to be other system noise) + +Note that there's an intel-gpu-tools test to check for the proper +zeroing behavior here, which we continue to pass. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_bo.c | 13 +++++++------ + 1 file changed, 7 insertions(+), 6 deletions(-) + +diff --git a/drivers/gpu/drm/vc4/vc4_bo.c b/drivers/gpu/drm/vc4/vc4_bo.c +index 56b779c..ce8a5fd 100644 +--- a/drivers/gpu/drm/vc4/vc4_bo.c ++++ b/drivers/gpu/drm/vc4/vc4_bo.c +@@ -208,22 +208,23 @@ struct drm_gem_object *vc4_create_object(struct drm_device *dev, size_t size) + } + + struct vc4_bo *vc4_bo_create(struct drm_device *dev, size_t unaligned_size, +- bool from_cache) ++ bool allow_unzeroed) + { + size_t size = roundup(unaligned_size, PAGE_SIZE); + struct vc4_dev *vc4 = to_vc4_dev(dev); + struct drm_gem_cma_object *cma_obj; + int pass, ret; ++ struct vc4_bo *bo; + + if (size == 0) + return ERR_PTR(-EINVAL); + + /* First, try to get a vc4_bo from the kernel BO cache. */ +- if (from_cache) { +- struct vc4_bo *bo = vc4_bo_get_from_cache(dev, size); +- +- if (bo) +- return bo; ++ bo = vc4_bo_get_from_cache(dev, size); ++ if (bo) { ++ if (!allow_unzeroed) ++ memset(bo->base.vaddr, 0, bo->base.base.size); ++ return bo; + } + + /* Otherwise, make a new BO. */ +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0587-drm-vc4-Fix-OOPSes-from-trying-to-cache-a-partially-.patch b/target/linux/brcm2708/patches-4.4/0587-drm-vc4-Fix-OOPSes-from-trying-to-cache-a-partially-.patch new file mode 100644 index 00000000000..c2381cb34bf --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0587-drm-vc4-Fix-OOPSes-from-trying-to-cache-a-partially-.patch @@ -0,0 +1,39 @@ +From 73042261439a2d73e4e7b711de55a8a135725739 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 9 Feb 2017 09:23:34 -0800 +Subject: [PATCH] drm/vc4: Fix OOPSes from trying to cache a partially + constructed BO. + +If a CMA allocation failed, the partially constructed BO would be +unreferenced through the normal path, and we might choose to put it in +the BO cache. If we then reused it before it expired from the cache, +the kernel would OOPS. + +Signed-off-by: Eric Anholt +Fixes: c826a6e10644 ("drm/vc4: Add a BO cache.") +--- + drivers/gpu/drm/vc4/vc4_bo.c | 8 ++++++++ + 1 file changed, 8 insertions(+) + +diff --git a/drivers/gpu/drm/vc4/vc4_bo.c b/drivers/gpu/drm/vc4/vc4_bo.c +index ce8a5fd..d7474dd 100644 +--- a/drivers/gpu/drm/vc4/vc4_bo.c ++++ b/drivers/gpu/drm/vc4/vc4_bo.c +@@ -334,6 +334,14 @@ void vc4_free_object(struct drm_gem_object *gem_bo) + goto out; + } + ++ /* If this object was partially constructed but CMA allocation ++ * had failed, just free it. ++ */ ++ if (!bo->base.vaddr) { ++ vc4_bo_destroy(bo); ++ goto out; ++ } ++ + cache_list = vc4_get_cache_list_for_size(dev, gem_bo->size); + if (!cache_list) { + vc4_bo_destroy(bo); +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0588-drm-vc4-Verify-at-boot-that-CMA-doesn-t-cross-a-256M.patch b/target/linux/brcm2708/patches-4.4/0588-drm-vc4-Verify-at-boot-that-CMA-doesn-t-cross-a-256M.patch new file mode 100644 index 00000000000..d09e6d3ba69 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0588-drm-vc4-Verify-at-boot-that-CMA-doesn-t-cross-a-256M.patch @@ -0,0 +1,88 @@ +From bf4b7e8817115f839241e55add244cf60225e436 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 12 Oct 2015 08:58:08 -0700 +Subject: [PATCH] drm/vc4: Verify at boot that CMA doesn't cross a 256MB + boundary. + +I've seen lots of users cranking CMA up higher, so throw an error if +they do. + +Signed-off-by: Eric Anholt +--- + drivers/base/dma-contiguous.c | 1 + + drivers/gpu/drm/vc4/vc4_v3d.c | 18 ++++++++++++++++++ + mm/cma.c | 2 ++ + 3 files changed, 21 insertions(+) + +diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c +index e167a1e1..60f5c25 100644 +--- a/drivers/base/dma-contiguous.c ++++ b/drivers/base/dma-contiguous.c +@@ -35,6 +35,7 @@ + #endif + + struct cma *dma_contiguous_default_area; ++EXPORT_SYMBOL(dma_contiguous_default_area); + + /* + * Default global CMA area size can be defined in kernel's .config. +diff --git a/drivers/gpu/drm/vc4/vc4_v3d.c b/drivers/gpu/drm/vc4/vc4_v3d.c +index 7cc346a..1d9e5a6 100644 +--- a/drivers/gpu/drm/vc4/vc4_v3d.c ++++ b/drivers/gpu/drm/vc4/vc4_v3d.c +@@ -16,7 +16,10 @@ + * this program. If not, see . + */ + ++#include "linux/init.h" ++#include "linux/cma.h" + #include "linux/component.h" ++#include "linux/dma-contiguous.h" + #include "linux/pm_runtime.h" + #include "vc4_drv.h" + #include "vc4_regs.h" +@@ -185,8 +188,23 @@ static int vc4_v3d_bind(struct device *dev, struct device *master, void *data) + struct drm_device *drm = dev_get_drvdata(master); + struct vc4_dev *vc4 = to_vc4_dev(drm); + struct vc4_v3d *v3d = NULL; ++ struct cma *cma; + int ret; + ++ cma = dev_get_cma_area(dev); ++ if (!cma) ++ return -EINVAL; ++ ++ if ((cma_get_base(cma) & 0xf0000000) != ++ ((cma_get_base(cma) + cma_get_size(cma) - 1) & 0xf0000000)) { ++ DRM_ERROR("V3D requires that the CMA area (0x%08lx - 0x%08lx) " ++ "not span a 256MB boundary, or memory corruption " ++ "would happen.\n", ++ (long)cma_get_base(cma), ++ cma_get_base(cma) + cma_get_size(cma)); ++ return -EINVAL; ++ } ++ + v3d = devm_kzalloc(&pdev->dev, sizeof(*v3d), GFP_KERNEL); + if (!v3d) + return -ENOMEM; +diff --git a/mm/cma.c b/mm/cma.c +index bd0e141..efac29b 100644 +--- a/mm/cma.c ++++ b/mm/cma.c +@@ -47,11 +47,13 @@ phys_addr_t cma_get_base(const struct cma *cma) + { + return PFN_PHYS(cma->base_pfn); + } ++EXPORT_SYMBOL(cma_get_base); + + unsigned long cma_get_size(const struct cma *cma) + { + return cma->count << PAGE_SHIFT; + } ++EXPORT_SYMBOL(cma_get_size); + + static unsigned long cma_bitmap_aligned_mask(const struct cma *cma, + int align_order) +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0589-Update-vfpmodule.c.patch b/target/linux/brcm2708/patches-4.4/0589-Update-vfpmodule.c.patch new file mode 100644 index 00000000000..8bdfe2e9d7e --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0589-Update-vfpmodule.c.patch @@ -0,0 +1,143 @@ +From 124370babf0428ec8db2d0ba314105cd9e6ea2c7 Mon Sep 17 00:00:00 2001 +From: Claggy3 +Date: Sat, 11 Feb 2017 14:00:30 +0000 +Subject: [PATCH] Update vfpmodule.c + +Christopher Alexander Tobias Schulze - May 2, 2015, 11:57 a.m. +This patch fixes a problem with VFP state save and restore related +to exception handling (panic with message "BUG: unsupported FP +instruction in kernel mode") present on VFP11 floating point units +(as used with ARM1176JZF-S CPUs, e.g. on first generation Raspberry +Pi boards). This patch was developed and discussed on + + https://github.com/raspberrypi/linux/issues/859 + +A precondition to see the crashes is that floating point exception +traps are enabled. In this case, the VFP11 might determine that a FPU +operation needs to trap at a point in time when it is not possible to +signal this to the ARM11 core any more. The VFP11 will then set the +FPEXC.EX bit and store the trapped opcode in FPINST. (In some cases, +a second opcode might have been accepted by the VFP11 before the +exception was detected and could be reported to the ARM11 - in this +case, the VFP11 also sets FPEXC.FP2V and stores the second opcode in +FPINST2.) + +If FPEXC.EX is set, the VFP11 will "bounce" the next FPU opcode issued +by the ARM11 CPU, which will be seen by the ARM11 as an undefined opcode +trap. The VFP support code examines the FPEXC.EX and FPEXC.FP2V bits +to decide what actions to take, i.e., whether to emulate the opcodes +found in FPINST and FPINST2, and whether to retry the bounced instruction. + +If a user space application has left the VFP11 in this "pending trap" +state, the next FPU opcode issued to the VFP11 might actually be the +VSTMIA operation vfp_save_state() uses to store the FPU registers +to memory (in our test cases, when building the signal stack frame). +In this case, the kernel crashes as described above. + +This patch fixes the problem by making sure that vfp_save_state() is +always entered with FPEXC.EX cleared. (The current value of FPEXC has +already been saved, so this does not corrupt the context. Clearing +FPEXC.EX has no effects on FPINST or FPINST2. Also note that many +callers already modify FPEXC by setting FPEXC.EN before invoking +vfp_save_state().) + +This patch also addresses a second problem related to FPEXC.EX: After +returning from signal handling, the kernel reloads the VFP context +from the user mode stack. However, the current code explicitly clears +both FPEXC.EX and FPEXC.FP2V during reload. As VFP11 requires these +bits to be preserved, this patch disables clearing them for VFP +implementations belonging to architecture 1. There should be no +negative side effects: the user can set both bits by executing FPU +opcodes anyway, and while user code may now place arbitrary values +into FPINST and FPINST2 (e.g., non-VFP ARM opcodes) the VFP support +code knows which instructions can be emulated, and rejects other +opcodes with "unhandled bounce" messages, so there should be no +security impact from allowing reloading FPEXC.EX and FPEXC.FP2V. + +Signed-off-by: Christopher Alexander Tobias Schulze +--- + arch/arm/vfp/vfpmodule.c | 27 ++++++++++++++++++++------- + 1 file changed, 20 insertions(+), 7 deletions(-) + +diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c +index 2a61e4b..7675518 100644 +--- a/arch/arm/vfp/vfpmodule.c ++++ b/arch/arm/vfp/vfpmodule.c +@@ -183,8 +183,11 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) + * case the thread migrates to a different CPU. The + * restoring is done lazily. + */ +- if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu]) +- vfp_save_state(vfp_current_hw_state[cpu], fpexc); ++ if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu]) { ++ /* vfp_save_state oopses on VFP11 if EX bit set */ ++ fmxr(FPEXC, fpexc & ~FPEXC_EX); ++ vfp_save_state(vfp_current_hw_state[cpu], fpexc); ++ } + #endif + + /* +@@ -467,13 +470,16 @@ static int vfp_pm_suspend(void) + /* if vfp is on, then save state for resumption */ + if (fpexc & FPEXC_EN) { + pr_debug("%s: saving vfp state\n", __func__); ++ /* vfp_save_state oopses on VFP11 if EX bit set */ ++ fmxr(FPEXC, fpexc & ~FPEXC_EX); + vfp_save_state(&ti->vfpstate, fpexc); + + /* disable, just in case */ + fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); + } else if (vfp_current_hw_state[ti->cpu]) { + #ifndef CONFIG_SMP +- fmxr(FPEXC, fpexc | FPEXC_EN); ++ /* vfp_save_state oopses on VFP11 if EX bit set */ ++ fmxr(FPEXC, (fpexc & ~FPEXC_EX) | FPEXC_EN); + vfp_save_state(vfp_current_hw_state[ti->cpu], fpexc); + fmxr(FPEXC, fpexc); + #endif +@@ -536,7 +542,8 @@ void vfp_sync_hwstate(struct thread_info *thread) + /* + * Save the last VFP state on this CPU. + */ +- fmxr(FPEXC, fpexc | FPEXC_EN); ++ /* vfp_save_state oopses on VFP11 if EX bit set */ ++ fmxr(FPEXC, (fpexc & ~FPEXC_EX) | FPEXC_EN); + vfp_save_state(&thread->vfpstate, fpexc | FPEXC_EN); + fmxr(FPEXC, fpexc); + } +@@ -608,6 +615,7 @@ int vfp_restore_user_hwstate(struct user_vfp __user *ufp, + struct vfp_hard_struct *hwstate = &thread->vfpstate.hard; + unsigned long fpexc; + int err = 0; ++ u32 fpsid = fmrx(FPSID); + + /* Disable VFP to avoid corrupting the new thread state. */ + vfp_flush_hwstate(thread); +@@ -631,8 +639,12 @@ int vfp_restore_user_hwstate(struct user_vfp __user *ufp, + /* Ensure the VFP is enabled. */ + fpexc |= FPEXC_EN; + +- /* Ensure FPINST2 is invalid and the exception flag is cleared. */ +- fpexc &= ~(FPEXC_EX | FPEXC_FP2V); ++ /* Mask FPXEC_EX and FPEXC_FP2V if not required by VFP arch */ ++ if ((fpsid & FPSID_ARCH_MASK) != (1 << FPSID_ARCH_BIT)) { ++ /* Ensure FPINST2 is invalid and the exception flag is cleared. */ ++ fpexc &= ~(FPEXC_EX | FPEXC_FP2V); ++ } ++ + hwstate->fpexc = fpexc; + + __get_user_error(hwstate->fpinst, &ufp_exc->fpinst, err); +@@ -702,7 +714,8 @@ void kernel_neon_begin(void) + cpu = get_cpu(); + + fpexc = fmrx(FPEXC) | FPEXC_EN; +- fmxr(FPEXC, fpexc); ++ /* vfp_save_state oopses on VFP11 if EX bit set */ ++ fmxr(FPEXC, fpexc & ~FPEXC_EX); + + /* + * Save the userland NEON/VFP state. Under UP, +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0590-dwc_otg-fix-summarize-urb-actual_length-for-isochron.patch b/target/linux/brcm2708/patches-4.4/0590-dwc_otg-fix-summarize-urb-actual_length-for-isochron.patch new file mode 100644 index 00000000000..e7990816620 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0590-dwc_otg-fix-summarize-urb-actual_length-for-isochron.patch @@ -0,0 +1,33 @@ +From 83672d68ed0199fbe119510626116a32622e4003 Mon Sep 17 00:00:00 2001 +From: Martin Cerveny +Date: Mon, 13 Feb 2017 17:23:47 +0100 +Subject: [PATCH] dwc_otg: fix summarize urb->actual_length for isochronous + transfers + +Kernel does not copy input data of ISO transfers to userspace +if actual_length is set only in ISO transfers and not summarized +in urb->actual_length. Fixes raspberrypi/linux#903 +--- + drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 2 ++ + 1 file changed, 2 insertions(+) + +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c +index 2ceed42..5011750 100644 +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c +@@ -325,10 +325,12 @@ static int _complete(dwc_otg_hcd_t * hcd, void *urb_handle, + int i; + + urb->error_count = dwc_otg_hcd_urb_get_error_count(dwc_otg_urb); ++ urb->actual_length = 0; + for (i = 0; i < urb->number_of_packets; ++i) { + urb->iso_frame_desc[i].actual_length = + dwc_otg_hcd_urb_get_iso_desc_actual_length + (dwc_otg_urb, i); ++ urb->actual_length += urb->iso_frame_desc[i].actual_length; + urb->iso_frame_desc[i].status = + dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_urb, i); + } +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.4/0591-BCM270X_DT-Add-bcm2708-rpi-0-w.dts.patch b/target/linux/brcm2708/patches-4.4/0591-BCM270X_DT-Add-bcm2708-rpi-0-w.dts.patch new file mode 100644 index 00000000000..b4e18795b27 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0591-BCM270X_DT-Add-bcm2708-rpi-0-w.dts.patch @@ -0,0 +1,236 @@ +From 97425acaefeeb2bf4a704225b544cdd863bc5bc6 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 24 May 2016 16:30:05 +0100 +Subject: [PATCH] BCM270X_DT: Add bcm2708-rpi-0-w.dts + +Add DT support for the Pi Zero W. N.B. It will not be loaded +automatically without a corresponding change to the firmware. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/bcm2708-rpi-0-w.dts | 200 ++++++++++++++++++++++++++++++++++ + 2 files changed, 201 insertions(+) + create mode 100644 arch/arm/boot/dts/bcm2708-rpi-0-w.dts + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index 14a491c..bd963ef 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -2,6 +2,7 @@ ifeq ($(CONFIG_OF),y) + + dtb-$(CONFIG_ARCH_BCM2708) += bcm2708-rpi-b.dtb + dtb-$(CONFIG_ARCH_BCM2708) += bcm2708-rpi-b-plus.dtb ++dtb-$(CONFIG_ARCH_BCM2708) += bcm2708-rpi-0-w.dtb + dtb-$(CONFIG_ARCH_BCM2708) += bcm2708-rpi-cm.dtb + dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-cm.dtb + dtb-$(CONFIG_ARCH_BCM2709) += bcm2709-rpi-2-b.dtb +diff --git a/arch/arm/boot/dts/bcm2708-rpi-0-w.dts b/arch/arm/boot/dts/bcm2708-rpi-0-w.dts +new file mode 100644 +index 0000000..9f7de60 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-0-w.dts +@@ -0,0 +1,200 @@ ++/dts-v1/; ++ ++#include "bcm2708.dtsi" ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ model = "Raspberry Pi Zero W"; ++}; ++ ++&gpio { ++ sdhost_pins: sdhost_pins { ++ brcm,pins = <48 49 50 51 52 53>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ sdio_pins: sdio_pins { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,function = <7 7 7 7 7 7>; /* ALT3 = SD1 */ ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ bt_pins: bt_pins { ++ brcm,pins = <43>; ++ brcm,function = <4>; /* alt0:GPCLK2 */ ++ brcm,pull = <0>; /* none */ ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins = <30 31 32 33>; ++ brcm,function = <7>; /* alt3=UART0 */ ++ brcm,pull = <2 0 0 2>; /* up none none up */ ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <>; ++ brcm,function = <>; ++ }; ++}; ++ ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_pins>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&mmc { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ non-removable; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&fb { ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins &bt_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ #sound-dai-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&random { ++ status = "okay"; ++}; ++ ++&leds { ++ act_led: act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 47 0>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&audio { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++/ { ++ chosen { ++ bootargs = "8250.nr_uarts=1"; ++ }; ++}; ++ ++/ { ++ __overrides__ { ++ uart0 = <&uart0>,"status"; ++ uart0_clkrate = <&clk_uart0>,"clock-frequency:0"; ++ uart1 = <&uart1>,"status"; ++ i2s = <&i2s>,"status"; ++ spi = <&spi0>,"status"; ++ i2c0 = <&i2c0>,"status"; ++ i2c1 = <&i2c1>,"status"; ++ i2c2_iknowwhatimdoing = <&i2c2>,"status"; ++ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; ++ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; ++ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; ++ core_freq = <&clk_core>,"clock-frequency:0"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ audio = <&audio>,"status"; ++ watchdog = <&watchdog>,"status"; ++ random = <&random>,"status"; ++ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; ++ sd_force_pio = <&sdhost>,"brcm,force-pio?"; ++ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; ++ sd_debug = <&sdhost>,"brcm,debug"; ++ }; ++}; +-- +2.1.4 +