From: Alan Stern Date: Wed, 27 Mar 2013 20:14:46 +0000 (-0400) Subject: USB: remove CONFIG_USB_SUSPEND option X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=84ebc10294a3d7be4c66f51070b7aedbaa24de9b;p=openwrt%2Fstaging%2Fblogic.git USB: remove CONFIG_USB_SUSPEND option This patch (as1675) removes the CONFIG_USB_SUSPEND option, essentially replacing it everywhere with CONFIG_PM_RUNTIME (except for one place in hub.c, where it is replaced with CONFIG_PM because the code needs to be used in both runtime and system PM). The net result is code shrinkage and simplification. There's very little point in keeping CONFIG_USB_SUSPEND because almost everybody enables it. The few that don't will find that the usbcore module has gotten somewhat bigger and they will have to take active measures if they want to prevent hubs from being runtime suspended. Signed-off-by: Alan Stern CC: Peter Chen Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index f70c1a1694ad..175701a2dae4 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -38,22 +38,6 @@ config USB_DYNAMIC_MINORS If you are unsure about this, say N here. -config USB_SUSPEND - bool "USB runtime power management (autosuspend) and wakeup" - depends on USB && PM_RUNTIME - help - If you say Y here, you can use driver calls or the sysfs - "power/control" file to enable or disable autosuspend for - individual USB peripherals (see - Documentation/usb/power-management.txt for more details). - - Also, USB "remote wakeup" signaling is supported, whereby some - USB devices (like keyboards and network adapters) can wake up - their parent hub. That wakeup cascades up the USB tree, and - could wake the system from states like suspend-to-RAM. - - If you are unsure about this, say N here. - config USB_OTG bool "OTG support" depends on USB diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index eb1d00a3543a..84d2b0585810 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1412,7 +1412,7 @@ int usb_resume(struct device *dev, pm_message_t msg) #endif /* CONFIG_PM */ -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME /** * usb_enable_autosuspend - allow a USB device to be autosuspended @@ -1780,7 +1780,7 @@ int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable) return ret; } -#endif /* CONFIG_USB_SUSPEND */ +#endif /* CONFIG_PM_RUNTIME */ struct bus_type usb_bus_type = { .name = "usb", diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index f9ec44cbb82f..d53547d2e4c7 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2125,7 +2125,7 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) #endif /* CONFIG_PM */ -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME /* Workqueue routine for root-hub remote wakeup */ static void hcd_resume_work(struct work_struct *work) @@ -2160,7 +2160,7 @@ void usb_hcd_resume_root_hub (struct usb_hcd *hcd) } EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub); -#endif /* CONFIG_USB_SUSPEND */ +#endif /* CONFIG_PM_RUNTIME */ /*-------------------------------------------------------------------------*/ @@ -2336,7 +2336,7 @@ struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver, init_timer(&hcd->rh_timer); hcd->rh_timer.function = rh_timer_func; hcd->rh_timer.data = (unsigned long) hcd; -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME INIT_WORK(&hcd->wakeup_work, hcd_resume_work); #endif @@ -2590,7 +2590,7 @@ error_create_attr_group: hcd->rh_registered = 0; spin_unlock_irq(&hcd_root_hub_lock); -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME cancel_work_sync(&hcd->wakeup_work); #endif mutex_lock(&usb_bus_list_lock); @@ -2645,7 +2645,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) hcd->rh_registered = 0; spin_unlock_irq (&hcd_root_hub_lock); -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME cancel_work_sync(&hcd->wakeup_work); #endif diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 443d5cc9330b..feef9351463d 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2827,7 +2827,7 @@ void usb_enable_ltm(struct usb_device *udev) } EXPORT_SYMBOL_GPL(usb_enable_ltm); -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM /* * usb_disable_function_remotewakeup - disable usb3.0 * device's function remote wakeup @@ -2886,7 +2886,7 @@ static int usb_disable_function_remotewakeup(struct usb_device *udev) * Linux (2.6) currently has NO mechanisms to initiate that: no khubd * timer, no SRP, no requests through sysfs. * - * If CONFIG_USB_SUSPEND isn't enabled, non-SuperSpeed devices really get + * If Runtime PM isn't enabled or used, non-SuperSpeed devices really get * suspended only when their bus goes into global suspend (i.e., the root * hub is suspended). Nevertheless, we change @udev->state to * USB_STATE_SUSPENDED as this is the device's "logical" state. The actual @@ -3247,6 +3247,10 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) return status; } +#endif /* CONFIG_PM */ + +#ifdef CONFIG_PM_RUNTIME + /* caller has locked udev */ int usb_remote_wakeup(struct usb_device *udev) { @@ -3263,38 +3267,6 @@ int usb_remote_wakeup(struct usb_device *udev) return status; } -#else /* CONFIG_USB_SUSPEND */ - -/* When CONFIG_USB_SUSPEND isn't set, we never suspend or resume any ports. */ - -int usb_port_suspend(struct usb_device *udev, pm_message_t msg) -{ - return 0; -} - -/* However we may need to do a reset-resume */ - -int usb_port_resume(struct usb_device *udev, pm_message_t msg) -{ - struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent); - int port1 = udev->portnum; - int status; - u16 portchange, portstatus; - - status = hub_port_status(hub, port1, &portstatus, &portchange); - status = check_port_resume_type(udev, - hub, port1, status, portchange, portstatus); - - if (status) { - dev_dbg(&udev->dev, "can't resume, status %d\n", status); - hub_port_logical_disconnect(hub, port1); - } else if (udev->reset_resume) { - dev_dbg(&udev->dev, "reset-resume\n"); - status = usb_reset_and_verify_device(udev); - } - return status; -} - #endif static int check_ports_changed(struct usb_hub *hub) @@ -4356,7 +4328,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, if (portstatus & USB_PORT_STAT_ENABLE) { status = 0; /* Nothing to do */ -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME } else if (udev->state == USB_STATE_SUSPENDED && udev->persist_enabled) { /* For a suspended device, treat this as a diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 797f9d514732..06c4894bf181 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -71,7 +71,7 @@ static void usb_port_device_release(struct device *dev) kfree(port_dev); } -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME static int usb_port_runtime_resume(struct device *dev) { struct usb_port *port_dev = to_usb_port(dev); @@ -139,7 +139,7 @@ static int usb_port_runtime_suspend(struct device *dev) #endif static const struct dev_pm_ops usb_port_pm_ops = { -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME .runtime_suspend = usb_port_runtime_suspend, .runtime_resume = usb_port_runtime_resume, .runtime_idle = pm_generic_runtime_idle, diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 3f81a3dc6867..aa38db44818a 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -338,7 +338,7 @@ static void remove_persist_attributes(struct device *dev) #endif /* CONFIG_PM */ -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME static ssize_t show_connected_duration(struct device *dev, struct device_attribute *attr, @@ -544,7 +544,7 @@ static void remove_power_attributes(struct device *dev) #define add_power_attributes(dev) 0 #define remove_power_attributes(dev) do {} while (0) -#endif /* CONFIG_USB_SUSPEND */ +#endif /* CONFIG_PM_RUNTIME */ /* Descriptor fields */ diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index f81b92572735..03eb7ae8fc1a 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -49,7 +49,7 @@ const char *usbcore_name = "usbcore"; static bool nousb; /* Disable USB when built into kernel image */ -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME static int usb_autosuspend_delay = 2; /* Default delay value, * in seconds */ module_param_named(autosuspend, usb_autosuspend_delay, int, 0644); @@ -307,7 +307,7 @@ static const struct dev_pm_ops usb_device_pm_ops = { .thaw = usb_dev_thaw, .poweroff = usb_dev_poweroff, .restore = usb_dev_restore, -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME .runtime_suspend = usb_runtime_suspend, .runtime_resume = usb_runtime_resume, .runtime_idle = usb_runtime_idle, diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index a7f20bde0e5e..823857767a16 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -93,7 +93,7 @@ static inline int usb_port_resume(struct usb_device *udev, pm_message_t msg) #endif -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME extern void usb_autosuspend_device(struct usb_device *udev); extern int usb_autoresume_device(struct usb_device *udev); diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 170b9399e09f..a573d5ff9adc 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -292,17 +292,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) } } -#ifdef CONFIG_USB_SUSPEND - /* REVISIT: the controller works fine for wakeup iff the root hub - * itself is "globally" suspended, but usbcore currently doesn't - * understand such things. - * - * System suspend currently expects to be able to suspend the entire - * device tree, device-at-a-time. If we failed selective suspend - * reports, system suspend would fail; so the root hub code must claim - * success. That's lying to usbcore, and it matters for runtime - * PM scenarios with selective suspend and remote wakeup... - */ +#ifdef CONFIG_PM_RUNTIME if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev)) ehci_warn(ehci, "selective suspend/wakeup unavailable\n"); #endif diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index db09dae7b557..60ff4220e8b4 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -580,14 +580,8 @@ static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port) /* See usb 7.1.7.5: root hubs must issue at least 50 msec reset signaling, * not necessarily continuous ... to guard against resume signaling. - * The short timeout is safe for non-root hubs, and is backward-compatible - * with earlier Linux hosts. */ -#ifdef CONFIG_USB_SUSPEND #define PORT_RESET_MSEC 50 -#else -#define PORT_RESET_MSEC 10 -#endif /* this timer value might be vendor-specific ... */ #define PORT_RESET_HW_MSEC 10 diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index d62f0404baaa..15ed7e8d887f 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1755,7 +1755,7 @@ sl811h_probe(struct platform_device *dev) /* for this device there's no useful distinction between the controller * and its root hub, except that the root hub only gets direct PM calls - * when CONFIG_USB_SUSPEND is enabled. + * when CONFIG_PM_RUNTIME is enabled. */ static int diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 5efdffe32365..5c124bf5d018 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -3141,10 +3141,11 @@ static int u132_probe(struct platform_device *pdev) #ifdef CONFIG_PM -/* for this device there's no useful distinction between the controller -* and its root hub, except that the root hub only gets direct PM calls -* when CONFIG_USB_SUSPEND is enabled. -*/ +/* + * for this device there's no useful distinction between the controller + * and its root hub, except that the root hub only gets direct PM calls + * when CONFIG_PM_RUNTIME is enabled. + */ static int u132_suspend(struct platform_device *pdev, pm_message_t state) { struct usb_hcd *hcd = platform_get_drvdata(pdev); diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 68914429482f..187a3ec1069a 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1075,7 +1075,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) set_bit(port_index, &bus_state->bus_suspended); } /* USB core sets remote wake mask for USB 3.0 hubs, - * including the USB 3.0 roothub, but only if CONFIG_USB_SUSPEND + * including the USB 3.0 roothub, but only if CONFIG_PM_RUNTIME * is enabled, so also enable remote wake here. */ if (hcd->self.root_hub->do_remote_wakeup) { diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 53b8f89a0b1c..5156b720a53a 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3801,7 +3801,7 @@ int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1) return raw_port; } -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME /* BESL to HIRD Encoding array for USB2 LPM */ static int xhci_besl_encoding[16] = {125, 150, 200, 300, 400, 500, 1000, 2000, @@ -4051,7 +4051,7 @@ int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) return 0; } -#endif /* CONFIG_USB_SUSPEND */ +#endif /* CONFIG_PM_RUNTIME */ /*---------------------- USB 3.0 Link PM functions ------------------------*/ diff --git a/include/linux/usb.h b/include/linux/usb.h index 8d4bc173d66a..a0bee5a28d1a 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -617,7 +617,7 @@ static inline bool usb_acpi_power_manageable(struct usb_device *hdev, int index) #endif /* USB autosuspend and autoresume */ -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME extern void usb_enable_autosuspend(struct usb_device *udev); extern void usb_disable_autosuspend(struct usb_device *udev); diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 59694b5e5e90..f5f5c7dfda90 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -84,7 +84,7 @@ struct usb_hcd { struct timer_list rh_timer; /* drives root-hub polling */ struct urb *status_urb; /* the current status urb */ -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME struct work_struct wakeup_work; /* for remote wakeup */ #endif @@ -593,14 +593,14 @@ extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg); extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg); #endif /* CONFIG_PM */ -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd); #else static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd) { return; } -#endif /* CONFIG_USB_SUSPEND */ +#endif /* CONFIG_PM_RUNTIME */ /*-------------------------------------------------------------------------*/