From: David Bauer <mail@david-bauer.net>
Date: Wed, 14 Aug 2019 22:29:45 +0000 (+0200)
Subject: ath79: use Power LED as System LED for TL-WR842Nv3
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=84c103509a7e5bd6ae99983b29f2cf665b254ef8;p=openwrt%2Fstaging%2Fblocktrron.git

ath79: use Power LED as System LED for TL-WR842Nv3

The TP-Link TL-WR842N v3 has a software-controllable Power LED. The WPS
LED is normally only used as a System LED, when the Power LED can't be
controlled by software.

Additionally, the Power LED is also the System LED for this board in
ar71xx.

Signed-off-by: David Bauer <mail@david-bauer.net>
---

diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wr842n-v3.dts b/target/linux/ath79/dts/qca9533_tplink_tl-wr842n-v3.dts
index 17fa09dc78..22d70af594 100644
--- a/target/linux/ath79/dts/qca9533_tplink_tl-wr842n-v3.dts
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wr842n-v3.dts
@@ -11,16 +11,16 @@
 	model = "TP-Link TL-WR842N v3";
 
 	aliases {
-		led-boot = &qss_led;
-		led-failsafe = &qss_led;
-		led-running = &qss_led;
-		led-upgrade = &qss_led;
+		led-boot = &power_led;
+		led-failsafe = &power_led;
+		led-running = &power_led;
+		led-upgrade = &power_led;
 	};
 
 	gpio_leds: leds {
 		compatible = "gpio-leds";
 
-		system: power {
+		power_led: power {
 			label = "tp-link:green:power";
 			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "on";
@@ -32,7 +32,7 @@
 			linux,default-trigger = "phy0tpt";
 		};
 
-		qss_led: qss {
+		qss {
 			label = "tp-link:green:qss";
 			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
 		};