From: andrew.vasquez@qlogic.com Date: Wed, 1 Feb 2006 00:05:17 +0000 (-0800) Subject: [SCSI] qla2xxx: Add support to retrieve/update HBA option-rom. X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=854165f4245c4a3b4a8cc363ba2050033151e196;p=openwrt%2Fstaging%2Fblogic.git [SCSI] qla2xxx: Add support to retrieve/update HBA option-rom. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 73d10b35091e..92b3e13e9061 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -179,6 +179,135 @@ static struct bin_attribute sysfs_nvram_attr = { .write = qla2x00_sysfs_write_nvram, }; +static ssize_t +qla2x00_sysfs_read_optrom(struct kobject *kobj, char *buf, loff_t off, + size_t count) +{ + struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj, + struct device, kobj))); + + if (ha->optrom_state != QLA_SREADING) + return 0; + if (off > ha->optrom_size) + return 0; + if (off + count > ha->optrom_size) + count = ha->optrom_size - off; + + memcpy(buf, &ha->optrom_buffer[off], count); + + return count; +} + +static ssize_t +qla2x00_sysfs_write_optrom(struct kobject *kobj, char *buf, loff_t off, + size_t count) +{ + struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj, + struct device, kobj))); + + if (ha->optrom_state != QLA_SWRITING) + return -EINVAL; + if (off > ha->optrom_size) + return -ERANGE; + if (off + count > ha->optrom_size) + count = ha->optrom_size - off; + + memcpy(&ha->optrom_buffer[off], buf, count); + + return count; +} + +static struct bin_attribute sysfs_optrom_attr = { + .attr = { + .name = "optrom", + .mode = S_IRUSR | S_IWUSR, + .owner = THIS_MODULE, + }, + .size = OPTROM_SIZE_24XX, + .read = qla2x00_sysfs_read_optrom, + .write = qla2x00_sysfs_write_optrom, +}; + +static ssize_t +qla2x00_sysfs_write_optrom_ctl(struct kobject *kobj, char *buf, loff_t off, + size_t count) +{ + struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj, + struct device, kobj))); + int val; + + if (off) + return 0; + + if (sscanf(buf, "%d", &val) != 1) + return -EINVAL; + + switch (val) { + case 0: + if (ha->optrom_state != QLA_SREADING && + ha->optrom_state != QLA_SWRITING) + break; + + ha->optrom_state = QLA_SWAITING; + vfree(ha->optrom_buffer); + ha->optrom_buffer = NULL; + break; + case 1: + if (ha->optrom_state != QLA_SWAITING) + break; + + ha->optrom_state = QLA_SREADING; + ha->optrom_buffer = (uint8_t *)vmalloc(ha->optrom_size); + if (ha->optrom_buffer == NULL) { + qla_printk(KERN_WARNING, ha, + "Unable to allocate memory for optrom retrieval " + "(%x).\n", ha->optrom_size); + + ha->optrom_state = QLA_SWAITING; + return count; + } + + memset(ha->optrom_buffer, 0, ha->optrom_size); + ha->isp_ops.read_optrom(ha, ha->optrom_buffer, 0, + ha->optrom_size); + break; + case 2: + if (ha->optrom_state != QLA_SWAITING) + break; + + ha->optrom_state = QLA_SWRITING; + ha->optrom_buffer = (uint8_t *)vmalloc(ha->optrom_size); + if (ha->optrom_buffer == NULL) { + qla_printk(KERN_WARNING, ha, + "Unable to allocate memory for optrom update " + "(%x).\n", ha->optrom_size); + + ha->optrom_state = QLA_SWAITING; + return count; + } + memset(ha->optrom_buffer, 0, ha->optrom_size); + break; + case 3: + if (ha->optrom_state != QLA_SWRITING) + break; + + ha->isp_ops.write_optrom(ha, ha->optrom_buffer, 0, + ha->optrom_size); + break; + } + return count; +} + +static struct bin_attribute sysfs_optrom_ctl_attr = { + .attr = { + .name = "optrom_ctl", + .mode = S_IWUSR, + .owner = THIS_MODULE, + }, + .size = 0, + .write = qla2x00_sysfs_write_optrom_ctl, +}; + void qla2x00_alloc_sysfs_attr(scsi_qla_host_t *ha) { @@ -186,6 +315,9 @@ qla2x00_alloc_sysfs_attr(scsi_qla_host_t *ha) sysfs_create_bin_file(&host->shost_gendev.kobj, &sysfs_fw_dump_attr); sysfs_create_bin_file(&host->shost_gendev.kobj, &sysfs_nvram_attr); + sysfs_create_bin_file(&host->shost_gendev.kobj, &sysfs_optrom_attr); + sysfs_create_bin_file(&host->shost_gendev.kobj, + &sysfs_optrom_ctl_attr); } void @@ -195,6 +327,9 @@ qla2x00_free_sysfs_attr(scsi_qla_host_t *ha) sysfs_remove_bin_file(&host->shost_gendev.kobj, &sysfs_fw_dump_attr); sysfs_remove_bin_file(&host->shost_gendev.kobj, &sysfs_nvram_attr); + sysfs_remove_bin_file(&host->shost_gendev.kobj, &sysfs_optrom_attr); + sysfs_remove_bin_file(&host->shost_gendev.kobj, + &sysfs_optrom_ctl_attr); if (ha->beacon_blink_led == 1) ha->isp_ops.beacon_off(ha); diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 7cb8b5a5e659..b31a03bbd14f 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2214,6 +2214,11 @@ struct isp_operations { int (*beacon_on) (struct scsi_qla_host *); int (*beacon_off) (struct scsi_qla_host *); void (*beacon_blink) (struct scsi_qla_host *); + + uint8_t * (*read_optrom) (struct scsi_qla_host *, uint8_t *, + uint32_t, uint32_t); + int (*write_optrom) (struct scsi_qla_host *, uint8_t *, uint32_t, + uint32_t); }; /* @@ -2505,6 +2510,14 @@ typedef struct scsi_qla_host { uint8_t *port_name; uint32_t isp_abort_cnt; + /* Option ROM information. */ + char *optrom_buffer; + uint32_t optrom_size; + int optrom_state; +#define QLA_SWAITING 0 +#define QLA_SREADING 1 +#define QLA_SWRITING 2 + /* Needed for BEACON */ uint16_t beacon_blink_led; uint8_t beacon_color_state; @@ -2582,7 +2595,9 @@ struct _qla2x00stats { /* * Flash support definitions */ -#define FLASH_IMAGE_SIZE 131072 +#define OPTROM_SIZE_2300 0x20000 +#define OPTROM_SIZE_2322 0x100000 +#define OPTROM_SIZE_24XX 0x100000 #include "qla_gbl.h" #include "qla_dbg.h" diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index eb35198bc8cf..ffdc2680f049 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -79,6 +79,8 @@ extern int qla2x00_down_timeout(struct semaphore *, unsigned long); extern struct fw_blob *qla2x00_request_firmware(scsi_qla_host_t *); +extern int qla2x00_wait_for_hba_online(scsi_qla_host_t *); + /* * Global Function Prototypes in qla_iocb.c source file. */ @@ -240,6 +242,15 @@ extern int qla24xx_beacon_on(struct scsi_qla_host *); extern int qla24xx_beacon_off(struct scsi_qla_host *); extern void qla24xx_beacon_blink(struct scsi_qla_host *); +extern uint8_t *qla2x00_read_optrom_data(struct scsi_qla_host *, uint8_t *, + uint32_t, uint32_t); +extern int qla2x00_write_optrom_data(struct scsi_qla_host *, uint8_t *, + uint32_t, uint32_t); +extern uint8_t *qla24xx_read_optrom_data(struct scsi_qla_host *, uint8_t *, + uint32_t, uint32_t); +extern int qla24xx_write_optrom_data(struct scsi_qla_host *, uint8_t *, + uint32_t, uint32_t); + /* * Global Function Prototypes in qla_dbg.c source file. */ diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 57179dabcccf..495ccbc7f8cb 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -513,7 +513,7 @@ qla2x00_eh_wait_on_command(scsi_qla_host_t *ha, struct scsi_cmnd *cmd) * Success (Adapter is online) : 0 * Failed (Adapter is offline/disabled) : 1 */ -static int +int qla2x00_wait_for_hba_online(scsi_qla_host_t *ha) { int return_status; @@ -1271,6 +1271,9 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) fc_port_t *fcport; struct scsi_host_template *sht; +if (PCI_FUNC(pdev->devfn)) + goto probe_out; + if (pci_enable_device(pdev)) goto probe_out; @@ -1313,6 +1316,7 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) ha->init_cb_size = sizeof(init_cb_t); ha->mgmt_svr_loop_id = MANAGEMENT_SERVER; ha->link_data_rate = LDR_UNKNOWN; + ha->optrom_size = OPTROM_SIZE_2300; /* Assign ISP specific operations. */ ha->isp_ops.pci_config = qla2100_pci_config; @@ -1340,6 +1344,8 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) ha->isp_ops.write_nvram = qla2x00_write_nvram_data; ha->isp_ops.fw_dump = qla2100_fw_dump; ha->isp_ops.ascii_fw_dump = qla2100_ascii_fw_dump; + ha->isp_ops.read_optrom = qla2x00_read_optrom_data; + ha->isp_ops.write_optrom = qla2x00_write_optrom_data; if (IS_QLA2100(ha)) { host->max_id = MAX_TARGETS_2100; ha->mbx_count = MAILBOX_REGISTER_COUNT_2100; @@ -1369,6 +1375,8 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) ha->isp_ops.beacon_off = qla2x00_beacon_off; ha->isp_ops.beacon_blink = qla2x00_beacon_blink; ha->gid_list_info_size = 6; + if (IS_QLA2322(ha) || IS_QLA6322(ha)) + ha->optrom_size = OPTROM_SIZE_2322; } else if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) { host->max_id = MAX_TARGETS_2200; ha->mbx_count = MAILBOX_REGISTER_COUNT; @@ -1404,10 +1412,13 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) ha->isp_ops.write_nvram = qla24xx_write_nvram_data; ha->isp_ops.fw_dump = qla24xx_fw_dump; ha->isp_ops.ascii_fw_dump = qla24xx_ascii_fw_dump; + ha->isp_ops.read_optrom = qla24xx_read_optrom_data; + ha->isp_ops.write_optrom = qla24xx_write_optrom_data; ha->isp_ops.beacon_on = qla24xx_beacon_on; ha->isp_ops.beacon_off = qla24xx_beacon_off; ha->isp_ops.beacon_blink = qla24xx_beacon_blink; ha->gid_list_info_size = 8; + ha->optrom_size = OPTROM_SIZE_24XX; } host->can_queue = ha->request_q_length + 128; @@ -2073,6 +2084,8 @@ qla2x00_mem_free(scsi_qla_host_t *ha) ha->fw_dumped = 0; ha->fw_dump_reading = 0; ha->fw_dump_buffer = NULL; + + vfree(ha->optrom_buffer); } /* diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 3105bb93cc19..3866a5760f15 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -989,3 +989,672 @@ qla24xx_beacon_off(struct scsi_qla_host *ha) return QLA_SUCCESS; } + + +/* + * Flash support routines + */ + +/** + * qla2x00_flash_enable() - Setup flash for reading and writing. + * @ha: HA context + */ +static void +qla2x00_flash_enable(scsi_qla_host_t *ha) +{ + uint16_t data; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + data = RD_REG_WORD(®->ctrl_status); + data |= CSR_FLASH_ENABLE; + WRT_REG_WORD(®->ctrl_status, data); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ +} + +/** + * qla2x00_flash_disable() - Disable flash and allow RISC to run. + * @ha: HA context + */ +static void +qla2x00_flash_disable(scsi_qla_host_t *ha) +{ + uint16_t data; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + data = RD_REG_WORD(®->ctrl_status); + data &= ~(CSR_FLASH_ENABLE); + WRT_REG_WORD(®->ctrl_status, data); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ +} + +/** + * qla2x00_read_flash_byte() - Reads a byte from flash + * @ha: HA context + * @addr: Address in flash to read + * + * A word is read from the chip, but, only the lower byte is valid. + * + * Returns the byte read from flash @addr. + */ +static uint8_t +qla2x00_read_flash_byte(scsi_qla_host_t *ha, uint32_t addr) +{ + uint16_t data; + uint16_t bank_select; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + bank_select = RD_REG_WORD(®->ctrl_status); + + if (IS_QLA2322(ha) || IS_QLA6322(ha)) { + /* Specify 64K address range: */ + /* clear out Module Select and Flash Address bits [19:16]. */ + bank_select &= ~0xf8; + bank_select |= addr >> 12 & 0xf0; + bank_select |= CSR_FLASH_64K_BANK; + WRT_REG_WORD(®->ctrl_status, bank_select); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + + WRT_REG_WORD(®->flash_address, (uint16_t)addr); + data = RD_REG_WORD(®->flash_data); + + return (uint8_t)data; + } + + /* Setup bit 16 of flash address. */ + if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) { + bank_select |= CSR_FLASH_64K_BANK; + WRT_REG_WORD(®->ctrl_status, bank_select); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + } else if (((addr & BIT_16) == 0) && + (bank_select & CSR_FLASH_64K_BANK)) { + bank_select &= ~(CSR_FLASH_64K_BANK); + WRT_REG_WORD(®->ctrl_status, bank_select); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + } + + /* Always perform IO mapped accesses to the FLASH registers. */ + if (ha->pio_address) { + uint16_t data2; + + reg = (struct device_reg_2xxx __iomem *)ha->pio_address; + WRT_REG_WORD_PIO(®->flash_address, (uint16_t)addr); + do { + data = RD_REG_WORD_PIO(®->flash_data); + barrier(); + cpu_relax(); + data2 = RD_REG_WORD_PIO(®->flash_data); + } while (data != data2); + } else { + WRT_REG_WORD(®->flash_address, (uint16_t)addr); + data = qla2x00_debounce_register(®->flash_data); + } + + return (uint8_t)data; +} + +/** + * qla2x00_write_flash_byte() - Write a byte to flash + * @ha: HA context + * @addr: Address in flash to write + * @data: Data to write + */ +static void +qla2x00_write_flash_byte(scsi_qla_host_t *ha, uint32_t addr, uint8_t data) +{ + uint16_t bank_select; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + bank_select = RD_REG_WORD(®->ctrl_status); + if (IS_QLA2322(ha) || IS_QLA6322(ha)) { + /* Specify 64K address range: */ + /* clear out Module Select and Flash Address bits [19:16]. */ + bank_select &= ~0xf8; + bank_select |= addr >> 12 & 0xf0; + bank_select |= CSR_FLASH_64K_BANK; + WRT_REG_WORD(®->ctrl_status, bank_select); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + + WRT_REG_WORD(®->flash_address, (uint16_t)addr); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + WRT_REG_WORD(®->flash_data, (uint16_t)data); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + + return; + } + + /* Setup bit 16 of flash address. */ + if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) { + bank_select |= CSR_FLASH_64K_BANK; + WRT_REG_WORD(®->ctrl_status, bank_select); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + } else if (((addr & BIT_16) == 0) && + (bank_select & CSR_FLASH_64K_BANK)) { + bank_select &= ~(CSR_FLASH_64K_BANK); + WRT_REG_WORD(®->ctrl_status, bank_select); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + } + + /* Always perform IO mapped accesses to the FLASH registers. */ + if (ha->pio_address) { + reg = (struct device_reg_2xxx __iomem *)ha->pio_address; + WRT_REG_WORD_PIO(®->flash_address, (uint16_t)addr); + WRT_REG_WORD_PIO(®->flash_data, (uint16_t)data); + } else { + WRT_REG_WORD(®->flash_address, (uint16_t)addr); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + WRT_REG_WORD(®->flash_data, (uint16_t)data); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + } +} + +/** + * qla2x00_poll_flash() - Polls flash for completion. + * @ha: HA context + * @addr: Address in flash to poll + * @poll_data: Data to be polled + * @man_id: Flash manufacturer ID + * @flash_id: Flash ID + * + * This function polls the device until bit 7 of what is read matches data + * bit 7 or until data bit 5 becomes a 1. If that hapens, the flash ROM timed + * out (a fatal error). The flash book recommeds reading bit 7 again after + * reading bit 5 as a 1. + * + * Returns 0 on success, else non-zero. + */ +static int +qla2x00_poll_flash(scsi_qla_host_t *ha, uint32_t addr, uint8_t poll_data, + uint8_t man_id, uint8_t flash_id) +{ + int status; + uint8_t flash_data; + uint32_t cnt; + + status = 1; + + /* Wait for 30 seconds for command to finish. */ + poll_data &= BIT_7; + for (cnt = 3000000; cnt; cnt--) { + flash_data = qla2x00_read_flash_byte(ha, addr); + if ((flash_data & BIT_7) == poll_data) { + status = 0; + break; + } + + if (man_id != 0x40 && man_id != 0xda) { + if ((flash_data & BIT_5) && cnt > 2) + cnt = 2; + } + udelay(10); + barrier(); + } + return status; +} + +#define IS_OEM_001(ha) \ + ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2322 && \ + (ha)->pdev->subsystem_vendor == 0x1028 && \ + (ha)->pdev->subsystem_device == 0x0170) + +/** + * qla2x00_program_flash_address() - Programs a flash address + * @ha: HA context + * @addr: Address in flash to program + * @data: Data to be written in flash + * @man_id: Flash manufacturer ID + * @flash_id: Flash ID + * + * Returns 0 on success, else non-zero. + */ +static int +qla2x00_program_flash_address(scsi_qla_host_t *ha, uint32_t addr, uint8_t data, + uint8_t man_id, uint8_t flash_id) +{ + /* Write Program Command Sequence. */ + if (IS_OEM_001(ha)) { + qla2x00_write_flash_byte(ha, 0xaaa, 0xaa); + qla2x00_write_flash_byte(ha, 0x555, 0x55); + qla2x00_write_flash_byte(ha, 0xaaa, 0xa0); + qla2x00_write_flash_byte(ha, addr, data); + } else { + if (man_id == 0xda && flash_id == 0xc1) { + qla2x00_write_flash_byte(ha, addr, data); + if (addr & 0x7e) + return 0; + } else { + qla2x00_write_flash_byte(ha, 0x5555, 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); + qla2x00_write_flash_byte(ha, 0x5555, 0xa0); + qla2x00_write_flash_byte(ha, addr, data); + } + } + + udelay(150); + + /* Wait for write to complete. */ + return qla2x00_poll_flash(ha, addr, data, man_id, flash_id); +} + +/** + * qla2x00_erase_flash() - Erase the flash. + * @ha: HA context + * @man_id: Flash manufacturer ID + * @flash_id: Flash ID + * + * Returns 0 on success, else non-zero. + */ +static int +qla2x00_erase_flash(scsi_qla_host_t *ha, uint8_t man_id, uint8_t flash_id) +{ + /* Individual Sector Erase Command Sequence */ + if (IS_OEM_001(ha)) { + qla2x00_write_flash_byte(ha, 0xaaa, 0xaa); + qla2x00_write_flash_byte(ha, 0x555, 0x55); + qla2x00_write_flash_byte(ha, 0xaaa, 0x80); + qla2x00_write_flash_byte(ha, 0xaaa, 0xaa); + qla2x00_write_flash_byte(ha, 0x555, 0x55); + qla2x00_write_flash_byte(ha, 0xaaa, 0x10); + } else { + qla2x00_write_flash_byte(ha, 0x5555, 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); + qla2x00_write_flash_byte(ha, 0x5555, 0x80); + qla2x00_write_flash_byte(ha, 0x5555, 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); + qla2x00_write_flash_byte(ha, 0x5555, 0x10); + } + + udelay(150); + + /* Wait for erase to complete. */ + return qla2x00_poll_flash(ha, 0x00, 0x80, man_id, flash_id); +} + +/** + * qla2x00_erase_flash_sector() - Erase a flash sector. + * @ha: HA context + * @addr: Flash sector to erase + * @sec_mask: Sector address mask + * @man_id: Flash manufacturer ID + * @flash_id: Flash ID + * + * Returns 0 on success, else non-zero. + */ +static int +qla2x00_erase_flash_sector(scsi_qla_host_t *ha, uint32_t addr, + uint32_t sec_mask, uint8_t man_id, uint8_t flash_id) +{ + /* Individual Sector Erase Command Sequence */ + qla2x00_write_flash_byte(ha, 0x5555, 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); + qla2x00_write_flash_byte(ha, 0x5555, 0x80); + qla2x00_write_flash_byte(ha, 0x5555, 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); + if (man_id == 0x1f && flash_id == 0x13) + qla2x00_write_flash_byte(ha, addr & sec_mask, 0x10); + else + qla2x00_write_flash_byte(ha, addr & sec_mask, 0x30); + + udelay(150); + + /* Wait for erase to complete. */ + return qla2x00_poll_flash(ha, addr, 0x80, man_id, flash_id); +} + +/** + * qla2x00_get_flash_manufacturer() - Read manufacturer ID from flash chip. + * @man_id: Flash manufacturer ID + * @flash_id: Flash ID + */ +static void +qla2x00_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id, + uint8_t *flash_id) +{ + qla2x00_write_flash_byte(ha, 0x5555, 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); + qla2x00_write_flash_byte(ha, 0x5555, 0x90); + *man_id = qla2x00_read_flash_byte(ha, 0x0000); + *flash_id = qla2x00_read_flash_byte(ha, 0x0001); + qla2x00_write_flash_byte(ha, 0x5555, 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); + qla2x00_write_flash_byte(ha, 0x5555, 0xf0); +} + + +static inline void +qla2x00_suspend_hba(struct scsi_qla_host *ha) +{ + int cnt; + unsigned long flags; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + /* Suspend HBA. */ + scsi_block_requests(ha->host); + ha->isp_ops.disable_intrs(ha); + set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); + + /* Pause RISC. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + WRT_REG_WORD(®->hccr, HCCR_PAUSE_RISC); + RD_REG_WORD(®->hccr); + if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) { + for (cnt = 0; cnt < 30000; cnt++) { + if ((RD_REG_WORD(®->hccr) & HCCR_RISC_PAUSE) != 0) + break; + udelay(100); + } + } else { + udelay(10); + } + spin_unlock_irqrestore(&ha->hardware_lock, flags); +} + +static inline void +qla2x00_resume_hba(struct scsi_qla_host *ha) +{ + /* Resume HBA. */ + clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); + set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); + up(ha->dpc_wait); + qla2x00_wait_for_hba_online(ha); + scsi_unblock_requests(ha->host); +} + +uint8_t * +qla2x00_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf, + uint32_t offset, uint32_t length) +{ + unsigned long flags; + uint32_t addr, midpoint; + uint8_t *data; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + /* Suspend HBA. */ + qla2x00_suspend_hba(ha); + + /* Go with read. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + midpoint = ha->optrom_size / 2; + + qla2x00_flash_enable(ha); + WRT_REG_WORD(®->nvram, 0); + RD_REG_WORD(®->nvram); /* PCI Posting. */ + for (addr = offset, data = buf; addr < length; addr++, data++) { + if (addr == midpoint) { + WRT_REG_WORD(®->nvram, NVR_SELECT); + RD_REG_WORD(®->nvram); /* PCI Posting. */ + } + + *data = qla2x00_read_flash_byte(ha, addr); + } + qla2x00_flash_disable(ha); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + /* Resume HBA. */ + qla2x00_resume_hba(ha); + + return buf; +} + +int +qla2x00_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf, + uint32_t offset, uint32_t length) +{ + + int rval; + unsigned long flags; + uint8_t man_id, flash_id, sec_number, data; + uint16_t wd; + uint32_t addr, liter, sec_mask, rest_addr; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + /* Suspend HBA. */ + qla2x00_suspend_hba(ha); + + rval = QLA_SUCCESS; + sec_number = 0; + + /* Reset ISP chip. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + WRT_REG_WORD(®->ctrl_status, CSR_ISP_SOFT_RESET); + pci_read_config_word(ha->pdev, PCI_COMMAND, &wd); + + /* Go with write. */ + qla2x00_flash_enable(ha); + do { /* Loop once to provide quick error exit */ + /* Structure of flash memory based on manufacturer */ + if (IS_OEM_001(ha)) { + /* OEM variant with special flash part. */ + man_id = flash_id = 0; + rest_addr = 0xffff; + sec_mask = 0x10000; + goto update_flash; + } + qla2x00_get_flash_manufacturer(ha, &man_id, &flash_id); + switch (man_id) { + case 0x20: /* ST flash. */ + if (flash_id == 0xd2 || flash_id == 0xe3) { + /* + * ST m29w008at part - 64kb sector size with + * 32kb,8kb,8kb,16kb sectors at memory address + * 0xf0000. + */ + rest_addr = 0xffff; + sec_mask = 0x10000; + break; + } + /* + * ST m29w010b part - 16kb sector size + * Default to 16kb sectors + */ + rest_addr = 0x3fff; + sec_mask = 0x1c000; + break; + case 0x40: /* Mostel flash. */ + /* Mostel v29c51001 part - 512 byte sector size. */ + rest_addr = 0x1ff; + sec_mask = 0x1fe00; + break; + case 0xbf: /* SST flash. */ + /* SST39sf10 part - 4kb sector size. */ + rest_addr = 0xfff; + sec_mask = 0x1f000; + break; + case 0xda: /* Winbond flash. */ + /* Winbond W29EE011 part - 256 byte sector size. */ + rest_addr = 0x7f; + sec_mask = 0x1ff80; + break; + case 0xc2: /* Macronix flash. */ + /* 64k sector size. */ + if (flash_id == 0x38 || flash_id == 0x4f) { + rest_addr = 0xffff; + sec_mask = 0x10000; + break; + } + /* Fall through... */ + + case 0x1f: /* Atmel flash. */ + /* 512k sector size. */ + if (flash_id == 0x13) { + rest_addr = 0x7fffffff; + sec_mask = 0x80000000; + break; + } + /* Fall through... */ + + case 0x01: /* AMD flash. */ + if (flash_id == 0x38 || flash_id == 0x40 || + flash_id == 0x4f) { + /* Am29LV081 part - 64kb sector size. */ + /* Am29LV002BT part - 64kb sector size. */ + rest_addr = 0xffff; + sec_mask = 0x10000; + break; + } else if (flash_id == 0x3e) { + /* + * Am29LV008b part - 64kb sector size with + * 32kb,8kb,8kb,16kb sector at memory address + * h0xf0000. + */ + rest_addr = 0xffff; + sec_mask = 0x10000; + break; + } else if (flash_id == 0x20 || flash_id == 0x6e) { + /* + * Am29LV010 part or AM29f010 - 16kb sector + * size. + */ + rest_addr = 0x3fff; + sec_mask = 0x1c000; + break; + } else if (flash_id == 0x6d) { + /* Am29LV001 part - 8kb sector size. */ + rest_addr = 0x1fff; + sec_mask = 0x1e000; + break; + } + default: + /* Default to 16 kb sector size. */ + rest_addr = 0x3fff; + sec_mask = 0x1c000; + break; + } + +update_flash: + if (IS_QLA2322(ha) || IS_QLA6322(ha)) { + if (qla2x00_erase_flash(ha, man_id, flash_id)) { + rval = QLA_FUNCTION_FAILED; + break; + } + } + + for (addr = offset, liter = 0; liter < length; liter++, + addr++) { + data = buf[liter]; + /* Are we at the beginning of a sector? */ + if ((addr & rest_addr) == 0) { + if (IS_QLA2322(ha) || IS_QLA6322(ha)) { + if (addr >= 0x10000UL) { + if (((addr >> 12) & 0xf0) && + ((man_id == 0x01 && + flash_id == 0x3e) || + (man_id == 0x20 && + flash_id == 0xd2))) { + sec_number++; + if (sec_number == 1) { + rest_addr = + 0x7fff; + sec_mask = + 0x18000; + } else if ( + sec_number == 2 || + sec_number == 3) { + rest_addr = + 0x1fff; + sec_mask = + 0x1e000; + } else if ( + sec_number == 4) { + rest_addr = + 0x3fff; + sec_mask = + 0x1c000; + } + } + } + } else if (addr == ha->optrom_size / 2) { + WRT_REG_WORD(®->nvram, NVR_SELECT); + RD_REG_WORD(®->nvram); + } + + if (flash_id == 0xda && man_id == 0xc1) { + qla2x00_write_flash_byte(ha, 0x5555, + 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, + 0x55); + qla2x00_write_flash_byte(ha, 0x5555, + 0xa0); + } else if (!IS_QLA2322(ha) && !IS_QLA6322(ha)) { + /* Then erase it */ + if (qla2x00_erase_flash_sector(ha, + addr, sec_mask, man_id, + flash_id)) { + rval = QLA_FUNCTION_FAILED; + break; + } + if (man_id == 0x01 && flash_id == 0x6d) + sec_number++; + } + } + + if (man_id == 0x01 && flash_id == 0x6d) { + if (sec_number == 1 && + addr == (rest_addr - 1)) { + rest_addr = 0x0fff; + sec_mask = 0x1f000; + } else if (sec_number == 3 && (addr & 0x7ffe)) { + rest_addr = 0x3fff; + sec_mask = 0x1c000; + } + } + + if (qla2x00_program_flash_address(ha, addr, data, + man_id, flash_id)) { + rval = QLA_FUNCTION_FAILED; + break; + } + } + } while (0); + qla2x00_flash_disable(ha); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + /* Resume HBA. */ + qla2x00_resume_hba(ha); + + return rval; +} + +uint8_t * +qla24xx_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf, + uint32_t offset, uint32_t length) +{ + /* Suspend HBA. */ + scsi_block_requests(ha->host); + ha->isp_ops.disable_intrs(ha); + set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); + + /* Go with read. */ + qla24xx_read_flash_data(ha, (uint32_t *)buf, offset >> 2, length >> 2); + + /* Resume HBA. */ + clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); + ha->isp_ops.enable_intrs(ha); + scsi_unblock_requests(ha->host); + + return buf; +} + +int +qla24xx_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf, + uint32_t offset, uint32_t length) +{ + int rval; + + /* Suspend HBA. */ + scsi_block_requests(ha->host); + ha->isp_ops.disable_intrs(ha); + set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); + + /* Go with write. */ + rval = qla24xx_write_flash_data(ha, (uint32_t *)buf, offset >> 2, + length >> 2); + + /* Resume HBA -- RISC reset needed. */ + clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); + set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); + up(ha->dpc_wait); + qla2x00_wait_for_hba_online(ha); + scsi_unblock_requests(ha->host); + + return rval; +}