From: John Crispin Date: Wed, 14 Aug 2013 19:35:27 +0000 (+0000) Subject: ramips: DIR-610-A1 Support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=871d333b26160a3765a0401a25bd70629008cf0d;p=openwrt%2Fsvn-archive%2Farchive.git ramips: DIR-610-A1 Support http://patchwork.openwrt.org/patch/3933/ Signed-off-by: Flavio Silveira SVN-Revision: 37785 --- diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 6ecb13352c..c0fdc88877 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -27,7 +27,7 @@ get_status_led() { d105) status_led="d105:red:power" ;; - dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-615-h1 | dir-615-d | dir-620-a1| dir-620-d1) + dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-610-a1 | dir-615-h1 | dir-615-d | dir-620-a1| dir-620-d1) status_led="d-link:green:status" ;; dir-645) diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 9e9e09be3d..a80ea4ff49 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -68,6 +68,7 @@ case "$FIRMWARE" in br6524n | \ carambola | \ d105 | \ + dir-610-a1 | \ dir-615-h1 | \ dir-620-a1 | \ dir-620-d1 | \ diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds index 7bec16f491..64c7c5e469 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds @@ -77,6 +77,7 @@ case $board in dir-810l) ucidef_set_led_default "power" "POWER" "dlink:green:power" "1" ;; + dir-610-a1 |\ esr-9753) set_wifi_led "rt2800pci-phy0::radio" ;; diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network index 1d77e7c886..e444ef246d 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/02_network +++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network @@ -77,6 +77,7 @@ ramips_setup_interfaces() ucidef_add_switch_vlan "switch0" "2" "0 6t" ;; + dir-610-a1 | \ dir-615-h1 | \ mzk-w300nh2) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" @@ -205,7 +206,8 @@ ramips_setup_macs() dir-300-b1 |\ dir-300-b2 |\ - dir-600-b1) + dir-600-b1 |\ + dir-610-a1) lan_mac=$(mtd_get_mac_binary devdata 16388) wan_mac=$(macaddr_add "$lan_mac" 1) ;; diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac index a0d9b6123b..44cab3aa19 100644 --- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac @@ -39,7 +39,8 @@ preinit_set_mac_address() { asl26555 |\ dir-300-b1 |\ dir-300-b2 |\ - dir-600-b1) + dir-600-b1 |\ + dir-610-a1) mac=$(mtd_get_mac_binary devdata 16388) ifconfig eth0 hw ether $mac 2>/dev/null ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 3ec44d2fff..066f3bdb40 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -73,6 +73,9 @@ ramips_board_detect() { *"DIR-600 B2") name="dir-600-b2" ;; + *"DIR-610 A1") + name="dir-610-a1" + ;; *"DIR-620 A1") name="dir-620-a1" ;; diff --git a/target/linux/ramips/dts/DIR-610-A1.dts b/target/linux/ramips/dts/DIR-610-A1.dts new file mode 100644 index 0000000000..ed5606af89 --- /dev/null +++ b/target/linux/ramips/dts/DIR-610-A1.dts @@ -0,0 +1,100 @@ +/dts-v1/; + +/include/ "rt5350.dtsi" + +/ { + compatible = "DIR-610-A1", "ralink,rt5350-soc"; + model = "D-Link DIR-610 A1"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "jtag", "uartlite", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "f25l32pa", "m25p80"; + reg = <0 0>; + linux,modalias = "m25p80"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "devdata"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x1f>; + ralink,led-polarity = <0>; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "d-link:green:status"; + gpios = <&gpio0 9 1>; + }; + wps { + label = "d-link:green:wps"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index ccae6bee77..18f0fe5e0e 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -280,6 +280,8 @@ endif # RT305X Profiles # +Image/Build/Profile/DIR610A1=$(call BuildFirmware/Seama/$(1),$(1),dir-610-a1,DIR-610-A1,wrgn59_dlob.hans_dir610,ralink_default_fw_size_4M) + edimax_3g6200n_mtd_size=3735552 Image/Build/Profile/3G6200N=$(call BuildFirmware/Edimax/$(1),$(1),3g-6200n,3G-6200N,$(edimax_3g6200n_mtd_size),CSYS,3G62,0x50000,0xc0000) @@ -505,6 +507,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/DIR-300-B1,$(1)) $(call Image/Build/Profile/DIR-600-B1,$(1)) $(call Image/Build/Profile/DIR-600-B2,$(1)) + $(call Image/Build/Profile/DIR610A1,$(1)) $(call Image/Build/Profile/DIR-615-D,$(1)) $(call Image/Build/Profile/DIR-620-A1,$(1)) $(call Image/Build/Profile/DIR-620-D1,$(1)) diff --git a/target/linux/ramips/rt305x/profiles/dlink.mk b/target/linux/ramips/rt305x/profiles/dlink.mk index 29d8b7c38a..877724d886 100644 --- a/target/linux/ramips/rt305x/profiles/dlink.mk +++ b/target/linux/ramips/rt305x/profiles/dlink.mk @@ -18,3 +18,13 @@ endef $(eval $(call Profile,DIR615H1)) +define Profile/DIR610A1 + NAME:=Dlink DIR-610 A1 + PACKAGES:=kmod-ledtrig-netdev kmod-ledtrig-timer +endef + +define Profile/DIR610A1/Description + Package set for Dlink DIR610 A1 board +endef + +$(eval $(call Profile,DIR610A1))