From: John Crispin Date: Mon, 7 Oct 2013 15:02:56 +0000 (+0000) Subject: lantiq: fix fritz3370 dts file X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=81fb43d2f168c27f763c0a497fd8112e587fdfaf;p=openwrt%2Fstaging%2Fthess.git lantiq: fix fritz3370 dts file Signed-off-by: John Crispin SVN-Revision: 38327 --- diff --git a/target/linux/lantiq/dts/FRITZ3370.dts b/target/linux/lantiq/dts/FRITZ3370.dts index c7069b2d0b..f5ad2c1bcc 100644 --- a/target/linux/lantiq/dts/FRITZ3370.dts +++ b/target/linux/lantiq/dts/FRITZ3370.dts @@ -23,13 +23,8 @@ #size-cells = <1>; partition@0 { - label = "kernel"; - reg = <0x00000 0x400000>; - }; - - partition@400000 { - label = "rootfs"; - reg = <0x400000 0x3000000>; + label = "firmware"; + reg = <0x00000 0x3400000>; }; partition@3400000 { @@ -51,53 +46,6 @@ }; }; - spi@E100800 { - compatible = "lantiq,spi-xway-broken"; - reg = <0xE100800 0x100>; - interrupt-parent = <&icu0>; - interrupts = <22 23 24>; - #address-cells = <1>; - #size-cells = <1>; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "s25fl129p0"; - reg = <0 0>; - linux,modalias = "m25p80", "mx25l3205d"; - spi-max-frequency = <1000000>; - - partition@0 { - reg = <0x0 0x20000>; - label = "SPI (RO) U-Boot Image"; - read-only; - }; - - partition@20000 { - reg = <0x20000 0x10000>; - label = "ENV_MAC"; - read-only; - }; - - partition@30000 { - reg = <0x30000 0x10000>; - label = "DPF"; - read-only; - }; - - partition@40000 { - reg = <0x40000 0x10000>; - label = "NVRAM"; - read-only; - }; - - partition@500000 { - reg = <0x50000 0x003a0000>; - label = "kernel"; - }; - }; - }; - gpio: pinmux@E100B10 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -105,7 +53,7 @@ state_default: pinmux { spi { lantiq,groups = "spi", "spi_cs4"; - lantiq,function = "spi"; + lantiq,function = "gpio"; }; nand_out { lantiq,groups = "nand cle", "nand ale", "nand rd", "ebu a23", "ebu a24"; @@ -216,6 +164,53 @@ }; }; + spi { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "spi-gpio"; + + gpio-miso = <&gpio 16 0>; + gpio-mosi = <&gpio 17 0>; + gpio-sck = <&gpio 18 0>; + num-chipselects = <1>; + cs-gpios = <&gpio 10 1>; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l2005a"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l2005a"; + spi-max-frequency = <1000000>; + + ath9k_cal: partition@0 { + reg = <0x0 0x20000>; + label = "urlader"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0x10000>; + label = "tffs (1)"; + read-only; + }; + + partition@30000 { + reg = <0x30000 0x10000>; + label = "tffs (2)"; + read-only; + }; + }; + }; + + ath9k_eep { + compatible = "ath9k,eeprom-mtd"; + ath,eep-flash = <&ath9k_cal 0x985>; + ath,eep-endian; + ath,eep-swap; + }; + gphy-xrx200 { compatible = "lantiq,phy-xrx200"; firmware = "lantiq/vr9_phy11g_a1x.bin";