From: John Crispin <john@openwrt.org>
Date: Mon, 18 Nov 2013 09:35:41 +0000 (+0000)
Subject: ralink: add support for ralink mt7620 nand eval board
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=82e624279818643f58b92a88277f6a9eb1fd7ed0;p=openwrt%2Fstaging%2Fflorian.git

ralink: add support for ralink mt7620 nand eval board

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38848
---

diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index c93561fb0f..972f41534f 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -268,6 +268,9 @@ ramips_board_detect() {
 	*"HG255D")
 		name="hg255d"
 		;;
+	*"V22SG")
+		name="v22sg"
+		;;
 	*)
 		name="generic"
 		;;
diff --git a/target/linux/ramips/dts/MT7620a_V22SG.dts b/target/linux/ramips/dts/MT7620a_V22SG.dts
new file mode 100644
index 0000000000..cec912df3b
--- /dev/null
+++ b/target/linux/ramips/dts/MT7620a_V22SG.dts
@@ -0,0 +1,113 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
+	model = "Ralink MT7620a V22SG High Power evaluation board";
+
+	/*palmbus@10000000 {
+	};*/
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "uartf", "spi";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		status = "okay";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+		ralink,port-map = "llllw";
+
+		port@4 {
+			status = "okay";
+			phy-handle = <&phy4>;
+			phy-mode = "rgmii";
+		};
+
+		port@5 {
+			status = "okay";
+			phy-handle = <&phy5>;
+			phy-mode = "rgmii";
+		};
+
+		mdio-bus {
+			status = "okay";
+
+			phy4: ethernet-phy@4 {
+				reg = <4>;
+				phy-mode = "rgmii";
+			};
+
+			phy5: ethernet-phy@5 {
+				reg = <5>;
+				phy-mode = "rgmii";
+			};
+		};
+	};
+
+	gsw@10110000 {
+		ralink,port4 = "gmac";
+	};
+
+	pcie@10140000 {
+		status = "okay";
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 1>;
+			linux,code = <0x198>;
+		};
+		aoss {
+			label = "aoss";
+			gpios = <&gpio0 2 1>;
+			linux,code = <0x211>;
+		};
+	};
+
+	nand {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mtk,mt7620-nand";
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x40000>;
+			read-only;
+		};
+		partition@40000 {
+			label = "u-boot-env";
+			reg = <0x40000 0x20000>;
+			read-only;
+		};
+		factory: partition@60000 {
+			label = "factory";
+			reg = <0x60000 0x20000>;
+			read-only;
+		};
+		partition@80000 {
+			label = "firmware";
+			reg = <0x80000 0x7f80000>;
+		};
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 5d99736a3d..32047ccfed 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -613,6 +613,7 @@ endif
 Image/Build/Profile/MT7620a=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a,MT7620a)
 Image/Build/Profile/MT7620a_MT7610e=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7610e,MT7620a_MT7610e)
 Image/Build/Profile/MT7620a_MT7530=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7530,MT7620a_MT7530)
+Image/Build/Profile/MT7620a_V22SG=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_v22sg,MT7620a_V22SG)
 Image/Build/Profile/RP-N53=$(call BuildFirmware/Default8M/$(1),$(1),rp_n53,RP-N53)
 whr_300hp2_mtd_size=7012352
 Image/Build/Profile/WHR-300HP2=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-300hp2,WHR-300HP2,$(whr_300hp2_mtd_size))
@@ -625,6 +626,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/MT7620a,$(1))
 	$(call Image/Build/Profile/MT7620a_MT7610e,$(1))
 	$(call Image/Build/Profile/MT7620a_MT7530,$(1))
+	$(call Image/Build/Profile/MT7620a_V22SG,$(1))
 	$(call Image/Build/Profile/RP-N53,$(1))
 	$(call Image/Build/Profile/DIR-810L,$(1))
 	$(call Image/Build/Profile/WHR-300HP2,$(1))