From: Francois Romieu Date: Sun, 11 May 2008 12:51:00 +0000 (+0200) Subject: r8169: remove non-napi code X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=865c652d6be9929927cabdc54b137b7541eb6612;p=openwrt%2Fstaging%2Fblogic.git r8169: remove non-napi code It will almost unavoidably cause some breakage but it is long overdue. The driver identification string has been updated, a lost tabulation and some unused code have been removed. Otherwise the code paths should stay the same. Signed-off-by: Francois Romieu Cc: Edward Hsu --- diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index d85b9d067597..84925915dce4 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2122,27 +2122,13 @@ config R8169 To compile this driver as a module, choose M here: the module will be called r8169. This is recommended. -config R8169_NAPI - bool "Use Rx Polling (NAPI) (EXPERIMENTAL)" - depends on R8169 && EXPERIMENTAL - help - NAPI is a new driver API designed to reduce CPU and interrupt load - when the driver is receiving lots of packets from the card. It is - still somewhat experimental and thus not yet enabled by default. - - If your estimated Rx load is 10kpps or more, or if the card will be - deployed on potentially unfriendly networks (e.g. in a firewall), - then say Y here. - - If in doubt, say N. - config R8169_VLAN bool "VLAN support" depends on R8169 && VLAN_8021Q ---help--- Say Y here for the r8169 driver to support the functions required by the kernel 802.1Q code. - + If in doubt, say Y. config SB1250_MAC diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 9086e819d742..cfe8829ed31f 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -28,13 +28,7 @@ #include #include -#ifdef CONFIG_R8169_NAPI -#define NAPI_SUFFIX "-NAPI" -#else -#define NAPI_SUFFIX "" -#endif - -#define RTL8169_VERSION "2.2LK" NAPI_SUFFIX +#define RTL8169_VERSION "2.3LK-NAPI" #define MODULENAME "r8169" #define PFX MODULENAME ": " @@ -57,16 +51,6 @@ #define TX_BUFFS_AVAIL(tp) \ (tp->dirty_tx + NUM_TX_DESC - tp->cur_tx - 1) -#ifdef CONFIG_R8169_NAPI -#define rtl8169_rx_skb netif_receive_skb -#define rtl8169_rx_hwaccel_skb vlan_hwaccel_receive_skb -#define rtl8169_rx_quota(count, quota) min(count, quota) -#else -#define rtl8169_rx_skb netif_rx -#define rtl8169_rx_hwaccel_skb vlan_hwaccel_rx -#define rtl8169_rx_quota(count, quota) count -#endif - /* Maximum events (Rx packets, etc.) to handle at each interrupt. */ static const int max_interrupt_work = 20; @@ -394,9 +378,7 @@ struct rtl8169_private { void __iomem *mmio_addr; /* memory map physical address */ struct pci_dev *pci_dev; /* Index of PCI device */ struct net_device *dev; -#ifdef CONFIG_R8169_NAPI struct napi_struct napi; -#endif spinlock_t lock; /* spin lock flag */ u32 msg_enable; int chipset; @@ -458,10 +440,7 @@ static int rtl8169_rx_interrupt(struct net_device *, struct rtl8169_private *, static int rtl8169_change_mtu(struct net_device *dev, int new_mtu); static void rtl8169_down(struct net_device *dev); static void rtl8169_rx_clear(struct rtl8169_private *tp); - -#ifdef CONFIG_R8169_NAPI static int rtl8169_poll(struct napi_struct *napi, int budget); -#endif static const unsigned int rtl8169_rx_config = (RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift); @@ -843,10 +822,11 @@ static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc, struct sk_buff *skb) { u32 opts2 = le32_to_cpu(desc->opts2); + struct vlan_group *vlgrp = tp->vlgrp; int ret; - if (tp->vlgrp && (opts2 & RxVlanTag)) { - rtl8169_rx_hwaccel_skb(skb, tp->vlgrp, swab16(opts2 & 0xffff)); + if (vlgrp && (opts2 & RxVlanTag)) { + vlan_hwaccel_receive_skb(skb, vlgrp, swab16(opts2 & 0xffff)); ret = 0; } else ret = -1; @@ -1764,9 +1744,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) dev->change_mtu = rtl8169_change_mtu; dev->set_mac_address = rtl_set_mac_address; -#ifdef CONFIG_R8169_NAPI netif_napi_add(dev, &tp->napi, rtl8169_poll, R8169_NAPI_WEIGHT); -#endif #ifdef CONFIG_R8169_VLAN dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; @@ -1887,9 +1865,7 @@ static int rtl8169_open(struct net_device *dev) if (retval < 0) goto err_release_ring_2; -#ifdef CONFIG_R8169_NAPI napi_enable(&tp->napi); -#endif rtl_hw_start(dev); @@ -2197,9 +2173,7 @@ static int rtl8169_change_mtu(struct net_device *dev, int new_mtu) if (ret < 0) goto out; -#ifdef CONFIG_R8169_NAPI napi_enable(&tp->napi); -#endif rtl_hw_start(dev); @@ -2391,17 +2365,13 @@ static void rtl8169_wait_for_quiescence(struct net_device *dev) synchronize_irq(dev->irq); /* Wait for any pending NAPI task to complete */ -#ifdef CONFIG_R8169_NAPI napi_disable(&tp->napi); -#endif rtl8169_irq_mask_and_ack(ioaddr); -#ifdef CONFIG_R8169_NAPI tp->intr_mask = 0xffff; RTL_W16(IntrMask, tp->intr_event); napi_enable(&tp->napi); -#endif } static void rtl8169_reinit_task(struct work_struct *work) @@ -2767,7 +2737,7 @@ static int rtl8169_rx_interrupt(struct net_device *dev, cur_rx = tp->cur_rx; rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx; - rx_left = rtl8169_rx_quota(rx_left, budget); + rx_left = min(rx_left, budget); for (; rx_left > 0; rx_left--, cur_rx++) { unsigned int entry = cur_rx % NUM_RX_DESC; @@ -2829,7 +2799,7 @@ static int rtl8169_rx_interrupt(struct net_device *dev, skb->protocol = eth_type_trans(skb, dev); if (rtl8169_rx_vlan_skb(tp, desc, skb) < 0) - rtl8169_rx_skb(skb); + netif_receive_skb(skb); dev->last_rx = jiffies; dev->stats.rx_bytes += pkt_size; @@ -2869,87 +2839,61 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance) { struct net_device *dev = dev_instance; struct rtl8169_private *tp = netdev_priv(dev); - int boguscnt = max_interrupt_work; void __iomem *ioaddr = tp->mmio_addr; - int status; int handled = 0; + int status; - do { - status = RTL_R16(IntrStatus); + status = RTL_R16(IntrStatus); - /* hotplug/major error/no more work/shared irq */ - if ((status == 0xFFFF) || !status) - break; + /* hotplug/major error/no more work/shared irq */ + if ((status == 0xffff) || !status) + goto out; - handled = 1; + handled = 1; - if (unlikely(!netif_running(dev))) { - rtl8169_asic_down(ioaddr); - goto out; - } + if (unlikely(!netif_running(dev))) { + rtl8169_asic_down(ioaddr); + goto out; + } - status &= tp->intr_mask; - RTL_W16(IntrStatus, - (status & RxFIFOOver) ? (status | RxOverflow) : status); + status &= tp->intr_mask; + RTL_W16(IntrStatus, + (status & RxFIFOOver) ? (status | RxOverflow) : status); - if (!(status & tp->intr_event)) - break; + if (!(status & tp->intr_event)) + goto out; - /* Work around for rx fifo overflow */ - if (unlikely(status & RxFIFOOver) && - (tp->mac_version == RTL_GIGA_MAC_VER_11)) { - netif_stop_queue(dev); - rtl8169_tx_timeout(dev); - break; - } + /* Work around for rx fifo overflow */ + if (unlikely(status & RxFIFOOver) && + (tp->mac_version == RTL_GIGA_MAC_VER_11)) { + netif_stop_queue(dev); + rtl8169_tx_timeout(dev); + goto out; + } - if (unlikely(status & SYSErr)) { - rtl8169_pcierr_interrupt(dev); - break; - } + if (unlikely(status & SYSErr)) { + rtl8169_pcierr_interrupt(dev); + goto out; + } - if (status & LinkChg) - rtl8169_check_link_status(dev, tp, ioaddr); + if (status & LinkChg) + rtl8169_check_link_status(dev, tp, ioaddr); -#ifdef CONFIG_R8169_NAPI - if (status & tp->napi_event) { - RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event); - tp->intr_mask = ~tp->napi_event; + if (status & tp->napi_event) { + RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event); + tp->intr_mask = ~tp->napi_event; if (likely(netif_rx_schedule_prep(dev, &tp->napi))) __netif_rx_schedule(dev, &tp->napi); - else if (netif_msg_intr(tp)) { - printk(KERN_INFO "%s: interrupt %04x in poll\n", - dev->name, status); - } - } - break; -#else - /* Rx interrupt */ - if (status & (RxOK | RxOverflow | RxFIFOOver)) - rtl8169_rx_interrupt(dev, tp, ioaddr, ~(u32)0); - - /* Tx interrupt */ - if (status & (TxOK | TxErr)) - rtl8169_tx_interrupt(dev, tp, ioaddr); -#endif - - boguscnt--; - } while (boguscnt > 0); - - if (boguscnt <= 0) { - if (netif_msg_intr(tp) && net_ratelimit() ) { - printk(KERN_WARNING - "%s: Too much work at interrupt!\n", dev->name); + else if (netif_msg_intr(tp)) { + printk(KERN_INFO "%s: interrupt %04x in poll\n", + dev->name, status); } - /* Clear all interrupt sources. */ - RTL_W16(IntrStatus, 0xffff); } out: return IRQ_RETVAL(handled); } -#ifdef CONFIG_R8169_NAPI static int rtl8169_poll(struct napi_struct *napi, int budget) { struct rtl8169_private *tp = container_of(napi, struct rtl8169_private, napi); @@ -2975,7 +2919,6 @@ static int rtl8169_poll(struct napi_struct *napi, int budget) return work_done; } -#endif static void rtl8169_down(struct net_device *dev) { @@ -2987,9 +2930,7 @@ static void rtl8169_down(struct net_device *dev) netif_stop_queue(dev); -#ifdef CONFIG_R8169_NAPI napi_disable(&tp->napi); -#endif core_down: spin_lock_irq(&tp->lock);