From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 17 Dec 2010 17:10:01 +0000 (+0000)
Subject: ar71xx: UBNT Secondary MAC address duplicate fix
X-Git-Tag: reboot~18050
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8390b7dc9b1dd45dfc3a605c92ba3ff03ff0ff59;p=openwrt%2Fstaging%2Flynxis.git

ar71xx: UBNT Secondary MAC address duplicate fix

There is Secondary MAC address duplicate problem with some UBNT
RouterStation and RouterStation Pro HW batches as Primary MAC addresses
are not increased by 2 per device in board data. Fix is to use 'Locally
Administrated bit' for Secondary MAC address instead of increasing
Primary MAC addresses by 1 which could overlap with other device
Primary MAC address.

Signed-off-by: Kestutis Barkauskas<keba@devint.net>

SVN-Revision: 24643
---

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c
index feb913a63b..38095b2ea9 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c
@@ -133,6 +133,17 @@ static void __init ubnt_generic_setup(void)
 	pb42_pci_init();
 }
 
+/*
+ * There is Secondary MAC address duplicate problem with some UBNT HW batches.
+ * Do not increase Secondary MAC address by 1 but do workaround
+ * with 'Locally Administrated' bit.
+ */
+static void ubnt_init_secondary_mac(unsigned char *mac_base)
+{
+	ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac_base, 0);
+	ar71xx_eth1_data.mac_addr[0] |= 0x02;
+}
+
 #define UBNT_RS_WAN_PHYMASK	(1 << 20)
 #define UBNT_RS_LAN_PHYMASK	((1 << 16) | (1 << 17) | (1 << 18) | (1 << 19))
 
@@ -146,7 +157,7 @@ static void __init ubnt_rs_setup(void)
 	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
 	ar71xx_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK;
 
-	ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1);
+	ubnt_init_secondary_mac(ar71xx_mac_base);
 	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
 	ar71xx_eth1_data.speed = SPEED_100;
 	ar71xx_eth1_data.duplex = DUPLEX_FULL;
@@ -177,7 +188,7 @@ static void __init ubnt_rspro_setup(void)
 	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
 	ar71xx_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK;
 
-	ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1);
+	ubnt_init_secondary_mac(ar71xx_mac_base);
 	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
 	ar71xx_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK;
 	ar71xx_eth1_data.speed = SPEED_1000;