From: Michael Pratt Date: Sat, 1 May 2021 18:47:01 +0000 (-0400) Subject: ramips: mt7620: ethernet: use more macros and bump version X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=88a0cebadfecb6ebb9f5f535e74f7f7574f513f3;p=openwrt%2Fstaging%2Fmans0n.git ramips: mt7620: ethernet: use more macros and bump version Define and use some missing macros, and use them instead of BIT() or numbers for more readable code. Add comment for a bit change that seems unrelated to ethernet but is actually needed (PCIe Root Complex mode). Remove unknown and unused macro RST_CTRL_MCM (probably from MT7621 / MT7622) This is the last of a series of fixes, so bump version. Signed-off-by: Michael Pratt --- diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.c index ae90f0484d..7c91e5840b 100644 --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.c +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.c @@ -65,9 +65,11 @@ static void mt7620_hw_init(struct mt7620_gsw *gsw) { u32 i; u32 val; - u32 is_BGA = (rt_sysc_r32(0x0c) >> 16) & 1; + u32 is_BGA = (rt_sysc_r32(SYSC_REG_CHIP_REV_ID) >> 16) & 1; + + /* Internal ethernet requires PCIe RC mode */ + rt_sysc_w32(rt_sysc_r32(SYSC_REG_CFG1) | PCIE_RC_MODE, SYSC_REG_CFG1); - rt_sysc_w32(rt_sysc_r32(SYSC_REG_CFG1) | BIT(8), SYSC_REG_CFG1); mtk_switch_w32(gsw, mtk_switch_r32(gsw, GSW_REG_CKGCR) & ~(0x3 << 4), GSW_REG_CKGCR); /* Enable MIB stats */ @@ -83,7 +85,7 @@ static void mt7620_hw_init(struct mt7620_gsw *gsw) mtk_switch_w32(gsw, mtk_switch_r32(gsw, GSW_REG_GPC1) | (gsw->ephy_base << 16), GSW_REG_GPC1); - fe_reset(BIT(24)); /* Resets the Ethernet PHY block. */ + fe_reset(MT7620A_RESET_EPHY); pr_info("gsw: ephy base address: %d\n", gsw->ephy_base); } diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.h b/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.h index fde7792c02..cb5d098e9c 100644 --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.h +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.h @@ -55,7 +55,7 @@ #define SYSC_REG_CHIP_REV_ID 0x0c #define SYSC_REG_CFG1 0x14 -#define RST_CTRL_MCM BIT(2) +#define PCIE_RC_MODE BIT(8) #define SYSC_PAD_RGMII2_MDIO 0x58 #define SYSC_GPIO_MODE 0x60 diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/mtk_eth_soc.h b/target/linux/ramips/files/drivers/net/ethernet/ralink/mtk_eth_soc.h index 00f1a0e7e6..c8517f9f9d 100644 --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/mtk_eth_soc.h +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/mtk_eth_soc.h @@ -49,7 +49,7 @@ enum fe_work_flag { FE_FLAG_MAX }; -#define MTK_FE_DRV_VERSION "0.1.2" +#define MTK_FE_DRV_VERSION "0.2" /* power of 2 to let NEXT_TX_DESP_IDX work */ #define NUM_DMA_DESC BIT(10) @@ -157,6 +157,10 @@ enum fe_work_flag { #define MT7620A_FE_GDMA1_MAC_ADRL (MT7620A_GDMA_OFFSET + 0x0C) #define MT7620A_FE_GDMA1_MAC_ADRH (MT7620A_GDMA_OFFSET + 0x10) +#define MT7620A_RESET_FE BIT(21) +#define MT7620A_RESET_ESW BIT(23) +#define MT7620A_RESET_EPHY BIT(24) + #define RT5350_TX_BASE_PTR0 (RT5350_PDMA_OFFSET + 0x00) #define RT5350_TX_MAX_CNT0 (RT5350_PDMA_OFFSET + 0x04) #define RT5350_TX_CTX_IDX0 (RT5350_PDMA_OFFSET + 0x08) diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_mt7620.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_mt7620.c index c9104aa375..1ca597470c 100644 --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_mt7620.c +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_mt7620.c @@ -27,8 +27,6 @@ #define MT7620A_CDMA_CSG_CFG 0x400 #define MT7620_DMA_VID (MT7620A_CDMA_CSG_CFG | 0x30) -#define MT7620A_RESET_FE BIT(21) -#define MT7620A_RESET_ESW BIT(23) #define MT7620_L4_VALID BIT(23) #define MT7620_TX_DMA_UDF BIT(15)