From: Dave Brand Date: Sat, 13 Apr 2024 19:36:07 +0000 (-0400) Subject: bcm27xx: add support for RPI A, A+, 3A+, Zero2 and Zero2W X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=820823198d16f31dd59d88ed0d963eafd103111a;p=openwrt%2Fstaging%2Fthess.git bcm27xx: add support for RPI A, A+, 3A+, Zero2 and Zero2W These devices were already supported. I merely added missing entries to: 1. make them easier to locate in firmware selector 2. allow firmware upgrades to proceed without dire warnings Sample dire warning contains: upgrade: Device raspberrypi,model-zero-2-w not supported by this image upgrade: Supported devices: rpi-3-b rpi-3-b-plus rpi-zero-2 \ raspberrypi,2-model-b-rev2 raspberrypi,3-model-b \ raspberrypi,3-model-b-plus raspberrypi,3-compute-module \ raspberrypi,compute-module-3 raspberrypi,model-zero-2 With this patch, the firmware upgrade proceeds normally. Signed-off-by: Dave Brand --- diff --git a/target/linux/bcm27xx/image/Makefile b/target/linux/bcm27xx/image/Makefile index deff607070..4586785bbd 100644 --- a/target/linux/bcm27xx/image/Makefile +++ b/target/linux/bcm27xx/image/Makefile @@ -71,7 +71,7 @@ define Device/Default endef define Device/rpi - DEVICE_MODEL := B/B+/CM/Zero/ZeroW + DEVICE_MODEL := A/A+/B/B+/CM/Zero/ZeroW ifdef CONFIG_LINUX_6_6 DEVICE_DTS := \ broadcom/bcm2708-rpi-b broadcom/bcm2708-rpi-b-rev1 broadcom/bcm2708-rpi-b-plus \ @@ -84,7 +84,11 @@ else bcm2708-rpi-zero bcm2708-rpi-zero-w endif SUPPORTED_DEVICES := \ - rpi-b rpi-b-plus rpi-cm rpi-zero rpi-zero-w \ + rpi-a rpi-a-plus \ + rpi-b rpi-b-plus \ + rpi-cm \ + rpi-zero rpi-zero-w \ + raspberrypi,model-a raspberrypi,model-a-plus \ raspberrypi,model-b raspberrypi,model-b-plus raspberrypi,model-b-rev2 \ raspberrypi,compute-module raspberrypi,compute-module-1 \ raspberrypi,model-zero raspberrypi,model-zero-w @@ -101,7 +105,7 @@ define Device/rpi-2 DEVICE_MODEL := 2B/2B 1.2 DEVICE_VARIANT := (32bit) DEVICE_ALT0_VENDOR := Raspberry Pi - DEVICE_ALT0_MODEL := 3B/3B+/CM3 + DEVICE_ALT0_MODEL := 3A+/3B/3B+/CM3/Zero2/Zero2W DEVICE_ALT0_VARIANT := (32bit) DEVICE_ALT1_VENDOR := Raspberry Pi DEVICE_ALT1_MODEL := 4B/400/CM4 @@ -119,15 +123,21 @@ else bcm2710-rpi-3-b bcm2710-rpi-3-b-plus \ bcm2711-rpi-4-b bcm2711-rpi-400 \ bcm2710-rpi-cm3 bcm2711-rpi-cm4 \ - bcm2710-rpi-zero-2 + bcm2710-rpi-zero-2 bcm2710-rpi-zero-2-w endif SUPPORTED_DEVICES := \ - rpi-2-b rpi-3-b rpi-3-b-plus rpi-cm rpi-zero-2 \ + rpi-2-b \ + rpi-3-a-plus \ + rpi-3-b rpi-3-b-plus \ + rpi-4-b rpi-400 \ + rpi-cm \ + rpi-zero-2 rpi-zero-2-w \ raspberrypi,2-model-b raspberrypi,2-model-b-rev2 \ + raspberrypi,3-model-a-plus \ raspberrypi,3-model-b raspberrypi,3-model-b-plus \ raspberrypi,3-compute-module raspberrypi,compute-module-3 \ raspberrypi,400 raspberrypi,4-compute-module raspberrypi,4-model-b \ - raspberrypi,model-zero-2 + raspberrypi,model-zero-2 raspberrypi,model-zero-2-w DEVICE_PACKAGES := \ cypress-firmware-43430-sdio \ brcmfmac-nvram-43430-sdio \ @@ -142,7 +152,7 @@ ifeq ($(SUBTARGET),bcm2709) endif define Device/rpi-3 - DEVICE_MODEL := 3B/3B+/CM3 + DEVICE_MODEL := 3A+/3B/3B+/CM3/Zero2/Zero2W DEVICE_VARIANT := (64bit) DEVICE_ALT0_VENDOR := Raspberry Pi DEVICE_ALT0_MODEL := 2B-1.2 @@ -152,13 +162,16 @@ define Device/rpi-3 broadcom/bcm2710-rpi-2-b \ broadcom/bcm2710-rpi-3-b broadcom/bcm2710-rpi-3-b-plus \ broadcom/bcm2710-rpi-cm3 \ - broadcom/bcm2710-rpi-zero-2 + broadcom/bcm2710-rpi-zero-2 broadcom/bcm2710-rpi-zero-2-w SUPPORTED_DEVICES := \ - rpi-3-b rpi-3-b-plus rpi-zero-2 \ + rpi-3-a-plus \ + rpi-3-b rpi-3-b-plus \ + rpi-zero-2 rpi-zero-2-w \ raspberrypi,2-model-b-rev2 \ + raspberrypi,3-model-a-plus \ raspberrypi,3-model-b raspberrypi,3-model-b-plus \ raspberrypi,3-compute-module raspberrypi,compute-module-3 \ - raspberrypi,model-zero-2 + raspberrypi,model-zero-2 raspberrypi,model-zero-2-w DEVICE_PACKAGES := \ cypress-firmware-43430-sdio \ brcmfmac-nvram-43430-sdio \