From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 27 Nov 2011 11:30:29 +0000 (+0800) Subject: pata/at91: use newly introduced SMC accessors X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=88dcde98ad113411f45ea7e8261839f7a1ba3c33;p=openwrt%2Fstaging%2Fblogic.git pata/at91: use newly introduced SMC accessors pata_at91 driver is broken since faee0cc: "make smc register base soc independent" Fix it with newly introduced SMC accessors. The overall action of removal of at91_sys_read/write will allow to use the pata_at91 on a single zImage kernel. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre Cc: linux-ide@vger.kernel.org --- diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c index a7d91a72ee35..53d3770a0b1b 100644 --- a/drivers/ata/pata_at91.c +++ b/drivers/ata/pata_at91.c @@ -207,11 +207,11 @@ static void set_smc_timing(struct device *dev, struct ata_device *adev, { int ret = 0; int use_iordy; + struct sam9_smc_config smc; unsigned int t6z; /* data tristate time in ns */ unsigned int cycle; /* SMC Cycle width in MCK ticks */ unsigned int setup; /* SMC Setup width in MCK ticks */ unsigned int pulse; /* CFIOR and CFIOW pulse width in MCK ticks */ - unsigned int cs_setup = 0;/* CS4 or CS5 setup width in MCK ticks */ unsigned int cs_pulse; /* CS4 or CS5 pulse width in MCK ticks*/ unsigned int tdf_cycles; /* SMC TDF MCK ticks */ unsigned long mck_hz; /* MCK frequency in Hz */ @@ -244,26 +244,20 @@ static void set_smc_timing(struct device *dev, struct ata_device *adev, } dev_dbg(dev, "Use IORDY=%u, TDF Cycles=%u\n", use_iordy, tdf_cycles); - info->mode |= AT91_SMC_TDF_(tdf_cycles); - - /* write SMC Setup Register */ - at91_sys_write(AT91_SMC_SETUP(info->cs), - AT91_SMC_NWESETUP_(setup) | - AT91_SMC_NRDSETUP_(setup) | - AT91_SMC_NCS_WRSETUP_(cs_setup) | - AT91_SMC_NCS_RDSETUP_(cs_setup)); - /* write SMC Pulse Register */ - at91_sys_write(AT91_SMC_PULSE(info->cs), - AT91_SMC_NWEPULSE_(pulse) | - AT91_SMC_NRDPULSE_(pulse) | - AT91_SMC_NCS_WRPULSE_(cs_pulse) | - AT91_SMC_NCS_RDPULSE_(cs_pulse)); - /* write SMC Cycle Register */ - at91_sys_write(AT91_SMC_CYCLE(info->cs), - AT91_SMC_NWECYCLE_(cycle) | - AT91_SMC_NRDCYCLE_(cycle)); - /* write SMC Mode Register*/ - at91_sys_write(AT91_SMC_MODE(info->cs), info->mode); + + /* SMC Setup Register */ + smc.nwe_setup = smc.nrd_setup = setup; + smc.ncs_write_setup = smc.ncs_read_setup = 0; + /* SMC Pulse Register */ + smc.nwe_pulse = smc.nrd_pulse = pulse; + smc.ncs_write_pulse = smc.ncs_read_pulse = cs_pulse; + /* SMC Cycle Register */ + smc.write_cycle = smc.read_cycle = cycle; + /* SMC Mode Register*/ + smc.tdf_cycles = tdf_cycles; + smc.mode = info->mode; + + sam9_smc_configure(0, info->cs, &smc); } static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev) @@ -288,20 +282,20 @@ static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev, struct at91_ide_info *info = dev->link->ap->host->private_data; unsigned int consumed; unsigned long flags; - unsigned int mode; + struct sam9_smc_config smc; local_irq_save(flags); - mode = at91_sys_read(AT91_SMC_MODE(info->cs)); + sam9_smc_read_mode(0, info->cs, &smc); /* set 16bit mode before writing data */ - at91_sys_write(AT91_SMC_MODE(info->cs), - (mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16); + smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16; + sam9_smc_write_mode(0, info->cs, &smc); consumed = ata_sff_data_xfer(dev, buf, buflen, rw); /* restore 8bit mode after data is written */ - at91_sys_write(AT91_SMC_MODE(info->cs), - (mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8); + smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8; + sam9_smc_write_mode(0, info->cs, &smc); local_irq_restore(flags); return consumed;