From: Linus Walleij Date: Tue, 11 Aug 2020 11:11:08 +0000 (+0200) Subject: kernel: backport RTL8366RB patches X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8735997686a360545f5f1c6cb54d48e85dda7707;p=openwrt%2Fstaging%2Fneocturne.git kernel: backport RTL8366RB patches These upstream patches makes the RTL8366RB DSA switch work properly with OpenWrt, the D-Link DIR-685 gets network and can be used as a router, and the same should be applicable for any other device that want to enable the RTL8366RB through Device Tree. Signed-off-by: Linus Walleij --- diff --git a/target/linux/generic/backport-5.4/756-v5.8-net-dsa-rtl8366-Pass-GENMASK-signed-bits.patch b/target/linux/generic/backport-5.4/756-v5.8-net-dsa-rtl8366-Pass-GENMASK-signed-bits.patch new file mode 100644 index 0000000000..4c5d559e16 --- /dev/null +++ b/target/linux/generic/backport-5.4/756-v5.8-net-dsa-rtl8366-Pass-GENMASK-signed-bits.patch @@ -0,0 +1,27 @@ +From 733993f502f254912b1415e13f73651d9f2e74ef Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Sun, 5 Jul 2020 22:42:27 +0200 +Subject: [PATCH 1/5] net: dsa: rtl8366: Pass GENMASK() signed bits + +Oddly, GENMASK() requires signed bit numbers, so that it can compare +them for < 0. If passed an unsigned type, we get warnings about the +test never being true. + +Signed-off-by: Andrew Lunn +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/rtl8366.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/net/dsa/rtl8366.c ++++ b/drivers/net/dsa/rtl8366.c +@@ -285,7 +285,7 @@ int rtl8366_init_vlan(struct realtek_smi + /* For the CPU port, make all ports members of this + * VLAN. + */ +- mask = GENMASK(smi->num_ports - 1, 0); ++ mask = GENMASK((int)smi->num_ports - 1, 0); + else + /* For all other ports, enable itself plus the + * CPU port. diff --git a/target/linux/generic/backport-5.4/757-v5.8-net-dsa-tag_rtl4_a-Implement-Realtek-4-byte-A-tag.patch b/target/linux/generic/backport-5.4/757-v5.8-net-dsa-tag_rtl4_a-Implement-Realtek-4-byte-A-tag.patch new file mode 100644 index 0000000000..70d7000ba1 --- /dev/null +++ b/target/linux/generic/backport-5.4/757-v5.8-net-dsa-tag_rtl4_a-Implement-Realtek-4-byte-A-tag.patch @@ -0,0 +1,232 @@ +From 078ced30af696b52a450a016a16eb47499d68117 Mon Sep 17 00:00:00 2001 +From: Linus Walleij +Date: Wed, 8 Jul 2020 14:25:36 +0200 +Subject: [PATCH 2/5] net: dsa: tag_rtl4_a: Implement Realtek 4 byte A tag + +This implements the known parts of the Realtek 4 byte +tag protocol version 0xA, as found in the RTL8366RB +DSA switch. + +It is designated as protocol version 0xA as a +different Realtek 4 byte tag format with protocol +version 0x9 is known to exist in the Realtek RTL8306 +chips. + +The tag and switch chip lacks public documentation, so +the tag format has been reverse-engineered from +packet dumps. As only ingress traffic has been available +for analysis an egress tag has not been possible to +develop (even using educated guesses about bit fields) +so this is as far as it gets. It is not known if the +switch even supports egress tagging. + +Excessive attempts to figure out the egress tag format +was made. When nothing else worked, I just tried all bit +combinations with 0xannp where a is protocol and p is +port. I looped through all values several times trying +to get a response from ping, without any positive +result. + +Using just these ingress tags however, the switch +functionality is vastly improved and the packets find +their way into the destination port without any +tricky VLAN configuration. On the D-Link DIR-685 the +LAN ports now come up and respond to ping without +any command line configuration so this is a real +improvement for users. + +Egress packets need to be restricted to the proper +target ports using VLAN, which the RTL8366RB DSA +switch driver already sets up. + +Cc: DENG Qingfang +Cc: Mauri Sandberg +Reviewed-by: Andrew Lunn +Reviewed-by: Florian Fainelli +Signed-off-by: Linus Walleij +Signed-off-by: David S. Miller +--- + include/net/dsa.h | 2 + + net/dsa/Kconfig | 7 +++ + net/dsa/Makefile | 1 + + net/dsa/tag_rtl4_a.c | 130 +++++++++++++++++++++++++++++++++++++++++++ + 4 files changed, 140 insertions(+) + create mode 100644 net/dsa/tag_rtl4_a.c + +--- a/include/net/dsa.h ++++ b/include/net/dsa.h +@@ -42,6 +42,7 @@ struct phylink_link_state; + #define DSA_TAG_PROTO_8021Q_VALUE 12 + #define DSA_TAG_PROTO_SJA1105_VALUE 13 + #define DSA_TAG_PROTO_KSZ8795_VALUE 14 ++#define DSA_TAG_PROTO_RTL4_A_VALUE 17 + + enum dsa_tag_protocol { + DSA_TAG_PROTO_NONE = DSA_TAG_PROTO_NONE_VALUE, +@@ -59,6 +60,7 @@ enum dsa_tag_protocol { + DSA_TAG_PROTO_8021Q = DSA_TAG_PROTO_8021Q_VALUE, + DSA_TAG_PROTO_SJA1105 = DSA_TAG_PROTO_SJA1105_VALUE, + DSA_TAG_PROTO_KSZ8795 = DSA_TAG_PROTO_KSZ8795_VALUE, ++ DSA_TAG_PROTO_RTL4_A = DSA_TAG_PROTO_RTL4_A_VALUE, + }; + + struct packet_type; +--- a/net/dsa/Kconfig ++++ b/net/dsa/Kconfig +@@ -80,6 +80,13 @@ config NET_DSA_TAG_KSZ + Say Y if you want to enable support for tagging frames for the + Microchip 8795/9477/9893 families of switches. + ++config NET_DSA_TAG_RTL4_A ++ tristate "Tag driver for Realtek 4 byte protocol A tags" ++ help ++ Say Y or M if you want to enable support for tagging frames for the ++ Realtek switches with 4 byte protocol A tags, sich as found in ++ the Realtek RTL8366RB. ++ + config NET_DSA_TAG_QCA + tristate "Tag driver for Qualcomm Atheros QCA8K switches" + help +--- a/net/dsa/Makefile ++++ b/net/dsa/Makefile +@@ -10,6 +10,7 @@ obj-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa + obj-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o + obj-$(CONFIG_NET_DSA_TAG_GSWIP) += tag_gswip.o + obj-$(CONFIG_NET_DSA_TAG_KSZ) += tag_ksz.o ++obj-$(CONFIG_NET_DSA_TAG_RTL4_A) += tag_rtl4_a.o + obj-$(CONFIG_NET_DSA_TAG_LAN9303) += tag_lan9303.o + obj-$(CONFIG_NET_DSA_TAG_MTK) += tag_mtk.o + obj-$(CONFIG_NET_DSA_TAG_QCA) += tag_qca.o +--- /dev/null ++++ b/net/dsa/tag_rtl4_a.c +@@ -0,0 +1,130 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Handler for Realtek 4 byte DSA switch tags ++ * Currently only supports protocol "A" found in RTL8366RB ++ * Copyright (c) 2020 Linus Walleij ++ * ++ * This "proprietary tag" header looks like so: ++ * ++ * ------------------------------------------------- ++ * | MAC DA | MAC SA | 0x8899 | 2 bytes tag | Type | ++ * ------------------------------------------------- ++ * ++ * The 2 bytes tag form a 16 bit big endian word. The exact ++ * meaning has been guessed from packet dumps from ingress ++ * frames, as no working egress traffic has been available ++ * we do not know the format of the egress tags or if they ++ * are even supported. ++ */ ++ ++#include ++#include ++ ++#include "dsa_priv.h" ++ ++#define RTL4_A_HDR_LEN 4 ++#define RTL4_A_ETHERTYPE 0x8899 ++#define RTL4_A_PROTOCOL_SHIFT 12 ++/* ++ * 0x1 = Realtek Remote Control protocol (RRCP) ++ * 0x2/0x3 seems to be used for loopback testing ++ * 0x9 = RTL8306 DSA protocol ++ * 0xa = RTL8366RB DSA protocol ++ */ ++#define RTL4_A_PROTOCOL_RTL8366RB 0xa ++ ++static struct sk_buff *rtl4a_tag_xmit(struct sk_buff *skb, ++ struct net_device *dev) ++{ ++ /* ++ * Just let it pass thru, we don't know if it is possible ++ * to tag a frame with the 0x8899 ethertype and direct it ++ * to a specific port, all attempts at reverse-engineering have ++ * ended up with the frames getting dropped. ++ * ++ * The VLAN set-up needs to restrict the frames to the right port. ++ * ++ * If you have documentation on the tagging format for RTL8366RB ++ * (tag type A) then please contribute. ++ */ ++ return skb; ++} ++ ++static struct sk_buff *rtl4a_tag_rcv(struct sk_buff *skb, ++ struct net_device *dev, ++ struct packet_type *pt) ++{ ++ u16 protport; ++ __be16 *p; ++ u16 etype; ++ u8 *tag; ++ u8 prot; ++ u8 port; ++ ++ if (unlikely(!pskb_may_pull(skb, RTL4_A_HDR_LEN))) ++ return NULL; ++ ++ /* The RTL4 header has its own custom Ethertype 0x8899 and that ++ * starts right at the beginning of the packet, after the src ++ * ethernet addr. Apparantly skb->data always points 2 bytes in, ++ * behind the Ethertype. ++ */ ++ tag = skb->data - 2; ++ p = (__be16 *)tag; ++ etype = ntohs(*p); ++ if (etype != RTL4_A_ETHERTYPE) { ++ /* Not custom, just pass through */ ++ netdev_dbg(dev, "non-realtek ethertype 0x%04x\n", etype); ++ return skb; ++ } ++ p = (__be16 *)(tag + 2); ++ protport = ntohs(*p); ++ /* The 4 upper bits are the protocol */ ++ prot = (protport >> RTL4_A_PROTOCOL_SHIFT) & 0x0f; ++ if (prot != RTL4_A_PROTOCOL_RTL8366RB) { ++ netdev_err(dev, "unknown realtek protocol 0x%01x\n", prot); ++ return NULL; ++ } ++ port = protport & 0xff; ++ ++ skb->dev = dsa_master_find_slave(dev, 0, port); ++ if (!skb->dev) { ++ netdev_dbg(dev, "could not find slave for port %d\n", port); ++ return NULL; ++ } ++ ++ /* Remove RTL4 tag and recalculate checksum */ ++ skb_pull_rcsum(skb, RTL4_A_HDR_LEN); ++ ++ /* Move ethernet DA and SA in front of the data */ ++ memmove(skb->data - ETH_HLEN, ++ skb->data - ETH_HLEN - RTL4_A_HDR_LEN, ++ 2 * ETH_ALEN); ++ ++ skb->offload_fwd_mark = 1; ++ ++ return skb; ++} ++ ++static int rtl4a_tag_flow_dissect(const struct sk_buff *skb, __be16 *proto, ++ int *offset) ++{ ++ *offset = RTL4_A_HDR_LEN; ++ /* Skip past the tag and fetch the encapsulated Ethertype */ ++ *proto = ((__be16 *)skb->data)[1]; ++ ++ return 0; ++} ++ ++static const struct dsa_device_ops rtl4a_netdev_ops = { ++ .name = "rtl4a", ++ .proto = DSA_TAG_PROTO_RTL4_A, ++ .xmit = rtl4a_tag_xmit, ++ .rcv = rtl4a_tag_rcv, ++ .flow_dissect = rtl4a_tag_flow_dissect, ++ .overhead = RTL4_A_HDR_LEN, ++}; ++module_dsa_tag_driver(rtl4a_netdev_ops); ++ ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_RTL4_A); diff --git a/target/linux/generic/backport-5.4/758-v5.8-net-dsa-rtl8366rb-Support-the-CPU-DSA-tag.patch b/target/linux/generic/backport-5.4/758-v5.8-net-dsa-rtl8366rb-Support-the-CPU-DSA-tag.patch new file mode 100644 index 0000000000..b68c033bbe --- /dev/null +++ b/target/linux/generic/backport-5.4/758-v5.8-net-dsa-rtl8366rb-Support-the-CPU-DSA-tag.patch @@ -0,0 +1,100 @@ +From c633ba43b7a9c2bfdb992ffd198d4c661520466f Mon Sep 17 00:00:00 2001 +From: Linus Walleij +Date: Wed, 8 Jul 2020 14:25:37 +0200 +Subject: [PATCH 3/5] net: dsa: rtl8366rb: Support the CPU DSA tag + +This activates the support to use the CPU tag to properly +direct ingress traffic to the right port. + +Bit 15 in register RTL8368RB_CPU_CTRL_REG can be set to +1 to disable the insertion of the CPU tag which is what +the code currently does. The bit 15 define calls this +setting RTL8368RB_CPU_INSTAG which is confusing since the +inverse meaning is implied: programmers may think that +setting this bit to 1 will *enable* inserting the tag +rather than disabling it, so rename this setting in +bit 15 to RTL8368RB_CPU_NO_TAG which is more to the +point. + +After this e.g. ping works out-of-the-box with the +RTL8366RB. + +Cc: DENG Qingfang +Cc: Mauri Sandberg +Reviewed-by: Andrew Lunn +Reviewed-by: Florian Fainelli +Signed-off-by: Linus Walleij +Signed-off-by: David S. Miller +--- + drivers/net/dsa/Kconfig | 1 + + drivers/net/dsa/rtl8366rb.c | 31 ++++++++----------------------- + 2 files changed, 9 insertions(+), 23 deletions(-) + +--- a/drivers/net/dsa/Kconfig ++++ b/drivers/net/dsa/Kconfig +@@ -66,6 +66,7 @@ config NET_DSA_QCA8K + config NET_DSA_REALTEK_SMI + tristate "Realtek SMI Ethernet switch family support" + depends on NET_DSA ++ select NET_DSA_TAG_RTL4_A + select FIXED_PHY + select IRQ_DOMAIN + select REALTEK_PHY +--- a/drivers/net/dsa/rtl8366rb.c ++++ b/drivers/net/dsa/rtl8366rb.c +@@ -109,8 +109,8 @@ + /* CPU port control reg */ + #define RTL8368RB_CPU_CTRL_REG 0x0061 + #define RTL8368RB_CPU_PORTS_MSK 0x00FF +-/* Enables inserting custom tag length/type 0x8899 */ +-#define RTL8368RB_CPU_INSTAG BIT(15) ++/* Disables inserting custom tag length/type 0x8899 */ ++#define RTL8368RB_CPU_NO_TAG BIT(15) + + #define RTL8366RB_SMAR0 0x0070 /* bits 0..15 */ + #define RTL8366RB_SMAR1 0x0071 /* bits 16..31 */ +@@ -844,16 +844,14 @@ static int rtl8366rb_setup(struct dsa_sw + if (ret) + return ret; + +- /* Enable CPU port and enable inserting CPU tag ++ /* Enable CPU port with custom DSA tag 8899. + * +- * Disabling RTL8368RB_CPU_INSTAG here will change the behaviour +- * of the switch totally and it will start talking Realtek RRCP +- * internally. It is probably possible to experiment with this, +- * but then the kernel needs to understand and handle RRCP first. ++ * If you set RTL8368RB_CPU_NO_TAG (bit 15) in this registers ++ * the custom tag is turned off. + */ + ret = regmap_update_bits(smi->map, RTL8368RB_CPU_CTRL_REG, + 0xFFFF, +- RTL8368RB_CPU_INSTAG | BIT(smi->cpu_port)); ++ BIT(smi->cpu_port)); + if (ret) + return ret; + +@@ -966,21 +964,8 @@ static int rtl8366rb_setup(struct dsa_sw + static enum dsa_tag_protocol rtl8366_get_tag_protocol(struct dsa_switch *ds, + int port) + { +- /* For now, the RTL switches are handled without any custom tags. +- * +- * It is possible to turn on "custom tags" by removing the +- * RTL8368RB_CPU_INSTAG flag when enabling the port but what it +- * does is unfamiliar to DSA: ethernet frames of type 8899, the Realtek +- * Remote Control Protocol (RRCP) start to appear on the CPU port of +- * the device. So this is not the ordinary few extra bytes in the +- * frame. Instead it appears that the switch starts to talk Realtek +- * RRCP internally which means a pretty complex RRCP implementation +- * decoding and responding the RRCP protocol is needed to exploit this. +- * +- * The OpenRRCP project (dormant since 2009) have reverse-egineered +- * parts of the protocol. +- */ +- return DSA_TAG_PROTO_NONE; ++ /* This switch uses the 4 byte protocol A Realtek DSA tag */ ++ return DSA_TAG_PROTO_RTL4_A; + } + + static void rtl8366rb_adjust_link(struct dsa_switch *ds, int port,