From: Chukun Pan <amadeus@jmu.edu.cn>
Date: Wed, 4 Dec 2024 15:26:28 +0000 (+0800)
Subject: mediatek: update status led for Cudy TR3000
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=87632219d4b8f0c96ea053e375f6f324fab0806f;p=openwrt%2Fstaging%2Fstintel.git

mediatek: update status led for Cudy TR3000

Use white led when running, consistent with the stock firmware.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
---

diff --git a/target/linux/mediatek/dts/mt7981b-cudy-tr3000-v1.dts b/target/linux/mediatek/dts/mt7981b-cudy-tr3000-v1.dts
index 2591de8520..ff3c83a12d 100644
--- a/target/linux/mediatek/dts/mt7981b-cudy-tr3000-v1.dts
+++ b/target/linux/mediatek/dts/mt7981b-cudy-tr3000-v1.dts
@@ -12,10 +12,10 @@
 
 	aliases {
 		label-mac-device = &gmac1;
-		led-boot = &led_status;
-		led-failsafe = &led_status;
-		led-running = &led_status;
-		led-upgrade = &led_status;
+		led-boot = &led_sys_red;
+		led-failsafe = &led_sys_red;
+		led-running = &led_sys_white;
+		led-upgrade = &led_sys_white;
 		serial0 = &uart0;
 	};
 
@@ -34,8 +34,8 @@
 
 		mode {
 			label = "mode";
-			linux,input-type = <EV_SW>;
 			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
 			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
 			debounce-interval = <60>;
 		};
@@ -44,18 +44,17 @@
 	leds {
 		compatible = "gpio-leds";
 
-		led_status: led_0 {
+		led_sys_red: led-0 {
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_RED>;
 			gpios = <&pio 11 GPIO_ACTIVE_LOW>;
 		};
 
-		led_1 {
+		led_sys_white: led-1 {
 			function = LED_FUNCTION_STATUS;
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
 		};
-
 	};
 
 	usb_vbus: regulator-usb {