From: Gabor Juhos Date: Fri, 17 Aug 2012 17:56:05 +0000 (+0000) Subject: ramips: add support for D-Link DIR-615 H1 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=89606b61b1feaf9e9ba5b7344883a6bae30f8485;p=openwrt%2Fstaging%2Fnbd.git ramips: add support for D-Link DIR-615 H1 rt2x00 still needs some patching as the radio doesn't come to life. Installation via webflash. [juhosg: fix whitespace issues, remove rt305x_register_usb from machine setup because the board has no USB port] Signed-off-by: Mikko Hissa SVN-Revision: 33205 --- diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index b426693422..6c86513755 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -36,7 +36,7 @@ get_status_led() { argus-atp52b) status_led="argus-atp52b:green:run" ;; - dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-620-a1) + dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-615-h1 | dir-620-a1) status_led="d-link:green:status" ;; dap-1350) diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 392a8e1da3..2a405195c8 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -57,6 +57,7 @@ case "$FIRMWARE" in all5002 | \ argus-atp52b | \ bc2 | \ + dir-615-h1 | \ dir-620-a1 | \ esr-9753 | \ fonera20n | \ diff --git a/target/linux/ramips/base-files/etc/uci-defaults/leds b/target/linux/ramips/base-files/etc/uci-defaults/leds index 21804c74a2..32fae2507c 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/leds +++ b/target/linux/ramips/base-files/etc/uci-defaults/leds @@ -32,6 +32,10 @@ case $board in ucidef_set_led_default "wan" "WAN LED (amber)" "d-link:amber:wan" "1" set_wifi_led "rt2800pci-phy0::radio" ;; + dir-615-h1) + ucidef_set_led_default "status" "Status LED (amber)" "d-link:amber:status" "0" + set_wifi_led "rt2800pci-phy0::radio" + ;; esr-9753) set_wifi_led "rt2800pci-phy0::radio" ;; diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network index cbb0b85ff4..e7e93345a0 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/network +++ b/target/linux/ramips/base-files/etc/uci-defaults/network @@ -18,6 +18,7 @@ ramips_setup_interfaces() case $board in all0256n | \ all5002 | \ + dir-615-h1 | \ wl-330n) ucidef_set_interface_lan "eth0.1" ;; @@ -89,7 +90,8 @@ ramips_setup_macs() case $board in all0256n | \ - all5002) + all5002 | \ + dir-615-h1) lan_mac=$(ramips_get_mac_binary factory 40) ;; 3g-6200n | \ diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac index a6c88ed961..7709b3b474 100644 --- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac @@ -35,7 +35,8 @@ preinit_set_mac_address() { ifconfig eth0 hw ether $mac 2>/dev/null ;; all0256n |\ - all5002 | \ + all5002 |\ + dir-615-h1 |\ fonera20n |\ hw550-3g |\ nbg-419n |\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 8dcda484a6..fb2a573bf3 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -83,6 +83,9 @@ ramips_board_name() { *"DIR-620 A1") name="dir-620-a1" ;; + *"DIR-615 H1") + name="dir-615-h1" + ;; *"DAP-1350") name="dap-1350" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 2548e1d6da..1b5d546439 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -21,6 +21,7 @@ platform_check_image() { dir-300-b1 | \ dir-600-b1 | \ dir-600-b2 | \ + dir-615-h1 | \ dir-620-a1 | \ dap-1350 | \ esr-9753 | \ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index 2de19d799a..d09bd4101d 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -63,6 +63,7 @@ enum ramips_mach_type { /* RT3352 based machines */ RAMIPS_MACH_ALL5002, /* Allnet ALL5002 */ + RAMIPS_MACH_DIR_615_H1, /* RT3662 based machines */ RAMIPS_MACH_RT_N56U, /* Asus RT-N56U */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig index 48745ae5d6..5837196f6e 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig @@ -16,7 +16,7 @@ config RT305X_MACH_ALL0256N bool "Allnet ALL0256N support" select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_LEDS - + config RT305X_MACH_ALL5002 bool "Allnet ALL5002 support" select RALINK_DEV_GPIO_BUTTONS @@ -71,6 +71,11 @@ config RT305X_MACH_DIR_300_REVB select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_LEDS +config RT305X_MACH_DIR_615_H1 + bool "D-Link DIR-615 H1 board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT305X_MACH_DAP_1350 bool "D-Link DAP-1350 board support" select RALINK_DEV_GPIO_BUTTONS diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile index e5035e2e66..0dcb1f9e3d 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_RT305X_MACH_BC2) += mach-bc2.o obj-$(CONFIG_RT305X_MACH_ALL0256N) += mach-all0256n.o obj-$(CONFIG_RT305X_MACH_ALL5002) += mach-all5002.o obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o +obj-$(CONFIG_RT305X_MACH_DIR_615_H1) += mach-dir-615-h1.o obj-$(CONFIG_RT305X_MACH_DAP_1350) += mach-dap-1350.o obj-$(CONFIG_RT305X_MACH_ESR_9753) += mach-esr-9753.o obj-$(CONFIG_RT305X_MACH_F5D8235_V2) += mach-f5d8235-v2.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-615-h1.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-615-h1.c new file mode 100644 index 0000000000..dbfe4aa92f --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-615-h1.c @@ -0,0 +1,112 @@ +/* + * D-Link DIR-615 H1 + * + * Copyright (C) 2012 Mikko Hissa + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "devices.h" + +#define DIR_615_H1_GPIO_LED_WAN_AMBER 12 /* active low */ +#define DIR_615_H1_GPIO_LED_WAN_GREEN 13 /* active low */ +#define DIR_615_H1_GPIO_LED_WPS_BLUE 14 /* active low */ + +#define DIR_615_H1_GPIO_LED_STATUS_AMBER 7 +#define DIR_615_H1_GPIO_LED_STATUS_GREEN 9 + +#define DIR_615_H1_GPIO_BUTTON_RESET 10 /* active low */ +#define DIR_615_H1_GPIO_BUTTON_WPS 0 /* active low */ + +#define DIR_615_H1_KEYS_POLL_INTERVAL 20 +#define DIR_615_H1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615_H1_KEYS_POLL_INTERVAL) + +static struct gpio_led dir_615_h1_leds_gpio[] __initdata = { + { + .name = "d-link:amber:status", + .gpio = DIR_615_H1_GPIO_LED_STATUS_AMBER, + }, { + .name = "d-link:green:status", + .gpio = DIR_615_H1_GPIO_LED_STATUS_GREEN, + }, { + .name = "d-link:amber:wan", + .gpio = DIR_615_H1_GPIO_LED_WAN_AMBER, + .active_low = 1, + }, { + .name = "d-link:green:wan", + .gpio = DIR_615_H1_GPIO_LED_WAN_GREEN, + .active_low = 1, + }, { + .name = "d-link:blue:wps", + .gpio = DIR_615_H1_GPIO_LED_WPS_BLUE, + .active_low = 1, + } +}; + +static struct gpio_keys_button dir_615_h1_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DIR_615_H1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_615_H1_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DIR_615_H1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_615_H1_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +const struct flash_platform_data dir615h1_flash = { + .type = "mx25l3205d", +}; + +struct spi_board_info dir615h1_spi_slave_info[] __initdata = { + { + .modalias = "m25p80", + .platform_data = &dir615h1_flash, + .irq = -1, + .max_speed_hz = 10000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static void __init dir615h1_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + rt305x_register_spi(dir615h1_spi_slave_info, + ARRAY_SIZE(dir615h1_spi_slave_info)); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_615_h1_leds_gpio), + dir_615_h1_leds_gpio); + ramips_register_gpio_buttons(-1, DIR_615_H1_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dir_615_h1_gpio_buttons), + dir_615_h1_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_DIR_615_H1, "DIR-615-H1", "D-Link DIR-615 H1", + dir615h1_init); diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 1e17187c32..344186361d 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -183,6 +183,17 @@ define BuildFirmware/DIR300B1/initramfs $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir300b1)),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size)) endef +mtdlayout_dir615h1=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware) +define BuildFirmware/DIR615H1 + $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_dir615h1)),917504,2949120) + mkdir615h1 -e $(call sysupname,$(1),$(2)) \ + -o $(call imgname,$(1),$(2))-factory.bin +endef + +define BuildFirmware/DIR615H1/initramfs + $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_dir615h1))) +endef + mtdlayout_dap1350=192k(u-boot)ro,64k(devdata)ro,192k(devconf)ro,256k(devlang)ro,1088k(kernel),6400k(rootfs),7488k@0xb0000(firmware) mtd_dap1350_kernel_part_size=1114112 mtd_dap1350_rootfs_part_size=6553600 @@ -380,6 +391,10 @@ define Image/Build/Profile/DIR300B1 $(call Image/Build/Template/$(fs_squash)/$(1),DIR620A1,dir-620-a1,DIR-620-A1) endef +define Image/Build/Profile/DIR615H1 + $(call Image/Build/Template/$(fs_squash)/$(1),DIR615H1,dir-615-h1,DIR-615-H1,ttyS1,57600,spi) +endef + define Image/Build/Profile/DAP1350 $(call Image/Build/Template/$(fs_squash)/$(1),DAP1350,dap-1350,DAP-1350,RT3052-AP-DAP1350-3) endef @@ -503,6 +518,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/ARGUS_ATP52B,$(1)) $(call Image/Build/Profile/BC2,$(1)) $(call Image/Build/Profile/DIR300B1,$(1)) + $(call Image/Build/Profile/DIR615H1,$(1)) $(call Image/Build/Profile/DAP1350,$(1)) $(call Image/Build/Profile/ESR9753,$(1)) $(call Image/Build/Profile/F5D8235V2,$(1)) diff --git a/target/linux/ramips/rt305x/config-3.3 b/target/linux/ramips/rt305x/config-3.3 index 04afff646b..409bdbbbee 100644 --- a/target/linux/ramips/rt305x/config-3.3 +++ b/target/linux/ramips/rt305x/config-3.3 @@ -93,6 +93,7 @@ CONFIG_RT305X_MACH_ALL5002=y CONFIG_RT305X_MACH_ARGUS_ATP52B=y CONFIG_RT305X_MACH_BC2=y CONFIG_RT305X_MACH_DIR_300_REVB=y +CONFIG_RT305X_MACH_DIR_615_H1=y CONFIG_RT305X_MACH_DAP_1350=y CONFIG_RT305X_MACH_ESR_9753=y CONFIG_RT305X_MACH_F5D8235_V2=y