From: Imre Kaloz Date: Wed, 12 Mar 2014 13:40:13 +0000 (+0000) Subject: Add GW2385 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8411a5703f449a929623b7c41ba8b216685e8018;p=openwrt%2Fstaging%2Fblocktrron.git Add GW2385 support Signed-off-by: Tim Harvey Signed-off-by: Imre Kaloz SVN-Revision: 39894 --- diff --git a/target/linux/cns3xxx/files/arch/arm/mach-cns3xxx/laguna.c b/target/linux/cns3xxx/files/arch/arm/mach-cns3xxx/laguna.c index 267b4c1caa..4903749c93 100644 --- a/target/linux/cns3xxx/files/arch/arm/mach-cns3xxx/laguna.c +++ b/target/linux/cns3xxx/files/arch/arm/mach-cns3xxx/laguna.c @@ -697,6 +697,21 @@ static struct gpio laguna_gpio_gw2387[] = { { 113, GPIOF_IN , "DIO5" }, }; +static struct gpio laguna_gpio_gw2385[] = { + { 0, GPIOF_IN , "*GSC_IRQ#" }, + { 1, GPIOF_OUT_INIT_HIGH, "*USB_HST_VBUS_EN" }, + { 2, GPIOF_IN , "*USB_HST_FAULT#" }, + { 5, GPIOF_IN , "*USB_OTG_FAULT#" }, + { 6, GPIOF_OUT_INIT_LOW , "*USB_HST_PCI_SEL" }, + { 7, GPIOF_OUT_INIT_LOW , "*GSM_SEL0" }, + { 8, GPIOF_OUT_INIT_LOW , "*GSM_SEL1" }, + { 9, GPIOF_OUT_INIT_LOW , "*SER_EN" }, + { 10, GPIOF_IN, "*USER_PB#" }, + { 11, GPIOF_OUT_INIT_HIGH, "*PERST#" }, + { 100, GPIOF_IN , "*USER_PB#" }, + { 103, GPIOF_OUT_INIT_HIGH, "V5_EN" }, +}; + static struct gpio laguna_gpio_gw2384[] = { { 0, GPIOF_IN , "*GSC_IRQ#" }, { 1, GPIOF_OUT_INIT_HIGH, "*USB_HST_VBUS_EN" }, @@ -953,6 +968,21 @@ static int __init laguna_model_setup(void) laguna_register_gpio(ARRAY_AND_SIZE(laguna_gpio_gw2387)); // configure LED's laguna_gpio_leds_data.num_leds = 2; + } else if (strncmp(laguna_info.model, "GW2385", 6) == 0) { + // configure GPIO's + laguna_register_gpio(ARRAY_AND_SIZE(laguna_gpio_gw2385)); + // configure LED's + laguna_gpio_leds[0].gpio = 115; + laguna_gpio_leds[1].gpio = 12; + laguna_gpio_leds[1].name = "red"; + laguna_gpio_leds[1].active_low = 0, + laguna_gpio_leds[2].gpio = 14; + laguna_gpio_leds[2].name = "green"; + laguna_gpio_leds[2].active_low = 0, + laguna_gpio_leds[3].gpio = 15; + laguna_gpio_leds[3].name = "blue"; + laguna_gpio_leds[3].active_low = 0, + laguna_gpio_leds_data.num_leds = 4; } else if (strncmp(laguna_info.model, "GW2384", 6) == 0) { // configure GPIO's laguna_register_gpio(ARRAY_AND_SIZE(laguna_gpio_gw2384));