From: Pascal Ernster Date: Sun, 4 Jun 2023 20:16:20 +0000 (+0200) Subject: realtek: Use MDIO_* constants from X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=87a2f03b86588d7a71af789225ebce284c6cb25d;p=openwrt%2Fstaging%2Flinusw.git realtek: Use MDIO_* constants from To improve code readability in drivers/net/phy/rtl83xx-phy.c, replace constants MMD_AN and MMD_VEND2 from drivers/net/phy/rtl83xx-phy.h with MDIO_MMD_AN and MDIO_MMD_VEND2 from . Also, replace BIT(0) with MDIO_EEE_2_5GT, BIT(1) with MDIO_EEE_100TX, BIT(2) with MDIO_EEE_1000T, BIT(9) with MDIO_AN_CTRL1_RESTART, BIT(12) with MDIO_AN_CTRL1_ENABLE, 32 with MDIO_AN_10GBT_CTRL, 60 with MDIO_AN_EEE_ADV, and 62 with MDIO_AN_EEE_ADV2 from . Suggested-by: DENG Qingfang Signed-off-by: Pascal Ernster --- diff --git a/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c b/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c index 33c929e41a..c69a5af4bd 100644 --- a/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c +++ b/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include "rtl83xx-phy.h" @@ -443,20 +444,20 @@ static int rtl8226_read_status(struct phy_device *phydev) /* Link status must be read twice */ for (int i = 0; i < 2; i++) - val = phy_read_mmd(phydev, MMD_VEND2, 0xA402); + val = phy_read_mmd(phydev, MDIO_MMD_VEND2, 0xA402); phydev->link = val & BIT(2) ? 1 : 0; if (!phydev->link) goto out; /* Read duplex status */ - val = phy_read_mmd(phydev, MMD_VEND2, 0xA434); + val = phy_read_mmd(phydev, MDIO_MMD_VEND2, 0xA434); if (val < 0) goto out; phydev->duplex = !!(val & BIT(3)); /* Read speed */ - val = phy_read_mmd(phydev, MMD_VEND2, 0xA434); + val = phy_read_mmd(phydev, MDIO_MMD_VEND2, 0xA434); switch (val & 0x0630) { case 0x0000: phydev->speed = SPEED_10; @@ -491,7 +492,7 @@ static int rtl8226_advertise_aneg(struct phy_device *phydev) pr_info("In %s\n", __func__); - v = phy_read_mmd(phydev, MMD_AN, 16); + v = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE); if (v < 0) goto out; @@ -500,25 +501,25 @@ static int rtl8226_advertise_aneg(struct phy_device *phydev) v |= ADVERTISE_100HALF; v |= ADVERTISE_100FULL; - ret = phy_write_mmd(phydev, MMD_AN, 16, v); + ret = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE, v); /* Allow 1GBit */ - v = phy_read_mmd(phydev, MMD_VEND2, 0xA412); + v = phy_read_mmd(phydev, MDIO_MMD_VEND2, 0xA412); if (v < 0) goto out; v |= ADVERTISE_1000FULL; - ret = phy_write_mmd(phydev, MMD_VEND2, 0xA412, v); + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, 0xA412, v); if (ret < 0) goto out; /* Allow 2.5G */ - v = phy_read_mmd(phydev, MMD_AN, 32); + v = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL); if (v < 0) goto out; - v |= BIT(7); - ret = phy_write_mmd(phydev, MMD_AN, 32, v); + v |= MDIO_AN_10GBT_CTRL_ADV2_5G; + ret = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, v); out: return ret; @@ -535,22 +536,22 @@ static int rtl8226_config_aneg(struct phy_device *phydev) if (ret) goto out; /* AutoNegotiationEnable */ - v = phy_read_mmd(phydev, MMD_AN, 0); + v = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1); if (v < 0) goto out; - v |= BIT(12); /* Enable AN */ - ret = phy_write_mmd(phydev, MMD_AN, 0, v); + v |= MDIO_AN_CTRL1_ENABLE; /* Enable AN */ + ret = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, v); if (ret < 0) goto out; /* RestartAutoNegotiation */ - v = phy_read_mmd(phydev, MMD_VEND2, 0xA400); + v = phy_read_mmd(phydev, MDIO_MMD_VEND2, 0xA400); if (v < 0) goto out; - v |= BIT(9); + v |= MDIO_AN_CTRL1_RESTART; - ret = phy_write_mmd(phydev, MMD_VEND2, 0xA400, v); + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, 0xA400, v); } /* TODO: ret = __genphy_config_aneg(phydev, ret); */ @@ -567,12 +568,12 @@ static int rtl8226_get_eee(struct phy_device *phydev, pr_debug("In %s, port %d, was enabled: %d\n", __func__, addr, e->eee_enabled); - val = phy_read_mmd(phydev, MMD_AN, 60); + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV); if (e->eee_enabled) { - e->eee_enabled = !!(val & BIT(1)); + e->eee_enabled = !!(val & MDIO_EEE_100TX); if (!e->eee_enabled) { - val = phy_read_mmd(phydev, MMD_AN, 62); - e->eee_enabled = !!(val & BIT(0)); + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV2); + e->eee_enabled = !!(val & MDIO_EEE_2_5GT); } } pr_debug("%s: enabled: %d\n", __func__, e->eee_enabled); @@ -592,29 +593,29 @@ static int rtl8226_set_eee(struct phy_device *phydev, struct ethtool_eee *e) poll_state = disable_polling(port); /* Remember aneg state */ - val = phy_read_mmd(phydev, MMD_AN, 0); - an_enabled = !!(val & BIT(12)); + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1); + an_enabled = !!(val & MDIO_AN_CTRL1_ENABLE); /* Setup 100/1000MBit */ - val = phy_read_mmd(phydev, MMD_AN, 60); + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV); if (e->eee_enabled) - val |= 0x6; + val |= (MDIO_EEE_100TX | MDIO_EEE_1000T); else - val &= 0x6; - phy_write_mmd(phydev, MMD_AN, 60, val); + val &= (MDIO_EEE_100TX | MDIO_EEE_1000T); + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, val); /* Setup 2.5GBit */ - val = phy_read_mmd(phydev, MMD_AN, 62); + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV2); if (e->eee_enabled) - val |= 0x1; + val |= MDIO_EEE_2_5GT; else - val &= 0x1; - phy_write_mmd(phydev, MMD_AN, 62, val); + val &= MDIO_EEE_2_5GT; + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV2, val); /* RestartAutoNegotiation */ - val = phy_read_mmd(phydev, MMD_VEND2, 0xA400); - val |= BIT(9); - phy_write_mmd(phydev, MMD_VEND2, 0xA400, val); + val = phy_read_mmd(phydev, MDIO_MMD_VEND2, 0xA400); + val |= MDIO_AN_CTRL1_RESTART; + phy_write_mmd(phydev, MDIO_MMD_VEND2, 0xA400, val); resume_polling(poll_state); @@ -1058,10 +1059,9 @@ void rtl8218d_eee_set(struct phy_device *phydev, bool enable) val = phy_read(phydev, MII_BMCR); an_enabled = val & BMCR_ANENABLE; - /* Enable 100M (bit 1) / 1000M (bit 2) EEE */ - val = phy_read_mmd(phydev, 7, 60); - val |= BIT(2) | BIT(1); - phy_write_mmd(phydev, 7, 60, enable ? 0x6 : 0); + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV); + val |= MDIO_EEE_1000T | MDIO_EEE_100TX; + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, enable ? (MDIO_EEE_100TX | MDIO_EEE_1000T) : 0); /* 500M EEE ability */ val = phy_read_paged(phydev, RTL821X_PAGE_GPHY, 20); @@ -1093,7 +1093,7 @@ static int rtl8218b_get_eee(struct phy_device *phydev, /* Set GPHY page to copper */ phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); - val = phy_read_paged(phydev, 7, 60); + val = phy_read_paged(phydev, 7, MDIO_AN_EEE_ADV); if (e->eee_enabled) { /* Verify vs MAC-based EEE */ e->eee_enabled = !!(val & BIT(7)); @@ -1121,7 +1121,7 @@ static int rtl8218d_get_eee(struct phy_device *phydev, /* Set GPHY page to copper */ phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); - val = phy_read_paged(phydev, 7, 60); + val = phy_read_paged(phydev, 7, MDIO_AN_EEE_ADV); if (e->eee_enabled) e->eee_enabled = !!(val & BIT(7)); pr_debug("%s: enabled: %d\n", __func__, e->eee_enabled); @@ -1162,7 +1162,7 @@ static int rtl8214fc_set_eee(struct phy_device *phydev, phy_write_paged(phydev, RTL821X_PAGE_MAC, 25, val); /* Enable 100M (bit 1) / 1000M (bit 2) EEE */ - phy_write_paged(phydev, 7, 60, e->eee_enabled ? 0x6 : 0); + phy_write_paged(phydev, 7, MDIO_AN_EEE_ADV, e->eee_enabled ? (MDIO_EEE_100TX | MDIO_EEE_1000T) : 0); /* 500M EEE ability */ val = phy_read_paged(phydev, RTL821X_PAGE_GPHY, 20); diff --git a/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.h b/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.h index 3b91231829..fb79560e6b 100644 --- a/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.h +++ b/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.h @@ -35,10 +35,6 @@ struct __attribute__ ((__packed__)) fw_header { #define PHY_ID_RTL8393_I 0x001c8393 #define PHY_ID_RTL9300_I 0x70d03106 -/* PHY MMD devices */ -#define MMD_AN 7 -#define MMD_VEND2 31 - /* Registers of the internal Serdes of the 8380 */ #define RTL838X_SDS_MODE_SEL (0x0028) #define RTL838X_SDS_CFG_REG (0x0034)