From: Sebastian Schaper <openwrt@sebastianschaper.net>
Date: Mon, 30 Nov 2020 19:09:29 +0000 (+0100)
Subject: ath79: add support for D-Link DAP-3320 A1
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8ae2ee99c60382f9f5130009397fd36e40900447;p=openwrt%2Fstaging%2Fynezz.git

ath79: add support for D-Link DAP-3320 A1

Specifications:
 * QCA9533, 16 MiB Flash, 64 MiB RAM, 802.11n 2T2R
 * 10/100 Ethernet Port, 802.11af PoE
 * IP55 pole-mountable outdoor case

Installation:
 * Factory Web UI is at 192.168.0.50
   login with 'admin' and blank password, flash factory.bin
 * Recovery Web UI is at 192.168.0.50
   connect network cable, hold reset button during power-on and keep it
   pressed until uploading has started (only required when checksum is ok,
   e.g. for reverting back to oem firmware), flash factory.bin

After flashing factory.bin, additional free space can be reclaimed by
flashing sysupgrade.bin, since the factory image requires some padding
to be accepted for upgrading via OEM Web UI.

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
---

diff --git a/target/linux/ath79/dts/qca9533_dlink_dap-3320-a1.dts b/target/linux/ath79/dts/qca9533_dlink_dap-3320-a1.dts
new file mode 100644
index 0000000000..97f2f62b4a
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_dlink_dap-3320-a1.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+#include "qca95xx_dlink_dap-2xxx.dtsi"
+
+/ {
+	compatible = "dlink,dap-3320-a1", "qca,qca9533";
+	model = "D-Link DAP-3320 A1";
+
+	aliases {
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_green;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power_green: power_green {
+			label = "green:power";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+};
+
+&partitions {
+	partition@70000 {
+		label = "firmware";
+		reg = <0x70000 0xef0000>;
+		compatible = "wrg";
+	};
+
+	partition@f60000 {
+		label = "dlink";
+		reg = <0xf60000 0x90000>;
+		read-only;
+	};
+
+	art: partition@ff0000 {
+		label = "art";
+		reg = <0xff0000 0x10000>;
+		read-only;
+	};
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 23b824d7e3..20cf561add 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -29,6 +29,7 @@ ath79_setup_interfaces()
 	dlink,dap-1365-a1|\
 	dlink,dap-2230-a1|\
 	dlink,dap-2680-a1|\
+	dlink,dap-3320-a1|\
 	dlink,dir-505|\
 	engenius,eap300-v2|\
 	engenius,eap350-v1|\
@@ -485,7 +486,8 @@ ath79_setup_macs()
 		;;
 	dlink,dap-2230-a1|\
 	dlink,dap-2660-a1|\
-	dlink,dap-2680-a1)
+	dlink,dap-2680-a1|\
+	dlink,dap-3320-a1)
 		lan_mac=$(mtd_get_mac_ascii bdcfg "lanmac")
 		label_mac=$lan_mac
 		;;
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index 8923a2cb11..5edc2e4a86 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -22,7 +22,8 @@ case "$board" in
 	dlink,dch-g020-a1)
 		mtd_get_mac_text "mp" 0x13 > /sys${DEVPATH}/macaddress
 		;;
-	dlink,dap-2230-a1)
+	dlink,dap-2230-a1|\
+	dlink,dap-3320-a1)
 		mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
 		;;
 	dlink,dap-2660-a1|\
diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum b/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum
index 0bbe321788..b522563f17 100644
--- a/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum
+++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum
@@ -16,7 +16,8 @@ case "$board" in
 dlink,dap-2230-a1|\
 dlink,dap-2660-a1|\
 dlink,dap-2680-a1|\
-dlink,dap-2695-a1)
+dlink,dap-2695-a1|\
+dlink,dap-3320-a1)
 	fixwrgg
 	;;
 qihoo,c301)
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 26ab0fcb34..190f477b7e 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -804,6 +804,17 @@ define Device/dlink_dap-2695-a1
 endef
 TARGET_DEVICES += dlink_dap-2695-a1
 
+define Device/dlink_dap-3320-a1
+  $(Device/dlink_dap-2xxx)
+  SOC := qca9533
+  DEVICE_VENDOR := D-Link
+  DEVICE_MODEL := DAP-3320
+  DEVICE_VARIANT := A1
+  IMAGE_SIZE := 15296k
+  DAP_SIGNATURE := wapn29_dkbs_dap3320
+endef
+TARGET_DEVICES += dlink_dap-3320-a1
+
 define Device/dlink_dch-g020-a1
   SOC := qca9531
   DEVICE_VENDOR := D-Link