From: Jo-Philipp Wich Date: Wed, 17 May 2017 12:36:23 +0000 (+0200) Subject: brcm47xx: remove target specific network preinit config X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=833c500cb2985e9b76a1aae3b6a577977eee5457;p=openwrt%2Fstaging%2Fmkresin.git brcm47xx: remove target specific network preinit config The generic preinit code is now able to setup network and switch vlan settings from the /etc/board.json file, therefor drop the target specific code. Fixes FS#790. Signed-off-by: Jo-Philipp Wich --- diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm deleted file mode 100644 index 4b0d0eb674..0000000000 --- a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/sh - -preinit_iface() { - ifname=eth0 - - # hardware specific overrides - case "$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo)" in - "Asus WLHDD") ifname=eth1;; - "Asus WL300G") ifname=eth1;; - esac - - local try=0; - while [ $((try++)) -le 5 ] && [ ! -f /sys/class/net/$ifname/operstate ]; do sleep 1; done -} - -boot_hook_add preinit_main preinit_iface diff --git a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm deleted file mode 100644 index f40e160b3b..0000000000 --- a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/sh - -preinit_ip() { - # if the preinit interface isn't specified and ifname is set in - # preinit.arch use that interface - if [ -z "$pi_ifname" ]; then - pi_ifname=$ifname - fi - - [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && { - ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up - - local try=0; - while [ $((try++)) -le 5 ] && [ ! "$(cat /sys/class/net/$pi_ifname/operstate)" = "up" ]; do sleep 1; done - } -}