From: INAGAKI Hiroshi Date: Tue, 6 Nov 2018 13:37:43 +0000 (+0900) Subject: ath79: modify mtd partitions for Buffalo BHR-4GRV2 X-Git-Tag: v19.07.0-rc1~2093 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=879f2ef7c0720c49f0911a6a3a7f8fe4111c2acb;p=openwrt%2Fstaging%2Fpepe2k.git ath79: modify mtd partitions for Buffalo BHR-4GRV2 This commit modifies mtd partitions define for Buffalo BHR-4GRV2 and move it to generic subtarget. In Buffalo BHR-4GRV2, "kernel" partition is located behined "rootfs" partition in the stock firmware. This causes the size of the kernel to be limited by the fixed value. 0x50000 0xe80000 0xff0000 +-------------------------------+--------------+ | rootfs | kernel | | (14528k) | (1472k) | +-------------------------------+--------------+ After ar71xx was updated to Kernel 4.14, the kernel size of BHR-4GRV2 exceeded the limit, and it breaks builds on official buildbot. Since this issue was also confirmed in ath79, I modified the mtd partitions to get rid of that limitation. 0x50000 0xff0000 +----------------------------------------------+ | firmware | | (16000k) | +----------------------------------------------+ However, this commit breaks compatibility with ar71xx firmware, so I dropped "SUPPORTED_DEVICES += bhr-4grv2". This commit requires new flash instruction instead of the old one. Flash instruction using initramfs image: 1. Connect the computer to the LAN port of BHR-4GRV2 2. Set the IP address of the computer to 192.168.12.10 3. Rename the OpenWrt initramfs image to "bhr4grv2-uImage-initramfs-gzip.bin" and place it into the TFTP directory 4. Start the tftp server on the computer 5. While holding down the "ECO" button, connect power cable to BHR-4GRV2 and turn on it 6. Flashing (orange) diag LED and release the finger from the button, BHR-4GRV2 downloads the intiramfs image from TFTP server and boot with it 7. On the initramfs image, create "/etc/fw_env.config" file with following contents /dev/mtd1 0x0 0x10000 0x10000 8. Execute following commands to add environment variables for u-boot fw_setenv ipaddr 192.168.12.1 fw_setenv serverip 192.168.12.10 fw_setenv ethaddr 00:aa:bb:cc:dd:ee fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" 9. Perform sysupgrade with squashfs-sysupgrade image 10. Wait ~150 seconds to complete flashing And this commit includes small fix; BHR-4GRV2 has QCA9557 as a SoC, not QCA9558. Signed-off-by: INAGAKI Hiroshi --- diff --git a/include/image-commands.mk b/include/image-commands.mk index 05d36093d3..ac724d20ac 100644 --- a/include/image-commands.mk +++ b/include/image-commands.mk @@ -62,14 +62,6 @@ define Build/zyxel-ras-image && mv $@.new $@ endef -define Build/mkbuffaloimg - $(STAGING_DIR_HOST)/bin/mkbuffaloimg -B $(BOARDNAME) \ - -R $$(($(subst k, * 1024,$(ROOTFS_SIZE)))) \ - -K $$(($(subst k, * 1024,$(KERNEL_SIZE)))) \ - -i $@ -o $@.new - mv $@.new $@ -endef - define Build/netgear-chk $(STAGING_DIR_HOST)/bin/mkchkimg \ -o $@.new \ diff --git a/target/linux/ar71xx/image/tiny.mk b/target/linux/ar71xx/image/tiny.mk index aabe68c2b9..b318d81537 100644 --- a/target/linux/ar71xx/image/tiny.mk +++ b/target/linux/ar71xx/image/tiny.mk @@ -1,3 +1,12 @@ +define Build/mkbuffaloimg + $(STAGING_DIR_HOST)/bin/mkbuffaloimg -B $(BOARDNAME) \ + -R $$(($(subst k, * 1024,$(ROOTFS_SIZE)))) \ + -K $$(($(subst k, * 1024,$(KERNEL_SIZE)))) \ + -i $@ -o $@.new + mv $@.new $@ +endef + + define Device/bhr-4grv2 DEVICE_TITLE := Buffalo BHR-4GRV2 BOARDNAME := BHR-4GRV2 diff --git a/target/linux/ath79/base-files/lib/upgrade/platform.sh b/target/linux/ath79/base-files/lib/upgrade/platform.sh index 806b3f0787..a7cb455b8e 100644 --- a/target/linux/ath79/base-files/lib/upgrade/platform.sh +++ b/target/linux/ath79/base-files/lib/upgrade/platform.sh @@ -22,10 +22,6 @@ platform_do_upgrade() { local board=$(board_name) case "$board" in - buffalo,bhr-4grv2) - PART_NAME="rootfs:kernel" - default_do_upgrade "$ARGV" - ;; ubnt,routerstation|\ ubnt,routerstation-pro) routerstation_do_upgrade "$ARGV" diff --git a/target/linux/ath79/dts/qca9557_buffalo_bhr-4grv2.dts b/target/linux/ath79/dts/qca9557_buffalo_bhr-4grv2.dts new file mode 100644 index 0000000000..6a3a5da6d6 --- /dev/null +++ b/target/linux/ath79/dts/qca9557_buffalo_bhr-4grv2.dts @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca9557.dtsi" + +/ { + compatible = "buffalo,bhr-4grv2", "qca,qca9557"; + model = "Buffalo BHR-4GRV2"; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power: power { + label = "bhr-4grv2:green:power"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + diag { + label = "bhr-4grv2:orange:diag"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + vpn_orange { + label = "bhr-4grv2:orange:vpn"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + vpn_green { + label = "bhr-4grv2:green:vpn"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; + + eco { + label = "eco"; + gpios = <&gpio 21 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + debounce-interval = <60>; + }; + }; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x050000 0xfa0000>; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + + qca,ar8327-initvals = < + 0x04 0x80080080 /* PORT0 PAD MODE CTRL */ + 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */ + 0x7c 0x0000007e /* PORT0_STATUS */ + 0x94 0x0000007e /* PORT6 STATUS */ + >; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&art 0x0>; + phy-handle = <&phy0>; + pll-data = <0x56000000 0x00000101 0x00001616>; +}; + +ð1 { + status = "okay"; + + mtd-mac-address = <&art 0x6>; + pll-data = <0x03000101 0x00000101 0x00001616>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&uart { + status = "okay"; +}; diff --git a/target/linux/ath79/dts/qca9558_buffalo_bhr-4grv2.dts b/target/linux/ath79/dts/qca9558_buffalo_bhr-4grv2.dts deleted file mode 100644 index e2611e5bf0..0000000000 --- a/target/linux/ath79/dts/qca9558_buffalo_bhr-4grv2.dts +++ /dev/null @@ -1,155 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include -#include - -#include "qca9557.dtsi" - -/ { - compatible = "buffalo,bhr-4grv2", "qca,qca9557"; - model = "Buffalo BHR-4GRV2"; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - chosen { - bootargs = "console=ttyS0,115200n8"; - }; - - gpio-leds { - compatible = "gpio-leds"; - - power: power { - label = "bhr-4grv2:green:power"; - gpios = <&gpio 19 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - diag { - label = "bhr-4grv2:orange:diag"; - gpios = <&gpio 20 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - vpn_orange { - label = "bhr-4grv2:orange:vpn"; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - vpn_green { - label = "bhr-4grv2:green:vpn"; - gpios = <&gpio 18 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - }; - - eco { - label = "eco"; - gpios = <&gpio 21 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - debounce-interval = <60>; - }; - }; -}; - -&spi { - status = "okay"; - num-cs = <1>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@40000 { - label = "u-boot-env"; - reg = <0x040000 0x010000>; - read-only; - }; - - partition@50000 { - label = "rootfs"; - reg = <0x050000 0xe30000>; - }; - - partition@e80000 { - label = "kernel"; - reg = <0xe80000 0x170000>; - }; - - art: partition@ff0000 { - label = "art"; - reg = <0xff0000 0x010000>; - read-only; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - - qca,ar8327-initvals = < - 0x04 0x80080080 /* PORT0 PAD MODE CTRL */ - 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */ - 0x7c 0x0000007e /* PORT0_STATUS */ - 0x94 0x0000007e /* PORT6 STATUS */ - >; - }; -}; - -ð0 { - status = "okay"; - - mtd-mac-address = <&art 0x0>; - phy-handle = <&phy0>; - pll-data = <0x56000000 0x00000101 0x00001616>; -}; - -ð1 { - status = "okay"; - - mtd-mac-address = <&art 0x6>; - pll-data = <0x03000101 0x00000101 0x00001616>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&uart { - status = "okay"; -}; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 3dbed22924..9bdd8f6e35 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -82,6 +82,13 @@ define Device/buffalo_bhr-4grv endef TARGET_DEVICES += buffalo_bhr-4grv +define Device/buffalo_bhr-4grv2 + ATH_SOC := qca9557 + DEVICE_TITLE := Buffalo BHR-4GRV2 + IMAGE_SIZE := 16000k +endef +TARGET_DEVICES += buffalo_bhr-4grv2 + define Device/buffalo_wzr-hp-ag300h ATH_SOC := ar7161 DEVICE_TITLE := Buffalo WZR-HP-AG300H diff --git a/target/linux/ath79/image/tiny.mk b/target/linux/ath79/image/tiny.mk index 4dda24edac..bf7a5e140b 100644 --- a/target/linux/ath79/image/tiny.mk +++ b/target/linux/ath79/image/tiny.mk @@ -1,24 +1,5 @@ include ./common-buffalo.mk -DEVICE_VARS += ROOTFS_SIZE - -define Device/buffalo_bhr-4grv2 - ATH_SOC := qca9558 - DEVICE_TITLE := Buffalo BHR-4GRV2 - BOARDNAME := BHR-4GRV2 - ROOTFS_SIZE := 14528k - KERNEL_SIZE := 1472k - IMAGE_SIZE := 16000k - IMAGES += factory.bin - IMAGE/sysupgrade.bin := \ - append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | \ - append-kernel | append-metadata | check-size $$$$(IMAGE_SIZE) - IMAGE/factory.bin := append-kernel | \ - pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | mkbuffaloimg - SUPPORTED_DEVICES += bhr-4grv2 -endef -TARGET_DEVICES += buffalo_bhr-4grv2 - define Device/buffalo_whr-g301n ATH_SOC := ar7240 DEVICE_TITLE := Buffalo WHR-G301N