From: Cliff Cai <cliff.cai@analog.com>
Date: Fri, 22 Jan 2010 04:02:46 +0000 (+0000)
Subject: Blackfin: mark MUSB VRSEL as active high for appropriate boards
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=85eb0e4b15efc8034cbae193c99536dae7896701;p=openwrt%2Fstaging%2Fblogic.git

Blackfin: mark MUSB VRSEL as active high for appropriate boards

These boards all have the GPIO VRSEL hooked up as an active high.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---

diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index ebe76d1e874a..f392af641657 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -98,6 +98,10 @@ static struct musb_hdrc_config musb_config = {
 	.num_eps	= 8,
 	.dma_channels	= 8,
 	.gpio_vrsel	= GPIO_PF11,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 55069af4f67d..606eb36b9d6e 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -62,6 +62,10 @@ static struct musb_hdrc_config musb_config = {
 	.num_eps	= 8,
 	.dma_channels	= 8,
 	.gpio_vrsel	= GPIO_PG13,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 923383386aa1..a05c967a24cf 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -102,6 +102,10 @@ static struct musb_hdrc_config musb_config = {
 	.num_eps	= 8,
 	.dma_channels	= 8,
 	.gpio_vrsel	= GPIO_PG13,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index f60c333fec66..dbb6b1d83f6d 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -498,6 +498,10 @@ static struct musb_hdrc_config musb_config = {
 	.num_eps	= 8,
 	.dma_channels	= 8,
 	.gpio_vrsel	= GPIO_PH6,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 06919db00a74..6fcfb9187c35 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -603,6 +603,10 @@ static struct musb_hdrc_config musb_config = {
 	.num_eps	= 8,
 	.dma_channels	= 8,
 	.gpio_vrsel	= GPIO_PE7,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
 };
 
 static struct musb_hdrc_platform_data musb_plat = {