From: Magnus Kroken Date: Wed, 23 Aug 2017 21:13:34 +0000 (+0200) Subject: busybox: update to 1.27.2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=89f8a01daba938e77e94ef311233be49c23a7a55;p=openwrt%2Fstaging%2Fblogic.git busybox: update to 1.27.2 Refresh patches, delete patches backported from upstream. This fixes ntpd sync issues (ntpd would not sync if the first provided peer address was unreachable). Signed-off-by: Magnus Kroken Signed-off-by: Kevin Darbyshire-Bryant --- diff --git a/package/utils/busybox/Config-defaults.in b/package/utils/busybox/Config-defaults.in index 9438cb26e703..79059e50698c 100644 --- a/package/utils/busybox/Config-defaults.in +++ b/package/utils/busybox/Config-defaults.in @@ -7,6 +7,9 @@ config BUSYBOX_DEFAULT_DESKTOP config BUSYBOX_DEFAULT_EXTRA_COMPAT bool default n +config BUSYBOX_DEFAULT_FEDORA_COMPAT + bool + default n config BUSYBOX_DEFAULT_INCLUDE_SUSv2 bool default y @@ -196,9 +199,6 @@ config BUSYBOX_DEFAULT_FEATURE_FAST_TOP config BUSYBOX_DEFAULT_FEATURE_ETC_NETWORKS bool default n -config BUSYBOX_DEFAULT_FEATURE_USE_TERMIOS - bool - default n config BUSYBOX_DEFAULT_FEATURE_EDITING bool default y @@ -355,6 +355,9 @@ config BUSYBOX_DEFAULT_XZ config BUSYBOX_DEFAULT_BZIP2 bool default n +config BUSYBOX_DEFAULT_FEATURE_BZIP2_DECOMPRESS + bool + default y config BUSYBOX_DEFAULT_CPIO bool default n @@ -382,6 +385,9 @@ config BUSYBOX_DEFAULT_GZIP_FAST config BUSYBOX_DEFAULT_FEATURE_GZIP_LEVELS bool default n +config BUSYBOX_DEFAULT_FEATURE_GZIP_DECOMPRESS + bool + default y config BUSYBOX_DEFAULT_LZOP bool default n @@ -439,16 +445,25 @@ config BUSYBOX_DEFAULT_FEATURE_TAR_SELINUX config BUSYBOX_DEFAULT_UNZIP bool default n -config BUSYBOX_DEFAULT_BASENAME +config BUSYBOX_DEFAULT_FEATURE_UNZIP_CDF bool - default y -config BUSYBOX_DEFAULT_CAL + default n +config BUSYBOX_DEFAULT_FEATURE_UNZIP_BZIP2 bool default n +config BUSYBOX_DEFAULT_FEATURE_UNZIP_LZMA + bool + default n +config BUSYBOX_DEFAULT_FEATURE_UNZIP_XZ + bool + default n +config BUSYBOX_DEFAULT_BASENAME + bool + default y config BUSYBOX_DEFAULT_CAT bool default y -config BUSYBOX_DEFAULT_CATV +config BUSYBOX_DEFAULT_FEATURE_CATV bool default n config BUSYBOX_DEFAULT_CHGRP @@ -559,6 +574,9 @@ config BUSYBOX_DEFAULT_EXPR config BUSYBOX_DEFAULT_EXPR_MATH_SUPPORT_64 bool default y +config BUSYBOX_DEFAULT_FACTOR + bool + default n config BUSYBOX_DEFAULT_FALSE bool default y @@ -589,6 +607,9 @@ config BUSYBOX_DEFAULT_INSTALL config BUSYBOX_DEFAULT_FEATURE_INSTALL_LONG_OPTIONS bool default n +config BUSYBOX_DEFAULT_LINK + bool + default n config BUSYBOX_DEFAULT_LN bool default y @@ -607,6 +628,9 @@ config BUSYBOX_DEFAULT_FEATURE_LS_FOLLOWLINKS config BUSYBOX_DEFAULT_FEATURE_LS_RECURSIVE bool default y +config BUSYBOX_DEFAULT_FEATURE_LS_WIDTH + bool + default y config BUSYBOX_DEFAULT_FEATURE_LS_SORTFILES bool default y @@ -661,12 +685,21 @@ config BUSYBOX_DEFAULT_FEATURE_MV_LONG_OPTIONS config BUSYBOX_DEFAULT_NICE bool default y +config BUSYBOX_DEFAULT_NL + bool + default n config BUSYBOX_DEFAULT_NOHUP bool default n +config BUSYBOX_DEFAULT_NPROC + bool + default n config BUSYBOX_DEFAULT_OD bool default n +config BUSYBOX_DEFAULT_PASTE + bool + default n config BUSYBOX_DEFAULT_PRINTENV bool default n @@ -697,6 +730,9 @@ config BUSYBOX_DEFAULT_FEATURE_RMDIR_LONG_OPTIONS config BUSYBOX_DEFAULT_SEQ bool default y +config BUSYBOX_DEFAULT_SHRED + bool + default n config BUSYBOX_DEFAULT_SHUF bool default n @@ -829,6 +865,9 @@ config BUSYBOX_DEFAULT_FEATURE_WC_LARGE config BUSYBOX_DEFAULT_WHO bool default n +config BUSYBOX_DEFAULT_W + bool + default n config BUSYBOX_DEFAULT_USERS bool default n @@ -844,9 +883,6 @@ config BUSYBOX_DEFAULT_FEATURE_VERBOSE config BUSYBOX_DEFAULT_FEATURE_PRESERVE_HARDLINKS bool default y -config BUSYBOX_DEFAULT_FEATURE_AUTOWIDTH - bool - default y config BUSYBOX_DEFAULT_FEATURE_HUMAN_READABLE bool default y @@ -1174,7 +1210,7 @@ config BUSYBOX_DEFAULT_FEATURE_INIT_SCTTY config BUSYBOX_DEFAULT_FEATURE_INIT_SYSLOG bool default n -config BUSYBOX_DEFAULT_FEATURE_EXTRA_QUIET +config BUSYBOX_DEFAULT_FEATURE_INIT_QUIET bool default n config BUSYBOX_DEFAULT_FEATURE_INIT_COREDUMPS @@ -1294,6 +1330,9 @@ config BUSYBOX_DEFAULT_FEATURE_SU_SYSLOG config BUSYBOX_DEFAULT_FEATURE_SU_CHECKS_SHELLS bool default n +config BUSYBOX_DEFAULT_FEATURE_SU_BLANK_PW_NEEDS_SECURE_TTY + bool + default n config BUSYBOX_DEFAULT_SULOGIN bool default n @@ -1330,12 +1369,6 @@ config BUSYBOX_DEFAULT_FEATURE_LSMOD_PRETTY_2_6_OUTPUT config BUSYBOX_DEFAULT_MODINFO bool default n -config BUSYBOX_DEFAULT_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE - bool - default n -config BUSYBOX_DEFAULT_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED - bool - default n config BUSYBOX_DEFAULT_MODPROBE bool default n @@ -1345,10 +1378,13 @@ config BUSYBOX_DEFAULT_FEATURE_MODPROBE_BLACKLIST config BUSYBOX_DEFAULT_RMMOD bool default n -config BUSYBOX_DEFAULT_FEATURE_2_4_MODULES +config BUSYBOX_DEFAULT_FEATURE_CMDLINE_MODULE_OPTIONS bool default n -config BUSYBOX_DEFAULT_FEATURE_INSMOD_TRY_MMAP +config BUSYBOX_DEFAULT_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED + bool + default n +config BUSYBOX_DEFAULT_FEATURE_2_4_MODULES bool default n config BUSYBOX_DEFAULT_FEATURE_INSMOD_VERSION_CHECKING @@ -1369,6 +1405,9 @@ config BUSYBOX_DEFAULT_FEATURE_INSMOD_LOAD_MAP_FULL config BUSYBOX_DEFAULT_FEATURE_CHECK_TAINTED_MODULE bool default n +config BUSYBOX_DEFAULT_FEATURE_INSMOD_TRY_MMAP + bool + default n config BUSYBOX_DEFAULT_FEATURE_MODUTILS_ALIAS bool default n @@ -1399,12 +1438,18 @@ config BUSYBOX_DEFAULT_FEATURE_BLKID_TYPE config BUSYBOX_DEFAULT_BLOCKDEV bool default n +config BUSYBOX_DEFAULT_CAL + bool + default n config BUSYBOX_DEFAULT_DMESG bool default y config BUSYBOX_DEFAULT_FEATURE_DMESG_PRETTY bool default y +config BUSYBOX_DEFAULT_FALLOCATE + bool + default n config BUSYBOX_DEFAULT_FATATTR bool default n @@ -1462,6 +1507,9 @@ config BUSYBOX_DEFAULT_FREERAMDISK config BUSYBOX_DEFAULT_FSCK_MINIX bool default n +config BUSYBOX_DEFAULT_FSFREEZE + bool + default n config BUSYBOX_DEFAULT_FSTRIM bool default n @@ -1480,6 +1528,9 @@ config BUSYBOX_DEFAULT_FEATURE_HEXDUMP_REVERSE config BUSYBOX_DEFAULT_HD bool default n +config BUSYBOX_DEFAULT_XXD + bool + default n config BUSYBOX_DEFAULT_HWCLOCK bool default y @@ -1621,6 +1672,9 @@ config BUSYBOX_DEFAULT_LINUX32 config BUSYBOX_DEFAULT_LINUX64 bool default n +config BUSYBOX_DEFAULT_SETPRIV + bool + default n config BUSYBOX_DEFAULT_SWAPON bool default n @@ -1918,6 +1972,9 @@ config BUSYBOX_DEFAULT_FEATURE_LESS_LINENUMS config BUSYBOX_DEFAULT_LOCK bool default y +config BUSYBOX_DEFAULT_LSSCSI + bool + default n config BUSYBOX_DEFAULT_MAKEDEVS bool default n @@ -1945,6 +2002,9 @@ config BUSYBOX_DEFAULT_NANDWRITE config BUSYBOX_DEFAULT_NANDDUMP bool default n +config BUSYBOX_DEFAULT_PARTPROBE + bool + default n config BUSYBOX_DEFAULT_RAIDAUTORUN bool default n @@ -2275,6 +2335,9 @@ config BUSYBOX_DEFAULT_NSLOOKUP config BUSYBOX_DEFAULT_NSLOOKUP_LEDE bool default y +config BUSYBOX_DEFAULT_FEATURE_NSLOOKUP_LEDE_LONG_OPTIONS + bool + default n config BUSYBOX_DEFAULT_NTPD bool default y @@ -2302,6 +2365,9 @@ config BUSYBOX_DEFAULT_ROUTE config BUSYBOX_DEFAULT_SLATTACH bool default n +config BUSYBOX_DEFAULT_SSL_CLIENT + bool + default n config BUSYBOX_DEFAULT_TCPSVD bool default n @@ -2317,6 +2383,9 @@ config BUSYBOX_DEFAULT_FEATURE_TELNET_TTYPE config BUSYBOX_DEFAULT_FEATURE_TELNET_AUTOLOGIN bool default n +config BUSYBOX_DEFAULT_FEATURE_TELNET_WIDTH + bool + default n config BUSYBOX_DEFAULT_TELNETD bool default n @@ -2347,6 +2416,9 @@ config BUSYBOX_DEFAULT_FEATURE_TFTP_PROGRESS_BAR config BUSYBOX_DEFAULT_TFTP_DEBUG bool default n +config BUSYBOX_DEFAULT_TLS + bool + default n config BUSYBOX_DEFAULT_TRACEROUTE bool default y @@ -2383,10 +2455,10 @@ config BUSYBOX_DEFAULT_FEATURE_WGET_LONG_OPTIONS config BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT bool default n -config BUSYBOX_DEFAULT_FEATURE_WGET_OPENSSL +config BUSYBOX_DEFAULT_FEATURE_WGET_HTTPS bool default n -config BUSYBOX_DEFAULT_FEATURE_WGET_SSL_HELPER +config BUSYBOX_DEFAULT_FEATURE_WGET_OPENSSL bool default n config BUSYBOX_DEFAULT_WHOIS @@ -2398,13 +2470,16 @@ config BUSYBOX_DEFAULT_ZCIP config BUSYBOX_DEFAULT_UDHCPC6 bool default n -config BUSYBOX_DEFAULT_UDHCPD +config BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC3646 bool default n -config BUSYBOX_DEFAULT_DHCPRELAY +config BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC4704 bool default n -config BUSYBOX_DEFAULT_DUMPLEASES +config BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC4833 + bool + default n +config BUSYBOX_DEFAULT_UDHCPD bool default n config BUSYBOX_DEFAULT_FEATURE_UDHCPD_WRITE_LEASES_EARLY @@ -2416,6 +2491,12 @@ config BUSYBOX_DEFAULT_FEATURE_UDHCPD_BASE_IP_ON_MAC config BUSYBOX_DEFAULT_DHCPD_LEASES_FILE string default "" +config BUSYBOX_DEFAULT_DUMPLEASES + bool + default n +config BUSYBOX_DEFAULT_DHCPRELAY + bool + default n config BUSYBOX_DEFAULT_UDHCPC bool default y @@ -2524,6 +2605,9 @@ config BUSYBOX_DEFAULT_PMAP config BUSYBOX_DEFAULT_POWERTOP bool default n +config BUSYBOX_DEFAULT_FEATURE_POWERTOP_INTERACTIVE + bool + default n config BUSYBOX_DEFAULT_PS bool default y @@ -2560,6 +2644,9 @@ config BUSYBOX_DEFAULT_BB_SYSCTL config BUSYBOX_DEFAULT_TOP bool default y +config BUSYBOX_DEFAULT_FEATURE_TOP_INTERACTIVE + bool + default n config BUSYBOX_DEFAULT_FEATURE_TOP_CPU_USAGE_PERCENTAGE bool default y @@ -2698,45 +2785,45 @@ config BUSYBOX_DEFAULT_ASH_OPTIMIZE_FOR_SIZE config BUSYBOX_DEFAULT_ASH_INTERNAL_GLOB bool default y -config BUSYBOX_DEFAULT_ASH_RANDOM_SUPPORT - bool - default n -config BUSYBOX_DEFAULT_ASH_EXPAND_PRMT - bool - default y config BUSYBOX_DEFAULT_ASH_BASH_COMPAT bool default y -config BUSYBOX_DEFAULT_ASH_IDLE_TIMEOUT - bool - default n config BUSYBOX_DEFAULT_ASH_JOB_CONTROL bool default y config BUSYBOX_DEFAULT_ASH_ALIAS bool default y -config BUSYBOX_DEFAULT_ASH_GETOPTS +config BUSYBOX_DEFAULT_ASH_RANDOM_SUPPORT + bool + default n +config BUSYBOX_DEFAULT_ASH_EXPAND_PRMT bool default y -config BUSYBOX_DEFAULT_ASH_BUILTIN_ECHO +config BUSYBOX_DEFAULT_ASH_IDLE_TIMEOUT + bool + default n +config BUSYBOX_DEFAULT_ASH_MAIL + bool + default n +config BUSYBOX_DEFAULT_ASH_ECHO bool default y -config BUSYBOX_DEFAULT_ASH_BUILTIN_PRINTF +config BUSYBOX_DEFAULT_ASH_PRINTF bool default y -config BUSYBOX_DEFAULT_ASH_BUILTIN_TEST +config BUSYBOX_DEFAULT_ASH_TEST bool default y config BUSYBOX_DEFAULT_ASH_HELP bool default n -config BUSYBOX_DEFAULT_ASH_CMDCMD +config BUSYBOX_DEFAULT_ASH_GETOPTS bool default y -config BUSYBOX_DEFAULT_ASH_MAIL +config BUSYBOX_DEFAULT_ASH_CMDCMD bool - default n + default y config BUSYBOX_DEFAULT_CTTYHACK bool default n @@ -2782,10 +2869,52 @@ config BUSYBOX_DEFAULT_HUSH_LOCAL config BUSYBOX_DEFAULT_HUSH_RANDOM_SUPPORT bool default n +config BUSYBOX_DEFAULT_HUSH_MODE_X + bool + default n +config BUSYBOX_DEFAULT_HUSH_ECHO + bool + default n +config BUSYBOX_DEFAULT_HUSH_PRINTF + bool + default n +config BUSYBOX_DEFAULT_HUSH_TEST + bool + default n +config BUSYBOX_DEFAULT_HUSH_EXPORT + bool + default n config BUSYBOX_DEFAULT_HUSH_EXPORT_N bool default n -config BUSYBOX_DEFAULT_HUSH_MODE_X +config BUSYBOX_DEFAULT_HUSH_KILL + bool + default n +config BUSYBOX_DEFAULT_HUSH_WAIT + bool + default n +config BUSYBOX_DEFAULT_HUSH_TRAP + bool + default n +config BUSYBOX_DEFAULT_HUSH_TYPE + bool + default n +config BUSYBOX_DEFAULT_HUSH_READ + bool + default n +config BUSYBOX_DEFAULT_HUSH_SET + bool + default n +config BUSYBOX_DEFAULT_HUSH_UNSET + bool + default n +config BUSYBOX_DEFAULT_HUSH_ULIMIT + bool + default n +config BUSYBOX_DEFAULT_HUSH_UMASK + bool + default n +config BUSYBOX_DEFAULT_HUSH_MEMLEAK bool default n config BUSYBOX_DEFAULT_MSH diff --git a/package/utils/busybox/Makefile b/package/utils/busybox/Makefile index ebc824e4351f..941e82835466 100644 --- a/package/utils/busybox/Makefile +++ b/package/utils/busybox/Makefile @@ -8,14 +8,14 @@ include $(TOPDIR)/rules.mk PKG_NAME:=busybox -PKG_VERSION:=1.26.2 -PKG_RELEASE:=7 +PKG_VERSION:=1.27.2 +PKG_RELEASE:=1 PKG_FLAGS:=essential PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 PKG_SOURCE_URL:=https://www.busybox.net/downloads \ http://sources.buildroot.net -PKG_HASH:=da3e44913fc1a9c9b7c5337ea5292da518683cbff32be630777f565d6036af16 +PKG_HASH:=9d4be516b61e6480f156b11eb42577a13529f75d3383850bb75c50c285de63df PKG_BUILD_DEPENDS:=BUSYBOX_USE_LIBRPC:librpc BUSYBOX_CONFIG_PAM:libpam PKG_BUILD_PARALLEL:=1 diff --git a/package/utils/busybox/config/Config.in b/package/utils/busybox/config/Config.in index 3ee3aa2f47b8..c66aa08e7395 100644 --- a/package/utils/busybox/config/Config.in +++ b/package/utils/busybox/config/Config.in @@ -32,6 +32,19 @@ config BUSYBOX_CONFIG_EXTRA_COMPAT some GNU extensions in libc. You probably only need this option if you plan to run busybox on desktop. +config BUSYBOX_CONFIG_FEDORA_COMPAT + bool "Building for Fedora distribution" + default BUSYBOX_DEFAULT_FEDORA_COMPAT + help + This option makes some tools behave like they do on Fedora. + + At the time of this writing (2017-08) this only affects uname: + normally, uname -p (processor) and uname -i (platform) + are shown as "unknown", but with this option uname -p + shows the same string as uname -m (machine type), + and so does uname -i unless machine type is i486/i586/i686 - + then uname -i shows "i386". + config BUSYBOX_CONFIG_INCLUDE_SUSv2 bool "Enable obsolete features removed before SUSv3" default BUSYBOX_DEFAULT_INCLUDE_SUSv2 @@ -49,17 +62,6 @@ config BUSYBOX_CONFIG_USE_PORTABLE_CODE compiler other than gcc. If you do use gcc, this option may needlessly increase code size. -config BUSYBOX_CONFIG_PLATFORM_LINUX - bool "Enable Linux-specific applets and features" - default BUSYBOX_DEFAULT_PLATFORM_LINUX - help - For the most part, busybox requires only POSIX compatibility - from the target system, but some applets and features use - Linux-specific interfaces. - - Answering 'N' here will disable such applets and hide the - corresponding configuration options. - config BUSYBOX_CONFIG_SHOW_USAGE bool "Show applet usage messages" default BUSYBOX_DEFAULT_SHOW_USAGE @@ -123,14 +125,14 @@ config BUSYBOX_CONFIG_INSTALL_NO_USR never to /usr/bin or /usr/sbin. config BUSYBOX_CONFIG_PAM - bool "Support for PAM (Pluggable Authentication Modules)" + bool "Support PAM (Pluggable Authentication Modules)" default BUSYBOX_DEFAULT_PAM help Use PAM in some busybox applets (currently login and httpd) instead of direct access to password database. config BUSYBOX_CONFIG_LONG_OPTS - bool "Support for --long-options" + bool "Support --long-options" default BUSYBOX_DEFAULT_LONG_OPTS help Enable this if you want busybox applets to use the gnu --long-option @@ -197,7 +199,7 @@ config BUSYBOX_CONFIG_PID_FILE_PATH specify a pidfile path. config BUSYBOX_CONFIG_FEATURE_SUID - bool "Support for SUID/SGID handling" + bool "Support SUID/SGID handling" default BUSYBOX_DEFAULT_FEATURE_SUID help With this option you can install the busybox binary belonging @@ -337,6 +339,17 @@ config BUSYBOX_CONFIG_FEATURE_HAVE_RPC # This is automatically selected if any of enabled applets need it. # You do not need to select it manually. +config BUSYBOX_CONFIG_PLATFORM_LINUX + bool #No description makes it a hidden option + default BUSYBOX_DEFAULT_PLATFORM_LINUX + #help + # For the most part, busybox requires only POSIX compatibility + # from the target system, but some applets and features use + # Linux-specific interfaces. + # + # This is automatically selected if any applet or feature requires + # Linux-specific interfaces. You do not need to select it manually. + comment 'Build Options' config BUSYBOX_CONFIG_STATIC @@ -610,6 +623,8 @@ config BUSYBOX_CONFIG_DEBUG_SANITIZE catch bad memory accesses (e.g. buffer overflows), but will make the executable larger and slow down runtime a bit. + This adds -fsanitize=foo options to gcc command line. + If you aren't developing/testing busybox, say N here. config BUSYBOX_CONFIG_UNIT_TEST @@ -624,7 +639,7 @@ config BUSYBOX_CONFIG_WERROR bool "Abort compilation on any warning" default BUSYBOX_DEFAULT_WERROR help - Selecting this will add -Werror to gcc command line. + This adds -Werror to gcc command line. Most people should answer N. diff --git a/package/utils/busybox/config/archival/Config.in b/package/utils/busybox/config/archival/Config.in index cf47e6591b09..ccfb828a8456 100644 --- a/package/utils/busybox/config/archival/Config.in +++ b/package/utils/busybox/config/archival/Config.in @@ -9,32 +9,22 @@ menu "Archival Utilities" config BUSYBOX_CONFIG_FEATURE_SEAMLESS_XZ bool "Make tar, rpm, modprobe etc understand .xz data" default BUSYBOX_DEFAULT_FEATURE_SEAMLESS_XZ - help - Make tar, rpm, modprobe etc understand .xz data. config BUSYBOX_CONFIG_FEATURE_SEAMLESS_LZMA bool "Make tar, rpm, modprobe etc understand .lzma data" default BUSYBOX_DEFAULT_FEATURE_SEAMLESS_LZMA - help - Make tar, rpm, modprobe etc understand .lzma data. config BUSYBOX_CONFIG_FEATURE_SEAMLESS_BZ2 bool "Make tar, rpm, modprobe etc understand .bz2 data" default BUSYBOX_DEFAULT_FEATURE_SEAMLESS_BZ2 - help - Make tar, rpm, modprobe etc understand .bz2 data. config BUSYBOX_CONFIG_FEATURE_SEAMLESS_GZ bool "Make tar, rpm, modprobe etc understand .gz data" default BUSYBOX_DEFAULT_FEATURE_SEAMLESS_GZ - help - Make tar, rpm, modprobe etc understand .gz data. config BUSYBOX_CONFIG_FEATURE_SEAMLESS_Z bool "Make tar, rpm, modprobe etc understand .Z data" default BUSYBOX_DEFAULT_FEATURE_SEAMLESS_Z # it is ancient - help - Make tar, rpm, modprobe etc understand .Z data. config BUSYBOX_CONFIG_AR bool "ar" @@ -50,7 +40,7 @@ config BUSYBOX_CONFIG_AR probably say N here: most compilers come with their own ar utility. config BUSYBOX_CONFIG_FEATURE_AR_LONG_FILENAMES - bool "Support for long filenames (not needed for debs)" + bool "Support long filenames (not needed for debs)" default BUSYBOX_DEFAULT_FEATURE_AR_LONG_FILENAMES depends on BUSYBOX_CONFIG_AR help @@ -74,6 +64,7 @@ config BUSYBOX_CONFIG_UNCOMPRESS config BUSYBOX_CONFIG_GUNZIP bool "gunzip" default BUSYBOX_DEFAULT_GUNZIP + select BUSYBOX_CONFIG_FEATURE_GZIP_DECOMPRESS help gunzip is used to decompress archives created by gzip. You can use the `-t' option to test the integrity of @@ -82,6 +73,7 @@ config BUSYBOX_CONFIG_GUNZIP config BUSYBOX_CONFIG_ZCAT bool "zcat" default BUSYBOX_DEFAULT_ZCAT + select BUSYBOX_CONFIG_FEATURE_GZIP_DECOMPRESS help Alias to "gunzip -c". @@ -89,11 +81,10 @@ config BUSYBOX_CONFIG_FEATURE_GUNZIP_LONG_OPTIONS bool "Enable long options" default BUSYBOX_DEFAULT_FEATURE_GUNZIP_LONG_OPTIONS depends on (BUSYBOX_CONFIG_GUNZIP || BUSYBOX_CONFIG_ZCAT) && BUSYBOX_CONFIG_LONG_OPTS - help - Enable use of long options. config BUSYBOX_CONFIG_BUNZIP2 bool "bunzip2" default BUSYBOX_DEFAULT_BUNZIP2 + select BUSYBOX_CONFIG_FEATURE_BZIP2_DECOMPRESS help bunzip2 is a compression utility using the Burrows-Wheeler block sorting text compression algorithm, and Huffman coding. Compression @@ -107,6 +98,7 @@ config BUSYBOX_CONFIG_BUNZIP2 config BUSYBOX_CONFIG_BZCAT bool "bzcat" default BUSYBOX_DEFAULT_BZCAT + select BUSYBOX_CONFIG_FEATURE_BZIP2_DECOMPRESS help Alias to "bunzip2 -c". config BUSYBOX_CONFIG_UNLZMA @@ -141,7 +133,7 @@ config BUSYBOX_CONFIG_LZMA IOW: you'll get lzma applet, but it will always require -d option. config BUSYBOX_CONFIG_FEATURE_LZMA_FAST - bool "Optimize unlzma for speed" + bool "Optimize for speed" default BUSYBOX_DEFAULT_FEATURE_LZMA_FAST depends on BUSYBOX_CONFIG_UNLZMA || BUSYBOX_CONFIG_LZCAT || BUSYBOX_CONFIG_LZMA help @@ -177,6 +169,15 @@ config BUSYBOX_CONFIG_BZIP2 Unless you have a specific application which requires bzip2, you should probably say N here. + +config BUSYBOX_CONFIG_FEATURE_BZIP2_DECOMPRESS + bool "Enable decompression" + default BUSYBOX_DEFAULT_FEATURE_BZIP2_DECOMPRESS + depends on BUSYBOX_CONFIG_BZIP2 || BUSYBOX_CONFIG_BUNZIP2 || BUSYBOX_CONFIG_BZCAT + help + Enable -d (--decompress) and -t (--test) options for bzip2. + This will be automatically selected if bunzip2 or bzcat is + enabled. config BUSYBOX_CONFIG_CPIO bool "cpio" default BUSYBOX_DEFAULT_CPIO @@ -192,7 +193,7 @@ config BUSYBOX_CONFIG_CPIO should probably say N here. config BUSYBOX_CONFIG_FEATURE_CPIO_O - bool "Support for archive creation" + bool "Support archive creation" default BUSYBOX_DEFAULT_FEATURE_CPIO_O depends on BUSYBOX_CONFIG_CPIO help @@ -200,7 +201,7 @@ config BUSYBOX_CONFIG_FEATURE_CPIO_O format only. config BUSYBOX_CONFIG_FEATURE_CPIO_P - bool "Support for passthrough mode" + bool "Support passthrough mode" default BUSYBOX_DEFAULT_FEATURE_CPIO_P depends on BUSYBOX_CONFIG_FEATURE_CPIO_O help @@ -237,11 +238,9 @@ config BUSYBOX_CONFIG_FEATURE_GZIP_LONG_OPTIONS bool "Enable long options" default BUSYBOX_DEFAULT_FEATURE_GZIP_LONG_OPTIONS depends on BUSYBOX_CONFIG_GZIP && BUSYBOX_CONFIG_LONG_OPTS - help - Enable use of long options, increases size by about 106 Bytes config BUSYBOX_CONFIG_GZIP_FAST - int "Trade memory for gzip speed (0:small,slow - 2:fast,big)" + int "Trade memory for speed (0:small,slow - 2:fast,big)" default BUSYBOX_DEFAULT_GZIP_FAST range 0 2 depends on BUSYBOX_CONFIG_GZIP @@ -261,6 +260,15 @@ config BUSYBOX_CONFIG_FEATURE_GZIP_LEVELS is 6. If levels 1-3 are specified, 4 is used. If this option is not selected, -N options are ignored and -9 is used. + +config BUSYBOX_CONFIG_FEATURE_GZIP_DECOMPRESS + bool "Enable decompression" + default BUSYBOX_DEFAULT_FEATURE_GZIP_DECOMPRESS + depends on BUSYBOX_CONFIG_GZIP || BUSYBOX_CONFIG_GUNZIP || BUSYBOX_CONFIG_ZCAT + help + Enable -d (--decompress) and -t (--test) options for gzip. + This will be automatically selected if gunzip or zcat is + enabled. config BUSYBOX_CONFIG_LZOP bool "lzop" default BUSYBOX_DEFAULT_LZOP @@ -269,13 +277,13 @@ config BUSYBOX_CONFIG_LZOP config BUSYBOX_CONFIG_UNLZOP bool "unlzop" - default BUSYBOX_DEFAULT_UNLZOP + default BUSYBOX_DEFAULT_UNLZOP # INCOMPAT: upstream lzop does not provide such tool help Lzop decompresion. config BUSYBOX_CONFIG_LZOPCAT bool "lzopcat" - default BUSYBOX_DEFAULT_LZOPCAT + default BUSYBOX_DEFAULT_LZOPCAT # INCOMPAT: upstream lzop does not provide such tool help Alias to "unlzop -c". @@ -305,13 +313,15 @@ config BUSYBOX_CONFIG_TAR create compressed archives. It's probably the most widely used UNIX archive program. +config BUSYBOX_CONFIG_FEATURE_TAR_LONG_OPTIONS + bool "Enable long options" + default BUSYBOX_DEFAULT_FEATURE_TAR_LONG_OPTIONS + depends on BUSYBOX_CONFIG_TAR && BUSYBOX_CONFIG_LONG_OPTS + config BUSYBOX_CONFIG_FEATURE_TAR_CREATE - bool "Enable archive creation" + bool "Enable -c (archive creation)" default BUSYBOX_DEFAULT_FEATURE_TAR_CREATE depends on BUSYBOX_CONFIG_TAR - help - If you enable this option you'll be able to create - tar archives using the `-c' option. config BUSYBOX_CONFIG_FEATURE_TAR_AUTODETECT bool "Autodetect compressed tarballs" @@ -330,7 +340,7 @@ config BUSYBOX_CONFIG_FEATURE_TAR_FROM a list of files to include or exclude from an archive. config BUSYBOX_CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY - bool "Support for old tar header format" + bool "Support old tar header format" default BUSYBOX_DEFAULT_FEATURE_TAR_OLDGNU_COMPATIBILITY depends on BUSYBOX_CONFIG_TAR || BUSYBOX_CONFIG_DPKG help @@ -349,22 +359,12 @@ config BUSYBOX_CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY tarballs still exist. config BUSYBOX_CONFIG_FEATURE_TAR_GNU_EXTENSIONS - bool "Support for GNU tar extensions (long filenames)" + bool "Support GNU tar extensions (long filenames)" default BUSYBOX_DEFAULT_FEATURE_TAR_GNU_EXTENSIONS depends on BUSYBOX_CONFIG_TAR || BUSYBOX_CONFIG_DPKG - help - With this option busybox supports GNU long filenames and - linknames. - -config BUSYBOX_CONFIG_FEATURE_TAR_LONG_OPTIONS - bool "Enable long options" - default BUSYBOX_DEFAULT_FEATURE_TAR_LONG_OPTIONS - depends on BUSYBOX_CONFIG_TAR && BUSYBOX_CONFIG_LONG_OPTS - help - Enable use of long options, increases size by about 400 Bytes config BUSYBOX_CONFIG_FEATURE_TAR_TO_COMMAND - bool "Support for writing to an external program" + bool "Support writing to an external program (--to-command)" default BUSYBOX_DEFAULT_FEATURE_TAR_TO_COMMAND depends on BUSYBOX_CONFIG_TAR && BUSYBOX_CONFIG_FEATURE_TAR_LONG_OPTIONS help @@ -377,20 +377,17 @@ config BUSYBOX_CONFIG_FEATURE_TAR_UNAME_GNAME default BUSYBOX_DEFAULT_FEATURE_TAR_UNAME_GNAME depends on BUSYBOX_CONFIG_TAR help - Enables use of user and group names in tar. This affects contents + Enable use of user and group names in tar. This affects contents listings (-t) and preserving permissions when unpacking (-p). +200 bytes. config BUSYBOX_CONFIG_FEATURE_TAR_NOPRESERVE_TIME - bool "Enable -m (do not preserve time) option" + bool "Enable -m (do not preserve time) GNU option" default BUSYBOX_DEFAULT_FEATURE_TAR_NOPRESERVE_TIME depends on BUSYBOX_CONFIG_TAR - help - With this option busybox supports GNU tar -m - (do not preserve time) option. config BUSYBOX_CONFIG_FEATURE_TAR_SELINUX - bool "Support for extracting SELinux labels" + bool "Support extracting SELinux labels" default BUSYBOX_DEFAULT_FEATURE_TAR_SELINUX depends on BUSYBOX_CONFIG_TAR && BUSYBOX_CONFIG_SELINUX help @@ -403,7 +400,31 @@ config BUSYBOX_CONFIG_UNZIP unzip will list or extract files from a ZIP archive, commonly found on DOS/WIN systems. The default behavior (with no options) is to extract the archive into the - current directory. Use the `-d' option to extract to a - directory of your choice. + current directory. + +config BUSYBOX_CONFIG_FEATURE_UNZIP_CDF + bool "Read and use Central Directory data" + default BUSYBOX_DEFAULT_FEATURE_UNZIP_CDF + depends on BUSYBOX_CONFIG_UNZIP + help + If you know that you only need to deal with simple + ZIP files without deleted/updated files, SFX archives etc, + you can reduce code size by unselecting this option. + To support less trivial ZIPs, say Y. + +config BUSYBOX_CONFIG_FEATURE_UNZIP_BZIP2 + bool "Support compression method 12 (bzip2)" + default BUSYBOX_DEFAULT_FEATURE_UNZIP_BZIP2 + depends on BUSYBOX_CONFIG_FEATURE_UNZIP_CDF && BUSYBOX_CONFIG_DESKTOP + +config BUSYBOX_CONFIG_FEATURE_UNZIP_LZMA + bool "Support compression method 14 (lzma)" + default BUSYBOX_DEFAULT_FEATURE_UNZIP_LZMA + depends on BUSYBOX_CONFIG_FEATURE_UNZIP_CDF && BUSYBOX_CONFIG_DESKTOP + +config BUSYBOX_CONFIG_FEATURE_UNZIP_XZ + bool "Support compression method 95 (xz)" + default BUSYBOX_DEFAULT_FEATURE_UNZIP_XZ + depends on BUSYBOX_CONFIG_FEATURE_UNZIP_CDF && BUSYBOX_CONFIG_DESKTOP endmenu diff --git a/package/utils/busybox/config/console-tools/Config.in b/package/utils/busybox/config/console-tools/Config.in index e5a4bfbeaf10..dcc19a567deb 100644 --- a/package/utils/busybox/config/console-tools/Config.in +++ b/package/utils/busybox/config/console-tools/Config.in @@ -76,18 +76,14 @@ comment "Common options for loadfont and setfont" depends on BUSYBOX_CONFIG_LOADFONT || BUSYBOX_CONFIG_SETFONT config BUSYBOX_CONFIG_FEATURE_LOADFONT_PSF2 - bool "Support for PSF2 console fonts" + bool "Support PSF2 console fonts" default BUSYBOX_DEFAULT_FEATURE_LOADFONT_PSF2 depends on BUSYBOX_CONFIG_LOADFONT || BUSYBOX_CONFIG_SETFONT - help - Support PSF2 console fonts. config BUSYBOX_CONFIG_FEATURE_LOADFONT_RAW - bool "Support for old (raw) console fonts" + bool "Support old (raw) console fonts" default BUSYBOX_DEFAULT_FEATURE_LOADFONT_RAW depends on BUSYBOX_CONFIG_LOADFONT || BUSYBOX_CONFIG_SETFONT - help - Support old (raw) console fonts. config BUSYBOX_CONFIG_LOADKMAP bool "loadkmap" default BUSYBOX_DEFAULT_LOADKMAP @@ -136,8 +132,6 @@ config BUSYBOX_CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS bool "Enable long options" default BUSYBOX_DEFAULT_FEATURE_SETCONSOLE_LONG_OPTIONS depends on BUSYBOX_CONFIG_SETCONSOLE && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the setconsole applet. config BUSYBOX_CONFIG_SETKEYCODES bool "setkeycodes" default BUSYBOX_DEFAULT_SETKEYCODES diff --git a/package/utils/busybox/config/coreutils/Config.in b/package/utils/busybox/config/coreutils/Config.in index 855bcd1b4408..c4ef1f4fb713 100644 --- a/package/utils/busybox/config/coreutils/Config.in +++ b/package/utils/busybox/config/coreutils/Config.in @@ -13,23 +13,19 @@ config BUSYBOX_CONFIG_BASENAME basename is used to strip the directory and suffix from filenames, leaving just the filename itself. Enable this option if you wish to enable the 'basename' utility. -config BUSYBOX_CONFIG_CAL - bool "cal" - default BUSYBOX_DEFAULT_CAL - help - cal is used to display a monthly calendar. config BUSYBOX_CONFIG_CAT bool "cat" default BUSYBOX_DEFAULT_CAT help cat is used to concatenate files and print them to the standard output. Enable this option if you wish to enable the 'cat' utility. -config BUSYBOX_CONFIG_CATV - bool "catv" - default BUSYBOX_DEFAULT_CATV + +config BUSYBOX_CONFIG_FEATURE_CATV + bool "cat -v[etA]" + default BUSYBOX_DEFAULT_FEATURE_CATV + depends on BUSYBOX_CONFIG_CAT help - Display nonprinting characters as escape sequences (like some - implementations' cat -v option). + Display nonprinting characters as escape sequences config BUSYBOX_CONFIG_CHGRP bool "chgrp" default BUSYBOX_DEFAULT_CHGRP @@ -51,8 +47,6 @@ config BUSYBOX_CONFIG_FEATURE_CHOWN_LONG_OPTIONS bool "Enable long options" default BUSYBOX_DEFAULT_FEATURE_CHOWN_LONG_OPTIONS depends on BUSYBOX_CONFIG_CHOWN && BUSYBOX_CONFIG_LONG_OPTS - help - Enable use of long options config BUSYBOX_CONFIG_CHROOT bool "chroot" default BUSYBOX_DEFAULT_CHROOT @@ -77,11 +71,11 @@ config BUSYBOX_CONFIG_CP cp is used to copy files and directories. config BUSYBOX_CONFIG_FEATURE_CP_LONG_OPTIONS - bool "Enable long options for cp" + bool "Enable long options" default BUSYBOX_DEFAULT_FEATURE_CP_LONG_OPTIONS depends on BUSYBOX_CONFIG_CP && BUSYBOX_CONFIG_LONG_OPTS help - Enable long options for cp. + Enable long options. Also add support for --parents option. config BUSYBOX_CONFIG_CUT bool "cut" @@ -163,7 +157,7 @@ config BUSYBOX_CONFIG_FEATURE_DD_IBS_OBS default BUSYBOX_DEFAULT_FEATURE_DD_IBS_OBS depends on BUSYBOX_CONFIG_DD help - Enables support for writing a certain number of bytes in and out, + Enable support for writing a certain number of bytes in and out, at a time, and performing conversions on the data stream. config BUSYBOX_CONFIG_FEATURE_DD_STATUS @@ -171,7 +165,7 @@ config BUSYBOX_CONFIG_FEATURE_DD_STATUS default BUSYBOX_DEFAULT_FEATURE_DD_STATUS depends on BUSYBOX_CONFIG_DD help - Enables support for status=noxfer/none option. + Enable support for status=noxfer/none option. config BUSYBOX_CONFIG_DF bool "df" default BUSYBOX_DEFAULT_DF @@ -184,11 +178,9 @@ config BUSYBOX_CONFIG_FEATURE_DF_FANCY default BUSYBOX_DEFAULT_FEATURE_DF_FANCY depends on BUSYBOX_CONFIG_DF help - This option enables -a, -i and -B. - - -a Show all filesystems - -i Inodes - -B Blocksize + -a Show all filesystems + -i Inodes + -B Blocksize config BUSYBOX_CONFIG_DIRNAME bool "dirname" default BUSYBOX_DEFAULT_DIRNAME @@ -229,11 +221,9 @@ config BUSYBOX_CONFIG_ECHO # this entry also appears in shell/Config.in, next to the echo builtin config BUSYBOX_CONFIG_FEATURE_FANCY_ECHO - bool "Enable echo options (-n and -e)" + bool "Enable -n and -e options" default BUSYBOX_DEFAULT_FEATURE_FANCY_ECHO - depends on BUSYBOX_CONFIG_ECHO || BUSYBOX_CONFIG_ASH_BUILTIN_ECHO || BUSYBOX_CONFIG_HUSH - help - This adds options (-n and -e) to echo. + depends on BUSYBOX_CONFIG_ECHO || BUSYBOX_CONFIG_ASH_ECHO || BUSYBOX_CONFIG_HUSH_ECHO config BUSYBOX_CONFIG_ENV bool "env" default BUSYBOX_DEFAULT_ENV @@ -246,8 +236,6 @@ config BUSYBOX_CONFIG_FEATURE_ENV_LONG_OPTIONS bool "Enable long options" default BUSYBOX_DEFAULT_FEATURE_ENV_LONG_OPTIONS depends on BUSYBOX_CONFIG_ENV && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the env applet. config BUSYBOX_CONFIG_EXPAND bool "expand" default BUSYBOX_DEFAULT_EXPAND @@ -258,8 +246,6 @@ config BUSYBOX_CONFIG_FEATURE_EXPAND_LONG_OPTIONS bool "Enable long options" default BUSYBOX_DEFAULT_FEATURE_EXPAND_LONG_OPTIONS depends on BUSYBOX_CONFIG_EXPAND && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the expand applet. config BUSYBOX_CONFIG_UNEXPAND bool "unexpand" @@ -271,8 +257,6 @@ config BUSYBOX_CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS bool "Enable long options" default BUSYBOX_DEFAULT_FEATURE_UNEXPAND_LONG_OPTIONS depends on BUSYBOX_CONFIG_UNEXPAND && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the unexpand applet. config BUSYBOX_CONFIG_EXPR bool "expr" default BUSYBOX_DEFAULT_EXPR @@ -288,6 +272,11 @@ config BUSYBOX_CONFIG_EXPR_MATH_SUPPORT_64 Enable 64-bit math support in the expr applet. This will make the applet slightly larger, but will allow computation with very large numbers. +config BUSYBOX_CONFIG_FACTOR + bool "factor" + default BUSYBOX_DEFAULT_FACTOR + help + factor factorizes integers config BUSYBOX_CONFIG_FALSE bool "false" default BUSYBOX_DEFAULT_FALSE @@ -311,11 +300,9 @@ config BUSYBOX_CONFIG_HEAD from files. config BUSYBOX_CONFIG_FEATURE_FANCY_HEAD - bool "Enable head options (-c, -q, and -v)" + bool "Enable -c, -q, and -v" default BUSYBOX_DEFAULT_FEATURE_FANCY_HEAD depends on BUSYBOX_CONFIG_HEAD - help - This enables the head options (-c, -q, and -v). config BUSYBOX_CONFIG_HOSTID bool "hostid" default BUSYBOX_DEFAULT_HOSTID @@ -343,8 +330,11 @@ config BUSYBOX_CONFIG_FEATURE_INSTALL_LONG_OPTIONS bool "Enable long options" default BUSYBOX_DEFAULT_FEATURE_INSTALL_LONG_OPTIONS depends on BUSYBOX_CONFIG_INSTALL && BUSYBOX_CONFIG_LONG_OPTS +config BUSYBOX_CONFIG_LINK + bool "link" + default BUSYBOX_DEFAULT_LINK help - Support long options for the install applet. + link creates hard links between files. config BUSYBOX_CONFIG_LN bool "ln" default BUSYBOX_DEFAULT_LN @@ -365,22 +355,21 @@ config BUSYBOX_CONFIG_FEATURE_LS_FILETYPES bool "Enable filetyping options (-p and -F)" default BUSYBOX_DEFAULT_FEATURE_LS_FILETYPES depends on BUSYBOX_CONFIG_LS - help - Enable the ls options (-p and -F). config BUSYBOX_CONFIG_FEATURE_LS_FOLLOWLINKS bool "Enable symlinks dereferencing (-L)" default BUSYBOX_DEFAULT_FEATURE_LS_FOLLOWLINKS depends on BUSYBOX_CONFIG_LS - help - Enable the ls option (-L). config BUSYBOX_CONFIG_FEATURE_LS_RECURSIVE bool "Enable recursion (-R)" default BUSYBOX_DEFAULT_FEATURE_LS_RECURSIVE depends on BUSYBOX_CONFIG_LS - help - Enable the ls option (-R). + +config BUSYBOX_CONFIG_FEATURE_LS_WIDTH + bool "Enable -w WIDTH and window size autodetection" + default BUSYBOX_DEFAULT_FEATURE_LS_WIDTH + depends on BUSYBOX_CONFIG_LS config BUSYBOX_CONFIG_FEATURE_LS_SORTFILES bool "Sort the file names" @@ -460,7 +449,6 @@ config BUSYBOX_CONFIG_FEATURE_MD5_SHA1_SUM_CHECK help Enabling the -c options allows files to be checked against pre-calculated hash values. - -s and -w are useful options when verifying checksums. config BUSYBOX_CONFIG_MKDIR bool "mkdir" @@ -472,8 +460,6 @@ config BUSYBOX_CONFIG_FEATURE_MKDIR_LONG_OPTIONS bool "Enable long options" default BUSYBOX_DEFAULT_FEATURE_MKDIR_LONG_OPTIONS depends on BUSYBOX_CONFIG_MKDIR && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the mkdir applet. config BUSYBOX_CONFIG_MKFIFO bool "mkfifo" default BUSYBOX_DEFAULT_MKFIFO @@ -486,6 +472,11 @@ config BUSYBOX_CONFIG_MKNOD help mknod is used to create FIFOs or block/character special files with the specified names. +config BUSYBOX_CONFIG_MKTEMP + bool "mktemp" + default BUSYBOX_DEFAULT_MKTEMP + help + mktemp is used to create unique temporary files config BUSYBOX_CONFIG_MV bool "mv" default BUSYBOX_DEFAULT_MV @@ -496,23 +487,37 @@ config BUSYBOX_CONFIG_FEATURE_MV_LONG_OPTIONS bool "Enable long options" default BUSYBOX_DEFAULT_FEATURE_MV_LONG_OPTIONS depends on BUSYBOX_CONFIG_MV && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the mv applet. config BUSYBOX_CONFIG_NICE bool "nice" default BUSYBOX_DEFAULT_NICE help nice runs a program with modified scheduling priority. +config BUSYBOX_CONFIG_NL + bool "nl" + default BUSYBOX_DEFAULT_NL + help + nl is used to number lines of files. config BUSYBOX_CONFIG_NOHUP bool "nohup" default BUSYBOX_DEFAULT_NOHUP help run a command immune to hangups, with output to a non-tty. +config BUSYBOX_CONFIG_NPROC + bool "nproc" + default BUSYBOX_DEFAULT_NPROC + help + Print number of CPUs config BUSYBOX_CONFIG_OD bool "od" default BUSYBOX_DEFAULT_OD help od is used to dump binary files in octal and other formats. +config BUSYBOX_CONFIG_PASTE + bool "paste" + default BUSYBOX_DEFAULT_PASTE + help + paste is used to paste lines of different files together + and write the result to stdout config BUSYBOX_CONFIG_PRINTENV bool "printenv" default BUSYBOX_DEFAULT_PRINTENV @@ -571,6 +576,11 @@ config BUSYBOX_CONFIG_SEQ default BUSYBOX_DEFAULT_SEQ help print a sequence of numbers +config BUSYBOX_CONFIG_SHRED + bool "shred" + default BUSYBOX_DEFAULT_SHRED + help + Overwrite a file to hide its contents, and optionally delete it config BUSYBOX_CONFIG_SHUF bool "shuf" default BUSYBOX_DEFAULT_SHUF @@ -624,7 +634,7 @@ config BUSYBOX_CONFIG_SPLIT bool "split" default BUSYBOX_DEFAULT_SPLIT help - split a file into pieces. + Split a file into pieces. config BUSYBOX_CONFIG_FEATURE_SPLIT_FANCY bool "Fancy extensions" @@ -692,13 +702,12 @@ config BUSYBOX_CONFIG_TAIL from files. config BUSYBOX_CONFIG_FEATURE_FANCY_TAIL - bool "Enable extra tail options (-q, -s, -v, and -F)" + bool "Enable -q, -s, -v, and -F options" default BUSYBOX_DEFAULT_FEATURE_FANCY_TAIL depends on BUSYBOX_CONFIG_TAIL help - The options (-q, -s, -v and -F) are provided by GNU tail, but - are not specific in the SUSv3 standard. - + These options are provided by GNU tail, but + are not specific in the SUSv3 standard: -q Never output headers giving file names -s SEC Wait SEC seconds between reads with -f -v Always output headers giving file names @@ -739,9 +748,15 @@ config BUSYBOX_CONFIG_TEST2 config BUSYBOX_CONFIG_FEATURE_TEST_64 bool "Extend test to 64 bit" default BUSYBOX_DEFAULT_FEATURE_TEST_64 - depends on BUSYBOX_CONFIG_TEST || BUSYBOX_CONFIG_TEST1 || BUSYBOX_CONFIG_TEST2 || BUSYBOX_CONFIG_ASH_BUILTIN_TEST || BUSYBOX_CONFIG_HUSH + depends on BUSYBOX_CONFIG_TEST || BUSYBOX_CONFIG_TEST1 || BUSYBOX_CONFIG_TEST2 || BUSYBOX_CONFIG_ASH_TEST || BUSYBOX_CONFIG_HUSH_TEST help Enable 64-bit support in test. +config BUSYBOX_CONFIG_TIMEOUT + bool "timeout" + default BUSYBOX_DEFAULT_TIMEOUT + help + Runs a program and watches it. If it does not terminate in + specified number of seconds, it is sent a signal. config BUSYBOX_CONFIG_TOUCH bool "touch" default BUSYBOX_DEFAULT_TOUCH @@ -856,11 +871,11 @@ config BUSYBOX_CONFIG_WC in specified files. config BUSYBOX_CONFIG_FEATURE_WC_LARGE - bool "Support very large files in wc" + bool "Support very large counts" default BUSYBOX_DEFAULT_FEATURE_WC_LARGE depends on BUSYBOX_CONFIG_WC help - Use "unsigned long long" in wc for counter variables. + Use "unsigned long long" for counter variables. config BUSYBOX_CONFIG_WHO bool "who" default BUSYBOX_DEFAULT_WHO @@ -868,6 +883,13 @@ config BUSYBOX_CONFIG_WHO help who is used to show who is logged on. +config BUSYBOX_CONFIG_W + bool "w" + default BUSYBOX_DEFAULT_W + depends on BUSYBOX_CONFIG_FEATURE_UTMP + help + w is used to show who is logged on. + config BUSYBOX_CONFIG_USERS bool "users" default BUSYBOX_DEFAULT_USERS @@ -907,25 +929,11 @@ config BUSYBOX_CONFIG_FEATURE_PRESERVE_HARDLINKS help Allow cp and mv to preserve hard links. -comment "Common options for ls, more and telnet" - depends on BUSYBOX_CONFIG_LS || BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TELNET - -config BUSYBOX_CONFIG_FEATURE_AUTOWIDTH - bool "Calculate terminal & column widths" - default BUSYBOX_DEFAULT_FEATURE_AUTOWIDTH - depends on BUSYBOX_CONFIG_LS || BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TELNET - help - This option allows utilities such as 'ls', 'more' and 'telnet' - to determine the width of the screen, which can allow them to - display additional text or avoid wrapping text onto the next line. - If you leave this disabled, your utilities will be especially - primitive and will be unable to determine the current screen width. - comment "Common options for df, du, ls" depends on BUSYBOX_CONFIG_DF || BUSYBOX_CONFIG_DU || BUSYBOX_CONFIG_LS config BUSYBOX_CONFIG_FEATURE_HUMAN_READABLE - bool "Support for human readable output (example 13k, 23M, 235G)" + bool "Support human readable output (example 13k, 23M, 235G)" default BUSYBOX_DEFAULT_FEATURE_HUMAN_READABLE depends on BUSYBOX_CONFIG_DF || BUSYBOX_CONFIG_DU || BUSYBOX_CONFIG_LS help diff --git a/package/utils/busybox/config/debianutils/Config.in b/package/utils/busybox/config/debianutils/Config.in index d39c60f43e81..6b9de0de5607 100644 --- a/package/utils/busybox/config/debianutils/Config.in +++ b/package/utils/busybox/config/debianutils/Config.in @@ -6,11 +6,6 @@ menu "Debian Utilities" -config BUSYBOX_CONFIG_MKTEMP - bool "mktemp" - default BUSYBOX_DEFAULT_MKTEMP - help - mktemp is used to create unique temporary files config BUSYBOX_CONFIG_PIPE_PROGRESS bool "pipe_progress" default BUSYBOX_DEFAULT_PIPE_PROGRESS @@ -35,8 +30,6 @@ config BUSYBOX_CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS bool "Enable long options" default BUSYBOX_DEFAULT_FEATURE_RUN_PARTS_LONG_OPTIONS depends on BUSYBOX_CONFIG_RUN_PARTS && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the run-parts applet. config BUSYBOX_CONFIG_FEATURE_RUN_PARTS_FANCY bool "Support additional arguments" @@ -54,22 +47,19 @@ config BUSYBOX_CONFIG_START_STOP_DAEMON termination of system-level processes, usually the ones started during the startup of the system. +config BUSYBOX_CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS + bool "Enable long options" + default BUSYBOX_DEFAULT_FEATURE_START_STOP_DAEMON_LONG_OPTIONS + depends on BUSYBOX_CONFIG_START_STOP_DAEMON && BUSYBOX_CONFIG_LONG_OPTS + config BUSYBOX_CONFIG_FEATURE_START_STOP_DAEMON_FANCY bool "Support additional arguments" default BUSYBOX_DEFAULT_FEATURE_START_STOP_DAEMON_FANCY depends on BUSYBOX_CONFIG_START_STOP_DAEMON help - Support additional arguments. -o|--oknodo ignored since we exit with 0 anyway -v|--verbose -N|--nicelevel N - -config BUSYBOX_CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS - bool "Enable long options" - default BUSYBOX_DEFAULT_FEATURE_START_STOP_DAEMON_LONG_OPTIONS - depends on BUSYBOX_CONFIG_START_STOP_DAEMON && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the start-stop-daemon applet. config BUSYBOX_CONFIG_WHICH bool "which" default BUSYBOX_DEFAULT_WHICH diff --git a/package/utils/busybox/config/editors/Config.in b/package/utils/busybox/config/editors/Config.in index 6ae361f7ff70..da4eaedd7978 100644 --- a/package/utils/busybox/config/editors/Config.in +++ b/package/utils/busybox/config/editors/Config.in @@ -49,8 +49,6 @@ config BUSYBOX_CONFIG_FEATURE_DIFF_LONG_OPTIONS bool "Enable long options" default BUSYBOX_DEFAULT_FEATURE_DIFF_LONG_OPTIONS depends on BUSYBOX_CONFIG_DIFF && BUSYBOX_CONFIG_LONG_OPTS - help - Enable use of long options. config BUSYBOX_CONFIG_FEATURE_DIFF_DIR bool "Enable directory support" @@ -87,7 +85,7 @@ config BUSYBOX_CONFIG_VI you may wish to use something else. config BUSYBOX_CONFIG_FEATURE_VI_MAX_LEN - int "Maximum screen width in vi" + int "Maximum screen width" range 256 16384 default BUSYBOX_DEFAULT_FEATURE_VI_MAX_LEN depends on BUSYBOX_CONFIG_VI @@ -96,7 +94,7 @@ config BUSYBOX_CONFIG_FEATURE_VI_MAX_LEN Make it smaller than 4k only if you are very limited on memory. config BUSYBOX_CONFIG_FEATURE_VI_8BIT - bool "Allow vi to display 8-bit chars (otherwise shows dots)" + bool "Allow to display 8-bit chars (otherwise shows dots)" default BUSYBOX_DEFAULT_FEATURE_VI_8BIT depends on BUSYBOX_CONFIG_VI help @@ -110,7 +108,7 @@ config BUSYBOX_CONFIG_FEATURE_VI_COLON default BUSYBOX_DEFAULT_FEATURE_VI_COLON depends on BUSYBOX_CONFIG_VI help - Enable a limited set of colon commands for vi. This does not + Enable a limited set of colon commands. This does not provide an "ex" mode. config BUSYBOX_CONFIG_FEATURE_VI_YANKMARK @@ -118,16 +116,14 @@ config BUSYBOX_CONFIG_FEATURE_VI_YANKMARK default BUSYBOX_DEFAULT_FEATURE_VI_YANKMARK depends on BUSYBOX_CONFIG_VI help - This will enable you to use yank and put, as well as mark in - busybox vi. + This will enable you to use yank and put, as well as mark. config BUSYBOX_CONFIG_FEATURE_VI_SEARCH bool "Enable search and replace cmds" default BUSYBOX_DEFAULT_FEATURE_VI_SEARCH depends on BUSYBOX_CONFIG_VI help - Select this if you wish to be able to do search and replace in - busybox vi. + Select this if you wish to be able to do search and replace. config BUSYBOX_CONFIG_FEATURE_VI_REGEX_SEARCH bool "Enable regex in search and replace" @@ -141,16 +137,15 @@ config BUSYBOX_CONFIG_FEATURE_VI_USE_SIGNALS default BUSYBOX_DEFAULT_FEATURE_VI_USE_SIGNALS depends on BUSYBOX_CONFIG_VI help - Selecting this option will make busybox vi signal aware. This will - make busybox vi support SIGWINCH to deal with Window Changes, catch - Ctrl-Z and Ctrl-C and alarms. + Selecting this option will make vi signal aware. This will support + SIGWINCH to deal with Window Changes, catch ^Z and ^C and alarms. config BUSYBOX_CONFIG_FEATURE_VI_DOT_CMD bool "Remember previous cmd and \".\" cmd" default BUSYBOX_DEFAULT_FEATURE_VI_DOT_CMD depends on BUSYBOX_CONFIG_VI help - Make busybox vi remember the last command and be able to repeat it. + Make vi remember the last command and be able to repeat it. config BUSYBOX_CONFIG_FEATURE_VI_READONLY bool "Enable -R option and \"view\" mode" @@ -161,25 +156,23 @@ config BUSYBOX_CONFIG_FEATURE_VI_READONLY open a file in read-only mode. config BUSYBOX_CONFIG_FEATURE_VI_SETOPTS - bool "Enable set-able options, ai ic showmatch" + bool "Enable settable options, ai ic showmatch" default BUSYBOX_DEFAULT_FEATURE_VI_SETOPTS depends on BUSYBOX_CONFIG_VI help Enable the editor to set some (ai, ic, showmatch) options. config BUSYBOX_CONFIG_FEATURE_VI_SET - bool "Support for :set" + bool "Support :set" default BUSYBOX_DEFAULT_FEATURE_VI_SET depends on BUSYBOX_CONFIG_VI - help - Support for ":set". config BUSYBOX_CONFIG_FEATURE_VI_WIN_RESIZE bool "Handle window resize" default BUSYBOX_DEFAULT_FEATURE_VI_WIN_RESIZE depends on BUSYBOX_CONFIG_VI help - Make busybox vi behave nicely with terminals that get resized. + Behave nicely with terminals that get resized. config BUSYBOX_CONFIG_FEATURE_VI_ASK_TERMINAL bool "Use 'tell me cursor position' ESC sequence to measure window" @@ -190,15 +183,16 @@ config BUSYBOX_CONFIG_FEATURE_VI_ASK_TERMINAL this option makes vi perform a last-ditch effort to find it: position cursor to 999,999 and ask terminal to report real cursor position using "ESC [ 6 n" escape sequence, then read stdin. - This is not clean but helps a lot on serial lines and such. + config BUSYBOX_CONFIG_FEATURE_VI_UNDO - bool "Support undo command 'u'" + bool "Support undo command \"u\"" default BUSYBOX_DEFAULT_FEATURE_VI_UNDO depends on BUSYBOX_CONFIG_VI help Support the 'u' command to undo insertion, deletion, and replacement of text. + config BUSYBOX_CONFIG_FEATURE_VI_UNDO_QUEUE bool "Enable undo operation queuing" default BUSYBOX_DEFAULT_FEATURE_VI_UNDO_QUEUE @@ -209,6 +203,7 @@ config BUSYBOX_CONFIG_FEATURE_VI_UNDO_QUEUE reached, the contents of the queue are committed to the undo stack. This increases the size of the undo code and allows some undo operations (especially un-typing/backspacing) to be far more useful. + config BUSYBOX_CONFIG_FEATURE_VI_UNDO_QUEUE_MAX int "Maximum undo character queue size" default BUSYBOX_DEFAULT_FEATURE_VI_UNDO_QUEUE_MAX @@ -228,7 +223,7 @@ config BUSYBOX_CONFIG_FEATURE_ALLOW_EXEC default BUSYBOX_DEFAULT_FEATURE_ALLOW_EXEC depends on BUSYBOX_CONFIG_VI || BUSYBOX_CONFIG_AWK help - Enables vi and awk features which allows user to execute + Enables vi and awk features which allow user to execute shell commands (using system() C call). endmenu diff --git a/package/utils/busybox/config/findutils/Config.in b/package/utils/busybox/config/findutils/Config.in index 7d636d1ac4ee..3393adbe3bba 100644 --- a/package/utils/busybox/config/findutils/Config.in +++ b/package/utils/busybox/config/findutils/Config.in @@ -42,8 +42,6 @@ config BUSYBOX_CONFIG_FEATURE_FIND_PERM bool "Enable -perm: permissions matching" default BUSYBOX_DEFAULT_FEATURE_FIND_PERM depends on BUSYBOX_CONFIG_FIND - help - Enable searching based on file permissions. config BUSYBOX_CONFIG_FEATURE_FIND_TYPE bool "Enable -type: file type matching (file/dir/link/...)" @@ -57,15 +55,11 @@ config BUSYBOX_CONFIG_FEATURE_FIND_XDEV bool "Enable -xdev: 'stay in filesystem'" default BUSYBOX_DEFAULT_FEATURE_FIND_XDEV depends on BUSYBOX_CONFIG_FIND - help - This option allows find to restrict searches to a single filesystem. config BUSYBOX_CONFIG_FEATURE_FIND_MAXDEPTH bool "Enable -mindepth N and -maxdepth N" default BUSYBOX_DEFAULT_FEATURE_FIND_MAXDEPTH depends on BUSYBOX_CONFIG_FIND - help - This option enables -mindepth N and -maxdepth N option. config BUSYBOX_CONFIG_FEATURE_FIND_NEWER bool "Enable -newer: compare file modification times" @@ -79,8 +73,6 @@ config BUSYBOX_CONFIG_FEATURE_FIND_INUM bool "Enable -inum: inode number matching" default BUSYBOX_DEFAULT_FEATURE_FIND_INUM depends on BUSYBOX_CONFIG_FIND - help - Support the 'find -inum' option for searching by inode number. config BUSYBOX_CONFIG_FEATURE_FIND_EXEC bool "Enable -exec: execute commands" @@ -104,15 +96,11 @@ config BUSYBOX_CONFIG_FEATURE_FIND_USER bool "Enable -user: username/uid matching" default BUSYBOX_DEFAULT_FEATURE_FIND_USER depends on BUSYBOX_CONFIG_FIND - help - Support the 'find -user' option for searching by username or uid. config BUSYBOX_CONFIG_FEATURE_FIND_GROUP bool "Enable -group: group/gid matching" default BUSYBOX_DEFAULT_FEATURE_FIND_GROUP depends on BUSYBOX_CONFIG_FIND - help - Support the 'find -group' option for searching by group name or gid. config BUSYBOX_CONFIG_FEATURE_FIND_NOT bool "Enable the 'not' (!) operator" @@ -141,15 +129,13 @@ config BUSYBOX_CONFIG_FEATURE_FIND_SIZE bool "Enable -size: file size matching" default BUSYBOX_DEFAULT_FEATURE_FIND_SIZE depends on BUSYBOX_CONFIG_FIND - help - Support the 'find -size' option for searching by file size. config BUSYBOX_CONFIG_FEATURE_FIND_PRUNE bool "Enable -prune: exclude subdirectories" default BUSYBOX_DEFAULT_FEATURE_FIND_PRUNE depends on BUSYBOX_CONFIG_FIND help - If the file is a directory, dont descend into it. Useful for + If the file is a directory, don't descend into it. Useful for exclusion .svn and CVS directories. config BUSYBOX_CONFIG_FEATURE_FIND_DELETE @@ -209,7 +195,7 @@ config BUSYBOX_CONFIG_FGREP config BUSYBOX_CONFIG_FEATURE_GREP_CONTEXT bool "Enable before and after context flags (-A, -B and -C)" default BUSYBOX_DEFAULT_FEATURE_GREP_CONTEXT - depends on BUSYBOX_CONFIG_GREP || BUSYBOX_CONFIG_EGREP + depends on BUSYBOX_CONFIG_GREP || BUSYBOX_CONFIG_EGREP || BUSYBOX_CONFIG_FGREP help Print the specified number of leading (-B) and/or trailing (-A) context surrounding our matching lines. diff --git a/package/utils/busybox/config/init/Config.in b/package/utils/busybox/config/init/Config.in index cd1a3451972c..072df33893d1 100644 --- a/package/utils/busybox/config/init/Config.in +++ b/package/utils/busybox/config/init/Config.in @@ -89,7 +89,7 @@ config BUSYBOX_CONFIG_INIT init is the first program run when the system boots. config BUSYBOX_CONFIG_LINUXRC - bool "Support running init from within an initrd (not initramfs)" + bool "linuxrc: support running init from initrd (not initramfs)" default BUSYBOX_DEFAULT_LINUXRC select BUSYBOX_CONFIG_FEATURE_SYSLOG help @@ -145,13 +145,15 @@ config BUSYBOX_CONFIG_FEATURE_INIT_SYSLOG bool "Enable init to write to syslog" default BUSYBOX_DEFAULT_FEATURE_INIT_SYSLOG depends on BUSYBOX_CONFIG_INIT || BUSYBOX_CONFIG_LINUXRC + help + If selected, some init messages are sent to syslog. + Otherwise, they are sent to VT #5 if linux virtual tty is detected + (if not, no separate logging is done). -config BUSYBOX_CONFIG_FEATURE_EXTRA_QUIET - bool "Be _extra_ quiet on boot" - default BUSYBOX_DEFAULT_FEATURE_EXTRA_QUIET +config BUSYBOX_CONFIG_FEATURE_INIT_QUIET + bool "Be quiet on boot (no 'init started:' message)" + default BUSYBOX_DEFAULT_FEATURE_INIT_QUIET depends on BUSYBOX_CONFIG_INIT || BUSYBOX_CONFIG_LINUXRC - help - Prevent init from logging some messages to the console during boot. config BUSYBOX_CONFIG_FEATURE_INIT_COREDUMPS bool "Support dumping core for child processes (debugging only)" @@ -176,36 +178,18 @@ config BUSYBOX_CONFIG_INIT_TERMINAL_TYPE sets TERM to "vt102" if one is found. config BUSYBOX_CONFIG_FEATURE_INIT_MODIFY_CMDLINE - bool "Modify the command-line to \"init\"" + bool "Clear init's command line" default BUSYBOX_DEFAULT_FEATURE_INIT_MODIFY_CMDLINE depends on BUSYBOX_CONFIG_INIT || BUSYBOX_CONFIG_LINUXRC help When launched as PID 1 and after parsing its arguments, init wipes all the arguments but argv[0] and rewrites argv[0] to - contain only "init", so that its command-line appears solely as + contain only "init", so that its command line appears solely as "init" in tools such as ps. If this option is set to Y, init will keep its original behavior, otherwise, all the arguments including argv[0] will be preserved, be they parsed or ignored by init. The original command-line used to launch init can then be retrieved in /proc/1/cmdline on Linux, for example. -config BUSYBOX_CONFIG_MESG - bool "mesg" - default BUSYBOX_DEFAULT_MESG - help - Mesg controls access to your terminal by others. It is typically - used to allow or disallow other users to write to your terminal - -config BUSYBOX_CONFIG_FEATURE_MESG_ENABLE_ONLY_GROUP - bool "Enable writing to tty only by group, not by everybody" - default BUSYBOX_DEFAULT_FEATURE_MESG_ENABLE_ONLY_GROUP - depends on BUSYBOX_CONFIG_MESG - help - Usually, ttys are owned by group "tty", and "write" tool is - setgid to this group. This way, "mesg y" only needs to enable - "write by owning group" bit in tty mode. - - If you set this option to N, "mesg y" will enable writing - by anybody at all. This is not recommended. endmenu diff --git a/package/utils/busybox/config/libbb/Config.in b/package/utils/busybox/config/libbb/Config.in index ec08351b5c6b..1687ed5c78ad 100644 --- a/package/utils/busybox/config/libbb/Config.in +++ b/package/utils/busybox/config/libbb/Config.in @@ -108,24 +108,13 @@ config BUSYBOX_CONFIG_FEATURE_FAST_TOP but code size is slightly bigger. config BUSYBOX_CONFIG_FEATURE_ETC_NETWORKS - bool "Support for /etc/networks" + bool "Support /etc/networks" default BUSYBOX_DEFAULT_FEATURE_ETC_NETWORKS help Enable support for network names in /etc/networks. This is a rarely used feature which allows you to use names instead of IP/mask pairs in route command. -config BUSYBOX_CONFIG_FEATURE_USE_TERMIOS - bool "Use termios to manipulate the screen" - default BUSYBOX_DEFAULT_FEATURE_USE_TERMIOS - depends on BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TOP || BUSYBOX_CONFIG_POWERTOP - help - This option allows utilities such as 'more' and 'top' to determine - the size of the screen. If you leave this disabled, your utilities - that display things on the screen will be especially primitive and - will be unable to determine the current screen size, and will be - unable to move the cursor. - config BUSYBOX_CONFIG_FEATURE_EDITING bool "Command line editing" default BUSYBOX_DEFAULT_FEATURE_EDITING @@ -185,15 +174,11 @@ config BUSYBOX_CONFIG_FEATURE_TAB_COMPLETION bool "Tab completion" default BUSYBOX_DEFAULT_FEATURE_TAB_COMPLETION depends on BUSYBOX_CONFIG_FEATURE_EDITING - help - Enable tab completion. config BUSYBOX_CONFIG_FEATURE_USERNAME_COMPLETION bool "Username completion" default BUSYBOX_DEFAULT_FEATURE_USERNAME_COMPLETION depends on BUSYBOX_CONFIG_FEATURE_TAB_COMPLETION - help - Enable username completion. config BUSYBOX_CONFIG_FEATURE_EDITING_FANCY_PROMPT bool "Fancy shell prompts" diff --git a/package/utils/busybox/config/loginutils/Config.in b/package/utils/busybox/config/loginutils/Config.in index 956115c7f42d..fa0059587760 100644 --- a/package/utils/busybox/config/loginutils/Config.in +++ b/package/utils/busybox/config/loginutils/Config.in @@ -7,7 +7,7 @@ menu "Login/Password Management Utilities" config BUSYBOX_CONFIG_FEATURE_SHADOWPASSWDS - bool "Support for shadow passwords" + bool "Support shadow passwords" default BUSYBOX_DEFAULT_FEATURE_SHADOWPASSWDS help Build support for shadow password in /etc/shadow. This file is only @@ -113,15 +113,13 @@ config BUSYBOX_CONFIG_FEATURE_ADDGROUP_LONG_OPTIONS bool "Enable long options" default BUSYBOX_DEFAULT_FEATURE_ADDGROUP_LONG_OPTIONS depends on BUSYBOX_CONFIG_ADDGROUP && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the addgroup applet. config BUSYBOX_CONFIG_FEATURE_ADDUSER_TO_GROUP - bool "Support for adding users to groups" + bool "Support adding users to groups" default BUSYBOX_DEFAULT_FEATURE_ADDUSER_TO_GROUP depends on BUSYBOX_CONFIG_ADDGROUP help - If called with two non-option arguments, + If called with two non-option arguments, addgroup will add an existing user to an existing group. config BUSYBOX_CONFIG_ADDUSER @@ -134,8 +132,6 @@ config BUSYBOX_CONFIG_FEATURE_ADDUSER_LONG_OPTIONS bool "Enable long options" default BUSYBOX_DEFAULT_FEATURE_ADDUSER_LONG_OPTIONS depends on BUSYBOX_CONFIG_ADDUSER && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the adduser applet. config BUSYBOX_CONFIG_FEATURE_CHECK_NAMES bool "Enable sanity check on user/group names in adduser and addgroup" @@ -179,9 +175,9 @@ config BUSYBOX_CONFIG_CHPASSWD and uses this information to update a group of existing users. config BUSYBOX_CONFIG_FEATURE_DEFAULT_PASSWD_ALGO - string "Default password encryption method (passwd -a, cryptpw -m parameter)" + string "Default encryption method (passwd -a, cryptpw -m, chpasswd -c ALG)" default BUSYBOX_DEFAULT_FEATURE_DEFAULT_PASSWD_ALGO - depends on BUSYBOX_CONFIG_PASSWD || BUSYBOX_CONFIG_CRYPTPW + depends on BUSYBOX_CONFIG_PASSWD || BUSYBOX_CONFIG_CRYPTPW || BUSYBOX_CONFIG_CHPASSWD help Possible choices are "d[es]", "m[d5]", "s[ha256]" or "sha512". config BUSYBOX_CONFIG_CRYPTPW @@ -211,7 +207,7 @@ config BUSYBOX_CONFIG_DELGROUP Utility for deleting a group account. config BUSYBOX_CONFIG_FEATURE_DEL_USER_FROM_GROUP - bool "Support for removing users from groups" + bool "Support removing users from groups" default BUSYBOX_DEFAULT_FEATURE_DEL_USER_FROM_GROUP depends on BUSYBOX_CONFIG_DELGROUP help @@ -257,7 +253,7 @@ config BUSYBOX_CONFIG_LOGIN_SESSION_AS_CHILD will not be cleaned up. config BUSYBOX_CONFIG_LOGIN_SCRIPTS - bool "Support for login scripts" + bool "Support login scripts" depends on BUSYBOX_CONFIG_LOGIN default BUSYBOX_DEFAULT_LOGIN_SCRIPTS help @@ -265,7 +261,7 @@ config BUSYBOX_CONFIG_LOGIN_SCRIPTS just prior to switching from root to logged-in user. config BUSYBOX_CONFIG_FEATURE_NOLOGIN - bool "Support for /etc/nologin" + bool "Support /etc/nologin" default BUSYBOX_DEFAULT_FEATURE_NOLOGIN depends on BUSYBOX_CONFIG_LOGIN help @@ -273,7 +269,7 @@ config BUSYBOX_CONFIG_FEATURE_NOLOGIN If it exists, non-root logins are prohibited. config BUSYBOX_CONFIG_FEATURE_SECURETTY - bool "Support for /etc/securetty" + bool "Support /etc/securetty" default BUSYBOX_DEFAULT_FEATURE_SECURETTY depends on BUSYBOX_CONFIG_LOGIN help @@ -306,19 +302,23 @@ config BUSYBOX_CONFIG_SU help su is used to become another user during a login session. Invoked without a username, su defaults to becoming the super user. - - Note that Busybox binary must be setuid root for this applet to + Note that busybox binary must be setuid root for this applet to work properly. config BUSYBOX_CONFIG_FEATURE_SU_SYSLOG - bool "Enable su to write to syslog" + bool "Log to syslog all attempts to use su" default BUSYBOX_DEFAULT_FEATURE_SU_SYSLOG depends on BUSYBOX_CONFIG_SU config BUSYBOX_CONFIG_FEATURE_SU_CHECKS_SHELLS - bool "Enable su to check user's shell to be listed in /etc/shells" - depends on BUSYBOX_CONFIG_SU + bool "If user's shell is not in /etc/shells, disallow -s PROG" default BUSYBOX_DEFAULT_FEATURE_SU_CHECKS_SHELLS + depends on BUSYBOX_CONFIG_SU + +config BUSYBOX_CONFIG_FEATURE_SU_BLANK_PW_NEEDS_SECURE_TTY + bool "Allow blank passwords only on TTYs in /etc/securetty" + default BUSYBOX_DEFAULT_FEATURE_SU_BLANK_PW_NEEDS_SECURE_TTY + depends on BUSYBOX_CONFIG_SU config BUSYBOX_CONFIG_SULOGIN bool "sulogin" default BUSYBOX_DEFAULT_SULOGIN diff --git a/package/utils/busybox/config/miscutils/Config.in b/package/utils/busybox/config/miscutils/Config.in index 817a514b75ee..61c5458b637c 100644 --- a/package/utils/busybox/config/miscutils/Config.in +++ b/package/utils/busybox/config/miscutils/Config.in @@ -42,7 +42,7 @@ config BUSYBOX_CONFIG_BEEP config BUSYBOX_CONFIG_FEATURE_BEEP_FREQ int "default frequency" - range 0 2147483647 + range 20 50000 # allowing 0 here breaks the build default BUSYBOX_DEFAULT_FEATURE_BEEP_FREQ depends on BUSYBOX_CONFIG_BEEP help @@ -121,12 +121,6 @@ config BUSYBOX_CONFIG_FEATURE_CHAT_CLR_ABORT default BUSYBOX_DEFAULT_FEATURE_CHAT_CLR_ABORT help Support CLR_ABORT directive. -config BUSYBOX_CONFIG_CHRT - bool "chrt" - default BUSYBOX_DEFAULT_CHRT - help - manipulate real-time attributes of a process. - This requires sched_{g,s}etparam support in your libc. config BUSYBOX_CONFIG_CONSPY bool "conspy" default BUSYBOX_DEFAULT_CONSPY @@ -220,7 +214,7 @@ config BUSYBOX_CONFIG_DEVFSD_MODLOAD the external modutils. config BUSYBOX_CONFIG_DEVFSD_FG_NP - bool "Enables the -fg and -np options" + bool "Enable the -fg and -np options" default BUSYBOX_DEFAULT_DEVFSD_FG_NP depends on BUSYBOX_CONFIG_DEVFSD help @@ -253,20 +247,6 @@ config BUSYBOX_CONFIG_DEVMEM help devmem is a small program that reads and writes from physical memory using /dev/mem. -config BUSYBOX_CONFIG_EJECT - bool "eject" - default BUSYBOX_DEFAULT_EJECT - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Used to eject cdroms. (defaults to /dev/cdrom) - -config BUSYBOX_CONFIG_FEATURE_EJECT_SCSI - bool "SCSI support" - default BUSYBOX_DEFAULT_FEATURE_EJECT_SCSI - depends on BUSYBOX_CONFIG_EJECT - help - Add the -s option to eject, this allows to eject SCSI-Devices and - usb-storage devices. config BUSYBOX_CONFIG_FBSPLASH bool "fbsplash" default BUSYBOX_DEFAULT_FBSPLASH @@ -327,7 +307,7 @@ config BUSYBOX_CONFIG_FEATURE_HDPARM_GET_IDENTITY default BUSYBOX_DEFAULT_FEATURE_HDPARM_GET_IDENTITY depends on BUSYBOX_CONFIG_HDPARM help - Enables the -I and -i options to obtain detailed information + Enable the -I and -i options to obtain detailed information directly from drives about their capabilities and supported ATA feature set. If no device name is specified, hdparm will read identify data from stdin. Enabling this option will add about 16k... @@ -337,7 +317,7 @@ config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF default BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_SCAN_HWIF depends on BUSYBOX_CONFIG_HDPARM help - Enables the 'hdparm -R' option to register an IDE interface. + Enable the 'hdparm -R' option to register an IDE interface. This is dangerous stuff, so you should probably say N. config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF @@ -345,7 +325,7 @@ config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF default BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF depends on BUSYBOX_CONFIG_HDPARM help - Enables the 'hdparm -U' option to un-register an IDE interface. + Enable the 'hdparm -U' option to un-register an IDE interface. This is dangerous stuff, so you should probably say N. config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET @@ -353,7 +333,7 @@ config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET default BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_DRIVE_RESET depends on BUSYBOX_CONFIG_HDPARM help - Enables the 'hdparm -w' option to perform a device reset. + Enable the 'hdparm -w' option to perform a device reset. This is dangerous stuff, so you should probably say N. config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF @@ -361,7 +341,7 @@ config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF default BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_TRISTATE_HWIF depends on BUSYBOX_CONFIG_HDPARM help - Enables the 'hdparm -x' option to tristate device for hotswap, + Enable the 'hdparm -x' option to tristate device for hotswap, and the '-b' option to get/set bus state. This is dangerous stuff, so you should probably say N. @@ -370,7 +350,7 @@ config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA default BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_GETSET_DMA depends on BUSYBOX_CONFIG_HDPARM help - Enables the 'hdparm -d' option to get/set using_dma flag. + Enable the 'hdparm -d' option to get/set using_dma flag. config BUSYBOX_CONFIG_I2CGET bool "i2cget" default BUSYBOX_DEFAULT_I2CGET @@ -405,27 +385,6 @@ config BUSYBOX_CONFIG_INOTIFYD help Simple inotify daemon. Reports filesystem changes. Requires kernel >= 2.6.13 -config BUSYBOX_CONFIG_IONICE - bool "ionice" - default BUSYBOX_DEFAULT_IONICE - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Set/set program io scheduling class and priority - Requires kernel >= 2.6.13 -config BUSYBOX_CONFIG_LAST - bool "last" - default BUSYBOX_DEFAULT_LAST - depends on BUSYBOX_CONFIG_FEATURE_WTMP - help - 'last' displays a list of the last users that logged into the system. - -config BUSYBOX_CONFIG_FEATURE_LAST_FANCY - bool "Turn on output of extra information" - default BUSYBOX_DEFAULT_FEATURE_LAST_FANCY - depends on BUSYBOX_CONFIG_LAST - help - 'last' displays detailed information about the last users that - logged into the system (mimics sysvinit last). +900 bytes. config BUSYBOX_CONFIG_LESS bool "less" default BUSYBOX_DEFAULT_LESS @@ -492,7 +451,6 @@ config BUSYBOX_CONFIG_FEATURE_LESS_ASK_TERMINAL this option makes less perform a last-ditch effort to find it: position cursor to 999,999 and ask terminal to report real cursor position using "ESC [ 6 n" escape sequence, then read stdin. - This is not clean but helps a lot on serial lines and such. config BUSYBOX_CONFIG_FEATURE_LESS_DASHCMD @@ -504,16 +462,23 @@ config BUSYBOX_CONFIG_FEATURE_LESS_DASHCMD less itself ('-' keyboard command). config BUSYBOX_CONFIG_FEATURE_LESS_LINENUMS - bool "Enable dynamic switching of line numbers" + bool "Enable -N (dynamic switching of line numbers)" default BUSYBOX_DEFAULT_FEATURE_LESS_LINENUMS depends on BUSYBOX_CONFIG_FEATURE_LESS_DASHCMD - help - Enables "-N" command. config BUSYBOX_CONFIG_LOCK bool "lock" default BUSYBOX_DEFAULT_LOCK help Small utility for using locks in scripts +config BUSYBOX_CONFIG_LSSCSI + bool "lsscsi" + default BUSYBOX_DEFAULT_LSSCSI + #select PLATFORM_LINUX + help + lsscsi is a utility for displaying information about SCSI buses in the + system and devices connected to them. + + This version uses sysfs (/sys/bus/scsi/devices) only. config BUSYBOX_CONFIG_MAKEDEVS bool "makedevs" default BUSYBOX_DEFAULT_MAKEDEVS @@ -555,11 +520,6 @@ config BUSYBOX_CONFIG_MICROCOM default BUSYBOX_DEFAULT_MICROCOM help The poor man's minicom utility for chatting with serial port devices. -config BUSYBOX_CONFIG_MOUNTPOINT - bool "mountpoint" - default BUSYBOX_DEFAULT_MOUNTPOINT - help - mountpoint checks if the directory is a mountpoint. config BUSYBOX_CONFIG_MT bool "mt" default BUSYBOX_DEFAULT_MT @@ -580,6 +540,12 @@ config BUSYBOX_CONFIG_NANDDUMP select BUSYBOX_CONFIG_PLATFORM_LINUX help Dump the content of raw NAND chip +config BUSYBOX_CONFIG_PARTPROBE + bool "partprobe" + default BUSYBOX_DEFAULT_PARTPROBE + select BUSYBOX_CONFIG_PLATFORM_LINUX + help + Ask kernel to rescan partition table. config BUSYBOX_CONFIG_RAIDAUTORUN bool "raidautorun" default BUSYBOX_DEFAULT_RAIDAUTORUN @@ -637,32 +603,12 @@ config BUSYBOX_CONFIG_SETSERIAL select BUSYBOX_CONFIG_PLATFORM_LINUX help Retrieve or set Linux serial port. -config BUSYBOX_CONFIG_SETSID - bool "setsid" - default BUSYBOX_DEFAULT_SETSID - help - setsid runs a program in a new session config BUSYBOX_CONFIG_STRINGS bool "strings" default BUSYBOX_DEFAULT_STRINGS help strings prints the printable character sequences for each file specified. -config BUSYBOX_CONFIG_TASKSET - bool "taskset" - default BUSYBOX_DEFAULT_TASKSET # doesn't build on some non-x86 targets (m68k) - help - Retrieve or set a processes's CPU affinity. - This requires sched_{g,s}etaffinity support in your libc. - -config BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY - bool "Fancy output" - default BUSYBOX_DEFAULT_FEATURE_TASKSET_FANCY - depends on BUSYBOX_CONFIG_TASKSET - help - Add code for fancy output. This merely silences a compiler-warning - and adds about 135 Bytes. May be needed for machines with alot - of CPUs. config BUSYBOX_CONFIG_TIME bool "time" default BUSYBOX_DEFAULT_TIME @@ -670,12 +616,6 @@ config BUSYBOX_CONFIG_TIME The time command runs the specified program with the given arguments. When the command finishes, time writes a message to standard output giving timing statistics about this program run. -config BUSYBOX_CONFIG_TIMEOUT - bool "timeout" - default BUSYBOX_DEFAULT_TIMEOUT - help - Runs a program and watches it. If it does not terminate in - specified number of seconds, it is sent a signal. config BUSYBOX_CONFIG_TTYSIZE bool "ttysize" default BUSYBOX_DEFAULT_TTYSIZE @@ -736,12 +676,6 @@ config BUSYBOX_CONFIG_VOLNAME default BUSYBOX_DEFAULT_VOLNAME help Prints a CD-ROM volume name. -config BUSYBOX_CONFIG_WALL - bool "wall" - default BUSYBOX_DEFAULT_WALL - depends on BUSYBOX_CONFIG_FEATURE_UTMP - help - Write a message to all users that are logged in. config BUSYBOX_CONFIG_WATCHDOG bool "watchdog" default BUSYBOX_DEFAULT_WATCHDOG diff --git a/package/utils/busybox/config/modutils/Config.in b/package/utils/busybox/config/modutils/Config.in index 5203db8c598a..9791af65a090 100644 --- a/package/utils/busybox/config/modutils/Config.in +++ b/package/utils/busybox/config/modutils/Config.in @@ -9,9 +9,11 @@ menu "Linux Module Utilities" config BUSYBOX_CONFIG_MODPROBE_SMALL bool "Simplified modutils" default BUSYBOX_DEFAULT_MODPROBE_SMALL - select BUSYBOX_CONFIG_PLATFORM_LINUX help - Simplified modutils. + Build smaller (~1.5 kbytes), simplified module tools. + + This option by itself does not enable any applets - + you need to select applets individually below. With this option modprobe does not require modules.dep file and does not use /etc/modules.conf file. @@ -32,11 +34,6 @@ config BUSYBOX_CONFIG_MODPROBE_SMALL Additional module parameters can be stored in /etc/modules/$module_name files. - Apart from modprobe, other utilities are also provided: - - insmod is an alias to modprobe - - rmmod is an alias to modprobe -r - - depmod generates modules.dep.bb - config BUSYBOX_CONFIG_DEPMOD bool "depmod" default BUSYBOX_DEFAULT_DEPMOD @@ -62,7 +59,6 @@ config BUSYBOX_CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT bool "Pretty output" default BUSYBOX_DEFAULT_FEATURE_LSMOD_PRETTY_2_6_OUTPUT depends on BUSYBOX_CONFIG_LSMOD && !BUSYBOX_CONFIG_MODPROBE_SMALL - select BUSYBOX_CONFIG_PLATFORM_LINUX help This option makes output format of lsmod adjusted to the format of module-init-tools for Linux kernel 2.6. @@ -73,20 +69,6 @@ config BUSYBOX_CONFIG_MODINFO select BUSYBOX_CONFIG_PLATFORM_LINUX help Show information about a Linux Kernel module -config BUSYBOX_CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE - bool "Accept module options on modprobe command line" - default BUSYBOX_DEFAULT_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE - depends on BUSYBOX_CONFIG_MODPROBE_SMALL - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Allow insmod and modprobe take module options from command line. - -config BUSYBOX_CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED - bool "Skip loading of already loaded modules" - default BUSYBOX_DEFAULT_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED - depends on BUSYBOX_CONFIG_MODPROBE_SMALL - help - Check if the module is already loaded. config BUSYBOX_CONFIG_MODPROBE bool "modprobe" default BUSYBOX_DEFAULT_MODPROBE @@ -99,7 +81,6 @@ config BUSYBOX_CONFIG_FEATURE_MODPROBE_BLACKLIST bool "Blacklist support" default BUSYBOX_DEFAULT_FEATURE_MODPROBE_BLACKLIST depends on BUSYBOX_CONFIG_MODPROBE && !BUSYBOX_CONFIG_MODPROBE_SMALL - select BUSYBOX_CONFIG_PLATFORM_LINUX help Say 'y' here to enable support for the 'blacklist' command in modprobe.conf. This prevents the alias resolver to resolve @@ -115,38 +96,34 @@ config BUSYBOX_CONFIG_RMMOD comment "Options common to multiple modutils" +config BUSYBOX_CONFIG_FEATURE_CMDLINE_MODULE_OPTIONS + bool "Accept module options on modprobe command line" + default BUSYBOX_DEFAULT_FEATURE_CMDLINE_MODULE_OPTIONS + depends on BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_MODPROBE + help + Allow insmod and modprobe take module options from the applets' + command line. + +config BUSYBOX_CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED + bool "Skip loading of already loaded modules" + default BUSYBOX_DEFAULT_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED + depends on BUSYBOX_CONFIG_MODPROBE_SMALL && (BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_MODPROBE) + help + Check if the module is already loaded. + config BUSYBOX_CONFIG_FEATURE_2_4_MODULES bool "Support version 2.2/2.4 Linux kernels" default BUSYBOX_DEFAULT_FEATURE_2_4_MODULES - depends on BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_RMMOD || BUSYBOX_CONFIG_LSMOD - select BUSYBOX_CONFIG_PLATFORM_LINUX + depends on (BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_LSMOD || BUSYBOX_CONFIG_MODPROBE || BUSYBOX_CONFIG_RMMOD) && !BUSYBOX_CONFIG_MODPROBE_SMALL help Support module loading for 2.2.x and 2.4.x Linux kernels. This increases size considerably. Say N unless you plan to run ancient kernels. -config BUSYBOX_CONFIG_FEATURE_INSMOD_TRY_MMAP - bool "Try to load module from a mmap'ed area" - default BUSYBOX_DEFAULT_FEATURE_INSMOD_TRY_MMAP - depends on BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_MODPROBE_SMALL - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - This option causes module loading code to try to mmap - module first. If it does not work (for example, - it does not work for compressed modules), module will be read - (and unpacked if needed) into a memory block allocated by malloc. - - The only case when mmap works but malloc does not is when - you are trying to load a big module on a very memory-constrained - machine. Malloc will momentarily need 2x as much memory as mmap. - - Choosing N saves about 250 bytes of code (on 32-bit x86). - config BUSYBOX_CONFIG_FEATURE_INSMOD_VERSION_CHECKING bool "Enable module version checking" default BUSYBOX_DEFAULT_FEATURE_INSMOD_VERSION_CHECKING depends on BUSYBOX_CONFIG_FEATURE_2_4_MODULES && (BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_MODPROBE) - select BUSYBOX_CONFIG_PLATFORM_LINUX help Support checking of versions for modules. This is used to ensure that the kernel and module are made for each other. @@ -155,10 +132,9 @@ config BUSYBOX_CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS bool "Add module symbols to kernel symbol table" default BUSYBOX_DEFAULT_FEATURE_INSMOD_KSYMOOPS_SYMBOLS depends on BUSYBOX_CONFIG_FEATURE_2_4_MODULES && (BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_MODPROBE) - select BUSYBOX_CONFIG_PLATFORM_LINUX help By adding module symbols to the kernel symbol table, Oops messages - occuring within kernel modules can be properly debugged. By enabling + occurring within kernel modules can be properly debugged. By enabling this feature, module symbols will always be added to the kernel symbol table for proper debugging support. If you are not interested in Oops messages from kernel modules, say N. @@ -167,7 +143,6 @@ config BUSYBOX_CONFIG_FEATURE_INSMOD_LOADINKMEM bool "In kernel memory optimization (uClinux only)" default BUSYBOX_DEFAULT_FEATURE_INSMOD_LOADINKMEM depends on BUSYBOX_CONFIG_FEATURE_2_4_MODULES && (BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_MODPROBE) - select BUSYBOX_CONFIG_PLATFORM_LINUX help This is a special uClinux only memory optimization that lets insmod load the specified kernel module directly into kernel space, reducing @@ -178,7 +153,6 @@ config BUSYBOX_CONFIG_FEATURE_INSMOD_LOAD_MAP bool "Enable insmod load map (-m) option" default BUSYBOX_DEFAULT_FEATURE_INSMOD_LOAD_MAP depends on BUSYBOX_CONFIG_FEATURE_2_4_MODULES && BUSYBOX_CONFIG_INSMOD - select BUSYBOX_CONFIG_PLATFORM_LINUX help Enabling this, one would be able to get a load map output on stdout. This makes kernel module debugging @@ -189,8 +163,7 @@ config BUSYBOX_CONFIG_FEATURE_INSMOD_LOAD_MAP config BUSYBOX_CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL bool "Symbols in load map" default BUSYBOX_DEFAULT_FEATURE_INSMOD_LOAD_MAP_FULL - depends on BUSYBOX_CONFIG_FEATURE_INSMOD_LOAD_MAP && !BUSYBOX_CONFIG_MODPROBE_SMALL - select BUSYBOX_CONFIG_PLATFORM_LINUX + depends on BUSYBOX_CONFIG_FEATURE_INSMOD_LOAD_MAP help Without this option, -m will only output section load map. With this option, -m will also output @@ -200,18 +173,32 @@ config BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE bool "Support tainted module checking with new kernels" default BUSYBOX_DEFAULT_FEATURE_CHECK_TAINTED_MODULE depends on (BUSYBOX_CONFIG_LSMOD || BUSYBOX_CONFIG_FEATURE_2_4_MODULES) && !BUSYBOX_CONFIG_MODPROBE_SMALL - select BUSYBOX_CONFIG_PLATFORM_LINUX help Support checking for tainted modules. These are usually binary only modules that will make the linux-kernel list ignore your support request. This option is required to support GPLONLY modules. +config BUSYBOX_CONFIG_FEATURE_INSMOD_TRY_MMAP + bool "Try to load module from a mmap'ed area" + default BUSYBOX_DEFAULT_FEATURE_INSMOD_TRY_MMAP + depends on (BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_MODPROBE) && !BUSYBOX_CONFIG_MODPROBE_SMALL + help + This option causes module loading code to try to mmap + module first. If it does not work (for example, + it does not work for compressed modules), module will be read + (and unpacked if needed) into a memory block allocated by malloc. + + The only case when mmap works but malloc does not is when + you are trying to load a big module on a very memory-constrained + machine. Malloc will momentarily need 2x as much memory as mmap. + + Choosing N saves about 250 bytes of code (on 32-bit x86). + config BUSYBOX_CONFIG_FEATURE_MODUTILS_ALIAS - bool "Support for module.aliases file" + bool "Support module.aliases file" default BUSYBOX_DEFAULT_FEATURE_MODUTILS_ALIAS - depends on BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_MODPROBE - select BUSYBOX_CONFIG_PLATFORM_LINUX + depends on (BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_MODPROBE) && !BUSYBOX_CONFIG_MODPROBE_SMALL help Generate and parse modules.alias containing aliases for bus identifiers: @@ -225,10 +212,9 @@ config BUSYBOX_CONFIG_FEATURE_MODUTILS_ALIAS Say Y if unsure. config BUSYBOX_CONFIG_FEATURE_MODUTILS_SYMBOLS - bool "Support for module.symbols file" + bool "Support module.symbols file" default BUSYBOX_DEFAULT_FEATURE_MODUTILS_SYMBOLS - depends on BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_MODPROBE - select BUSYBOX_CONFIG_PLATFORM_LINUX + depends on (BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_MODPROBE) && !BUSYBOX_CONFIG_MODPROBE_SMALL help Generate and parse modules.symbols containing aliases for symbol_request() kernel calls, such as: @@ -239,7 +225,7 @@ config BUSYBOX_CONFIG_FEATURE_MODUTILS_SYMBOLS config BUSYBOX_CONFIG_DEFAULT_MODULES_DIR string "Default directory containing modules" default BUSYBOX_DEFAULT_DEFAULT_MODULES_DIR - depends on BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_MODPROBE || BUSYBOX_CONFIG_MODPROBE_SMALL || BUSYBOX_CONFIG_MODINFO + depends on BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_MODPROBE || BUSYBOX_CONFIG_MODINFO help Directory that contains kernel modules. Defaults to "/lib/modules" @@ -247,9 +233,13 @@ config BUSYBOX_CONFIG_DEFAULT_MODULES_DIR config BUSYBOX_CONFIG_DEFAULT_DEPMOD_FILE string "Default name of modules.dep" default BUSYBOX_DEFAULT_DEFAULT_DEPMOD_FILE - depends on BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_MODPROBE || BUSYBOX_CONFIG_MODPROBE_SMALL || BUSYBOX_CONFIG_MODINFO + depends on BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_MODPROBE || BUSYBOX_CONFIG_MODINFO help Filename that contains kernel modules dependencies. - Defaults to "modules.dep" + Defaults to "modules.dep". + If you configured the "simplified modutils" (MODPROBE_SMALL), a + ".bb" suffix will be added after this name. Do not specify ".bb" + here unless you intend your depmod or modprobe to work on + "modules.dep.bb.bb" or such. endmenu diff --git a/package/utils/busybox/config/networking/Config.in b/package/utils/busybox/config/networking/Config.in index 4ae8779dc671..14875d5e681a 100644 --- a/package/utils/busybox/config/networking/Config.in +++ b/package/utils/busybox/config/networking/Config.in @@ -101,7 +101,7 @@ config BUSYBOX_CONFIG_FTPD bool "ftpd" default BUSYBOX_DEFAULT_FTPD help - simple FTP daemon. You have to run it via inetd. + Simple FTP daemon. You have to run it via inetd. config BUSYBOX_CONFIG_FEATURE_FTPD_WRITE bool "Enable upload commands" @@ -143,8 +143,6 @@ config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS bool "Enable long options in ftpget/ftpput" default BUSYBOX_DEFAULT_FEATURE_FTPGETPUT_LONG_OPTIONS depends on BUSYBOX_CONFIG_LONG_OPTS && (BUSYBOX_CONFIG_FTPGET || BUSYBOX_CONFIG_FTPPUT) - help - Support long options for the ftpget/ftpput applet. config BUSYBOX_CONFIG_HOSTNAME bool "hostname" default BUSYBOX_DEFAULT_HOSTNAME @@ -160,7 +158,7 @@ config BUSYBOX_CONFIG_HTTPD bool "httpd" default BUSYBOX_DEFAULT_HTTPD help - Serve web pages via an HTTP server. + HTTP server. config BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES bool "Support 'Ranges:' header" @@ -214,7 +212,7 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI when specific URLs are requested. config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR - bool "Support for running scripts through an interpreter" + bool "Support running scripts through an interpreter" default BUSYBOX_DEFAULT_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI help @@ -243,7 +241,7 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR "<Hello World>". config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES - bool "Support for custom error pages" + bool "Support custom error pages" default BUSYBOX_DEFAULT_FEATURE_HTTPD_ERROR_PAGES depends on BUSYBOX_CONFIG_HTTPD help @@ -256,7 +254,7 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES message. config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY - bool "Support for reverse proxy" + bool "Support reverse proxy" default BUSYBOX_DEFAULT_FEATURE_HTTPD_PROXY depends on BUSYBOX_CONFIG_HTTPD help @@ -268,7 +266,7 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY http://hostname[:port]/new/path/myfile. config BUSYBOX_CONFIG_FEATURE_HTTPD_GZIP - bool "Support for GZIP content encoding" + bool "Support GZIP content encoding" default BUSYBOX_DEFAULT_FEATURE_HTTPD_GZIP depends on BUSYBOX_CONFIG_HTTPD help @@ -383,14 +381,14 @@ config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP utilities, or enable these applets in Busybox. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4 - bool "Support for IPv4" + bool "Support IPv4" default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV4 depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN help If you want ifup/ifdown to talk IPv4, leave this on. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6 - bool "Support for IPv6" + bool "Support IPv6" default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV6 depends on (BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN) && BUSYBOX_CONFIG_FEATURE_IPV6 help @@ -406,7 +404,7 @@ config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING a weird network setup you don't need it. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP - bool "Support for external dhcp clients" + bool "Support external DHCP clients" default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_EXTERNAL_DHCP depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN help @@ -585,6 +583,11 @@ config BUSYBOX_CONFIG_IPCALC ipcalc takes an IP address and netmask and calculates the resulting broadcast, network, and host range. +config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS + bool "Enable long options" + default BUSYBOX_DEFAULT_FEATURE_IPCALC_LONG_OPTIONS + depends on BUSYBOX_CONFIG_IPCALC && BUSYBOX_CONFIG_LONG_OPTS + config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY bool "Fancy IPCALC, more options, adds 1 kbyte" default BUSYBOX_DEFAULT_FEATURE_IPCALC_FANCY @@ -592,13 +595,6 @@ config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY help Adds the options hostname, prefix and silent to the output of "ipcalc". - -config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS - bool "Enable long options" - default BUSYBOX_DEFAULT_FEATURE_IPCALC_LONG_OPTIONS - depends on BUSYBOX_CONFIG_IPCALC && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the ipcalc applet. config BUSYBOX_CONFIG_FAKEIDENTD bool "fakeidentd" default BUSYBOX_DEFAULT_FAKEIDENTD @@ -685,7 +681,7 @@ config BUSYBOX_CONFIG_NETSTAT netstat prints information about the Linux networking subsystem. config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE - bool "Enable wide netstat output" + bool "Enable wide output" default BUSYBOX_DEFAULT_FEATURE_NETSTAT_WIDE depends on BUSYBOX_CONFIG_NETSTAT help @@ -779,6 +775,12 @@ config BUSYBOX_CONFIG_SLATTACH help slattach is a small utility to attach network interfaces to serial lines. +config BUSYBOX_CONFIG_SSL_CLIENT + bool "ssl_client" + default BUSYBOX_DEFAULT_SSL_CLIENT + select BUSYBOX_CONFIG_TLS + help + This tool pipes data to/from a socket, TLS-encrypting it. config BUSYBOX_CONFIG_TCPSVD bool "tcpsvd" default BUSYBOX_DEFAULT_TCPSVD @@ -817,6 +819,11 @@ config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN remote host you are connecting to. This is useful when you need to log into a machine without telling the username (autologin). This option enables `-a' and `-l USER' arguments. + +config BUSYBOX_CONFIG_FEATURE_TELNET_WIDTH + bool "Enable window size autodetection" + default BUSYBOX_DEFAULT_FEATURE_TELNET_WIDTH + depends on BUSYBOX_CONFIG_TELNET config BUSYBOX_CONFIG_TELNETD bool "telnetd" default BUSYBOX_DEFAULT_TELNETD @@ -936,11 +943,9 @@ config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE "blksize" and "tsize" options. config BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR - bool "Enable tftp progress meter" + bool "Enable progress bar" default BUSYBOX_DEFAULT_FEATURE_TFTP_PROGRESS_BAR depends on BUSYBOX_CONFIG_TFTP && BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE - help - Show progress bar. config BUSYBOX_CONFIG_TFTP_DEBUG bool "Enable debug" @@ -949,6 +954,9 @@ config BUSYBOX_CONFIG_TFTP_DEBUG help Make tftp[d] print debugging messages on stderr. This is useful if you are diagnosing a bug in tftp[d]. +config BUSYBOX_CONFIG_TLS + bool #No description makes it a hidden option + default BUSYBOX_DEFAULT_TLS config BUSYBOX_CONFIG_TRACEROUTE bool "traceroute" default BUSYBOX_DEFAULT_TRACEROUTE @@ -975,8 +983,6 @@ config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP bool "Enable -I option (use ICMP instead of UDP)" default BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_USE_ICMP depends on BUSYBOX_CONFIG_TRACEROUTE || BUSYBOX_CONFIG_TRACEROUTE6 - help - Add option -I to use ICMP ECHO instead of UDP datagrams. config BUSYBOX_CONFIG_TUNCTL bool "tunctl" default BUSYBOX_DEFAULT_TUNCTL @@ -1004,12 +1010,15 @@ config BUSYBOX_CONFIG_WGET wget is a utility for non-interactive download of files from HTTP and FTP servers. +config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS + bool "Enable long options" + default BUSYBOX_DEFAULT_FEATURE_WGET_LONG_OPTIONS + depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS + config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR - bool "Enable a nifty process meter (+2k)" + bool "Enable progress bar (+2k)" default BUSYBOX_DEFAULT_FEATURE_WGET_STATUSBAR depends on BUSYBOX_CONFIG_WGET - help - Enable the transfer progress bar for wget transfers. config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION bool "Enable HTTP authentication" @@ -1018,13 +1027,6 @@ config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION help Support authenticated HTTP transfers. -config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS - bool "Enable long options" - default BUSYBOX_DEFAULT_FEATURE_WGET_LONG_OPTIONS - depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the wget applet. - config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT bool "Enable timeout option -T SEC" default BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT @@ -1039,18 +1041,59 @@ config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option will work in addition to -T. +config BUSYBOX_CONFIG_FEATURE_WGET_HTTPS + bool "Support HTTPS using internal TLS code" + default BUSYBOX_DEFAULT_FEATURE_WGET_HTTPS + depends on BUSYBOX_CONFIG_WGET + select BUSYBOX_CONFIG_TLS + help + wget will use internal TLS code to connect to https:// URLs. + Note: + On NOMMU machines, ssl_helper applet should be available + in the $PATH for this to work. Make sure to select that applet. + + Note: currently, TLS code only makes TLS I/O work, it + does *not* check that the peer is who it claims to be, etc. + IOW: it uses peer-supplied public keys to establish encryption + and signing keys, then encrypts and signs outgoing data and + decrypts incoming data. + It does not check signature hashes on the incoming data: + this means that attackers manipulating TCP packets can + send altered data and we unknowingly receive garbage. + (This check might be relatively easy to add). + It does not check public key's certificate: + this means that the peer may be an attacker impersonating + the server we think we are talking to. + + If you think this is unacceptable, consider this. As more and more + servers switch to HTTPS-only operation, without such "crippled" + TLS code it is *impossible* to simply download a kernel source + from kernel.org. Which can in real world translate into + "my small automatic tooling to build cross-compilers from sources + no longer works, I need to additionally keep a local copy + of ~4 megabyte source tarball of a SSL library and ~2 megabyte + source of wget, need to compile and built both before I can + download anything. All this despite the fact that the build + is done in a QEMU sandbox on a machine with absolutely nothing + worth stealing, so I don't care if someone would go to a lot + of trouble to intercept my HTTPS download to send me an altered + kernel tarball". + + If you still think this is unacceptable, send patches. + + If you still think this is unacceptable, do not want to send + patches, but do want to waste bandwidth expaining how wrong + it is, you will be ignored. + config BUSYBOX_CONFIG_FEATURE_WGET_OPENSSL bool "Try to connect to HTTPS using openssl" default BUSYBOX_DEFAULT_FEATURE_WGET_OPENSSL depends on BUSYBOX_CONFIG_WGET help - Choose how wget establishes SSL connection for https:// URLs. - - Busybox itself contains no SSL code. wget will spawn - a helper program to talk over HTTPS. + Try to use openssl to handle HTTPS. OpenSSL has a simple SSL client for debug purposes. - If you select "openssl" helper, wget will effectively run: + If you select this option, wget will effectively run: "openssl s_client -quiet -connect hostname:443 -servername hostname 2>/dev/null" and pipe its data through it. -servername is not used if hostname is numeric. @@ -1063,24 +1106,9 @@ config BUSYBOX_CONFIG_FEATURE_WGET_OPENSSL openssl is also a big binary, often dynamically linked against ~15 libraries. -config BUSYBOX_CONFIG_FEATURE_WGET_SSL_HELPER - bool "Try to connect to HTTPS using ssl_helper" - default BUSYBOX_DEFAULT_FEATURE_WGET_SSL_HELPER - depends on BUSYBOX_CONFIG_WGET - help - Choose how wget establishes SSL connection for https:// URLs. - - Busybox itself contains no SSL code. wget will spawn - a helper program to talk over HTTPS. - - ssl_helper is a tool which can be built statically - from busybox sources against a small embedded SSL library. - Please see networking/ssl_helper/README. - It does not require double host resolution and emits - error messages to stderr. - - Precompiled static binary may be available at - http://busybox.net/downloads/binaries/ + If openssl can't be executed, internal TLS code will be used + (if you enabled it); if openssl can be executed but fails later, + wget can't detect this, and download will fail. config BUSYBOX_CONFIG_WHOIS bool "whois" default BUSYBOX_DEFAULT_WHOIS diff --git a/package/utils/busybox/config/networking/udhcp/Config.in b/package/utils/busybox/config/networking/udhcp/Config.in index cdba5d5d17e3..e7a98750d2e3 100644 --- a/package/utils/busybox/config/networking/udhcp/Config.in +++ b/package/utils/busybox/config/networking/udhcp/Config.in @@ -5,36 +5,44 @@ # config BUSYBOX_CONFIG_UDHCPC6 - bool "udhcp client for DHCPv6 (udhcpc6)" + bool "udhcpc6 (DHCPv6 client, EXPERIMENTAL)" default BUSYBOX_DEFAULT_UDHCPC6 # not yet ready depends on BUSYBOX_CONFIG_FEATURE_IPV6 help udhcpc6 is a DHCPv6 client +config BUSYBOX_CONFIG_FEATURE_UDHCPC6_RFC3646 + bool "Support RFC 3646 (DNS server and search list)" + default BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC3646 + depends on BUSYBOX_CONFIG_UDHCPC6 + help + List of DNS servers and domain search list can be requested with + "-O dns" and "-O search". If server gives these values, + they will be set in environment variables "dns" and "search". + +config BUSYBOX_CONFIG_FEATURE_UDHCPC6_RFC4704 + bool "Support RFC 4704 (Client FQDN)" + default BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC4704 + depends on BUSYBOX_CONFIG_UDHCPC6 + help + You can request FQDN to be given by server using "-O fqdn". + +config BUSYBOX_CONFIG_FEATURE_UDHCPC6_RFC4833 + bool "Support RFC 4833 (Timezones)" + default BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC4833 + depends on BUSYBOX_CONFIG_UDHCPC6 + help + You can request POSIX timezone with "-O tz" and timezone name + with "-O timezone". + config BUSYBOX_CONFIG_UDHCPD - bool "udhcp server (udhcpd)" + bool "udhcpd (DHCP server)" default BUSYBOX_DEFAULT_UDHCPD select BUSYBOX_CONFIG_PLATFORM_LINUX help udhcpd is a DHCP server geared primarily toward embedded systems, while striving to be fully functional and RFC compliant. -config BUSYBOX_CONFIG_DHCPRELAY - bool "dhcprelay" - default BUSYBOX_DEFAULT_DHCPRELAY - help - dhcprelay listens for dhcp requests on one or more interfaces - and forwards these requests to a different interface or dhcp - server. - -config BUSYBOX_CONFIG_DUMPLEASES - bool "Lease display utility (dumpleases)" - default BUSYBOX_DEFAULT_DUMPLEASES - help - dumpleases displays the leases written out by the udhcpd server. - Lease times are stored in the file by time remaining in lease, or - by the absolute time that it expires in seconds from epoch. - config BUSYBOX_CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY bool "Rewrite the lease file at every new acknowledge" default BUSYBOX_DEFAULT_FEATURE_UDHCPD_WRITE_LEASES_EARLY @@ -67,8 +75,24 @@ config BUSYBOX_CONFIG_DHCPD_LEASES_FILE udhcpd stores addresses in a lease file. This is the absolute path of the file. Normally it is safe to leave it untouched. +config BUSYBOX_CONFIG_DUMPLEASES + bool "dumpleases" + default BUSYBOX_DEFAULT_DUMPLEASES + help + dumpleases displays the leases written out by the udhcpd. + Lease times are stored in the file by time remaining in lease, or + by the absolute time that it expires in seconds from epoch. + +config BUSYBOX_CONFIG_DHCPRELAY + bool "dhcprelay" + default BUSYBOX_DEFAULT_DHCPRELAY + help + dhcprelay listens for dhcp requests on one or more interfaces + and forwards these requests to a different interface or dhcp + server. + config BUSYBOX_CONFIG_UDHCPC - bool "udhcp client (udhcpc)" + bool "udhcpc (DHCP client)" default BUSYBOX_DEFAULT_UDHCPC select BUSYBOX_CONFIG_PLATFORM_LINUX help @@ -99,6 +123,15 @@ config BUSYBOX_CONFIG_FEATURE_UDHCPC_SANITIZEOPT they will be replaced with string "bad" when exporting to the environment. +config BUSYBOX_CONFIG_UDHCPC_DEFAULT_SCRIPT + string "Absolute path to config script" + default BUSYBOX_DEFAULT_UDHCPC_DEFAULT_SCRIPT + depends on BUSYBOX_CONFIG_UDHCPC + help + This script is called after udhcpc receives an answer. See + examples/udhcp for a working example. Normally it is safe + to leave this untouched. + config BUSYBOX_CONFIG_FEATURE_UDHCP_PORT bool "Enable '-P port' option for udhcpd and udhcpc" default BUSYBOX_DEFAULT_FEATURE_UDHCP_PORT @@ -120,7 +153,7 @@ config BUSYBOX_CONFIG_UDHCP_DEBUG are very verbose and useful for debugging only. config BUSYBOX_CONFIG_FEATURE_UDHCP_RFC3397 - bool "Support for RFC3397 domain search (experimental)" + bool "Support RFC3397 domain search (experimental)" default BUSYBOX_DEFAULT_FEATURE_UDHCP_RFC3397 depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC help @@ -129,22 +162,13 @@ config BUSYBOX_CONFIG_FEATURE_UDHCP_RFC3397 and SIP servers option 120, specified in RFC 3361. config BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q - bool "Support for 802.1Q VLAN parameters" + bool "Support 802.1Q VLAN parameters" default BUSYBOX_DEFAULT_FEATURE_UDHCP_8021Q depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC help If selected, both client and server will support passing of VLAN ID and priority via options 132 and 133 as per 802.1Q. -config BUSYBOX_CONFIG_UDHCPC_DEFAULT_SCRIPT - string "Absolute path to config script" - default BUSYBOX_DEFAULT_UDHCPC_DEFAULT_SCRIPT - depends on BUSYBOX_CONFIG_UDHCPC - help - This script is called after udhcpc receives an answer. See - examples/udhcp for a working example. Normally it is safe - to leave this untouched. - config BUSYBOX_CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS int "DHCP options slack buffer size" default BUSYBOX_DEFAULT_UDHCPC_SLACK_FOR_BUGGY_SERVERS diff --git a/package/utils/busybox/config/procps/Config.in b/package/utils/busybox/config/procps/Config.in index 6bc5ec058aff..acd4ed882b43 100644 --- a/package/utils/busybox/config/procps/Config.in +++ b/package/utils/busybox/config/procps/Config.in @@ -85,18 +85,18 @@ config BUSYBOX_CONFIG_PIDOF those id's on the standard output. config BUSYBOX_CONFIG_FEATURE_PIDOF_SINGLE - bool "Enable argument for single shot (-s)" + bool "Enable single shot (-s)" default BUSYBOX_DEFAULT_FEATURE_PIDOF_SINGLE depends on BUSYBOX_CONFIG_PIDOF help - Support argument '-s' for returning only the first pid found. + Support '-s' for returning only the first pid found. config BUSYBOX_CONFIG_FEATURE_PIDOF_OMIT - bool "Enable argument for omitting pids (-o)" + bool "Enable omitting pids (-o PID)" default BUSYBOX_DEFAULT_FEATURE_PIDOF_OMIT depends on BUSYBOX_CONFIG_PIDOF help - Support argument '-o' for omitting the given pids in output. + Support '-o PID' for omitting the given pid(s) in output. The special pid %PPID can be used to name the parent process of the pidof, in other words the calling shell or shell script. config BUSYBOX_CONFIG_PMAP @@ -109,6 +109,14 @@ config BUSYBOX_CONFIG_POWERTOP default BUSYBOX_DEFAULT_POWERTOP help Analyze power consumption on Intel-based laptops + +config BUSYBOX_CONFIG_FEATURE_POWERTOP_INTERACTIVE + bool "Accept keyboard commands" + default BUSYBOX_DEFAULT_FEATURE_POWERTOP_INTERACTIVE + depends on BUSYBOX_CONFIG_POWERTOP + help + Without this, powertop will only refresh display every 10 seconds. + No keyboard commands will work, only ^C to terminate. config BUSYBOX_CONFIG_PS bool "ps" default BUSYBOX_DEFAULT_PS @@ -133,19 +141,10 @@ config BUSYBOX_CONFIG_FEATURE_PS_LONG Adds fields PPID, RSS, START, TIME & TTY config BUSYBOX_CONFIG_FEATURE_PS_TIME - bool "Enable time and elapsed time output" + bool "Support -o time and -o etime output specifiers" default BUSYBOX_DEFAULT_FEATURE_PS_TIME depends on BUSYBOX_CONFIG_PS && BUSYBOX_CONFIG_DESKTOP select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Support -o time and -o etime output specifiers. - -config BUSYBOX_CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS - bool "Enable additional ps columns" - default BUSYBOX_DEFAULT_FEATURE_PS_ADDITIONAL_COLUMNS - depends on BUSYBOX_CONFIG_PS && BUSYBOX_CONFIG_DESKTOP - help - Support -o rgroup, -o ruser, -o nice output specifiers. config BUSYBOX_CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS bool "Support Linux prior to 2.4.0 and non-ELF systems" @@ -154,6 +153,11 @@ config BUSYBOX_CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS help Include support for measuring HZ on old kernels and non-ELF systems (if you are on Linux 2.4.0+ and use ELF, you don't need this) + +config BUSYBOX_CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS + bool "Support -o rgroup, -o ruser, -o nice specifiers" + default BUSYBOX_DEFAULT_FEATURE_PS_ADDITIONAL_COLUMNS + depends on BUSYBOX_CONFIG_PS && BUSYBOX_CONFIG_DESKTOP config BUSYBOX_CONFIG_PSTREE bool "pstree" default BUSYBOX_DEFAULT_PSTREE @@ -164,12 +168,6 @@ config BUSYBOX_CONFIG_PWDX default BUSYBOX_DEFAULT_PWDX help Report current working directory of a process -config BUSYBOX_CONFIG_RENICE - bool "renice" - default BUSYBOX_DEFAULT_RENICE - help - Renice alters the scheduling priority of one or more running - processes. config BUSYBOX_CONFIG_SMEMCAP bool "smemcap" default BUSYBOX_DEFAULT_SMEMCAP @@ -188,6 +186,14 @@ config BUSYBOX_CONFIG_TOP The top program provides a dynamic real-time view of a running system. +config BUSYBOX_CONFIG_FEATURE_TOP_INTERACTIVE + bool "Accept keyboard commands" + default BUSYBOX_DEFAULT_FEATURE_TOP_INTERACTIVE + depends on BUSYBOX_CONFIG_TOP + help + Without this, top will only refresh display every 5 seconds. + No keyboard commands will work, only ^C to terminate. + config BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE bool "Show CPU per-process usage percentage" default BUSYBOX_DEFAULT_FEATURE_TOP_CPU_USAGE_PERCENTAGE @@ -244,11 +250,11 @@ config BUSYBOX_CONFIG_UPTIME on, and the system load averages for the past 1, 5, and 15 minutes. config BUSYBOX_CONFIG_FEATURE_UPTIME_UTMP_SUPPORT - bool "Support for showing the number of users" + bool "Show the number of users" default BUSYBOX_DEFAULT_FEATURE_UPTIME_UTMP_SUPPORT depends on BUSYBOX_CONFIG_UPTIME && BUSYBOX_CONFIG_FEATURE_UTMP help - Makes uptime display the number of users currently logged on. + Display the number of users currently logged on. config BUSYBOX_CONFIG_WATCH bool "watch" default BUSYBOX_DEFAULT_WATCH @@ -257,7 +263,7 @@ config BUSYBOX_CONFIG_WATCH output to the screen. config BUSYBOX_CONFIG_FEATURE_SHOW_THREADS - bool "Support for showing threads in ps/pstree/top" + bool "Support thread display in ps/pstree/top" default BUSYBOX_DEFAULT_FEATURE_SHOW_THREADS depends on BUSYBOX_CONFIG_PS || BUSYBOX_CONFIG_TOP || BUSYBOX_CONFIG_PSTREE help diff --git a/package/utils/busybox/config/selinux/Config.in b/package/utils/busybox/config/selinux/Config.in index 1aac9f4ec57d..71eb0dcd776a 100644 --- a/package/utils/busybox/config/selinux/Config.in +++ b/package/utils/busybox/config/selinux/Config.in @@ -18,8 +18,6 @@ config BUSYBOX_CONFIG_FEATURE_CHCON_LONG_OPTIONS bool "Enable long options" default BUSYBOX_DEFAULT_FEATURE_CHCON_LONG_OPTIONS depends on BUSYBOX_CONFIG_CHCON && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the chcon applet. config BUSYBOX_CONFIG_GETENFORCE bool "getenforce" default BUSYBOX_DEFAULT_GETENFORCE @@ -56,8 +54,6 @@ config BUSYBOX_CONFIG_FEATURE_RUNCON_LONG_OPTIONS bool "Enable long options" default BUSYBOX_DEFAULT_FEATURE_RUNCON_LONG_OPTIONS depends on BUSYBOX_CONFIG_RUNCON && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the runcon applet. config BUSYBOX_CONFIG_SELINUXENABLED bool "selinuxenabled" default BUSYBOX_DEFAULT_SELINUXENABLED diff --git a/package/utils/busybox/config/shell/Config.in b/package/utils/busybox/config/shell/Config.in index 4193c1880646..e455d3832dc5 100644 --- a/package/utils/busybox/config/shell/Config.in +++ b/package/utils/busybox/config/shell/Config.in @@ -18,9 +18,19 @@ choice config BUSYBOX_CONFIG_SH_IS_ASH depends on !BUSYBOX_CONFIG_NOMMU bool "ash" + help + Choose ash to be the shell executed by 'sh' name. + The ash code will be built into busybox. If you don't select + "ash" choice (CONFIG_ASH), this shell may only be invoked by + the name 'sh' (and not 'ash'). config BUSYBOX_CONFIG_SH_IS_HUSH bool "hush" + help + Choose hush to be the shell executed by 'sh' name. + The hush code will be built into busybox. If you don't select + "hush" choice (CONFIG_HUSH), this shell may only be invoked by + the name 'sh' (and not 'hush'). config BUSYBOX_CONFIG_SH_IS_NONE bool "none" @@ -32,7 +42,8 @@ choice default BUSYBOX_CONFIG_BASH_IS_NONE help Choose which shell you want to be executed by 'bash' alias. - The ash shell is the most bash compatible and full featured one. + The ash shell is the most bash compatible and full featured one, + although compatibility is far from being complete. Note that selecting this option does not switch on any bash compatibility code. It merely makes it possible to install @@ -47,9 +58,19 @@ choice config BUSYBOX_CONFIG_BASH_IS_ASH depends on !BUSYBOX_CONFIG_NOMMU bool "ash" + help + Choose ash to be the shell executed by 'bash' name. + The ash code will be built into busybox. If you don't select + "ash" choice (CONFIG_ASH), this shell may only be invoked by + the name 'bash' (and not 'ash'). config BUSYBOX_CONFIG_BASH_IS_HUSH bool "hush" + help + Choose hush to be the shell executed by 'bash' name. + The hush code will be built into busybox. If you don't select + "hush" choice (CONFIG_HUSH), this shell may only be invoked by + the name 'bash' (and not 'hush'). config BUSYBOX_CONFIG_BASH_IS_NONE bool "none" @@ -68,12 +89,15 @@ config BUSYBOX_CONFIG_ASH shell (by Herbert Xu), which was created by porting the 'ash' shell (written by Kenneth Almquist) from NetBSD. +# ash options +# note: Don't remove !NOMMU part in the next line; it would break +# menuconfig's indenting. +if !NOMMU && (BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH) + config BUSYBOX_CONFIG_ASH_OPTIMIZE_FOR_SIZE bool "Optimize for size instead of speed" default BUSYBOX_DEFAULT_ASH_OPTIMIZE_FOR_SIZE depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH - help - Compile ash for reduced size at the price of speed. config BUSYBOX_CONFIG_ASH_INTERNAL_GLOB bool "Use internal glob() implementation" @@ -83,6 +107,23 @@ config BUSYBOX_CONFIG_ASH_INTERNAL_GLOB Do not use glob() function from libc, use internal implementation. Use this if you are getting "glob.h: No such file or directory" or similar build errors. + Note that as of now (2017-01), uclibc and musl glob() both have bugs + which would break ash if you select N here. + +config BUSYBOX_CONFIG_ASH_BASH_COMPAT + bool "bash-compatible extensions" + default BUSYBOX_DEFAULT_ASH_BASH_COMPAT + depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH + +config BUSYBOX_CONFIG_ASH_JOB_CONTROL + bool "Job control" + default BUSYBOX_DEFAULT_ASH_JOB_CONTROL + depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH + +config BUSYBOX_CONFIG_ASH_ALIAS + bool "Alias support" + default BUSYBOX_DEFAULT_ASH_ALIAS + depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH config BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT bool "Pseudorandom generator and $RANDOM variable" @@ -100,88 +141,62 @@ config BUSYBOX_CONFIG_ASH_EXPAND_PRMT default BUSYBOX_DEFAULT_ASH_EXPAND_PRMT depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH help - "PS#" may contain volatile content, such as backquote commands. + $PS# may contain volatile content, such as backquote commands. This option recreates the prompt string from the environment variable each time it is displayed. -config BUSYBOX_CONFIG_ASH_BASH_COMPAT - bool "bash-compatible extensions" - default BUSYBOX_DEFAULT_ASH_BASH_COMPAT - depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH - help - Enable bash-compatible extensions. - config BUSYBOX_CONFIG_ASH_IDLE_TIMEOUT - bool "Idle timeout variable" + bool "Idle timeout variable $TMOUT" default BUSYBOX_DEFAULT_ASH_IDLE_TIMEOUT depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH help - Enables bash-like auto-logout after $TMOUT seconds of idle time. + Enable bash-like auto-logout after $TMOUT seconds of idle time. -config BUSYBOX_CONFIG_ASH_JOB_CONTROL - bool "Job control" - default BUSYBOX_DEFAULT_ASH_JOB_CONTROL - depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH - help - Enable job control in the ash shell. - -config BUSYBOX_CONFIG_ASH_ALIAS - bool "Alias support" - default BUSYBOX_DEFAULT_ASH_ALIAS - depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH - help - Enable alias support in the ash shell. - -config BUSYBOX_CONFIG_ASH_GETOPTS - bool "Builtin getopt to parse positional parameters" - default BUSYBOX_DEFAULT_ASH_GETOPTS +config BUSYBOX_CONFIG_ASH_MAIL + bool "Check for new mail in interactive shell" + default BUSYBOX_DEFAULT_ASH_MAIL depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH help - Enable support for getopts builtin in ash. + Enable "check for new mail" function: + if set, $MAIL file and $MAILPATH list of files + are checked for mtime changes, and "you have mail" + message is printed if change is detected. -config BUSYBOX_CONFIG_ASH_BUILTIN_ECHO - bool "Builtin version of 'echo'" - default BUSYBOX_DEFAULT_ASH_BUILTIN_ECHO +config BUSYBOX_CONFIG_ASH_ECHO + bool "echo builtin" + default BUSYBOX_DEFAULT_ASH_ECHO depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH - help - Enable support for echo builtin in ash. -config BUSYBOX_CONFIG_ASH_BUILTIN_PRINTF - bool "Builtin version of 'printf'" - default BUSYBOX_DEFAULT_ASH_BUILTIN_PRINTF +config BUSYBOX_CONFIG_ASH_PRINTF + bool "printf builtin" + default BUSYBOX_DEFAULT_ASH_PRINTF depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH - help - Enable support for printf builtin in ash. -config BUSYBOX_CONFIG_ASH_BUILTIN_TEST - bool "Builtin version of 'test'" - default BUSYBOX_DEFAULT_ASH_BUILTIN_TEST +config BUSYBOX_CONFIG_ASH_TEST + bool "test builtin" + default BUSYBOX_DEFAULT_ASH_TEST depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH - help - Enable support for test builtin in ash. config BUSYBOX_CONFIG_ASH_HELP bool "help builtin" default BUSYBOX_DEFAULT_ASH_HELP depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH - help - Enable help builtin in ash. + +config BUSYBOX_CONFIG_ASH_GETOPTS + bool "getopts builtin" + default BUSYBOX_DEFAULT_ASH_GETOPTS + depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH config BUSYBOX_CONFIG_ASH_CMDCMD - bool "'command' command to override shell builtins" + bool "command builtin" default BUSYBOX_DEFAULT_ASH_CMDCMD depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH help - Enable support for the ash 'command' builtin, which allows - you to run the specified command with the specified arguments, - even when there is an ash builtin command with the same name. + Enable support for the 'command' builtin, which allows + you to run the specified command or builtin, + even when there is a function with the same name. -config BUSYBOX_CONFIG_ASH_MAIL - bool "Check for new mail on interactive shells" - default BUSYBOX_DEFAULT_ASH_MAIL - depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH - help - Enable "check for new mail" function in the ash shell. +endif # ash options config BUSYBOX_CONFIG_CTTYHACK bool "cttyhack" default BUSYBOX_DEFAULT_CTTYHACK @@ -243,8 +258,6 @@ config BUSYBOX_CONFIG_HUSH_BASH_COMPAT bool "bash-compatible extensions" default BUSYBOX_DEFAULT_HUSH_BASH_COMPAT depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH - help - Enable bash-compatible extensions. config BUSYBOX_CONFIG_HUSH_BRACE_EXPANSION bool "Brace expansion" @@ -253,13 +266,6 @@ config BUSYBOX_CONFIG_HUSH_BRACE_EXPANSION help Enable {abc,def} extension. -config BUSYBOX_CONFIG_HUSH_HELP - bool "help builtin" - default BUSYBOX_DEFAULT_HUSH_HELP - depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH - help - Enable help builtin in hush. Code size + ~1 kbyte. - config BUSYBOX_CONFIG_HUSH_INTERACTIVE bool "Interactive mode" default BUSYBOX_DEFAULT_HUSH_INTERACTIVE @@ -274,8 +280,6 @@ config BUSYBOX_CONFIG_HUSH_SAVEHISTORY bool "Save command history to .hush_history" default BUSYBOX_DEFAULT_HUSH_SAVEHISTORY depends on BUSYBOX_CONFIG_HUSH_INTERACTIVE && BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY - help - Enable history saving in hush. config BUSYBOX_CONFIG_HUSH_JOB bool "Job control" @@ -289,42 +293,38 @@ config BUSYBOX_CONFIG_HUSH_JOB but no separate process group is formed. config BUSYBOX_CONFIG_HUSH_TICK - bool "Process substitution" + bool "Support process substitution" default BUSYBOX_DEFAULT_HUSH_TICK depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH help - Enable process substitution `command` and $(command) in hush. + Enable `command` and $(command). config BUSYBOX_CONFIG_HUSH_IF bool "Support if/then/elif/else/fi" default BUSYBOX_DEFAULT_HUSH_IF depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH - help - Enable if/then/elif/else/fi in hush. config BUSYBOX_CONFIG_HUSH_LOOPS bool "Support for, while and until loops" default BUSYBOX_DEFAULT_HUSH_LOOPS depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH - help - Enable for, while and until loops in hush. config BUSYBOX_CONFIG_HUSH_CASE bool "Support case ... esac statement" default BUSYBOX_DEFAULT_HUSH_CASE depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH help - Enable case ... esac statement in hush. +400 bytes. + Enable case ... esac statement. +400 bytes. config BUSYBOX_CONFIG_HUSH_FUNCTIONS bool "Support funcname() { commands; } syntax" default BUSYBOX_DEFAULT_HUSH_FUNCTIONS depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH help - Enable support for shell functions in hush. +800 bytes. + Enable support for shell functions. +800 bytes. config BUSYBOX_CONFIG_HUSH_LOCAL - bool "Support local builtin" + bool "local builtin" default BUSYBOX_DEFAULT_HUSH_LOCAL depends on BUSYBOX_CONFIG_HUSH_FUNCTIONS help @@ -338,13 +338,6 @@ config BUSYBOX_CONFIG_HUSH_RANDOM_SUPPORT Enable pseudorandom generator and dynamic variable "$RANDOM". Each read of "$RANDOM" will generate a new pseudorandom value. -config BUSYBOX_CONFIG_HUSH_EXPORT_N - bool "Support 'export -n' option" - default BUSYBOX_DEFAULT_HUSH_EXPORT_N - depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH - help - export -n unexports variables. It is a bash extension. - config BUSYBOX_CONFIG_HUSH_MODE_X bool "Support 'hush -x' option and 'set -x' command" default BUSYBOX_DEFAULT_HUSH_MODE_X @@ -353,6 +346,88 @@ config BUSYBOX_CONFIG_HUSH_MODE_X This instructs hush to print commands before execution. Adds ~300 bytes. +config BUSYBOX_CONFIG_HUSH_ECHO + bool "echo builtin" + default BUSYBOX_DEFAULT_HUSH_ECHO + depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH + +config BUSYBOX_CONFIG_HUSH_PRINTF + bool "printf builtin" + default BUSYBOX_DEFAULT_HUSH_PRINTF + depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH + +config BUSYBOX_CONFIG_HUSH_TEST + bool "test builtin" + default BUSYBOX_DEFAULT_HUSH_TEST + depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH + +config BUSYBOX_CONFIG_HUSH_HELP + bool "help builtin" + default BUSYBOX_DEFAULT_HUSH_HELP + depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH + +config BUSYBOX_CONFIG_HUSH_EXPORT + bool "export builtin" + default BUSYBOX_DEFAULT_HUSH_EXPORT + depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH + +config BUSYBOX_CONFIG_HUSH_EXPORT_N + bool "Support 'export -n' option" + default BUSYBOX_DEFAULT_HUSH_EXPORT_N + depends on BUSYBOX_CONFIG_HUSH_EXPORT + help + export -n unexports variables. It is a bash extension. + +config BUSYBOX_CONFIG_HUSH_KILL + bool "kill builtin (supports kill %jobspec)" + default BUSYBOX_DEFAULT_HUSH_KILL + depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH + +config BUSYBOX_CONFIG_HUSH_WAIT + bool "wait builtin" + default BUSYBOX_DEFAULT_HUSH_WAIT + depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH + +config BUSYBOX_CONFIG_HUSH_TRAP + bool "trap builtin" + default BUSYBOX_DEFAULT_HUSH_TRAP + depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH + +config BUSYBOX_CONFIG_HUSH_TYPE + bool "type builtin" + default BUSYBOX_DEFAULT_HUSH_TYPE + depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH + +config BUSYBOX_CONFIG_HUSH_READ + bool "read builtin" + default BUSYBOX_DEFAULT_HUSH_READ + depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH + +config BUSYBOX_CONFIG_HUSH_SET + bool "set builtin" + default BUSYBOX_DEFAULT_HUSH_SET + depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH + +config BUSYBOX_CONFIG_HUSH_UNSET + bool "unset builtin" + default BUSYBOX_DEFAULT_HUSH_UNSET + depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH + +config BUSYBOX_CONFIG_HUSH_ULIMIT + bool "ulimit builtin" + default BUSYBOX_DEFAULT_HUSH_ULIMIT + depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH + +config BUSYBOX_CONFIG_HUSH_UMASK + bool "umask builtin" + default BUSYBOX_DEFAULT_HUSH_UMASK + depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH + +config BUSYBOX_CONFIG_HUSH_MEMLEAK + bool "memleak builtin (debugging)" + default BUSYBOX_DEFAULT_HUSH_MEMLEAK + depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH + config BUSYBOX_CONFIG_MSH bool "msh (deprecated: aliased to hush)" default BUSYBOX_DEFAULT_MSH @@ -361,6 +436,9 @@ config BUSYBOX_CONFIG_MSH msh is deprecated and will be removed, please migrate to hush. +comment "Options common to all shells" +if ASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH + config BUSYBOX_CONFIG_FEATURE_SH_MATH bool "POSIX math support" default BUSYBOX_DEFAULT_FEATURE_SH_MATH @@ -399,23 +477,11 @@ config BUSYBOX_CONFIG_FEATURE_SH_STANDALONE for use as a rescue shell, in the event that you screw up your system. This is implemented by re-execing /proc/self/exe (typically) - with right parameters. Some selected applets ("NOFORK" applets) - can even be executed without creating new process. - Instead, busybox will call _main() internally. - - However, this causes problems in chroot jails without mounted /proc - and with ps/top (command name can be shown as 'exe' for applets - started this way). -# untrue? -# Note that this will *also* cause applets to take precedence -# over shell builtins of the same name. So turning this on will -# eliminate any performance gained by turning on the builtin "echo" -# and "test" commands in ash. -# untrue? -# Note that when using this option, the shell will attempt to directly -# run '/bin/busybox'. If you do not have the busybox binary sitting in -# that exact location with that exact name, this option will not work at -# all. + with right parameters. + + However, there are drawbacks: it is problematic in chroot jails + without mounted /proc, and ps/top may show command name as 'exe' + for applets started this way. config BUSYBOX_CONFIG_FEATURE_SH_NOFORK bool "Run 'nofork' applets directly" @@ -444,5 +510,6 @@ config BUSYBOX_CONFIG_FEATURE_SH_HISTFILESIZE to set shell history size. Note that its max value is capped by "History size" setting in library tuning section. +endif # Options common to all shells endmenu diff --git a/package/utils/busybox/config/sysklogd/Config.in b/package/utils/busybox/config/sysklogd/Config.in index 1f8f3cf1608d..2045a7ae386f 100644 --- a/package/utils/busybox/config/sysklogd/Config.in +++ b/package/utils/busybox/config/sysklogd/Config.in @@ -58,7 +58,7 @@ config BUSYBOX_CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING default BUSYBOX_DEFAULT_FEATURE_LOGREAD_REDUCED_LOCKING depends on BUSYBOX_CONFIG_LOGREAD help - 'logread' ouput to slow serial terminals can have + 'logread' output to slow serial terminals can have side effects on syslog because of the semaphore. This option make logread to double buffer copy from circular buffer, minimizing semaphore diff --git a/package/utils/busybox/config/util-linux/Config.in b/package/utils/busybox/config/util-linux/Config.in index 8df023c35b43..74a49d00c2cc 100644 --- a/package/utils/busybox/config/util-linux/Config.in +++ b/package/utils/busybox/config/util-linux/Config.in @@ -54,6 +54,17 @@ config BUSYBOX_CONFIG_BLOCKDEV default BUSYBOX_DEFAULT_BLOCKDEV help Performs some ioctls with block devices. +config BUSYBOX_CONFIG_CAL + bool "cal" + default BUSYBOX_DEFAULT_CAL + help + cal is used to display a monthly calendar. +config BUSYBOX_CONFIG_CHRT + bool "chrt" + default BUSYBOX_DEFAULT_CHRT + help + manipulate real-time attributes of a process. + This requires sched_{g,s}etparam support in your libc. config BUSYBOX_CONFIG_DMESG bool "dmesg" default BUSYBOX_DEFAULT_DMESG @@ -68,7 +79,7 @@ config BUSYBOX_CONFIG_DMESG wish to enable the 'dmesg' utility. config BUSYBOX_CONFIG_FEATURE_DMESG_PRETTY - bool "Pretty dmesg output" + bool "Pretty output" default BUSYBOX_DEFAULT_FEATURE_DMESG_PRETTY depends on BUSYBOX_CONFIG_DMESG help @@ -87,6 +98,25 @@ config BUSYBOX_CONFIG_FEATURE_DMESG_PRETTY <5>Linux version 2.6.17.4 ..... <6>BIOS-provided physical RAM map: <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable) +config BUSYBOX_CONFIG_EJECT + bool "eject" + default BUSYBOX_DEFAULT_EJECT + select BUSYBOX_CONFIG_PLATFORM_LINUX + help + Used to eject cdroms. (defaults to /dev/cdrom) + +config BUSYBOX_CONFIG_FEATURE_EJECT_SCSI + bool "SCSI support" + default BUSYBOX_DEFAULT_FEATURE_EJECT_SCSI + depends on BUSYBOX_CONFIG_EJECT + help + Add the -s option to eject, this allows to eject SCSI-Devices and + usb-storage devices. +config BUSYBOX_CONFIG_FALLOCATE + bool "fallocate" + default BUSYBOX_DEFAULT_FALLOCATE + help + Preallocate space for files. config BUSYBOX_CONFIG_FATATTR bool "fatattr" default BUSYBOX_DEFAULT_FATATTR @@ -104,7 +134,7 @@ config BUSYBOX_CONFIG_FBSET if you wish to enable the 'fbset' utility. config BUSYBOX_CONFIG_FEATURE_FBSET_FANCY - bool "Turn on extra fbset options" + bool "Enable extra options" default BUSYBOX_DEFAULT_FEATURE_FBSET_FANCY depends on BUSYBOX_CONFIG_FBSET help @@ -114,7 +144,7 @@ config BUSYBOX_CONFIG_FEATURE_FBSET_FANCY options. config BUSYBOX_CONFIG_FEATURE_FBSET_READMODE - bool "Turn on fbset readmode support" + bool "Enable readmode support" default BUSYBOX_DEFAULT_FEATURE_FBSET_READMODE depends on BUSYBOX_CONFIG_FBSET help @@ -142,8 +172,6 @@ config BUSYBOX_CONFIG_FDISK_SUPPORT_LARGE_DISKS default BUSYBOX_DEFAULT_FDISK_SUPPORT_LARGE_DISKS depends on BUSYBOX_CONFIG_FDISK depends on !BUSYBOX_CONFIG_LFS # with LFS no special code is needed - help - Enable this option to support large disks > 4GB. config BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE bool "Write support" @@ -251,6 +279,13 @@ config BUSYBOX_CONFIG_FSCK_MINIX power goes off in the middle of a write. This utility allows you to check for and attempt to repair any corruption that occurs to a minix filesystem. +config BUSYBOX_CONFIG_FSFREEZE + bool "fsfreeze" + default BUSYBOX_DEFAULT_FSFREEZE + select BUSYBOX_CONFIG_PLATFORM_LINUX + select BUSYBOX_CONFIG_LONG_OPTS + help + Halt new accesses and flush writes on a mounted filesystem. config BUSYBOX_CONFIG_FSTRIM bool "fstrim" default BUSYBOX_DEFAULT_FSTRIM @@ -296,6 +331,12 @@ config BUSYBOX_CONFIG_HD default BUSYBOX_DEFAULT_HD help hd is an alias to hexdump -C. +config BUSYBOX_CONFIG_XXD + bool "xxd" + default BUSYBOX_DEFAULT_XXD + help + The xxd utility is used to display binary data in a readable + way that is comparable to the output from most hex editors. config BUSYBOX_CONFIG_HWCLOCK bool "hwclock" default BUSYBOX_DEFAULT_HWCLOCK @@ -310,10 +351,6 @@ config BUSYBOX_CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS bool "Support long options (--hctosys,...)" default BUSYBOX_DEFAULT_FEATURE_HWCLOCK_LONG_OPTIONS depends on BUSYBOX_CONFIG_HWCLOCK && BUSYBOX_CONFIG_LONG_OPTS - help - By default, the hwclock utility only uses short options. If you - are overly fond of its long options, such as --hctosys, --utc, etc) - then enable this option. config BUSYBOX_CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS bool "Use FHS /var/lib/hwclock/adjtime" @@ -326,6 +363,13 @@ config BUSYBOX_CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS classic /etc/adjtime path. pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO +config BUSYBOX_CONFIG_IONICE + bool "ionice" + default BUSYBOX_DEFAULT_IONICE + select BUSYBOX_CONFIG_PLATFORM_LINUX + help + Set/set program io scheduling class and priority + Requires kernel >= 2.6.13 config BUSYBOX_CONFIG_IPCRM bool "ipcrm" default BUSYBOX_DEFAULT_IPCRM @@ -340,6 +384,20 @@ config BUSYBOX_CONFIG_IPCS help The ipcs utility is used to provide information on the currently allocated System V interprocess (IPC) objects in the system. +config BUSYBOX_CONFIG_LAST + bool "last" + default BUSYBOX_DEFAULT_LAST + depends on BUSYBOX_CONFIG_FEATURE_WTMP + help + 'last' displays a list of the last users that logged into the system. + +config BUSYBOX_CONFIG_FEATURE_LAST_FANCY + bool "Output extra information" + default BUSYBOX_DEFAULT_FEATURE_LAST_FANCY + depends on BUSYBOX_CONFIG_LAST + help + 'last' displays detailed information about the last users that + logged into the system (mimics sysvinit last). +900 bytes. config BUSYBOX_CONFIG_LOSETUP bool "losetup" default BUSYBOX_DEFAULT_LOSETUP @@ -423,6 +481,24 @@ config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE These devices will request userspace look up the files in /lib/firmware/ and if it exists, send it to the kernel for loading into the hardware. +config BUSYBOX_CONFIG_MESG + bool "mesg" + default BUSYBOX_DEFAULT_MESG + help + Mesg controls access to your terminal by others. It is typically + used to allow or disallow other users to write to your terminal + +config BUSYBOX_CONFIG_FEATURE_MESG_ENABLE_ONLY_GROUP + bool "Enable writing to tty only by group, not by everybody" + default BUSYBOX_DEFAULT_FEATURE_MESG_ENABLE_ONLY_GROUP + depends on BUSYBOX_CONFIG_MESG + help + Usually, ttys are owned by group "tty", and "write" tool is + setgid to this group. This way, "mesg y" only needs to enable + "write by owning group" bit in tty mode. + + If you set this option to N, "mesg y" will enable writing + by anybody at all. This is not recommended. config BUSYBOX_CONFIG_MKE2FS bool "mke2fs" default BUSYBOX_DEFAULT_MKE2FS @@ -574,7 +650,7 @@ config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS config BUSYBOX_CONFIG_FEATURE_MOUNT_FLAGS depends on BUSYBOX_CONFIG_MOUNT - bool "Support lots of -o flags in mount" + bool "Support lots of -o flags" default BUSYBOX_DEFAULT_FEATURE_MOUNT_FLAGS help Without this, mount only supports ro/rw/remount. With this, it @@ -595,6 +671,11 @@ config BUSYBOX_CONFIG_FEATURE_MOUNT_OTHERTAB default BUSYBOX_DEFAULT_FEATURE_MOUNT_OTHERTAB help Support mount -T (specifying an alternate fstab) +config BUSYBOX_CONFIG_MOUNTPOINT + bool "mountpoint" + default BUSYBOX_DEFAULT_MOUNTPOINT + help + mountpoint checks if the directory is a mountpoint. config BUSYBOX_CONFIG_NSENTER bool "nsenter" default BUSYBOX_DEFAULT_NSENTER @@ -640,6 +721,12 @@ config BUSYBOX_CONFIG_READPROFILE #select PLATFORM_LINUX help This allows you to parse /proc/profile for basic profiling. +config BUSYBOX_CONFIG_RENICE + bool "renice" + default BUSYBOX_DEFAULT_RENICE + help + Renice alters the scheduling priority of one or more running + processes. config BUSYBOX_CONFIG_REV bool "rev" default BUSYBOX_DEFAULT_REV @@ -685,6 +772,19 @@ config BUSYBOX_CONFIG_LINUX64 select BUSYBOX_CONFIG_PLATFORM_LINUX help Alias to "setarch linux64". +config BUSYBOX_CONFIG_SETPRIV + bool "setpriv" + default BUSYBOX_DEFAULT_SETPRIV + select BUSYBOX_CONFIG_PLATFORM_LINUX + select BUSYBOX_CONFIG_LONG_OPTS + help + Run a program with different Linux privilege settings. + Requires kernel >= 3.5 +config BUSYBOX_CONFIG_SETSID + bool "setsid" + default BUSYBOX_DEFAULT_SETSID + help + setsid runs a program in a new session config BUSYBOX_CONFIG_SWAPON bool "swapon" default BUSYBOX_DEFAULT_SWAPON @@ -738,6 +838,21 @@ config BUSYBOX_CONFIG_SWITCH_ROOT * Because the Linux kernel uses rootfs internally as the starting and ending point for searching through the kernel's doubly linked list of active mount points. That's why. +config BUSYBOX_CONFIG_TASKSET + bool "taskset" + default BUSYBOX_DEFAULT_TASKSET + help + Retrieve or set a processes's CPU affinity. + This requires sched_{g,s}etaffinity support in your libc. + +config BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY + bool "Fancy output" + default BUSYBOX_DEFAULT_FEATURE_TASKSET_FANCY + depends on BUSYBOX_CONFIG_TASKSET + help + Needed for machines with more than 32-64 CPUs: + affinity parameter 0xHHHHHHHHHHHHHHHHHHHH can be arbitrarily long + in this case. Otherwise, it is limited to sizeof(long). config BUSYBOX_CONFIG_UEVENT bool "uevent" default BUSYBOX_DEFAULT_UEVENT @@ -764,10 +879,17 @@ config BUSYBOX_CONFIG_FEATURE_UMOUNT_ALL config BUSYBOX_CONFIG_UNSHARE bool "unshare" default BUSYBOX_DEFAULT_UNSHARE - depends on BUSYBOX_CONFIG_LONG_OPTS && !BUSYBOX_CONFIG_NOMMU + depends on !BUSYBOX_CONFIG_NOMMU select BUSYBOX_CONFIG_PLATFORM_LINUX + select BUSYBOX_CONFIG_LONG_OPTS help Run program with some namespaces unshared from parent. +config BUSYBOX_CONFIG_WALL + bool "wall" + default BUSYBOX_DEFAULT_WALL + depends on BUSYBOX_CONFIG_FEATURE_UTMP + help + Write a message to all users that are logged in. comment "Common options for mount/umount" depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT @@ -802,7 +924,7 @@ config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP_CREATE if it does not find a free one. config BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT - bool "Support for the old /etc/mtab file" + bool "Support old /etc/mtab file" default BUSYBOX_DEFAULT_FEATURE_MTAB_SUPPORT depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT select BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE diff --git a/package/utils/busybox/config/util-linux/volume_id/Config.in b/package/utils/busybox/config/util-linux/volume_id/Config.in index 49a57858471c..afbfa4ae5e3e 100644 --- a/package/utils/busybox/config/util-linux/volume_id/Config.in +++ b/package/utils/busybox/config/util-linux/volume_id/Config.in @@ -11,31 +11,18 @@ config BUSYBOX_CONFIG_VOLUMEID menu "Filesystem/Volume identification" depends on BUSYBOX_CONFIG_VOLUMEID - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_BCACHE bool "bcache filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_BCACHE depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_BTRFS bool "btrfs filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_BTRFS depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_CRAMFS bool "cramfs filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_CRAMFS depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_EXFAT bool "exFAT filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_EXFAT @@ -44,16 +31,10 @@ config BUSYBOX_CONFIG_FEATURE_VOLUMEID_EXFAT exFAT (extended FAT) is a proprietary file system designed especially for flash drives. It has many features from NTFS, but with less overhead. exFAT is used on most SDXC cards for consumer electronics. - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_EXT bool "Ext filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_EXT depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_F2FS bool "f2fs filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_F2FS @@ -63,64 +44,34 @@ config BUSYBOX_CONFIG_FEATURE_VOLUMEID_F2FS which is adapted to newer forms of storage. F2FS also remedies some known issues of the older log structured file systems, such as high cleaning overhead. - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_FAT bool "fat filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_FAT depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_HFS bool "hfs filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_HFS depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ISO9660 bool "iso9660 filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_ISO9660 depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_JFS bool "jfs filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_JFS depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXRAID bool "linuxraid" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LINUXRAID depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXSWAP bool "linux swap filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LINUXSWAP depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LUKS bool "luks filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LUKS depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_NILFS bool "nilfs filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_NILFS @@ -136,40 +87,22 @@ config BUSYBOX_CONFIG_FEATURE_VOLUMEID_NILFS SOX compliance logging, and so forth. It can serve as an alternative filesystem for Linux desktop environment, or as a basis of advanced storage appliances. - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_NTFS bool "ntfs filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_NTFS depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_OCFS2 bool "ocfs2 filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_OCFS2 depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_REISERFS bool "Reiser filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_REISERFS depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ROMFS bool "romfs filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_ROMFS depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_SQUASHFS bool "SquashFS filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_SQUASHFS @@ -179,16 +112,10 @@ config BUSYBOX_CONFIG_FEATURE_VOLUMEID_SQUASHFS intended for general read-only filesystem use and in constrained block device/memory systems (e.g. embedded systems) where low overhead is needed. - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_SYSV bool "sysv filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_SYSV depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_UBIFS bool "UBIFS filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_UBIFS @@ -196,126 +123,65 @@ config BUSYBOX_CONFIG_FEATURE_VOLUMEID_UBIFS help UBIFS (Unsorted Block Image File System) is a file system for use with raw flash memory media. - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_UDF bool "udf filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_UDF depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - - ### config FEATURE_VOLUMEID_HIGHPOINTRAID ### bool "highpoint raid" ### default y ### depends on VOLUMEID -### help -### TODO - - ### config FEATURE_VOLUMEID_HPFS ### bool "hpfs filesystem" ### default y ### depends on VOLUMEID -### help -### TODO - - ### config FEATURE_VOLUMEID_ISWRAID ### bool "intel raid" ### default y ### depends on VOLUMEID -### help -### TODO - - ### config FEATURE_VOLUMEID_LSIRAID ### bool "lsi raid" ### default y ### depends on VOLUMEID -### help -### TODO - - ### config FEATURE_VOLUMEID_LVM ### bool "lvm" ### default y ### depends on VOLUMEID -### help -### TODO - - ### config FEATURE_VOLUMEID_MAC ### bool "mac filesystem" ### default y ### depends on VOLUMEID -### help -### TODO - - ### config FEATURE_VOLUMEID_MINIX ### bool "minix filesystem" ### default y ### depends on VOLUMEID -### help -### TODO - - ### config FEATURE_VOLUMEID_MSDOS ### bool "msdos filesystem" ### default y ### depends on VOLUMEID -### help -### TODO - - ### config FEATURE_VOLUMEID_NVIDIARAID ### bool "nvidia raid" ### default y ### depends on VOLUMEID -### help -### TODO - - ### config FEATURE_VOLUMEID_PROMISERAID ### bool "promise raid" ### default y ### depends on VOLUMEID -### help -### TODO - - ### config FEATURE_VOLUMEID_SILICONRAID ### bool "silicon raid" ### default y ### depends on VOLUMEID -### help -### TODO - - ### config FEATURE_VOLUMEID_UFS ### bool "ufs filesystem" ### default y ### depends on VOLUMEID -### help -### TODO - - ### config FEATURE_VOLUMEID_VIARAID ### bool "via raid" ### default y ### depends on VOLUMEID -### help -### TODO - - config BUSYBOX_CONFIG_FEATURE_VOLUMEID_XFS bool "xfs filesystem" default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_XFS depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - endmenu diff --git a/package/utils/busybox/patches/120-remove_uclibc_rpc_check.patch b/package/utils/busybox/patches/120-remove_uclibc_rpc_check.patch deleted file mode 100644 index 682a68eebd7d..000000000000 --- a/package/utils/busybox/patches/120-remove_uclibc_rpc_check.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/util-linux/mount.c -+++ b/util-linux/mount.c -@@ -245,9 +245,6 @@ - #if ENABLE_FEATURE_MOUNT_NFS - /* This is just a warning of a common mistake. Possibly this should be a - * uclibc faq entry rather than in busybox... */ --# if defined(__UCLIBC__) && ! defined(__UCLIBC_HAS_RPC__) --# error "You need to build uClibc with UCLIBC_HAS_RPC for NFS support" --# endif - # include - # include - # include diff --git a/package/utils/busybox/patches/200-udhcpc_reduce_msgs.patch b/package/utils/busybox/patches/200-udhcpc_reduce_msgs.patch index 8ef8f2211b6a..5f64c19d05a5 100644 --- a/package/utils/busybox/patches/200-udhcpc_reduce_msgs.patch +++ b/package/utils/busybox/patches/200-udhcpc_reduce_msgs.patch @@ -1,6 +1,6 @@ --- a/networking/udhcp/dhcpc.c +++ b/networking/udhcp/dhcpc.c -@@ -704,6 +704,7 @@ static int bcast_or_ucast(struct dhcp_pa +@@ -706,6 +706,7 @@ static int bcast_or_ucast(struct dhcp_pa static NOINLINE int send_discover(uint32_t xid, uint32_t requested) { struct dhcp_packet packet; @@ -8,7 +8,7 @@ /* Fill in: op, htype, hlen, cookie, chaddr fields, * random xid field (we override it below), -@@ -721,6 +722,7 @@ static NOINLINE int send_discover(uint32 +@@ -723,6 +724,7 @@ static NOINLINE int send_discover(uint32 */ add_client_options(&packet); diff --git a/package/utils/busybox/patches/201-udhcpc_changed_ifindex.patch b/package/utils/busybox/patches/201-udhcpc_changed_ifindex.patch index f5e3a075aed1..727f69409c9b 100644 --- a/package/utils/busybox/patches/201-udhcpc_changed_ifindex.patch +++ b/package/utils/busybox/patches/201-udhcpc_changed_ifindex.patch @@ -1,6 +1,6 @@ --- a/networking/udhcp/dhcpc.c +++ b/networking/udhcp/dhcpc.c -@@ -1439,6 +1439,12 @@ int udhcpc_main(int argc UNUSED_PARAM, c +@@ -1442,6 +1442,12 @@ int udhcpc_main(int argc UNUSED_PARAM, c /* silence "uninitialized!" warning */ unsigned timestamp_before_wait = timestamp_before_wait; diff --git a/package/utils/busybox/patches/203-udhcpc_renew_no_deconfig.patch b/package/utils/busybox/patches/203-udhcpc_renew_no_deconfig.patch index 3df8d930b1dc..7b77d2970b9d 100644 --- a/package/utils/busybox/patches/203-udhcpc_renew_no_deconfig.patch +++ b/package/utils/busybox/patches/203-udhcpc_renew_no_deconfig.patch @@ -1,6 +1,6 @@ --- a/networking/udhcp/dhcpc.c +++ b/networking/udhcp/dhcpc.c -@@ -1110,7 +1110,6 @@ static void perform_renew(void) +@@ -1112,7 +1112,6 @@ static void perform_renew(void) state = RENEW_REQUESTED; break; case RENEW_REQUESTED: /* impatient are we? fine, square 1 */ diff --git a/package/utils/busybox/patches/301-ip-link-fix-netlink-msg-size.patch b/package/utils/busybox/patches/301-ip-link-fix-netlink-msg-size.patch index 360324bf7cf5..ca76c44cc808 100644 --- a/package/utils/busybox/patches/301-ip-link-fix-netlink-msg-size.patch +++ b/package/utils/busybox/patches/301-ip-link-fix-netlink-msg-size.patch @@ -1,6 +1,6 @@ --- a/networking/libiproute/iplink.c +++ b/networking/libiproute/iplink.c -@@ -470,7 +470,7 @@ static int do_add_or_delete(char **argv, +@@ -598,7 +598,7 @@ static int do_add_or_delete(char **argv, } xrtnl_open(&rth); ll_init_map(&rth); diff --git a/package/utils/busybox/patches/302-ip-rule-add-suppress-prefixlength.patch b/package/utils/busybox/patches/302-ip-rule-add-suppress-prefixlength.patch deleted file mode 100644 index 7b4797505e2f..000000000000 --- a/package/utils/busybox/patches/302-ip-rule-add-suppress-prefixlength.patch +++ /dev/null @@ -1,145 +0,0 @@ -From dbac30c3784c267bbe44a2a3ebed4e827c8fe82a Mon Sep 17 00:00:00 2001 -From: Stefan Tomanek -Date: Tue, 13 Jun 2017 19:06:09 +0200 -Subject: [PATCH] ip rule: add suppress_{prefixlength,ifgroup} options - -(cherry-picked from 192dce4b84fb32346ebc5194de7daa5da3b8d1b4) - -function old new delta -iprule_modify 816 887 +71 -print_rule 610 680 +70 ------------------------------------------------------------------------------- -(add/remove: 0/0 grow/shrink: 2/0 up/down: 141/0) Total: 141 bytes - -Signed-off-by: Stefan Tomanek -Signed-off-by: Denys Vlasenko ---- - networking/libiproute/iprule.c | 73 ++++++++++++++++++++++++++---------------- - 1 file changed, 46 insertions(+), 27 deletions(-) - ---- a/networking/libiproute/iprule.c -+++ b/networking/libiproute/iprule.c -@@ -17,25 +17,32 @@ - #include - #include - -+/* from : */ -+#define FRA_SUPPRESS_IFGROUP 13 -+#define FRA_SUPPRESS_PREFIXLEN 14 -+ - #include "ip_common.h" /* #include "libbb.h" is inside */ - #include "rt_names.h" - #include "utils.h" - --/* --static void usage(void) __attribute__((noreturn)); -- --static void usage(void) --{ -- fprintf(stderr, "Usage: ip rule [ list | add | del ] SELECTOR ACTION\n"); -- fprintf(stderr, "SELECTOR := [ from PREFIX ] [ to PREFIX ] [ tos TOS ] [ fwmark FWMARK ]\n"); -- fprintf(stderr, " [ dev STRING ] [ pref NUMBER ]\n"); -- fprintf(stderr, "ACTION := [ table TABLE_ID ] [ nat ADDRESS ]\n"); -- fprintf(stderr, " [ prohibit | reject | unreachable ]\n"); -- fprintf(stderr, " [ realms [SRCREALM/]DSTREALM ]\n"); -- fprintf(stderr, "TABLE_ID := [ local | main | default | NUMBER ]\n"); -- exit(-1); --} --*/ -+/* If you add stuff here, update iprule_full_usage */ -+static const char keywords[] ALIGN1 = -+ "from\0""to\0""preference\0""order\0""priority\0" -+ "tos\0""fwmark\0""realms\0""table\0""lookup\0" -+ "suppress_prefixlength\0""suppress_ifgroup\0" -+ "dev\0""iif\0""nat\0""map-to\0""type\0""help\0" -+ ; -+#define keyword_preference (keywords + sizeof("from") + sizeof("to")) -+#define keyword_fwmark (keyword_preference + sizeof("preference") + sizeof("order") + sizeof("priority") + sizeof("tos")) -+#define keyword_realms (keyword_fwmark + sizeof("fwmark")) -+#define keyword_suppress_prefixlength (keyword_realms + sizeof("realms") + sizeof("table") + sizeof("lookup")) -+#define keyword_suppress_ifgroup (keyword_suppress_prefixlength + sizeof("suppress_prefixlength")) -+enum { -+ ARG_from = 1, ARG_to, ARG_preference, ARG_order, ARG_priority, -+ ARG_tos, ARG_fwmark, ARG_realms, ARG_table, ARG_lookup, -+ ARG_suppress_prefixlength, ARG_suppress_ifgroup, -+ ARG_dev, ARG_iif, ARG_nat, ARG_map_to, ARG_type, ARG_help, -+}; - - static int FAST_FUNC print_rule(const struct sockaddr_nl *who UNUSED_PARAM, - struct nlmsghdr *n, void *arg UNUSED_PARAM) -@@ -119,6 +126,17 @@ static int FAST_FUNC print_rule(const st - else if (r->rtm_table) - printf("lookup %s ", rtnl_rttable_n2a(r->rtm_table)); - -+ if (tb[FRA_SUPPRESS_PREFIXLEN]) { -+ int pl = *(uint32_t*)RTA_DATA(tb[FRA_SUPPRESS_PREFIXLEN]); -+ if (pl != -1) -+ printf("%s %d ", keyword_suppress_prefixlength, pl); -+ } -+ if (tb[FRA_SUPPRESS_IFGROUP]) { -+ int grp = *(uint32_t*)RTA_DATA(tb[FRA_SUPPRESS_IFGROUP]); -+ if (grp != -1) -+ printf("%s %d ", keyword_suppress_ifgroup, grp); -+ } -+ - if (tb[RTA_FLOW]) { - uint32_t to = *(uint32_t*)RTA_DATA(tb[RTA_FLOW]); - uint32_t from = to>>16; -@@ -174,15 +192,6 @@ static int iprule_list(char **argv) - /* Return value becomes exitcode. It's okay to not return at all */ - static int iprule_modify(int cmd, char **argv) - { -- static const char keywords[] ALIGN1 = -- "from\0""to\0""preference\0""order\0""priority\0" -- "tos\0""fwmark\0""realms\0""table\0""lookup\0""dev\0" -- "iif\0""nat\0""map-to\0""type\0""help\0"; -- enum { -- ARG_from = 1, ARG_to, ARG_preference, ARG_order, ARG_priority, -- ARG_tos, ARG_fwmark, ARG_realms, ARG_table, ARG_lookup, ARG_dev, -- ARG_iif, ARG_nat, ARG_map_to, ARG_type, ARG_help -- }; - bool table_ok = 0; - struct rtnl_handle rth; - struct { -@@ -232,7 +241,7 @@ static int iprule_modify(int cmd, char * - ) { - uint32_t pref; - NEXT_ARG(); -- pref = get_u32(*argv, "preference"); -+ pref = get_u32(*argv, keyword_preference); - addattr32(&req.n, sizeof(req), RTA_PRIORITY, pref); - } else if (key == ARG_tos) { - uint32_t tos; -@@ -243,13 +252,13 @@ static int iprule_modify(int cmd, char * - } else if (key == ARG_fwmark) { - uint32_t fwmark; - NEXT_ARG(); -- fwmark = get_u32(*argv, "fwmark"); -+ fwmark = get_u32(*argv, keyword_fwmark); - addattr32(&req.n, sizeof(req), RTA_PROTOINFO, fwmark); - } else if (key == ARG_realms) { - uint32_t realm; - NEXT_ARG(); - if (get_rt_realms(&realm, *argv)) -- invarg_1_to_2(*argv, "realms"); -+ invarg_1_to_2(*argv, keyword_realms); - addattr32(&req.n, sizeof(req), RTA_FLOW, realm); - } else if (key == ARG_table || - key == ARG_lookup -@@ -265,6 +274,16 @@ static int iprule_modify(int cmd, char * - addattr32(&req.n, sizeof(req), RTA_TABLE, tid); - } - table_ok = 1; -+ } else if (key == ARG_suppress_prefixlength) { -+ int prefix_length; -+ NEXT_ARG(); -+ prefix_length = get_u32(*argv, keyword_suppress_prefixlength); -+ addattr32(&req.n, sizeof(req), FRA_SUPPRESS_PREFIXLEN, prefix_length); -+ } else if (key == ARG_suppress_ifgroup) { -+ int grp; -+ NEXT_ARG(); -+ grp = get_u32(*argv, keyword_suppress_ifgroup); -+ addattr32(&req.n, sizeof(req), FRA_SUPPRESS_IFGROUP, grp); - } else if (key == ARG_dev || - key == ARG_iif - ) { diff --git a/package/utils/busybox/patches/401-vi-don-t-touch-file-with-x-when-modified_count-0.patch b/package/utils/busybox/patches/401-vi-don-t-touch-file-with-x-when-modified_count-0.patch deleted file mode 100644 index e83999d3038a..000000000000 --- a/package/utils/busybox/patches/401-vi-don-t-touch-file-with-x-when-modified_count-0.patch +++ /dev/null @@ -1,100 +0,0 @@ -From e88608eae24ae5934034e1ecb6c494fefbf1b9ae Mon Sep 17 00:00:00 2001 -From: Denys Vlasenko -Date: Mon, 13 Mar 2017 20:50:42 +0100 -Subject: [PATCH 1/2] vi: don't touch file with :x when modified_count == 0 - -Along with it, there are other changes - - - Check for uppercase X is removed as the expression will be always false and - :X itself is another totally different command in standard vim - - The status line will show number of written lines instead of lines requested - by the colon command. This is also how the standard vim is doing, though - the difference is that '!' has to be explicitly specified in vim to allow - partial writes - -Signed-off-by: Yousong Zhou -Signed-off-by: Denys Vlasenko ---- - editors/vi.c | 43 ++++++++++++++++++++++++++----------------- - 1 file changed, 26 insertions(+), 17 deletions(-) - ---- a/editors/vi.c -+++ b/editors/vi.c -@@ -1038,7 +1038,9 @@ static void colon(char *buf) - || strncmp(p, "wn", cnt) == 0 - || (p[0] == 'x' && !p[1]) - ) { -- cnt = file_write(current_filename, text, end - 1); -+ if (modified_count != 0 || p[0] != 'x') { -+ cnt = file_write(current_filename, text, end - 1); -+ } - if (cnt < 0) { - if (cnt == -1) - status_line_bold("Write error: %s", strerror(errno)); -@@ -1049,8 +1051,9 @@ static void colon(char *buf) - current_filename, - count_lines(text, end - 1), cnt - ); -- if (p[0] == 'x' || p[1] == 'q' || p[1] == 'n' -- || p[0] == 'X' || p[1] == 'Q' || p[1] == 'N' -+ if (p[0] == 'x' -+ || p[1] == 'q' || p[1] == 'n' -+ || p[1] == 'Q' || p[1] == 'N' - ) { - editing = 0; - } -@@ -1480,16 +1483,19 @@ static void colon(char *buf) - goto ret; - } - #endif -- // how many lines in text[]? -- li = count_lines(q, r); -- size = r - q + 1; - //if (useforce) { - // if "fn" is not write-able, chmod u+w - // sprintf(syscmd, "chmod u+w %s", fn); - // system(syscmd); - // forced = TRUE; - //} -- l = file_write(fn, q, r); -+ if (modified_count != 0 || cmd[0] != 'x') { -+ size = r - q + 1; -+ l = file_write(fn, q, r); -+ } else { -+ size = 0; -+ l = 0; -+ } - //if (useforce && forced) { - // chmod u-w - // sprintf(syscmd, "chmod u-w %s", fn); -@@ -1500,17 +1506,20 @@ static void colon(char *buf) - if (l == -1) - status_line_bold_errno(fn); - } else { -+ // how many lines written -+ li = count_lines(q, q + l - 1); - status_line("'%s' %dL, %dC", fn, li, l); -- if (q == text && r == end - 1 && l == size) { -- modified_count = 0; -- last_modified_count = -1; -- } -- if ((cmd[0] == 'x' || cmd[1] == 'q' || cmd[1] == 'n' -- || cmd[0] == 'X' || cmd[1] == 'Q' || cmd[1] == 'N' -- ) -- && l == size -- ) { -- editing = 0; -+ if (l == size) { -+ if (q == text && q + l == end) { -+ modified_count = 0; -+ last_modified_count = -1; -+ } -+ if (cmd[0] == 'x' -+ || cmd[1] == 'q' || cmd[1] == 'n' -+ || cmd[1] == 'Q' || cmd[1] == 'N' -+ ) { -+ editing = 0; -+ } - } - } - #if ENABLE_FEATURE_VI_YANKMARK diff --git a/package/utils/busybox/patches/402-vi-avoid-touching-a-new-file-with-ZZ-when-no-editing.patch b/package/utils/busybox/patches/402-vi-avoid-touching-a-new-file-with-ZZ-when-no-editing.patch deleted file mode 100644 index b56cf735c25a..000000000000 --- a/package/utils/busybox/patches/402-vi-avoid-touching-a-new-file-with-ZZ-when-no-editing.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 8f3bf4f0d3605b50a8e4c48c89aeabc455f04884 Mon Sep 17 00:00:00 2001 -From: Yousong Zhou -Date: Fri, 24 Mar 2017 21:13:10 +0100 -Subject: [PATCH 2/2] vi: avoid touching a new file with ZZ when no editing has - been done - -This is the behaviour observed with standard vim and busybox vi of at -least 1.22.1. It was changed with commit "32afd3a vi: some -simplifications" which happened before 1.23.0. - -Mistyping filename on command line happens fairly often and it's better -we restore the old behaviour to avoid a few unnecessary flash writes and -sometimes efforts of debugging bugs caused by those unneeded stray -files. - -Signed-off-by: Yousong Zhou -Signed-off-by: Denys Vlasenko ---- - editors/vi.c | 16 ++++++++-------- - 1 file changed, 8 insertions(+), 8 deletions(-) - ---- a/editors/vi.c -+++ b/editors/vi.c -@@ -719,14 +719,6 @@ static int init_text_buffer(char *fn) - { - int rc; - -- flush_undo_data(); -- modified_count = 0; -- last_modified_count = -1; --#if ENABLE_FEATURE_VI_YANKMARK -- /* init the marks */ -- memset(mark, 0, sizeof(mark)); --#endif -- - /* allocate/reallocate text buffer */ - free(text); - text_size = 10240; -@@ -741,6 +733,14 @@ static int init_text_buffer(char *fn) - // file doesnt exist. Start empty buf with dummy line - char_insert(text, '\n', NO_UNDO); - } -+ -+ flush_undo_data(); -+ modified_count = 0; -+ last_modified_count = -1; -+#if ENABLE_FEATURE_VI_YANKMARK -+ /* init the marks */ -+ memset(mark, 0, sizeof(mark)); -+#endif - return rc; - } -