From: Ed Swarthout Date: Thu, 9 Oct 2008 05:29:27 +0000 (-0500) Subject: mpc8572 additional end-point mode X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=86be510f7b5443e7e937f696bfbe037fdc740b15;p=project%2Fbcm63xx%2Fu-boot.git mpc8572 additional end-point mode mpc8572 supports all pcie controllers as end-points with cfg_host_agent=0. Include host_agent == 0 decode for end-point determination. This is not needed for the ds reference board since pcie3 will be a host in order to connect to the uli chip. Include it here as a reference for other mpc8572 boards. Signed-off-by: Ed Swarthout --- diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index 66a0874ef1..74f1df2723 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -245,7 +245,7 @@ void pci_init_board(void) extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pcie2_hose; int pcie_ep = (host_agent == 2) || (host_agent == 4) || - (host_agent == 6); + (host_agent == 6) || (host_agent == 0); int pcie_configured = io_sel & 4; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ @@ -301,7 +301,7 @@ void pci_init_board(void) volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pcie1_hose; - int pcie_ep = (host_agent == 1) || (host_agent == 4) || + int pcie_ep = (host_agent <= 1) || (host_agent == 4) || (host_agent == 5); int pcie_configured = io_sel & 6;