From: Christian Lamparter Date: Fri, 24 Dec 2021 13:44:08 +0000 (+0100) Subject: apm821xx: fix WD MyBook Live DUO USB-Port X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=832b9cbd741cdb6cc8483b2cddfef6de000ec61d;p=openwrt%2Fstaging%2Fneocturne.git apm821xx: fix WD MyBook Live DUO USB-Port where to begin? the USB regulator settings were just a part of the issue. With them changed, according to the forum it still failed when a USB device was connected to the port with: dwc2 4bff80000.usbotg: dwc2_restore_global_registers: no global registers to restore dwc2 4bff80000.usbotg: dwc2_exit_partial_power_down: failed to restore registers dwc2 4bff80000.usbotg: exit partial_power_down failed dwc2 4bff80000.usbotg: HC died; cleaning up One clue was found upstream in commit cc10ce0c51b1 ("usb: dwc2: disable power_down on Amlogic devices") |Disable power_down by setting the parameter to |DWC2_POWER_DOWN_PARAM_NONE. This fixes a problem on various Amlogic |Meson SoCs where USB devices are only recognized when plugged in before |booting Linux. A hot-plugged USB device was not detected even though the |device got power (my USB thumb drive for example has an LED which lit |up). |[...] the same method proposed there worked with APM821xx's USB IP-Core. Link: https://forum.openwrt.org/t/wd-my-book-duo-usb/111926/2 Reported-by: thwe and takimata (openwrt forum) Fixes: b70d3557e05 ("apm821xx: clean up gpio-hogs") Signed-off-by: Christian Lamparter --- diff --git a/target/linux/apm821xx/dts/wd-mybooklive.dts b/target/linux/apm821xx/dts/wd-mybooklive.dts index c96e7f75e9..2cc4dd8b79 100644 --- a/target/linux/apm821xx/dts/wd-mybooklive.dts +++ b/target/linux/apm821xx/dts/wd-mybooklive.dts @@ -123,9 +123,11 @@ usbpwr: usb-regulator { compatible = "regulator-fixed"; regulator-name = "Power USB Core"; - gpios = <&GPIO1 2 GPIO_ACTIVE_LOW>; + gpios = <&GPIO1 2 GPIO_ACTIVE_HIGH>; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + regulator-boot-on; /* uboot sets this */ + enable-active-high; }; sata1pwr: sata1-regulator { diff --git a/target/linux/apm821xx/patches-5.10/100-dwc2-disable-powerdown.patch b/target/linux/apm821xx/patches-5.10/100-dwc2-disable-powerdown.patch new file mode 100644 index 0000000000..ede7d732ff --- /dev/null +++ b/target/linux/apm821xx/patches-5.10/100-dwc2-disable-powerdown.patch @@ -0,0 +1,29 @@ +From 88ca61467a0897c79b1fbf8f5c30691b43b52613 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Sun, 26 Dec 2021 22:36:29 +0200 +Subject: [PATCH] dwc2: temporary force to be powered up all times + +the APM821xx's onchip dwc2 misbehaves with 5.4 and 5.10 +when a USB device gets connected. Instead of announcing +and setting up the USB devices it crashes and burns with: + +[ 22.023476] dwc2 4bff80000.usbotg: dwc2_restore_global_registers: no global registers to restore +[ 22.032245] dwc2 4bff80000.usbotg: dwc2_exit_partial_power_down: failed to restore registers +[ 22.040647] dwc2 4bff80000.usbotg: exit partial_power_down failed +[ 22.058765] dwc2 4bff80000.usbotg: HC died; cleaning up + +This is all seemingly fixed with dwc2 from a 5.16-rc6. + +Signed-off-by: Christian Lamparter +--- + +--- a/drivers/usb/dwc2/params.c ++++ b/drivers/usb/dwc2/params.c +@@ -137,6 +137,7 @@ static void dwc2_set_amcc_params(struct + struct dwc2_core_params *p = &hsotg->params; + + p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT; ++ p->power_down = DWC2_POWER_DOWN_PARAM_NONE; + } + + static void dwc2_set_stm32f4x9_fsotg_params(struct dwc2_hsotg *hsotg)