From: John Crispin Date: Sat, 17 Jan 2015 14:06:13 +0000 (+0000) Subject: ramips: add support for Intenso Memory 2 Move USB 3.0 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=88df2bd2ff5aa7b31ce9aaeda25c60e8a9b980b2;p=openwrt%2Fstaging%2Fldir.git ramips: add support for Intenso Memory 2 Move USB 3.0 This adds support for a rt5350-based "portable nas" solution from Intenso. The board comes with 32M RAM and 8M Flash, the built-in HDD is connected/accessible via a usb3.0<->sata bridge VLI VL701. The device has 1 Ethernet port (100M/10M), 1 micro b usb 3.0 socket (for charging the battery, or accessing the hdd directly). Wireless connectivity is provided by the rt5350 SoC [i.e.: 802.11n 1x1 2.4 GHz with a pcb antenna.] Serial, leds, wifi, ethernet and usb are tested and as far as I can tell: they are working fine (tm). Signed-off-by: Christian Lamparter SVN-Revision: 44001 --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index dfd0ca7049..8695cdeb65 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -152,6 +152,10 @@ case $board in nw718) set_usb_led "nw718:amber:usb" ;; + m2m) + set_wifi_led "m2m:blue:wifi" + ucidef_set_led_netdev "eth" "Ethernet" "m2m:green:wan" "eth0" + ;; omni-emb-hpm) ucidef_set_led_default "power" "POWER" "emb:orange:power" "1" ucidef_set_led_netdev "eth" "ETH" "emb:green:eth" "eth0" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index aad119738b..70b369de6a 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -65,6 +65,11 @@ ramips_setup_interfaces() ucidef_set_interface_lan "eth0.1" ;; + m2m) + ucidef_add_switch "switch0" "4" + ucidef_set_interface_lan "eth0" + ;; + wizard8800 | \ wl-330n | \ wmr300) diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 65ef0db96a..1693e9d4fe 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -79,6 +79,9 @@ get_status_led() { hw550-3g) status_led="hw550-3g:green:status" ;; + m2m) + status_led="m2m:blue:wifi" + ;; m3) status_led="m3:blue:status" ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 379713bf21..5918640985 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -214,6 +214,9 @@ ramips_board_detect() { *"NW718") name="nw718" ;; + *"Intenso Memory 2 Move") + name="m2m" + ;; *"Omnima EMB HPM") name="omni-emb-hpm" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index b5eecfc299..2c423443c7 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -55,6 +55,7 @@ platform_check_image() { ht-tm02 | \ hw550-3g | \ ip2202 | \ + m2m | \ m3 | \ m4 | \ mlw221 | \ diff --git a/target/linux/ramips/dts/M2M.dts b/target/linux/ramips/dts/M2M.dts new file mode 100644 index 0000000000..aa98991ae1 --- /dev/null +++ b/target/linux/ramips/dts/M2M.dts @@ -0,0 +1,113 @@ +/dts-v1/; + +/include/ "rt5350.dtsi" + +/ { + compatible = "M2M", "ralink,rt5350-soc"; + model = "Intenso Memory 2 Move"; + + chosen { + bootargs = "console=ttyS1,57600n8 root=/dev/mtdblock5"; + }; + + palmbus@10000000 { + uart@500 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l6405d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l6405d"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "Bootloader"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "Config"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "Factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + wifi { + label = "m2m:blue:wifi"; + gpios = <&gpio0 7 1>; + }; + wan { + label = "m2m:green:wan"; + gpios = <&gpio0 12 1>; + }; + }; + + gpio-keys-polled { + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + power { + label = "power"; + gpios = <&gpio0 1 1>; + linux,code = <0x116>; + }; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + }; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x28>; + }; + + esw@10110000 { + ralink,portmap = <0x2f>; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0x0>; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 21c8a8ddc9..5e4cea35ac 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -546,6 +546,8 @@ Image/Build/Profile/NCS601W=$(call BuildFirmware/Default8M/$(1),$(1),ncs601W,NCS nw718_mtd_size=3801088 Image/Build/Profile/NW718=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory) +Image/Build/Profile/M2M=$(call BuildFirmware/Default8M/$(1),$(1),m2m,M2M,Linux Kernel Image) + Image/Build/Profile/OMNI-EMB=$(call BuildFirmware/Default8M/$(1),$(1),omni-emb,OMNI-EMB) Image/Build/Profile/OMNI-PLUG=$(call BuildFirmware/Default8M/$(1),$(1),omni-plug,OMNI-PLUG) @@ -694,6 +696,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/HT-TM02,$(1)) $(call Image/Build/Profile/HW550-3G,$(1)) $(call Image/Build/Profile/IP2202,$(1)) + $(call Image/Build/Profile/M2M,$(1)) $(call Image/Build/Profile/M3,$(1)) $(call Image/Build/Profile/M4,$(1)) $(call Image/Build/Profile/MOFI3500-3GN,$(1)) diff --git a/target/linux/ramips/rt305x/profiles/m2m.mk b/target/linux/ramips/rt305x/profiles/m2m.mk new file mode 100644 index 0000000000..ea803baa25 --- /dev/null +++ b/target/linux/ramips/rt305x/profiles/m2m.mk @@ -0,0 +1,20 @@ +# +# Copyright (C) 2015 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/M2M + NAME:=Intenso Memory 2 Move + PACKAGES:=\ + kmod-ledtrig-netdev kmod-ledtrig-timer kmod-leds-gpio \ + kmod-usb-core kmod-usb2 kmod-usb-storage kmod-scsi-core \ + kmod-fs-ext4 kmod-fs-vfat block-mount +endef + +define Profile/M2M/Description + Package set for Intenso Memory 2 Move USB 3.0 +endef + +$(eval $(call Profile,M2M))