From: Julien Dusser <julien.dusser@free.fr>
Date: Wed, 1 Jul 2020 21:56:01 +0000 (+0200)
Subject: ath79: add QCA956x SERDES init workaround
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=87627b2d760cd2ac341dd3181ce6f987d69777c2;p=openwrt%2Fstaging%2Fthess.git

ath79: add QCA956x SERDES init workaround

This commit add a workaround for non working SGMII link observed on some
QCA956x SoCs. The workaround originates part from the U-Boot source code
from QCA, part from the implementation from TP-Link found in the GPL
tarball for the EAP245v1.

Extends commit 0d416a8d3b990e3b78628f0e7546527709c877f7 for QCA956x.
Note that reset is the same on QCA955x and QCA956x, same register offset
and values.

Auto calibration is done on u-boot, but always fall back to default value
0x7. Add a DTS entry serdes-cal in case a device require another value.

Signed-off-by: Julien Dusser <julien.dusser@free.fr>
[Sander Vanheule:
    Minor code style fixes,
    Remove hunk adding qca956x-serdes-fixup to a missing DTS,
    Remove variable err that was only assigned,
    Rename function to sgmii_serdes_init,
    Lower priority of serdes call message to pr_debug]
Signed-off-by: Sander Vanheule <sander@svanheule.net>
---

diff --git a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c
index 7b292cc005..07d9992ca7 100644
--- a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c
+++ b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c
@@ -577,6 +577,77 @@ static void ag71xx_bit_clear(void __iomem *reg, u32 bit)
 	__raw_readl(reg);
 }
 
+static void ag71xx_sgmii_serdes_init_qca956x(struct device_node *np)
+{
+	struct device_node *np_dev;
+	void __iomem *gmac_base;
+	u32 serdes_cal;
+	u32 t;
+
+	np = of_get_child_by_name(np, "gmac-config");
+	if (!np)
+		return;
+
+	if (of_property_read_u32(np, "serdes-cal", &serdes_cal))
+		/* By default, use middle value for resistor calibration */
+		serdes_cal = 0x7;
+
+	np_dev = of_parse_phandle(np, "device", 0);
+	if (!np_dev)
+		goto out;
+
+	gmac_base = of_iomap(np_dev, 0);
+	if (!gmac_base) {
+		pr_err("%pOF: can't map GMAC registers\n", np_dev);
+		goto err_iomap;
+	}
+
+	pr_debug("%pOF: fixup SERDES calibration to value %i\n",
+		np_dev, serdes_cal);
+	t = __raw_readl(gmac_base + QCA956X_GMAC_REG_SGMII_SERDES);
+	t &= ~(QCA956X_SGMII_SERDES_RES_CALIBRATION_MASK
+			<< QCA956X_SGMII_SERDES_RES_CALIBRATION_SHIFT);
+	t |= (serdes_cal & QCA956X_SGMII_SERDES_RES_CALIBRATION_MASK)
+			<< QCA956X_SGMII_SERDES_RES_CALIBRATION_SHIFT;
+	__raw_writel(t, gmac_base + QCA956X_GMAC_REG_SGMII_SERDES);
+
+	ath79_pll_wr(QCA956X_PLL_ETH_SGMII_SERDES_REG,
+			QCA956X_PLL_ETH_SGMII_SERDES_LOCK_DETECT
+					| QCA956X_PLL_ETH_SGMII_SERDES_EN_PLL);
+
+	t = __raw_readl(gmac_base + QCA956X_GMAC_REG_SGMII_SERDES);
+
+	/* missing in QCA u-boot code, clear before setting */
+	t &= ~(QCA956X_SGMII_SERDES_CDR_BW_MASK
+			<< QCA956X_SGMII_SERDES_CDR_BW_SHIFT |
+		QCA956X_SGMII_SERDES_TX_DR_CTRL_MASK
+			<< QCA956X_SGMII_SERDES_TX_DR_CTRL_SHIFT |
+		QCA956X_SGMII_SERDES_VCO_REG_MASK
+			<< QCA956X_SGMII_SERDES_VCO_REG_SHIFT);
+
+	t |= (3 << QCA956X_SGMII_SERDES_CDR_BW_SHIFT) |
+		(1 << QCA956X_SGMII_SERDES_TX_DR_CTRL_SHIFT) |
+		QCA956X_SGMII_SERDES_PLL_BW |
+		QCA956X_SGMII_SERDES_EN_SIGNAL_DETECT |
+		QCA956X_SGMII_SERDES_FIBER_SDO |
+		(3 << QCA956X_SGMII_SERDES_VCO_REG_SHIFT);
+
+	__raw_writel(t, gmac_base + QCA956X_GMAC_REG_SGMII_SERDES);
+
+	ath79_device_reset_clear(QCA956X_RESET_SGMII_ANALOG);
+	ath79_device_reset_clear(QCA956X_RESET_SGMII);
+
+	while (!(__raw_readl(gmac_base + QCA956X_GMAC_REG_SGMII_SERDES)
+			& QCA956X_SGMII_SERDES_LOCK_DETECT_STATUS))
+		;
+
+	iounmap(gmac_base);
+err_iomap:
+	of_node_put(np_dev);
+out:
+	of_node_put(np);
+}
+
 static void ag71xx_sgmii_init_qca955x(struct device_node *np)
 {
 	struct device_node *np_dev;
@@ -1454,6 +1525,11 @@ static int ag71xx_probe(struct platform_device *pdev)
 	if (!res)
 		return -EINVAL;
 
+	if (of_property_read_bool(np, "qca956x-serdes-fixup")) {
+		ag71xx_sgmii_serdes_init_qca956x(np);
+		ag71xx_sgmii_init_qca955x(np);
+	}
+
 	err = ag71xx_setup_gmac(np);
 	if (err)
 		return err;