From: Franz Flasch Date: Thu, 17 May 2018 09:57:00 +0000 (+0200) Subject: ramips: add support for TP-Link Archer C2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8375623a0640;p=openwrt%2Fstaging%2Fnbd.git ramips: add support for TP-Link Archer C2 Specification: - System-On-Chip: MT7620A - CPU/Speed: 580 MHz - Flash-Chip: Winbond 25Q64BVSIG - Flash size: 8192 KiB - RAM: 64 MiB - Wireless No1: SoC-integrated: MT7620A 2.4GHz 802.11bgn - Wireless No2: On-board chip: MT7610EN 5GHz 802.11ac - Switch: RTL8367RB Gigabit Switch - USB: Yes 1 x 2.0 Preparing a TFTP recovery image for initial flashing: Currently the only method to install openwrt for the first time is via TFTP download in u-boot. After first install you can use regular updates. WARNING: This method also overwrites the bootloader partition! Create a TFTP recovery image: 1) Download a stock TP-Link Firmware file here: https://www.tp-link.com/en/download/Archer-C2_V1.html#Firmware 2) Extract u-boot from the binary file: #> dd if=c2v1_stock_firmware.bin of=c2v1_uboot.bin bs=1 skip=512 count=131072 3) Now merge the sysupgrade image and the u-boot into one binary: #> cat c2v1_uboot.bin openwrt-squashfs-sysupgrade.bin > ArcherC2V1_tp_recovery.bin The resulting image can be flashed via TFTP recovery mode. Flash instructions: 1) To flash the recovery image, start a TFTP server from IP address 192.168.0.66 and serve the recovery image named ArcherC2V1_tp_recovery.bin. 2) Connect your device to the LAN port, then press the WPS/Reset button and power it up. Keep pressing the WPS/Reset button for 10 seconds. It will try to download the recovery image and flash it. It can take up to 20-25 minutes to finish. When it reaches 100%, the router will reboot itself. Signed-off-by: Serge Vasilugin Signed-off-by: Franz Flasch --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 54504c6ee8..9ed834eb5b 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -398,6 +398,12 @@ tl-wr841n-v13) ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10" ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" ;; +tplink,c2-v1) + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x1e" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x01" + set_usb_led "$boardname:green:usb" "2-1" + set_wifi_led "$boardname:green:wlan" + ;; tplink,c20-v1) ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index d2c15f8f46..c5e5549e25 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -335,6 +335,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0" ;; + tplink,c2-v1) + ucidef_add_switch "switch1" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" + ;; tplink,tl-wr902ac-v3) ucidef_add_switch "switch0" \ "4:lan" "6@eth0" diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 2f51add331..dd7a646a04 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -79,6 +79,7 @@ get_status_led() { awapn2403|\ dir-645|\ sk-wb8|\ + tplink,c2-v1|\ wrh-300cr) status_led="$boardname:green:wps" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index ffdc5e73e0..26236047b4 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -253,6 +253,7 @@ platform_check_image() { c20i|\ c50|\ mr200|\ + tplink,c2-v1|\ tplink,c20-v1|\ tplink,c20-v4|\ tplink,c50-v3|\ diff --git a/target/linux/ramips/dts/ArcherC2-v1.dts b/target/linux/ramips/dts/ArcherC2-v1.dts new file mode 100644 index 0000000000..6af75e39ce --- /dev/null +++ b/target/linux/ramips/dts/ArcherC2-v1.dts @@ -0,0 +1,178 @@ +/dts-v1/; + +/include/ "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "tplink,c2-v1", "ralink,mt7620a-soc"; + model = "TP-Link Archer C2 v1"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + lan { + label = "c2-v1:green:lan"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "c2-v1:green:usb"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "c2-v1:green:wps"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "c2-v1:green:wan"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "c2-v1:green:wlan"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset_wps { + label = "reset_wps"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + rfkill { + label = "rfkill"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + rtl8367rb { + compatible = "realtek,rtl8367b", "rtl8367b"; + cpu_port = <6>; + realtek,extif1 = <1 0 1 1 1 1 1 1 2>; + mii-bus = <&mdio0>; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x7a0000>; + }; + + partition@7c0000 { + label = "config"; + reg = <0x7c0000 0x10000>; + read-only; + }; + + rom: partition@7d0000 { + label = "rom"; + reg = <0x7d0000 0x10000>; + read-only; + }; + + partition@7e0000 { + label = "romfile"; + reg = <0x7e0000 0x10000>; + read-only; + }; + + radio: partition@7f0000 { + label = "radio"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; +}; + +ðernet { + status = "okay"; + mtd-mac-address = <&rom 0xf100>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; + + port@5 { + status = "okay"; + mediatek,fixed-link = <1000 1 1 1>; + phy-mode = "rgmii"; + }; + + mdio0: mdio-bus { + status = "okay"; + }; +}; + + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&wmac { + ralink,mtd-eeprom = <&radio 0>; + mtd-mac-address = <&rom 0xf100>; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&pcie { + status = "okay"; + + pcie-bridge { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&radio 0x8000>; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index b6499c8806..325e3104a7 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -472,6 +472,18 @@ define Device/tiny-ac endef TARGET_DEVICES += tiny-ac +define Device/tplink_c2-v1 + $(Device/Archer) + DTS := ArcherC2-v1 + TPLINK_FLASHLAYOUT := 8Mmtk + TPLINK_HWID := 0xc7500001 + TPLINK_HWREV := 50 + IMAGES += factory.bin + DEVICE_TITLE := TP-Link Archer C2 v1 + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-switch-rtl8366-smi kmod-switch-rtl8367b +endef +TARGET_DEVICES += tplink_c2-v1 + define Device/tplink_c20-v1 $(Device/Archer) DTS := ArcherC20v1