From: Mian Yousaf Kaukab Date: Fri, 9 Jan 2015 12:39:03 +0000 (+0100) Subject: usb: dwc2: gadget: rename sent_zlp to send_zlp X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8a20fa457eb5a8d247fd82d4bd3c04225fd2f253;p=openwrt%2Fstaging%2Fblogic.git usb: dwc2: gadget: rename sent_zlp to send_zlp This flag is set before sending the zlp. So use present tense instead of the past tense. Tested-by: Robert Baldyga Acked-by: Paul Zimmerman Signed-off-by: Mian Yousaf Kaukab Signed-off-by: Felipe Balbi --- diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index e963aef1daa2..f09b3deffdee 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -108,7 +108,7 @@ struct s3c_hsotg_req; * @halted: Set if the endpoint has been halted. * @periodic: Set if this is a periodic ep, such as Interrupt * @isochronous: Set if this is a isochronous ep - * @sent_zlp: Set if we've sent a zero-length packet. + * @send_zlp: Set if we need to send a zero-length packet. * @total_data: The total number of data bytes done. * @fifo_size: The size of the FIFO (for periodic IN endpoints) * @fifo_load: The amount of data loaded into the FIFO (periodic IN) @@ -149,7 +149,7 @@ struct s3c_hsotg_ep { unsigned int halted:1; unsigned int periodic:1; unsigned int isochronous:1; - unsigned int sent_zlp:1; + unsigned int send_zlp:1; char name[10]; }; diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 65ec0f2dfab1..5fdc3f54f2a8 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -607,7 +607,7 @@ static void s3c_hsotg_start_req(struct dwc2_hsotg *hsotg, /* Test if zlp is actually required. */ if ((ureq->length >= hs_ep->ep.maxpacket) && !(ureq->length % hs_ep->ep.maxpacket)) - hs_ep->sent_zlp = 1; + hs_ep->send_zlp = 1; } epsize |= DXEPTSIZ_PKTCNT(packets); @@ -1193,7 +1193,7 @@ static void s3c_hsotg_enqueue_setup(struct dwc2_hsotg *hsotg) } hsotg->eps_out[0]->dir_in = 0; - hsotg->eps_out[0]->sent_zlp = 0; + hsotg->eps_out[0]->send_zlp = 0; hsotg->ep0_state = DWC2_EP0_SETUP; ret = s3c_hsotg_ep_queue(&hsotg->eps_out[0]->ep, req, GFP_ATOMIC); @@ -1757,9 +1757,9 @@ static void s3c_hsotg_complete_in(struct dwc2_hsotg *hsotg, } /* Zlp for all endpoints, for ep0 only in DATA IN stage */ - if (hs_ep->sent_zlp) { + if (hs_ep->send_zlp) { s3c_hsotg_program_zlp(hsotg, hs_ep); - hs_ep->sent_zlp = 0; + hs_ep->send_zlp = 0; /* transfer will be completed on next complete interrupt */ return; }