From: Pascal Ernster Date: Sun, 4 Jun 2023 19:41:32 +0000 (+0200) Subject: realtek: Use MII_BMCR and BMCR_* constants from X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8b2f654d4ca4db4204803c37610ed29a19198638;p=openwrt%2Fstaging%2Fmans0n.git realtek: Use MII_BMCR and BMCR_* constants from Replace numerical values, BIT(x) and (1 << x) in drivers/net/phy/rtl83xx-phy.c with constants from to improve code readability. To make reviewing easier, this commit only addresses MII_BMCR and BMCR_* constants. Suggested-by: DENG Qingfang Signed-off-by: Pascal Ernster --- diff --git a/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c b/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c index d47ba3e013..8e3fd3e3fe 100644 --- a/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c +++ b/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include "rtl83xx-phy.h" @@ -19,9 +20,6 @@ extern struct rtl83xx_soc_info soc_info; extern struct mutex smi_lock; -#define PHY_CTRL_REG 0 -#define PHY_POWER_BIT 11 - #define PHY_PAGE_2 2 #define PHY_PAGE_4 4 @@ -124,23 +122,23 @@ static int resume_polling(u64 saved_state) static void rtl8380_int_phy_on_off(struct phy_device *phydev, bool on) { - phy_modify(phydev, 0, BIT(11), on?0:BIT(11)); + phy_modify(phydev, 0, BMCR_PDOWN, on ? 0 : BMCR_PDOWN); } static void rtl8380_rtl8214fc_on_off(struct phy_device *phydev, bool on) { /* fiber ports */ phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_FIBRE); - phy_modify(phydev, 0x10, BIT(11), on?0:BIT(11)); + phy_modify(phydev, 0x10, BMCR_PDOWN, on ? 0 : BMCR_PDOWN); /* copper ports */ phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); - phy_modify_paged(phydev, RTL821X_PAGE_POWER, 0x10, BIT(11), on?0:BIT(11)); + phy_modify_paged(phydev, RTL821X_PAGE_POWER, 0x10, BMCR_PDOWN, on ? 0 : BMCR_PDOWN); } static void rtl8380_phy_reset(struct phy_device *phydev) { - phy_modify(phydev, 0, BIT(15), BIT(15)); + phy_modify(phydev, 0, BMCR_RESET, BMCR_RESET); } /* The access registers for SDS_MODE_SEL and the LSB for each SDS within */ @@ -748,8 +746,8 @@ static int rtl8380_configure_int_rtl8218b(struct phy_device *phydev) // int ipd_flag = 1; // } - val = phy_read(phydev, 0); - if (val & BIT(11)) + val = phy_read(phydev, MII_BMCR); + if (val & BMCR_PDOWN) rtl8380_int_phy_on_off(phydev, true); else rtl8380_phy_reset(phydev); @@ -839,8 +837,8 @@ static int rtl8380_configure_ext_rtl8218b(struct phy_device *phydev) rtl8218B_6276B_rtl8380_perport = (void *)h + sizeof(struct fw_header) + h->parts[1].start; rtl8380_rtl8218b_perport = (void *)h + sizeof(struct fw_header) + h->parts[2].start; - val = phy_read(phydev, 0); - if (val & (1 << 11)) + val = phy_read(phydev, MII_BMCR); + if (val & BMCR_PDOWN) rtl8380_int_phy_on_off(phydev, true); else rtl8380_phy_reset(phydev); @@ -939,7 +937,7 @@ static bool rtl8214fc_media_is_fibre(struct phy_device *phydev) val = phy_package_read_paged(phydev, RTL821X_PAGE_PORT, reg[mac % 4]); phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); - if (val & BIT(11)) + if (val & BMCR_PDOWN) return false; return true; @@ -958,9 +956,9 @@ static void rtl8214fc_power_set(struct phy_device *phydev, int port, bool on) } if (on) { - phy_modify_paged(phydev, RTL821X_PAGE_POWER, 0x10, BIT(11), 0); + phy_modify_paged(phydev, RTL821X_PAGE_POWER, 0x10, BMCR_PDOWN, 0); } else { - phy_modify_paged(phydev, RTL821X_PAGE_POWER, 0x10, 0, BIT(11)); + phy_modify_paged(phydev, RTL821X_PAGE_POWER, 0x10, 0, BMCR_PDOWN); } phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); @@ -1000,9 +998,9 @@ static void rtl8214fc_media_set(struct phy_device *phydev, bool set_fibre) val |= BIT(10); if (set_fibre) { - val &= ~BIT(11); + val &= ~BMCR_PDOWN; } else { - val |= BIT(11); + val |= BMCR_PDOWN; } phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL); @@ -1057,8 +1055,8 @@ void rtl8218d_eee_set(struct phy_device *phydev, bool enable) /* Set GPHY page to copper */ phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); - val = phy_read(phydev, 0); - an_enabled = val & BIT(12); + val = phy_read(phydev, MII_BMCR); + an_enabled = val & BMCR_ANENABLE; /* Enable 100M (bit 1) / 1000M (bit 2) EEE */ val = phy_read_mmd(phydev, 7, 60); @@ -1075,9 +1073,9 @@ void rtl8218d_eee_set(struct phy_device *phydev, bool enable) /* Restart AN if enabled */ if (an_enabled) { - val = phy_read(phydev, 0); - val |= BIT(9); - phy_write(phydev, 0, val); + val = phy_read(phydev, MII_BMCR); + val |= BMCR_ANRESTART; + phy_write(phydev, MII_BMCR, val); } /* GPHY page back to auto */ @@ -1155,8 +1153,8 @@ static int rtl8214fc_set_eee(struct phy_device *phydev, phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); /* Get auto-negotiation status */ - val = phy_read(phydev, 0); - an_enabled = val & BIT(12); + val = phy_read(phydev, MII_BMCR); + an_enabled = val & BMCR_ANENABLE; pr_info("%s: aneg: %d\n", __func__, an_enabled); val = phy_read_paged(phydev, RTL821X_PAGE_MAC, 25); @@ -1178,9 +1176,9 @@ static int rtl8214fc_set_eee(struct phy_device *phydev, /* Restart AN if enabled */ if (an_enabled) { pr_info("%s: doing aneg\n", __func__); - val = phy_read(phydev, 0); - val |= BIT(9); - phy_write(phydev, 0, val); + val = phy_read(phydev, MII_BMCR); + val |= BMCR_ANRESTART; + phy_write(phydev, MII_BMCR, val); } /* GPHY page back to auto */ @@ -1218,8 +1216,8 @@ static int rtl8218b_set_eee(struct phy_device *phydev, struct ethtool_eee *e) /* Set GPHY page to copper */ phy_write(phydev, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); - val = phy_read(phydev, 0); - an_enabled = val & BIT(12); + val = phy_read(phydev, MII_BMCR); + an_enabled = val & BMCR_ANENABLE; if (e->eee_enabled) { /* 100/1000M EEE Capability */ @@ -1245,9 +1243,9 @@ static int rtl8218b_set_eee(struct phy_device *phydev, struct ethtool_eee *e) /* Restart AN if enabled */ if (an_enabled) { - val = phy_read(phydev, 0); - val |= BIT(9); - phy_write(phydev, 0, val); + val = phy_read(phydev, MII_BMCR); + val |= BMCR_ANRESTART; + phy_write(phydev, MII_BMCR, val); } /* GPHY page back to auto */ @@ -1342,7 +1340,7 @@ static int rtl8380_configure_rtl8214fc(struct phy_device *phydev) val = phy_read_paged(phydev, RTL83XX_PAGE_RAW, 28); val = phy_read(phydev, 16); - if (val & (1 << 11)) + if (val & BMCR_PDOWN) rtl8380_rtl8214fc_on_off(phydev, true); else rtl8380_phy_reset(phydev); @@ -2750,17 +2748,17 @@ void rtl9300_phy_enable_10g_1g(int sds_num) u32 v; /* Enable 1GBit PHY */ - v = rtl930x_read_sds_phy(sds_num, PHY_PAGE_2, PHY_CTRL_REG); + v = rtl930x_read_sds_phy(sds_num, PHY_PAGE_2, MII_BMCR); pr_info("%s 1gbit phy: %08x\n", __func__, v); - v &= ~BIT(PHY_POWER_BIT); - rtl930x_write_sds_phy(sds_num, PHY_PAGE_2, PHY_CTRL_REG, v); + v &= ~BMCR_PDOWN; + rtl930x_write_sds_phy(sds_num, PHY_PAGE_2, MII_BMCR, v); pr_info("%s 1gbit phy enabled: %08x\n", __func__, v); /* Enable 10GBit PHY */ - v = rtl930x_read_sds_phy(sds_num, PHY_PAGE_4, PHY_CTRL_REG); + v = rtl930x_read_sds_phy(sds_num, PHY_PAGE_4, MII_BMCR); pr_info("%s 10gbit phy: %08x\n", __func__, v); - v &= ~BIT(PHY_POWER_BIT); - rtl930x_write_sds_phy(sds_num, PHY_PAGE_4, PHY_CTRL_REG, v); + v &= ~BMCR_PDOWN; + rtl930x_write_sds_phy(sds_num, PHY_PAGE_4, MII_BMCR, v); pr_info("%s 10gbit phy after: %08x\n", __func__, v); /* dal_longan_construct_mac_default_10gmedia_fiber */