From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 19 Jun 2012 10:44:17 +0000 (+0000)
Subject: ar71xx: make AR8327 LEDs working on the DB120 board
X-Git-Tag: reboot~13548
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=86c6543259e1ea3c928dd88d5396fe5d43333c65;p=openwrt%2Fstaging%2Fjogo.git

ar71xx: make AR8327 LEDs working on the DB120 board

SVN-Revision: 32457
---

diff --git a/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch b/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch
index 01c3c9f1d5..cde9816925 100644
--- a/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch
+++ b/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch
@@ -62,7 +62,7 @@
  };
  
  static struct gpio_keys_button db120_gpio_keys[] __initdata = {
-@@ -76,66 +92,90 @@ static struct gpio_keys_button db120_gpi
+@@ -76,66 +92,99 @@ static struct gpio_keys_button db120_gpi
  	},
  };
  
@@ -84,6 +84,18 @@
 -		.max_speed_hz	= 25000000,
 -		.modalias	= "s25sl064a",
 -		.controller_data = &db120_spi0_data,
+-	}
++static struct ar8327_led_cfg db120_ar8327_led_cfg = {
++	.led_ctrl0 = 0x00000000,
++	.led_ctrl1 = 0xc737c737,
++	.led_ctrl2 = 0x00000000,
++	.led_ctrl3 = 0x00c30c00,
++	.open_drain = true,
+ };
+ 
+-static struct ath79_spi_platform_data db120_spi_data = {
+-	.bus_num	= 0,
+-	.num_chipselect	= 1,
 +static struct ar8327_platform_data db120_ar8327_data = {
 +	.pad0_cfg = &db120_ar8327_pad0_cfg,
 +	.cpuport_cfg = {
@@ -92,23 +104,20 @@
 +		.duplex = 1,
 +		.txpause = 1,
 +		.rxpause = 1,
- 	}
++	},
++	.led_cfg = &db120_ar8327_led_cfg,
  };
  
--static struct ath79_spi_platform_data db120_spi_data = {
--	.bus_num	= 0,
--	.num_chipselect	= 1,
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data db120_ath9k_data;
 +static struct mdio_board_info db120_mdio0_info[] = {
 +	{
 +		.bus_id = "ag71xx-mdio.0",
 +		.phy_addr = 0,
 +		.platform_data = &db120_ar8327_data,
 +	},
- };
++};
  
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data db120_ath9k_data;
--
 -static int db120_pci_plat_dev_init(struct pci_dev *dev)
 +static void __init db120_gmac_setup(void)
  {