From: Kevin Darbyshire-Bryant Date: Fri, 15 Sep 2017 10:41:09 +0000 (+0100) Subject: kernel: update 4.4 to 4.4.88 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=820101873d6ac197cf5aff327f784ec3584fe1c7;p=openwrt%2Fstaging%2Fwigyori.git kernel: update 4.4 to 4.4.88 Refresh patches. Compile & run tested: ar71xx Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant --- diff --git a/include/kernel-version.mk b/include/kernel-version.mk index 25ef3d6c4f..0fd915adc2 100644 --- a/include/kernel-version.mk +++ b/include/kernel-version.mk @@ -3,11 +3,11 @@ LINUX_RELEASE?=1 LINUX_VERSION-3.18 = .43 -LINUX_VERSION-4.4 = .87 +LINUX_VERSION-4.4 = .88 LINUX_VERSION-4.9 = .49 LINUX_KERNEL_HASH-3.18.43 = 1236e8123a6ce537d5029232560966feed054ae31776fe8481dd7d18cdd5492c -LINUX_KERNEL_HASH-4.4.87 = 1ab05222c3c55e062c3f7418976137ee529f92174261ccb0cd5a7d3370ff6f5b +LINUX_KERNEL_HASH-4.4.88 = 144fe8dd773ec317fa06109b8d7bd04141bf1941daa03799fb4f437bbbb919b4 LINUX_KERNEL_HASH-4.9.49 = 57ecdcf180b56356b2e15264ca567a8fcd9eec993fc70286bec3bd0005e791fb ifdef KERNEL_PATCHVER diff --git a/target/linux/generic/pending-4.4/002-phy_drivers_backport.patch b/target/linux/generic/pending-4.4/002-phy_drivers_backport.patch index 72e13dcf8b..5d83aa3bb1 100644 --- a/target/linux/generic/pending-4.4/002-phy_drivers_backport.patch +++ b/target/linux/generic/pending-4.4/002-phy_drivers_backport.patch @@ -86,7 +86,7 @@ --- a/drivers/net/phy/ar8216.c +++ b/drivers/net/phy/ar8216.c -@@ -183,7 +183,7 @@ ar8xxx_phy_check_aneg(struct phy_device +@@ -177,7 +177,7 @@ ar8xxx_phy_check_aneg(struct phy_device if (ret & BMCR_ANENABLE) return 0; @@ -95,7 +95,7 @@ ret |= BMCR_ANENABLE | BMCR_ANRESTART; return phy_write(phydev, MII_BMCR, ret); } -@@ -2054,7 +2054,7 @@ ar8xxx_phy_config_init(struct phy_device +@@ -2007,7 +2007,7 @@ ar8xxx_phy_config_init(struct phy_device priv->phy = phydev; @@ -104,7 +104,7 @@ if (chip_is_ar8316(priv)) { /* switch device has been initialized, reinit */ priv->dev.ports = (AR8216_NUM_PORTS - 1); -@@ -2102,7 +2102,7 @@ ar8xxx_check_link_states(struct ar8xxx_p +@@ -2055,7 +2055,7 @@ ar8xxx_check_link_states(struct ar8xxx_p /* flush ARL entries for this port if it went down*/ if (!link_new) priv->chip->atu_flush_port(priv, i); @@ -113,7 +113,7 @@ i, link_new ? "up" : "down"); } -@@ -2121,10 +2121,10 @@ ar8xxx_phy_read_status(struct phy_device +@@ -2074,10 +2074,10 @@ ar8xxx_phy_read_status(struct phy_device if (phydev->state == PHY_CHANGELINK) ar8xxx_check_link_states(priv); @@ -126,7 +126,7 @@ phydev->link = !!link.link; if (!phydev->link) return 0; -@@ -2154,7 +2154,7 @@ ar8xxx_phy_read_status(struct phy_device +@@ -2107,7 +2107,7 @@ ar8xxx_phy_read_status(struct phy_device static int ar8xxx_phy_config_aneg(struct phy_device *phydev) { @@ -135,7 +135,7 @@ return 0; return genphy_config_aneg(phydev); -@@ -2209,15 +2209,15 @@ ar8xxx_phy_probe(struct phy_device *phyd +@@ -2162,15 +2162,15 @@ ar8xxx_phy_probe(struct phy_device *phyd int ret; /* skip PHYs at unused adresses */ @@ -154,7 +154,7 @@ goto found; priv = ar8xxx_create(); -@@ -2226,7 +2226,7 @@ ar8xxx_phy_probe(struct phy_device *phyd +@@ -2179,7 +2179,7 @@ ar8xxx_phy_probe(struct phy_device *phyd goto unlock; } @@ -163,7 +163,7 @@ ret = ar8xxx_probe_switch(priv); if (ret) -@@ -2247,7 +2247,7 @@ ar8xxx_phy_probe(struct phy_device *phyd +@@ -2200,7 +2200,7 @@ ar8xxx_phy_probe(struct phy_device *phyd found: priv->use_count++; @@ -172,7 +172,7 @@ if (ar8xxx_has_gige(priv)) { phydev->supported = SUPPORTED_1000baseT_Full; phydev->advertising = ADVERTISED_1000baseT_Full; -@@ -2335,21 +2335,33 @@ ar8xxx_phy_soft_reset(struct phy_device +@@ -2288,21 +2288,33 @@ ar8xxx_phy_soft_reset(struct phy_device return 0; } @@ -464,7 +464,7 @@ module_init(psb6970_init); --- a/drivers/net/phy/rtl8306.c +++ b/drivers/net/phy/rtl8306.c -@@ -872,7 +872,7 @@ rtl8306_config_init(struct phy_device *p +@@ -876,7 +876,7 @@ rtl8306_config_init(struct phy_device *p int err; /* Only init the switch for the primary PHY */ @@ -473,7 +473,7 @@ return 0; val.value.i = 1; -@@ -882,7 +882,7 @@ rtl8306_config_init(struct phy_device *p +@@ -886,7 +886,7 @@ rtl8306_config_init(struct phy_device *p priv->dev.ops = &rtl8306_ops; priv->do_cpu = 0; priv->page = -1; @@ -482,7 +482,7 @@ chipid = rtl_get(dev, RTL_REG_CHIPID); chipver = rtl_get(dev, RTL_REG_CHIPVER); -@@ -928,13 +928,13 @@ rtl8306_fixup(struct phy_device *pdev) +@@ -932,13 +932,13 @@ rtl8306_fixup(struct phy_device *pdev) u16 chipid; /* Attach to primary LAN port and WAN port */ @@ -498,7 +498,7 @@ chipid = rtl_get(&priv.dev, RTL_REG_CHIPID); if (chipid == 0x5988) pdev->phy_id = RTL8306_MAGIC; -@@ -952,14 +952,14 @@ rtl8306_probe(struct phy_device *pdev) +@@ -956,14 +956,14 @@ rtl8306_probe(struct phy_device *pdev) * share one rtl_priv instance between virtual phy * devices on the same bus */ @@ -515,7 +515,7 @@ found: pdev->priv = priv; -@@ -980,7 +980,7 @@ rtl8306_config_aneg(struct phy_device *p +@@ -984,7 +984,7 @@ rtl8306_config_aneg(struct phy_device *p struct rtl_priv *priv = pdev->priv; /* Only for WAN */ @@ -524,7 +524,7 @@ return 0; /* Restart autonegotiation */ -@@ -996,7 +996,7 @@ rtl8306_read_status(struct phy_device *p +@@ -1000,7 +1000,7 @@ rtl8306_read_status(struct phy_device *p struct rtl_priv *priv = pdev->priv; struct switch_dev *dev = &priv->dev; @@ -533,7 +533,7 @@ /* WAN */ pdev->speed = rtl_get(dev, RTL_PORT_REG(4, SPEED)) ? SPEED_100 : SPEED_10; pdev->duplex = rtl_get(dev, RTL_PORT_REG(4, DUPLEX)) ? DUPLEX_FULL : DUPLEX_HALF; -@@ -1037,6 +1037,7 @@ static struct phy_driver rtl8306_driver +@@ -1041,6 +1041,7 @@ static struct phy_driver rtl8306_driver .config_init = &rtl8306_config_init, .config_aneg = &rtl8306_config_aneg, .read_status = &rtl8306_read_status, @@ -541,7 +541,7 @@ }; -@@ -1044,7 +1045,7 @@ static int __init +@@ -1048,7 +1049,7 @@ static int __init rtl_init(void) { phy_register_fixup_for_id(PHY_ANY_ID, rtl8306_fixup); diff --git a/target/linux/generic/pending-4.4/811-pci_disable_usb_common_quirks.patch b/target/linux/generic/pending-4.4/811-pci_disable_usb_common_quirks.patch index c990681067..702c9fa2b5 100644 --- a/target/linux/generic/pending-4.4/811-pci_disable_usb_common_quirks.patch +++ b/target/linux/generic/pending-4.4/811-pci_disable_usb_common_quirks.patch @@ -10,7 +10,7 @@ static struct amd_chipset_info { struct pci_dev *nb_dev; struct pci_dev *smbus_dev; -@@ -457,6 +459,10 @@ void usb_amd_dev_put(void) +@@ -458,6 +460,10 @@ void usb_amd_dev_put(void) } EXPORT_SYMBOL_GPL(usb_amd_dev_put); @@ -21,7 +21,7 @@ /* * Make sure the controller is completely inactive, unable to * generate interrupts or do DMA. -@@ -536,8 +542,17 @@ reset_needed: +@@ -537,8 +543,17 @@ reset_needed: uhci_reset_hc(pdev, base); return 1; } @@ -39,7 +39,7 @@ static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask) { u16 cmd; -@@ -1102,3 +1117,4 @@ static void quirk_usb_early_handoff(stru +@@ -1103,3 +1118,4 @@ static void quirk_usb_early_handoff(stru } DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff);