From: Adrian Huang Date: Mon, 6 Jul 2015 04:19:12 +0000 (+0800) Subject: rtc: cmos: Cancel alarm timer if alarm time is equal to now+1 seconds X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=88b8d33b1c6aadba553c998db91c4b36be0fac52;p=openwrt%2Fstaging%2Fblogic.git rtc: cmos: Cancel alarm timer if alarm time is equal to now+1 seconds Steps to reproduce the problem: 1) Enable RTC wake-up option in BIOS Setup 2) Issue one of these commands in the OS: "poweroff" or "shutdown -h now" 3) System will shut down and then reboot automatically Root-cause of the issue: 1) During the shutdown process, the hwclock utility is used to save the system clock to hardware clock (RTC). 2) The hwclock utility invokes ioctl() with RTC_UIE_ON. The kernel configures the RTC alarm for the periodic interrupt (every 1 second). 3) The hwclock uitlity closes the /dev/rtc0 device, and the kernel disables the RTC alarm irq (AIE bit of Register B) via ioctl() with RTC_UIE_OFF. But, the configured alarm time is the current_time + 1. 4) After the next 1 second is elapsed, the AF (alarm interrupt flag) of Register C is set. 5) The S5 handler in BIOS is invoked to configure alarm registers (enable AIE bit and configure alarm date/time). But, BIOS does not clear the previous interrupt status during alarm configuration. Therefore, "AF=AIE=1" causes the rtc device to trigger an interrupt. 6) So, the machine reboots automatically right after shutdown. This patch cancels the alarm timer if the following condictions are met (suggested by Alexandre): 1) The configured alarm time is equal to current_time + 1 seconds. 2) The AIE timer is not in use. The member 'alarm_expires' is introduced in struct cmos_rtc because of the following reasons: 1) The configured alarm time can be retrieved from cmos_read_alarm(), but we need to take the 'wrapped timestamp' and 'time rollover' into consideration. The function __rtc_read_alarm() eliminates the concerns. To avoid the duplicated code in the lower level RTC driver, invoking __rtc_read_alarm from the lower level RTC driver is not encouraged. Moreover, the compilation error 'the undefined __rtc_read_alarm" is observed if the lower level RTC driver is compiled as a kernel module. 2) The uie_rtctimer.node.expires and aie_timer.node.expires can be retrieved for the configured alarm time. But, the problem is that either of them might configure the CMOS alarm time. We cannot make sure UIE timer or AIE tiemr configured the CMOS alarm time before. (uie_rtctimer or aie_timer is enabled and then is disabled). 3) The patch introduces the member 'alarm_expires' to keep the newly configured alarm time, so the above-mentioned concerns can be eliminated. The issue goes away after 20-time shutdown tests. Signed-off-by: Adrian Huang Tested-by: Egbert Eich Tested-by: Diego Ercolani Cc: Borislav Petkov Signed-off-by: Alexandre Belloni --- diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index a82556a0757a..5ac9a5da8522 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -51,6 +51,7 @@ struct cmos_rtc { struct device *dev; int irq; struct resource *iomem; + time64_t alarm_expires; void (*wake_on)(struct device *); void (*wake_off)(struct device *); @@ -377,6 +378,8 @@ static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t) spin_unlock_irq(&rtc_lock); + cmos->alarm_expires = rtc_tm_to_time64(&t->time); + return 0; } @@ -860,6 +863,51 @@ static void __exit cmos_do_remove(struct device *dev) cmos->dev = NULL; } +static int cmos_aie_poweroff(struct device *dev) +{ + struct cmos_rtc *cmos = dev_get_drvdata(dev); + struct rtc_time now; + time64_t t_now; + int retval = 0; + unsigned char rtc_control; + + if (!cmos->alarm_expires) + return -EINVAL; + + spin_lock_irq(&rtc_lock); + rtc_control = CMOS_READ(RTC_CONTROL); + spin_unlock_irq(&rtc_lock); + + /* We only care about the situation where AIE is disabled. */ + if (rtc_control & RTC_AIE) + return -EBUSY; + + cmos_read_time(dev, &now); + t_now = rtc_tm_to_time64(&now); + + /* + * When enabling "RTC wake-up" in BIOS setup, the machine reboots + * automatically right after shutdown on some buggy boxes. + * This automatic rebooting issue won't happen when the alarm + * time is larger than now+1 seconds. + * + * If the alarm time is equal to now+1 seconds, the issue can be + * prevented by cancelling the alarm. + */ + if (cmos->alarm_expires == t_now + 1) { + struct rtc_wkalrm alarm; + + /* Cancel the AIE timer by configuring the past time. */ + rtc_time64_to_tm(t_now - 1, &alarm.time); + alarm.enabled = 0; + retval = cmos_set_alarm(dev, &alarm); + } else if (cmos->alarm_expires > t_now + 1) { + retval = -EBUSY; + } + + return retval; +} + #ifdef CONFIG_PM static int cmos_suspend(struct device *dev) @@ -1094,8 +1142,12 @@ static void cmos_pnp_shutdown(struct pnp_dev *pnp) struct device *dev = &pnp->dev; struct cmos_rtc *cmos = dev_get_drvdata(dev); - if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(dev)) - return; + if (system_state == SYSTEM_POWER_OFF) { + int retval = cmos_poweroff(dev); + + if (cmos_aie_poweroff(dev) < 0 && !retval) + return; + } cmos_do_shutdown(cmos->irq); } @@ -1200,8 +1252,12 @@ static void cmos_platform_shutdown(struct platform_device *pdev) struct device *dev = &pdev->dev; struct cmos_rtc *cmos = dev_get_drvdata(dev); - if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(dev)) - return; + if (system_state == SYSTEM_POWER_OFF) { + int retval = cmos_poweroff(dev); + + if (cmos_aie_poweroff(dev) < 0 && !retval) + return; + } cmos_do_shutdown(cmos->irq); }