From: Felix Fietkau Date: Tue, 10 Nov 2009 22:00:59 +0000 (+0000) Subject: hostapd: use the new build variants feature to clean up the makefile X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8a89f203a0abad5f82595559837c24b6de8125ea;p=openwrt%2Fstaging%2Fnbd.git hostapd: use the new build variants feature to clean up the makefile SVN-Revision: 18358 --- diff --git a/package/hostapd/Makefile b/package/hostapd/Makefile index ddf21683bd..d8a3ac8ac9 100644 --- a/package/hostapd/Makefile +++ b/package/hostapd/Makefile @@ -29,6 +29,8 @@ PKG_CONFIG_DEPENDS:= \ CONFIG_PACKAGE_hostapd-mini \ CONFIG_PACKAGE_kmod-hostap +PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION) + include $(INCLUDE_DIR)/package.mk DRIVER_MAKEOPTS= \ @@ -49,12 +51,9 @@ define Package/hostapd $(call Package/hostapd/Default) TITLE+= (full) DEPENDS+= +PACKAGE_hostapd:libopenssl + VARIANT:=full endef -#define Package/hostapd/conffiles -#/etc/hostapd.conf -#endef - define Package/hostapd/description This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS Authenticator. @@ -63,15 +62,11 @@ endef define Package/hostapd-mini $(call Package/hostapd/Default) TITLE+= (WPA-PSK only) + VARIANT:=mini endef -#define Package/hostapd-mini/conffiles -#/etc/hostapd.conf -#endef - define Package/hostapd-mini/description - This package contains a minimal IEEE 802.1x/WPA/EAP/RADIUS Authenticator - (WPA-PSK only). + This package contains a minimal IEEE 802.1x/WPA Authenticator (WPA-PSK only). endef define Package/hostapd-utils @@ -85,14 +80,8 @@ define Package/hostapd-utils/description IEEE 802.1x/WPA/EAP/RADIUS Authenticator. endef -define Build/ConfigureTarget - rm -rf $(PKG_BUILD_DIR)/hostapd.$(1) - mkdir -p $(PKG_BUILD_DIR)/hostapd.$(1) - $(CP) \ - $(PKG_BUILD_DIR)/hostapd \ - $(PKG_BUILD_DIR)/src \ - $(PKG_BUILD_DIR)/hostapd.$(1)/ - $(CP) ./files/$(1).config $(PKG_BUILD_DIR)/hostapd.$(1)/hostapd/.config +define Build/Configure + $(CP) ./files/$(BUILD_VARIANT).config $(PKG_BUILD_DIR)/hostapd/.config endef TARGET_CPPFLAGS := \ @@ -104,66 +93,40 @@ TARGET_CPPFLAGS := \ -DCONFIG_LIBNL20 \ -D_GNU_SOURCE -define Build/CompileTarget +ifdef CONFIG_PACKAGE_kmod-mac80211 + TARGET_LDFLAGS += -lm -lnl-tiny +endif +ifeq ($(BUILD_VARIANT),full) + TARGET_LDFLAGS += -lssl -lcrypto +endif + +define Build/Compile CFLAGS="$(TARGET_CPPFLAGS) $(TARGET_CFLAGS)" \ - $(MAKE) -C $(PKG_BUILD_DIR)/hostapd.$(1)/hostapd \ + $(MAKE) -C $(PKG_BUILD_DIR)/hostapd \ $(TARGET_CONFIGURE_OPTS) \ $(DRIVER_MAKEOPTS) \ - LIBS="$(TARGET_LDFLAGS) \ - $(if $(CONFIG_PACKAGE_kmod-mac80211),-lm -lnl-tiny) \ - $(if $(findstring default,$(1)),-lssl -lcrypto)" \ + LIBS="$(TARGET_LDFLAGS)" \ hostapd hostapd_cli - $(CP) $(PKG_BUILD_DIR)/hostapd.$(1)/hostapd/hostapd_cli $(PKG_BUILD_DIR)/ endef define Package/InstallTemplate - $(INSTALL_DIR) $$(1)/lib/wifi - $(INSTALL_DATA) ./files/hostapd.sh $$(1)/lib/wifi/hostapd.sh - $(INSTALL_DIR) $$(1)/usr/sbin - $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd.$(2)/hostapd/hostapd $$(1)/usr/sbin/ -# config is managed through uci -# $(INSTALL_DIR) $$(1)/etc -# $(INSTALL_CONF) $(PKG_BUILD_DIR)/hostapd.$(2)/hostapd/hostapd.conf $$(1)/etc/hostapd.conf -endef - -define Package/Template - ifneq ($(CONFIG_PACKAGE_$(1)),) - define Build/Configure/$(2) - $(call Build/ConfigureTarget,$(2)) - endef - define Build/Compile/$(2) - $(call Build/CompileTarget,$(2)) - endef - define Package/$(1)/install - $(call Package/InstallTemplate,$(1),$(2)) - endef - endif -endef - -define Build/Configure - rm -f $(PKG_BUILD_DIR)/.configured* - $(call Build/Configure/default) - $(call Build/Configure/mini) -endef - -define Build/Compile - $(call Build/Compile/default) - $(call Build/Compile/mini) + $(INSTALL_DIR) $(1)/lib/wifi + $(INSTALL_DATA) ./files/hostapd.sh $(1)/lib/wifi/hostapd.sh + $(INSTALL_DIR) $(1)/usr/sbin + $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd $(1)/usr/sbin/ endef -define Build/Clean - rm -rf $(PKG_BUILD_DIR)_default - rm -rf $(PKG_BUILD_DIR)_mini -endef +ifeq ($(BUILD_VARIANT),full) + Package/hostapd/install = $(Package/InstallTemplate) +else + Package/hostapd-mini/install = $(Package/InstallTemplate) +endif define Package/hostapd-utils/install $(INSTALL_DIR) $(1)/usr/sbin $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd_cli $(1)/usr/sbin/ endef -$(eval $(call Package/Template,hostapd,default)) -$(eval $(call Package/Template,hostapd-mini,mini)) - $(eval $(call BuildPackage,hostapd)) $(eval $(call BuildPackage,hostapd-mini)) $(eval $(call BuildPackage,hostapd-utils)) diff --git a/package/hostapd/files/default.config b/package/hostapd/files/default.config deleted file mode 100644 index 8643a2b0ae..0000000000 --- a/package/hostapd/files/default.config +++ /dev/null @@ -1,144 +0,0 @@ -# Example hostapd build time configuration -# -# This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cass, these lines should use += in order not -# to override previous values of the variables. - -# Driver interface for Host AP driver -CONFIG_DRIVER_HOSTAP=y - -# Driver interface for wired authenticator -CONFIG_DRIVER_WIRED=y - -# Driver interface for madwifi driver -CONFIG_DRIVER_MADWIFI=y -#CFLAGS += -I../../madwifi # change to the madwifi source directory - -# Driver interface for Prism54 driver -#CONFIG_DRIVER_PRISM54=y - -# Driver interface for drivers using the nl80211 kernel interface -CONFIG_DRIVER_NL80211=y -# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be -# shipped with your distribution yet. If that is the case, you need to build -# newer libnl version and point the hostapd build to use it. -#LIBNL=/usr/src/libnl -#CFLAGS += -I$(LIBNL)/include -#LIBS += -L$(LIBNL)/lib - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -#CONFIG_DRIVER_BSD=y -#CFLAGS += -I/usr/local/include -#LIBS += -L/usr/local/lib - -# Driver interface for no driver (e.g., RADIUS server only) -#CONFIG_DRIVER_NONE=y - -# IEEE 802.11F/IAPP -CONFIG_IAPP=y - -# WPA2/IEEE 802.11i RSN pre-authentication -CONFIG_RSN_PREAUTH=y - -# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) -CONFIG_PEERKEY=y - -# IEEE 802.11w (management frame protection) -# This version is an experimental implementation based on IEEE 802.11w/D1.0 -# draft and is subject to change since the standard has not yet been finalized. -# Driver support is also needed for IEEE 802.11w. -#CONFIG_IEEE80211W=y - -# Integrated EAP server -CONFIG_EAP=y - -# EAP-MD5 for the integrated EAP server -CONFIG_EAP_MD5=y - -# EAP-TLS for the integrated EAP server -CONFIG_EAP_TLS=y - -# EAP-MSCHAPv2 for the integrated EAP server -CONFIG_EAP_MSCHAPV2=y - -# EAP-PEAP for the integrated EAP server -CONFIG_EAP_PEAP=y - -# EAP-GTC for the integrated EAP server -CONFIG_EAP_GTC=y - -# EAP-TTLS for the integrated EAP server -CONFIG_EAP_TTLS=y - -# EAP-SIM for the integrated EAP server -#CONFIG_EAP_SIM=y - -# EAP-AKA for the integrated EAP server -#CONFIG_EAP_AKA=y - -# EAP-AKA' for the integrated EAP server -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# EAP-PAX for the integrated EAP server -#CONFIG_EAP_PAX=y - -# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y - -# EAP-SAKE for the integrated EAP server -#CONFIG_EAP_SAKE=y - -# EAP-GPSK for the integrated EAP server -#CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y - -# EAP-FAST for the integrated EAP server -# Note: Default OpenSSL package does not include support for all the -# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, -# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch) -# to add the needed functions. -#CONFIG_EAP_FAST=y - -# Wi-Fi Protected Setup (WPS) -#CONFIG_WPS=y -# Enable UPnP support for external WPS Registrars -#CONFIG_WPS_UPNP=y - -# EAP-IKEv2 -#CONFIG_EAP_IKEV2=y - -# Trusted Network Connect (EAP-TNC) -#CONFIG_EAP_TNC=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -CONFIG_PKCS12=y - -# RADIUS authentication server. This provides access to the integrated EAP -# server from external hosts using RADIUS. -#CONFIG_RADIUS_SERVER=y - -# Build IPv6 support for RADIUS operations -CONFIG_IPV6=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y - -# Use the hostapd's IEEE 802.11 authentication (ACL), but without -# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) -#CONFIG_DRIVER_RADIUS_ACL=y - -# IEEE 802.11n (High Throughput) support -CONFIG_IEEE80211N=y - -# Remove debugging code that is printing out debug messages to stdout. -# This can be used to reduce the size of the hostapd considerably if debugging -# code is not needed. -#CONFIG_NO_STDOUT_DEBUG=y diff --git a/package/hostapd/files/full.config b/package/hostapd/files/full.config new file mode 100644 index 0000000000..8643a2b0ae --- /dev/null +++ b/package/hostapd/files/full.config @@ -0,0 +1,144 @@ +# Example hostapd build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cass, these lines should use += in order not +# to override previous values of the variables. + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for wired authenticator +CONFIG_DRIVER_WIRED=y + +# Driver interface for madwifi driver +CONFIG_DRIVER_MADWIFI=y +#CFLAGS += -I../../madwifi # change to the madwifi source directory + +# Driver interface for Prism54 driver +#CONFIG_DRIVER_PRISM54=y + +# Driver interface for drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=y +# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be +# shipped with your distribution yet. If that is the case, you need to build +# newer libnl version and point the hostapd build to use it. +#LIBNL=/usr/src/libnl +#CFLAGS += -I$(LIBNL)/include +#LIBS += -L$(LIBNL)/lib + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib + +# Driver interface for no driver (e.g., RADIUS server only) +#CONFIG_DRIVER_NONE=y + +# IEEE 802.11F/IAPP +CONFIG_IAPP=y + +# WPA2/IEEE 802.11i RSN pre-authentication +CONFIG_RSN_PREAUTH=y + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection) +# This version is an experimental implementation based on IEEE 802.11w/D1.0 +# draft and is subject to change since the standard has not yet been finalized. +# Driver support is also needed for IEEE 802.11w. +#CONFIG_IEEE80211W=y + +# Integrated EAP server +CONFIG_EAP=y + +# EAP-MD5 for the integrated EAP server +CONFIG_EAP_MD5=y + +# EAP-TLS for the integrated EAP server +CONFIG_EAP_TLS=y + +# EAP-MSCHAPv2 for the integrated EAP server +CONFIG_EAP_MSCHAPV2=y + +# EAP-PEAP for the integrated EAP server +CONFIG_EAP_PEAP=y + +# EAP-GTC for the integrated EAP server +CONFIG_EAP_GTC=y + +# EAP-TTLS for the integrated EAP server +CONFIG_EAP_TTLS=y + +# EAP-SIM for the integrated EAP server +#CONFIG_EAP_SIM=y + +# EAP-AKA for the integrated EAP server +#CONFIG_EAP_AKA=y + +# EAP-AKA' for the integrated EAP server +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + +# EAP-PAX for the integrated EAP server +#CONFIG_EAP_PAX=y + +# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-SAKE for the integrated EAP server +#CONFIG_EAP_SAKE=y + +# EAP-GPSK for the integrated EAP server +#CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +#CONFIG_EAP_GPSK_SHA256=y + +# EAP-FAST for the integrated EAP server +# Note: Default OpenSSL package does not include support for all the +# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, +# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch) +# to add the needed functions. +#CONFIG_EAP_FAST=y + +# Wi-Fi Protected Setup (WPS) +#CONFIG_WPS=y +# Enable UPnP support for external WPS Registrars +#CONFIG_WPS_UPNP=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + +# Trusted Network Connect (EAP-TNC) +#CONFIG_EAP_TNC=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# RADIUS authentication server. This provides access to the integrated EAP +# server from external hosts using RADIUS. +#CONFIG_RADIUS_SERVER=y + +# Build IPv6 support for RADIUS operations +CONFIG_IPV6=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Use the hostapd's IEEE 802.11 authentication (ACL), but without +# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) +#CONFIG_DRIVER_RADIUS_ACL=y + +# IEEE 802.11n (High Throughput) support +CONFIG_IEEE80211N=y + +# Remove debugging code that is printing out debug messages to stdout. +# This can be used to reduce the size of the hostapd considerably if debugging +# code is not needed. +#CONFIG_NO_STDOUT_DEBUG=y