From: Adrian Schmutzler Date: Thu, 27 Feb 2020 12:05:51 +0000 (+0100) Subject: kirkwood: apply minor DTS style improvements X-Git-Tag: v21.02.0-rc1~3718 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=845093e8a0abdcb6eb72047f8d093cd37d81482e;p=openwrt%2Fstaging%2Fchunkeey.git kirkwood: apply minor DTS style improvements This applies some minor DTS style improvements to the files kept in OpenWrt at the moment: - harmonize/improve LED/pinmux node names - harmonize empty lines between nodes - change "ok" to "okay" - some other minor formatting adjustments Since changes are only cosmetical, they are only applied to the "newer" DTS files for kernel 4.19. Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-goflexhome.dts b/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-goflexhome.dts index 6cb6f7249e..b0b69b46cd 100644 --- a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-goflexhome.dts +++ b/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-goflexhome.dts @@ -30,29 +30,33 @@ marvell,pins = "mpp29"; marvell,function = "gpio"; }; + pmx_led_white: pmx-led-white { marvell,pins = "mpp40"; marvell,function = "gpio"; }; + pmx_led_green: pmx-led_green { marvell,pins = "mpp46"; marvell,function = "gpio"; }; + pmx_led_orange: pmx-led-orange { marvell,pins = "mpp47"; marvell,function = "gpio"; }; }; + serial@12000 { - status = "ok"; + status = "okay"; }; sata@80000 { status = "okay"; nr-ports = <2>; }; - }; + gpio-leds { compatible = "gpio-leds"; @@ -61,20 +65,25 @@ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; default-state = "on"; }; + led_fault: fault { label = "status:orange:fault"; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; + misc { label = "status:white:misc"; gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; linux,default-trigger = "disk-activity"; }; }; + regulators { compatible = "simple-bus"; + #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_usb_power_enable>; pinctrl-names = "default"; @@ -93,18 +102,19 @@ }; &nand { - chip-delay = <40>; status = "okay"; + chip-delay = <40>; + partition@0 { label = "u-boot"; - reg = <0x0000000 0x100000>; + reg = <0x0000000 0x0100000>; read-only; }; partition@100000 { label = "ubi"; - reg = <0x100000 0x0ff00000>; + reg = <0x0100000 0xff00000>; }; }; @@ -118,6 +128,7 @@ ð0 { status = "okay"; + ethernet0-port@0 { phy-handle = <ðphy0>; }; diff --git a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-linksys-audi.dts b/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-linksys-audi.dts index ac9db1949c..0d00943dfd 100644 --- a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-linksys-audi.dts +++ b/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-linksys-audi.dts @@ -35,9 +35,10 @@ stdout-path = "serial0:115200n8"; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >; + + pinctrl-0 = <&pmx_btn_wps &pmx_btn_reset>; pinctrl-names = "default"; wps { @@ -55,7 +56,8 @@ gpio-leds { compatible = "gpio-leds"; - pinctrl-0 = < &pmx_led_green_power >; + + pinctrl-0 = <&pmx_led_green_power>; pinctrl-names = "default"; led_power: power { @@ -132,10 +134,12 @@ marvell,pins = "mpp7"; marvell,function = "gpo"; }; + pmx_btn_wps: pmx-btn-wps { marvell,pins = "mpp47"; marvell,function = "gpio"; }; + pmx_btn_reset: pmx-btn-reset { marvell,pins = "mpp48"; marvell,function = "gpio"; @@ -144,6 +148,7 @@ &nand { status = "okay"; + pinctrl-0 = <&pmx_nand>; pinctrl-names = "default"; @@ -197,7 +202,6 @@ label = "unused"; reg = <0x88000 0x178000>; }; - }; }; @@ -226,6 +230,7 @@ */ ð0 { status = "okay"; + ethernet0-port@0 { speed = <1000>; duplex = <1>; @@ -237,6 +242,7 @@ */ ð1 { status = "okay"; + ethernet1-port@0 { speed = <1000>; duplex = <1>; diff --git a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-nsa310b.dts b/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-nsa310b.dts index b06848576a..10b119eb01 100644 --- a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-nsa310b.dts +++ b/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-nsa310b.dts @@ -92,38 +92,47 @@ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; default-state = "on"; }; + led_red_sys: red-sys { label = "nsa310:red:sys"; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; + green-hdd { label = "nsa310:green:hdd"; gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; + red-hdd { label = "nsa310:red:hdd"; gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; + green-esata { label = "nsa310:green:esata"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; + red-esata { label = "nsa310:red:esata"; gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; + green-usb { label = "nsa310:green:usb"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; + red-usb { label = "nsa310:red:usb"; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; }; + green-copy { label = "nsa310:green:copy"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; + red-copy { label = "nsa310:red:copy"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; diff --git a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-on100.dts b/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-on100.dts index 6d45814050..5ae66ede2f 100644 --- a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-on100.dts +++ b/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-on100.dts @@ -25,8 +25,9 @@ stdout-path = "serial0:115200n8"; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; + pinctrl-0 = <&pmx_btn_reset>; pinctrl-names = "default"; @@ -39,26 +40,27 @@ gpio-leds { compatible = "gpio-leds"; - pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g >; + + pinctrl-0 = <&pmx_led_health_red &pmx_led_health_green>; pinctrl-names = "default"; - led_health_green: health_green { + led_health_green: health-green { label = "on100:green:health"; gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; default-state = "on"; }; - led_health_red: health_red { + led_health_red: health-red { label = "on100:red:health"; gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; }; - health2_green { + health2-green { label = "on100:green:health2"; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; - health2_red { + health2-red { label = "on100:red:health2"; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; @@ -128,27 +130,27 @@ }; &pinctrl { - pmx_led_health_r: pmx-led-health-r { + pmx_led_health_red: pmx-led-health-red { marvell,pins = "mpp45"; marvell,function = "gpio"; }; - pmx_led_health_g: pmx-led-health-g { + pmx_led_health_green: pmx-led-health-green { marvell,pins = "mpp44"; marvell,function = "gpio"; }; - pmx_led_health2_r: pmx-led-health2-r { + pmx_led_health2_red: pmx-led-health2-red { marvell,pins = "mpp47"; marvell,function = "gpio"; }; - pmx_led_health2_g: pmx-led-health2-g { + pmx_led_health2_green: pmx-led-health2-green { marvell,pins = "mpp46"; marvell,function = "gpio"; }; - pmx_btn_reset: pmx-led-reset { + pmx_btn_reset: pmx-btn-reset { marvell,pins = "mpp31"; marvell,function = "gpio"; };