From: Gabor Juhos Date: Fri, 10 Feb 2012 08:19:28 +0000 (+0000) Subject: ar71xx: nuke 2.6.39 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=81b7aaefbe060d752ed49d41aef11f2184f699ce;p=openwrt%2Fstaging%2Faparcar.git ar71xx: nuke 2.6.39 support SVN-Revision: 30404 --- diff --git a/target/linux/ar71xx/config-2.6.39 b/target/linux/ar71xx/config-2.6.39 deleted file mode 100644 index dd422b1078..0000000000 --- a/target/linux/ar71xx/config-2.6.39 +++ /dev/null @@ -1,222 +0,0 @@ -CONFIG_AG71XX=y -CONFIG_AG71XX_AR8216_SUPPORT=y -# CONFIG_AG71XX_DEBUG is not set -# CONFIG_AG71XX_DEBUG_FS is not set -CONFIG_AR71XX_DEV_AP91_PCI=y -CONFIG_AR71XX_DEV_AP94_PCI=y -CONFIG_AR71XX_DEV_AR9XXX_WMAC=y -CONFIG_AR71XX_DEV_DB120_PCI=y -CONFIG_AR71XX_DEV_DSA=y -CONFIG_AR71XX_DEV_GPIO_BUTTONS=y -CONFIG_AR71XX_DEV_LEDS_GPIO=y -CONFIG_AR71XX_DEV_M25P80=y -CONFIG_AR71XX_DEV_PB42_PCI=y -CONFIG_AR71XX_DEV_PB9X_PCI=y -CONFIG_AR71XX_DEV_USB=y -CONFIG_AR71XX_MACH_ALFA_AP96=y -CONFIG_AR71XX_MACH_ALFA_NX=y -CONFIG_AR71XX_MACH_ALL0258N=y -CONFIG_AR71XX_MACH_AP113=y -CONFIG_AR71XX_MACH_AP121=y -CONFIG_AR71XX_MACH_AP81=y -CONFIG_AR71XX_MACH_AP83=y -CONFIG_AR71XX_MACH_AP96=y -CONFIG_AR71XX_MACH_AW_NR580=y -CONFIG_AR71XX_MACH_DB120=y -CONFIG_AR71XX_MACH_DIR_600_A1=y -CONFIG_AR71XX_MACH_DIR_615_C1=y -CONFIG_AR71XX_MACH_DIR_825_B1=y -CONFIG_AR71XX_MACH_EAP7660D=y -CONFIG_AR71XX_MACH_HORNET_UB=y -CONFIG_AR71XX_MACH_JA76PF=y -CONFIG_AR71XX_MACH_JWAP003=y -CONFIG_AR71XX_MACH_MZK_W04NU=y -CONFIG_AR71XX_MACH_MZK_W300NH=y -CONFIG_AR71XX_MACH_NBG460N=y -CONFIG_AR71XX_MACH_OM2P=y -CONFIG_AR71XX_MACH_PB42=y -CONFIG_AR71XX_MACH_PB44=y -CONFIG_AR71XX_MACH_PB92=y -CONFIG_AR71XX_MACH_RB4XX=y -CONFIG_AR71XX_MACH_RB750=y -CONFIG_AR71XX_MACH_RW2458N=y -CONFIG_AR71XX_MACH_TEW_632BRP=y -CONFIG_AR71XX_MACH_TEW_673GRU=y -CONFIG_AR71XX_MACH_TL_MR11U=y -CONFIG_AR71XX_MACH_TL_MR3020=y -CONFIG_AR71XX_MACH_TL_MR3X20=y -CONFIG_AR71XX_MACH_TL_WA901ND=y -CONFIG_AR71XX_MACH_TL_WA901ND_V2=y -CONFIG_AR71XX_MACH_TL_WR1043ND=y -CONFIG_AR71XX_MACH_TL_WR2543N=y -CONFIG_AR71XX_MACH_TL_WR703N=y -CONFIG_AR71XX_MACH_TL_WR741ND=y -CONFIG_AR71XX_MACH_TL_WR741ND_V4=y -CONFIG_AR71XX_MACH_TL_WR841N_V1=y -CONFIG_AR71XX_MACH_TL_WR941ND=y -CONFIG_AR71XX_MACH_UBNT=y -CONFIG_AR71XX_MACH_WHR_HP_G300N=y -CONFIG_AR71XX_MACH_WNDR3700=y -CONFIG_AR71XX_MACH_WNR2000=y -CONFIG_AR71XX_MACH_WP543=y -CONFIG_AR71XX_MACH_WPE72=y -CONFIG_AR71XX_MACH_WRT160NL=y -CONFIG_AR71XX_MACH_WRT400N=y -CONFIG_AR71XX_MACH_WZR_HP_AG300H=y -CONFIG_AR71XX_MACH_WZR_HP_G300NH=y -CONFIG_AR71XX_MACH_WZR_HP_G300NH2=y -CONFIG_AR71XX_MACH_WZR_HP_G450H=y -CONFIG_AR71XX_MACH_ZCN_1523H=y -CONFIG_AR71XX_NVRAM=y -CONFIG_AR71XX_PCI_ATH9K_FIXUP=y -CONFIG_AR71XX_WDT=y -CONFIG_AR8216_PHY=y -# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_ATH79 is not set -CONFIG_ATHEROS_AR71XX=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_R4K_LIB=y -CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CSRC_R4K=y -CONFIG_CSRC_R4K_LIB=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_NXP_74HC153=y -CONFIG_GPIO_PCF857X=y -CONFIG_GPIO_SYSFS=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_GENERIC_HARDIRQS=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_WORK=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HW_HAS_PCI=y -CONFIG_I2C=y -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_GPIO=y -# CONFIG_I2C_PXA_PCI is not set -CONFIG_IMAGE_CMDLINE_HACK=y -CONFIG_INITRAMFS_ROOT_GID=0 -CONFIG_INITRAMFS_ROOT_UID=0 -CONFIG_INITRAMFS_SOURCE="../../root" -CONFIG_IP17XX_PHY=y -CONFIG_IRQ_CPU=y -# CONFIG_LEDS_GPIO is not set -# CONFIG_LEDS_RB750 is not set -# CONFIG_LEDS_WNDR3700_USB is not set -# CONFIG_M25PXX_USE_FAST_READ is not set -CONFIG_MACH_NO_WESTBRIDGE=y -CONFIG_MARVELL_PHY=y -CONFIG_MICREL_PHY=y -# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set -CONFIG_MIPS=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_MACHINE=y -CONFIG_MIPS_MT_DISABLED=y -CONFIG_MTD_AR91XX_FLASH=y -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_MYLOADER_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2 -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_TPLINK_PARTS=y -CONFIG_MTD_WRT160NL_PARTS=y -CONFIG_MYLOADER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_MV88E6060=y -CONFIG_NET_DSA_MV88E6063=y -CONFIG_NET_DSA_TAG_TRAILER=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PCI=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -# CONFIG_PREEMPT_RCU is not set -# CONFIG_QUOTACTL is not set -CONFIG_RTL8306_PHY=y -CONFIG_RTL8366RB_PHY=y -CONFIG_RTL8366S_PHY=y -CONFIG_RTL8366_SMI=y -CONFIG_RTL8367_PHY=y -# CONFIG_SCSI_DMA is not set -CONFIG_SERIAL_8250_NR_UARTS=1 -CONFIG_SERIAL_8250_RUNTIME_UARTS=1 -CONFIG_SERIAL_AR933X=y -CONFIG_SERIAL_AR933X_CONSOLE=y -CONFIG_SERIAL_AR933X_NR_UARTS=2 -# CONFIG_SLAB is not set -CONFIG_SLUB=y -CONFIG_SOC_AR71XX=y -CONFIG_SOC_AR724X=y -CONFIG_SOC_AR913X=y -CONFIG_SOC_AR933X=y -CONFIG_SOC_AR934X=y -CONFIG_SPI=y -CONFIG_SPI_AP83=y -CONFIG_SPI_AR71XX=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_PB44=y -CONFIG_SWCONFIG=y -CONFIG_SWCONFIG_LEDS=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_USB_SUPPORT=y -CONFIG_XZ_DEC=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig deleted file mode 100644 index f40c8d992f..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig +++ /dev/null @@ -1,529 +0,0 @@ -if ATHEROS_AR71XX - -menu "Atheros AR71xx machine selection" -config AR71XX_MACH_ALFA_AP96 - bool "ALFA Network AP96 board support" - select SOC_AR71XX - select AR71XX_DEV_PB42_PCI if PCI - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_USB - -config AR71XX_MACH_HORNET_UB - bool "Alfa Networks Hornet-UB board support" - select SOC_AR933X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - select AR71XX_DEV_AR9XXX_WMAC - -config AR71XX_MACH_ALFA_NX - bool "ALFA Network N2/N5 board support" - select SOC_AR724X - select AR71XX_DEV_AP91_PCI if PCI - select AR71XX_DEV_M25P80 - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - -config AR71XX_MACH_ALL0258N - bool "Allnet ALL0258N support" - select SOC_AR724X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AP91_PCI if PCI - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - -config AR71XX_MACH_AP81 - bool "Atheros AP81 board support" - select SOC_AR913X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AR9XXX_WMAC - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_AP83 - bool "Atheros AP83 board support" - select SOC_AR913X - select AR71XX_DEV_AR9XXX_WMAC - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_AP96 - bool "Atheros AP96 board support" - select SOC_AR71XX - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AP94_PCI if PCI - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_AP113 - bool "Atheros AP113 board support" - select SOC_AR724X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_PB9X_PCI if PCI - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_AP121 - bool "Atheros AP121 board support" - select AR71XX_DEV_M25P80 - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - select AR71XX_DEV_AR9XXX_WMAC - select SOC_AR933X - -config AR71XX_MACH_DB120 - bool "Atheros DB120 board support" - select SOC_AR934X - select AR71XX_DEV_AR9XXX_WMAC - select AR71XX_DEV_DB120_PCI if PCI - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_DIR_600_A1 - bool "D-Link DIR-600 A1/DIR-615 E4 support" - select SOC_AR724X - select AR71XX_DEV_AP91_PCI if PCI - select AR71XX_DEV_M25P80 - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_NVRAM - -config AR71XX_MACH_DIR_615_C1 - bool "D-Link DIR-615 rev. C1 support" - select SOC_AR913X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AR9XXX_WMAC - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_NVRAM - -config AR71XX_MACH_DIR_825_B1 - bool "D-Link DIR-825 rev. B1 board support" - select SOC_AR71XX - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AP94_PCI if PCI - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_JA76PF - bool "jjPlus JA76PF board support" - select SOC_AR71XX - select AR71XX_DEV_M25P80 - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_PB42_PCI if PCI - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_JWAP003 - bool "jjPlus JWAP003 board support" - select SOC_AR71XX - select AR71XX_DEV_M25P80 - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_PB42_PCI if PCI - select AR71XX_DEV_USB - -config AR71XX_MACH_PB42 - bool "Atheros PB42 board support" - select SOC_AR71XX - select AR71XX_DEV_M25P80 - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_PB42_PCI if PCI - -config AR71XX_MACH_PB44 - bool "Atheros PB44 board support" - select SOC_AR71XX - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_PB42_PCI if PCI - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_PB92 - bool "Atheros PB92 board support" - select SOC_AR724X - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_PB9X_PCI if PCI - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_RW2458N - bool "Redwave RW2458N board support" - select SOC_AR724X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AP91_PCI if PCI - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_AW_NR580 - bool "AzureWave AW-NR580 board support" - select SOC_AR71XX - select AR71XX_DEV_M25P80 - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_PB42_PCI if PCI - select AR71XX_DEV_LEDS_GPIO - -config AR71XX_MACH_WZR_HP_AG300H - bool "Buffalo WZR-HP-AG300H board support" - select SOC_AR71XX - select AR71XX_DEV_M25P80 - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_WZR_HP_G450H - bool "Buffalo WZR-HP-G450H board support" - select SOC_AR724X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AP91_PCI if PCI - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_WZR_HP_G300NH - bool "Buffalo WZR-HP-G300NH board support" - select SOC_AR913X - select AR71XX_DEV_AR9XXX_WMAC - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - select RTL8366_SMI - -config AR71XX_MACH_WZR_HP_G300NH2 - bool "Buffalo WZR-HP-G300NH2 board support" - select SOC_AR724X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_AP91_PCI if PCI - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_WHR_HP_G300N - bool "Buffalo WHR-HP-G300N board support" - select SOC_AR724X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AP91_PCI if PCI - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - -config AR71XX_MACH_WP543 - bool "Compex WP543/WPJ543 board support" - select SOC_AR71XX - select MYLOADER - select AR71XX_DEV_M25P80 - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_PB42_PCI if PCI - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_WPE72 - bool "Compex WPE72 board support" - select SOC_AR724X - select MYLOADER - select AR71XX_DEV_M25P80 - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_PB42_PCI if PCI - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_WRT160NL - bool "Linksys WRT160NL board support" - select SOC_AR913X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AR9XXX_WMAC - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - select AR71XX_NVRAM - -config AR71XX_MACH_WRT400N - bool "Linksys WRT400N board support" - select SOC_AR71XX - select AR71XX_DEV_AP94_PCI if PCI - select AR71XX_DEV_M25P80 - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - -config AR71XX_MACH_RB4XX - bool "MikroTik RouterBOARD 4xx series support" - select SOC_AR71XX - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_RB750 - bool "MikroTik RouterBOARD 750 support" - select SOC_AR724X - -config AR71XX_MACH_WNDR3700 - bool "NETGEAR WNDR3700 board support" - select SOC_AR71XX - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AP94_PCI if PCI - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_WNR2000 - bool "NETGEAR WNR2000 board support" - select SOC_AR913X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AR9XXX_WMAC - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - -config AR71XX_MACH_OM2P - bool "OpenMesh OM2P board support" - select SOC_AR724X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AP91_PCI if PCI - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - -config AR71XX_MACH_MZK_W04NU - bool "Planex MZK-W04NU board support" - select SOC_AR913X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AR9XXX_WMAC - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_MZK_W300NH - bool "Planex MZK-W300NH board support" - select SOC_AR913X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AR9XXX_WMAC - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - -config AR71XX_MACH_NBG460N - bool "Zyxel NBG460N/550N/550NH board support" - select SOC_AR913X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AR9XXX_WMAC - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - -config AR71XX_MACH_TL_MR11U - bool "TP-LINK TL-MR11U support" - select SOC_AR933X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - select AR71XX_DEV_AR9XXX_WMAC - -config AR71XX_MACH_TL_MR3020 - bool "TP-LINK TL-MR3020 support" - select SOC_AR933X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - select AR71XX_DEV_AR9XXX_WMAC - -config AR71XX_MACH_TL_MR3X20 - bool "TP-LINK TL-MR3220/3420 support" - select SOC_AR724X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AP91_PCI if PCI - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_TL_WA901ND - bool "TP-LINK TL-WA901ND support" - select SOC_AR724X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AP91_PCI if PCI - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - -config AR71XX_MACH_TL_WA901ND_V2 - bool "TP-LINK TL-WA901ND v2 support" - select SOC_AR913X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AR9XXX_WMAC - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - -config AR71XX_MACH_TL_WR703N - bool "TP-LINK TL-WR703N support" - select SOC_AR933X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - select AR71XX_DEV_AR9XXX_WMAC - -config AR71XX_MACH_TL_WR741ND - bool "TP-LINK TL-WR741ND support" - select SOC_AR724X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AP91_PCI if PCI - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - -config AR71XX_MACH_TL_WR741ND_V4 - bool "TP-LINK TL-WR741ND v4 support" - select SOC_AR933X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_AR9XXX_WMAC - -config AR71XX_MACH_TL_WR841N_V1 - bool "TP-LINK TL-WR841N v1 support" - select SOC_AR71XX - select AR71XX_DEV_M25P80 - select AR71XX_DEV_PB42_PCI if PCI - select AR71XX_DEV_DSA - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - -config AR71XX_MACH_TL_WR941ND - bool "TP-LINK TL-WR941ND support" - select SOC_AR913X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AR9XXX_WMAC - select AR71XX_DEV_DSA - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - -config AR71XX_MACH_TL_WR1043ND - bool "TP-LINK TL-WR1043ND support" - select SOC_AR913X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AR9XXX_WMAC - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_TL_WR2543N - bool "TP-LINK TL-WR2543N/ND support" - select SOC_AR724X - select AR71XX_DEV_AP91_PCI if PCI - select AR71XX_DEV_M25P80 - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_TEW_632BRP - bool "TRENDnet TEW-632BRP support" - select SOC_AR913X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AR9XXX_WMAC - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_NVRAM - -config AR71XX_MACH_TEW_673GRU - bool "TRENDnet TEW-673GRU support" - select SOC_AR71XX - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AP94_PCI if PCI - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_USB - -config AR71XX_MACH_UBNT - bool "Ubiquiti AR71xx based boards support" - select SOC_AR71XX - select SOC_AR724X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AP91_PCI if PCI - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - select AR71XX_DEV_PB42_PCI if PCI - select AR71XX_DEV_USB - -config AR71XX_MACH_EAP7660D - bool "Senao EAP7660D support" - select SOC_AR71XX - select AR71XX_DEV_M25P80 - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - -config AR71XX_MACH_ZCN_1523H - bool "Zcomax ZCN-1523H support" - select SOC_AR724X - select AR71XX_DEV_M25P80 - select AR71XX_DEV_AP91_PCI if PCI - select AR71XX_DEV_GPIO_BUTTONS - select AR71XX_DEV_LEDS_GPIO - -endmenu - -config SOC_AR71XX - bool - select USB_ARCH_HAS_EHCI - select USB_ARCH_HAS_OHCI - -config SOC_AR724X - bool - select USB_ARCH_HAS_EHCI - select USB_ARCH_HAS_OHCI - -config SOC_AR913X - bool - select USB_ARCH_HAS_EHCI - -config SOC_AR934X - bool - select USB_ARCH_HAS_EHCI - -config AR71XX_DEV_M25P80 - def_bool n - -config AR71XX_DEV_AP91_PCI - select AR71XX_PCI_ATH9K_FIXUP - def_bool n - -config AR71XX_DEV_AP94_PCI - select AR71XX_PCI_ATH9K_FIXUP - def_bool n - -config AR71XX_DEV_AR9XXX_WMAC - def_bool n - -config AR71XX_DEV_DB120_PCI - select AR71XX_PCI_ATH9K_FIXUP - def_bool n - -config AR71XX_DEV_DSA - def_bool n - -config AR71XX_DEV_GPIO_BUTTONS - def_bool n - -config AR71XX_DEV_LEDS_GPIO - def_bool n - -config AR71XX_DEV_PB42_PCI - def_bool n - -config AR71XX_DEV_PB9X_PCI - def_bool n - -config AR71XX_DEV_USB - def_bool n - -config AR71XX_NVRAM - def_bool n - -config AR71XX_PCI_ATH9K_FIXUP - def_bool n - -config SOC_AR933X - bool - select USB_ARCH_HAS_EHCI - -endif diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile deleted file mode 100644 index 23c95cad57..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile +++ /dev/null @@ -1,84 +0,0 @@ -# -# Makefile for the Atheros AR71xx SoC specific parts of the kernel -# -# Copyright (C) 2008-2009 Gabor Juhos -# Copyright (C) 2008 Imre Kaloz -# -# This program is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License version 2 as published -# by the Free Software Foundation. - -obj-y := prom.o irq.o setup.o devices.o gpio.o ar71xx.o - -obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_PCI) += pci.o - -obj-$(CONFIG_AR71XX_DEV_AP91_PCI) += dev-ap91-pci.o -obj-$(CONFIG_AR71XX_DEV_AP94_PCI) += dev-ap94-pci.o -obj-$(CONFIG_AR71XX_DEV_AR9XXX_WMAC) += dev-ar9xxx-wmac.o -obj-$(CONFIG_AR71XX_DEV_DB120_PCI) += dev-db120-pci.o -obj-$(CONFIG_AR71XX_DEV_DSA) += dev-dsa.o -obj-$(CONFIG_AR71XX_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o -obj-$(CONFIG_AR71XX_DEV_LEDS_GPIO) += dev-leds-gpio.o -obj-$(CONFIG_AR71XX_DEV_M25P80) += dev-m25p80.o -obj-$(CONFIG_AR71XX_DEV_PB42_PCI) += dev-pb42-pci.o -obj-$(CONFIG_AR71XX_DEV_PB9X_PCI) += dev-pb9x-pci.o -obj-$(CONFIG_AR71XX_DEV_USB) += dev-usb.o - -obj-$(CONFIG_AR71XX_NVRAM) += nvram.o -obj-$(CONFIG_AR71XX_PCI_ATH9K_FIXUP) += pci-ath9k-fixup.o - -obj-$(CONFIG_AR71XX_MACH_ALFA_AP96) += mach-alfa-ap96.o -obj-$(CONFIG_AR71XX_MACH_ALFA_NX) += mach-alfa-nx.o -obj-$(CONFIG_AR71XX_MACH_ALL0258N) += mach-all0258n.o -obj-$(CONFIG_AR71XX_MACH_AP113) += mach-ap113.o -obj-$(CONFIG_AR71XX_MACH_AP121) += mach-ap121.o -obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o -obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o -obj-$(CONFIG_AR71XX_MACH_AP96) += mach-ap96.o -obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o -obj-$(CONFIG_AR71XX_MACH_DB120) += mach-db120.o -obj-$(CONFIG_AR71XX_MACH_DIR_600_A1) += mach-dir-600-a1.o -obj-$(CONFIG_AR71XX_MACH_DIR_615_C1) += mach-dir-615-c1.o -obj-$(CONFIG_AR71XX_MACH_DIR_825_B1) += mach-dir-825-b1.o -obj-$(CONFIG_AR71XX_MACH_EAP7660D) += mach-eap7660d.o -obj-$(CONFIG_AR71XX_MACH_JA76PF) += mach-ja76pf.o -obj-$(CONFIG_AR71XX_MACH_JWAP003) += mach-jwap003.o -obj-$(CONFIG_AR71XX_MACH_HORNET_UB) += mach-hornet-ub.o -obj-$(CONFIG_AR71XX_MACH_MZK_W04NU) += mach-mzk-w04nu.o -obj-$(CONFIG_AR71XX_MACH_MZK_W300NH) += mach-mzk-w300nh.o -obj-$(CONFIG_AR71XX_MACH_NBG460N) += mach-nbg460n.o -obj-$(CONFIG_AR71XX_MACH_OM2P) += mach-om2p.o -obj-$(CONFIG_AR71XX_MACH_PB42) += mach-pb42.o -obj-$(CONFIG_AR71XX_MACH_PB44) += mach-pb44.o -obj-$(CONFIG_AR71XX_MACH_PB92) += mach-pb92.o -obj-$(CONFIG_AR71XX_MACH_RB4XX) += mach-rb4xx.o -obj-$(CONFIG_AR71XX_MACH_RB750) += mach-rb750.o -obj-$(CONFIG_AR71XX_MACH_RW2458N) += mach-rw2458n.o -obj-$(CONFIG_AR71XX_MACH_TEW_632BRP) += mach-tew-632brp.o -obj-$(CONFIG_AR71XX_MACH_TEW_673GRU) += mach-tew-673gru.o -obj-$(CONFIG_AR71XX_MACH_TL_MR11U) += mach-tl-mr11u.o -obj-$(CONFIG_AR71XX_MACH_TL_MR3020) += mach-tl-mr3020.o -obj-$(CONFIG_AR71XX_MACH_TL_MR3X20) += mach-tl-mr3x20.o -obj-$(CONFIG_AR71XX_MACH_TL_WA901ND) += mach-tl-wa901nd.o -obj-$(CONFIG_AR71XX_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o -obj-$(CONFIG_AR71XX_MACH_TL_WR741ND) += mach-tl-wr741nd.o -obj-$(CONFIG_AR71XX_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o -obj-$(CONFIG_AR71XX_MACH_TL_WR841N_V1) += mach-tl-wr841n.o -obj-$(CONFIG_AR71XX_MACH_TL_WR941ND) += mach-tl-wr941nd.o -obj-$(CONFIG_AR71XX_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o -obj-$(CONFIG_AR71XX_MACH_TL_WR2543N) += mach-tl-wr2543n.o -obj-$(CONFIG_AR71XX_MACH_TL_WR703N) += mach-tl-wr703n.o -obj-$(CONFIG_AR71XX_MACH_UBNT) += mach-ubnt.o -obj-$(CONFIG_AR71XX_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o -obj-$(CONFIG_AR71XX_MACH_WNDR3700) += mach-wndr3700.o -obj-$(CONFIG_AR71XX_MACH_WNR2000) += mach-wnr2000.o -obj-$(CONFIG_AR71XX_MACH_WP543) += mach-wp543.o -obj-$(CONFIG_AR71XX_MACH_WPE72) += mach-wpe72.o -obj-$(CONFIG_AR71XX_MACH_WRT160NL) += mach-wrt160nl.o -obj-$(CONFIG_AR71XX_MACH_WRT400N) += mach-wrt400n.o -obj-$(CONFIG_AR71XX_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o -obj-$(CONFIG_AR71XX_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o -obj-$(CONFIG_AR71XX_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o -obj-$(CONFIG_AR71XX_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o -obj-$(CONFIG_AR71XX_MACH_ZCN_1523H) += mach-zcn-1523h.o diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/ar71xx.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/ar71xx.c deleted file mode 100644 index 93cbe5331f..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/ar71xx.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * AR71xx SoC routines - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include - -#include - -static DEFINE_MUTEX(ar71xx_flash_mutex); -static DEFINE_SPINLOCK(ar71xx_device_lock); - -void __iomem *ar71xx_ddr_base; -EXPORT_SYMBOL_GPL(ar71xx_ddr_base); - -void __iomem *ar71xx_pll_base; -EXPORT_SYMBOL_GPL(ar71xx_pll_base); - -void __iomem *ar71xx_reset_base; -EXPORT_SYMBOL_GPL(ar71xx_reset_base); - -void __iomem *ar71xx_gpio_base; -EXPORT_SYMBOL_GPL(ar71xx_gpio_base); - -void __iomem *ar71xx_usb_ctrl_base; -EXPORT_SYMBOL_GPL(ar71xx_usb_ctrl_base); - -void ar71xx_device_stop(u32 mask) -{ - unsigned long flags; - u32 mask_inv; - u32 t; - - switch (ar71xx_soc) { - case AR71XX_SOC_AR7130: - case AR71XX_SOC_AR7141: - case AR71XX_SOC_AR7161: - spin_lock_irqsave(&ar71xx_device_lock, flags); - t = ar71xx_reset_rr(AR71XX_RESET_REG_RESET_MODULE); - ar71xx_reset_wr(AR71XX_RESET_REG_RESET_MODULE, t | mask); - spin_unlock_irqrestore(&ar71xx_device_lock, flags); - break; - - case AR71XX_SOC_AR7240: - case AR71XX_SOC_AR7241: - case AR71XX_SOC_AR7242: - mask_inv = mask & RESET_MODULE_USB_OHCI_DLL_7240; - spin_lock_irqsave(&ar71xx_device_lock, flags); - t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE); - t |= mask; - t &= ~mask_inv; - ar71xx_reset_wr(AR724X_RESET_REG_RESET_MODULE, t); - spin_unlock_irqrestore(&ar71xx_device_lock, flags); - break; - - case AR71XX_SOC_AR9130: - case AR71XX_SOC_AR9132: - spin_lock_irqsave(&ar71xx_device_lock, flags); - t = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE); - ar71xx_reset_wr(AR91XX_RESET_REG_RESET_MODULE, t | mask); - spin_unlock_irqrestore(&ar71xx_device_lock, flags); - break; - - case AR71XX_SOC_AR9330: - case AR71XX_SOC_AR9331: - spin_lock_irqsave(&ar71xx_device_lock, flags); - t = ar71xx_reset_rr(AR933X_RESET_REG_RESET_MODULE); - ar71xx_reset_wr(AR933X_RESET_REG_RESET_MODULE, t | mask); - spin_unlock_irqrestore(&ar71xx_device_lock, flags); - break; - - case AR71XX_SOC_AR9341: - case AR71XX_SOC_AR9342: - case AR71XX_SOC_AR9344: - spin_lock_irqsave(&ar71xx_device_lock, flags); - t = ar71xx_reset_rr(AR934X_RESET_REG_RESET_MODULE); - ar71xx_reset_wr(AR934X_RESET_REG_RESET_MODULE, t | mask); - spin_unlock_irqrestore(&ar71xx_device_lock, flags); - break; - - default: - BUG(); - } -} -EXPORT_SYMBOL_GPL(ar71xx_device_stop); - -void ar71xx_device_start(u32 mask) -{ - unsigned long flags; - u32 mask_inv; - u32 t; - - switch (ar71xx_soc) { - case AR71XX_SOC_AR7130: - case AR71XX_SOC_AR7141: - case AR71XX_SOC_AR7161: - spin_lock_irqsave(&ar71xx_device_lock, flags); - t = ar71xx_reset_rr(AR71XX_RESET_REG_RESET_MODULE); - ar71xx_reset_wr(AR71XX_RESET_REG_RESET_MODULE, t & ~mask); - spin_unlock_irqrestore(&ar71xx_device_lock, flags); - break; - - case AR71XX_SOC_AR7240: - case AR71XX_SOC_AR7241: - case AR71XX_SOC_AR7242: - mask_inv = mask & RESET_MODULE_USB_OHCI_DLL_7240; - spin_lock_irqsave(&ar71xx_device_lock, flags); - t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE); - t &= ~mask; - t |= mask_inv; - ar71xx_reset_wr(AR724X_RESET_REG_RESET_MODULE, t); - spin_unlock_irqrestore(&ar71xx_device_lock, flags); - break; - - case AR71XX_SOC_AR9130: - case AR71XX_SOC_AR9132: - spin_lock_irqsave(&ar71xx_device_lock, flags); - t = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE); - ar71xx_reset_wr(AR91XX_RESET_REG_RESET_MODULE, t & ~mask); - spin_unlock_irqrestore(&ar71xx_device_lock, flags); - break; - - case AR71XX_SOC_AR9330: - case AR71XX_SOC_AR9331: - spin_lock_irqsave(&ar71xx_device_lock, flags); - t = ar71xx_reset_rr(AR933X_RESET_REG_RESET_MODULE); - ar71xx_reset_wr(AR933X_RESET_REG_RESET_MODULE, t & ~mask); - spin_unlock_irqrestore(&ar71xx_device_lock, flags); - break; - - case AR71XX_SOC_AR9341: - case AR71XX_SOC_AR9342: - case AR71XX_SOC_AR9344: - spin_lock_irqsave(&ar71xx_device_lock, flags); - t = ar71xx_reset_rr(AR934X_RESET_REG_RESET_MODULE); - ar71xx_reset_wr(AR934X_RESET_REG_RESET_MODULE, t & ~mask); - spin_unlock_irqrestore(&ar71xx_device_lock, flags); - break; - - default: - BUG(); - } -} -EXPORT_SYMBOL_GPL(ar71xx_device_start); - -void ar71xx_device_reset_rmw(u32 clear, u32 set) -{ - unsigned long flags; - unsigned int reg; - u32 t; - - switch (ar71xx_soc) { - case AR71XX_SOC_AR7130: - case AR71XX_SOC_AR7141: - case AR71XX_SOC_AR7161: - reg = AR71XX_RESET_REG_RESET_MODULE; - break; - - case AR71XX_SOC_AR7240: - case AR71XX_SOC_AR7241: - case AR71XX_SOC_AR7242: - reg = AR724X_RESET_REG_RESET_MODULE; - break; - - case AR71XX_SOC_AR9130: - case AR71XX_SOC_AR9132: - reg = AR91XX_RESET_REG_RESET_MODULE; - break; - - case AR71XX_SOC_AR9330: - case AR71XX_SOC_AR9331: - reg = AR933X_RESET_REG_RESET_MODULE; - break; - - case AR71XX_SOC_AR9341: - case AR71XX_SOC_AR9342: - case AR71XX_SOC_AR9344: - reg = AR934X_RESET_REG_RESET_MODULE; - break; - - default: - BUG(); - } - - spin_lock_irqsave(&ar71xx_device_lock, flags); - t = ar71xx_reset_rr(reg); - t &= ~clear; - t |= set; - ar71xx_reset_wr(reg, t); - spin_unlock_irqrestore(&ar71xx_device_lock, flags); -} -EXPORT_SYMBOL_GPL(ar71xx_device_reset_rmw); - -int ar71xx_device_stopped(u32 mask) -{ - unsigned long flags; - u32 t; - - switch (ar71xx_soc) { - case AR71XX_SOC_AR7130: - case AR71XX_SOC_AR7141: - case AR71XX_SOC_AR7161: - spin_lock_irqsave(&ar71xx_device_lock, flags); - t = ar71xx_reset_rr(AR71XX_RESET_REG_RESET_MODULE); - spin_unlock_irqrestore(&ar71xx_device_lock, flags); - break; - - case AR71XX_SOC_AR7240: - case AR71XX_SOC_AR7241: - case AR71XX_SOC_AR7242: - spin_lock_irqsave(&ar71xx_device_lock, flags); - t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE); - spin_unlock_irqrestore(&ar71xx_device_lock, flags); - break; - - case AR71XX_SOC_AR9130: - case AR71XX_SOC_AR9132: - spin_lock_irqsave(&ar71xx_device_lock, flags); - t = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE); - spin_unlock_irqrestore(&ar71xx_device_lock, flags); - break; - - case AR71XX_SOC_AR9330: - case AR71XX_SOC_AR9331: - spin_lock_irqsave(&ar71xx_device_lock, flags); - t = ar71xx_reset_rr(AR933X_RESET_REG_RESET_MODULE); - spin_unlock_irqrestore(&ar71xx_device_lock, flags); - break; - - case AR71XX_SOC_AR9341: - case AR71XX_SOC_AR9342: - case AR71XX_SOC_AR9344: - spin_lock_irqsave(&ar71xx_device_lock, flags); - t = ar71xx_reset_rr(AR934X_RESET_REG_RESET_MODULE); - spin_unlock_irqrestore(&ar71xx_device_lock, flags); - break; - - default: - BUG(); - } - - return ((t & mask) == mask); -} -EXPORT_SYMBOL_GPL(ar71xx_device_stopped); - -void ar71xx_ddr_flush(u32 reg) -{ - ar71xx_ddr_wr(reg, 1); - while ((ar71xx_ddr_rr(reg) & 0x1)) - ; - - ar71xx_ddr_wr(reg, 1); - while ((ar71xx_ddr_rr(reg) & 0x1)) - ; -} -EXPORT_SYMBOL_GPL(ar71xx_ddr_flush); - -void ar71xx_flash_acquire(void) -{ - mutex_lock(&ar71xx_flash_mutex); -} -EXPORT_SYMBOL_GPL(ar71xx_flash_acquire); - -void ar71xx_flash_release(void) -{ - mutex_unlock(&ar71xx_flash_mutex); -} -EXPORT_SYMBOL_GPL(ar71xx_flash_release); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap91-pci.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap91-pci.c deleted file mode 100644 index 7cd8c6594e..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap91-pci.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Atheros AP91 reference board PCI initialization - * - * Copyright (C) 2009 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include - -#include -#include - -#include "dev-ap91-pci.h" -#include "pci-ath9k-fixup.h" - -static struct ath9k_platform_data ap91_wmac_data = { - .led_pin = -1, -}; -static char ap91_wmac_mac[6]; - -static struct ar71xx_pci_irq ap91_pci_irqs[] __initdata = { - { - .slot = 0, - .pin = 1, - .irq = AR71XX_PCI_IRQ_DEV0, - } -}; - -static int ap91_pci_plat_dev_init(struct pci_dev *dev) -{ - switch (PCI_SLOT(dev->devfn)) { - case 0: - dev->dev.platform_data = &ap91_wmac_data; - break; - } - - return 0; -} - -__init void ap91_pci_setup_wmac_leds(struct gpio_led *leds, int num_leds) -{ - ap91_wmac_data.leds = leds; - ap91_wmac_data.num_leds = num_leds; -} - -__init void ap91_pci_setup_wmac_led_pin(int pin) -{ - ap91_wmac_data.led_pin = pin; -} - -__init void ap91_pci_setup_wmac_gpio(u32 mask, u32 val) -{ - ap91_wmac_data.gpio_mask = mask; - ap91_wmac_data.gpio_val = val; -} - -void __init ap91_pci_init(u8 *cal_data, u8 *mac_addr) -{ - if (cal_data) - memcpy(ap91_wmac_data.eeprom_data, cal_data, - sizeof(ap91_wmac_data.eeprom_data)); - - if (mac_addr) { - memcpy(ap91_wmac_mac, mac_addr, sizeof(ap91_wmac_mac)); - ap91_wmac_data.macaddr = ap91_wmac_mac; - } - - ar71xx_pci_plat_dev_init = ap91_pci_plat_dev_init; - ar71xx_pci_init(ARRAY_SIZE(ap91_pci_irqs), ap91_pci_irqs); - - pci_enable_ath9k_fixup(0, ap91_wmac_data.eeprom_data); -} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap91-pci.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap91-pci.h deleted file mode 100644 index ebcbc47299..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap91-pci.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Atheros AP91 reference board PCI initialization - * - * Copyright (C) 2009 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _AR71XX_DEV_AP91_PCI_H -#define _AR71XX_DEV_AP91_PCI_H - -#include - -#if defined(CONFIG_AR71XX_DEV_AP91_PCI) -void ap91_pci_init(u8 *cal_data, u8 *mac_addr) __init; -void ap91_pci_setup_wmac_led_pin(int pin) __init; -void ap91_pci_setup_wmac_gpio(u32 mask, u32 val) __init; -void ap91_pci_setup_wmac_leds(struct gpio_led *leds, int num_leds) __init; -#else -static inline void ap91_pci_init(u8 *cal_data, u8 *mac_addr) { } -static inline void ap91_pci_setup_wmac_led_pin(int pin) { } -static inline void ap91_pci_setup_wmac_gpio(u32 mask, u32 gpio) { } -static inline void ap91_pci_setup_wmac_leds(struct gpio_led *leds, int num_leds) { }; -#endif - -#endif /* _AR71XX_DEV_AP91_PCI_H */ - diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap94-pci.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap94-pci.c deleted file mode 100644 index 05b5be4491..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap94-pci.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * Atheros AP94 reference board PCI initialization - * - * Copyright (C) 2009-2010 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include - -#include -#include - -#include "dev-ap94-pci.h" -#include "pci-ath9k-fixup.h" - -static struct ath9k_platform_data ap94_wmac0_data = { - .led_pin = -1, -}; -static struct ath9k_platform_data ap94_wmac1_data = { - .led_pin = -1, -}; -static char ap94_wmac0_mac[6]; -static char ap94_wmac1_mac[6]; - -static struct ar71xx_pci_irq ap94_pci_irqs[] __initdata = { - { - .slot = 0, - .pin = 1, - .irq = AR71XX_PCI_IRQ_DEV0, - }, { - .slot = 1, - .pin = 1, - .irq = AR71XX_PCI_IRQ_DEV1, - } -}; - -static int ap94_pci_plat_dev_init(struct pci_dev *dev) -{ - switch (PCI_SLOT(dev->devfn)) { - case 17: - dev->dev.platform_data = &ap94_wmac0_data; - break; - - case 18: - dev->dev.platform_data = &ap94_wmac1_data; - break; - } - - return 0; -} - -__init void ap94_pci_setup_wmac_led_pin(unsigned wmac, int pin) -{ - switch (wmac) { - case 0: - ap94_wmac0_data.led_pin = pin; - break; - case 1: - ap94_wmac1_data.led_pin = pin; - break; - } -} - -__init void ap94_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val) -{ - switch (wmac) { - case 0: - ap94_wmac0_data.gpio_mask = mask; - ap94_wmac0_data.gpio_val = val; - break; - case 1: - ap94_wmac1_data.gpio_mask = mask; - ap94_wmac1_data.gpio_val = val; - break; - } -} - -void __init ap94_pci_init(u8 *cal_data0, u8 *mac_addr0, - u8 *cal_data1, u8 *mac_addr1) -{ - if (cal_data0) - memcpy(ap94_wmac0_data.eeprom_data, cal_data0, - sizeof(ap94_wmac0_data.eeprom_data)); - - if (cal_data1) - memcpy(ap94_wmac1_data.eeprom_data, cal_data1, - sizeof(ap94_wmac1_data.eeprom_data)); - - if (mac_addr0) { - memcpy(ap94_wmac0_mac, mac_addr0, sizeof(ap94_wmac0_mac)); - ap94_wmac0_data.macaddr = ap94_wmac0_mac; - } - - if (mac_addr1) { - memcpy(ap94_wmac1_mac, mac_addr1, sizeof(ap94_wmac1_mac)); - ap94_wmac1_data.macaddr = ap94_wmac1_mac; - } - - ar71xx_pci_plat_dev_init = ap94_pci_plat_dev_init; - ar71xx_pci_init(ARRAY_SIZE(ap94_pci_irqs), ap94_pci_irqs); - - pci_enable_ath9k_fixup(17, ap94_wmac0_data.eeprom_data); - pci_enable_ath9k_fixup(18, ap94_wmac1_data.eeprom_data); -} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap94-pci.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap94-pci.h deleted file mode 100644 index 4584528981..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap94-pci.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Atheros AP94 reference board PCI initialization - * - * Copyright (C) 2009-2010 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _AR71XX_DEV_AP94_PCI_H -#define _AR71XX_DEV_AP94_PCI_H - -#if defined(CONFIG_AR71XX_DEV_AP94_PCI) -void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0, - u8 *cal_data1, u8 *mac_addr1) __init; - -void ap94_pci_setup_wmac_led_pin(unsigned wmac, int pin) __init; -void ap94_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val) __init; - -#else -static inline void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0, - u8 *cal_data1, u8 *mac_addr1) {} - -static inline void ap94_pci_setup_wmac_led_pin(unsigned wmac, int pin) {} -static inline void ap94_pci_setup_wmac_gpio(unsigned wmac, - u32 mask, u32 val) {} -#endif - -#endif /* _AR71XX_DEV_AP94_PCI_H */ - diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.c deleted file mode 100644 index 90db388967..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * Atheros AR9XXX SoCs built-in WMAC device support - * - * Copyright (C) 2010-2011 Jaiganesh Narayanan - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Parts of this file are based on Atheros 2.6.15/2.6.31 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include - -#include - -#include "dev-ar9xxx-wmac.h" - -#define MHZ_25 (25 * 1000 * 1000) - -static struct ath9k_platform_data ar9xxx_wmac_data = { - .led_pin = -1, -}; -static char ar9xxx_wmac_mac[6]; - -static struct resource ar9xxx_wmac_resources[] = { - { - /* .start and .end fields are filled dynamically */ - .flags = IORESOURCE_MEM, - }, { - .start = AR71XX_CPU_IRQ_IP2, - .end = AR71XX_CPU_IRQ_IP2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device ar9xxx_wmac_device = { - .name = "ath9k", - .id = -1, - .resource = ar9xxx_wmac_resources, - .num_resources = ARRAY_SIZE(ar9xxx_wmac_resources), - .dev = { - .platform_data = &ar9xxx_wmac_data, - }, -}; - -static void ar913x_wmac_init(void) -{ - ar71xx_device_stop(RESET_MODULE_AMBA2WMAC); - mdelay(10); - - ar71xx_device_start(RESET_MODULE_AMBA2WMAC); - mdelay(10); - - ar9xxx_wmac_resources[0].start = AR91XX_WMAC_BASE; - ar9xxx_wmac_resources[0].end = AR91XX_WMAC_BASE + AR91XX_WMAC_SIZE - 1; -} - -static int ar933x_r1_get_wmac_revision(void) -{ - return ar71xx_soc_rev; -} - -static int ar933x_wmac_reset(void) -{ - unsigned retries = 0; - - ar71xx_device_stop(AR933X_RESET_WMAC); - ar71xx_device_start(AR933X_RESET_WMAC); - - while (1) { - u32 bootstrap; - - bootstrap = ar71xx_reset_rr(AR933X_RESET_REG_BOOTSTRAP); - if ((bootstrap & AR933X_BOOTSTRAP_EEPBUSY) == 0) - return 0; - - if (retries > 20) - break; - - udelay(10000); - retries++; - } - - pr_err("ar93xx: WMAC reset timed out"); - return -ETIMEDOUT; -} - -static void ar933x_wmac_init(void) -{ - ar9xxx_wmac_device.name = "ar933x_wmac"; - ar9xxx_wmac_resources[0].start = AR933X_WMAC_BASE; - ar9xxx_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1; - if (ar71xx_ref_freq == MHZ_25) - ar9xxx_wmac_data.is_clk_25mhz = true; - - if (ar71xx_soc_rev == 1) - ar9xxx_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision; - - ar9xxx_wmac_data.external_reset = ar933x_wmac_reset; - - ar933x_wmac_reset(); -} - -static void ar934x_wmac_init(void) -{ - ar9xxx_wmac_device.name = "ar934x_wmac"; - ar9xxx_wmac_resources[0].start = AR934X_WMAC_BASE; - ar9xxx_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1; - ar9xxx_wmac_resources[1].start = AR934X_IP2_IRQ_WMAC; - ar9xxx_wmac_resources[1].start = AR934X_IP2_IRQ_WMAC; - if (ar71xx_ref_freq == MHZ_25) - ar9xxx_wmac_data.is_clk_25mhz = true; -} - -void __init ar9xxx_add_device_wmac(u8 *cal_data, u8 *mac_addr) -{ - switch (ar71xx_soc) { - case AR71XX_SOC_AR9130: - case AR71XX_SOC_AR9132: - ar913x_wmac_init(); - break; - - case AR71XX_SOC_AR9330: - case AR71XX_SOC_AR9331: - ar933x_wmac_init(); - break; - - case AR71XX_SOC_AR9341: - case AR71XX_SOC_AR9342: - case AR71XX_SOC_AR9344: - ar934x_wmac_init(); - break; - - default: - BUG(); - } - - if (cal_data) - memcpy(ar9xxx_wmac_data.eeprom_data, cal_data, - sizeof(ar9xxx_wmac_data.eeprom_data)); - - if (mac_addr) { - memcpy(ar9xxx_wmac_mac, mac_addr, sizeof(ar9xxx_wmac_mac)); - ar9xxx_wmac_data.macaddr = ar9xxx_wmac_mac; - } - - platform_device_register(&ar9xxx_wmac_device); -} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.h deleted file mode 100644 index 4fa7ec2d30..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Atheros AR9XXX SoCs built-in WMAC device support - * - * Copyright (C) 2010-2011 Jaiganesh Narayanan - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Parts of this file are based on Atheros 2.6.15/2.6.31 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _AR71XX_DEV_AR9XXX_WMAC_H -#define _AR71XX_DEV_AR9XXX_WMAC_H - -void ar9xxx_add_device_wmac(u8 *cal_data, u8 *mac_addr) __init; - -#endif /* _AR71XX_DEV_AR9XXX_WMAC_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-db120-pci.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-db120-pci.c deleted file mode 100644 index 6e6e583767..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-db120-pci.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Atheros db120 reference board PCI initialization - * - * Copyright (C) 2010-2011 Jaiganesh Narayanan - * Copyright (C) 2011 Gabor Juhos - * - * Parts of this file are based on Atheros linux 2.6.31 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include - -#include -#include - -#include "dev-db120-pci.h" - -static struct ath9k_platform_data db120_wmac_data = { - .led_pin = -1, -}; -static char db120_wmac_mac[6]; - -static struct ar71xx_pci_irq db120_pci_irqs[] __initdata = { - { - .slot = 0, - .pin = 1, - .irq = AR71XX_PCI_IRQ_DEV0, - } -}; - -static int db120_pci_plat_dev_init(struct pci_dev *dev) -{ - switch (PCI_SLOT(dev->devfn)) { - case 0: - dev->dev.platform_data = &db120_wmac_data; - break; - } - - return 0; -} - -void __init db120_pci_init(u8 *cal_data, u8 *mac_addr) -{ - if (cal_data) - memcpy(db120_wmac_data.eeprom_data, cal_data, - sizeof(db120_wmac_data.eeprom_data)); - - if (mac_addr) { - memcpy(db120_wmac_mac, mac_addr, sizeof(db120_wmac_mac)); - db120_wmac_data.macaddr = db120_wmac_mac; - } - - ar71xx_pci_plat_dev_init = db120_pci_plat_dev_init; - ar71xx_pci_init(ARRAY_SIZE(db120_pci_irqs), db120_pci_irqs); -} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-db120-pci.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-db120-pci.h deleted file mode 100644 index b96d989552..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-db120-pci.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Atheros DB120 reference board PCI initialization - * - * Copyright (C) 2010-2011 Jaiganesh Narayanan - * Copyright (C) 2011 Gabor Juhos - * - * Parts of this file are based on Atheros linux 2.6.31 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _AR71XX_DEV_DB120_PCI_H -#define _AR71XX_DEV_DB120_PCI_H - -#if defined(CONFIG_AR71XX_DEV_DB120_PCI) -void db120_pci_init(u8 *cal_data, u8 *mac_addr); -#else -static inline void db120_pci_init(u8 *cal_data, u8 *mac_addr) { } -#endif - -#endif /* _AR71XX_DEV_DB120_PCI_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-dsa.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-dsa.c deleted file mode 100644 index 8b8fcfac3e..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-dsa.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Atheros AR71xx DSA switch device support - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include - -#include - -#include "devices.h" -#include "dev-dsa.h" - -static struct platform_device ar71xx_dsa_switch_device = { - .name = "dsa", - .id = 0, -}; - -void __init ar71xx_add_device_dsa(struct device *netdev, - struct device *miidev, - struct dsa_platform_data *d) -{ - int i; - - d->netdev = netdev; - for (i = 0; i < d->nr_chips; i++) - d->chip[i].mii_bus = miidev; - - ar71xx_dsa_switch_device.dev.platform_data = d; - - platform_device_register(&ar71xx_dsa_switch_device); -} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-dsa.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-dsa.h deleted file mode 100644 index 25b988130d..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-dsa.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Atheros AR71xx DSA switch device support - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _AR71XX_DEV_DSA_H -#define _AR71XX_DEV_DSA_H - -#include - -void ar71xx_add_device_dsa(struct device *netdev, - struct device *miidev, - struct dsa_platform_data *d) __init; - -#endif /* _AR71XX_DEV_DSA_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.c deleted file mode 100644 index c22e652f19..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Atheros AR71xx GPIO button support - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include "linux/init.h" -#include "linux/slab.h" -#include - -#include "dev-gpio-buttons.h" - -void __init ar71xx_register_gpio_keys_polled(int id, - unsigned poll_interval, - unsigned nbuttons, - struct gpio_keys_button *buttons) -{ - struct platform_device *pdev; - struct gpio_keys_platform_data pdata; - struct gpio_keys_button *p; - int err; - - p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL); - if (!p) - return; - - memcpy(p, buttons, nbuttons * sizeof(*p)); - - pdev = platform_device_alloc("gpio-keys-polled", id); - if (!pdev) - goto err_free_buttons; - - memset(&pdata, 0, sizeof(pdata)); - pdata.poll_interval = poll_interval; - pdata.nbuttons = nbuttons; - pdata.buttons = p; - - err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); - if (err) - goto err_put_pdev; - - err = platform_device_add(pdev); - if (err) - goto err_put_pdev; - - return; - -err_put_pdev: - platform_device_put(pdev); - -err_free_buttons: - kfree(p); -} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.h deleted file mode 100644 index 5ed8634893..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Atheros AR71xx GPIO button support - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _AR71XX_DEV_GPIO_BUTTONS_H -#define _AR71XX_DEV_GPIO_BUTTONS_H - -#include -#include - -void ar71xx_register_gpio_keys_polled(int id, - unsigned poll_interval, - unsigned nbuttons, - struct gpio_keys_button *buttons); - -#endif /* _AR71XX_DEV_GPIO_BUTTONS_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-leds-gpio.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-leds-gpio.c deleted file mode 100644 index 0fb8c6db6a..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-leds-gpio.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Atheros AR71xx GPIO LED device support - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Parts of this file are based on Atheros' 2.6.15 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include - -#include "dev-leds-gpio.h" - -void __init ar71xx_add_device_leds_gpio(int id, unsigned num_leds, - struct gpio_led *leds) -{ - struct platform_device *pdev; - struct gpio_led_platform_data pdata; - struct gpio_led *p; - int err; - - p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL); - if (!p) - return; - - memcpy(p, leds, num_leds * sizeof(*p)); - - pdev = platform_device_alloc("leds-gpio", id); - if (!pdev) - goto err_free_leds; - - memset(&pdata, 0, sizeof(pdata)); - pdata.num_leds = num_leds; - pdata.leds = p; - - err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); - if (err) - goto err_put_pdev; - - err = platform_device_add(pdev); - if (err) - goto err_put_pdev; - - return; - -err_put_pdev: - platform_device_put(pdev); - -err_free_leds: - kfree(p); -} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-leds-gpio.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-leds-gpio.h deleted file mode 100644 index ab4a89d833..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-leds-gpio.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Atheros AR71xx GPIO LED device support - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _AR71XX_DEV_LEDS_GPIO_H -#define _AR71XX_DEV_LEDS_GPIO_H - -#include - -void ar71xx_add_device_leds_gpio(int id, - unsigned num_leds, - struct gpio_led *leds) __init; - -#endif /* _AR71XX_DEV_LEDS_GPIO_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-m25p80.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-m25p80.c deleted file mode 100644 index cf6580ec02..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-m25p80.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Copyright (C) 2009 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include - -#include "devices.h" -#include "dev-m25p80.h" - -static struct spi_board_info ar71xx_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p80", - }, - { - .bus_num = 0, - .chip_select = 1, - .max_speed_hz = 25000000, - .modalias = "m25p80", - } -}; - -void __init ar71xx_add_device_m25p80(struct flash_platform_data *pdata) -{ - ar71xx_spi_info[0].platform_data = pdata; - ar71xx_add_device_spi(NULL, ar71xx_spi_info, 1); -} - -static struct flash_platform_data *multi_pdata; - -static struct mtd_info *concat_devs[2] = { NULL, NULL }; -static struct work_struct mtd_concat_work; - -static void mtd_concat_add_work(struct work_struct *work) -{ - struct mtd_info *mtd; - - mtd = mtd_concat_create(concat_devs, ARRAY_SIZE(concat_devs), "flash"); - -#ifdef CONFIG_MTD_PARTITIONS - add_mtd_partitions(mtd, multi_pdata->parts, multi_pdata->nr_parts); -#else - add_mtd_device(mtd); -#endif -} - -static void mtd_concat_add(struct mtd_info *mtd) -{ - static bool registered = false; - - if (registered) - return; - - if (!strcmp(mtd->name, "spi0.0")) - concat_devs[0] = mtd; - else if (!strcmp(mtd->name, "spi0.1")) - concat_devs[1] = mtd; - else - return; - - if (!concat_devs[0] || !concat_devs[1]) - return; - - registered = true; - INIT_WORK(&mtd_concat_work, mtd_concat_add_work); - schedule_work(&mtd_concat_work); -} - -static void mtd_concat_remove(struct mtd_info *mtd) -{ -} - -static void add_mtd_concat_notifier(void) -{ - static struct mtd_notifier not = { - .add = mtd_concat_add, - .remove = mtd_concat_remove, - }; - - register_mtd_user(¬); -} - - -void __init ar71xx_add_device_m25p80_multi(struct flash_platform_data *pdata) -{ - multi_pdata = pdata; - add_mtd_concat_notifier(); - ar71xx_add_device_spi(NULL, ar71xx_spi_info, ARRAY_SIZE(ar71xx_spi_info)); -} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-m25p80.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-m25p80.h deleted file mode 100644 index f732a8438a..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-m25p80.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright (C) 2009 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _AR71XX_DEV_M25P80_H -#define _AR71XX_DEV_M25P80_H - -#include - -void ar71xx_add_device_m25p80(struct flash_platform_data *pdata) __init; -void ar71xx_add_device_m25p80_multi(struct flash_platform_data *pdata) __init; - -#endif /* _AR71XX_DEV_M25P80_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb42-pci.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb42-pci.c deleted file mode 100644 index 0678567a2f..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb42-pci.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * Atheros PB42 reference board PCI initialization - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Parts of this file are based on Atheros' 2.6.15 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include -#include - -#include "dev-pb42-pci.h" - -static struct ar71xx_pci_irq pb42_pci_irqs[] __initdata = { - { - .slot = 0, - .pin = 1, - .irq = AR71XX_PCI_IRQ_DEV0, - }, { - .slot = 1, - .pin = 1, - .irq = AR71XX_PCI_IRQ_DEV1, - }, { - .slot = 2, - .pin = 1, - .irq = AR71XX_PCI_IRQ_DEV2, - } -}; - -void __init pb42_pci_init(void) -{ - ar71xx_pci_init(ARRAY_SIZE(pb42_pci_irqs), pb42_pci_irqs); -} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb42-pci.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb42-pci.h deleted file mode 100644 index f9ef951233..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb42-pci.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Atheros PB42 reference board PCI initialization - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _AR71XX_DEV_PB42_PCI_H -#define _AR71XX_DEV_PB42_PCI_H - -#if defined(CONFIG_AR71XX_DEV_PB42_PCI) -void pb42_pci_init(void) __init; -#else -static inline void pb42_pci_init(void) { } -#endif - -#endif /* _AR71XX_DEV_PB42_PCI_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.c deleted file mode 100644 index 762bd55343..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.c +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Atheros PB9x reference board PCI initialization - * - * Copyright (C) 2010 Felix Fietkau - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Parts of this file are based on Atheros' 2.6.15 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include -#include - -#include "dev-pb9x-pci.h" - -static struct ar71xx_pci_irq pb9x_pci_irqs[] __initdata = { - { - .slot = 0, - .pin = 1, - .irq = AR71XX_PCI_IRQ_DEV0, - } -}; - -void __init pb9x_pci_init(void) -{ - ar71xx_pci_init(ARRAY_SIZE(pb9x_pci_irqs), pb9x_pci_irqs); -} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.h deleted file mode 100644 index be53f0a66c..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Atheros PB9x reference board PCI initialization - * - * Copyright (C) 2010 Felix Fietkau - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _AR71XX_DEV_PB9X_PCI_H -#define _AR71XX_DEV_PB9X_PCI_H - -#if defined(CONFIG_AR71XX_DEV_PB9X_PCI) -void pb9x_pci_init(void) __init; -#else -static inline void pb9x_pci_init(void) { } -#endif - -#endif /* _AR71XX_DEV_PB9X_PCI_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-usb.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-usb.c deleted file mode 100644 index 57c7ef292c..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-usb.c +++ /dev/null @@ -1,246 +0,0 @@ -/* - * Atheros AR71xx USB host device support - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Parts of this file are based on Atheros' 2.6.15 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include - -#include -#include - -#include "dev-usb.h" - -/* - * OHCI (USB full speed host controller) - */ -static struct resource ar71xx_ohci_resources[] = { - [0] = { - .start = AR71XX_OHCI_BASE, - .end = AR71XX_OHCI_BASE + AR71XX_OHCI_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AR71XX_MISC_IRQ_OHCI, - .end = AR71XX_MISC_IRQ_OHCI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource ar7240_ohci_resources[] = { - [0] = { - .start = AR7240_OHCI_BASE, - .end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AR71XX_CPU_IRQ_USB, - .end = AR71XX_CPU_IRQ_USB, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 ar71xx_ohci_dmamask = DMA_BIT_MASK(32); -static struct platform_device ar71xx_ohci_device = { - .name = "ar71xx-ohci", - .id = -1, - .resource = ar71xx_ohci_resources, - .num_resources = ARRAY_SIZE(ar71xx_ohci_resources), - .dev = { - .dma_mask = &ar71xx_ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -/* - * EHCI (USB high/full speed host controller) - */ -static struct resource ar71xx_ehci_resources[] = { - [0] = { - .start = AR71XX_EHCI_BASE, - .end = AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AR71XX_CPU_IRQ_USB, - .end = AR71XX_CPU_IRQ_USB, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 ar71xx_ehci_dmamask = DMA_BIT_MASK(32); -static struct ar71xx_ehci_platform_data ar71xx_ehci_data; - -static struct platform_device ar71xx_ehci_device = { - .name = "ar71xx-ehci", - .id = -1, - .resource = ar71xx_ehci_resources, - .num_resources = ARRAY_SIZE(ar71xx_ehci_resources), - .dev = { - .dma_mask = &ar71xx_ehci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &ar71xx_ehci_data, - }, -}; - -#define AR71XX_USB_RESET_MASK \ - (RESET_MODULE_USB_HOST | RESET_MODULE_USB_PHY \ - | RESET_MODULE_USB_OHCI_DLL) - -#define AR7240_USB_RESET_MASK \ - (RESET_MODULE_USB_HOST | RESET_MODULE_USB_OHCI_DLL_7240) - -static void __init ar71xx_usb_setup(void) -{ - ar71xx_device_stop(AR71XX_USB_RESET_MASK); - mdelay(1000); - ar71xx_device_start(AR71XX_USB_RESET_MASK); - - /* Turning on the Buff and Desc swap bits */ - ar71xx_usb_ctrl_wr(USB_CTRL_REG_CONFIG, 0xf0000); - - /* WAR for HW bug. Here it adjusts the duration between two SOFS */ - ar71xx_usb_ctrl_wr(USB_CTRL_REG_FLADJ, 0x20c00); - - mdelay(900); - - platform_device_register(&ar71xx_ohci_device); - platform_device_register(&ar71xx_ehci_device); -} - -static void __init ar7240_usb_setup(void) -{ - ar71xx_device_stop(AR7240_USB_RESET_MASK); - mdelay(1000); - ar71xx_device_start(AR7240_USB_RESET_MASK); - - /* WAR for HW bug. Here it adjusts the duration between two SOFS */ - ar71xx_usb_ctrl_wr(USB_CTRL_REG_FLADJ, 0x3); - - ar71xx_ohci_device.resource = ar7240_ohci_resources; - ar71xx_ohci_device.num_resources = ARRAY_SIZE(ar7240_ohci_resources); - platform_device_register(&ar71xx_ohci_device); -} - -static void __init ar7241_usb_setup(void) -{ - ar71xx_device_start(AR724X_RESET_USBSUS_OVERRIDE); - mdelay(10); - - ar71xx_device_start(AR724X_RESET_USB_HOST); - mdelay(10); - - ar71xx_device_start(AR724X_RESET_USB_PHY); - mdelay(10); - - ar71xx_ehci_data.is_ar91xx = 1; - ar71xx_ehci_device.resource = ar7240_ohci_resources; - ar71xx_ehci_device.num_resources = ARRAY_SIZE(ar7240_ohci_resources); - platform_device_register(&ar71xx_ehci_device); -} - -static void __init ar91xx_usb_setup(void) -{ - ar71xx_device_stop(RESET_MODULE_USBSUS_OVERRIDE); - mdelay(10); - - ar71xx_device_start(RESET_MODULE_USB_HOST); - mdelay(10); - - ar71xx_device_start(RESET_MODULE_USB_PHY); - mdelay(10); - - ar71xx_ehci_data.is_ar91xx = 1; - platform_device_register(&ar71xx_ehci_device); -} - -static void __init ar933x_usb_setup(void) -{ - ar71xx_device_reset_rmw(0, AR933X_RESET_USBSUS_OVERRIDE); - mdelay(10); - - ar71xx_device_reset_rmw(AR933X_RESET_USB_HOST, - AR933X_RESET_USBSUS_OVERRIDE); - mdelay(10); - - ar71xx_device_reset_rmw(AR933X_RESET_USB_PHY, - AR933X_RESET_USBSUS_OVERRIDE); - mdelay(10); - - ar71xx_ehci_data.is_ar91xx = 1; - platform_device_register(&ar71xx_ehci_device); -} - -static void __init ar934x_usb_setup(void) -{ - u32 bootstrap; - - bootstrap = ar71xx_reset_rr(AR934X_RESET_REG_BOOTSTRAP); - if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE) - return; - - ar71xx_device_stop(AR934X_RESET_USBSUS_OVERRIDE); - udelay(1000); - - ar71xx_device_start(AR934X_RESET_USB_PHY); - udelay(1000); - - ar71xx_device_start(AR934X_RESET_USB_PHY_ANALOG); - udelay(1000); - - ar71xx_device_start(AR934X_RESET_USB_HOST); - udelay(1000); - - ar71xx_ehci_data.is_ar91xx = 1; - platform_device_register(&ar71xx_ehci_device); -} - -void __init ar71xx_add_device_usb(void) -{ - switch (ar71xx_soc) { - case AR71XX_SOC_AR7240: - ar7240_usb_setup(); - break; - - case AR71XX_SOC_AR7241: - case AR71XX_SOC_AR7242: - ar7241_usb_setup(); - break; - - case AR71XX_SOC_AR7130: - case AR71XX_SOC_AR7141: - case AR71XX_SOC_AR7161: - ar71xx_usb_setup(); - break; - - case AR71XX_SOC_AR9130: - case AR71XX_SOC_AR9132: - ar91xx_usb_setup(); - break; - - case AR71XX_SOC_AR9330: - case AR71XX_SOC_AR9331: - ar933x_usb_setup(); - break; - - case AR71XX_SOC_AR9341: - case AR71XX_SOC_AR9342: - case AR71XX_SOC_AR9344: - ar934x_usb_setup(); - break; - - default: - BUG(); - } -} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-usb.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-usb.h deleted file mode 100644 index aa49f539cc..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-usb.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Atheros AR71xx USB host device support - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _AR71XX_DEV_USB_H -#define _AR71XX_DEV_USB_H - -void ar71xx_add_device_usb(void) __init; - -#endif /* _AR71XX_DEV_USB_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/devices.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/devices.c deleted file mode 100644 index 75b24b0043..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/devices.c +++ /dev/null @@ -1,1076 +0,0 @@ -/* - * Atheros AR71xx SoC platform devices - * - * Copyright (C) 2010-2011 Jaiganesh Narayanan - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Parts of this file are based on Atheros 2.6.15 BSP - * Parts of this file are based on Atheros 2.6.31 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "devices.h" - -unsigned char ar71xx_mac_base[ETH_ALEN] __initdata; - -static struct resource ar71xx_uart_resources[] = { - { - .start = AR71XX_UART_BASE, - .end = AR71XX_UART_BASE + AR71XX_UART_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -#define AR71XX_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP) -static struct plat_serial8250_port ar71xx_uart_data[] = { - { - .mapbase = AR71XX_UART_BASE, - .irq = AR71XX_MISC_IRQ_UART, - .flags = AR71XX_UART_FLAGS, - .iotype = UPIO_MEM32, - .regshift = 2, - }, { - /* terminating entry */ - } -}; - -static struct platform_device ar71xx_uart_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .resource = ar71xx_uart_resources, - .num_resources = ARRAY_SIZE(ar71xx_uart_resources), - .dev = { - .platform_data = ar71xx_uart_data - }, -}; - -static struct resource ar933x_uart_resources[] = { - { - .start = AR933X_UART_BASE, - .end = AR933X_UART_BASE + AR71XX_UART_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AR71XX_MISC_IRQ_UART, - .end = AR71XX_MISC_IRQ_UART, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct ar933x_uart_platform_data ar933x_uart_data; -static struct platform_device ar933x_uart_device = { - .name = "ar933x-uart", - .id = -1, - .resource = ar933x_uart_resources, - .num_resources = ARRAY_SIZE(ar933x_uart_resources), - .dev = { - .platform_data = &ar933x_uart_data, - }, -}; - -void __init ar71xx_add_device_uart(void) -{ - struct platform_device *pdev; - - switch (ar71xx_soc) { - case AR71XX_SOC_AR7130: - case AR71XX_SOC_AR7141: - case AR71XX_SOC_AR7161: - case AR71XX_SOC_AR7240: - case AR71XX_SOC_AR7241: - case AR71XX_SOC_AR7242: - case AR71XX_SOC_AR9130: - case AR71XX_SOC_AR9132: - pdev = &ar71xx_uart_device; - ar71xx_uart_data[0].uartclk = ar71xx_ahb_freq; - break; - - case AR71XX_SOC_AR9330: - case AR71XX_SOC_AR9331: - pdev = &ar933x_uart_device; - ar933x_uart_data.uartclk = ar71xx_ref_freq; - break; - - case AR71XX_SOC_AR9341: - case AR71XX_SOC_AR9342: - case AR71XX_SOC_AR9344: - pdev = &ar71xx_uart_device; - ar71xx_uart_data[0].uartclk = ar71xx_ref_freq; - break; - - default: - BUG(); - } - - platform_device_register(pdev); -} - -static struct resource ar71xx_mdio0_resources[] = { - { - .name = "mdio_base", - .flags = IORESOURCE_MEM, - .start = AR71XX_GE0_BASE, - .end = AR71XX_GE0_BASE + 0x200 - 1, - } -}; - -static struct ag71xx_mdio_platform_data ar71xx_mdio0_data; - -struct platform_device ar71xx_mdio0_device = { - .name = "ag71xx-mdio", - .id = 0, - .resource = ar71xx_mdio0_resources, - .num_resources = ARRAY_SIZE(ar71xx_mdio0_resources), - .dev = { - .platform_data = &ar71xx_mdio0_data, - }, -}; - -static struct resource ar71xx_mdio1_resources[] = { - { - .name = "mdio_base", - .flags = IORESOURCE_MEM, - .start = AR71XX_GE1_BASE, - .end = AR71XX_GE1_BASE + 0x200 - 1, - } -}; - -static struct ag71xx_mdio_platform_data ar71xx_mdio1_data; - -struct platform_device ar71xx_mdio1_device = { - .name = "ag71xx-mdio", - .id = 1, - .resource = ar71xx_mdio1_resources, - .num_resources = ARRAY_SIZE(ar71xx_mdio1_resources), - .dev = { - .platform_data = &ar71xx_mdio1_data, - }, -}; - -static void ar71xx_set_pll(u32 cfg_reg, u32 pll_reg, u32 pll_val, u32 shift) -{ - void __iomem *base; - u32 t; - - base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE); - - t = __raw_readl(base + cfg_reg); - t &= ~(3 << shift); - t |= (2 << shift); - __raw_writel(t, base + cfg_reg); - udelay(100); - - __raw_writel(pll_val, base + pll_reg); - - t |= (3 << shift); - __raw_writel(t, base + cfg_reg); - udelay(100); - - t &= ~(3 << shift); - __raw_writel(t, base + cfg_reg); - udelay(100); - - printk(KERN_DEBUG "ar71xx: pll_reg %#x: %#x\n", - (unsigned int)(base + pll_reg), __raw_readl(base + pll_reg)); - - iounmap(base); -} - -static void __init ar71xx_mii_ctrl_set_if(unsigned int reg, - unsigned int mii_if) -{ - void __iomem *base; - u32 t; - - base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE); - - t = __raw_readl(base + reg); - t &= ~(MII_CTRL_IF_MASK); - t |= (mii_if & MII_CTRL_IF_MASK); - __raw_writel(t, base + reg); - - iounmap(base); -} - -static void ar71xx_mii_ctrl_set_speed(unsigned int reg, unsigned int speed) -{ - void __iomem *base; - unsigned int mii_speed; - u32 t; - - switch (speed) { - case SPEED_10: - mii_speed = MII_CTRL_SPEED_10; - break; - case SPEED_100: - mii_speed = MII_CTRL_SPEED_100; - break; - case SPEED_1000: - mii_speed = MII_CTRL_SPEED_1000; - break; - default: - BUG(); - } - - base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE); - - t = __raw_readl(base + reg); - t &= ~(MII_CTRL_SPEED_MASK << MII_CTRL_SPEED_SHIFT); - t |= mii_speed << MII_CTRL_SPEED_SHIFT; - __raw_writel(t, base + reg); - - iounmap(base); -} - -void __init ar71xx_add_device_mdio(unsigned int id, u32 phy_mask) -{ - struct platform_device *mdio_dev; - struct ag71xx_mdio_platform_data *mdio_data; - unsigned int max_id; - - if (ar71xx_soc == AR71XX_SOC_AR9341 || - ar71xx_soc == AR71XX_SOC_AR9342 || - ar71xx_soc == AR71XX_SOC_AR9344) - max_id = 1; - else - max_id = 0; - - if (id > max_id) { - printk(KERN_ERR "ar71xx: invalid MDIO id %u\n", id); - return; - } - - switch (ar71xx_soc) { - case AR71XX_SOC_AR7241: - case AR71XX_SOC_AR9330: - case AR71XX_SOC_AR9331: - mdio_dev = &ar71xx_mdio1_device; - mdio_data = &ar71xx_mdio1_data; - break; - - case AR71XX_SOC_AR9341: - case AR71XX_SOC_AR9342: - case AR71XX_SOC_AR9344: - if (id == 0) { - mdio_dev = &ar71xx_mdio0_device; - mdio_data = &ar71xx_mdio0_data; - } else { - mdio_dev = &ar71xx_mdio1_device; - mdio_data = &ar71xx_mdio1_data; - } - break; - - case AR71XX_SOC_AR7242: - ar71xx_set_pll(AR71XX_PLL_REG_SEC_CONFIG, - AR7242_PLL_REG_ETH0_INT_CLOCK, 0x62000000, - AR71XX_ETH0_PLL_SHIFT); - /* fall through */ - default: - mdio_dev = &ar71xx_mdio0_device; - mdio_data = &ar71xx_mdio0_data; - break; - } - - mdio_data->phy_mask = phy_mask; - - switch (ar71xx_soc) { - case AR71XX_SOC_AR7240: - case AR71XX_SOC_AR7241: - case AR71XX_SOC_AR9330: - case AR71XX_SOC_AR9331: - mdio_data->is_ar7240 = 1; - break; - - case AR71XX_SOC_AR9341: - case AR71XX_SOC_AR9342: - case AR71XX_SOC_AR9344: - if (id == 1) - mdio_data->is_ar7240 = 1; - break; - - default: - break; - } - - platform_device_register(mdio_dev); -} - -struct ar71xx_eth_pll_data ar71xx_eth0_pll_data; -struct ar71xx_eth_pll_data ar71xx_eth1_pll_data; - -static u32 ar71xx_get_eth_pll(unsigned int mac, int speed) -{ - struct ar71xx_eth_pll_data *pll_data; - u32 pll_val; - - switch (mac) { - case 0: - pll_data = &ar71xx_eth0_pll_data; - break; - case 1: - pll_data = &ar71xx_eth1_pll_data; - break; - default: - BUG(); - } - - switch (speed) { - case SPEED_10: - pll_val = pll_data->pll_10; - break; - case SPEED_100: - pll_val = pll_data->pll_100; - break; - case SPEED_1000: - pll_val = pll_data->pll_1000; - break; - default: - BUG(); - } - - return pll_val; -} - -static void ar71xx_set_speed_ge0(int speed) -{ - u32 val = ar71xx_get_eth_pll(0, speed); - - ar71xx_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH0_INT_CLOCK, - val, AR71XX_ETH0_PLL_SHIFT); - ar71xx_mii_ctrl_set_speed(MII_REG_MII0_CTRL, speed); -} - -static void ar71xx_set_speed_ge1(int speed) -{ - u32 val = ar71xx_get_eth_pll(1, speed); - - ar71xx_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH1_INT_CLOCK, - val, AR71XX_ETH1_PLL_SHIFT); - ar71xx_mii_ctrl_set_speed(MII_REG_MII1_CTRL, speed); -} - -static void ar724x_set_speed_ge0(int speed) -{ - /* TODO */ -} - -static void ar724x_set_speed_ge1(int speed) -{ - /* TODO */ -} - -static void ar7242_set_speed_ge0(int speed) -{ - u32 val = ar71xx_get_eth_pll(0, speed); - void __iomem *base; - - base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE); - __raw_writel(val, base + AR7242_PLL_REG_ETH0_INT_CLOCK); - iounmap(base); -} - -static void ar91xx_set_speed_ge0(int speed) -{ - u32 val = ar71xx_get_eth_pll(0, speed); - - ar71xx_set_pll(AR91XX_PLL_REG_ETH_CONFIG, AR91XX_PLL_REG_ETH0_INT_CLOCK, - val, AR91XX_ETH0_PLL_SHIFT); - ar71xx_mii_ctrl_set_speed(MII_REG_MII0_CTRL, speed); -} - -static void ar91xx_set_speed_ge1(int speed) -{ - u32 val = ar71xx_get_eth_pll(1, speed); - - ar71xx_set_pll(AR91XX_PLL_REG_ETH_CONFIG, AR91XX_PLL_REG_ETH1_INT_CLOCK, - val, AR91XX_ETH1_PLL_SHIFT); - ar71xx_mii_ctrl_set_speed(MII_REG_MII1_CTRL, speed); -} - -static void ar933x_set_speed_ge0(int speed) -{ - /* TODO */ -} - -static void ar933x_set_speed_ge1(int speed) -{ - /* TODO */ -} - -static void ar934x_set_speed_ge0(int speed) -{ - /* TODO */ -} - -static void ar934x_set_speed_ge1(int speed) -{ - /* TODO */ -} - -static void ar71xx_ddr_flush_ge0(void) -{ - ar71xx_ddr_flush(AR71XX_DDR_REG_FLUSH_GE0); -} - -static void ar71xx_ddr_flush_ge1(void) -{ - ar71xx_ddr_flush(AR71XX_DDR_REG_FLUSH_GE1); -} - -static void ar724x_ddr_flush_ge0(void) -{ - ar71xx_ddr_flush(AR724X_DDR_REG_FLUSH_GE0); -} - -static void ar724x_ddr_flush_ge1(void) -{ - ar71xx_ddr_flush(AR724X_DDR_REG_FLUSH_GE1); -} - -static void ar91xx_ddr_flush_ge0(void) -{ - ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_GE0); -} - -static void ar91xx_ddr_flush_ge1(void) -{ - ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_GE1); -} - -static void ar933x_ddr_flush_ge0(void) -{ - ar71xx_ddr_flush(AR933X_DDR_REG_FLUSH_GE0); -} - -static void ar933x_ddr_flush_ge1(void) -{ - ar71xx_ddr_flush(AR933X_DDR_REG_FLUSH_GE1); -} - -static void ar934x_ddr_flush_ge0(void) -{ - ar71xx_ddr_flush(AR934X_DDR_REG_FLUSH_GE0); -} - -static void ar934x_ddr_flush_ge1(void) -{ - ar71xx_ddr_flush(AR934X_DDR_REG_FLUSH_GE1); -} - -static struct resource ar71xx_eth0_resources[] = { - { - .name = "mac_base", - .flags = IORESOURCE_MEM, - .start = AR71XX_GE0_BASE, - .end = AR71XX_GE0_BASE + 0x200 - 1, - }, { - .name = "mac_irq", - .flags = IORESOURCE_IRQ, - .start = AR71XX_CPU_IRQ_GE0, - .end = AR71XX_CPU_IRQ_GE0, - }, -}; - -struct ag71xx_platform_data ar71xx_eth0_data = { - .reset_bit = RESET_MODULE_GE0_MAC, -}; - -struct platform_device ar71xx_eth0_device = { - .name = "ag71xx", - .id = 0, - .resource = ar71xx_eth0_resources, - .num_resources = ARRAY_SIZE(ar71xx_eth0_resources), - .dev = { - .platform_data = &ar71xx_eth0_data, - }, -}; - -static struct resource ar71xx_eth1_resources[] = { - { - .name = "mac_base", - .flags = IORESOURCE_MEM, - .start = AR71XX_GE1_BASE, - .end = AR71XX_GE1_BASE + 0x200 - 1, - }, { - .name = "mac_irq", - .flags = IORESOURCE_IRQ, - .start = AR71XX_CPU_IRQ_GE1, - .end = AR71XX_CPU_IRQ_GE1, - }, -}; - -struct ag71xx_platform_data ar71xx_eth1_data = { - .reset_bit = RESET_MODULE_GE1_MAC, -}; - -struct platform_device ar71xx_eth1_device = { - .name = "ag71xx", - .id = 1, - .resource = ar71xx_eth1_resources, - .num_resources = ARRAY_SIZE(ar71xx_eth1_resources), - .dev = { - .platform_data = &ar71xx_eth1_data, - }, -}; - -struct ag71xx_switch_platform_data ar71xx_switch_data; - -#define AR71XX_PLL_VAL_1000 0x00110000 -#define AR71XX_PLL_VAL_100 0x00001099 -#define AR71XX_PLL_VAL_10 0x00991099 - -#define AR724X_PLL_VAL_1000 0x00110000 -#define AR724X_PLL_VAL_100 0x00001099 -#define AR724X_PLL_VAL_10 0x00991099 - -#define AR7242_PLL_VAL_1000 0x16000000 -#define AR7242_PLL_VAL_100 0x00000101 -#define AR7242_PLL_VAL_10 0x00001616 - -#define AR91XX_PLL_VAL_1000 0x1a000000 -#define AR91XX_PLL_VAL_100 0x13000a44 -#define AR91XX_PLL_VAL_10 0x00441099 - -#define AR933X_PLL_VAL_1000 0x00110000 -#define AR933X_PLL_VAL_100 0x00001099 -#define AR933X_PLL_VAL_10 0x00991099 - -#define AR934X_PLL_VAL_1000 0x00110000 -#define AR934X_PLL_VAL_100 0x00001099 -#define AR934X_PLL_VAL_10 0x00991099 - -static void __init ar71xx_init_eth_pll_data(unsigned int id) -{ - struct ar71xx_eth_pll_data *pll_data; - u32 pll_10, pll_100, pll_1000; - - switch (id) { - case 0: - pll_data = &ar71xx_eth0_pll_data; - break; - case 1: - pll_data = &ar71xx_eth1_pll_data; - break; - default: - BUG(); - } - - switch (ar71xx_soc) { - case AR71XX_SOC_AR7130: - case AR71XX_SOC_AR7141: - case AR71XX_SOC_AR7161: - pll_10 = AR71XX_PLL_VAL_10; - pll_100 = AR71XX_PLL_VAL_100; - pll_1000 = AR71XX_PLL_VAL_1000; - break; - - case AR71XX_SOC_AR7240: - case AR71XX_SOC_AR7241: - pll_10 = AR724X_PLL_VAL_10; - pll_100 = AR724X_PLL_VAL_100; - pll_1000 = AR724X_PLL_VAL_1000; - break; - - case AR71XX_SOC_AR7242: - pll_10 = AR7242_PLL_VAL_10; - pll_100 = AR7242_PLL_VAL_100; - pll_1000 = AR7242_PLL_VAL_1000; - break; - - case AR71XX_SOC_AR9130: - case AR71XX_SOC_AR9132: - pll_10 = AR91XX_PLL_VAL_10; - pll_100 = AR91XX_PLL_VAL_100; - pll_1000 = AR91XX_PLL_VAL_1000; - break; - - case AR71XX_SOC_AR9330: - case AR71XX_SOC_AR9331: - pll_10 = AR933X_PLL_VAL_10; - pll_100 = AR933X_PLL_VAL_100; - pll_1000 = AR933X_PLL_VAL_1000; - break; - - case AR71XX_SOC_AR9341: - case AR71XX_SOC_AR9342: - case AR71XX_SOC_AR9344: - pll_10 = AR934X_PLL_VAL_10; - pll_100 = AR934X_PLL_VAL_100; - pll_1000 = AR934X_PLL_VAL_1000; - break; - - default: - BUG(); - } - - if (!pll_data->pll_10) - pll_data->pll_10 = pll_10; - - if (!pll_data->pll_100) - pll_data->pll_100 = pll_100; - - if (!pll_data->pll_1000) - pll_data->pll_1000 = pll_1000; -} - -static int __init ar71xx_setup_phy_if_mode(unsigned int id, - struct ag71xx_platform_data *pdata) -{ - unsigned int mii_if; - - switch (id) { - case 0: - switch (ar71xx_soc) { - case AR71XX_SOC_AR7130: - case AR71XX_SOC_AR7141: - case AR71XX_SOC_AR7161: - case AR71XX_SOC_AR9130: - case AR71XX_SOC_AR9132: - switch (pdata->phy_if_mode) { - case PHY_INTERFACE_MODE_MII: - mii_if = MII0_CTRL_IF_MII; - break; - case PHY_INTERFACE_MODE_GMII: - mii_if = MII0_CTRL_IF_GMII; - break; - case PHY_INTERFACE_MODE_RGMII: - mii_if = MII0_CTRL_IF_RGMII; - break; - case PHY_INTERFACE_MODE_RMII: - mii_if = MII0_CTRL_IF_RMII; - break; - default: - return -EINVAL; - } - ar71xx_mii_ctrl_set_if(MII_REG_MII0_CTRL, mii_if); - break; - - case AR71XX_SOC_AR7240: - case AR71XX_SOC_AR7241: - case AR71XX_SOC_AR9330: - case AR71XX_SOC_AR9331: - pdata->phy_if_mode = PHY_INTERFACE_MODE_MII; - break; - - case AR71XX_SOC_AR7242: - /* FIXME */ - - case AR71XX_SOC_AR9341: - case AR71XX_SOC_AR9342: - case AR71XX_SOC_AR9344: - switch (pdata->phy_if_mode) { - case PHY_INTERFACE_MODE_MII: - case PHY_INTERFACE_MODE_GMII: - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RMII: - break; - default: - return -EINVAL; - } - break; - - default: - BUG(); - } - break; - case 1: - switch (ar71xx_soc) { - case AR71XX_SOC_AR7130: - case AR71XX_SOC_AR7141: - case AR71XX_SOC_AR7161: - case AR71XX_SOC_AR9130: - case AR71XX_SOC_AR9132: - switch (pdata->phy_if_mode) { - case PHY_INTERFACE_MODE_RMII: - mii_if = MII1_CTRL_IF_RMII; - break; - case PHY_INTERFACE_MODE_RGMII: - mii_if = MII1_CTRL_IF_RGMII; - break; - default: - return -EINVAL; - } - ar71xx_mii_ctrl_set_if(MII_REG_MII1_CTRL, mii_if); - break; - - case AR71XX_SOC_AR7240: - case AR71XX_SOC_AR7241: - case AR71XX_SOC_AR9330: - case AR71XX_SOC_AR9331: - pdata->phy_if_mode = PHY_INTERFACE_MODE_GMII; - break; - - case AR71XX_SOC_AR7242: - /* FIXME */ - - case AR71XX_SOC_AR9341: - case AR71XX_SOC_AR9342: - case AR71XX_SOC_AR9344: - switch (pdata->phy_if_mode) { - case PHY_INTERFACE_MODE_MII: - case PHY_INTERFACE_MODE_GMII: - break; - default: - return -EINVAL; - } - break; - - default: - BUG(); - } - break; - } - - return 0; -} - -static int ar71xx_eth_instance __initdata; -void __init ar71xx_add_device_eth(unsigned int id) -{ - struct platform_device *pdev; - struct ag71xx_platform_data *pdata; - int err; - - if (id > 1) { - printk(KERN_ERR "ar71xx: invalid ethernet id %d\n", id); - return; - } - - ar71xx_init_eth_pll_data(id); - - if (id == 0) - pdev = &ar71xx_eth0_device; - else - pdev = &ar71xx_eth1_device; - - pdata = pdev->dev.platform_data; - - err = ar71xx_setup_phy_if_mode(id, pdata); - if (err) { - printk(KERN_ERR - "ar71xx: invalid PHY interface mode for GE%u\n", id); - return; - } - - switch (ar71xx_soc) { - case AR71XX_SOC_AR7130: - if (id == 0) { - pdata->ddr_flush = ar71xx_ddr_flush_ge0; - pdata->set_speed = ar71xx_set_speed_ge0; - } else { - pdata->ddr_flush = ar71xx_ddr_flush_ge1; - pdata->set_speed = ar71xx_set_speed_ge1; - } - break; - - case AR71XX_SOC_AR7141: - case AR71XX_SOC_AR7161: - if (id == 0) { - pdata->ddr_flush = ar71xx_ddr_flush_ge0; - pdata->set_speed = ar71xx_set_speed_ge0; - } else { - pdata->ddr_flush = ar71xx_ddr_flush_ge1; - pdata->set_speed = ar71xx_set_speed_ge1; - } - pdata->has_gbit = 1; - break; - - case AR71XX_SOC_AR7242: - if (id == 0) { - pdata->reset_bit |= AR724X_RESET_GE0_MDIO | - RESET_MODULE_GE0_PHY; - pdata->ddr_flush = ar724x_ddr_flush_ge0; - pdata->set_speed = ar7242_set_speed_ge0; - } else { - pdata->reset_bit |= AR724X_RESET_GE1_MDIO | - RESET_MODULE_GE1_PHY; - pdata->ddr_flush = ar724x_ddr_flush_ge1; - pdata->set_speed = ar724x_set_speed_ge1; - } - pdata->has_gbit = 1; - pdata->is_ar724x = 1; - - if (!pdata->fifo_cfg1) - pdata->fifo_cfg1 = 0x0010ffff; - if (!pdata->fifo_cfg2) - pdata->fifo_cfg2 = 0x015500aa; - if (!pdata->fifo_cfg3) - pdata->fifo_cfg3 = 0x01f00140; - break; - - case AR71XX_SOC_AR7241: - if (id == 0) - pdata->reset_bit |= AR724X_RESET_GE0_MDIO; - else - pdata->reset_bit |= AR724X_RESET_GE1_MDIO; - /* fall through */ - case AR71XX_SOC_AR7240: - if (id == 0) { - pdata->reset_bit |= RESET_MODULE_GE0_PHY; - pdata->ddr_flush = ar724x_ddr_flush_ge0; - pdata->set_speed = ar724x_set_speed_ge0; - - pdata->phy_mask = BIT(4); - } else { - pdata->reset_bit |= RESET_MODULE_GE1_PHY; - pdata->ddr_flush = ar724x_ddr_flush_ge1; - pdata->set_speed = ar724x_set_speed_ge1; - - pdata->speed = SPEED_1000; - pdata->duplex = DUPLEX_FULL; - pdata->switch_data = &ar71xx_switch_data; - } - pdata->has_gbit = 1; - pdata->is_ar724x = 1; - if (ar71xx_soc == AR71XX_SOC_AR7240) - pdata->is_ar7240 = 1; - - if (!pdata->fifo_cfg1) - pdata->fifo_cfg1 = 0x0010ffff; - if (!pdata->fifo_cfg2) - pdata->fifo_cfg2 = 0x015500aa; - if (!pdata->fifo_cfg3) - pdata->fifo_cfg3 = 0x01f00140; - break; - - case AR71XX_SOC_AR9130: - if (id == 0) { - pdata->ddr_flush = ar91xx_ddr_flush_ge0; - pdata->set_speed = ar91xx_set_speed_ge0; - } else { - pdata->ddr_flush = ar91xx_ddr_flush_ge1; - pdata->set_speed = ar91xx_set_speed_ge1; - } - pdata->is_ar91xx = 1; - break; - - case AR71XX_SOC_AR9132: - if (id == 0) { - pdata->ddr_flush = ar91xx_ddr_flush_ge0; - pdata->set_speed = ar91xx_set_speed_ge0; - } else { - pdata->ddr_flush = ar91xx_ddr_flush_ge1; - pdata->set_speed = ar91xx_set_speed_ge1; - } - pdata->is_ar91xx = 1; - pdata->has_gbit = 1; - break; - - case AR71XX_SOC_AR9330: - case AR71XX_SOC_AR9331: - if (id == 0) { - pdata->reset_bit = AR933X_RESET_GE0_MAC | - AR933X_RESET_GE0_MDIO; - pdata->ddr_flush = ar933x_ddr_flush_ge0; - pdata->set_speed = ar933x_set_speed_ge0; - - pdata->phy_mask = BIT(4); - } else { - pdata->reset_bit = AR933X_RESET_GE1_MAC | - AR933X_RESET_GE1_MDIO; - pdata->ddr_flush = ar933x_ddr_flush_ge1; - pdata->set_speed = ar933x_set_speed_ge1; - - pdata->speed = SPEED_1000; - pdata->duplex = DUPLEX_FULL; - pdata->switch_data = &ar71xx_switch_data; - } - - pdata->has_gbit = 1; - pdata->is_ar724x = 1; - - if (!pdata->fifo_cfg1) - pdata->fifo_cfg1 = 0x0010ffff; - if (!pdata->fifo_cfg2) - pdata->fifo_cfg2 = 0x015500aa; - if (!pdata->fifo_cfg3) - pdata->fifo_cfg3 = 0x01f00140; - break; - - case AR71XX_SOC_AR9341: - case AR71XX_SOC_AR9342: - case AR71XX_SOC_AR9344: - if (id == 0) { - pdata->reset_bit = AR934X_RESET_GE0_MAC | - AR934X_RESET_GE0_MDIO; - pdata->ddr_flush =ar934x_ddr_flush_ge0; - pdata->set_speed = ar934x_set_speed_ge0; - } else { - pdata->reset_bit = AR934X_RESET_GE1_MAC | - AR934X_RESET_GE1_MDIO; - pdata->ddr_flush = ar934x_ddr_flush_ge1; - pdata->set_speed = ar934x_set_speed_ge1; - - pdata->switch_data = &ar71xx_switch_data; - } - - pdata->has_gbit = 1; - pdata->is_ar724x = 1; - - if (!pdata->fifo_cfg1) - pdata->fifo_cfg1 = 0x0010ffff; - if (!pdata->fifo_cfg2) - pdata->fifo_cfg2 = 0x015500aa; - if (!pdata->fifo_cfg3) - pdata->fifo_cfg3 = 0x01f00140; - break; - - default: - BUG(); - } - - switch (pdata->phy_if_mode) { - case PHY_INTERFACE_MODE_GMII: - case PHY_INTERFACE_MODE_RGMII: - if (!pdata->has_gbit) { - printk(KERN_ERR "ar71xx: no gbit available on eth%d\n", - id); - return; - } - /* fallthrough */ - default: - break; - } - - if (!is_valid_ether_addr(pdata->mac_addr)) { - random_ether_addr(pdata->mac_addr); - printk(KERN_DEBUG - "ar71xx: using random MAC address for eth%d\n", - ar71xx_eth_instance); - } - - if (pdata->mii_bus_dev == NULL) { - switch (ar71xx_soc) { - case AR71XX_SOC_AR9341: - case AR71XX_SOC_AR9342: - case AR71XX_SOC_AR9344: - if (id == 0) - pdata->mii_bus_dev = &ar71xx_mdio0_device.dev; - else - pdata->mii_bus_dev = &ar71xx_mdio1_device.dev; - break; - - case AR71XX_SOC_AR7241: - case AR71XX_SOC_AR9330: - case AR71XX_SOC_AR9331: - pdata->mii_bus_dev = &ar71xx_mdio1_device.dev; - break; - - default: - pdata->mii_bus_dev = &ar71xx_mdio0_device.dev; - break; - } - } - - /* Reset the device */ - ar71xx_device_stop(pdata->reset_bit); - mdelay(100); - - ar71xx_device_start(pdata->reset_bit); - mdelay(100); - - platform_device_register(pdev); - ar71xx_eth_instance++; -} - -static struct resource ar71xx_spi_resources[] = { - [0] = { - .start = AR71XX_SPI_BASE, - .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device ar71xx_spi_device = { - .name = "ar71xx-spi", - .id = -1, - .resource = ar71xx_spi_resources, - .num_resources = ARRAY_SIZE(ar71xx_spi_resources), -}; - -void __init ar71xx_add_device_spi(struct ar71xx_spi_platform_data *pdata, - struct spi_board_info const *info, - unsigned n) -{ - spi_register_board_info(info, n); - ar71xx_spi_device.dev.platform_data = pdata; - platform_device_register(&ar71xx_spi_device); -} - -void __init ar71xx_add_device_wdt(void) -{ - platform_device_register_simple("ar71xx-wdt", -1, NULL, 0); -} - -void __init ar71xx_set_mac_base(unsigned char *mac) -{ - memcpy(ar71xx_mac_base, mac, ETH_ALEN); -} - -void __init ar71xx_parse_mac_addr(char *mac_str) -{ - u8 tmp[ETH_ALEN]; - int t; - - t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", - &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]); - - if (t != ETH_ALEN) - t = sscanf(mac_str, "%02hhx.%02hhx.%02hhx.%02hhx.%02hhx.%02hhx", - &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]); - - if (t == ETH_ALEN) - ar71xx_set_mac_base(tmp); - else - printk(KERN_DEBUG "ar71xx: failed to parse mac address " - "\"%s\"\n", mac_str); -} - -static int __init ar71xx_ethaddr_setup(char *str) -{ - ar71xx_parse_mac_addr(str); - return 1; -} -__setup("ethaddr=", ar71xx_ethaddr_setup); - -static int __init ar71xx_kmac_setup(char *str) -{ - ar71xx_parse_mac_addr(str); - return 1; -} -__setup("kmac=", ar71xx_kmac_setup); - -void __init ar71xx_init_mac(unsigned char *dst, const unsigned char *src, - int offset) -{ - int t; - - if (!is_valid_ether_addr(src)) { - memset(dst, '\0', ETH_ALEN); - return; - } - - t = (((u32) src[3]) << 16) + (((u32) src[4]) << 8) + ((u32) src[5]); - t += offset; - - dst[0] = src[0]; - dst[1] = src[1]; - dst[2] = src[2]; - dst[3] = (t >> 16) & 0xff; - dst[4] = (t >> 8) & 0xff; - dst[5] = t & 0xff; -} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/devices.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/devices.h deleted file mode 100644 index 0f75fe7d83..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/devices.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Atheros AR71xx SoC device definitions - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __AR71XX_DEVICES_H -#define __AR71XX_DEVICES_H - -#include - -struct platform_device; - -void ar71xx_add_device_spi(struct ar71xx_spi_platform_data *pdata, - struct spi_board_info const *info, - unsigned n) __init; - -extern unsigned char ar71xx_mac_base[] __initdata; -void ar71xx_parse_mac_addr(char *mac_str) __init; -void ar71xx_init_mac(unsigned char *dst, const unsigned char *src, - int offset) __init; - -struct ar71xx_eth_pll_data { - u32 pll_10; - u32 pll_100; - u32 pll_1000; -}; - -extern struct ar71xx_eth_pll_data ar71xx_eth0_pll_data; -extern struct ar71xx_eth_pll_data ar71xx_eth1_pll_data; - -extern struct ag71xx_platform_data ar71xx_eth0_data; -extern struct ag71xx_platform_data ar71xx_eth1_data; -extern struct platform_device ar71xx_eth0_device; -extern struct platform_device ar71xx_eth1_device; -void ar71xx_add_device_eth(unsigned int id) __init; - -extern struct ag71xx_switch_platform_data ar71xx_switch_data; - -extern struct platform_device ar71xx_mdio0_device; -extern struct platform_device ar71xx_mdio1_device; -void ar71xx_add_device_mdio(unsigned int id, u32 phy_mask) __init; - -void ar71xx_add_device_uart(void) __init; - -void ar71xx_add_device_wdt(void) __init; - -#endif /* __AR71XX_DEVICES_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/early_printk.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/early_printk.c deleted file mode 100644 index c85a04d2c1..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/early_printk.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Atheros AR7xxx/AR9xxx SoC early printk support - * - * Copyright (C) 2008-2011 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include - -#include -#include - -static void (*_prom_putchar) (unsigned char); - -static inline void prom_putchar_wait(void __iomem *reg, u32 mask, u32 val) -{ - u32 t; - - do { - t = __raw_readl(reg); - if ((t & mask) == val) - break; - } while (1); -} - -static void prom_putchar_ar71xx(unsigned char ch) -{ - void __iomem *base = (void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE)); - - prom_putchar_wait(base + UART_LSR * 4, UART_LSR_THRE, UART_LSR_THRE); - __raw_writel(ch, base + UART_TX * 4); - prom_putchar_wait(base + UART_LSR * 4, UART_LSR_THRE, UART_LSR_THRE); -} - -static void prom_putchar_ar933x(unsigned char ch) -{ - void __iomem *base = (void __iomem *)(KSEG1ADDR(AR933X_UART_BASE)); - - prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR, - AR933X_UART_DATA_TX_CSR); - __raw_writel(AR933X_UART_DATA_TX_CSR | ch, base + AR933X_UART_DATA_REG); - prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR, - AR933X_UART_DATA_TX_CSR); -} - -static void prom_putchar_dummy(unsigned char ch) -{ - /* nothing to do */ -} - -static void prom_putchar_init(void) -{ - void __iomem *base; - u32 id; - - base = (void __iomem *)(KSEG1ADDR(AR71XX_RESET_BASE)); - id = __raw_readl(base + AR71XX_RESET_REG_REV_ID); - id &= REV_ID_MAJOR_MASK; - - switch (id) { - case REV_ID_MAJOR_AR71XX: - case REV_ID_MAJOR_AR7240: - case REV_ID_MAJOR_AR7241: - case REV_ID_MAJOR_AR7242: - case REV_ID_MAJOR_AR913X: - case REV_ID_MAJOR_AR9341: - case REV_ID_MAJOR_AR9342: - case REV_ID_MAJOR_AR9344: - _prom_putchar = prom_putchar_ar71xx; - break; - - case REV_ID_MAJOR_AR9330: - case REV_ID_MAJOR_AR9331: - _prom_putchar = prom_putchar_ar933x; - break; - - default: - _prom_putchar = prom_putchar_dummy; - break; - } -} - -void prom_putchar(unsigned char ch) -{ - if (!_prom_putchar) - prom_putchar_init(); - - _prom_putchar(ch); -} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/gpio.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/gpio.c deleted file mode 100644 index 91c838345d..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/gpio.c +++ /dev/null @@ -1,302 +0,0 @@ -/* - * Atheros AR7XXX/AR9XXX SoC GPIO API support - * - * Copyright (C) 2008-2011 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -static DEFINE_SPINLOCK(ar71xx_gpio_lock); - -unsigned long ar71xx_gpio_count; -EXPORT_SYMBOL(ar71xx_gpio_count); - -void __ar71xx_gpio_set_value(unsigned gpio, int value) -{ - void __iomem *base = ar71xx_gpio_base; - - if (value) - __raw_writel(1 << gpio, base + AR71XX_GPIO_REG_SET); - else - __raw_writel(1 << gpio, base + AR71XX_GPIO_REG_CLEAR); -} -EXPORT_SYMBOL(__ar71xx_gpio_set_value); - -int __ar71xx_gpio_get_value(unsigned gpio) -{ - return (__raw_readl(ar71xx_gpio_base + AR71XX_GPIO_REG_IN) >> gpio) & 1; -} -EXPORT_SYMBOL(__ar71xx_gpio_get_value); - -static int ar71xx_gpio_get_value(struct gpio_chip *chip, unsigned offset) -{ - return __ar71xx_gpio_get_value(offset); -} - -static void ar71xx_gpio_set_value(struct gpio_chip *chip, - unsigned offset, int value) -{ - __ar71xx_gpio_set_value(offset, value); -} - -static int ar71xx_gpio_direction_input(struct gpio_chip *chip, - unsigned offset) -{ - void __iomem *base = ar71xx_gpio_base; - unsigned long flags; - - spin_lock_irqsave(&ar71xx_gpio_lock, flags); - - __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << offset), - base + AR71XX_GPIO_REG_OE); - - spin_unlock_irqrestore(&ar71xx_gpio_lock, flags); - - return 0; -} - -static int ar71xx_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - void __iomem *base = ar71xx_gpio_base; - unsigned long flags; - - spin_lock_irqsave(&ar71xx_gpio_lock, flags); - - if (value) - __raw_writel(1 << offset, base + AR71XX_GPIO_REG_SET); - else - __raw_writel(1 << offset, base + AR71XX_GPIO_REG_CLEAR); - - __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) | (1 << offset), - base + AR71XX_GPIO_REG_OE); - - spin_unlock_irqrestore(&ar71xx_gpio_lock, flags); - - return 0; -} - -static int ar934x_gpio_direction_input(struct gpio_chip *chip, - unsigned offset) -{ - void __iomem *base = ar71xx_gpio_base; - unsigned long flags; - - spin_lock_irqsave(&ar71xx_gpio_lock, flags); - - __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) | (1 << offset), - base + AR71XX_GPIO_REG_OE); - - spin_unlock_irqrestore(&ar71xx_gpio_lock, flags); - - return 0; -} - -static int ar934x_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - void __iomem *base = ar71xx_gpio_base; - unsigned long flags; - - spin_lock_irqsave(&ar71xx_gpio_lock, flags); - - if (value) - __raw_writel(1 << offset, base + AR71XX_GPIO_REG_SET); - else - __raw_writel(1 << offset, base + AR71XX_GPIO_REG_CLEAR); - - __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << offset), - base + AR71XX_GPIO_REG_OE); - - spin_unlock_irqrestore(&ar71xx_gpio_lock, flags); - - return 0; -} - -static struct gpio_chip ar71xx_gpio_chip = { - .label = "ar71xx", - .get = ar71xx_gpio_get_value, - .set = ar71xx_gpio_set_value, - .direction_input = ar71xx_gpio_direction_input, - .direction_output = ar71xx_gpio_direction_output, - .base = 0, - .ngpio = AR71XX_GPIO_COUNT, -}; - -void ar71xx_gpio_function_enable(u32 mask) -{ - void __iomem *base = ar71xx_gpio_base; - unsigned long flags; - unsigned int reg; - - if (ar71xx_soc == AR71XX_SOC_AR9341 || - ar71xx_soc == AR71XX_SOC_AR9342 || - ar71xx_soc == AR71XX_SOC_AR9344) { - reg = AR934X_GPIO_REG_FUNC; - } else { - reg = AR71XX_GPIO_REG_FUNC; - } - - spin_lock_irqsave(&ar71xx_gpio_lock, flags); - - __raw_writel(__raw_readl(base + reg) | mask, base + reg); - /* flush write */ - (void) __raw_readl(base + reg); - - spin_unlock_irqrestore(&ar71xx_gpio_lock, flags); -} - -void ar71xx_gpio_function_disable(u32 mask) -{ - void __iomem *base = ar71xx_gpio_base; - unsigned long flags; - unsigned int reg; - - if (ar71xx_soc == AR71XX_SOC_AR9341 || - ar71xx_soc == AR71XX_SOC_AR9342 || - ar71xx_soc == AR71XX_SOC_AR9344) { - reg = AR934X_GPIO_REG_FUNC; - } else { - reg = AR71XX_GPIO_REG_FUNC; - } - - spin_lock_irqsave(&ar71xx_gpio_lock, flags); - - __raw_writel(__raw_readl(base + reg) & ~mask, base + reg); - /* flush write */ - (void) __raw_readl(base + reg); - - spin_unlock_irqrestore(&ar71xx_gpio_lock, flags); -} - -void ar71xx_gpio_function_setup(u32 set, u32 clear) -{ - void __iomem *base = ar71xx_gpio_base; - unsigned long flags; - unsigned int reg; - - if (ar71xx_soc == AR71XX_SOC_AR9341 || - ar71xx_soc == AR71XX_SOC_AR9342 || - ar71xx_soc == AR71XX_SOC_AR9344) { - reg = AR934X_GPIO_REG_FUNC; - } else { - reg = AR71XX_GPIO_REG_FUNC; - } - - spin_lock_irqsave(&ar71xx_gpio_lock, flags); - - __raw_writel((__raw_readl(base + reg) & ~clear) | set, base + reg); - /* flush write */ - (void) __raw_readl(base + reg); - - spin_unlock_irqrestore(&ar71xx_gpio_lock, flags); -} -EXPORT_SYMBOL(ar71xx_gpio_function_setup); - -void __init ar71xx_gpio_output_select(unsigned gpio, u8 val) -{ - void __iomem *base = ar71xx_gpio_base; - unsigned long flags; - unsigned int reg; - u32 t, s; - - if (ar71xx_soc != AR71XX_SOC_AR9341 && - ar71xx_soc != AR71XX_SOC_AR9342 && - ar71xx_soc != AR71XX_SOC_AR9344) - return; - - if (gpio >= AR934X_GPIO_COUNT) - return; - - reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4); - s = 8 * (gpio % 4); - - spin_lock_irqsave(&ar71xx_gpio_lock, flags); - - t = __raw_readl(base + reg); - t &= ~(0xff << s); - t |= val << s; - __raw_writel(t, base + reg); - - /* flush write */ - (void) __raw_readl(base + reg); - - spin_unlock_irqrestore(&ar71xx_gpio_lock, flags); -} - -void __init ar71xx_gpio_init(void) -{ - int err; - - if (!request_mem_region(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE, - "AR71xx GPIO controller")) - panic("cannot allocate AR71xx GPIO registers page"); - - switch (ar71xx_soc) { - case AR71XX_SOC_AR7130: - case AR71XX_SOC_AR7141: - case AR71XX_SOC_AR7161: - ar71xx_gpio_chip.ngpio = AR71XX_GPIO_COUNT; - break; - - case AR71XX_SOC_AR7240: - ar71xx_gpio_chip.ngpio = AR7240_GPIO_COUNT; - break; - - case AR71XX_SOC_AR7241: - case AR71XX_SOC_AR7242: - ar71xx_gpio_chip.ngpio = AR7241_GPIO_COUNT; - break; - - case AR71XX_SOC_AR9130: - case AR71XX_SOC_AR9132: - ar71xx_gpio_chip.ngpio = AR91XX_GPIO_COUNT; - break; - - case AR71XX_SOC_AR9330: - case AR71XX_SOC_AR9331: - ar71xx_gpio_chip.ngpio = AR933X_GPIO_COUNT; - break; - - case AR71XX_SOC_AR9341: - case AR71XX_SOC_AR9342: - case AR71XX_SOC_AR9344: - ar71xx_gpio_chip.ngpio = AR934X_GPIO_COUNT; - ar71xx_gpio_chip.direction_input = ar934x_gpio_direction_input; - ar71xx_gpio_chip.direction_output = ar934x_gpio_direction_output; - break; - - default: - BUG(); - } - - err = gpiochip_add(&ar71xx_gpio_chip); - if (err) - panic("cannot add AR71xx GPIO chip, error=%d", err); -} - -int gpio_to_irq(unsigned gpio) -{ - return AR71XX_GPIO_IRQ(gpio); -} -EXPORT_SYMBOL(gpio_to_irq); - -int irq_to_gpio(unsigned irq) -{ - return irq - AR71XX_GPIO_IRQ_BASE; -} -EXPORT_SYMBOL(irq_to_gpio); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/irq.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/irq.c deleted file mode 100644 index 6d744daefa..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/irq.c +++ /dev/null @@ -1,416 +0,0 @@ -/* - * Atheros AR71xx SoC specific interrupt handling - * - * Copyright (C) 2010-2011 Jaiganesh Narayanan - * Copyright (C) 2008-2010 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Parts of this file are based on Atheros 2.6.15 BSP - * Parts of this file are based on Atheros 2.6.31 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include - -#include -#include - -#include - -static void ar71xx_gpio_irq_dispatch(void) -{ - void __iomem *base = ar71xx_gpio_base; - u32 pending; - - pending = __raw_readl(base + AR71XX_GPIO_REG_INT_PENDING) & - __raw_readl(base + AR71XX_GPIO_REG_INT_ENABLE); - - if (pending) - do_IRQ(AR71XX_GPIO_IRQ_BASE + fls(pending) - 1); - else - spurious_interrupt(); -} - -static void ar71xx_gpio_irq_unmask(struct irq_data *d) -{ - unsigned int irq = d->irq - AR71XX_GPIO_IRQ_BASE; - void __iomem *base = ar71xx_gpio_base; - u32 t; - - t = __raw_readl(base + AR71XX_GPIO_REG_INT_ENABLE); - __raw_writel(t | (1 << irq), base + AR71XX_GPIO_REG_INT_ENABLE); - - /* flush write */ - (void) __raw_readl(base + AR71XX_GPIO_REG_INT_ENABLE); -} - -static void ar71xx_gpio_irq_mask(struct irq_data *d) -{ - unsigned int irq = d->irq - AR71XX_GPIO_IRQ_BASE; - void __iomem *base = ar71xx_gpio_base; - u32 t; - - t = __raw_readl(base + AR71XX_GPIO_REG_INT_ENABLE); - __raw_writel(t & ~(1 << irq), base + AR71XX_GPIO_REG_INT_ENABLE); - - /* flush write */ - (void) __raw_readl(base + AR71XX_GPIO_REG_INT_ENABLE); -} - -static struct irq_chip ar71xx_gpio_irq_chip = { - .name = "AR71XX GPIO", - .irq_unmask = ar71xx_gpio_irq_unmask, - .irq_mask = ar71xx_gpio_irq_mask, - .irq_mask_ack = ar71xx_gpio_irq_mask, -}; - -static struct irqaction ar71xx_gpio_irqaction = { - .handler = no_action, - .name = "cascade [AR71XX GPIO]", -}; - -#define GPIO_INT_ALL 0xffff - -static void __init ar71xx_gpio_irq_init(void) -{ - void __iomem *base = ar71xx_gpio_base; - int i; - - __raw_writel(0, base + AR71XX_GPIO_REG_INT_ENABLE); - __raw_writel(0, base + AR71XX_GPIO_REG_INT_PENDING); - - /* setup type of all GPIO interrupts to level sensitive */ - __raw_writel(GPIO_INT_ALL, base + AR71XX_GPIO_REG_INT_TYPE); - - /* setup polarity of all GPIO interrupts to active high */ - __raw_writel(GPIO_INT_ALL, base + AR71XX_GPIO_REG_INT_POLARITY); - - for (i = AR71XX_GPIO_IRQ_BASE; - i < AR71XX_GPIO_IRQ_BASE + AR71XX_GPIO_IRQ_COUNT; i++) - irq_set_chip_and_handler(i, &ar71xx_gpio_irq_chip, - handle_level_irq); - - setup_irq(AR71XX_MISC_IRQ_GPIO, &ar71xx_gpio_irqaction); -} - -static void ar71xx_misc_irq_dispatch(void) -{ - u32 pending; - - pending = ar71xx_reset_rr(AR71XX_RESET_REG_MISC_INT_STATUS) - & ar71xx_reset_rr(AR71XX_RESET_REG_MISC_INT_ENABLE); - - if (pending & MISC_INT_UART) - do_IRQ(AR71XX_MISC_IRQ_UART); - - else if (pending & MISC_INT_DMA) - do_IRQ(AR71XX_MISC_IRQ_DMA); - - else if (pending & MISC_INT_PERFC) - do_IRQ(AR71XX_MISC_IRQ_PERFC); - - else if (pending & MISC_INT_TIMER) - do_IRQ(AR71XX_MISC_IRQ_TIMER); - - else if (pending & MISC_INT_OHCI) - do_IRQ(AR71XX_MISC_IRQ_OHCI); - - else if (pending & MISC_INT_ERROR) - do_IRQ(AR71XX_MISC_IRQ_ERROR); - - else if (pending & MISC_INT_GPIO) - ar71xx_gpio_irq_dispatch(); - - else if (pending & MISC_INT_WDOG) - do_IRQ(AR71XX_MISC_IRQ_WDOG); - - else if (pending & MISC_INT_TIMER2) - do_IRQ(AR71XX_MISC_IRQ_TIMER2); - - else if (pending & MISC_INT_TIMER3) - do_IRQ(AR71XX_MISC_IRQ_TIMER3); - - else if (pending & MISC_INT_TIMER4) - do_IRQ(AR71XX_MISC_IRQ_TIMER4); - - else if (pending & MISC_INT_DDR_PERF) - do_IRQ(AR71XX_MISC_IRQ_DDR_PERF); - - else if (pending & MISC_INT_ENET_LINK) - do_IRQ(AR71XX_MISC_IRQ_ENET_LINK); - - else - spurious_interrupt(); -} - -static void ar71xx_misc_irq_unmask(struct irq_data *d) -{ - unsigned int irq = d->irq - AR71XX_MISC_IRQ_BASE; - void __iomem *base = ar71xx_reset_base; - u32 t; - - t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE); - __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_MISC_INT_ENABLE); - - /* flush write */ - (void) __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE); -} - -static void ar71xx_misc_irq_mask(struct irq_data *d) -{ - unsigned int irq = d->irq - AR71XX_MISC_IRQ_BASE; - void __iomem *base = ar71xx_reset_base; - u32 t; - - t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE); - __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_MISC_INT_ENABLE); - - /* flush write */ - (void) __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE); -} - -static void ar724x_misc_irq_ack(struct irq_data *d) -{ - unsigned int irq = d->irq - AR71XX_MISC_IRQ_BASE; - void __iomem *base = ar71xx_reset_base; - u32 t; - - t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS); - __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_MISC_INT_STATUS); - - /* flush write */ - (void) __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS); -} - -static struct irq_chip ar71xx_misc_irq_chip = { - .name = "AR71XX MISC", - .irq_unmask = ar71xx_misc_irq_unmask, - .irq_mask = ar71xx_misc_irq_mask, -}; - -static struct irqaction ar71xx_misc_irqaction = { - .handler = no_action, - .name = "cascade [AR71XX MISC]", -}; - -static void __init ar71xx_misc_irq_init(void) -{ - void __iomem *base = ar71xx_reset_base; - int i; - - __raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_ENABLE); - __raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_STATUS); - - switch (ar71xx_soc) { - case AR71XX_SOC_AR7240: - case AR71XX_SOC_AR7241: - case AR71XX_SOC_AR7242: - case AR71XX_SOC_AR9330: - case AR71XX_SOC_AR9331: - case AR71XX_SOC_AR9341: - case AR71XX_SOC_AR9342: - case AR71XX_SOC_AR9344: - ar71xx_misc_irq_chip.irq_ack = ar724x_misc_irq_ack; - break; - default: - ar71xx_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask; - break; - } - - for (i = AR71XX_MISC_IRQ_BASE; - i < AR71XX_MISC_IRQ_BASE + AR71XX_MISC_IRQ_COUNT; i++) - irq_set_chip_and_handler(i, &ar71xx_misc_irq_chip, - handle_level_irq); - - setup_irq(AR71XX_CPU_IRQ_MISC, &ar71xx_misc_irqaction); -} - -static void ar934x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc) -{ - u32 status; - - disable_irq_nosync(irq); - - status = ar71xx_reset_rr(AR934X_RESET_REG_PCIE_WMAC_INT_STATUS); - - if (status & AR934X_PCIE_WMAC_INT_PCIE_ALL) { - ar71xx_ddr_flush(AR934X_DDR_REG_FLUSH_PCIE); - generic_handle_irq(AR934X_IP2_IRQ_PCIE); - } else if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) { - ar71xx_ddr_flush(AR934X_DDR_REG_FLUSH_WMAC); - generic_handle_irq(AR934X_IP2_IRQ_WMAC); - } else { - spurious_interrupt(); - } - - enable_irq(irq); -} - -static void ar934x_ip2_irq_init(void) -{ - int i; - - for (i = AR934X_IP2_IRQ_BASE; - i < AR934X_IP2_IRQ_BASE + AR934X_IP2_IRQ_COUNT; i++) - irq_set_chip_and_handler(i, &dummy_irq_chip, - handle_level_irq); - - irq_set_chained_handler(AR71XX_CPU_IRQ_IP2, ar934x_ip2_irq_dispatch); -} - - -/* - * The IP2/IP3 lines are tied to a PCI/WMAC/USB device. Drivers for - * these devices typically allocate coherent DMA memory, however the - * DMA controller may still have some unsynchronized data in the FIFO. - * Issue a flush in the handlers to ensure that the driver sees - * the update. - */ -static void ar71xx_ip2_handler(void) -{ - ar71xx_ddr_flush(AR71XX_DDR_REG_FLUSH_PCI); - do_IRQ(AR71XX_CPU_IRQ_IP2); -} - -static void ar724x_ip2_handler(void) -{ - ar71xx_ddr_flush(AR724X_DDR_REG_FLUSH_PCIE); - do_IRQ(AR71XX_CPU_IRQ_IP2); -} - -static void ar913x_ip2_handler(void) -{ - ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_WMAC); - do_IRQ(AR71XX_CPU_IRQ_IP2); -} - -static void ar933x_ip2_handler(void) -{ - ar71xx_ddr_flush(AR933X_DDR_REG_FLUSH_WMAC); - do_IRQ(AR71XX_CPU_IRQ_IP2); -} - -static void ar934x_ip2_handler(void) -{ - do_IRQ(AR71XX_CPU_IRQ_IP2); -} - -static void ar71xx_ip3_handler(void) -{ - ar71xx_ddr_flush(AR71XX_DDR_REG_FLUSH_USB); - do_IRQ(AR71XX_CPU_IRQ_USB); -} - -static void ar724x_ip3_handler(void) -{ - ar71xx_ddr_flush(AR724X_DDR_REG_FLUSH_USB); - do_IRQ(AR71XX_CPU_IRQ_USB); -} - -static void ar913x_ip3_handler(void) -{ - ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_USB); - do_IRQ(AR71XX_CPU_IRQ_USB); -} - -static void ar933x_ip3_handler(void) -{ - ar71xx_ddr_flush(AR933X_DDR_REG_FLUSH_USB); - do_IRQ(AR71XX_CPU_IRQ_USB); -} - -static void ar934x_ip3_handler(void) -{ - do_IRQ(AR71XX_CPU_IRQ_USB); -} - -static void (*ip2_handler)(void); -static void (*ip3_handler)(void); - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned long pending; - - pending = read_c0_status() & read_c0_cause() & ST0_IM; - - if (pending & STATUSF_IP7) - do_IRQ(AR71XX_CPU_IRQ_TIMER); - - else if (pending & STATUSF_IP2) - ip2_handler(); - - else if (pending & STATUSF_IP4) - do_IRQ(AR71XX_CPU_IRQ_GE0); - - else if (pending & STATUSF_IP5) - do_IRQ(AR71XX_CPU_IRQ_GE1); - - else if (pending & STATUSF_IP3) - ip3_handler(); - - else if (pending & STATUSF_IP6) - ar71xx_misc_irq_dispatch(); - - else - spurious_interrupt(); -} - -void __init arch_init_irq(void) -{ - switch (ar71xx_soc) { - case AR71XX_SOC_AR7130: - case AR71XX_SOC_AR7141: - case AR71XX_SOC_AR7161: - ip2_handler = ar71xx_ip2_handler; - ip3_handler = ar71xx_ip3_handler; - break; - - case AR71XX_SOC_AR7240: - case AR71XX_SOC_AR7241: - case AR71XX_SOC_AR7242: - ip2_handler = ar724x_ip2_handler; - ip3_handler = ar724x_ip3_handler; - break; - - case AR71XX_SOC_AR9130: - case AR71XX_SOC_AR9132: - ip2_handler = ar913x_ip2_handler; - ip3_handler = ar913x_ip3_handler; - break; - - case AR71XX_SOC_AR9330: - case AR71XX_SOC_AR9331: - ip2_handler = ar933x_ip2_handler; - ip3_handler = ar933x_ip3_handler; - break; - - case AR71XX_SOC_AR9341: - case AR71XX_SOC_AR9342: - case AR71XX_SOC_AR9344: - ip2_handler = ar934x_ip2_handler; - ip3_handler = ar934x_ip3_handler; - break; - - default: - BUG(); - } - - mips_cpu_irq_init(); - - ar71xx_misc_irq_init(); - - if (ar71xx_soc == AR71XX_SOC_AR9341 || - ar71xx_soc == AR71XX_SOC_AR9342 || - ar71xx_soc == AR71XX_SOC_AR9344) - ar934x_ip2_irq_init(); - - cp0_perfcount_irq = AR71XX_MISC_IRQ_PERFC; - - ar71xx_gpio_irq_init(); -} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-alfa-ap96.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-alfa-ap96.c deleted file mode 100644 index f22db50a55..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-alfa-ap96.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * ALFA Network AP96 board support - * - * Copyright (C) 2012 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-pb42-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-usb.h" - -#define ALFA_AP96_GPIO_MICROSD_CS 0 -#define ALFA_AP96_GPIO_RTC_CS 1 -#define ALFA_AP96_GPIO_PCIE_RESET 2 -#define ALFA_AP96_GPIO_SIM_DETECT 3 -#define ALFA_AP96_GPIO_MICROSD_CD 4 -#define ALFA_AP96_GPIO_PCIE_W_DISABLE 5 - -#define ALFA_AP96_GPIO_BUTTON_RESET 11 - -#define ALFA_AP96_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ALFA_AP96_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_AP96_KEYS_POLL_INTERVAL) - -static struct gpio_keys_button alfa_ap96_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ALFA_AP96_KEYS_DEBOUNCE_INTERVAL, - .gpio = ALFA_AP96_GPIO_BUTTON_RESET, - .active_low = 1, - } -}; - -static int alfa_ap96_mmc_get_cd(struct device *dev) -{ - return !gpio_get_value(ALFA_AP96_GPIO_MICROSD_CD); -} - -static struct mmc_spi_platform_data alfa_ap96_mmc_data = { - .get_cd = alfa_ap96_mmc_get_cd, - .caps = MMC_CAP_NEEDS_POLL, - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, -}; - -static struct spi_board_info alfa_ap96_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p80", - }, { - .bus_num = 0, - .chip_select = 1, - .max_speed_hz = 25000000, - .modalias = "mmc_spi", - .platform_data = &alfa_ap96_mmc_data, - .controller_data = (void *) ALFA_AP96_GPIO_MICROSD_CS, - }, { - .bus_num = 0, - .chip_select = 2, - .max_speed_hz = 6250000, - .modalias = "rtc-pcf2123", - .controller_data = (void *) ALFA_AP96_GPIO_RTC_CS, - }, -}; - -static struct resource alfa_ap96_spi_resources[] = { - [0] = { - .start = AR71XX_SPI_BASE, - .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct ar71xx_spi_platform_data alfa_ap96_spi_data = { - .bus_num = 0, - .num_chipselect = 3, -}; - -static struct platform_device alfa_ap96_spi_device = { - .name = "pb44-spi", - .id = -1, - .resource = alfa_ap96_spi_resources, - .num_resources = ARRAY_SIZE(alfa_ap96_spi_resources), - .dev = { - .platform_data = &alfa_ap96_spi_data, - }, -}; - -static void __init alfa_ap96_gpio_setup(void) -{ - ar71xx_gpio_function_disable(AR71XX_GPIO_FUNC_SPI_CS1_EN | - AR71XX_GPIO_FUNC_SPI_CS2_EN); - - gpio_request(ALFA_AP96_GPIO_MICROSD_CD, "microSD CD"); - gpio_direction_input(ALFA_AP96_GPIO_MICROSD_CD); - gpio_request(ALFA_AP96_GPIO_PCIE_RESET, "PCIe reset"); - gpio_direction_output(ALFA_AP96_GPIO_PCIE_RESET, 1); - gpio_request(ALFA_AP96_GPIO_PCIE_W_DISABLE, "PCIe write disable"); - gpio_direction_output(ALFA_AP96_GPIO_PCIE_W_DISABLE, 1); -} - -#define ALFA_AP96_WAN_PHYMASK BIT(4) -#define ALFA_AP96_LAN_PHYMASK BIT(5) -#define ALFA_AP96_MDIO_PHYMASK (ALFA_AP96_LAN_PHYMASK | ALFA_AP96_WAN_PHYMASK) - -static void __init alfa_ap96_init(void) -{ - alfa_ap96_gpio_setup(); - - ar71xx_add_device_mdio(0, ~ALFA_AP96_MDIO_PHYMASK); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.phy_mask = ALFA_AP96_WAN_PHYMASK; - ar71xx_eth1_pll_data.pll_1000 = 0x110000; - - ar71xx_add_device_eth(0); - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth1_data.phy_mask = ALFA_AP96_LAN_PHYMASK; - ar71xx_eth1_pll_data.pll_1000 = 0x110000; - - ar71xx_add_device_eth(1); - - pb42_pci_init(); - - spi_register_board_info(alfa_ap96_spi_info, - ARRAY_SIZE(alfa_ap96_spi_info)); - platform_device_register(&alfa_ap96_spi_device); - - ar71xx_register_gpio_keys_polled(-1, ALFA_AP96_KEYS_POLL_INTERVAL, - ARRAY_SIZE(alfa_ap96_gpio_keys), - alfa_ap96_gpio_keys); - ar71xx_add_device_usb(); -} - -MIPS_MACHINE(AR71XX_MACH_ALFA_AP96, "ALFA-AP96", "ALFA Network AP96", - alfa_ap96_init); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-alfa-nx.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-alfa-nx.c deleted file mode 100644 index 6e28080a8e..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-alfa-nx.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * ALFA Network N2/N5 board support - * - * Copyright (C) 2011 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ap91-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" - -#define ALFA_NX_GPIO_LED_2 17 -#define ALFA_NX_GPIO_LED_3 16 -#define ALFA_NX_GPIO_LED_5 12 -#define ALFA_NX_GPIO_LED_6 8 -#define ALFA_NX_GPIO_LED_7 6 -#define ALFA_NX_GPIO_LED_8 7 - -#define ALFA_NX_GPIO_BTN_RESET 11 - -#define ALFA_NX_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ALFA_NX_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_NX_KEYS_POLL_INTERVAL) - -#define ALFA_NX_MAC0_OFFSET 0 -#define ALFA_NX_MAC1_OFFSET 6 -#define ALFA_NX_CALDATA_OFFSET 0x1000 - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition alfa_nx_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x040000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "rootfs", - .offset = 0x050000, - .size = 0x600000, - }, { - .name = "kernel", - .offset = 0x650000, - .size = 0x190000, - }, { - .name = "nvram", - .offset = 0x7e0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "art", - .offset = 0x7f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x050000, - .size = 0x780000, - } -}; -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data alfa_nx_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = alfa_nx_partitions, - .nr_parts = ARRAY_SIZE(alfa_nx_partitions), -#endif -}; - -static struct gpio_keys_button alfa_nx_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ALFA_NX_KEYS_DEBOUNCE_INTERVAL, - .gpio = ALFA_NX_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct gpio_led alfa_nx_leds_gpio[] __initdata = { - { - .name = "alfa:green:led_2", - .gpio = ALFA_NX_GPIO_LED_2, - .active_low = 1, - }, { - .name = "alfa:green:led_3", - .gpio = ALFA_NX_GPIO_LED_3, - .active_low = 1, - }, { - .name = "alfa:red:led_5", - .gpio = ALFA_NX_GPIO_LED_5, - .active_low = 1, - }, { - .name = "alfa:amber:led_6", - .gpio = ALFA_NX_GPIO_LED_6, - .active_low = 1, - }, { - .name = "alfa:green:led_7", - .gpio = ALFA_NX_GPIO_LED_7, - .active_low = 1, - }, { - .name = "alfa:green:led_8", - .gpio = ALFA_NX_GPIO_LED_8, - .active_low = 1, - } -}; - -static void __init alfa_nx_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ar71xx_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE, - AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ar71xx_add_device_m25p80(&alfa_nx_flash_data); - - ar71xx_add_device_leds_gpio(0, ARRAY_SIZE(alfa_nx_leds_gpio), - alfa_nx_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, ALFA_NX_KEYS_POLL_INTERVAL, - ARRAY_SIZE(alfa_nx_gpio_keys), - alfa_nx_gpio_keys); - - ar71xx_add_device_mdio(0, 0x0); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, - art + ALFA_NX_MAC0_OFFSET, 0); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, - art + ALFA_NX_MAC1_OFFSET, 0); - - /* WAN port */ - ar71xx_add_device_eth(0); - /* LAN port */ - ar71xx_add_device_eth(1); - - ap91_pci_init(art + ALFA_NX_CALDATA_OFFSET, NULL); -} - -MIPS_MACHINE(AR71XX_MACH_ALFA_NX, "ALFA-NX", "ALFA Network N2/N5", - alfa_nx_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-all0258n.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-all0258n.c deleted file mode 100644 index 18d0a93a97..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-all0258n.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - * Allnet ALL0258N support - * - * Copyright (C) 2011 Daniel Golle - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ap91-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" - -/* found via /sys/gpio/... try and error */ -#define ALL0258N_GPIO_BTN_RESET 1 -#define ALL0258N_GPIO_LED_RSSIHIGH 13 -#define ALL0258N_GPIO_LED_RSSIMEDIUM 15 -#define ALL0258N_GPIO_LED_RSSILOW 14 - -/* defaults taken from others machs */ -#define ALL0258N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ALL0258N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0258N_KEYS_POLL_INTERVAL) - -/* showed up in the original firmware's bootlog */ -#define ALL0258N_SEC_PHYMASK BIT(3) - -/* - * from U-Boot bootargs of original firmware: - * mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),320k(custom),1024k(kernel),4928k(rootfs),1536k(failsafe),64k(ART) - * we use a more OpenWrt-friendly layout now: - * mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),896k(kernel),5376k(rootfs),1536k(failsafe),64k(ART) - */ -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition all0258n_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x040000, - .size = 0x010000, - }, { - .name = "kernel", - .offset = 0x050000, - .size = 0x0E0000, - }, { - .name = "rootfs", - .offset = 0x130000, - .size = 0x540000, - }, { - .name = "failsafe", - .offset = 0x670000, - .size = 0x180000, - }, { - .name = "firmware", - .offset = 0x050000, - .size = 0x620000, - }, { - .name = "art", - .offset = 0x7F0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - } -}; -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data all0258n_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = all0258n_partitions, - .nr_parts = ARRAY_SIZE(all0258n_partitions), -#endif -}; - -static struct gpio_led all0258n_leds_gpio[] __initdata = { - { - .name = "all0258n:green:rssihigh", - .gpio = ALL0258N_GPIO_LED_RSSIHIGH, - .active_low = 1, - }, { - .name = "all0258n:yellow:rssimedium", - .gpio = ALL0258N_GPIO_LED_RSSIMEDIUM, - .active_low = 1, - }, { - .name = "all0258n:red:rssilow", - .gpio = ALL0258N_GPIO_LED_RSSILOW, - .active_low = 1, - } -}; - -static struct gpio_keys_button all0258n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ALL0258N_KEYS_DEBOUNCE_INTERVAL, - .gpio = ALL0258N_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init all0258n_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f7f0000); - u8 *ee = (u8 *) KSEG1ADDR(0x1f7f1000); - - ar71xx_add_device_m25p80(&all0258n_flash_data); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(all0258n_leds_gpio), - all0258n_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, ALL0258N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(all0258n_gpio_keys), - all0258n_gpio_keys); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 0); - - ar71xx_eth1_data.phy_mask = ALL0258N_SEC_PHYMASK; - - ar71xx_add_device_mdio(0, 0x0); - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ap91_pci_init(ee, mac); -} - -MIPS_MACHINE(AR71XX_MACH_ALL0258N, "ALL0258N", "Allnet ALL0258N", - all0258n_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap113.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap113.c deleted file mode 100644 index 2ece3987b2..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap113.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * Atheros AP113 board support - * - * Copyright (C) 2011 Florian Fainelli - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-pb9x-pci.h" -#include "dev-usb.h" - -#define AP113_GPIO_LED_USB 0 -#define AP113_GPIO_LED_STATUS 1 -#define AP113_GPIO_LED_ST 11 - -#define AP113_GPIO_BTN_JUMPSTART 12 - -#define AP113_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AP113_KEYS_DEBOUNCE_INTERVAL (3 * AP113_KEYS_POLL_INTERVAL) - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition ap113_parts[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "rootfs", - .offset = 0x010000, - .size = 0x300000, - }, - { - .name = "uImage", - .offset = 0x300000, - .size = 0x3e0000, - }, - { - .name = "NVRAM", - .offset = 0x3e0000, - .size = 0x010000, - }, - { - .name = "ART", - .offset = 0x3f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, -}; -#define ap113_nr_parts ARRAY_SIZE(ap113_parts) -#else -#define ap113_parts NULL -#define ap113_nr_parts 0 -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data ap113_flash_data = { - .parts = ap113_parts, - .nr_parts = ap113_nr_parts, -}; - -static struct gpio_led ap113_leds_gpio[] __initdata = { - { - .name = "ap113:green:usb", - .gpio = AP113_GPIO_LED_USB, - .active_low = 1, - }, - { - .name = "ap113:green:status", - .gpio = AP113_GPIO_LED_STATUS, - .active_low = 1, - }, - { - .name = "ap113:green:st", - .gpio = AP113_GPIO_LED_ST, - .active_low = 1, - } -}; - -static struct gpio_keys_button ap113_gpio_keys[] __initdata = { - { - .desc = "jumpstart button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = AP113_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP113_GPIO_BTN_JUMPSTART, - .active_low = 1, - }, -}; - -static void __init ap113_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); - - ar71xx_add_device_m25p80(&ap113_flash_data); - - ar71xx_add_device_mdio(0, ~BIT(0)); - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.speed = SPEED_1000; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - ar71xx_eth0_data.phy_mask = BIT(0); - - ar71xx_add_device_eth(0); - - ar71xx_register_gpio_keys_polled(-1, AP113_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap113_gpio_keys), - ap113_gpio_keys); - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap113_leds_gpio), - ap113_leds_gpio); - - ar71xx_add_device_usb(); - - pb9x_pci_init(); -} - -MIPS_MACHINE(AR71XX_MACH_AP113, "AP113", "Atheros AP113", - ap113_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap121.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap121.c deleted file mode 100644 index d14996f593..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap121.c +++ /dev/null @@ -1,237 +0,0 @@ -/* - * Atheros AP121 board support - * - * Copyright (C) 2011 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-ar9xxx-wmac.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" - -#define AP121_GPIO_LED_WLAN 0 -#define AP121_GPIO_LED_USB 1 - -#define AP121_GPIO_BTN_JUMPSTART 11 -#define AP121_GPIO_BTN_RESET 12 - -#define AP121_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL) - -#define AP121_MAC0_OFFSET 0x0000 -#define AP121_MAC1_OFFSET 0x0006 -#define AP121_CALDATA_OFFSET 0x1000 -#define AP121_WMAC_MAC_OFFSET 0x1002 - -#define AP121_MINI_GPIO_LED_WLAN 0 -#define AP121_MINI_GPIO_BTN_JUMPSTART 12 -#define AP121_MINI_GPIO_BTN_RESET 11 - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition ap121_parts[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "rootfs", - .offset = 0x010000, - .size = 0x130000, - }, - { - .name = "uImage", - .offset = 0x140000, - .size = 0x0a0000, - }, - { - .name = "NVRAM", - .offset = 0x1e0000, - .size = 0x010000, - }, - { - .name = "ART", - .offset = 0x1f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, -}; -#define ap121_nr_parts ARRAY_SIZE(ap121_parts) - -static struct mtd_partition ap121_mini_parts[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x040000, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "u-boot-env", - .offset = 0x040000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "rootfs", - .offset = 0x050000, - .size = 0x2b0000, - }, - { - .name = "uImage", - .offset = 0x300000, - .size = 0x0e0000, - }, - { - .name = "NVRAM", - .offset = 0x3e0000, - .size = 0x010000, - }, - { - .name = "ART", - .offset = 0x3f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, -}; - -#define ap121_mini_nr_parts ARRAY_SIZE(ap121_parts) - -#else -#define ap121_parts NULL -#define ap121_nr_parts 0 -#define ap121_mini_parts NULL -#define ap121_mini_nr_parts 0 -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data ap121_flash_data = { - .parts = ap121_parts, - .nr_parts = ap121_nr_parts, -}; - -static struct gpio_led ap121_leds_gpio[] __initdata = { - { - .name = "ap121:green:usb", - .gpio = AP121_GPIO_LED_USB, - .active_low = 0, - }, - { - .name = "ap121:green:wlan", - .gpio = AP121_GPIO_LED_WLAN, - .active_low = 0, - }, -}; - -static struct gpio_keys_button ap121_gpio_keys[] __initdata = { - { - .desc = "jumpstart button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP121_GPIO_BTN_JUMPSTART, - .active_low = 1, - }, - { - .desc = "reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP121_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct gpio_led ap121_mini_leds_gpio[] __initdata = { - { - .name = "ap121:green:wlan", - .gpio = AP121_MINI_GPIO_LED_WLAN, - .active_low = 0, - }, -}; - -static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = { - { - .desc = "jumpstart button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP121_MINI_GPIO_BTN_JUMPSTART, - .active_low = 1, - }, - { - .desc = "reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP121_MINI_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init ap121_common_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ar71xx_add_device_m25p80(&ap121_flash_data); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0); - - ar71xx_add_device_mdio(0, 0x0); - - /* LAN ports */ - ar71xx_add_device_eth(1); - - /* WAN port */ - ar71xx_add_device_eth(0); - - ar9xxx_add_device_wmac(art + AP121_CALDATA_OFFSET, - art + AP121_WMAC_MAC_OFFSET); -} - -static void __init ap121_setup(void) -{ - ap121_flash_data.parts = ap121_parts; - ap121_flash_data.nr_parts = ap121_nr_parts; - - ap121_common_setup(); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio), - ap121_leds_gpio); - ar71xx_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap121_gpio_keys), - ap121_gpio_keys); - - ar71xx_add_device_usb(); -} - -static void __init ap121_mini_setup(void) -{ - ap121_flash_data.parts = ap121_mini_parts; - ap121_flash_data.nr_parts = ap121_mini_nr_parts; - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio), - ap121_mini_leds_gpio); - ar71xx_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap121_mini_gpio_keys), - ap121_mini_gpio_keys); - - ap121_common_setup(); -} - -MIPS_MACHINE(AR71XX_MACH_AP121, "AP121", "Atheros AP121", - ap121_setup); - -MIPS_MACHINE(AR71XX_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI", - ap121_mini_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap81.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap81.c deleted file mode 100644 index 802dbec0c1..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap81.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * Atheros AP81 board support - * - * Copyright (C) 2009 Gabor Juhos - * Copyright (C) 2009 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ar9xxx-wmac.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" - -#define AP81_GPIO_LED_STATUS 1 -#define AP81_GPIO_LED_AOSS 3 -#define AP81_GPIO_LED_WLAN 6 -#define AP81_GPIO_LED_POWER 14 - -#define AP81_GPIO_BTN_SW4 12 -#define AP81_GPIO_BTN_SW1 21 - -#define AP81_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AP81_KEYS_DEBOUNCE_INTERVAL (3 * AP81_KEYS_POLL_INTERVAL) - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition ap81_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x040000, - .size = 0x010000, - }, { - .name = "rootfs", - .offset = 0x050000, - .size = 0x500000, - }, { - .name = "uImage", - .offset = 0x550000, - .size = 0x100000, - }, { - .name = "ART", - .offset = 0x650000, - .size = 0x1b0000, - .mask_flags = MTD_WRITEABLE, - } -}; -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data ap81_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = ap81_partitions, - .nr_parts = ARRAY_SIZE(ap81_partitions), -#endif -}; - -static struct gpio_led ap81_leds_gpio[] __initdata = { - { - .name = "ap81:green:status", - .gpio = AP81_GPIO_LED_STATUS, - .active_low = 1, - }, { - .name = "ap81:amber:aoss", - .gpio = AP81_GPIO_LED_AOSS, - .active_low = 1, - }, { - .name = "ap81:green:wlan", - .gpio = AP81_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "ap81:green:power", - .gpio = AP81_GPIO_LED_POWER, - .active_low = 1, - } -}; - -static struct gpio_keys_button ap81_gpio_keys[] __initdata = { - { - .desc = "sw1", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP81_GPIO_BTN_SW1, - .active_low = 1, - }, { - .desc = "sw4", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP81_GPIO_BTN_SW4, - .active_low = 1, - } -}; - -static void __init ap81_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ar71xx_add_device_mdio(0, 0x0); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth0_data.speed = SPEED_100; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - ar71xx_eth0_data.has_ar8216 = 1; - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, eeprom, 1); - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth1_data.phy_mask = 0x10; - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ar71xx_add_device_usb(); - - ar71xx_add_device_m25p80(&ap81_flash_data); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio), - ap81_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap81_gpio_keys), - ap81_gpio_keys); - - ar9xxx_add_device_wmac(eeprom, NULL); -} - -MIPS_MACHINE(AR71XX_MACH_AP81, "AP81", "Atheros AP81", ap81_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap83.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap83.c deleted file mode 100644 index 2eab994555..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap83.c +++ /dev/null @@ -1,267 +0,0 @@ -/* - * Atheros AP83 board support - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-ar9xxx-wmac.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" - -#define AP83_GPIO_LED_WLAN 6 -#define AP83_GPIO_LED_POWER 14 -#define AP83_GPIO_LED_JUMPSTART 15 -#define AP83_GPIO_BTN_JUMPSTART 12 -#define AP83_GPIO_BTN_RESET 21 - -#define AP83_050_GPIO_VSC7385_CS 1 -#define AP83_050_GPIO_VSC7385_MISO 3 -#define AP83_050_GPIO_VSC7385_MOSI 16 -#define AP83_050_GPIO_VSC7385_SCK 17 - -#define AP83_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AP83_KEYS_DEBOUNCE_INTERVAL (3 * AP83_KEYS_POLL_INTERVAL) - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition ap83_flash_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x040000, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "kernel", - .offset = 0x060000, - .size = 0x140000, - }, { - .name = "rootfs", - .offset = 0x1a0000, - .size = 0x650000, - }, { - .name = "art", - .offset = 0x7f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x060000, - .size = 0x790000, - } -}; -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct ar91xx_flash_platform_data ap83_flash_data = { - .width = 2, -#ifdef CONFIG_MTD_PARTITIONS - .parts = ap83_flash_partitions, - .nr_parts = ARRAY_SIZE(ap83_flash_partitions), -#endif -}; - -static struct resource ap83_flash_resources[] = { - [0] = { - .start = AR71XX_SPI_BASE, - .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device ap83_flash_device = { - .name = "ar91xx-flash", - .id = -1, - .resource = ap83_flash_resources, - .num_resources = ARRAY_SIZE(ap83_flash_resources), - .dev = { - .platform_data = &ap83_flash_data, - } -}; - -static struct gpio_led ap83_leds_gpio[] __initdata = { - { - .name = "ap83:green:jumpstart", - .gpio = AP83_GPIO_LED_JUMPSTART, - .active_low = 0, - }, { - .name = "ap83:green:power", - .gpio = AP83_GPIO_LED_POWER, - .active_low = 0, - }, { - .name = "ap83:green:wlan", - .gpio = AP83_GPIO_LED_WLAN, - .active_low = 0, - }, -}; - -static struct gpio_keys_button ap83_gpio_keys[] __initdata = { - { - .desc = "soft_reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP83_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "jumpstart", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP83_GPIO_BTN_JUMPSTART, - .active_low = 1, - } -}; - -static struct resource ap83_040_spi_resources[] = { - [0] = { - .start = AR71XX_SPI_BASE, - .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device ap83_040_spi_device = { - .name = "ap83-spi", - .id = 0, - .resource = ap83_040_spi_resources, - .num_resources = ARRAY_SIZE(ap83_040_spi_resources), -}; - -static struct spi_gpio_platform_data ap83_050_spi_data = { - .miso = AP83_050_GPIO_VSC7385_MISO, - .mosi = AP83_050_GPIO_VSC7385_MOSI, - .sck = AP83_050_GPIO_VSC7385_SCK, - .num_chipselect = 1, -}; - -static struct platform_device ap83_050_spi_device = { - .name = "spi_gpio", - .id = 0, - .dev = { - .platform_data = &ap83_050_spi_data, - } -}; - -static void ap83_vsc7385_reset(void) -{ - ar71xx_device_stop(RESET_MODULE_GE1_PHY); - udelay(10); - ar71xx_device_start(RESET_MODULE_GE1_PHY); - mdelay(50); -} - -static struct vsc7385_platform_data ap83_vsc7385_data = { - .reset = ap83_vsc7385_reset, - .ucode_name = "vsc7385_ucode_ap83.bin", - .mac_cfg = { - .tx_ipg = 6, - .bit2 = 0, - .clk_sel = 3, - }, -}; - -static struct spi_board_info ap83_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "spi-vsc7385", - .platform_data = &ap83_vsc7385_data, - .controller_data = (void *) AP83_050_GPIO_VSC7385_CS, - } -}; - -static void __init ap83_generic_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ar71xx_add_device_mdio(0, 0xfffffffe); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.phy_mask = 0x1; - - ar71xx_add_device_eth(0); - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, eeprom, 1); - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth1_data.speed = SPEED_1000; - ar71xx_eth1_data.duplex = DUPLEX_FULL; - - ar71xx_eth1_pll_data.pll_1000 = 0x1f000000; - - ar71xx_add_device_eth(1); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio), - ap83_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, AP83_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap83_gpio_keys), - ap83_gpio_keys); - - ar71xx_add_device_usb(); - - ar9xxx_add_device_wmac(eeprom, NULL); - - platform_device_register(&ap83_flash_device); - - spi_register_board_info(ap83_spi_info, ARRAY_SIZE(ap83_spi_info)); -} - -static void __init ap83_040_setup(void) -{ - ap83_flash_data.is_shared = 1; - ap83_generic_setup(); - platform_device_register(&ap83_040_spi_device); -} - -static void __init ap83_050_setup(void) -{ - ap83_generic_setup(); - platform_device_register(&ap83_050_spi_device); -} - -static void __init ap83_setup(void) -{ - u8 *board_id = (u8 *) KSEG1ADDR(0x1fff1244); - unsigned int board_version; - - board_version = (unsigned int)(board_id[0] - '0'); - board_version += ((unsigned int)(board_id[1] - '0')) * 10; - - switch (board_version) { - case 40: - ap83_040_setup(); - break; - case 50: - ap83_050_setup(); - break; - default: - printk(KERN_WARNING "AP83-%03u board is not yet supported\n", - board_version); - } -} - -MIPS_MACHINE(AR71XX_MACH_AP83, "AP83", "Atheros AP83", ap83_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap96.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap96.c deleted file mode 100644 index 5882af29f9..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap96.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * Atheros AP96 board support - * - * Copyright (C) 2009 Marco Porsch - * Copyright (C) 2009-2010 Gabor Juhos - * Copyright (C) 2010 Atheros Communications - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ap94-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" - -#define AP96_GPIO_LED_12_GREEN 0 -#define AP96_GPIO_LED_3_GREEN 1 -#define AP96_GPIO_LED_2_GREEN 2 -#define AP96_GPIO_LED_WPS_GREEN 4 -#define AP96_GPIO_LED_5_GREEN 5 -#define AP96_GPIO_LED_4_ORANGE 6 - -/* Reset button - next to the power connector */ -#define AP96_GPIO_BTN_RESET 3 -/* WPS button - next to a led on right */ -#define AP96_GPIO_BTN_WPS 8 - -#define AP96_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AP96_KEYS_DEBOUNCE_INTERVAL (3 * AP96_KEYS_POLL_INTERVAL) - -#define AP96_WMAC0_MAC_OFFSET 0x120c -#define AP96_WMAC1_MAC_OFFSET 0x520c -#define AP96_CALDATA0_OFFSET 0x1000 -#define AP96_CALDATA1_OFFSET 0x5000 - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition ap96_partitions[] = { - { - .name = "uboot", - .offset = 0, - .size = 0x030000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "env", - .offset = 0x030000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "rootfs", - .offset = 0x040000, - .size = 0x600000, - }, { - .name = "uImage", - .offset = 0x640000, - .size = 0x1b0000, - }, { - .name = "caldata", - .offset = 0x7f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - } -}; -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data ap96_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = ap96_partitions, - .nr_parts = ARRAY_SIZE(ap96_partitions), -#endif -}; - -/* - * AP96 has 12 unlabeled leds in the front; these are numbered from 1 to 12 - * below (from left to right on the board). Led 1 seems to be on whenever the - * board is powered. Led 11 shows LAN link activity actity. Led 3 is orange; - * others are green. - * - * In addition, there is one led next to a button on the right side for WPS. - */ -static struct gpio_led ap96_leds_gpio[] __initdata = { - { - .name = "ap96:green:led2", - .gpio = AP96_GPIO_LED_2_GREEN, - .active_low = 1, - }, { - .name = "ap96:green:led3", - .gpio = AP96_GPIO_LED_3_GREEN, - .active_low = 1, - }, { - .name = "ap96:orange:led4", - .gpio = AP96_GPIO_LED_4_ORANGE, - .active_low = 1, - }, { - .name = "ap96:green:led5", - .gpio = AP96_GPIO_LED_5_GREEN, - .active_low = 1, - }, { - .name = "ap96:green:led12", - .gpio = AP96_GPIO_LED_12_GREEN, - .active_low = 1, - }, { /* next to a button on right */ - .name = "ap96:green:wps", - .gpio = AP96_GPIO_LED_WPS_GREEN, - .active_low = 1, - } -}; - -static struct gpio_keys_button ap96_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP96_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP96_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -#define AP96_WAN_PHYMASK 0x10 -#define AP96_LAN_PHYMASK 0x0f - -static void __init ap96_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ar71xx_add_device_mdio(0, ~(AP96_WAN_PHYMASK | AP96_LAN_PHYMASK)); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, art, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.phy_mask = AP96_LAN_PHYMASK; - ar71xx_eth0_data.speed = SPEED_1000; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - - ar71xx_add_device_eth(0); - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, art, 1); - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth1_data.phy_mask = AP96_WAN_PHYMASK; - - ar71xx_eth1_pll_data.pll_1000 = 0x1f000000; - - ar71xx_add_device_eth(1); - - ar71xx_add_device_usb(); - - ar71xx_add_device_m25p80(&ap96_flash_data); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap96_leds_gpio), - ap96_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, AP96_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap96_gpio_keys), - ap96_gpio_keys); - - ap94_pci_init(art + AP96_CALDATA0_OFFSET, - art + AP96_WMAC0_MAC_OFFSET, - art + AP96_CALDATA1_OFFSET, - art + AP96_WMAC1_MAC_OFFSET); -} - -MIPS_MACHINE(AR71XX_MACH_AP96, "AP96", "Atheros AP96", ap96_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-aw-nr580.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-aw-nr580.c deleted file mode 100644 index 54dc96c713..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-aw-nr580.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * AzureWave AW-NR580 board support - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-gpio-buttons.h" -#include "dev-pb42-pci.h" -#include "dev-leds-gpio.h" - -#define AW_NR580_GPIO_LED_READY_RED 0 -#define AW_NR580_GPIO_LED_WLAN 1 -#define AW_NR580_GPIO_LED_READY_GREEN 2 -#define AW_NR580_GPIO_LED_WPS_GREEN 4 -#define AW_NR580_GPIO_LED_WPS_AMBER 5 - -#define AW_NR580_GPIO_BTN_WPS 3 -#define AW_NR580_GPIO_BTN_RESET 11 - -#define AW_NR580_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AW_NR580_KEYS_DEBOUNCE_INTERVAL (3 * AW_NR580_KEYS_POLL_INTERVAL) - -static struct gpio_led aw_nr580_leds_gpio[] __initdata = { - { - .name = "aw-nr580:red:ready", - .gpio = AW_NR580_GPIO_LED_READY_RED, - .active_low = 0, - }, { - .name = "aw-nr580:green:ready", - .gpio = AW_NR580_GPIO_LED_READY_GREEN, - .active_low = 0, - }, { - .name = "aw-nr580:green:wps", - .gpio = AW_NR580_GPIO_LED_WPS_GREEN, - .active_low = 0, - }, { - .name = "aw-nr580:amber:wps", - .gpio = AW_NR580_GPIO_LED_WPS_AMBER, - .active_low = 0, - }, { - .name = "aw-nr580:green:wlan", - .gpio = AW_NR580_GPIO_LED_WLAN, - .active_low = 0, - } -}; - -static struct gpio_keys_button aw_nr580_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL, - .gpio = AW_NR580_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL, - .gpio = AW_NR580_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static const char *aw_nr580_part_probes[] = { - "RedBoot", - NULL, -}; - -static struct flash_platform_data aw_nr580_flash_data = { - .part_probes = aw_nr580_part_probes, -}; - -static void __init aw_nr580_setup(void) -{ - ar71xx_add_device_mdio(0, 0x0); - - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ar71xx_eth0_data.speed = SPEED_100; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - - ar71xx_add_device_eth(0); - - pb42_pci_init(); - - ar71xx_add_device_m25p80(&aw_nr580_flash_data); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(aw_nr580_leds_gpio), - aw_nr580_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, AW_NR580_KEYS_POLL_INTERVAL, - ARRAY_SIZE(aw_nr580_gpio_keys), - aw_nr580_gpio_keys); -} - -MIPS_MACHINE(AR71XX_MACH_AW_NR580, "AW-NR580", "AzureWave AW-NR580", - aw_nr580_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-db120.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-db120.c deleted file mode 100644 index 3a95fa26dd..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-db120.c +++ /dev/null @@ -1,184 +0,0 @@ -/* - * Atheros DB120 board (WASP SoC) support - * - * Copyright (C) 2010-2011 Jaiganesh Narayanan - * Copyright (C) 2011 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" -#include "dev-ar9xxx-wmac.h" -#include "dev-db120-pci.h" - -#define DB120_GPIO_LED_USB 11 -#define DB120_GPIO_LED_WLAN_5G 12 -#define DB120_GPIO_LED_WLAN_2G 13 -#define DB120_GPIO_LED_STATUS 14 -#define DB120_GPIO_LED_WPS 15 - -#define DB120_GPIO_BTN_WPS 16 - -#define DB120_MAC0_OFFSET 0 -#define DB120_MAC1_OFFSET 6 -#define DB120_WMAC_CALDATA_OFFSET 0x1000 -#define DB120_PCIE_CALDATA_OFFSET 0x5000 - -#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL) - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition db120_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x040000, - .size = 0x010000, - }, { - .name = "rootfs", - .offset = 0x050000, - .size = 0x630000, - }, { - .name = "uImage", - .offset = 0x680000, - .size = 0x160000, - }, { - .name = "NVRAM", - .offset = 0x7E0000, - .size = 0x010000, - }, { - .name = "ART", - .offset = 0x7F0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - } -}; -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data db120_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = db120_partitions, - .nr_parts = ARRAY_SIZE(db120_partitions), -#endif -}; - -static struct gpio_led db120_leds_gpio[] __initdata = { - { - .name = "db120:green:status", - .gpio = DB120_GPIO_LED_STATUS, - .active_low = 1, - }, { - .name = "db120:green:wps", - .gpio = DB120_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "db120:green:wlan-5g", - .gpio = DB120_GPIO_LED_WLAN_5G, - .active_low = 1, - }, { - .name = "db120:green:wlan-2g", - .gpio = DB120_GPIO_LED_WLAN_2G, - .active_low = 1, - }, { - .name = "db120:green:usb", - .gpio = DB120_GPIO_LED_USB, - .active_low = 1, - } -}; - -static struct gpio_keys_button db120_gpio_keys[] __initdata = { - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL, - .gpio = DB120_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static void __init db120_gmac_setup(void) -{ - void __iomem *base; - u32 t; - - base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE); - - t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG); - t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 | - AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE); - __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG); - - iounmap(base); -} - -static void __init db120_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ar71xx_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO); - - ar71xx_add_device_usb(); - - ar71xx_add_device_m25p80(&db120_flash_data); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio), - db120_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL, - ARRAY_SIZE(db120_gpio_keys), - db120_gpio_keys); - - db120_gmac_setup(); - - ar71xx_add_device_mdio(0, 0x0); - ar71xx_add_device_mdio(1, 0x0); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0); -#if 0 - /* GMAC0 is connected to an AR8327 switch */ - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.speed = SPEED_1000; - ar71xx_eth0_data.duplex = DUPLEX_FULL; -#else - /* GMAC0 is connected to PHY4 of the internal switch */ - ar71xx_switch_data.phy4_mii_en = 1; - - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ar71xx_eth0_data.phy_mask = BIT(4); - ar71xx_eth0_data.mii_bus_dev = &ar71xx_mdio1_device.dev; -#endif - - ar71xx_add_device_eth(0); - - /* GMAC1 is connected to the internal switch */ - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0); - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ar71xx_eth1_data.speed = SPEED_1000; - ar71xx_eth1_data.duplex = DUPLEX_FULL; - - ar71xx_add_device_eth(1); - - ar9xxx_add_device_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL); - - db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL); -} - -MIPS_MACHINE(AR71XX_MACH_DB120, "DB120", "Atheros DB120", db120_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-600-a1.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-600-a1.c deleted file mode 100644 index 3b39b0653c..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-600-a1.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * D-Link DIR-600 rev. A1 board support - * - * Copyright (C) 2010-2012 Gabor Juhos - * Copyright (C) 2012 Vadim Girlin - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ap91-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "nvram.h" - -#define DIR_600_A1_GPIO_LED_WPS 0 -#define DIR_600_A1_GPIO_LED_POWER_AMBER 1 -#define DIR_600_A1_GPIO_LED_POWER_GREEN 6 -#define DIR_600_A1_GPIO_LED_LAN1 13 -#define DIR_600_A1_GPIO_LED_LAN2 14 -#define DIR_600_A1_GPIO_LED_LAN3 15 -#define DIR_600_A1_GPIO_LED_LAN4 16 -#define DIR_600_A1_GPIO_LED_WAN_AMBER 7 -#define DIR_600_A1_GPIO_LED_WAN_GREEN 17 - -#define DIR_600_A1_GPIO_BTN_RESET 8 -#define DIR_600_A1_GPIO_BTN_WPS 12 - -#define DIR_600_A1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DIR_600_A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_600_A1_KEYS_POLL_INTERVAL) - -#define DIR_600_A1_NVRAM_ADDR 0x1f030000 -#define DIR_600_A1_NVRAM_SIZE 0x10000 - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition dir_600_a1_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x030000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "nvram", - .offset = 0x030000, - .size = 0x010000, - }, { - .name = "kernel", - .offset = 0x040000, - .size = 0x0e0000, - }, { - .name = "rootfs", - .offset = 0x120000, - .size = 0x2c0000, - }, { - .name = "mac", - .offset = 0x3e0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "art", - .offset = 0x3f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x040000, - .size = 0x3a0000, - } -}; -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data dir_600_a1_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = dir_600_a1_partitions, - .nr_parts = ARRAY_SIZE(dir_600_a1_partitions), -#endif -}; - -static struct gpio_led dir_600_a1_leds_gpio[] __initdata = { - { - .name = "d-link:green:power", - .gpio = DIR_600_A1_GPIO_LED_POWER_GREEN, - }, { - .name = "d-link:amber:power", - .gpio = DIR_600_A1_GPIO_LED_POWER_AMBER, - }, { - .name = "d-link:amber:wan", - .gpio = DIR_600_A1_GPIO_LED_WAN_AMBER, - }, { - .name = "d-link:green:wan", - .gpio = DIR_600_A1_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, { - .name = "d-link:green:lan1", - .gpio = DIR_600_A1_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "d-link:green:lan2", - .gpio = DIR_600_A1_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "d-link:green:lan3", - .gpio = DIR_600_A1_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "d-link:green:lan4", - .gpio = DIR_600_A1_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "d-link:blue:wps", - .gpio = DIR_600_A1_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button dir_600_a1_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_600_A1_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_600_A1_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static void __init dir_600_a1_setup(void) -{ - const char *nvram = (char *) KSEG1ADDR(DIR_600_A1_NVRAM_ADDR); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - u8 mac_buff[6]; - u8 *mac = NULL; - - if (nvram_parse_mac_addr(nvram, DIR_600_A1_NVRAM_SIZE, - "lan_mac=", mac_buff) == 0) { - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac_buff, 0); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac_buff, 1); - mac = mac_buff; - } - - ar71xx_add_device_m25p80(&dir_600_a1_flash_data); - - ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio), - dir_600_a1_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, DIR_600_A1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dir_600_a1_gpio_keys), - dir_600_a1_gpio_keys); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); - - ar71xx_add_device_mdio(0, 0x0); - - /* LAN ports */ - ar71xx_add_device_eth(1); - - /* WAN port */ - ar71xx_add_device_eth(0); - - ap91_pci_init(ee, mac); -} - -MIPS_MACHINE(AR71XX_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1", - dir_600_a1_setup); - -static void __init dir_615_e4_setup(void) -{ - dir_600_a1_setup(); - ap91_pci_setup_wmac_led_pin(1); -} - -MIPS_MACHINE(AR71XX_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4", - dir_615_e4_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-c1.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-c1.c deleted file mode 100644 index c8ca49d85c..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-c1.c +++ /dev/null @@ -1,175 +0,0 @@ -/* - * D-Link DIR-615 rev C1 board support - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ar9xxx-wmac.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "nvram.h" - -#define DIR_615C1_GPIO_LED_ORANGE_STATUS 1 /* ORANGE:STATUS:TRICOLOR */ -#define DIR_615C1_GPIO_LED_BLUE_WPS 3 /* BLUE:WPS */ -#define DIR_615C1_GPIO_LED_GREEN_WAN 4 /* GREEN:WAN:TRICOLOR */ -#define DIR_615C1_GPIO_LED_GREEN_WANCPU 5 /* GREEN:WAN:CPU:TRICOLOR */ -#define DIR_615C1_GPIO_LED_GREEN_WLAN 6 /* GREEN:WLAN */ -#define DIR_615C1_GPIO_LED_GREEN_STATUS 14 /* GREEN:STATUS:TRICOLOR */ -#define DIR_615C1_GPIO_LED_ORANGE_WAN 15 /* ORANGE:WAN:TRICOLOR */ - -/* buttons may need refinement */ - -#define DIR_615C1_GPIO_BTN_WPS 12 -#define DIR_615C1_GPIO_BTN_RESET 21 - -#define DIR_615C1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DIR_615C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615C1_KEYS_POLL_INTERVAL) - -#define DIR_615C1_CONFIG_ADDR 0x1f020000 -#define DIR_615C1_CONFIG_SIZE 0x10000 - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition dir_615c1_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "config", - .offset = 0x020000, - .size = 0x010000, - }, { - .name = "kernel", - .offset = 0x030000, - .size = 0x0e0000, - }, { - .name = "rootfs", - .offset = 0x110000, - .size = 0x2e0000, - }, { - .name = "art", - .offset = 0x3f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x030000, - .size = 0x3c0000, - } -}; -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data dir_615c1_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = dir_615c1_partitions, - .nr_parts = ARRAY_SIZE(dir_615c1_partitions), -#endif -}; - -static struct gpio_led dir_615c1_leds_gpio[] __initdata = { - { - .name = "d-link:orange:status", - .gpio = DIR_615C1_GPIO_LED_ORANGE_STATUS, - .active_low = 1, - }, { - .name = "d-link:blue:wps", - .gpio = DIR_615C1_GPIO_LED_BLUE_WPS, - .active_low = 1, - }, { - .name = "d-link:green:wan", - .gpio = DIR_615C1_GPIO_LED_GREEN_WAN, - .active_low = 1, - }, { - .name = "d-link:green:wancpu", - .gpio = DIR_615C1_GPIO_LED_GREEN_WANCPU, - .active_low = 1, - }, { - .name = "d-link:green:wlan", - .gpio = DIR_615C1_GPIO_LED_GREEN_WLAN, - .active_low = 1, - }, { - .name = "d-link:green:status", - .gpio = DIR_615C1_GPIO_LED_GREEN_STATUS, - .active_low = 1, - }, { - .name = "d-link:orange:wan", - .gpio = DIR_615C1_GPIO_LED_ORANGE_WAN, - .active_low = 1, - } - -}; - -static struct gpio_keys_button dir_615c1_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_615C1_GPIO_BTN_RESET, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_615C1_GPIO_BTN_WPS, - } -}; - -#define DIR_615C1_LAN_PHYMASK BIT(0) -#define DIR_615C1_WAN_PHYMASK BIT(4) -#define DIR_615C1_MDIO_MASK (~(DIR_615C1_LAN_PHYMASK | \ - DIR_615C1_WAN_PHYMASK)) - -static void __init dir_615c1_setup(void) -{ - const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - u8 mac[6]; - u8 *wlan_mac = NULL; - - if (nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE, - "lan_mac=", mac) == 0) { - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); - wlan_mac = mac; - } - - ar71xx_add_device_mdio(0, DIR_615C1_MDIO_MASK); - - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth0_data.phy_mask = DIR_615C1_LAN_PHYMASK; - - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth1_data.phy_mask = DIR_615C1_WAN_PHYMASK; - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ar71xx_add_device_m25p80(&dir_615c1_flash_data); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio), - dir_615c1_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, DIR_615C1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dir_615c1_gpio_keys), - dir_615c1_gpio_keys); - - ar9xxx_add_device_wmac(eeprom, wlan_mac); -} - -MIPS_MACHINE(AR71XX_MACH_DIR_615_C1, "DIR-615-C1", "D-Link DIR-615 rev. C1", - dir_615c1_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-825-b1.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-825-b1.c deleted file mode 100644 index a67676a651..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-825-b1.c +++ /dev/null @@ -1,211 +0,0 @@ -/* - * D-Link DIR-825 rev. B1 board support - * - * Copyright (C) 2009-2011 Lukas Kuna, Evkanet, s.r.o. - * - * based on mach-wndr3700.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ap94-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" - -#define DIR825B1_GPIO_LED_BLUE_USB 0 -#define DIR825B1_GPIO_LED_ORANGE_POWER 1 -#define DIR825B1_GPIO_LED_BLUE_POWER 2 -#define DIR825B1_GPIO_LED_BLUE_WPS 4 -#define DIR825B1_GPIO_LED_ORANGE_PLANET 6 -#define DIR825B1_GPIO_LED_BLUE_PLANET 11 - -#define DIR825B1_GPIO_BTN_RESET 3 -#define DIR825B1_GPIO_BTN_WPS 8 - -#define DIR825B1_GPIO_RTL8366_SDA 5 -#define DIR825B1_GPIO_RTL8366_SCK 7 - -#define DIR825B1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DIR825B1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825B1_KEYS_POLL_INTERVAL) - -#define DIR825B1_CAL_LOCATION_0 0x1f661000 -#define DIR825B1_CAL_LOCATION_1 0x1f665000 - -#define DIR825B1_MAC_LOCATION_0 0x1f66ffa0 -#define DIR825B1_MAC_LOCATION_1 0x1f66ffb4 - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition dir825b1_partitions[] = { - { - .name = "uboot", - .offset = 0, - .size = 0x040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "config", - .offset = 0x040000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x050000, - .size = 0x610000, - }, { - .name = "caldata", - .offset = 0x660000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "unknown", - .offset = 0x670000, - .size = 0x190000, - .mask_flags = MTD_WRITEABLE, - } -}; -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data dir825b1_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = dir825b1_partitions, - .nr_parts = ARRAY_SIZE(dir825b1_partitions), -#endif -}; - -static struct gpio_led dir825b1_leds_gpio[] __initdata = { - { - .name = "d-link:blue:usb", - .gpio = DIR825B1_GPIO_LED_BLUE_USB, - .active_low = 1, - }, { - .name = "d-link:orange:power", - .gpio = DIR825B1_GPIO_LED_ORANGE_POWER, - .active_low = 1, - }, { - .name = "d-link:blue:power", - .gpio = DIR825B1_GPIO_LED_BLUE_POWER, - .active_low = 1, - }, { - .name = "d-link:blue:wps", - .gpio = DIR825B1_GPIO_LED_BLUE_WPS, - .active_low = 1, - }, { - .name = "d-link:orange:planet", - .gpio = DIR825B1_GPIO_LED_ORANGE_PLANET, - .active_low = 1, - }, { - .name = "d-link:blue:planet", - .gpio = DIR825B1_GPIO_LED_BLUE_PLANET, - .active_low = 1, - } -}; - -static struct gpio_keys_button dir825b1_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR825B1_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR825B1_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static struct rtl8366_initval dir825b1_rtl8366s_initvals[] = { - { .reg = 0x06, .val = 0x0108 }, -}; - -static struct rtl8366_platform_data dir825b1_rtl8366s_data = { - .gpio_sda = DIR825B1_GPIO_RTL8366_SDA, - .gpio_sck = DIR825B1_GPIO_RTL8366_SCK, - .num_initvals = ARRAY_SIZE(dir825b1_rtl8366s_initvals), - .initvals = dir825b1_rtl8366s_initvals, -}; - -static struct platform_device dir825b1_rtl8366s_device = { - .name = RTL8366S_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &dir825b1_rtl8366s_data, - } -}; - -static void dir825b1_read_ascii_mac(u8 *dest, unsigned int src_addr) -{ - int ret; - u8 *src = (u8 *)KSEG1ADDR(src_addr); - - ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", - &dest[0], &dest[1], &dest[2], - &dest[3], &dest[4], &dest[5]); - - if (ret != ETH_ALEN) memset(dest, 0, ETH_ALEN); -} - -static void __init dir825b1_setup(void) -{ - u8 mac1[ETH_ALEN], mac2[ETH_ALEN]; - - dir825b1_read_ascii_mac(mac1, DIR825B1_MAC_LOCATION_0); - dir825b1_read_ascii_mac(mac2, DIR825B1_MAC_LOCATION_1); - - ar71xx_add_device_mdio(0, 0x0); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 2); - ar71xx_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.speed = SPEED_1000; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - ar71xx_eth0_pll_data.pll_1000 = 0x11110000; - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac1, 3); - ar71xx_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth1_data.phy_mask = 0x10; - ar71xx_eth1_pll_data.pll_1000 = 0x11110000; - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ar71xx_add_device_m25p80(&dir825b1_flash_data); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio), - dir825b1_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, DIR825B1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dir825b1_gpio_keys), - dir825b1_gpio_keys); - - ar71xx_add_device_usb(); - - platform_device_register(&dir825b1_rtl8366s_device); - - ap94_pci_setup_wmac_led_pin(0, 5); - ap94_pci_setup_wmac_led_pin(1, 5); - - ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0), mac1, - (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1), mac2); -} - -MIPS_MACHINE(AR71XX_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1", - dir825b1_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-eap7660d.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-eap7660d.c deleted file mode 100644 index 6187cba422..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-eap7660d.c +++ /dev/null @@ -1,189 +0,0 @@ -/* - * Senao EAP7660D board support - * - * Copyright (C) 2010 Daniel Golle - * Copyright (C) 2008 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" - -#define EAP7660D_KEYS_POLL_INTERVAL 20 /* msecs */ -#define EAP7660D_KEYS_DEBOUNCE_INTERVAL (3 * EAP7660D_KEYS_POLL_INTERVAL) - -#define EAP7660D_GPIO_DS4 7 -#define EAP7660D_GPIO_DS5 2 -#define EAP7660D_GPIO_DS7 0 -#define EAP7660D_GPIO_DS8 4 -#define EAP7660D_GPIO_SW1 3 -#define EAP7660D_GPIO_SW3 8 -#define EAP7660D_PHYMASK BIT(20) -#define EAP7660D_BOARDCONFIG 0x1F7F0000 -#define EAP7660D_GBIC_MAC_OFFSET 0x1000 -#define EAP7660D_WMAC0_MAC_OFFSET 0x1010 -#define EAP7660D_WMAC1_MAC_OFFSET 0x1016 -#define EAP7660D_WMAC0_CALDATA_OFFSET 0x2000 -#define EAP7660D_WMAC1_CALDATA_OFFSET 0x3000 - -#ifdef CONFIG_PCI -static struct ath5k_platform_data eap7660d_wmac0_data; -static struct ath5k_platform_data eap7660d_wmac1_data; -static char eap7660d_wmac0_mac[6]; -static char eap7660d_wmac1_mac[6]; -static u16 eap7660d_wmac0_eeprom[ATH5K_PLAT_EEP_MAX_WORDS]; -static u16 eap7660d_wmac1_eeprom[ATH5K_PLAT_EEP_MAX_WORDS]; - -static struct ar71xx_pci_irq eap7660d_pci_irqs[] __initdata = { - { - .slot = 0, - .pin = 1, - .irq = AR71XX_PCI_IRQ_DEV0, - }, { - .slot = 1, - .pin = 1, - .irq = AR71XX_PCI_IRQ_DEV1, - } -}; - -static int eap7660d_pci_plat_dev_init(struct pci_dev *dev) -{ - switch (PCI_SLOT(dev->devfn)) { - case 17: - dev->dev.platform_data = &eap7660d_wmac0_data; - break; - - case 18: - dev->dev.platform_data = &eap7660d_wmac1_data; - break; - } - - return 0; -} - -void __init eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0, - u8 *cal_data1, u8 *mac_addr1) -{ - if (cal_data0 && *cal_data0 == 0xa55a) { - memcpy(eap7660d_wmac0_eeprom, cal_data0, - ATH5K_PLAT_EEP_MAX_WORDS); - eap7660d_wmac0_data.eeprom_data = eap7660d_wmac0_eeprom; - } - - if (cal_data1 && *cal_data1 == 0xa55a) { - memcpy(eap7660d_wmac1_eeprom, cal_data1, - ATH5K_PLAT_EEP_MAX_WORDS); - eap7660d_wmac1_data.eeprom_data = eap7660d_wmac1_eeprom; - } - - if (mac_addr0) { - memcpy(eap7660d_wmac0_mac, mac_addr0, - sizeof(eap7660d_wmac0_mac)); - eap7660d_wmac0_data.macaddr = eap7660d_wmac0_mac; - } - - if (mac_addr1) { - memcpy(eap7660d_wmac1_mac, mac_addr1, - sizeof(eap7660d_wmac1_mac)); - eap7660d_wmac1_data.macaddr = eap7660d_wmac1_mac; - } - - ar71xx_pci_plat_dev_init = eap7660d_pci_plat_dev_init; - ar71xx_pci_init(ARRAY_SIZE(eap7660d_pci_irqs), eap7660d_pci_irqs); -} -#else -static inline void eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0, - u8 *cal_data1, u8 *mac_addr1) -{ -} -#endif /* CONFIG_PCI */ - -static struct gpio_led eap7660d_leds_gpio[] __initdata = { - { - .name = "eap7660d:green:ds8", - .gpio = EAP7660D_GPIO_DS8, - .active_low = 0, - }, - { - .name = "eap7660d:green:ds5", - .gpio = EAP7660D_GPIO_DS5, - .active_low = 0, - }, - { - .name = "eap7660d:green:ds7", - .gpio = EAP7660D_GPIO_DS7, - .active_low = 0, - }, - { - .name = "eap7660d:green:ds4", - .gpio = EAP7660D_GPIO_DS4, - .active_low = 0, - } -}; - -static struct gpio_keys_button eap7660d_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL, - .gpio = EAP7660D_GPIO_SW1, - .active_low = 1, - }, - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL, - .gpio = EAP7660D_GPIO_SW3, - .active_low = 1, - } -}; - -static const char *eap7660d_part_probes[] = { - "RedBoot", - NULL, -}; - -static struct flash_platform_data eap7660d_flash_data = { - .part_probes = eap7660d_part_probes, -}; - -static void __init eap7660d_setup(void) -{ - u8 *boardconfig = (u8 *) KSEG1ADDR(EAP7660D_BOARDCONFIG); - - ar71xx_add_device_mdio(0, ~EAP7660D_PHYMASK); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, - boardconfig + EAP7660D_GBIC_MAC_OFFSET, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.phy_mask = EAP7660D_PHYMASK; - ar71xx_add_device_eth(0); - ar71xx_add_device_m25p80(&eap7660d_flash_data); - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(eap7660d_leds_gpio), - eap7660d_leds_gpio); - ar71xx_register_gpio_keys_polled(-1, EAP7660D_KEYS_POLL_INTERVAL, - ARRAY_SIZE(eap7660d_gpio_keys), - eap7660d_gpio_keys); - eap7660d_pci_init(boardconfig + EAP7660D_WMAC0_CALDATA_OFFSET, - boardconfig + EAP7660D_WMAC0_MAC_OFFSET, - boardconfig + EAP7660D_WMAC1_CALDATA_OFFSET, - boardconfig + EAP7660D_WMAC1_MAC_OFFSET); -}; - -MIPS_MACHINE(AR71XX_MACH_EAP7660D, "EAP7660D", "Senao EAP7660D", - eap7660d_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-hornet-ub.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-hornet-ub.c deleted file mode 100644 index 6173d223dd..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-hornet-ub.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * ALFA NETWORKS Hornet-UB board support - * - * Copyright (C) 2011 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-ar9xxx-wmac.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" - -#define HORNET_UB_GPIO_LED_WLAN 0 -#define HORNET_UB_GPIO_LED_USB 1 -#define HORNET_UB_GPIO_LED_LAN 13 -#define HORNET_UB_GPIO_LED_WAN 17 -#define HORNET_UB_GPIO_LED_WPS 27 - -#define HORNET_UB_GPIO_BTN_RESET 11 -#define HORNET_UB_GPIO_BTN_WPS 12 - -#define HORNET_UB_GPIO_USB_POWER 26 - -#define HORNET_UB_KEYS_POLL_INTERVAL 20 /* msecs */ -#define HORNET_UB_KEYS_DEBOUNCE_INTERVAL (3 * HORNET_UB_KEYS_POLL_INTERVAL) - -#define HORNET_UB_MAC0_OFFSET 0x0000 -#define HORNET_UB_MAC1_OFFSET 0x0006 -#define HORNET_UB_CALDATA_OFFSET 0x1000 - -static struct gpio_led hornet_ub_leds_gpio[] __initdata = { - { - .name = "alfa:blue:lan", - .gpio = HORNET_UB_GPIO_LED_LAN, - .active_low = 0, - }, - { - .name = "alfa:blue:usb", - .gpio = HORNET_UB_GPIO_LED_USB, - .active_low = 0, - }, - { - .name = "alfa:blue:wan", - .gpio = HORNET_UB_GPIO_LED_WAN, - .active_low = 1, - }, - { - .name = "alfa:blue:wlan", - .gpio = HORNET_UB_GPIO_LED_WLAN, - .active_low = 0, - }, - { - .name = "alfa:blue:wps", - .gpio = HORNET_UB_GPIO_LED_WPS, - .active_low = 1, - }, -}; - -static struct gpio_keys_button hornet_ub_gpio_keys[] __initdata = { - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL, - .gpio = HORNET_UB_GPIO_BTN_WPS, - .active_low = 1, - }, - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL, - .gpio = HORNET_UB_GPIO_BTN_RESET, - .active_low = 0, - } -}; - -static void __init hornet_ub_gpio_setup(void) -{ - u32 t; - - ar71xx_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - t = ar71xx_reset_rr(AR933X_RESET_REG_BOOTSTRAP); - t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN; - ar71xx_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t); - - gpio_request(HORNET_UB_GPIO_USB_POWER, "USB power"); - gpio_direction_output(HORNET_UB_GPIO_USB_POWER, 1); -} - -static void __init hornet_ub_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - hornet_ub_gpio_setup(); - - ar71xx_add_device_m25p80(NULL); - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(hornet_ub_leds_gpio), - hornet_ub_leds_gpio); - ar71xx_register_gpio_keys_polled(-1, HORNET_UB_KEYS_POLL_INTERVAL, - ARRAY_SIZE(hornet_ub_gpio_keys), - hornet_ub_gpio_keys); - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, - art + HORNET_UB_MAC0_OFFSET, 0); - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, - art + HORNET_UB_MAC1_OFFSET, 0); - - ar71xx_add_device_mdio(0, 0x0); - - ar71xx_add_device_eth(1); - ar71xx_add_device_eth(0); - - ar9xxx_add_device_wmac(art + HORNET_UB_CALDATA_OFFSET, NULL); - ar71xx_add_device_usb(); -} - -MIPS_MACHINE(AR71XX_MACH_HORNET_UB, "HORNET-UB", "ALFA NETWORKS Hornet-UB", - hornet_ub_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ja76pf.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ja76pf.c deleted file mode 100644 index 9f56c3fa73..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ja76pf.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * jjPlus JA76PF board support - */ - -#include -#include -#include -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-gpio-buttons.h" -#include "dev-pb42-pci.h" -#include "dev-usb.h" -#include "dev-leds-gpio.h" - -#define JA76PF_KEYS_POLL_INTERVAL 20 /* msecs */ -#define JA76PF_KEYS_DEBOUNCE_INTERVAL (3 * JA76PF_KEYS_POLL_INTERVAL) - -#define JA76PF_GPIO_I2C_SCL 0 -#define JA76PF_GPIO_I2C_SDA 1 -#define JA76PF_GPIO_LED_1 5 -#define JA76PF_GPIO_LED_2 4 -#define JA76PF_GPIO_LED_3 3 -#define JA76PF_GPIO_BTN_RESET 11 - -static struct gpio_led ja76pf_leds_gpio[] __initdata = { - { - .name = "ja76pf:green:led1", - .gpio = JA76PF_GPIO_LED_1, - .active_low = 1, - }, { - .name = "ja76pf:green:led2", - .gpio = JA76PF_GPIO_LED_2, - .active_low = 1, - }, { - .name = "ja76pf:green:led3", - .gpio = JA76PF_GPIO_LED_3, - .active_low = 1, - } -}; - -static struct gpio_keys_button ja76pf_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL, - .gpio = JA76PF_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct i2c_gpio_platform_data ja76pf_i2c_gpio_data = { - .sda_pin = JA76PF_GPIO_I2C_SDA, - .scl_pin = JA76PF_GPIO_I2C_SCL, -}; - -static struct platform_device ja76pf_i2c_gpio_device = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = &ja76pf_i2c_gpio_data, - } -}; - -static const char *ja76pf_part_probes[] = { - "RedBoot", - NULL, -}; - -static struct flash_platform_data ja76pf_flash_data = { - .part_probes = ja76pf_part_probes, -}; - -#define JA76PF_WAN_PHYMASK (1 << 4) -#define JA76PF_LAN_PHYMASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 < 3)) -#define JA76PF_MDIO_PHYMASK (JA76PF_LAN_PHYMASK | JA76PF_WAN_PHYMASK) - -static void __init ja76pf_init(void) -{ - ar71xx_add_device_m25p80(&ja76pf_flash_data); - - ar71xx_add_device_mdio(0, ~JA76PF_MDIO_PHYMASK); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.phy_mask = JA76PF_LAN_PHYMASK; - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth1_data.phy_mask = JA76PF_WAN_PHYMASK; - ar71xx_eth1_data.speed = SPEED_1000; - ar71xx_eth1_data.duplex = DUPLEX_FULL; - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - platform_device_register(&ja76pf_i2c_gpio_device); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ja76pf_leds_gpio), - ja76pf_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, JA76PF_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ja76pf_gpio_keys), - ja76pf_gpio_keys); - - ar71xx_add_device_usb(); - pb42_pci_init(); -} - -MIPS_MACHINE(AR71XX_MACH_JA76PF, "JA76PF", "jjPlus JA76PF", ja76pf_init); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-jwap003.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-jwap003.c deleted file mode 100644 index 3af42041f3..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-jwap003.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * jjPlus JWAP003 board support - * - */ - -#include -#include -#include -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-gpio-buttons.h" -#include "dev-pb42-pci.h" -#include "dev-usb.h" - -#define JWAP003_KEYS_POLL_INTERVAL 20 /* msecs */ -#define JWAP003_KEYS_DEBOUNCE_INTERVAL (3 * JWAP003_KEYS_POLL_INTERVAL) - -#define JWAP003_GPIO_WPS 11 -#define JWAP003_GPIO_I2C_SCL 0 -#define JWAP003_GPIO_I2C_SDA 1 - -static struct gpio_keys_button jwap003_gpio_keys[] __initdata = { - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = JWAP003_KEYS_DEBOUNCE_INTERVAL, - .gpio = JWAP003_GPIO_WPS, - .active_low = 1, - } -}; - -static struct i2c_gpio_platform_data jwap003_i2c_gpio_data = { - .sda_pin = JWAP003_GPIO_I2C_SDA, - .scl_pin = JWAP003_GPIO_I2C_SCL, -}; - -static struct platform_device jwap003_i2c_gpio_device = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = &jwap003_i2c_gpio_data, - } -}; - -static const char *jwap003_part_probes[] = { - "RedBoot", - NULL, -}; - -static struct flash_platform_data jwap003_flash_data = { - .part_probes = jwap003_part_probes, -}; - -#define JWAP003_WAN_PHYMASK BIT(0) -#define JWAP003_LAN_PHYMASK BIT(4) - -static void __init jwap003_init(void) -{ - ar71xx_add_device_m25p80(&jwap003_flash_data); - - ar71xx_add_device_mdio(0, 0x0); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth0_data.phy_mask = JWAP003_WAN_PHYMASK; - ar71xx_eth0_data.speed = SPEED_100; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - ar71xx_eth0_data.has_ar8216 = 1; - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth1_data.phy_mask = JWAP003_LAN_PHYMASK; - ar71xx_eth1_data.speed = SPEED_100; - ar71xx_eth1_data.duplex = DUPLEX_FULL; - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - platform_device_register(&jwap003_i2c_gpio_device); - - ar71xx_add_device_usb(); - - ar71xx_register_gpio_keys_polled(-1, JWAP003_KEYS_POLL_INTERVAL, - ARRAY_SIZE(jwap003_gpio_keys), - jwap003_gpio_keys); - - pb42_pci_init(); -} - -MIPS_MACHINE(AR71XX_MACH_JWAP003, "JWAP003", "jjPlus JWAP003", jwap003_init); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-mzk-w04nu.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-mzk-w04nu.c deleted file mode 100644 index b88edeec3f..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-mzk-w04nu.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * Planex MZK-W04NU board support - * - * Copyright (C) 2009 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-ar9xxx-wmac.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" - -#define MZK_W04NU_GPIO_LED_USB 0 -#define MZK_W04NU_GPIO_LED_STATUS 1 -#define MZK_W04NU_GPIO_LED_WPS 3 -#define MZK_W04NU_GPIO_LED_WLAN 6 -#define MZK_W04NU_GPIO_LED_AP 15 -#define MZK_W04NU_GPIO_LED_ROUTER 16 - -#define MZK_W04NU_GPIO_BTN_APROUTER 5 -#define MZK_W04NU_GPIO_BTN_WPS 12 -#define MZK_W04NU_GPIO_BTN_RESET 21 - -#define MZK_W04NU_KEYS_POLL_INTERVAL 20 /* msecs */ -#define MZK_W04NU_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W04NU_KEYS_POLL_INTERVAL) - -static struct gpio_led mzk_w04nu_leds_gpio[] __initdata = { - { - .name = "planex:green:status", - .gpio = MZK_W04NU_GPIO_LED_STATUS, - .active_low = 1, - }, { - .name = "planex:blue:wps", - .gpio = MZK_W04NU_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "planex:green:wlan", - .gpio = MZK_W04NU_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "planex:green:usb", - .gpio = MZK_W04NU_GPIO_LED_USB, - .active_low = 1, - }, { - .name = "planex:green:ap", - .gpio = MZK_W04NU_GPIO_LED_AP, - .active_low = 1, - }, { - .name = "planex:green:router", - .gpio = MZK_W04NU_GPIO_LED_ROUTER, - .active_low = 1, - } -}; - -static struct gpio_keys_button mzk_w04nu_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL, - .gpio = MZK_W04NU_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL, - .gpio = MZK_W04NU_GPIO_BTN_WPS, - .active_low = 1, - }, { - .desc = "aprouter", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL, - .gpio = MZK_W04NU_GPIO_BTN_APROUTER, - .active_low = 0, - } -}; - -#define MZK_W04NU_WAN_PHYMASK BIT(4) -#define MZK_W04NU_MDIO_MASK (~MZK_W04NU_WAN_PHYMASK) - -static void __init mzk_w04nu_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ar71xx_add_device_mdio(0, MZK_W04NU_MDIO_MASK); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth0_data.speed = SPEED_100; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - ar71xx_eth0_data.has_ar8216 = 1; - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, eeprom, 1); - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth1_data.phy_mask = MZK_W04NU_WAN_PHYMASK; - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ar71xx_add_device_m25p80(NULL); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w04nu_leds_gpio), - mzk_w04nu_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, MZK_W04NU_KEYS_POLL_INTERVAL, - ARRAY_SIZE(mzk_w04nu_gpio_keys), - mzk_w04nu_gpio_keys); - ar71xx_add_device_usb(); - - ar9xxx_add_device_wmac(eeprom, NULL); -} - -MIPS_MACHINE(AR71XX_MACH_MZK_W04NU, "MZK-W04NU", "Planex MZK-W04NU", - mzk_w04nu_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-mzk-w300nh.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-mzk-w300nh.c deleted file mode 100644 index 0ce1f194b8..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-mzk-w300nh.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * Planex MZK-W300NH board support - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ar9xxx-wmac.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" - -#define MZK_W300NH_GPIO_LED_STATUS 1 -#define MZK_W300NH_GPIO_LED_WPS 3 -#define MZK_W300NH_GPIO_LED_WLAN 6 -#define MZK_W300NH_GPIO_LED_AP_GREEN 15 -#define MZK_W300NH_GPIO_LED_AP_AMBER 16 - -#define MZK_W300NH_GPIO_BTN_APROUTER 5 -#define MZK_W300NH_GPIO_BTN_WPS 12 -#define MZK_W300NH_GPIO_BTN_RESET 21 - -#define MZK_W300NH_KEYS_POLL_INTERVAL 20 /* msecs */ -#define MZK_W300NH_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W300NH_KEYS_POLL_INTERVAL) - -static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = { - { - .name = "planex:green:status", - .gpio = MZK_W300NH_GPIO_LED_STATUS, - .active_low = 1, - }, { - .name = "planex:blue:wps", - .gpio = MZK_W300NH_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "planex:green:wlan", - .gpio = MZK_W300NH_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "planex:green:aprouter", - .gpio = MZK_W300NH_GPIO_LED_AP_GREEN, - }, { - .name = "planex:amber:aprouter", - .gpio = MZK_W300NH_GPIO_LED_AP_AMBER, - } -}; - -static struct gpio_keys_button mzk_w300nh_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = MZK_W300NH_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = MZK_W300NH_GPIO_BTN_WPS, - .active_low = 1, - }, { - .desc = "aprouter", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = MZK_W300NH_GPIO_BTN_APROUTER, - .active_low = 0, - } -}; - -#define MZK_W300NH_WAN_PHYMASK BIT(4) -#define MZK_W300NH_MDIO_MASK (~MZK_W300NH_WAN_PHYMASK) - -static void __init mzk_w300nh_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ar71xx_add_device_mdio(0, MZK_W300NH_MDIO_MASK); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth0_data.speed = SPEED_100; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - ar71xx_eth0_data.has_ar8216 = 1; - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, eeprom, 1); - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth1_data.phy_mask = MZK_W300NH_WAN_PHYMASK; - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ar71xx_add_device_m25p80(NULL); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio), - mzk_w300nh_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, MZK_W300NH_KEYS_POLL_INTERVAL, - ARRAY_SIZE(mzk_w300nh_gpio_keys), - mzk_w300nh_gpio_keys); - ar9xxx_add_device_wmac(eeprom, NULL); -} - -MIPS_MACHINE(AR71XX_MACH_MZK_W300NH, "MZK-W300NH", "Planex MZK-W300NH", - mzk_w300nh_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-nbg460n.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-nbg460n.c deleted file mode 100644 index e1d959243a..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-nbg460n.c +++ /dev/null @@ -1,225 +0,0 @@ -/* - * Zyxel NBG 460N/550N/550NH board support - * - * Copyright (C) 2010 Michael Kurz - * - * based on mach-tl-wr1043nd.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ar9xxx-wmac.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" - -/* LEDs */ -#define NBG460N_GPIO_LED_WPS 3 -#define NBG460N_GPIO_LED_WAN 6 -#define NBG460N_GPIO_LED_POWER 14 -#define NBG460N_GPIO_LED_WLAN 15 - -/* Buttons */ -#define NBG460N_GPIO_BTN_WPS 12 -#define NBG460N_GPIO_BTN_RESET 21 - -#define NBG460N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define NBG460N_KEYS_DEBOUNCE_INTERVAL (3 * NBG460N_KEYS_POLL_INTERVAL) - -/* RTC chip PCF8563 I2C interface */ -#define NBG460N_GPIO_PCF8563_SDA 8 -#define NBG460N_GPIO_PCF8563_SCK 7 - -/* Switch configuration I2C interface */ -#define NBG460N_GPIO_RTL8366_SDA 16 -#define NBG460N_GPIO_RTL8366_SCK 18 - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition nbg460n_partitions[] = { - { - .name = "Bootbase", - .offset = 0, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "U-Boot Config", - .offset = 0x010000, - .size = 0x030000, - }, { - .name = "U-Boot", - .offset = 0x040000, - .size = 0x030000, - }, { - .name = "linux", - .offset = 0x070000, - .size = 0x0e0000, - }, { - .name = "rootfs", - .offset = 0x150000, - .size = 0x2a0000, - }, { - .name = "CalibData", - .offset = 0x3f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x070000, - .size = 0x380000, - } -}; -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data nbg460n_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = nbg460n_partitions, - .nr_parts = ARRAY_SIZE(nbg460n_partitions), -#endif -}; - -static struct gpio_led nbg460n_leds_gpio[] __initdata = { - { - .name = "nbg460n:green:power", - .gpio = NBG460N_GPIO_LED_POWER, - .active_low = 0, - .default_trigger = "default-on", - }, { - .name = "nbg460n:green:wps", - .gpio = NBG460N_GPIO_LED_WPS, - .active_low = 0, - }, { - .name = "nbg460n:green:wlan", - .gpio = NBG460N_GPIO_LED_WLAN, - .active_low = 0, - }, { - /* Not really for controlling the LED, - when set low the LED blinks uncontrollable */ - .name = "nbg460n:green:wan", - .gpio = NBG460N_GPIO_LED_WAN, - .active_low = 0, - } -}; - -static struct gpio_keys_button nbg460n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL, - .gpio = NBG460N_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL, - .gpio = NBG460N_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static struct i2c_gpio_platform_data nbg460n_i2c_device_platdata = { - .sda_pin = NBG460N_GPIO_PCF8563_SDA, - .scl_pin = NBG460N_GPIO_PCF8563_SCK, - .udelay = 10, -}; - -static struct platform_device nbg460n_i2c_device = { - .name = "i2c-gpio", - .id = -1, - .num_resources = 0, - .resource = NULL, - .dev = { - .platform_data = &nbg460n_i2c_device_platdata, - }, -}; - -static struct i2c_board_info nbg460n_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, -}; - -static void __devinit nbg460n_i2c_init(void) -{ - /* The gpio interface */ - platform_device_register(&nbg460n_i2c_device); - /* I2C devices */ - i2c_register_board_info(0, nbg460n_i2c_devs, - ARRAY_SIZE(nbg460n_i2c_devs)); -} - - -static struct rtl8366_platform_data nbg460n_rtl8366s_data = { - .gpio_sda = NBG460N_GPIO_RTL8366_SDA, - .gpio_sck = NBG460N_GPIO_RTL8366_SCK, -}; - -static struct platform_device nbg460n_rtl8366s_device = { - .name = RTL8366S_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &nbg460n_rtl8366s_data, - } -}; - -static void __init nbg460n_setup(void) -{ - /* end of bootloader sector contains mac address */ - u8 *mac = (u8 *) KSEG1ADDR(0x1fc0fff8); - /* last sector contains wlan calib data */ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - /* LAN Port */ - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - ar71xx_eth0_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev; - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.speed = SPEED_1000; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - - /* WAN Port */ - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); - ar71xx_eth1_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev; - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth1_data.phy_mask = 0x10; - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - /* register the switch phy */ - platform_device_register(&nbg460n_rtl8366s_device); - - /* register flash */ - ar71xx_add_device_m25p80(&nbg460n_flash_data); - - ar9xxx_add_device_wmac(eeprom, mac); - - /* register RTC chip */ - nbg460n_i2c_init(); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(nbg460n_leds_gpio), - nbg460n_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, NBG460N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(nbg460n_gpio_keys), - nbg460n_gpio_keys); -} - -MIPS_MACHINE(AR71XX_MACH_NBG460N, "NBG460N", "Zyxel NBG460N/550N/550NH", - nbg460n_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-om2p.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-om2p.c deleted file mode 100644 index e43ad745ca..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-om2p.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * OpenMesh OM2P support - * - * Copyright (C) 2011 Marek Lindner - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include - -#include -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-ap91-pci.h" -#include "dev-m25p80.h" -#include "dev-leds-gpio.h" -#include "dev-gpio-buttons.h" - -#define OM2P_GPIO_LED_POWER 0 -#define OM2P_GPIO_LED_GREEN 13 -#define OM2P_GPIO_LED_RED 14 -#define OM2P_GPIO_LED_YELLOW 15 -#define OM2P_GPIO_LED_LAN 16 -#define OM2P_GPIO_LED_WAN 17 -#define OM2P_GPIO_BTN_RESET 11 - -#define OM2P_KEYS_POLL_INTERVAL 20 /* msecs */ -#define OM2P_KEYS_DEBOUNCE_INTERVAL (3 * OM2P_KEYS_POLL_INTERVAL) - -#define OM2P_WAN_PHYMASK BIT(4) - -static struct flash_platform_data om2p_flash_data = { - .type = "s25sl12800", - .name = "ar7240-nor0", -}; - -static struct gpio_led om2p_leds_gpio[] __initdata = { - { - .name = "om2p:blue:power", - .gpio = OM2P_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "om2p:red:wifi", - .gpio = OM2P_GPIO_LED_RED, - .active_low = 1, - }, { - .name = "om2p:yellow:wifi", - .gpio = OM2P_GPIO_LED_YELLOW, - .active_low = 1, - }, { - .name = "om2p:green:wifi", - .gpio = OM2P_GPIO_LED_GREEN, - .active_low = 1, - }, { - .name = "om2p:blue:lan", - .gpio = OM2P_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "om2p:blue:wan", - .gpio = OM2P_GPIO_LED_WAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button om2p_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = OM2P_KEYS_DEBOUNCE_INTERVAL, - .gpio = OM2P_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init om2p_setup(void) -{ - u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000); - u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN); - u8 *ee = (u8 *)KSEG1ADDR(0x1ffc1000); - - ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ar71xx_add_device_m25p80(&om2p_flash_data); - - ar71xx_add_device_mdio(0, ~OM2P_WAN_PHYMASK); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac2, 0); - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ap91_pci_init(ee, NULL); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio), - om2p_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL, - ARRAY_SIZE(om2p_gpio_keys), - om2p_gpio_keys); -} - -MIPS_MACHINE(AR71XX_MACH_OM2P, "OM2P", "OpenMesh OM2P", om2p_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-pb42.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-pb42.c deleted file mode 100644 index 1a3d8c51a2..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-pb42.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Atheros PB42 board support - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-gpio-buttons.h" -#include "dev-pb42-pci.h" -#include "dev-usb.h" - -#define PB42_KEYS_POLL_INTERVAL 20 /* msecs */ -#define PB42_KEYS_DEBOUNCE_INTERVAL (3 * PB42_KEYS_POLL_INTERVAL) - -#define PB42_GPIO_BTN_SW4 8 -#define PB42_GPIO_BTN_SW5 3 - -static struct gpio_keys_button pb42_gpio_keys[] __initdata = { - { - .desc = "sw4", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL, - .gpio = PB42_GPIO_BTN_SW4, - .active_low = 1, - }, { - .desc = "sw5", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL, - .gpio = PB42_GPIO_BTN_SW5, - .active_low = 1, - } -}; - -static const char *pb42_part_probes[] = { - "RedBoot", - NULL, -}; - -static struct flash_platform_data pb42_flash_data = { - .part_probes = pb42_part_probes, -}; - -#define PB42_WAN_PHYMASK BIT(20) -#define PB42_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19)) -#define PB42_MDIO_PHYMASK (PB42_LAN_PHYMASK | PB42_WAN_PHYMASK) - -static void __init pb42_init(void) -{ - ar71xx_add_device_m25p80(&pb42_flash_data); - - ar71xx_add_device_mdio(0, ~PB42_MDIO_PHYMASK); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ar71xx_eth0_data.phy_mask = PB42_WAN_PHYMASK; - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth1_data.speed = SPEED_100; - ar71xx_eth1_data.duplex = DUPLEX_FULL; - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ar71xx_register_gpio_keys_polled(-1, PB42_KEYS_POLL_INTERVAL, - ARRAY_SIZE(pb42_gpio_keys), - pb42_gpio_keys); - - pb42_pci_init(); -} - -MIPS_MACHINE(AR71XX_MACH_PB42, "PB42", "Atheros PB42", pb42_init); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-pb44.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-pb44.c deleted file mode 100644 index 5e013504e6..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-pb44.c +++ /dev/null @@ -1,223 +0,0 @@ -/* - * Atheros PB44 board support - * - * Copyright (C) 2009 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-pb42-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" - -#define PB44_PCF8757_VSC7395_CS 0 -#define PB44_PCF8757_STEREO_CS 1 -#define PB44_PCF8757_SLIC_CS0 2 -#define PB44_PCF8757_SLIC_TEST 3 -#define PB44_PCF8757_SLIC_INT0 4 -#define PB44_PCF8757_SLIC_INT1 5 -#define PB44_PCF8757_SW_RESET 6 -#define PB44_PCF8757_SW_JUMP 8 -#define PB44_PCF8757_LED_JUMP1 9 -#define PB44_PCF8757_LED_JUMP2 10 -#define PB44_PCF8757_TP24 11 -#define PB44_PCF8757_TP25 12 -#define PB44_PCF8757_TP26 13 -#define PB44_PCF8757_TP27 14 -#define PB44_PCF8757_TP28 15 - -#define PB44_GPIO_I2C_SCL 0 -#define PB44_GPIO_I2C_SDA 1 - -#define PB44_GPIO_EXP_BASE 16 -#define PB44_GPIO_VSC7395_CS (PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS) -#define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + PB44_PCF8757_SW_RESET) -#define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + PB44_PCF8757_SW_JUMP) -#define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + PB44_PCF8757_LED_JUMP1) -#define PB44_GPIO_LED_JUMP2 (PB44_GPIO_EXP_BASE + PB44_PCF8757_LED_JUMP2) - -#define PB44_KEYS_POLL_INTERVAL 20 /* msecs */ -#define PB44_KEYS_DEBOUNCE_INTERVAL (3 * PB44_KEYS_POLL_INTERVAL) - -static struct i2c_gpio_platform_data pb44_i2c_gpio_data = { - .sda_pin = PB44_GPIO_I2C_SDA, - .scl_pin = PB44_GPIO_I2C_SCL, -}; - -static struct platform_device pb44_i2c_gpio_device = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = &pb44_i2c_gpio_data, - } -}; - -static struct pcf857x_platform_data pb44_pcf857x_data = { - .gpio_base = PB44_GPIO_EXP_BASE, -}; - -static struct i2c_board_info pb44_i2c_board_info[] __initdata = { - { - I2C_BOARD_INFO("pcf8575", 0x20), - .platform_data = &pb44_pcf857x_data, - }, -}; - -static struct gpio_led pb44_leds_gpio[] __initdata = { - { - .name = "pb44:amber:jump1", - .gpio = PB44_GPIO_LED_JUMP1, - .active_low = 1, - }, { - .name = "pb44:green:jump2", - .gpio = PB44_GPIO_LED_JUMP2, - .active_low = 1, - }, -}; - -static struct gpio_keys_button pb44_gpio_keys[] __initdata = { - { - .desc = "soft_reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL, - .gpio = PB44_GPIO_SW_RESET, - .active_low = 1, - }, { - .desc = "jumpstart", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL, - .gpio = PB44_GPIO_SW_JUMP, - .active_low = 1, - } -}; - -static void pb44_vsc7395_reset(void) -{ - ar71xx_device_stop(RESET_MODULE_GE1_PHY); - udelay(10); - ar71xx_device_start(RESET_MODULE_GE1_PHY); - mdelay(50); -} - -static struct vsc7385_platform_data pb44_vsc7395_data = { - .reset = pb44_vsc7395_reset, - .ucode_name = "vsc7395_ucode_pb44.bin", - .mac_cfg = { - .tx_ipg = 6, - .bit2 = 1, - .clk_sel = 0, - }, -}; - -static const char *pb44_part_probes[] = { - "RedBoot", - NULL, -}; - -static struct flash_platform_data pb44_flash_data = { - .part_probes = pb44_part_probes, -}; - -static struct spi_board_info pb44_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p80", - .platform_data = &pb44_flash_data, - }, { - .bus_num = 0, - .chip_select = 1, - .max_speed_hz = 25000000, - .modalias = "spi-vsc7385", - .platform_data = &pb44_vsc7395_data, - .controller_data = (void *) PB44_GPIO_VSC7395_CS, - }, -}; - -static struct resource pb44_spi_resources[] = { - [0] = { - .start = AR71XX_SPI_BASE, - .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct ar71xx_spi_platform_data pb44_spi_data = { - .bus_num = 0, - .num_chipselect = 2, -}; - -static struct platform_device pb44_spi_device = { - .name = "pb44-spi", - .id = -1, - .resource = pb44_spi_resources, - .num_resources = ARRAY_SIZE(pb44_spi_resources), - .dev = { - .platform_data = &pb44_spi_data, - }, -}; - -#define PB44_WAN_PHYMASK BIT(0) -#define PB44_LAN_PHYMASK 0 -#define PB44_MDIO_PHYMASK (PB44_LAN_PHYMASK | PB44_WAN_PHYMASK) - -static void __init pb44_init(void) -{ - ar71xx_add_device_mdio(0, ~PB44_MDIO_PHYMASK); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.phy_mask = PB44_WAN_PHYMASK; - - ar71xx_add_device_eth(0); - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth1_data.speed = SPEED_1000; - ar71xx_eth1_data.duplex = DUPLEX_FULL; - ar71xx_eth1_pll_data.pll_1000 = 0x110000; - - ar71xx_add_device_eth(1); - - ar71xx_add_device_usb(); - - pb42_pci_init(); - - i2c_register_board_info(0, pb44_i2c_board_info, - ARRAY_SIZE(pb44_i2c_board_info)); - - platform_device_register(&pb44_i2c_gpio_device); - - spi_register_board_info(pb44_spi_info, ARRAY_SIZE(pb44_spi_info)); - platform_device_register(&pb44_spi_device); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(pb44_leds_gpio), - pb44_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, PB44_KEYS_POLL_INTERVAL, - ARRAY_SIZE(pb44_gpio_keys), - pb44_gpio_keys); -} - -MIPS_MACHINE(AR71XX_MACH_PB44, "PB44", "Atheros PB44", pb44_init); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-pb92.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-pb92.c deleted file mode 100644 index 5e680819ed..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-pb92.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * Atheros PB92 board support - * - * Copyright (C) 2010 Felix Fietkau - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-gpio-buttons.h" -#include "dev-pb9x-pci.h" -#include "dev-usb.h" - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition pb92_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x040000, - .size = 0x010000, - }, { - .name = "rootfs", - .offset = 0x050000, - .size = 0x2b0000, - }, { - .name = "uImage", - .offset = 0x300000, - .size = 0x0e0000, - }, { - .name = "ART", - .offset = 0x3e0000, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE, - } -}; -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data pb92_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = pb92_partitions, - .nr_parts = ARRAY_SIZE(pb92_partitions), -#endif -}; - -#define PB92_KEYS_POLL_INTERVAL 20 /* msecs */ -#define PB92_KEYS_DEBOUNCE_INTERVAL (3 * PB92_KEYS_POLL_INTERVAL) - -#define PB92_GPIO_BTN_SW4 8 -#define PB92_GPIO_BTN_SW5 3 - -static struct gpio_keys_button pb92_gpio_keys[] __initdata = { - { - .desc = "sw4", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL, - .gpio = PB92_GPIO_BTN_SW4, - .active_low = 1, - }, { - .desc = "sw5", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL, - .gpio = PB92_GPIO_BTN_SW5, - .active_low = 1, - } -}; - -static void __init pb92_init(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); - - ar71xx_add_device_m25p80(&pb92_flash_data); - - ar71xx_add_device_mdio(0, ~BIT(0)); - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.speed = SPEED_1000; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - ar71xx_eth0_data.phy_mask = BIT(0); - - ar71xx_add_device_eth(0); - - ar71xx_register_gpio_keys_polled(-1, PB92_KEYS_POLL_INTERVAL, - ARRAY_SIZE(pb92_gpio_keys), - pb92_gpio_keys); - - ar71xx_add_device_usb(); - - pb9x_pci_init(); -} - -MIPS_MACHINE(AR71XX_MACH_PB92, "PB92", "Atheros PB92", pb92_init); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-rb4xx.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-rb4xx.c deleted file mode 100644 index 1b9f96bcef..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-rb4xx.c +++ /dev/null @@ -1,406 +0,0 @@ -/* - * MikroTik RouterBOARD 4xx series support - * - * Copyright (C) 2008-2010 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" - -#define RB4XX_GPIO_USER_LED 4 -#define RB4XX_GPIO_RESET_SWITCH 7 - -#define RB4XX_GPIO_CPLD_BASE 32 -#define RB4XX_GPIO_CPLD_LED1 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED1) -#define RB4XX_GPIO_CPLD_LED2 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED2) -#define RB4XX_GPIO_CPLD_LED3 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED3) -#define RB4XX_GPIO_CPLD_LED4 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED4) -#define RB4XX_GPIO_CPLD_LED5 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED5) - -#define RB4XX_KEYS_POLL_INTERVAL 20 /* msecs */ -#define RB4XX_KEYS_DEBOUNCE_INTERVAL (3 * RB4XX_KEYS_POLL_INTERVAL) - -static struct gpio_led rb4xx_leds_gpio[] __initdata = { - { - .name = "rb4xx:yellow:user", - .gpio = RB4XX_GPIO_USER_LED, - .active_low = 0, - }, { - .name = "rb4xx:green:led1", - .gpio = RB4XX_GPIO_CPLD_LED1, - .active_low = 1, - }, { - .name = "rb4xx:green:led2", - .gpio = RB4XX_GPIO_CPLD_LED2, - .active_low = 1, - }, { - .name = "rb4xx:green:led3", - .gpio = RB4XX_GPIO_CPLD_LED3, - .active_low = 1, - }, { - .name = "rb4xx:green:led4", - .gpio = RB4XX_GPIO_CPLD_LED4, - .active_low = 1, - }, { - .name = "rb4xx:green:led5", - .gpio = RB4XX_GPIO_CPLD_LED5, - .active_low = 0, - }, -}; - -static struct gpio_keys_button rb4xx_gpio_keys[] __initdata = { - { - .desc = "reset_switch", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = RB4XX_KEYS_DEBOUNCE_INTERVAL, - .gpio = RB4XX_GPIO_RESET_SWITCH, - .active_low = 1, - } -}; - -static struct platform_device rb4xx_nand_device = { - .name = "rb4xx-nand", - .id = -1, -}; - -static struct ar71xx_pci_irq rb4xx_pci_irqs[] __initdata = { - { - .slot = 0, - .pin = 1, - .irq = AR71XX_PCI_IRQ_DEV2, - }, { - .slot = 1, - .pin = 1, - .irq = AR71XX_PCI_IRQ_DEV0, - }, { - .slot = 1, - .pin = 2, - .irq = AR71XX_PCI_IRQ_DEV1, - }, { - .slot = 2, - .pin = 1, - .irq = AR71XX_PCI_IRQ_DEV1, - }, { - .slot = 3, - .pin = 1, - .irq = AR71XX_PCI_IRQ_DEV2, - } -}; - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition rb4xx_partitions[] = { - { - .name = "routerboot", - .offset = 0, - .size = 0x0b000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "hard_config", - .offset = 0x0b000, - .size = 0x01000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "bios", - .offset = 0x0d000, - .size = 0x02000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "soft_config", - .offset = 0x0f000, - .size = 0x01000, - } -}; -#define rb4xx_num_partitions ARRAY_SIZE(rb4xx_partitions) -#else /* CONFIG_MTD_PARTITIONS */ -#define rb4xx_partitions NULL -#define rb4xx_num_partitions 0 -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data rb4xx_flash_data = { - .type = "pm25lv512", - .parts = rb4xx_partitions, - .nr_parts = rb4xx_num_partitions, -}; - -static struct rb4xx_cpld_platform_data rb4xx_cpld_data = { - .gpio_base = RB4XX_GPIO_CPLD_BASE, -}; - -static struct mmc_spi_platform_data rb4xx_mmc_data = { - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, -}; - -static struct spi_board_info rb4xx_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p80", - .platform_data = &rb4xx_flash_data, - }, { - .bus_num = 0, - .chip_select = 1, - .max_speed_hz = 25000000, - .modalias = "spi-rb4xx-cpld", - .platform_data = &rb4xx_cpld_data, - } -}; - -static struct spi_board_info rb4xx_microsd_info[] = { - { - .bus_num = 0, - .chip_select = 2, - .max_speed_hz = 25000000, - .modalias = "mmc_spi", - .platform_data = &rb4xx_mmc_data, - } -}; - - -static struct resource rb4xx_spi_resources[] = { - { - .start = AR71XX_SPI_BASE, - .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device rb4xx_spi_device = { - .name = "rb4xx-spi", - .id = -1, - .resource = rb4xx_spi_resources, - .num_resources = ARRAY_SIZE(rb4xx_spi_resources), -}; - -static void __init rb4xx_generic_setup(void) -{ - ar71xx_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN | - AR71XX_GPIO_FUNC_SPI_CS2_EN); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio), - rb4xx_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, RB4XX_KEYS_POLL_INTERVAL, - ARRAY_SIZE(rb4xx_gpio_keys), - rb4xx_gpio_keys); - - spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info)); - platform_device_register(&rb4xx_spi_device); - platform_device_register(&rb4xx_nand_device); -} - -static void __init rb411_setup(void) -{ - rb4xx_generic_setup(); - spi_register_board_info(rb4xx_microsd_info, - ARRAY_SIZE(rb4xx_microsd_info)); - - ar71xx_add_device_mdio(0, 0xfffffffc); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ar71xx_eth0_data.phy_mask = 0x00000003; - - ar71xx_add_device_eth(0); - - ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); -} - -MIPS_MACHINE(AR71XX_MACH_RB_411, "411", "MikroTik RouterBOARD 411/A/AH", - rb411_setup); - -static void __init rb411u_setup(void) -{ - rb411_setup(); - ar71xx_add_device_usb(); -} - -MIPS_MACHINE(AR71XX_MACH_RB_411U, "411U", "MikroTik RouterBOARD 411U", - rb411u_setup); - -#define RB433_LAN_PHYMASK BIT(0) -#define RB433_WAN_PHYMASK BIT(4) -#define RB433_MDIO_PHYMASK (RB433_LAN_PHYMASK | RB433_WAN_PHYMASK) - -static void __init rb433_setup(void) -{ - rb4xx_generic_setup(); - spi_register_board_info(rb4xx_microsd_info, - ARRAY_SIZE(rb4xx_microsd_info)); - - ar71xx_add_device_mdio(0, ~RB433_MDIO_PHYMASK); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 1); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ar71xx_eth0_data.phy_mask = RB433_LAN_PHYMASK; - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 0); - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth1_data.phy_mask = RB433_WAN_PHYMASK; - - ar71xx_add_device_eth(1); - ar71xx_add_device_eth(0); - - ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); -} - -MIPS_MACHINE(AR71XX_MACH_RB_433, "433", "MikroTik RouterBOARD 433/AH", - rb433_setup); - -static void __init rb433u_setup(void) -{ - rb433_setup(); - ar71xx_add_device_usb(); -} - -MIPS_MACHINE(AR71XX_MACH_RB_433U, "433U", "MikroTik RouterBOARD 433UAH", - rb433u_setup); - -#define RB450_LAN_PHYMASK BIT(0) -#define RB450_WAN_PHYMASK BIT(4) -#define RB450_MDIO_PHYMASK (RB450_LAN_PHYMASK | RB450_WAN_PHYMASK) - -static void __init rb450_generic_setup(int gige) -{ - rb4xx_generic_setup(); - ar71xx_add_device_mdio(0, ~RB450_MDIO_PHYMASK); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 1); - ar71xx_eth0_data.phy_if_mode = (gige) ? - PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII; - ar71xx_eth0_data.phy_mask = RB450_LAN_PHYMASK; - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 0); - ar71xx_eth1_data.phy_if_mode = (gige) ? - PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII; - ar71xx_eth1_data.phy_mask = RB450_WAN_PHYMASK; - - ar71xx_add_device_eth(1); - ar71xx_add_device_eth(0); -} - -static void __init rb450_setup(void) -{ - rb450_generic_setup(0); -} - -MIPS_MACHINE(AR71XX_MACH_RB_450, "450", "MikroTik RouterBOARD 450", - rb450_setup); - -static void __init rb450g_setup(void) -{ - rb450_generic_setup(1); - spi_register_board_info(rb4xx_microsd_info, - ARRAY_SIZE(rb4xx_microsd_info)); -} - -MIPS_MACHINE(AR71XX_MACH_RB_450G, "450G", "MikroTik RouterBOARD 450G", - rb450g_setup); - -static void __init rb493_setup(void) -{ - rb4xx_generic_setup(); - - ar71xx_add_device_mdio(0, 0x3fffff00); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ar71xx_eth0_data.speed = SPEED_100; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth1_data.phy_mask = 0x00000001; - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); -} - -MIPS_MACHINE(AR71XX_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH", - rb493_setup); - -#define RB493G_GPIO_MDIO_MDC 7 -#define RB493G_GPIO_MDIO_DATA 8 - -#define RB493G_MDIO_PHYMASK BIT(0) - -static struct mdio_gpio_platform_data rb493g_mdio_data = { - .mdc = RB493G_GPIO_MDIO_MDC, - .mdio = RB493G_GPIO_MDIO_DATA, - - .phy_mask = ~RB493G_MDIO_PHYMASK, -}; - -static struct platform_device rb493g_mdio_device = { - .name = "mdio-gpio", - .id = -1, - .dev = { - .platform_data = &rb493g_mdio_data, - }, -}; - -static void __init rb493g_setup(void) -{ - ar71xx_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN | - AR71XX_GPIO_FUNC_SPI_CS2_EN); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio), - rb4xx_leds_gpio); - - spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info)); - platform_device_register(&rb4xx_spi_device); - platform_device_register(&rb4xx_nand_device); - - ar71xx_add_device_mdio(0, ~RB493G_MDIO_PHYMASK); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.phy_mask = RB493G_MDIO_PHYMASK; - ar71xx_eth0_data.speed = SPEED_1000; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth1_data.mii_bus_dev = &rb493g_mdio_device.dev; - ar71xx_eth1_data.phy_mask = RB493G_MDIO_PHYMASK; - ar71xx_eth1_data.speed = SPEED_1000; - ar71xx_eth1_data.duplex = DUPLEX_FULL; - - - platform_device_register(&rb493g_mdio_device); - - ar71xx_add_device_eth(1); - ar71xx_add_device_eth(0); - - ar71xx_add_device_usb(); - - ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); -} - -MIPS_MACHINE(AR71XX_MACH_RB_493G, "493G", "MikroTik RouterBOARD 493G", - rb493g_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-rb750.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-rb750.c deleted file mode 100644 index 9b63dc3688..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-rb750.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * MikroTik RouterBOARD 750 support - * - * Copyright (C) 2010 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include - -#include "machtype.h" -#include "devices.h" - -static struct rb750_led_data rb750_leds[] = { - { - .name = "rb750:green:act", - .mask = RB750_LED_ACT, - .active_low = 1, - }, { - .name = "rb750:green:port1", - .mask = RB750_LED_PORT5, - .active_low = 1, - }, { - .name = "rb750:green:port2", - .mask = RB750_LED_PORT4, - .active_low = 1, - }, { - .name = "rb750:green:port3", - .mask = RB750_LED_PORT3, - .active_low = 1, - }, { - .name = "rb750:green:port4", - .mask = RB750_LED_PORT2, - .active_low = 1, - }, { - .name = "rb750:green:port5", - .mask = RB750_LED_PORT1, - .active_low = 1, - } -}; - -static struct rb750_led_platform_data rb750_leds_data = { - .num_leds = ARRAY_SIZE(rb750_leds), - .leds = rb750_leds, -}; - -static struct platform_device rb750_leds_device = { - .name = "leds-rb750", - .dev = { - .platform_data = &rb750_leds_data, - } -}; - -static struct platform_device rb750_nand_device = { - .name = "rb750-nand", - .id = -1, -}; - -int rb750_latch_change(u32 mask_clr, u32 mask_set) -{ - static DEFINE_SPINLOCK(lock); - static u32 latch_set = RB750_LED_BITS | RB750_LVC573_LE; - static u32 latch_oe; - static u32 latch_clr; - unsigned long flags; - u32 t; - int ret = 0; - - spin_lock_irqsave(&lock, flags); - - if ((mask_clr & BIT(31)) != 0 && - (latch_set & RB750_LVC573_LE) == 0) { - goto unlock; - } - - latch_set = (latch_set | mask_set) & ~mask_clr; - latch_clr = (latch_clr | mask_clr) & ~mask_set; - - if (latch_oe == 0) - latch_oe = __raw_readl(ar71xx_gpio_base + AR71XX_GPIO_REG_OE); - - if (likely(latch_set & RB750_LVC573_LE)) { - void __iomem *base = ar71xx_gpio_base; - - t = __raw_readl(base + AR71XX_GPIO_REG_OE); - t |= mask_clr | latch_oe | mask_set; - - __raw_writel(t, base + AR71XX_GPIO_REG_OE); - __raw_writel(latch_clr, base + AR71XX_GPIO_REG_CLEAR); - __raw_writel(latch_set, base + AR71XX_GPIO_REG_SET); - } else if (mask_clr & RB750_LVC573_LE) { - void __iomem *base = ar71xx_gpio_base; - - latch_oe = __raw_readl(base + AR71XX_GPIO_REG_OE); - __raw_writel(RB750_LVC573_LE, base + AR71XX_GPIO_REG_CLEAR); - /* flush write */ - __raw_readl(base + AR71XX_GPIO_REG_CLEAR); - } - - ret = 1; - -unlock: - spin_unlock_irqrestore(&lock, flags); - return ret; -} -EXPORT_SYMBOL_GPL(rb750_latch_change); - -static void __init rb750_setup(void) -{ - ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); - - ar71xx_add_device_mdio(0, 0x0); - - /* LAN ports */ - ar71xx_add_device_eth(1); - - /* WAN port */ - ar71xx_add_device_eth(0); - - platform_device_register(&rb750_leds_device); - platform_device_register(&rb750_nand_device); -} - -MIPS_MACHINE(AR71XX_MACH_RB_750, "750i", "MikroTik RouterBOARD 750", - rb750_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-rw2458n.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-rw2458n.c deleted file mode 100644 index 02b655f135..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-rw2458n.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Redwave RW2458N support - * - * Copyright (C) 2011-2012 Cezary Jackiewicz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ap91-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" - -#define RW2458N_GPIO_LED_D3 1 -#define RW2458N_GPIO_LED_D4 0 -#define RW2458N_GPIO_LED_D5 11 -#define RW2458N_GPIO_LED_D6 7 -#define RW2458N_GPIO_BTN_RESET 12 - -#define RW2458N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define RW2458N_KEYS_DEBOUNCE_INTERVAL (3 * RW2458N_KEYS_POLL_INTERVAL) - -static struct gpio_keys_button rw2458n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = RW2458N_KEYS_DEBOUNCE_INTERVAL, - .gpio = RW2458N_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -#define RW2458N_WAN_PHYMASK BIT(4) - -static struct gpio_led rw2458n_leds_gpio[] __initdata = { - { - .name = "rw2458n:green:d3", - .gpio = RW2458N_GPIO_LED_D3, - .active_low = 1, - }, { - .name = "rw2458n:green:d4", - .gpio = RW2458N_GPIO_LED_D4, - .active_low = 1, - }, { - .name = "rw2458n:green:d5", - .gpio = RW2458N_GPIO_LED_D5, - .active_low = 1, - }, { - .name = "rw2458n:green:d6", - .gpio = RW2458N_GPIO_LED_D6, - .active_low = 1, - } -}; - -static const char *rw2458n_part_probes[] = { - "RedBoot", - NULL, -}; - -static struct flash_platform_data rw2458n_flash_data = { - .part_probes = rw2458n_part_probes, -}; - -static void __init rw2458n_setup(void) -{ - u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ar71xx_add_device_m25p80(&rw2458n_flash_data); - - ar71xx_add_device_mdio(0, ~RW2458N_WAN_PHYMASK); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac2, 0); - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ap91_pci_init(ee, NULL); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rw2458n_leds_gpio), - rw2458n_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, RW2458N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(rw2458n_gpio_keys), - rw2458n_gpio_keys); - - ar71xx_add_device_usb(); -} - -MIPS_MACHINE(AR71XX_MACH_RW2458N, "RW2458N", "Redwave RW2458N", - rw2458n_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tew-632brp.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tew-632brp.c deleted file mode 100644 index b7f9cb683d..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tew-632brp.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * TrendNET TEW-632BRP board support - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ar9xxx-wmac.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "nvram.h" - -#define TEW_632BRP_GPIO_LED_STATUS 1 -#define TEW_632BRP_GPIO_LED_WPS 3 -#define TEW_632BRP_GPIO_LED_WLAN 6 -#define TEW_632BRP_GPIO_BTN_WPS 12 -#define TEW_632BRP_GPIO_BTN_RESET 21 - -#define TEW_632BRP_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TEW_632BRP_KEYS_DEBOUNCE_INTERVAL (3 * TEW_632BRP_KEYS_POLL_INTERVAL) - -#define TEW_632BRP_CONFIG_ADDR 0x1f020000 -#define TEW_632BRP_CONFIG_SIZE 0x10000 - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition tew_632brp_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "config", - .offset = 0x020000, - .size = 0x010000, - }, { - .name = "kernel", - .offset = 0x030000, - .size = 0x0e0000, - }, { - .name = "rootfs", - .offset = 0x110000, - .size = 0x2e0000, - }, { - .name = "art", - .offset = 0x3f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x030000, - .size = 0x3c0000, - } -}; -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data tew_632brp_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = tew_632brp_partitions, - .nr_parts = ARRAY_SIZE(tew_632brp_partitions), -#endif -}; - -static struct gpio_led tew_632brp_leds_gpio[] __initdata = { - { - .name = "tew-632brp:green:status", - .gpio = TEW_632BRP_GPIO_LED_STATUS, - .active_low = 1, - }, { - .name = "tew-632brp:blue:wps", - .gpio = TEW_632BRP_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "tew-632brp:green:wlan", - .gpio = TEW_632BRP_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button tew_632brp_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW_632BRP_GPIO_BTN_RESET, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW_632BRP_GPIO_BTN_WPS, - } -}; - -#define TEW_632BRP_LAN_PHYMASK BIT(0) -#define TEW_632BRP_WAN_PHYMASK BIT(4) -#define TEW_632BRP_MDIO_MASK (~(TEW_632BRP_LAN_PHYMASK | \ - TEW_632BRP_WAN_PHYMASK)) - -static void __init tew_632brp_setup(void) -{ - const char *config = (char *) KSEG1ADDR(TEW_632BRP_CONFIG_ADDR); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - u8 mac[6]; - u8 *wlan_mac = NULL; - - if (nvram_parse_mac_addr(config, TEW_632BRP_CONFIG_SIZE, - "lan_mac=", mac) == 0) { - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); - wlan_mac = mac; - } - - ar71xx_add_device_mdio(0, TEW_632BRP_MDIO_MASK); - - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth0_data.phy_mask = TEW_632BRP_LAN_PHYMASK; - - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth1_data.phy_mask = TEW_632BRP_WAN_PHYMASK; - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ar71xx_add_device_m25p80(&tew_632brp_flash_data); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio), - tew_632brp_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, TEW_632BRP_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tew_632brp_gpio_keys), - tew_632brp_gpio_keys); - - ar9xxx_add_device_wmac(eeprom, wlan_mac); -} - -MIPS_MACHINE(AR71XX_MACH_TEW_632BRP, "TEW-632BRP", "TRENDnet TEW-632BRP", - tew_632brp_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tew-673gru.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tew-673gru.c deleted file mode 100644 index f1d26e6eaa..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tew-673gru.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * TRENDnet TEW-673GRU board support - * - * Copyright (C) 2012 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ap94-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" - -#define TEW673GRU_GPIO_LCD_SCK 0 -#define TEW673GRU_GPIO_LCD_MOSI 1 -#define TEW673GRU_GPIO_LCD_MISO 2 -#define TEW673GRU_GPIO_LCD_CS 6 - -#define TEW673GRU_GPIO_LED_WPS 9 - -#define TEW673GRU_GPIO_BTN_RESET 3 -#define TEW673GRU_GPIO_BTN_WPS 8 - -#define TEW673GRU_GPIO_RTL8366_SDA 5 -#define TEW673GRU_GPIO_RTL8366_SCK 7 - -#define TEW673GRU_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TEW673GRU_KEYS_DEBOUNCE_INTERVAL (3 * TEW673GRU_KEYS_POLL_INTERVAL) - -#define TEW673GRU_CAL_LOCATION_0 0x1f661000 -#define TEW673GRU_CAL_LOCATION_1 0x1f665000 -#define TEW673GRU_MAC_LOCATION_0 0x1f66ffa0 -#define TEW673GRU_MAC_LOCATION_1 0x1f66ffb4 - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition tew673gru_partitions[] = { - { - .name = "uboot", - .offset = 0, - .size = 0x040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "config", - .offset = 0x040000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x050000, - .size = 0x610000, - }, { - .name = "caldata", - .offset = 0x660000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "unknown", - .offset = 0x670000, - .size = 0x190000, - .mask_flags = MTD_WRITEABLE, - } -}; -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data tew673gru_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = tew673gru_partitions, - .nr_parts = ARRAY_SIZE(tew673gru_partitions), -#endif -}; - -static struct gpio_led tew673gru_leds_gpio[] __initdata = { - { - .name = "trendnet:blue:wps", - .gpio = TEW673GRU_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button tew673gru_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TEW673GRU_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW673GRU_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TEW673GRU_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW673GRU_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static struct rtl8366_initval tew673gru_rtl8366s_initvals[] = { - { .reg = 0x06, .val = 0x0108 }, -}; - -static struct rtl8366_platform_data tew673gru_rtl8366s_data = { - .gpio_sda = TEW673GRU_GPIO_RTL8366_SDA, - .gpio_sck = TEW673GRU_GPIO_RTL8366_SCK, - .num_initvals = ARRAY_SIZE(tew673gru_rtl8366s_initvals), - .initvals = tew673gru_rtl8366s_initvals, -}; - -static struct platform_device tew673gru_rtl8366s_device = { - .name = RTL8366S_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &tew673gru_rtl8366s_data, - } -}; - -static struct spi_board_info tew673gru_spi_info[] = { - { - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 400000, - .modalias = "spidev", - .mode = SPI_MODE_2, - .controller_data = (void *) TEW673GRU_GPIO_LCD_CS, - }, -}; - -static struct spi_gpio_platform_data tew673gru_spi_data = { - .sck = TEW673GRU_GPIO_LCD_SCK, - .miso = TEW673GRU_GPIO_LCD_MISO, - .mosi = TEW673GRU_GPIO_LCD_MOSI, - .num_chipselect = 1, -}; - -static struct platform_device tew673gru_spi_device = { - .name = "spi_gpio", - .id = 1, - .dev = { - .platform_data = &tew673gru_spi_data, - }, -}; - -static void tew673gru_read_ascii_mac(u8 *dest, unsigned int src_addr) -{ - int ret; - u8 *src = (u8 *)KSEG1ADDR(src_addr); - - ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", - &dest[0], &dest[1], &dest[2], - &dest[3], &dest[4], &dest[5]); - - if (ret != ETH_ALEN) memset(dest, 0, ETH_ALEN); -} - -static void __init tew673gru_setup(void) -{ - u8 mac1[ETH_ALEN], mac2[ETH_ALEN]; - - tew673gru_read_ascii_mac(mac1, TEW673GRU_MAC_LOCATION_0); - tew673gru_read_ascii_mac(mac2, TEW673GRU_MAC_LOCATION_1); - - ar71xx_add_device_mdio(0, 0x0); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 2); - ar71xx_eth0_data.mii_bus_dev = &tew673gru_rtl8366s_device.dev; - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.speed = SPEED_1000; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - ar71xx_eth0_pll_data.pll_1000 = 0x11110000; - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac1, 3); - ar71xx_eth1_data.mii_bus_dev = &tew673gru_rtl8366s_device.dev; - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth1_data.phy_mask = 0x10; - ar71xx_eth1_pll_data.pll_1000 = 0x11110000; - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ar71xx_add_device_m25p80(&tew673gru_flash_data); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tew673gru_leds_gpio), - tew673gru_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, TEW673GRU_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tew673gru_gpio_keys), - tew673gru_gpio_keys); - - ar71xx_add_device_usb(); - - platform_device_register(&tew673gru_rtl8366s_device); - - ap94_pci_setup_wmac_led_pin(0, 5); - ap94_pci_setup_wmac_led_pin(1, 5); - - ap94_pci_init((u8 *) KSEG1ADDR(TEW673GRU_CAL_LOCATION_0), mac1, - (u8 *) KSEG1ADDR(TEW673GRU_CAL_LOCATION_1), mac2); - - spi_register_board_info(tew673gru_spi_info, - ARRAY_SIZE(tew673gru_spi_info)); - platform_device_register(&tew673gru_spi_device); -} - -MIPS_MACHINE(AR71XX_MACH_TEW_673GRU, "TEW-673GRU", "TRENDnet TEW-673GRU", - tew673gru_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-mr11u.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-mr11u.c deleted file mode 100644 index 427af169fc..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-mr11u.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * TP-LINK TL-MR11U board support - * - * Copyright (C) 2011 dongyuqi <729650915@qq.com> - * Copyright (C) 2011 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-ar9xxx-wmac.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" - -#define TL_MR11U_GPIO_LED_3G 27 -#define TL_MR11U_GPIO_LED_WLAN 26 -#define TL_MR11U_GPIO_LED_LAN 17 - -#define TL_MR11U_GPIO_BTN_WPS 20 -#define TL_MR11U_GPIO_BTN_RESET 11 - -#define TL_MR11U_GPIO_USB_POWER 8 - -#define TL_MR11U_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_MR11U_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR11U_KEYS_POLL_INTERVAL) - -static const char *tl_mr11u_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_mr11u_flash_data = { - .part_probes = tl_mr11u_part_probes, -}; - -static struct gpio_led tl_mr11u_leds_gpio[] __initdata = { - { - .name = "tp-link:green:3g", - .gpio = TL_MR11U_GPIO_LED_3G, - .active_low = 1, - }, - { - .name = "tp-link:green:wlan", - .gpio = TL_MR11U_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "tp-link:green:lan", - .gpio = TL_MR11U_GPIO_LED_LAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_mr11u_gpio_keys[] __initdata = { - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR11U_GPIO_BTN_WPS, - .active_low = 0, - }, - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR11U_GPIO_BTN_RESET, - .active_low = 0, - } -}; - -static void __init tl_mr11u_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ar71xx_add_device_m25p80(&tl_mr11u_flash_data); - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_mr11u_leds_gpio), - tl_mr11u_leds_gpio); - ar71xx_register_gpio_keys_polled(-1, TL_MR11U_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_mr11u_gpio_keys), - tl_mr11u_gpio_keys); - - gpio_request(TL_MR11U_GPIO_USB_POWER, "USB power"); - gpio_direction_output(TL_MR11U_GPIO_USB_POWER, 1); - ar71xx_add_device_usb(); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - - ar71xx_add_device_mdio(0, 0x0); - ar71xx_add_device_eth(0); - - ar9xxx_add_device_wmac(ee, mac); -} - -MIPS_MACHINE(AR71XX_MACH_TL_MR11U, "TL-MR11U", "TP-LINK TL-MR11U", - tl_mr11u_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-mr3020.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-mr3020.c deleted file mode 100644 index cccb4d4b03..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-mr3020.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * TP-LINK TL-MR3020 board support - * - * Copyright (C) 2011 dongyuqi <729650915@qq.com> - * Copyright (C) 2011 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-ar9xxx-wmac.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" - -#define TL_MR3020_GPIO_LED_3G 27 -#define TL_MR3020_GPIO_LED_WLAN 0 -#define TL_MR3020_GPIO_LED_LAN 17 -#define TL_MR3020_GPIO_LED_WPS 26 - -#define TL_MR3020_GPIO_BTN_WPS 11 -#define TL_MR3020_GPIO_BTN_SW1 18 -#define TL_MR3020_GPIO_BTN_SW2 20 - -#define TL_MR3020_GPIO_USB_POWER 8 - -#define TL_MR3020_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_MR3020_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3020_KEYS_POLL_INTERVAL) - -static const char *tl_mr3020_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_mr3020_flash_data = { - .part_probes = tl_mr3020_part_probes, -}; - -static struct gpio_led tl_mr3020_leds_gpio[] __initdata = { - { - .name = "tp-link:green:3g", - .gpio = TL_MR3020_GPIO_LED_3G, - .active_low = 1, - }, - { - .name = "tp-link:green:wlan", - .gpio = TL_MR3020_GPIO_LED_WLAN, - .active_low = 0, - }, - { - .name = "tp-link:green:lan", - .gpio = TL_MR3020_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "tp-link:green:wps", - .gpio = TL_MR3020_GPIO_LED_WPS, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_mr3020_gpio_keys[] __initdata = { - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR3020_GPIO_BTN_WPS, - .active_low = 0, - }, - { - .desc = "sw1", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR3020_GPIO_BTN_SW1, - .active_low = 0, - }, - { - .desc = "sw2", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR3020_GPIO_BTN_SW2, - .active_low = 0, - } -}; - -static void __init tl_mr3020_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ar71xx_add_device_m25p80(&tl_mr3020_flash_data); - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_mr3020_leds_gpio), - tl_mr3020_leds_gpio); - ar71xx_register_gpio_keys_polled(-1, TL_MR3020_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_mr3020_gpio_keys), - tl_mr3020_gpio_keys); - - gpio_request(TL_MR3020_GPIO_USB_POWER, "USB power"); - gpio_direction_output(TL_MR3020_GPIO_USB_POWER, 1); - ar71xx_add_device_usb(); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - - ar71xx_add_device_mdio(0, 0x0); - ar71xx_add_device_eth(0); - - ar9xxx_add_device_wmac(ee, mac); -} - -MIPS_MACHINE(AR71XX_MACH_TL_MR3020, "TL-MR3020", "TP-LINK TL-MR3020", - tl_mr3020_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-mr3x20.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-mr3x20.c deleted file mode 100644 index 5ee25d346c..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-mr3x20.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * TP-LINK TL-MR3220/3420 board support - * - * Copyright (C) 2010 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ap91-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" - -#define TL_MR3X20_GPIO_LED_QSS 0 -#define TL_MR3X20_GPIO_LED_SYSTEM 1 -#define TL_MR3X20_GPIO_LED_3G 8 - -#define TL_MR3X20_GPIO_BTN_RESET 11 -#define TL_MR3X20_GPIO_BTN_QSS 12 - -#define TL_MR3X20_GPIO_USB_POWER 6 - -#define TL_MR3X20_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_MR3X20_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3X20_KEYS_POLL_INTERVAL) - -static const char *tl_mr3x20_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_mr3x20_flash_data = { - .part_probes = tl_mr3x20_part_probes, -}; - -static struct gpio_led tl_mr3x20_leds_gpio[] __initdata = { - { - .name = "tp-link:green:system", - .gpio = TL_MR3X20_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_MR3X20_GPIO_LED_QSS, - .active_low = 1, - }, { - .name = "tp-link:green:3g", - .gpio = TL_MR3X20_GPIO_LED_3G, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_mr3x20_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR3X20_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR3X20_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static void __init tl_ap99_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ar71xx_add_device_m25p80(&tl_mr3x20_flash_data); - - ar71xx_register_gpio_keys_polled(-1, TL_MR3X20_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_mr3x20_gpio_keys), - tl_mr3x20_gpio_keys); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 1); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, -1); - - ar71xx_add_device_mdio(0, 0x0); - - /* LAN ports */ - ar71xx_add_device_eth(1); - /* WAN port */ - ar71xx_add_device_eth(0); - - ap91_pci_init(ee, mac); -} - -static void __init tl_mr3x20_usb_setup(void) -{ - /* enable power for the USB port */ - gpio_request(TL_MR3X20_GPIO_USB_POWER, "USB power"); - gpio_direction_output(TL_MR3X20_GPIO_USB_POWER, 1); - - ar71xx_add_device_usb(); -} - -static void __init tl_mr3220_setup(void) -{ - tl_ap99_setup(); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio), - tl_mr3x20_leds_gpio); - ap91_pci_setup_wmac_led_pin(1); - tl_mr3x20_usb_setup(); -} - -MIPS_MACHINE(AR71XX_MACH_TL_MR3220, "TL-MR3220", "TP-LINK TL-MR3220", - tl_mr3220_setup); - -static void __init tl_mr3420_setup(void) -{ - tl_ap99_setup(); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio), - tl_mr3x20_leds_gpio); - ap91_pci_setup_wmac_led_pin(0); - tl_mr3x20_usb_setup(); -} - -MIPS_MACHINE(AR71XX_MACH_TL_MR3420, "TL-MR3420", "TP-LINK TL-MR3420", - tl_mr3420_setup); - -static void __init tl_wr841n_v7_setup(void) -{ - tl_ap99_setup(); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio) - 1, - tl_mr3x20_leds_gpio); - ap91_pci_setup_wmac_led_pin(0); -} - -MIPS_MACHINE(AR71XX_MACH_TL_WR841N_V7, "TL-WR841N-v7", - "TP-LINK TL-WR841N/ND v7", tl_wr841n_v7_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd-v2.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd-v2.c deleted file mode 100644 index 7d9bbee835..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd-v2.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * TP-LINK TL-WA901ND v2 board support - * - * Copyright (C) 2009-2010 Gabor Juhos - * Copyright (C) 2010 Pieter Hollants - * Copyright (C) 2011 Jonathan Bennett - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-ar9xxx-wmac.h" - -#define TL_WA901ND_V2_GPIO_LED_QSS 4 -#define TL_WA901ND_V2_GPIO_LED_SYSTEM 2 -#define TL_WA901ND_V2_GPIO_LED_WLAN 9 - - -#define TL_WA901ND_V2_GPIO_BTN_RESET 3 -#define TL_WA901ND_V2_GPIO_BTN_QSS 7 - -#define TL_WA901ND_V2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL \ - (3 * TL_WA901ND_V2_KEYS_POLL_INTERVAL) - -static const char *tl_wa901nd_v2_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wa901nd_v2_flash_data = { - .part_probes = tl_wa901nd_v2_part_probes, -}; - -static struct gpio_led tl_wa901nd_v2_leds_gpio[] __initdata = { - { - .name = "tp-link:green:system", - .gpio = TL_WA901ND_V2_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WA901ND_V2_GPIO_LED_QSS, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WA901ND_V2_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_wa901nd_v2_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA901ND_V2_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA901ND_V2_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static void __init tl_wa901nd_v2_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ar71xx_eth0_data.phy_mask = 0x00001000; - ar71xx_add_device_mdio(0, 0x0); - - ar71xx_eth0_data.reset_bit = RESET_MODULE_GE0_MAC | - RESET_MODULE_GE0_PHY; - ar71xx_add_device_eth(0); - - ar71xx_add_device_m25p80(&tl_wa901nd_v2_flash_data); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_v2_leds_gpio), - tl_wa901nd_v2_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, TL_WA901ND_V2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wa901nd_v2_gpio_keys), - tl_wa901nd_v2_gpio_keys); - - ar9xxx_add_device_wmac(eeprom, mac); -} - -MIPS_MACHINE(AR71XX_MACH_TL_WA901ND_V2, "TL-WA901ND-v2", - "TP-LINK TL-WA901ND v2", tl_wa901nd_v2_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd.c deleted file mode 100644 index 056f35ab75..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * TP-LINK TL-WA901ND board support - * - * Copyright (C) 2009-2010 Gabor Juhos - * Copyright (C) 2010 Pieter Hollants - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ap91-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" - -#define TL_WA901ND_GPIO_LED_QSS 0 -#define TL_WA901ND_GPIO_LED_SYSTEM 1 -#define TL_WA901ND_GPIO_LED_LAN 13 - -#define TL_WA901ND_GPIO_BTN_RESET 11 -#define TL_WA901ND_GPIO_BTN_QSS 12 - -#define TL_WA901ND_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WA901ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA901ND_KEYS_POLL_INTERVAL) - -static const char *tl_wa901nd_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wa901nd_flash_data = { - .part_probes = tl_wa901nd_part_probes, -}; - -static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan", - .gpio = TL_WA901ND_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "tp-link:green:system", - .gpio = TL_WA901ND_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WA901ND_GPIO_LED_QSS, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_wa901nd_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA901ND_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA901ND_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static void __init tl_wa901nd_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - /* - * ar71xx_eth0 would be the WAN port, but is not connected on - * the TL-WA901ND. ar71xx_eth1 connects to the internal switch chip, - * however we have a single LAN port only. - */ - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 0); - ar71xx_add_device_mdio(0, 0x0); - ar71xx_add_device_eth(1); - - ar71xx_add_device_m25p80(&tl_wa901nd_flash_data); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio), - tl_wa901nd_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, TL_WA901ND_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wa901nd_gpio_keys), - tl_wa901nd_gpio_keys); - - ap91_pci_init(ee, mac); -} - -MIPS_MACHINE(AR71XX_MACH_TL_WA901ND, "TL-WA901ND", "TP-LINK TL-WA901ND", - tl_wa901nd_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr1043nd.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr1043nd.c deleted file mode 100644 index 3a844b7740..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr1043nd.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * TP-LINK TL-WR1043ND board support - * - * Copyright (C) 2009 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ar9xxx-wmac.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" - -#define TL_WR1043ND_GPIO_LED_USB 1 -#define TL_WR1043ND_GPIO_LED_SYSTEM 2 -#define TL_WR1043ND_GPIO_LED_QSS 5 -#define TL_WR1043ND_GPIO_LED_WLAN 9 - -#define TL_WR1043ND_GPIO_BTN_RESET 3 -#define TL_WR1043ND_GPIO_BTN_QSS 7 - -#define TL_WR1043ND_GPIO_RTL8366_SDA 18 -#define TL_WR1043ND_GPIO_RTL8366_SCK 19 - -#define TL_WR1043ND_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043ND_KEYS_POLL_INTERVAL) - -static const char *tl_wr1043nd_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr1043nd_flash_data = { - .part_probes = tl_wr1043nd_part_probes, -}; - -static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = { - { - .name = "tp-link:green:usb", - .gpio = TL_WR1043ND_GPIO_LED_USB, - .active_low = 1, - }, { - .name = "tp-link:green:system", - .gpio = TL_WR1043ND_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WR1043ND_GPIO_LED_QSS, - .active_low = 0, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WR1043ND_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_wr1043nd_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR1043ND_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR1043ND_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static struct rtl8366_platform_data tl_wr1043nd_rtl8366rb_data = { - .gpio_sda = TL_WR1043ND_GPIO_RTL8366_SDA, - .gpio_sck = TL_WR1043ND_GPIO_RTL8366_SCK, -}; - -static struct platform_device tl_wr1043nd_rtl8366rb_device = { - .name = RTL8366RB_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &tl_wr1043nd_rtl8366rb_data, - } -}; - -static void __init tl_wr1043nd_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - ar71xx_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev; - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.speed = SPEED_1000; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - ar71xx_eth0_pll_data.pll_1000 = 0x1a000000; - - ar71xx_add_device_eth(0); - - ar71xx_add_device_usb(); - - ar71xx_add_device_m25p80(&tl_wr1043nd_flash_data); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio), - tl_wr1043nd_leds_gpio); - - platform_device_register(&tl_wr1043nd_rtl8366rb_device); - - ar71xx_register_gpio_keys_polled(-1, TL_WR1043ND_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr1043nd_gpio_keys), - tl_wr1043nd_gpio_keys); - - ar9xxx_add_device_wmac(eeprom, mac); -} - -MIPS_MACHINE(AR71XX_MACH_TL_WR1043ND, "TL-WR1043ND", "TP-LINK TL-WR1043ND", - tl_wr1043nd_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr2543n.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr2543n.c deleted file mode 100644 index c547b73921..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr2543n.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * TP-LINK TL-WR2543ND board support - * - * Copyright (C) 2011 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-ap91-pci.h" -#include "dev-m25p80.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" - -#define TL_WR2543N_GPIO_LED_WPS 0 -#define TL_WR2543N_GPIO_LED_USB 8 - -#define TL_WR2543N_GPIO_BTN_RESET 11 -#define TL_WR2543N_GPIO_BTN_WPS 12 - -#define TL_WR2543N_GPIO_RTL8367_SDA 1 -#define TL_WR2543N_GPIO_RTL8367_SCK 6 - -#define TL_WR2543N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR2543N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR2543N_KEYS_POLL_INTERVAL) - -static const char *tl_wr2543n_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr2543n_flash_data = { - .part_probes = tl_wr2543n_part_probes, - .max_read_len = 64, -}; - -static struct gpio_led tl_wr2543n_leds_gpio[] __initdata = { - { - .name = "tp-link:green:usb", - .gpio = TL_WR2543N_GPIO_LED_USB, - .active_low = 1, - }, { - .name = "tp-link:green:wps", - .gpio = TL_WR2543N_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_wr2543n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR2543N_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR2543N_GPIO_BTN_WPS, - } -}; - -static struct rtl8367_extif_config tl_wr2543n_rtl8367_extif0_cfg = { - .mode = RTL8367_EXTIF_MODE_RGMII, - .txdelay = 1, - .rxdelay = 0, - .ability = { - .force_mode = 1, - .txpause = 1, - .rxpause = 1, - .link = 1, - .duplex = 1, - .speed = RTL8367_PORT_SPEED_1000, - }, -}; - -static struct rtl8367_platform_data tl_wr2543n_rtl8367_data = { - .gpio_sda = TL_WR2543N_GPIO_RTL8367_SDA, - .gpio_sck = TL_WR2543N_GPIO_RTL8367_SCK, - .extif0_cfg = &tl_wr2543n_rtl8367_extif0_cfg, -}; - -static struct platform_device tl_wr2543n_rtl8367_device = { - .name = RTL8367_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &tl_wr2543n_rtl8367_data, - } -}; - -static void __init tl_wr2543n_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ar71xx_add_device_m25p80(&tl_wr2543n_flash_data); - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr2543n_leds_gpio), - tl_wr2543n_leds_gpio); - ar71xx_register_gpio_keys_polled(-1, TL_WR2543N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr2543n_gpio_keys), - tl_wr2543n_gpio_keys); - ar71xx_add_device_usb(); - ap91_pci_init(eeprom, mac); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, -1); - ar71xx_eth0_data.mii_bus_dev = &tl_wr2543n_rtl8367_device.dev; - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.speed = SPEED_1000; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - ar71xx_eth0_pll_data.pll_1000 = 0x1a000000; - - ar71xx_add_device_eth(0); - - platform_device_register(&tl_wr2543n_rtl8367_device); -} - -MIPS_MACHINE(AR71XX_MACH_TL_WR2543N, "TL-WR2543N", "TP-LINK TL-WR2543N/ND", - tl_wr2543n_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr703n.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr703n.c deleted file mode 100644 index e9c2f25fe3..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr703n.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * TP-LINK TL-WR703N board support - * - * Copyright (C) 2011 dongyuqi <729650915@qq.com> - * Copyright (C) 2011 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-ar9xxx-wmac.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" - -#define TL_WR703N_GPIO_LED_SYSTEM 27 -#define TL_WR703N_GPIO_BTN_RESET 11 - -#define TL_WR703N_GPIO_USB_POWER 8 - -#define TL_WR703N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR703N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR703N_KEYS_POLL_INTERVAL) - -static const char *tl_wr703n_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr703n_flash_data = { - .part_probes = tl_wr703n_part_probes, -}; - -static struct gpio_led tl_wr703n_leds_gpio[] __initdata = { - { - .name = "tp-link:blue:system", - .gpio = TL_WR703N_GPIO_LED_SYSTEM, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wr703n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR703N_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR703N_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init tl_wr703n_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ar71xx_add_device_m25p80(&tl_wr703n_flash_data); - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr703n_leds_gpio), - tl_wr703n_leds_gpio); - ar71xx_register_gpio_keys_polled(-1, TL_WR703N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr703n_gpio_keys), - tl_wr703n_gpio_keys); - - gpio_request(TL_WR703N_GPIO_USB_POWER, "USB power"); - gpio_direction_output(TL_WR703N_GPIO_USB_POWER, 1); - ar71xx_add_device_usb(); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - - ar71xx_add_device_mdio(0, 0x0); - ar71xx_add_device_eth(0); - - ar9xxx_add_device_wmac(ee, mac); -} - -MIPS_MACHINE(AR71XX_MACH_TL_WR703N, "TL-WR703N", "TP-LINK TL-WR703N v1", - tl_wr703n_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr741nd-v4.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr741nd-v4.c deleted file mode 100644 index 8af72320cb..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr741nd-v4.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * TP-LINK TL-WR741ND v4 board support - * - * Copyright (C) 2011 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-ar9xxx-wmac.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" - -#define TL_WR741NDV4_GPIO_BTN_RESET 11 -#define TL_WR741NDV4_GPIO_BTN_WPS 26 - -#define TL_WR741NDV4_GPIO_LED_WLAN 0 -#define TL_WR741NDV4_GPIO_LED_QSS 1 -#define TL_WR741NDV4_GPIO_LED_WAN 13 -#define TL_WR741NDV4_GPIO_LED_LAN1 14 -#define TL_WR741NDV4_GPIO_LED_LAN2 15 -#define TL_WR741NDV4_GPIO_LED_LAN3 16 -#define TL_WR741NDV4_GPIO_LED_LAN4 17 - -#define TL_WR741NDV4_GPIO_LED_SYSTEM 27 - -#define TL_WR741NDV4_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741NDV4_KEYS_POLL_INTERVAL) - -static const char *tl_wr741ndv4_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr741ndv4_flash_data = { - .part_probes = tl_wr741ndv4_part_probes, -}; - -static struct gpio_led tl_wr741ndv4_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan1", - .gpio = TL_WR741NDV4_GPIO_LED_LAN1, - .active_low = 0, - }, { - .name = "tp-link:green:lan2", - .gpio = TL_WR741NDV4_GPIO_LED_LAN2, - .active_low = 0, - }, { - .name = "tp-link:green:lan3", - .gpio = TL_WR741NDV4_GPIO_LED_LAN3, - .active_low = 0, - }, { - .name = "tp-link:green:lan4", - .gpio = TL_WR741NDV4_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WR741NDV4_GPIO_LED_QSS, - .active_low = 0, - }, { - .name = "tp-link:green:system", - .gpio = TL_WR741NDV4_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:wan", - .gpio = TL_WR741NDV4_GPIO_LED_WAN, - .active_low = 0, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WR741NDV4_GPIO_LED_WLAN, - .active_low = 0, - }, -}; - -static struct gpio_keys_button tl_wr741ndv4_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR741NDV4_GPIO_BTN_RESET, - .active_low = 1, - } , { - .desc = "WPS", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR741NDV4_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static void __init tl_wr741ndv4_gmac_setup(void) -{ - void __iomem *base; - u32 t; - - base = ioremap(AR933X_GMAC_BASE, AR933X_GMAC_SIZE); - - t = __raw_readl(base + AR933X_GMAC_REG_ETH_CFG); - t |= (AR933X_ETH_CFG_SW_PHY_SWAP | AR933X_ETH_CFG_SW_PHY_ADDR_SWAP); - __raw_writel(t, base + AR933X_GMAC_REG_ETH_CFG); - - iounmap(base); -} - -static void __init tl_wr741ndv4_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - tl_wr741ndv4_gmac_setup(); - - ar71xx_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr741ndv4_leds_gpio), - tl_wr741ndv4_leds_gpio); - - ar71xx_register_gpio_keys_polled(1, TL_WR741NDV4_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr741ndv4_gpio_keys), - tl_wr741ndv4_gpio_keys); - - ar71xx_add_device_m25p80(&tl_wr741ndv4_flash_data); - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 1); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, -1); - - ar71xx_add_device_mdio(0, 0x0); - ar71xx_add_device_eth(1); - ar71xx_add_device_eth(0); - - ar9xxx_add_device_wmac(ee, mac); -} - -MIPS_MACHINE(AR71XX_MACH_TL_WR741ND_V4, "TL-WR741ND-v4", - "TP-LINK TL-WR741ND v4", tl_wr741ndv4_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr741nd.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr741nd.c deleted file mode 100644 index f877e98822..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr741nd.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * TP-LINK TL-WR741ND board support - * - * Copyright (C) 2009-2010 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ap91-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" - -#define TL_WR741ND_GPIO_LED_QSS 0 -#define TL_WR741ND_GPIO_LED_SYSTEM 1 -#define TL_WR741ND_GPIO_LED_LAN1 13 -#define TL_WR741ND_GPIO_LED_LAN2 14 -#define TL_WR741ND_GPIO_LED_LAN3 15 -#define TL_WR741ND_GPIO_LED_LAN4 16 -#define TL_WR741ND_GPIO_LED_WAN 17 - -#define TL_WR741ND_GPIO_BTN_RESET 11 -#define TL_WR741ND_GPIO_BTN_QSS 12 - -#define TL_WR741ND_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR741ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741ND_KEYS_POLL_INTERVAL) - -static const char *tl_wr741nd_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr741nd_flash_data = { - .part_probes = tl_wr741nd_part_probes, -}; - -static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan1", - .gpio = TL_WR741ND_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "tp-link:green:lan2", - .gpio = TL_WR741ND_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "tp-link:green:lan3", - .gpio = TL_WR741ND_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "tp-link:green:lan4", - .gpio = TL_WR741ND_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WR741ND_GPIO_LED_QSS, - .active_low = 1, - }, { - .name = "tp-link:green:system", - .gpio = TL_WR741ND_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:wan", - .gpio = TL_WR741ND_GPIO_LED_WAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wr741nd_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR741ND_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR741ND_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static void __init tl_wr741nd_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ar71xx_add_device_m25p80(&tl_wr741nd_flash_data); - - ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio), - tl_wr741nd_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, TL_WR741ND_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr741nd_gpio_keys), - tl_wr741nd_gpio_keys); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 1); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, -1); - - ar71xx_add_device_mdio(0, 0x0); - - /* LAN ports */ - ar71xx_add_device_eth(1); - - /* WAN port */ - ar71xx_add_device_eth(0); - - ap91_pci_setup_wmac_led_pin(1); - - ap91_pci_init(ee, mac); -} -MIPS_MACHINE(AR71XX_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND", - tl_wr741nd_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr841n.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr841n.c deleted file mode 100644 index 3871b7e077..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr841n.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * TP-LINK TL-WR841N board support - * - * Copyright (C) 2009 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-dsa.h" -#include "dev-m25p80.h" -#include "dev-gpio-buttons.h" -#include "dev-pb42-pci.h" -#include "dev-leds-gpio.h" - -#define TL_WR841ND_V1_GPIO_LED_SYSTEM 2 -#define TL_WR841ND_V1_GPIO_LED_QSS_GREEN 4 -#define TL_WR841ND_V1_GPIO_LED_QSS_RED 5 - -#define TL_WR841ND_V1_GPIO_BTN_RESET 3 -#define TL_WR841ND_V1_GPIO_BTN_QSS 7 - -#define TL_WR841ND_V1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL \ - (3 * TL_WR841ND_V1_KEYS_POLL_INTERVAL) - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition tl_wr841n_v1_partitions[] = { - { - .name = "redboot", - .offset = 0, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "kernel", - .offset = 0x020000, - .size = 0x140000, - }, { - .name = "rootfs", - .offset = 0x160000, - .size = 0x280000, - }, { - .name = "config", - .offset = 0x3e0000, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x020000, - .size = 0x3c0000, - } -}; -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data tl_wr841n_v1_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = tl_wr841n_v1_partitions, - .nr_parts = ARRAY_SIZE(tl_wr841n_v1_partitions), -#endif -}; - -static struct gpio_led tl_wr841n_v1_leds_gpio[] __initdata = { - { - .name = "tp-link:green:system", - .gpio = TL_WR841ND_V1_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:red:qss", - .gpio = TL_WR841ND_V1_GPIO_LED_QSS_RED, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WR841ND_V1_GPIO_LED_QSS_GREEN, - } -}; - -static struct gpio_keys_button tl_wr841n_v1_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR841ND_V1_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR841ND_V1_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static struct dsa_chip_data tl_wr841n_v1_dsa_chip = { - .port_names[0] = "wan", - .port_names[1] = "lan1", - .port_names[2] = "lan2", - .port_names[3] = "lan3", - .port_names[4] = "lan4", - .port_names[5] = "cpu", -}; - -static struct dsa_platform_data tl_wr841n_v1_dsa_data = { - .nr_chips = 1, - .chip = &tl_wr841n_v1_dsa_chip, -}; - -static void __init tl_wr841n_v1_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - - ar71xx_add_device_mdio(0, 0x0); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth0_data.speed = SPEED_100; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - - ar71xx_add_device_eth(0); - ar71xx_add_device_dsa(&ar71xx_eth0_device.dev, &ar71xx_mdio0_device.dev, - &tl_wr841n_v1_dsa_data); - - ar71xx_add_device_m25p80(&tl_wr841n_v1_flash_data); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v1_leds_gpio), - tl_wr841n_v1_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, TL_WR841ND_V1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr841n_v1_gpio_keys), - tl_wr841n_v1_gpio_keys); - - pb42_pci_init(); -} - -MIPS_MACHINE(AR71XX_MACH_TL_WR841N_V1, "TL-WR841N-v1.5", "TP-LINK TL-WR841N v1", - tl_wr841n_v1_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr941nd.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr941nd.c deleted file mode 100644 index 14176b87a7..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr941nd.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * TP-LINK TL-WR941ND board support - * - * Copyright (C) 2009-2010 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-dsa.h" -#include "dev-m25p80.h" -#include "dev-ar9xxx-wmac.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" - -#define TL_WR941ND_GPIO_LED_SYSTEM 2 -#define TL_WR941ND_GPIO_LED_QSS_RED 4 -#define TL_WR941ND_GPIO_LED_QSS_GREEN 5 -#define TL_WR941ND_GPIO_LED_WLAN 9 - -#define TL_WR941ND_GPIO_BTN_RESET 3 -#define TL_WR941ND_GPIO_BTN_QSS 7 - -#define TL_WR941ND_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR941ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR941ND_KEYS_POLL_INTERVAL) - -static const char *tl_wr941nd_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr941nd_flash_data = { - .part_probes = tl_wr941nd_part_probes, -}; - -static struct gpio_led tl_wr941nd_leds_gpio[] __initdata = { - { - .name = "tp-link:green:system", - .gpio = TL_WR941ND_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:red:qss", - .gpio = TL_WR941ND_GPIO_LED_QSS_RED, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WR941ND_GPIO_LED_QSS_GREEN, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WR941ND_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_wr941nd_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR941ND_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR941ND_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static struct dsa_chip_data tl_wr941nd_dsa_chip = { - .port_names[0] = "wan", - .port_names[1] = "lan1", - .port_names[2] = "lan2", - .port_names[3] = "lan3", - .port_names[4] = "lan4", - .port_names[5] = "cpu", -}; - -static struct dsa_platform_data tl_wr941nd_dsa_data = { - .nr_chips = 1, - .chip = &tl_wr941nd_dsa_chip, -}; - -static void __init tl_wr941nd_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ar71xx_add_device_mdio(0, 0x0); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth0_data.speed = SPEED_100; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - - ar71xx_add_device_eth(0); - ar71xx_add_device_dsa(&ar71xx_eth0_device.dev, &ar71xx_mdio0_device.dev, - &tl_wr941nd_dsa_data); - - ar71xx_add_device_m25p80(&tl_wr941nd_flash_data); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio), - tl_wr941nd_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, TL_WR941ND_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr941nd_gpio_keys), - tl_wr941nd_gpio_keys); - ar9xxx_add_device_wmac(eeprom, mac); -} - -MIPS_MACHINE(AR71XX_MACH_TL_WR941ND, "TL-WR941ND", "TP-LINK TL-WR941ND", - tl_wr941nd_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ubnt.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ubnt.c deleted file mode 100644 index 8f1a1355d4..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ubnt.c +++ /dev/null @@ -1,357 +0,0 @@ -/* - * Ubiquiti RouterStation support - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * Copyright (C) 2008 Ubiquiti - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ap91-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-pb42-pci.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" - -#define UBNT_RS_GPIO_LED_RF 2 -#define UBNT_RS_GPIO_SW4 8 - -#define UBNT_LS_SR71_GPIO_LED_D25 0 -#define UBNT_LS_SR71_GPIO_LED_D26 1 -#define UBNT_LS_SR71_GPIO_LED_D24 2 -#define UBNT_LS_SR71_GPIO_LED_D23 4 -#define UBNT_LS_SR71_GPIO_LED_D22 5 -#define UBNT_LS_SR71_GPIO_LED_D27 6 -#define UBNT_LS_SR71_GPIO_LED_D28 7 - -#define UBNT_M_GPIO_LED_L1 0 -#define UBNT_M_GPIO_LED_L2 1 -#define UBNT_M_GPIO_LED_L3 11 -#define UBNT_M_GPIO_LED_L4 7 -#define UBNT_M_GPIO_BTN_RESET 12 - -#define UBNT_KEYS_POLL_INTERVAL 20 /* msecs */ -#define UBNT_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_KEYS_POLL_INTERVAL) - -static struct gpio_led ubnt_rs_leds_gpio[] __initdata = { - { - .name = "ubnt:green:rf", - .gpio = UBNT_RS_GPIO_LED_RF, - .active_low = 0, - } -}; - -static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = { - { - .name = "ubnt:green:d22", - .gpio = UBNT_LS_SR71_GPIO_LED_D22, - .active_low = 0, - }, { - .name = "ubnt:green:d23", - .gpio = UBNT_LS_SR71_GPIO_LED_D23, - .active_low = 0, - }, { - .name = "ubnt:green:d24", - .gpio = UBNT_LS_SR71_GPIO_LED_D24, - .active_low = 0, - }, { - .name = "ubnt:red:d25", - .gpio = UBNT_LS_SR71_GPIO_LED_D25, - .active_low = 0, - }, { - .name = "ubnt:red:d26", - .gpio = UBNT_LS_SR71_GPIO_LED_D26, - .active_low = 0, - }, { - .name = "ubnt:green:d27", - .gpio = UBNT_LS_SR71_GPIO_LED_D27, - .active_low = 0, - }, { - .name = "ubnt:green:d28", - .gpio = UBNT_LS_SR71_GPIO_LED_D28, - .active_low = 0, - } -}; - -static struct gpio_led ubnt_m_leds_gpio[] __initdata = { - { - .name = "ubnt:red:link1", - .gpio = UBNT_M_GPIO_LED_L1, - .active_low = 0, - }, { - .name = "ubnt:orange:link2", - .gpio = UBNT_M_GPIO_LED_L2, - .active_low = 0, - }, { - .name = "ubnt:green:link3", - .gpio = UBNT_M_GPIO_LED_L3, - .active_low = 0, - }, { - .name = "ubnt:green:link4", - .gpio = UBNT_M_GPIO_LED_L4, - .active_low = 0, - } -}; - -static struct gpio_keys_button ubnt_gpio_keys[] __initdata = { - { - .desc = "sw4", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = UBNT_KEYS_DEBOUNCE_INTERVAL, - .gpio = UBNT_RS_GPIO_SW4, - .active_low = 1, - } -}; - -static struct gpio_keys_button ubnt_m_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = UBNT_KEYS_DEBOUNCE_INTERVAL, - .gpio = UBNT_M_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static const char *ubnt_part_probes[] = { - "RedBoot", - NULL, -}; - -static struct flash_platform_data ubnt_flash_data = { - .part_probes = ubnt_part_probes, -}; - -static void __init ubnt_generic_setup(void) -{ - ar71xx_add_device_m25p80(&ubnt_flash_data); - - ar71xx_register_gpio_keys_polled(-1, UBNT_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ubnt_gpio_keys), - ubnt_gpio_keys); - - pb42_pci_init(); -} - -/* - * There is Secondary MAC address duplicate problem with some UBNT HW batches. - * Do not increase Secondary MAC address by 1 but do workaround - * with 'Locally Administrated' bit. - */ -static void __init ubnt_init_secondary_mac(unsigned char *mac_base) -{ - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac_base, 0); - ar71xx_eth1_data.mac_addr[0] |= 0x02; -} - -#define UBNT_RS_WAN_PHYMASK BIT(20) -#define UBNT_RS_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19)) - -static void __init ubnt_rs_setup(void) -{ - ubnt_generic_setup(); - - ar71xx_add_device_mdio(0, ~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK)); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ar71xx_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK; - - ubnt_init_secondary_mac(ar71xx_mac_base); - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth1_data.speed = SPEED_100; - ar71xx_eth1_data.duplex = DUPLEX_FULL; - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ar71xx_add_device_usb(); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio), - ubnt_rs_leds_gpio); -} - -MIPS_MACHINE(AR71XX_MACH_UBNT_RS, "UBNT-RS", "Ubiquiti RouterStation", - ubnt_rs_setup); - -#define UBNT_RSPRO_WAN_PHYMASK BIT(4) -#define UBNT_RSPRO_LAN_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3)) - -static void __init ubnt_rspro_setup(void) -{ - ubnt_generic_setup(); - - ar71xx_add_device_mdio(0, ~(UBNT_RSPRO_WAN_PHYMASK | - UBNT_RSPRO_LAN_PHYMASK)); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK; - - ubnt_init_secondary_mac(ar71xx_mac_base); - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK; - ar71xx_eth1_data.speed = SPEED_1000; - ar71xx_eth1_data.duplex = DUPLEX_FULL; - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ar71xx_add_device_usb(); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio), - ubnt_rs_leds_gpio); -} - -MIPS_MACHINE(AR71XX_MACH_UBNT_RSPRO, "UBNT-RSPRO", "Ubiquiti RouterStation Pro", - ubnt_rspro_setup); - -static void __init ubnt_lsx_setup(void) -{ - ubnt_generic_setup(); -} - -MIPS_MACHINE(AR71XX_MACH_UBNT_LSX, "UBNT-LSX", "Ubiquiti LSX", ubnt_lsx_setup); - -#define UBNT_LSSR71_PHY_MASK BIT(1) - -static void __init ubnt_lssr71_setup(void) -{ - ubnt_generic_setup(); - - ar71xx_add_device_mdio(0, ~UBNT_LSSR71_PHY_MASK); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ar71xx_eth0_data.phy_mask = UBNT_LSSR71_PHY_MASK; - - ar71xx_add_device_eth(0); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio), - ubnt_ls_sr71_leds_gpio); -} - -MIPS_MACHINE(AR71XX_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71", - ubnt_lssr71_setup); - -#define UBNT_M_WAN_PHYMASK BIT(4) - -static void __init ubnt_m_setup(void) -{ - u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ar71xx_add_device_m25p80(NULL); - - ar71xx_add_device_mdio(0, ~UBNT_M_WAN_PHYMASK); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac2, 0); - ar71xx_add_device_eth(0); - - ap91_pci_init(ee, NULL); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_m_leds_gpio), - ubnt_m_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, UBNT_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ubnt_m_gpio_keys), - ubnt_m_gpio_keys); -} - -static void __init ubnt_rocket_m_setup(void) -{ - ubnt_m_setup(); - ar71xx_add_device_usb(); -} - -MIPS_MACHINE(AR71XX_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M", - ubnt_m_setup); -MIPS_MACHINE(AR71XX_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M", - ubnt_rocket_m_setup); - -/* TODO detect the second ethernet port and use one - init function for all Ubiquiti MIMO series products */ -static void __init ubnt_nano_m_setup(void) -{ - ubnt_m_setup(); - ar71xx_add_device_eth(1); -} - -MIPS_MACHINE(AR71XX_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M", - ubnt_nano_m_setup); - -static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = { - { - .name = "ubnt:green:globe", - .gpio = 0, - .active_low = 1, - } -}; - -static void __init ubnt_airrouter_setup(void) -{ - u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ar71xx_add_device_m25p80(NULL); - ar71xx_add_device_mdio(0, ~UBNT_M_WAN_PHYMASK); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0); - ubnt_init_secondary_mac(mac1); - - ar71xx_add_device_eth(1); - ar71xx_add_device_eth(0); - ar71xx_add_device_usb(); - - ap91_pci_init(ee, NULL); - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio), - ubnt_airrouter_leds_gpio); -} - -MIPS_MACHINE(AR71XX_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter", - ubnt_airrouter_setup); - -static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = { - { - .name = "ubnt:orange:dome", - .gpio = 1, - .active_low = 0, - }, { - .name = "ubnt:green:dome", - .gpio = 0, - .active_low = 0, - } -}; - -static void __init ubnt_unifi_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ar71xx_add_device_m25p80(NULL); - - ar71xx_add_device_mdio(0, ~UBNT_M_WAN_PHYMASK); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - ar71xx_add_device_eth(0); - - ap91_pci_init(ee, NULL); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio), - ubnt_unifi_leds_gpio); -} - -MIPS_MACHINE(AR71XX_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi", - ubnt_unifi_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-whr-hp-g300n.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-whr-hp-g300n.c deleted file mode 100644 index aaa8c1052b..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-whr-hp-g300n.c +++ /dev/null @@ -1,200 +0,0 @@ -/* - * Buffalo WHR-HP-G300N board support - * - * based on ... - * - * TP-LINK TL-WR741ND board support - * - * Copyright (C) 2009-2010 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ap91-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" - -#define WHRHPG300N_GPIO_LED_SECURITY 0 -#define WHRHPG300N_GPIO_LED_DIAG 1 -#define WHRHPG300N_GPIO_LED_ROUTER 6 - -#define WHRHPG300N_GPIO_BTN_ROUTER_ON 7 -#define WHRHPG300N_GPIO_BTN_ROUTER_AUTO 8 -#define WHRHPG300N_GPIO_BTN_RESET 11 -#define WHRHPG300N_GPIO_BTN_AOSS 12 -#define WHRHPG300N_GPIO_LED_LAN1 13 -#define WHRHPG300N_GPIO_LED_LAN2 14 -#define WHRHPG300N_GPIO_LED_LAN3 15 -#define WHRHPG300N_GPIO_LED_LAN4 16 -#define WHRHPG300N_GPIO_LED_WAN 17 - -#define WHRHPG300N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WHRHPG300N_KEYS_DEBOUNCE_INTERVAL (3 * WHRHPG300N_KEYS_POLL_INTERVAL) - -#define WHRHPG300N_MAC_OFFSET 0x20c - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition whrhpg300n_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x03e000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x03e000, - .size = 0x002000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "kernel", - .offset = 0x040000, - .size = 0x0e0000, - }, { - .name = "rootfs", - .offset = 0x120000, - .size = 0x2c0000, - }, { - .name = "user_property", - .offset = 0x3e0000, - .size = 0x010000, - }, { - .name = "ART", - .offset = 0x3f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x040000, - .size = 0x3a0000, - } -}; -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data whrhpg300n_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = whrhpg300n_partitions, - .nr_parts = ARRAY_SIZE(whrhpg300n_partitions), -#endif -}; - -static struct gpio_led whrhpg300n_leds_gpio[] __initdata = { - { - .name = "buffalo:orange:security", - .gpio = WHRHPG300N_GPIO_LED_SECURITY, - .active_low = 1, - }, { - .name = "buffalo:red:diag", - .gpio = WHRHPG300N_GPIO_LED_DIAG, - .active_low = 1, - }, { - .name = "buffalo:green:router", - .gpio = WHRHPG300N_GPIO_LED_ROUTER, - .active_low = 1, - }, { - .name = "buffalo:green:wan", - .gpio = WHRHPG300N_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "buffalo:green:lan1", - .gpio = WHRHPG300N_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "buffalo:green:lan2", - .gpio = WHRHPG300N_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "buffalo:green:lan3", - .gpio = WHRHPG300N_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "buffalo:green:lan4", - .gpio = WHRHPG300N_GPIO_LED_LAN4, - .active_low = 1, - } -}; - -static struct gpio_keys_button whrhpg300n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, - .gpio = WHRHPG300N_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "aoss/wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .gpio = WHRHPG300N_GPIO_BTN_AOSS, - .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, - .active_low = 1, - }, { - .desc = "router_on", - .type = EV_KEY, - .code = BTN_2, - .gpio = WHRHPG300N_GPIO_BTN_ROUTER_ON, - .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, - .active_low = 1, - }, { - .desc = "router_auto", - .type = EV_KEY, - .code = BTN_3, - .gpio = WHRHPG300N_GPIO_BTN_ROUTER_AUTO, - .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, - .active_low = 1, - } -}; - -static void __init whrhpg300n_setup(void) -{ - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - u8 *mac = (u8 *) KSEG1ADDR(ee + WHRHPG300N_MAC_OFFSET); - - ar71xx_add_device_m25p80(&whrhpg300n_flash_data); - - ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(whrhpg300n_leds_gpio), - whrhpg300n_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, WHRHPG300N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(whrhpg300n_gpio_keys), - whrhpg300n_gpio_keys); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); - - ar71xx_add_device_mdio(0, 0x0); - - /* LAN ports */ - ar71xx_add_device_eth(1); - /* WAN port */ - ar71xx_add_device_eth(0); - - ap91_pci_setup_wmac_led_pin(1); - - ap91_pci_init(ee, mac); -} - -MIPS_MACHINE(AR71XX_MACH_WHR_HP_G300N, "WHR-HP-G300N", "Buffalo WHR-HP-G300N", - whrhpg300n_setup); - -MIPS_MACHINE(AR71XX_MACH_WHR_G301N, "WHR-G301N", "Buffalo WHR-G301N", - whrhpg300n_setup); - -MIPS_MACHINE(AR71XX_MACH_WHR_HP_GN, "WHR-HP-GN", "Buffalo WHR-HP-GN", - whrhpg300n_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wndr3700.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wndr3700.c deleted file mode 100644 index c708b97d93..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wndr3700.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * Netgear WNDR3700 board support - * - * Copyright (C) 2009 Marco Porsch - * Copyright (C) 2009-2010 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ap94-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" - -#define WNDR3700_GPIO_LED_WPS_ORANGE 0 -#define WNDR3700_GPIO_LED_POWER_ORANGE 1 -#define WNDR3700_GPIO_LED_POWER_GREEN 2 -#define WNDR3700_GPIO_LED_WPS_GREEN 4 -#define WNDR3700_GPIO_LED_WAN_GREEN 6 - -#define WNDR3700_GPIO_BTN_WPS 3 -#define WNDR3700_GPIO_BTN_RESET 8 -#define WNDR3700_GPIO_BTN_WIFI 11 - -#define WNDR3700_GPIO_RTL8366_SDA 5 -#define WNDR3700_GPIO_RTL8366_SCK 7 - -#define WNDR3700_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WNDR3700_KEYS_DEBOUNCE_INTERVAL (3 * WNDR3700_KEYS_POLL_INTERVAL) - -#define WNDR3700_ETH0_MAC_OFFSET 0 -#define WNDR3700_ETH1_MAC_OFFSET 0x6 - -#define WNDR3700_WMAC0_MAC_OFFSET 0 -#define WNDR3700_WMAC1_MAC_OFFSET 0xc -#define WNDR3700_CALDATA0_OFFSET 0x1000 -#define WNDR3700_CALDATA1_OFFSET 0x5000 - -static struct gpio_led wndr3700_leds_gpio[] __initdata = { - { - .name = "wndr3700:green:power", - .gpio = WNDR3700_GPIO_LED_POWER_GREEN, - .active_low = 1, - }, { - .name = "wndr3700:orange:power", - .gpio = WNDR3700_GPIO_LED_POWER_ORANGE, - .active_low = 1, - }, { - .name = "wndr3700:green:wps", - .gpio = WNDR3700_GPIO_LED_WPS_GREEN, - .active_low = 1, - }, { - .name = "wndr3700:orange:wps", - .gpio = WNDR3700_GPIO_LED_WPS_ORANGE, - .active_low = 1, - }, { - .name = "wndr3700:green:wan", - .gpio = WNDR3700_GPIO_LED_WAN_GREEN, - .active_low = 1, - } -}; - -static struct gpio_keys_button wndr3700_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNDR3700_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNDR3700_GPIO_BTN_WPS, - .active_low = 1, - }, { - .desc = "wifi", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNDR3700_GPIO_BTN_WIFI, - .active_low = 1, - } -}; - -static struct rtl8366_platform_data wndr3700_rtl8366s_data = { - .gpio_sda = WNDR3700_GPIO_RTL8366_SDA, - .gpio_sck = WNDR3700_GPIO_RTL8366_SCK, -}; - -static struct platform_device wndr3700_rtl8366s_device = { - .name = RTL8366S_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &wndr3700_rtl8366s_data, - } -}; - -/* - * The eth0 and wmac0 interfaces share the same MAC address which - * can lead to problems if operated unbridged. Set the locally - * administered bit on the eth0 MAC to make it unique. - */ - -static void __init wndr3700_init_local_mac(unsigned char *mac_base) -{ - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac_base, 0); - ar71xx_eth0_data.mac_addr[0] |= 0x02; -} - -static void __init wndr3700_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - wndr3700_init_local_mac(art + WNDR3700_ETH0_MAC_OFFSET); - ar71xx_eth0_pll_data.pll_1000 = 0x11110000; - ar71xx_eth0_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev; - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.speed = SPEED_1000; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, - art + WNDR3700_ETH1_MAC_OFFSET, 0); - ar71xx_eth1_pll_data.pll_1000 = 0x11110000; - ar71xx_eth1_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev; - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth1_data.phy_mask = 0x10; - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ar71xx_add_device_usb(); - - ar71xx_add_device_m25p80(NULL); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio), - wndr3700_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, WNDR3700_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wndr3700_gpio_keys), - wndr3700_gpio_keys); - - platform_device_register(&wndr3700_rtl8366s_device); - platform_device_register_simple("wndr3700-led-usb", -1, NULL, 0); - - ap94_pci_setup_wmac_led_pin(0, 5); - ap94_pci_setup_wmac_led_pin(1, 5); - - /* 2.4 GHz uses the first fixed antenna group (1, 0, 1, 0) */ - ap94_pci_setup_wmac_gpio(0, (0xf << 6), (0xa << 6)); - - /* 5 GHz uses the second fixed antenna group (0, 1, 1, 0) */ - ap94_pci_setup_wmac_gpio(1, (0xf << 6), (0x6 << 6)); - - ap94_pci_init(art + WNDR3700_CALDATA0_OFFSET, - art + WNDR3700_WMAC0_MAC_OFFSET, - art + WNDR3700_CALDATA1_OFFSET, - art + WNDR3700_WMAC1_MAC_OFFSET); -} - -MIPS_MACHINE(AR71XX_MACH_WNDR3700, "WNDR3700", - "NETGEAR WNDR3700/WNDR3800/WNDRMAC", - wndr3700_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wnr2000.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wnr2000.c deleted file mode 100644 index 37477eb221..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wnr2000.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * NETGEAR WNR2000 board support - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * Copyright (C) 2008-2009 Andy Boyett - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ar9xxx-wmac.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" - -#define WNR2000_GPIO_LED_PWR_GREEN 14 -#define WNR2000_GPIO_LED_PWR_AMBER 7 -#define WNR2000_GPIO_LED_WPS 4 -#define WNR2000_GPIO_LED_WLAN 6 -#define WNR2000_GPIO_BTN_RESET 21 -#define WNR2000_GPIO_BTN_WPS 8 - -#define WNR2000_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WNR2000_KEYS_DEBOUNCE_INTERVAL (3 * WNR2000_KEYS_POLL_INTERVAL) - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition wnr2000_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x040000, - .size = 0x010000, - }, { - .name = "rootfs", - .offset = 0x050000, - .size = 0x240000, - }, { - .name = "user-config", - .offset = 0x290000, - .size = 0x010000, - }, { - .name = "uImage", - .offset = 0x2a0000, - .size = 0x120000, - }, { - .name = "language_table", - .offset = 0x3c0000, - .size = 0x020000, - }, { - .name = "rootfs_checksum", - .offset = 0x3e0000, - .size = 0x010000, - }, { - .name = "art", - .offset = 0x3f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - } -}; -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data wnr2000_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = wnr2000_partitions, - .nr_parts = ARRAY_SIZE(wnr2000_partitions), -#endif -}; - -static struct gpio_led wnr2000_leds_gpio[] __initdata = { - { - .name = "wnr2000:green:power", - .gpio = WNR2000_GPIO_LED_PWR_GREEN, - .active_low = 1, - }, { - .name = "wnr2000:amber:power", - .gpio = WNR2000_GPIO_LED_PWR_AMBER, - .active_low = 1, - }, { - .name = "wnr2000:green:wps", - .gpio = WNR2000_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "wnr2000:blue:wlan", - .gpio = WNR2000_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button wnr2000_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNR2000_GPIO_BTN_RESET, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNR2000_GPIO_BTN_WPS, - } -}; - -static void __init wnr2000_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ar71xx_add_device_mdio(0, 0x0); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth0_data.speed = SPEED_100; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - ar71xx_eth0_data.has_ar8216 = 1; - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, eeprom, 1); - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth1_data.phy_mask = 0x10; - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ar71xx_add_device_m25p80(&wnr2000_flash_data); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wnr2000_leds_gpio), - wnr2000_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, WNR2000_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wnr2000_gpio_keys), - wnr2000_gpio_keys); - - - ar9xxx_add_device_wmac(eeprom, NULL); -} - -MIPS_MACHINE(AR71XX_MACH_WNR2000, "WNR2000", "NETGEAR WNR2000", wnr2000_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wp543.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wp543.c deleted file mode 100644 index 3eb57119cb..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wp543.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * Compex WP543/WPJ543 board support - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-pb42-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" - -#define WP543_GPIO_SW6 2 -#define WP543_GPIO_LED_1 3 -#define WP543_GPIO_LED_2 4 -#define WP543_GPIO_LED_WLAN 5 -#define WP543_GPIO_LED_CONN 6 -#define WP543_GPIO_LED_DIAG 7 -#define WP543_GPIO_SW4 8 - -#define WP543_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WP543_KEYS_DEBOUNCE_INTERVAL (3 * WP543_KEYS_POLL_INTERVAL) - -static struct gpio_led wp543_leds_gpio[] __initdata = { - { - .name = "wp543:green:led1", - .gpio = WP543_GPIO_LED_1, - .active_low = 1, - }, { - .name = "wp543:green:led2", - .gpio = WP543_GPIO_LED_2, - .active_low = 1, - }, { - .name = "wp543:green:wlan", - .gpio = WP543_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "wp543:green:conn", - .gpio = WP543_GPIO_LED_CONN, - .active_low = 1, - }, { - .name = "wp543:green:diag", - .gpio = WP543_GPIO_LED_DIAG, - .active_low = 1, - } -}; - -static struct gpio_keys_button wp543_gpio_keys[] __initdata = { - { - .desc = "sw6", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL, - .gpio = WP543_GPIO_SW6, - }, { - .desc = "sw4", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL, - .gpio = WP543_GPIO_SW4, - } -}; - -static const char *wp543_part_probes[] = { - "MyLoader", - NULL, -}; - -static struct flash_platform_data wp543_flash_data = { - .part_probes = wp543_part_probes, -}; - -static void __init wp543_setup(void) -{ - ar71xx_add_device_m25p80(&wp543_flash_data); - - ar71xx_add_device_mdio(0, 0xfffffff0); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ar71xx_eth0_data.phy_mask = 0x0f; - ar71xx_eth0_data.reset_bit = RESET_MODULE_GE0_MAC | - RESET_MODULE_GE0_PHY; - ar71xx_add_device_eth(0); - - ar71xx_add_device_usb(); - - pb42_pci_init(); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio), - wp543_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, WP543_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wp543_gpio_keys), - wp543_gpio_keys); -} - -MIPS_MACHINE(AR71XX_MACH_WP543, "WP543", "Compex WP543", wp543_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wpe72.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wpe72.c deleted file mode 100644 index 7bdd3e4a06..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wpe72.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Compex WPE72 board support - * - * Copyright (C) 2012 Johnathan Boyce - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-pb42-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" - -#define WPE72_GPIO_RESET 12 -#define WPE72_GPIO_LED_DIAG 13 -#define WPE72_GPIO_LED_1 14 -#define WPE72_GPIO_LED_2 15 -#define WPE72_GPIO_LED_3 16 -#define WPE72_GPIO_LED_4 17 - -#define WPE72_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WPE72_KEYS_DEBOUNCE_INTERVAL (3 * WPE72_KEYS_POLL_INTERVAL) - -static struct gpio_led wpe72_leds_gpio[] __initdata = { - { - .name = "wpe72:green:led1", - .gpio = WPE72_GPIO_LED_1, - .active_low = 1, - }, { - .name = "wpe72:green:led2", - .gpio = WPE72_GPIO_LED_2, - .active_low = 1, - }, { - .name = "wpe72:green:led3", - .gpio = WPE72_GPIO_LED_3, - .active_low = 1, - }, { - .name = "wpe72:green:led4", - .gpio = WPE72_GPIO_LED_4, - .active_low = 1, - }, { - .name = "wpe72:green:diag", - .gpio = WPE72_GPIO_LED_DIAG, - .active_low = 1, - } -}; - -static struct gpio_keys_button wpe72_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WPE72_KEYS_DEBOUNCE_INTERVAL, - .gpio = WPE72_GPIO_RESET, - } -}; - -static const char *wpe72_part_probes[] = { - "MyLoader", - NULL, -}; - -static struct flash_platform_data wpe72_flash_data = { - .part_probes = wpe72_part_probes, -}; - -static void __init wpe72_setup(void) -{ - ar71xx_add_device_m25p80(&wpe72_flash_data); - ar71xx_add_device_mdio(0, 0x0); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ar71xx_add_device_usb(); - - pb42_pci_init(); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wpe72_leds_gpio), - wpe72_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, WPE72_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wpe72_gpio_keys), - wpe72_gpio_keys); -} - -MIPS_MACHINE(AR71XX_MACH_WPE72, "WPE72", "Compex WPE72", wpe72_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wrt160nl.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wrt160nl.c deleted file mode 100644 index 0cc560a40c..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wrt160nl.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * Linksys WRT160NL board support - * - * Copyright (C) 2009 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ar9xxx-wmac.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" -#include "nvram.h" - -#define WRT160NL_GPIO_LED_POWER 14 -#define WRT160NL_GPIO_LED_WPS_AMBER 9 -#define WRT160NL_GPIO_LED_WPS_BLUE 8 -#define WRT160NL_GPIO_LED_WLAN 6 - -#define WRT160NL_GPIO_BTN_WPS 7 -#define WRT160NL_GPIO_BTN_RESET 21 - -#define WRT160NL_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WRT160NL_KEYS_DEBOUNCE_INTERVAL (3 * WRT160NL_KEYS_POLL_INTERVAL) - -#define WRT160NL_NVRAM_ADDR 0x1f7e0000 -#define WRT160NL_NVRAM_SIZE 0x10000 - -static const char *wrt160nl_part_probes[] = { - "wrt160nl", - NULL, -}; - -static struct flash_platform_data wrt160nl_flash_data = { - .part_probes = wrt160nl_part_probes, -}; - -static struct gpio_led wrt160nl_leds_gpio[] __initdata = { - { - .name = "wrt160nl:blue:power", - .gpio = WRT160NL_GPIO_LED_POWER, - .active_low = 1, - .default_trigger = "default-on", - }, { - .name = "wrt160nl:amber:wps", - .gpio = WRT160NL_GPIO_LED_WPS_AMBER, - .active_low = 1, - }, { - .name = "wrt160nl:blue:wps", - .gpio = WRT160NL_GPIO_LED_WPS_BLUE, - .active_low = 1, - }, { - .name = "wrt160nl:blue:wlan", - .gpio = WRT160NL_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button wrt160nl_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL, - .gpio = WRT160NL_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL, - .gpio = WRT160NL_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static void __init wrt160nl_setup(void) -{ - const char *nvram = (char *) KSEG1ADDR(WRT160NL_NVRAM_ADDR); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - u8 mac[6]; - - if (nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE, - "lan_hwaddr=", mac) == 0) { - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); - } - - ar71xx_add_device_mdio(0, 0x0); - - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth0_data.phy_mask = 0x01; - - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth1_data.phy_mask = 0x10; - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ar71xx_add_device_m25p80(&wrt160nl_flash_data); - - ar71xx_add_device_usb(); - - if (nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE, - "wl0_hwaddr=", mac) == 0) - ar9xxx_add_device_wmac(eeprom, mac); - else - ar9xxx_add_device_wmac(eeprom, NULL); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wrt160nl_leds_gpio), - wrt160nl_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, WRT160NL_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wrt160nl_gpio_keys), - wrt160nl_gpio_keys); - -} - -MIPS_MACHINE(AR71XX_MACH_WRT160NL, "WRT160NL", "Linksys WRT160NL", - wrt160nl_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wrt400n.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wrt400n.c deleted file mode 100644 index 6d8d55fafa..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wrt400n.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * Linksys WRT400N board support - * - * Copyright (C) 2009-2010 Gabor Juhos - * Copyright (C) 2009 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-ap94-pci.h" -#include "dev-m25p80.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" - -#define WRT400N_GPIO_LED_POWER 1 -#define WRT400N_GPIO_LED_WPS_BLUE 4 -#define WRT400N_GPIO_LED_WPS_AMBER 5 -#define WRT400N_GPIO_LED_WLAN 6 - -#define WRT400N_GPIO_BTN_RESET 8 -#define WRT400N_GPIO_BTN_WLSEC 3 - -#define WRT400N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WRT400N_KEYS_DEBOUNE_INTERVAL (3 * WRT400N_KEYS_POLL_INTERVAL) - -#define WRT400N_MAC_ADDR_OFFSET 0x120c -#define WRT400N_CALDATA0_OFFSET 0x1000 -#define WRT400N_CALDATA1_OFFSET 0x5000 - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition wrt400n_partitions[] = { - { - .name = "uboot", - .offset = 0, - .size = 0x030000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "env", - .offset = 0x030000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "linux", - .offset = 0x040000, - .size = 0x140000, - }, { - .name = "rootfs", - .offset = 0x180000, - .size = 0x630000, - }, { - .name = "nvram", - .offset = 0x7b0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "factory", - .offset = 0x7c0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "language", - .offset = 0x7d0000, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "caldata", - .offset = 0x7f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x040000, - .size = 0x770000, - } -}; -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data wrt400n_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = wrt400n_partitions, - .nr_parts = ARRAY_SIZE(wrt400n_partitions), -#endif -}; - -static struct gpio_led wrt400n_leds_gpio[] __initdata = { - { - .name = "wrt400n:blue:wps", - .gpio = WRT400N_GPIO_LED_WPS_BLUE, - .active_low = 1, - }, { - .name = "wrt400n:amber:wps", - .gpio = WRT400N_GPIO_LED_WPS_AMBER, - .active_low = 1, - }, { - .name = "wrt400n:blue:wlan", - .gpio = WRT400N_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "wrt400n:blue:power", - .gpio = WRT400N_GPIO_LED_POWER, - .active_low = 0, - .default_trigger = "default-on", - } -}; - -static struct gpio_keys_button wrt400n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL, - .gpio = WRT400N_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wlsec", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL, - .gpio = WRT400N_GPIO_BTN_WLSEC, - .active_low = 1, - } -}; - -static void __init wrt400n_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *mac = art + WRT400N_MAC_ADDR_OFFSET; - - ar71xx_add_device_mdio(0, 0x0); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 1); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth0_data.speed = SPEED_100; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 2); - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth1_data.phy_mask = 0x10; - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ar71xx_add_device_m25p80(&wrt400n_flash_data); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wrt400n_leds_gpio), - wrt400n_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, WRT400N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wrt400n_gpio_keys), - wrt400n_gpio_keys); - - ap94_pci_init(art + WRT400N_CALDATA0_OFFSET, NULL, - art + WRT400N_CALDATA1_OFFSET, NULL); -} - -MIPS_MACHINE(AR71XX_MACH_WRT400N, "WRT400N", "Linksys WRT400N", wrt400n_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-ag300h.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-ag300h.c deleted file mode 100644 index d4ba62c84c..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-ag300h.c +++ /dev/null @@ -1,166 +0,0 @@ -/* - * Buffalo WZR-HP-AG300H board support - * - * Copyright (C) 2011 Felix Fietkau - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include - -#include -#include -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-ap94-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" - -#define WZRHPAG300H_MAC_OFFSET 0x20c -#define WZRHPAG300H_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPAG300H_KEYS_POLL_INTERVAL) - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition wzrhpag300h_flash_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x0040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x0040000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "art", - .offset = 0x0050000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "kernel", - .offset = 0x0060000, - .size = 0x0100000, - }, { - .name = "rootfs", - .offset = 0x0160000, - .size = 0x1e90000, - }, { - .name = "user_property", - .offset = 0x1ff0000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x0060000, - .size = 0x1f90000, - } -}; - -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data wzrhpag300h_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = wzrhpag300h_flash_partitions, - .nr_parts = ARRAY_SIZE(wzrhpag300h_flash_partitions), -#endif -}; - -static struct gpio_led wzrhpag300h_leds_gpio[] __initdata = { - { - .name = "buffalo:red:diag", - .gpio = 1, - .active_low = 1, - }, -}; - - -static struct gpio_keys_button wzrhpag300h_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 11, - .active_low = 1, - }, { - .desc = "usb", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 3, - .active_low = 1, - }, { - .desc = "aoss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 5, - .active_low = 1, - }, { - .desc = "router_auto", - .type = EV_KEY, - .code = BTN_6, - .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 6, - .active_low = 1, - }, { - .desc = "router_off", - .type = EV_KEY, - .code = BTN_5, - .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 7, - .active_low = 1, - } -}; - -static void __init wzrhpag300h_setup(void) -{ - u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1f051000); - u8 *eeprom2 = (u8 *) KSEG1ADDR(0x1f055000); - u8 *mac1 = eeprom1 + WZRHPAG300H_MAC_OFFSET; - u8 *mac2 = eeprom2 + WZRHPAG300H_MAC_OFFSET; - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac2, 1); - - ar71xx_add_device_mdio(0, ~(BIT(0) | BIT(4))); - - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.speed = SPEED_1000; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - ar71xx_eth0_data.phy_mask = BIT(0); - - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth1_data.phy_mask = BIT(4); - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ar71xx_add_device_usb(); - gpio_request(2, "usb"); - gpio_direction_output(2, 1); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpag300h_leds_gpio), - wzrhpag300h_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, WZRHPAG300H_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wzrhpag300h_gpio_keys), - wzrhpag300h_gpio_keys); - - ar71xx_add_device_m25p80_multi(&wzrhpag300h_flash_data); - - ap94_pci_init(eeprom1, mac1, eeprom2, mac2); -} - -MIPS_MACHINE(AR71XX_MACH_WZR_HP_AG300H, "WZR-HP-AG300H", - "Buffalo WZR-HP-AG300H", wzrhpag300h_setup); - diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh.c deleted file mode 100644 index 2eb742e4a9..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh.c +++ /dev/null @@ -1,292 +0,0 @@ -/* - * Buffalo WZR-HP-G300NH board support - * - * Copyright (C) 2010 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-ar9xxx-wmac.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" - -#define WZRHPG300NH_GPIO_LED_USB 0 -#define WZRHPG300NH_GPIO_LED_DIAG 1 -#define WZRHPG300NH_GPIO_LED_WIRELESS 6 -#define WZRHPG300NH_GPIO_LED_SECURITY 17 -#define WZRHPG300NH_GPIO_LED_ROUTER 18 - -#define WZRHPG300NH_GPIO_RTL8366_SDA 19 -#define WZRHPG300NH_GPIO_RTL8366_SCK 20 - -#define WZRHPG300NH_GPIO_74HC153_S0 9 -#define WZRHPG300NH_GPIO_74HC153_S1 11 -#define WZRHPG300NH_GPIO_74HC153_1Y 12 -#define WZRHPG300NH_GPIO_74HC153_2Y 14 - -#define WZRHPG300NH_GPIO_EXP_BASE 32 -#define WZRHPG300NH_GPIO_BTN_AOSS (WZRHPG300NH_GPIO_EXP_BASE + 0) -#define WZRHPG300NH_GPIO_BTN_RESET (WZRHPG300NH_GPIO_EXP_BASE + 1) -#define WZRHPG300NH_GPIO_BTN_ROUTER_ON (WZRHPG300NH_GPIO_EXP_BASE + 2) -#define WZRHPG300NH_GPIO_BTN_QOS_ON (WZRHPG300NH_GPIO_EXP_BASE + 3) -#define WZRHPG300NH_GPIO_BTN_USB (WZRHPG300NH_GPIO_EXP_BASE + 5) -#define WZRHPG300NH_GPIO_BTN_ROUTER_AUTO (WZRHPG300NH_GPIO_EXP_BASE + 6) -#define WZRHPG300NH_GPIO_BTN_QOS_OFF (WZRHPG300NH_GPIO_EXP_BASE + 7) - -#define WZRHPG300NH_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH_KEYS_POLL_INTERVAL) - -#define WZRHPG300NH_MAC_OFFSET 0x20c - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition wzrhpg300nh_flash_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x0040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x0040000, - .size = 0x0020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "kernel", - .offset = 0x0060000, - .size = 0x0100000, - }, { - .name = "rootfs", - .offset = 0x0160000, - .size = 0x1e60000, - }, { - .name = "user_property", - .offset = 0x1fc0000, - .size = 0x0020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "art", - .offset = 0x1fe0000, - .size = 0x0020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x0060000, - .size = 0x1f60000, - } -}; -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct ar91xx_flash_platform_data wzrhpg300nh_flash_data = { - .width = 2, -#ifdef CONFIG_MTD_PARTITIONS - .parts = wzrhpg300nh_flash_partitions, - .nr_parts = ARRAY_SIZE(wzrhpg300nh_flash_partitions), -#endif -}; - -#define WZRHPG300NH_FLASH_BASE 0x1e000000 -#define WZRHPG300NH_FLASH_SIZE (32 * 1024 * 1024) - -static struct resource wzrhpg300nh_flash_resources[] = { - [0] = { - .start = WZRHPG300NH_FLASH_BASE, - .end = WZRHPG300NH_FLASH_BASE + WZRHPG300NH_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device wzrhpg300nh_flash_device = { - .name = "ar91xx-flash", - .id = -1, - .resource = wzrhpg300nh_flash_resources, - .num_resources = ARRAY_SIZE(wzrhpg300nh_flash_resources), - .dev = { - .platform_data = &wzrhpg300nh_flash_data, - } -}; - -static struct gpio_led wzrhpg300nh_leds_gpio[] __initdata = { - { - .name = "buffalo:orange:security", - .gpio = WZRHPG300NH_GPIO_LED_SECURITY, - .active_low = 1, - }, { - .name = "buffalo:green:wireless", - .gpio = WZRHPG300NH_GPIO_LED_WIRELESS, - .active_low = 1, - }, { - .name = "buffalo:green:router", - .gpio = WZRHPG300NH_GPIO_LED_ROUTER, - .active_low = 1, - }, { - .name = "buffalo:red:diag", - .gpio = WZRHPG300NH_GPIO_LED_DIAG, - .active_low = 1, - }, { - .name = "buffalo:blue:usb", - .gpio = WZRHPG300NH_GPIO_LED_USB, - .active_low = 1, - } -}; - -static struct gpio_keys_button wzrhpg300nh_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = WZRHPG300NH_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "aoss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = WZRHPG300NH_GPIO_BTN_AOSS, - .active_low = 1, - }, { - .desc = "usb", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = WZRHPG300NH_GPIO_BTN_USB, - .active_low = 1, - }, { - .desc = "qos_on", - .type = EV_KEY, - .code = BTN_3, - .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = WZRHPG300NH_GPIO_BTN_QOS_ON, - .active_low = 0, - }, { - .desc = "qos_off", - .type = EV_KEY, - .code = BTN_4, - .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = WZRHPG300NH_GPIO_BTN_QOS_OFF, - .active_low = 0, - }, { - .desc = "router_on", - .type = EV_KEY, - .code = BTN_5, - .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_ON, - .active_low = 0, - }, { - .desc = "router_auto", - .type = EV_KEY, - .code = BTN_6, - .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_AUTO, - .active_low = 0, - } -}; - -static struct nxp_74hc153_platform_data wzrhpg300nh_74hc153_data = { - .gpio_base = WZRHPG300NH_GPIO_EXP_BASE, - .gpio_pin_s0 = WZRHPG300NH_GPIO_74HC153_S0, - .gpio_pin_s1 = WZRHPG300NH_GPIO_74HC153_S1, - .gpio_pin_1y = WZRHPG300NH_GPIO_74HC153_1Y, - .gpio_pin_2y = WZRHPG300NH_GPIO_74HC153_2Y, -}; - -static struct platform_device wzrhpg300nh_74hc153_device = { - .name = NXP_74HC153_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &wzrhpg300nh_74hc153_data, - } -}; - -static struct rtl8366_platform_data wzrhpg300nh_rtl8366_data = { - .gpio_sda = WZRHPG300NH_GPIO_RTL8366_SDA, - .gpio_sck = WZRHPG300NH_GPIO_RTL8366_SCK, -}; - -static struct platform_device wzrhpg300nh_rtl8366s_device = { - .name = RTL8366S_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &wzrhpg300nh_rtl8366_data, - } -}; - -static struct platform_device wzrhpg300nh_rtl8366rb_device = { - .name = RTL8366RB_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &wzrhpg300nh_rtl8366_data, - } -}; - -static void __init wzrhpg300nh_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - u8 *mac = eeprom + WZRHPG300NH_MAC_OFFSET; - bool hasrtl8366rb = false; - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); - - if (rtl8366_smi_detect(&wzrhpg300nh_rtl8366_data) == RTL8366_TYPE_RB) - hasrtl8366rb = true; - - if (hasrtl8366rb) { - ar71xx_eth0_pll_data.pll_1000 = 0x1f000000; - ar71xx_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev; - ar71xx_eth1_pll_data.pll_1000 = 0x100; - ar71xx_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev; - } else { - ar71xx_eth0_pll_data.pll_1000 = 0x1e000100; - ar71xx_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev; - ar71xx_eth1_pll_data.pll_1000 = 0x1e000100; - ar71xx_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev; - } - - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.speed = SPEED_1000; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth1_data.phy_mask = 0x10; - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ar71xx_add_device_usb(); - ar9xxx_add_device_wmac(eeprom, NULL); - - platform_device_register(&wzrhpg300nh_74hc153_device); - platform_device_register(&wzrhpg300nh_flash_device); - - if (hasrtl8366rb) - platform_device_register(&wzrhpg300nh_rtl8366rb_device); - else - platform_device_register(&wzrhpg300nh_rtl8366s_device); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh_leds_gpio), - wzrhpg300nh_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, WZRHPG300NH_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wzrhpg300nh_gpio_keys), - wzrhpg300nh_gpio_keys); - -} - -MIPS_MACHINE(AR71XX_MACH_WZR_HP_G300NH, "WZR-HP-G300NH", - "Buffalo WZR-HP-G300NH", wzrhpg300nh_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh2.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh2.c deleted file mode 100644 index ad1a0338b9..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh2.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * Buffalo WZR-HP-G300NH2 board support - * - * Copyright (C) 2011 Felix Fietkau - * Copyright (C) 2011 Mark Deneen - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include - -#include -#include -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-ap91-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" - - -#define WZRHPG300NH2_MAC_OFFSET 0x20c -#define WZRHPG300NH2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH2_KEYS_POLL_INTERVAL) - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition wzrhpg300nh2_flash_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x0040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x0040000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "art", - .offset = 0x0050000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "kernel", - .offset = 0x0060000, - .size = 0x0100000, - }, { - .name = "rootfs", - .offset = 0x0160000, - .size = 0x1e90000, - }, { - .name = "user_property", - .offset = 0x1ff0000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x0060000, - .size = 0x1f90000, - } -}; - -#endif /* CONFIG_MTD_PARTITIONS */ - - - -static struct flash_platform_data wzrhpg300nh2_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = wzrhpg300nh2_flash_partitions, - .nr_parts = ARRAY_SIZE(wzrhpg300nh2_flash_partitions), -#endif -}; - - -static struct gpio_led wzrhpg300nh2_leds_gpio[] __initdata = { - { - .name = "buffalo:red:diag", - .gpio = 16, - .active_low = 1, - }, -}; - -static struct gpio_led wzrhpg300nh2_wmac_leds_gpio[] = { - { - .name = "buffalo:blue:usb", - .gpio = 4, - .active_low = 1, - }, - { - .name = "buffalo:orange:security", - .gpio = 6, - .active_low = 1, - }, - { - .name = "buffalo:green:router", - .gpio = 7, - .active_low = 1, - }, - { - .name = "buffalo:blue:movie_engine_on", - .gpio = 8, - .active_low = 1, - }, - { - .name = "buffalo:blue:movie_engine_off", - .gpio = 9, - .active_low = 1, - }, -}; - -/* The AOSS button is wmac gpio 12 */ -static struct gpio_keys_button wzrhpg300nh2_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, - .gpio = 1, - .active_low = 1, - }, { - .desc = "usb", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, - .gpio = 7, - .active_low = 1, - }, { - .desc = "qos", - .type = EV_KEY, - .code = BTN_3, - .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, - .gpio = 11, - .active_low = 0, - }, { - .desc = "router_on", - .type = EV_KEY, - .code = BTN_5, - .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, - .gpio = 8, - .active_low = 0, - }, -}; - - -static void __init wzrhpg300nh2_setup(void) -{ - - u8 *eeprom = (u8 *) KSEG1ADDR(0x1f051000); - u8 *mac0 = eeprom + WZRHPG300NH2_MAC_OFFSET; - /* There is an eth1 but it is not connected to the switch */ - - ar71xx_add_device_m25p80_multi(&wzrhpg300nh2_flash_data); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac0, 0); - ar71xx_add_device_mdio(0, ~(BIT(0))); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac0, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.speed = SPEED_1000; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - ar71xx_eth0_data.phy_mask = BIT(0); - - ar71xx_add_device_eth(0); - ar71xx_add_device_usb(); - /* gpio13 is usb power. Turn it on. */ - gpio_request(13, "usb"); - gpio_direction_output(13, 1); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh2_leds_gpio), - wzrhpg300nh2_leds_gpio); - ar71xx_register_gpio_keys_polled(-1, WZRHPG300NH2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wzrhpg300nh2_gpio_keys), - wzrhpg300nh2_gpio_keys); - ap91_pci_setup_wmac_led_pin(5); - ap91_pci_setup_wmac_leds(wzrhpg300nh2_wmac_leds_gpio, - ARRAY_SIZE(wzrhpg300nh2_wmac_leds_gpio)); - - ap91_pci_init(eeprom, mac0); -} - -MIPS_MACHINE(AR71XX_MACH_WZR_HP_G300NH2, "WZR-HP-G300NH2", - "Buffalo WZR-HP-G300NH2", wzrhpg300nh2_setup); - diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g450h.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g450h.c deleted file mode 100644 index 03376bb921..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g450h.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * Buffalo WZR-HP-G450G board support - * - * Copyright (C) 2011 Felix Fietkau - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ap91-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" - -#define WZRHPG450H_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WZRHPG450H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG450H_KEYS_POLL_INTERVAL) - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition wzrhpg450h_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x0040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x0040000, - .size = 0x0010000, - }, { - .name = "ART", - .offset = 0x0050000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "uImage", - .offset = 0x0060000, - .size = 0x0100000, - }, { - .name = "rootfs", - .offset = 0x0160000, - .size = 0x1e80000, - }, { - .name = "user_property", - .offset = 0x1fe0000, - .size = 0x0020000, - }, { - .name = "firmware", - .offset = 0x0060000, - .size = 0x1f80000, - } -}; -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data wzrhpg450h_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = wzrhpg450h_partitions, - .nr_parts = ARRAY_SIZE(wzrhpg450h_partitions), -#endif -}; - -static struct gpio_led wzrhpg450h_leds_gpio[] __initdata = { - { - .name = "buffalo:red:diag", - .gpio = 14, - .active_low = 1, - }, - { - .name = "buffalo:orange:security", - .gpio = 13, - .active_low = 1, - }, -}; - - -static struct gpio_led wzrhpg450h_wmac_leds_gpio[] = { - { - .name = "buffalo:blue:movie_engine", - .gpio = 13, - .active_low = 1, - }, - { - .name = "buffalo:green:router", - .gpio = 14, - .active_low = 1, - }, -}; - -static struct gpio_keys_button wzrhpg450h_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 6, - .active_low = 1, - }, { - .desc = "usb", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 1, - .active_low = 1, - }, { - .desc = "aoss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 8, - .active_low = 1, - }, { - .desc = "movie_engine", - .type = EV_KEY, - .code = BTN_6, - .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 7, - .active_low = 0, - }, { - .desc = "router_off", - .type = EV_KEY, - .code = BTN_5, - .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 12, - .active_low = 0, - } -}; - - -static void __init wzrhpg450h_init(void) -{ - u8 *ee = (u8 *) KSEG1ADDR(0x1f051000); - u8 *mac = (u8 *) ee + 2; - - ar71xx_add_device_m25p80_multi(&wzrhpg450h_flash_data); - - ar71xx_add_device_mdio(0, ~BIT(0)); - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.speed = SPEED_1000; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - ar71xx_eth0_data.phy_mask = BIT(0); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpg450h_leds_gpio), - wzrhpg450h_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, WZRHPG450H_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wzrhpg450h_gpio_keys), - wzrhpg450h_gpio_keys); - - ar71xx_add_device_eth(0); - - ar71xx_add_device_usb(); - gpio_request(16, "usb"); - gpio_direction_output(16, 1); - - ap91_pci_init(ee, NULL); - ap91_pci_setup_wmac_led_pin(15); - ap91_pci_setup_wmac_leds(wzrhpg450h_wmac_leds_gpio, - ARRAY_SIZE(wzrhpg450h_wmac_leds_gpio)); -} - -MIPS_MACHINE(AR71XX_MACH_WZR_HP_G450H, "WZR-HP-G450H", "Buffalo WZR-HP-G450H", - wzrhpg450h_init); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-zcn-1523h.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-zcn-1523h.c deleted file mode 100644 index 7828b37f5d..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-zcn-1523h.c +++ /dev/null @@ -1,208 +0,0 @@ -/* - * Zcomax ZCN-1523H-2-8/5-16 board support - * - * Copyright (C) 2010 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ap91-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" - -#define ZCN_1523H_GPIO_BTN_RESET 0 -#define ZCN_1523H_GPIO_LED_INIT 11 -#define ZCN_1523H_GPIO_LED_LAN1 17 - -#define ZCN_1523H_2_GPIO_LED_WEAK 13 -#define ZCN_1523H_2_GPIO_LED_MEDIUM 14 -#define ZCN_1523H_2_GPIO_LED_STRONG 15 - -#define ZCN_1523H_5_GPIO_LED_UNKNOWN 1 -#define ZCN_1523H_5_GPIO_LED_LAN2 13 -#define ZCN_1523H_5_GPIO_LED_WEAK 14 -#define ZCN_1523H_5_GPIO_LED_MEDIUM 15 -#define ZCN_1523H_5_GPIO_LED_STRONG 16 - -#define ZCN_1523H_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ZCN_1523H_KEYS_DEBOUNCE_INTERVAL (3 * ZCN_1523H_KEYS_POLL_INTERVAL) - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition zcn_1523h_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x040000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "rootfs", - .offset = 0x050000, - .size = 0x610000, - }, { - .name = "kernel", - .offset = 0x660000, - .size = 0x170000, - }, { - .name = "configure", - .offset = 0x7d0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "mfg", - .offset = 0x7e0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "eeprom", - .offset = 0x7f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x050000, - .size = 0x780000, - } -}; -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data zcn_1523h_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = zcn_1523h_partitions, - .nr_parts = ARRAY_SIZE(zcn_1523h_partitions), -#endif -}; - -static struct gpio_keys_button zcn_1523h_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ZCN_1523H_KEYS_DEBOUNCE_INTERVAL, - .gpio = ZCN_1523H_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct gpio_led zcn_1523h_leds_gpio[] __initdata = { - { - .name = "zcn-1523h:amber:init", - .gpio = ZCN_1523H_GPIO_LED_INIT, - .active_low = 1, - }, { - .name = "zcn-1523h:green:lan1", - .gpio = ZCN_1523H_GPIO_LED_LAN1, - .active_low = 1, - } -}; - -static struct gpio_led zcn_1523h_2_leds_gpio[] __initdata = { - { - .name = "zcn-1523h:red:weak", - .gpio = ZCN_1523H_2_GPIO_LED_WEAK, - .active_low = 1, - }, { - .name = "zcn-1523h:amber:medium", - .gpio = ZCN_1523H_2_GPIO_LED_MEDIUM, - .active_low = 1, - }, { - .name = "zcn-1523h:green:strong", - .gpio = ZCN_1523H_2_GPIO_LED_STRONG, - .active_low = 1, - } -}; - -static struct gpio_led zcn_1523h_5_leds_gpio[] __initdata = { - { - .name = "zcn-1523h:red:weak", - .gpio = ZCN_1523H_5_GPIO_LED_WEAK, - .active_low = 1, - }, { - .name = "zcn-1523h:amber:medium", - .gpio = ZCN_1523H_5_GPIO_LED_MEDIUM, - .active_low = 1, - }, { - .name = "zcn-1523h:green:strong", - .gpio = ZCN_1523H_5_GPIO_LED_STRONG, - .active_low = 1, - }, { - .name = "zcn-1523h:green:lan2", - .gpio = ZCN_1523H_5_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "zcn-1523h:amber:unknown", - .gpio = ZCN_1523H_5_GPIO_LED_UNKNOWN, - } -}; - -static void __init zcn_1523h_generic_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0004); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ar71xx_add_device_m25p80(&zcn_1523h_flash_data); - - ar71xx_add_device_leds_gpio(0, ARRAY_SIZE(zcn_1523h_leds_gpio), - zcn_1523h_leds_gpio); - - ar71xx_register_gpio_keys_polled(-1, ZCN_1523H_KEYS_POLL_INTERVAL, - ARRAY_SIZE(zcn_1523h_gpio_keys), - zcn_1523h_gpio_keys); - - ap91_pci_init(ee, mac); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); - - ar71xx_add_device_mdio(0, 0x0); - - /* LAN1 port */ - ar71xx_add_device_eth(0); -} - -static void __init zcn_1523h_2_setup(void) -{ - zcn_1523h_generic_setup(); - ap91_pci_setup_wmac_gpio(BIT(9), 0); - - ar71xx_add_device_leds_gpio(1, ARRAY_SIZE(zcn_1523h_2_leds_gpio), - zcn_1523h_2_leds_gpio); -} - -MIPS_MACHINE(AR71XX_MACH_ZCN_1523H_2, "ZCN-1523H-2", "Zcomax ZCN-1523H-2", - zcn_1523h_2_setup); - -static void __init zcn_1523h_5_setup(void) -{ - zcn_1523h_generic_setup(); - ap91_pci_setup_wmac_gpio(BIT(8), 0); - - ar71xx_add_device_leds_gpio(1, ARRAY_SIZE(zcn_1523h_5_leds_gpio), - zcn_1523h_5_leds_gpio); - - /* LAN2 port */ - ar71xx_add_device_eth(1); -} - -MIPS_MACHINE(AR71XX_MACH_ZCN_1523H_5, "ZCN-1523H-5", "Zcomax ZCN-1523H-5", - zcn_1523h_5_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h deleted file mode 100644 index f114017ecc..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Atheros AR71xx machine type definitions - * - * Copyright (C) 2008-2010 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _AR71XX_MACHTYPE_H -#define _AR71XX_MACHTYPE_H - -#include - -enum ar71xx_mach_type { - AR71XX_MACH_GENERIC = 0, - AR71XX_MACH_ALFA_AP96, /* ALFA Network AP96 board */ - AR71XX_MACH_ALFA_NX, /* ALFA Network N2/N5 board */ - AR71XX_MACH_ALL0258N, /* Allnet ALL0258N */ - AR71XX_MACH_AP113, /* Atheros AP113 */ - AR71XX_MACH_AP121, /* Atheros AP121 */ - AR71XX_MACH_AP121_MINI, /* Atheros AP121-MINI */ - AR71XX_MACH_AP81, /* Atheros AP81 */ - AR71XX_MACH_AP83, /* Atheros AP83 */ - AR71XX_MACH_AP96, /* Atheros AP96 */ - AR71XX_MACH_AW_NR580, /* AzureWave AW-NR580 */ - AR71XX_MACH_DB120, /* Atheros DB120 (AR934x based) */ - AR71XX_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ - AR71XX_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ - AR71XX_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */ - AR71XX_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ - AR71XX_MACH_EAP7660D, /* Senao EAP7660D */ - AR71XX_MACH_JA76PF, /* jjPlus JA76PF */ - AR71XX_MACH_JWAP003, /* jjPlus JWAP003 */ - AR71XX_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */ - AR71XX_MACH_MZK_W04NU, /* Planex MZK-W04NU */ - AR71XX_MACH_MZK_W300NH, /* Planex MZK-W300NH */ - AR71XX_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */ - AR71XX_MACH_OM2P, /* OpenMesh OM2P */ - AR71XX_MACH_PB42, /* Atheros PB42 */ - AR71XX_MACH_PB44, /* Atheros PB44 */ - AR71XX_MACH_PB92, /* Atheros PB92 */ - AR71XX_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */ - AR71XX_MACH_RB_411U, /* MikroTik RouterBOARD 411U */ - AR71XX_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */ - AR71XX_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */ - AR71XX_MACH_RB_450G, /* MikroTik RouterBOARD 450G */ - AR71XX_MACH_RB_450, /* MikroTik RouterBOARD 450 */ - AR71XX_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */ - AR71XX_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */ - AR71XX_MACH_RB_750, /* MikroTik RouterBOARD 750 */ - AR71XX_MACH_RW2458N, /* Redwave RW2458N */ - AR71XX_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */ - AR71XX_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */ - AR71XX_MACH_TL_MR11U, /* TP-LINK TL-MR11U */ - AR71XX_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */ - AR71XX_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */ - AR71XX_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */ - AR71XX_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ - AR71XX_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */ - AR71XX_MACH_TL_WR1043ND, /* TP-LINK TL-WR1041ND */ - AR71XX_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */ - AR71XX_MACH_TL_WR703N, /* TP-LINK TL-WR703N */ - AR71XX_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */ - AR71XX_MACH_TL_WR741ND_V4, /* TP-LINK TL-WR741ND v4*/ - AR71XX_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */ - AR71XX_MACH_TL_WR841N_V7, /* TP-LINK TL-WR841N/ND v7 */ - AR71XX_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ - AR71XX_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */ - AR71XX_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ - AR71XX_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */ - AR71XX_MACH_UBNT_LSX, /* Ubiquiti LSX */ - AR71XX_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ - AR71XX_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */ - AR71XX_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */ - AR71XX_MACH_UBNT_RS, /* Ubiquiti RouterStation */ - AR71XX_MACH_UBNT_UNIFI, /* Unifi */ - AR71XX_MACH_WHR_G301N, /* Buffalo WHR-G301N */ - AR71XX_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */ - AR71XX_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */ - AR71XX_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */ - AR71XX_MACH_WNR2000, /* NETGEAR WNR2000 */ - AR71XX_MACH_WP543, /* Compex WP543 */ - AR71XX_MACH_WPE72, /* Compex WPE72 */ - AR71XX_MACH_WRT160NL, /* Linksys WRT160NL */ - AR71XX_MACH_WRT400N, /* Linksys WRT400N */ - AR71XX_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */ - AR71XX_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ - AR71XX_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */ - AR71XX_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */ - AR71XX_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ - AR71XX_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */ -}; - -#endif /* _AR71XX_MACHTYPE_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/nvram.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/nvram.c deleted file mode 100644 index dfab246464..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/nvram.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Atheros AR71xx minimal nvram support - * - * Copyright (C) 2009 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include - -#include "nvram.h" - -char *nvram_find_var(const char *name, const char *buf, unsigned buf_len) -{ - unsigned len = strlen(name); - char *cur, *last; - - if (buf_len == 0 || len == 0) - return NULL; - - if (buf_len < len) - return NULL; - - if (len == 1) - return memchr(buf, (int) *name, buf_len); - - last = (char *) buf + buf_len - len; - for (cur = (char *) buf; cur <= last; cur++) - if (cur[0] == name[0] && memcmp(cur, name, len) == 0) - return cur + len; - - return NULL; -} - -int nvram_parse_mac_addr(const char *nvram, unsigned nvram_len, - const char *name, char *mac) -{ - char *buf; - char *mac_str; - int ret; - int t; - - buf = vmalloc(nvram_len); - if (!buf) - return -ENOMEM; - - memcpy(buf, nvram, nvram_len); - buf[nvram_len - 1] = '\0'; - - mac_str = nvram_find_var(name, buf, nvram_len); - if (!mac_str) { - ret = -EINVAL; - goto free; - } - - t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", - &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]); - - if (t != 6) { - ret = -EINVAL; - goto free; - } - - ret = 0; - -free: - vfree(buf); - return ret; -} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/nvram.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/nvram.h deleted file mode 100644 index b025d3fc93..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/nvram.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Atheros AR71xx minimal nvram support - * - * Copyright (C) 2009 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _AR71XX_NVRAM_H -#define _AR71XX_NVRAM_H - -char *nvram_find_var(const char *name, const char *buf, - unsigned buf_len) __init; -int nvram_parse_mac_addr(const char *nvram, unsigned nvram_len, - const char *name, char *mac) __init; - -#endif /* _AR71XX_NVRAM_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.c deleted file mode 100644 index 21f5a6816e..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * Atheros AP94 reference board PCI initialization - * - * Copyright (C) 2009-2010 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include - -#include -#include - -struct ath9k_fixup { - u16 *cal_data; - unsigned slot; -}; - -static int ath9k_num_fixups; -static struct ath9k_fixup ath9k_fixups[2]; - -static void ath9k_pci_fixup(struct pci_dev *dev) -{ - void __iomem *mem; - u16 *cal_data = NULL; - u16 cmd; - u32 bar0; - u32 val; - unsigned i; - - for (i = 0; i < ath9k_num_fixups; i++) { - if (ath9k_fixups[i].cal_data == NULL) - continue; - - if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn)) - continue; - - cal_data = ath9k_fixups[i].cal_data; - break; - } - - if (cal_data == NULL) - return; - - if (*cal_data != 0xa55a) { - pr_err("pci %s: invalid calibration data\n", pci_name(dev)); - return; - } - - pr_info("pci %s: fixup device configuration\n", pci_name(dev)); - - mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000); - if (!mem) { - pr_err("pci %s: ioremap error\n", pci_name(dev)); - return; - } - - pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0); - - switch (ar71xx_soc) { - case AR71XX_SOC_AR7161: - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, - AR71XX_PCI_MEM_BASE); - break; - case AR71XX_SOC_AR7240: - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0xffff); - break; - - case AR71XX_SOC_AR7241: - case AR71XX_SOC_AR7242: - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x1000ffff); - break; - - default: - BUG(); - } - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_write_config_word(dev, PCI_COMMAND, cmd); - - /* set pointer to first reg address */ - cal_data += 3; - while (*cal_data != 0xffff) { - u32 reg; - reg = *cal_data++; - val = *cal_data++; - val |= (*cal_data++) << 16; - - __raw_writel(val, mem + reg); - udelay(100); - } - - pci_read_config_dword(dev, PCI_VENDOR_ID, &val); - dev->vendor = val & 0xffff; - dev->device = (val >> 16) & 0xffff; - - pci_read_config_dword(dev, PCI_CLASS_REVISION, &val); - dev->revision = val & 0xff; - dev->class = val >> 8; /* upper 3 bytes */ - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); - pci_write_config_word(dev, PCI_COMMAND, cmd); - - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0); - - iounmap(mem); -} -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup); - -void __init pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) -{ - if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups)) - return; - - ath9k_fixups[ath9k_num_fixups].slot = slot; - ath9k_fixups[ath9k_num_fixups].cal_data = cal_data; - ath9k_num_fixups++; -} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.h deleted file mode 100644 index 5794941f08..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _PCI_ATH9K_FIXUP -#define _PCI_ATH9K_FIXUP - -void pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) __init; - -#endif /* _PCI_ATH9K_FIXUP */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/pci.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/pci.c deleted file mode 100644 index f3c6452418..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/pci.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Atheros AR71xx PCI setup code - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Parts of this file are based on Atheros' 2.6.15 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include - -#include -#include - -unsigned ar71xx_pci_nr_irqs __initdata; -struct ar71xx_pci_irq *ar71xx_pci_irq_map __initdata; - -int (*ar71xx_pci_plat_dev_init)(struct pci_dev *dev); - -static int ar71xx_be_handler(struct pt_regs *regs, int is_fixup) -{ - int err = 0; - - err = ar71xx_pci_be_handler(is_fixup); - - return (is_fixup && !err) ? MIPS_BE_FIXUP : MIPS_BE_FATAL; -} - -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - if (ar71xx_pci_plat_dev_init) - return ar71xx_pci_plat_dev_init(dev); - - return 0; -} - -int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin) -{ - int ret = 0; - - switch (ar71xx_soc) { - case AR71XX_SOC_AR7130: - case AR71XX_SOC_AR7141: - case AR71XX_SOC_AR7161: - ret = ar71xx_pcibios_map_irq(dev, slot, pin); - break; - - case AR71XX_SOC_AR7240: - case AR71XX_SOC_AR7241: - case AR71XX_SOC_AR7242: - case AR71XX_SOC_AR9342: - case AR71XX_SOC_AR9344: - ret = ar724x_pcibios_map_irq(dev, slot, pin); - break; - - default: - break; - } - - return ret; -} - -int __init ar71xx_pci_init(unsigned nr_irqs, struct ar71xx_pci_irq *map) -{ - u32 t; - int ret = 0; - - switch (ar71xx_soc) { - case AR71XX_SOC_AR7130: - case AR71XX_SOC_AR7141: - case AR71XX_SOC_AR7161: - board_be_handler = ar71xx_be_handler; - ret = ar71xx_pcibios_init(); - break; - - case AR71XX_SOC_AR7240: - case AR71XX_SOC_AR7241: - case AR71XX_SOC_AR7242: - ret = ar724x_pcibios_init(AR71XX_CPU_IRQ_IP2); - break; - - case AR71XX_SOC_AR9342: - case AR71XX_SOC_AR9344: - t = ar71xx_reset_rr(AR934X_RESET_REG_BOOTSTRAP); - if (t & AR934X_BOOTSTRAP_PCIE_RC) { - ret = ar724x_pcibios_init(AR934X_IP2_IRQ_PCIE); - break; - } - - /* fall through */ - default: - return 0; - } - - ar71xx_pci_nr_irqs = nr_irqs; - ar71xx_pci_irq_map = map; - - return ret; -} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/prom.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/prom.c deleted file mode 100644 index 5df8121189..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/prom.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * Atheros AR71xx SoC specific prom routines - * - * Copyright (C) 2008-2010 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include - -#include -#include -#include - -#include - -static inline int is_valid_ram_addr(void *addr) -{ - if (((u32) addr > KSEG0) && - ((u32) addr < (KSEG0 + AR71XX_MEM_SIZE_MAX))) - return 1; - - if (((u32) addr > KSEG1) && - ((u32) addr < (KSEG1 + AR71XX_MEM_SIZE_MAX))) - return 1; - - return 0; -} - -static char ar71xx_cmdline_buf[COMMAND_LINE_SIZE] __initdata; -static void __init ar71xx_prom_append_cmdline(const char *name, - const char *value) -{ - snprintf(ar71xx_cmdline_buf, sizeof(ar71xx_cmdline_buf), - " %s=%s", name, value); - strlcat(arcs_cmdline, ar71xx_cmdline_buf, sizeof(arcs_cmdline)); -} - -static const char * __init ar71xx_prom_find_env(char **envp, const char *name) -{ - const char *ret = NULL; - int len; - char **p; - - if (!is_valid_ram_addr(envp)) - return NULL; - - len = strlen(name); - for (p = envp; is_valid_ram_addr(*p); p++) { - if (strncmp(name, *p, len) == 0 && (*p)[len] == '=') { - ret = *p + len + 1; - break; - } - - /* RedBoot env comes in pointer pairs - key, value */ - if (strncmp(name, *p, len) == 0 && (*p)[len] == 0) - if (is_valid_ram_addr(*(++p))) { - ret = *p; - break; - } - } - - return ret; -} - -#ifdef CONFIG_IMAGE_CMDLINE_HACK -extern char __image_cmdline[]; - -static int __init ar71xx_use__image_cmdline(void) -{ - char *p = __image_cmdline; - int replace = 0; - - if (*p == '-') { - replace = 1; - p++; - } - - if (*p == '\0') - return 0; - - if (replace) { - strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline)); - } else { - strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); - strlcat(arcs_cmdline, p, sizeof(arcs_cmdline)); - } - - return 1; -} -#else -static inline int ar71xx_use__image_cmdline(void) { return 0; } -#endif - -static int __init ar71xx_prom_init_myloader(void) -{ - struct myloader_info *mylo; - char mac_buf[32]; - unsigned char *mac; - - mylo = myloader_get_info(); - if (!mylo) - return 0; - - switch (mylo->did) { - case DEVID_COMPEX_WP543: - ar71xx_prom_append_cmdline("board", "WP543"); - break; - case DEVID_COMPEX_WPE72: - ar71xx_prom_append_cmdline("board", "WPE72"); - break; - default: - printk(KERN_WARNING "prom: unknown device id: %x\n", - mylo->did); - return 0; - } - - mac = mylo->macs[0]; - snprintf(mac_buf, sizeof(mac_buf), "%02x:%02x:%02x:%02x:%02x:%02x", - mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); - - ar71xx_prom_append_cmdline("ethaddr", mac_buf); - - ar71xx_use__image_cmdline(); - - return 1; -} - -static __init void ar71xx_prom_init_cmdline(int argc, char **argv) -{ - int i; - - if (ar71xx_use__image_cmdline()) - return; - - if (!is_valid_ram_addr(argv)) - return; - - for (i = 0; i < argc; i++) - if (is_valid_ram_addr(argv[i])) { - strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); - strlcat(arcs_cmdline, argv[i], sizeof(arcs_cmdline)); - } -} - -void __init prom_init(void) -{ - const char *env; - char **envp; - - printk(KERN_DEBUG "prom: fw_arg0=%08x, fw_arg1=%08x, " - "fw_arg2=%08x, fw_arg3=%08x\n", - (unsigned int)fw_arg0, (unsigned int)fw_arg1, - (unsigned int)fw_arg2, (unsigned int)fw_arg3); - - - if (ar71xx_prom_init_myloader()) - return; - - ar71xx_prom_init_cmdline(fw_arg0, (char **)fw_arg1); - - envp = (char **)fw_arg2; - if (!strstr(arcs_cmdline, "ethaddr=")) { - env = ar71xx_prom_find_env(envp, "ethaddr"); - if (env) - ar71xx_prom_append_cmdline("ethaddr", env); - } - - if (!strstr(arcs_cmdline, "board=")) { - env = ar71xx_prom_find_env(envp, "board"); - if (env) { - /* Workaround for buggy bootloaders */ - if (strcmp(env, "RouterStation") == 0 || - strcmp(env, "Ubiquiti AR71xx-based board") == 0) - env = "UBNT-RS"; - - if (strcmp(env, "RouterStation PRO") == 0) - env = "UBNT-RSPRO"; - - ar71xx_prom_append_cmdline("board", env); - } - } -} - -void __init prom_free_prom_memory(void) -{ - /* We do not have to prom memory to free */ -} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/setup.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/setup.c deleted file mode 100644 index b1829a6da2..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/setup.c +++ /dev/null @@ -1,482 +0,0 @@ -/* - * Atheros AR71xx SoC specific setup - * - * Copyright (C) 2010-2011 Jaiganesh Narayanan - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Parts of this file are based on Atheros 2.6.15 BSP - * Parts of this file are based on Atheros 2.6.31 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include - -#include -#include /* for mips_hpt_frequency */ -#include /* for _machine_{restart,halt} */ -#include - -#include - -#include "machtype.h" -#include "devices.h" - -#define AR71XX_SYS_TYPE_LEN 64 - -u32 ar71xx_cpu_freq; -EXPORT_SYMBOL_GPL(ar71xx_cpu_freq); - -u32 ar71xx_ahb_freq; -EXPORT_SYMBOL_GPL(ar71xx_ahb_freq); - -u32 ar71xx_ddr_freq; -EXPORT_SYMBOL_GPL(ar71xx_ddr_freq); - -u32 ar71xx_ref_freq; -EXPORT_SYMBOL_GPL(ar71xx_ref_freq); - -enum ar71xx_soc_type ar71xx_soc; -EXPORT_SYMBOL_GPL(ar71xx_soc); - -u32 ar71xx_soc_rev; -EXPORT_SYMBOL_GPL(ar71xx_soc_rev); - -static char ar71xx_sys_type[AR71XX_SYS_TYPE_LEN]; - -static void ar71xx_restart(char *command) -{ - ar71xx_device_stop(RESET_MODULE_FULL_CHIP); - for (;;) - if (cpu_wait) - cpu_wait(); -} - -static void ar71xx_halt(void) -{ - while (1) - cpu_wait(); -} - -static void __init ar71xx_detect_mem_size(void) -{ - unsigned long size; - - for (size = AR71XX_MEM_SIZE_MIN; size < AR71XX_MEM_SIZE_MAX; - size <<= 1) { - if (!memcmp(ar71xx_detect_mem_size, - ar71xx_detect_mem_size + size, 1024)) - break; - } - - add_memory_region(0, size, BOOT_MEM_RAM); -} - -static void __init ar71xx_detect_sys_type(void) -{ - char *chip = "????"; - u32 id; - u32 major; - u32 minor; - u32 rev = 0; - - id = ar71xx_reset_rr(AR71XX_RESET_REG_REV_ID); - major = id & REV_ID_MAJOR_MASK; - - switch (major) { - case REV_ID_MAJOR_AR71XX: - minor = id & AR71XX_REV_ID_MINOR_MASK; - rev = id >> AR71XX_REV_ID_REVISION_SHIFT; - rev &= AR71XX_REV_ID_REVISION_MASK; - switch (minor) { - case AR71XX_REV_ID_MINOR_AR7130: - ar71xx_soc = AR71XX_SOC_AR7130; - chip = "7130"; - break; - - case AR71XX_REV_ID_MINOR_AR7141: - ar71xx_soc = AR71XX_SOC_AR7141; - chip = "7141"; - break; - - case AR71XX_REV_ID_MINOR_AR7161: - ar71xx_soc = AR71XX_SOC_AR7161; - chip = "7161"; - break; - } - break; - - case REV_ID_MAJOR_AR7240: - ar71xx_soc = AR71XX_SOC_AR7240; - chip = "7240"; - rev = id & AR724X_REV_ID_REVISION_MASK; - break; - - case REV_ID_MAJOR_AR7241: - ar71xx_soc = AR71XX_SOC_AR7241; - chip = "7241"; - rev = id & AR724X_REV_ID_REVISION_MASK; - break; - - case REV_ID_MAJOR_AR7242: - ar71xx_soc = AR71XX_SOC_AR7242; - chip = "7242"; - rev = id & AR724X_REV_ID_REVISION_MASK; - break; - - case REV_ID_MAJOR_AR913X: - minor = id & AR91XX_REV_ID_MINOR_MASK; - rev = id >> AR91XX_REV_ID_REVISION_SHIFT; - rev &= AR91XX_REV_ID_REVISION_MASK; - switch (minor) { - case AR91XX_REV_ID_MINOR_AR9130: - ar71xx_soc = AR71XX_SOC_AR9130; - chip = "9130"; - break; - - case AR91XX_REV_ID_MINOR_AR9132: - ar71xx_soc = AR71XX_SOC_AR9132; - chip = "9132"; - break; - } - break; - - case REV_ID_MAJOR_AR9330: - ar71xx_soc = AR71XX_SOC_AR9330; - chip = "9330"; - rev = id & AR933X_REV_ID_REVISION_MASK; - break; - - case REV_ID_MAJOR_AR9331: - ar71xx_soc = AR71XX_SOC_AR9331; - chip = "9331"; - rev = id & AR933X_REV_ID_REVISION_MASK; - break; - - case REV_ID_MAJOR_AR9341: - ar71xx_soc = AR71XX_SOC_AR9341; - chip = "9341"; - rev = id & AR934X_REV_ID_REVISION_MASK; - break; - - case REV_ID_MAJOR_AR9342: - ar71xx_soc = AR71XX_SOC_AR9342; - chip = "9342"; - rev = id & AR934X_REV_ID_REVISION_MASK; - break; - - case REV_ID_MAJOR_AR9344: - ar71xx_soc = AR71XX_SOC_AR9344; - chip = "9344"; - rev = id & AR934X_REV_ID_REVISION_MASK; - break; - - default: - panic("ar71xx: unknown chip id:0x%08x\n", id); - } - - ar71xx_soc_rev = rev; - - sprintf(ar71xx_sys_type, "Atheros AR%s rev %u", chip, rev); - pr_info("SoC: %s\n", ar71xx_sys_type); -} - -static void __init ar934x_detect_sys_frequency(void) -{ - u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv; - u32 cpu_pll, ddr_pll; - u32 bootstrap; - - bootstrap = ar71xx_reset_rr(AR934X_RESET_REG_BOOTSTRAP); - if (bootstrap & AR934X_BOOTSTRAP_REF_CLK_40) - ar71xx_ref_freq = 40 * 1000 * 1000; - else - ar71xx_ref_freq = 25 * 1000 * 1000; - - pll = ar71xx_pll_rr(AR934X_PLL_REG_CPU_CONFIG); - out_div = AR934X_CPU_PLL_CFG_OUTDIV_GET(pll); - ref_div = AR934X_CPU_PLL_CFG_REFDIV_GET(pll); - nint = AR934X_CPU_PLL_CFG_NINT_GET(pll); - frac = AR934X_CPU_PLL_CFG_NFRAC_GET(pll); - - cpu_pll = nint * ar71xx_ref_freq / ref_div; - cpu_pll += frac * ar71xx_ref_freq / (ref_div * (2 << 6)); - cpu_pll /= (1 << out_div); - - pll = ar71xx_pll_rr(AR934X_PLL_REG_DDR_CONFIG); - out_div = AR934X_DDR_PLL_CFG_OUTDIV_GET(pll); - ref_div = AR934X_DDR_PLL_CFG_REFDIV_GET(pll); - nint = AR934X_DDR_PLL_CFG_NINT_GET(pll); - frac = AR934X_DDR_PLL_CFG_NFRAC_GET(pll); - - ddr_pll = nint * ar71xx_ref_freq / ref_div; - ddr_pll += frac * ar71xx_ref_freq / (ref_div * (2 << 10)); - ddr_pll /= (1 << out_div); - - clk_ctrl = ar71xx_pll_rr(AR934X_PLL_REG_DDR_CTRL_CLOCK); - - if (clk_ctrl & AR934X_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS) { - ar71xx_cpu_freq = ar71xx_ref_freq; - } else { - postdiv = AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_GET(clk_ctrl); - - if (clk_ctrl & AR934X_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL) - ar71xx_cpu_freq = cpu_pll / (postdiv + 1); - else - ar71xx_cpu_freq = ddr_pll / (postdiv + 1); - } - - if (clk_ctrl & AR934X_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS) { - ar71xx_ddr_freq = ar71xx_ref_freq; - } else { - postdiv = AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_GET(clk_ctrl); - - if (clk_ctrl & AR934X_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL) - ar71xx_ddr_freq = ddr_pll / (postdiv + 1); - else - ar71xx_ddr_freq = cpu_pll / (postdiv + 1); - } - - if (clk_ctrl & AR934X_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS) { - ar71xx_ahb_freq = ar71xx_ref_freq; - } else { - postdiv = AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_GET(clk_ctrl); - - if (clk_ctrl & AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL) - ar71xx_ahb_freq = ddr_pll / (postdiv + 1); - else - ar71xx_ahb_freq = cpu_pll / (postdiv + 1); - } -} - -static void __init ar91xx_detect_sys_frequency(void) -{ - u32 pll; - u32 freq; - u32 div; - - ar71xx_ref_freq = 5 * 1000 * 1000; - - pll = ar71xx_pll_rr(AR91XX_PLL_REG_CPU_CONFIG); - - div = ((pll >> AR91XX_PLL_DIV_SHIFT) & AR91XX_PLL_DIV_MASK); - freq = div * ar71xx_ref_freq; - - ar71xx_cpu_freq = freq; - - div = ((pll >> AR91XX_DDR_DIV_SHIFT) & AR91XX_DDR_DIV_MASK) + 1; - ar71xx_ddr_freq = freq / div; - - div = (((pll >> AR91XX_AHB_DIV_SHIFT) & AR91XX_AHB_DIV_MASK) + 1) * 2; - ar71xx_ahb_freq = ar71xx_cpu_freq / div; -} - -static void __init ar71xx_detect_sys_frequency(void) -{ - u32 pll; - u32 freq; - u32 div; - - ar71xx_ref_freq = 40 * 1000 * 1000; - - pll = ar71xx_pll_rr(AR71XX_PLL_REG_CPU_CONFIG); - - div = ((pll >> AR71XX_PLL_DIV_SHIFT) & AR71XX_PLL_DIV_MASK) + 1; - freq = div * ar71xx_ref_freq; - - div = ((pll >> AR71XX_CPU_DIV_SHIFT) & AR71XX_CPU_DIV_MASK) + 1; - ar71xx_cpu_freq = freq / div; - - div = ((pll >> AR71XX_DDR_DIV_SHIFT) & AR71XX_DDR_DIV_MASK) + 1; - ar71xx_ddr_freq = freq / div; - - div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2; - ar71xx_ahb_freq = ar71xx_cpu_freq / div; -} - -static void __init ar724x_detect_sys_frequency(void) -{ - u32 pll; - u32 freq; - u32 div; - - ar71xx_ref_freq = 5 * 1000 * 1000; - - pll = ar71xx_pll_rr(AR724X_PLL_REG_CPU_CONFIG); - - div = ((pll >> AR724X_PLL_DIV_SHIFT) & AR724X_PLL_DIV_MASK); - freq = div * ar71xx_ref_freq; - - div = ((pll >> AR724X_PLL_REF_DIV_SHIFT) & AR724X_PLL_REF_DIV_MASK); - freq *= div; - - ar71xx_cpu_freq = freq; - - div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1; - ar71xx_ddr_freq = freq / div; - - div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2; - ar71xx_ahb_freq = ar71xx_cpu_freq / div; -} - -static void __init ar933x_detect_sys_frequency(void) -{ - u32 clock_ctrl; - u32 cpu_config; - u32 freq; - u32 t; - - t = ar71xx_reset_rr(AR933X_RESET_REG_BOOTSTRAP); - if (t & AR933X_BOOTSTRAP_REF_CLK_40) - ar71xx_ref_freq = (40 * 1000 * 1000); - else - ar71xx_ref_freq = (25 * 1000 * 1000); - - clock_ctrl = ar71xx_pll_rr(AR933X_PLL_CLOCK_CTRL_REG); - if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) { - ar71xx_cpu_freq = ar71xx_ref_freq; - ar71xx_ahb_freq = ar71xx_ref_freq; - ar71xx_ddr_freq = ar71xx_ref_freq; - } else { - cpu_config = ar71xx_pll_rr(AR933X_PLL_CPU_CONFIG_REG); - - t = (cpu_config >> AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT) & - AR933X_PLL_CPU_CONFIG_REFDIV_MASK; - freq = ar71xx_ref_freq / t; - - t = (cpu_config >> AR933X_PLL_CPU_CONFIG_NINT_SHIFT) & - AR933X_PLL_CPU_CONFIG_NINT_MASK; - freq *= t; - - t = (cpu_config >> AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & - AR933X_PLL_CPU_CONFIG_OUTDIV_MASK; - if (t == 0) - t = 1; - - freq >>= t; - - t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT) & - AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK) + 1; - ar71xx_cpu_freq = freq / t; - - t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT) & - AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK) + 1; - ar71xx_ddr_freq = freq / t; - - t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT) & - AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1; - ar71xx_ahb_freq = freq / t; - } -} - -static void __init detect_sys_frequency(void) -{ - switch (ar71xx_soc) { - case AR71XX_SOC_AR7130: - case AR71XX_SOC_AR7141: - case AR71XX_SOC_AR7161: - ar71xx_detect_sys_frequency(); - break; - - case AR71XX_SOC_AR7240: - case AR71XX_SOC_AR7241: - case AR71XX_SOC_AR7242: - ar724x_detect_sys_frequency(); - break; - - case AR71XX_SOC_AR9130: - case AR71XX_SOC_AR9132: - ar91xx_detect_sys_frequency(); - break; - - case AR71XX_SOC_AR9330: - case AR71XX_SOC_AR9331: - ar933x_detect_sys_frequency(); - break; - - case AR71XX_SOC_AR9341: - case AR71XX_SOC_AR9342: - case AR71XX_SOC_AR9344: - ar934x_detect_sys_frequency(); - break; - default: - BUG(); - } -} - -const char *get_system_type(void) -{ - return ar71xx_sys_type; -} - -unsigned int __cpuinit get_c0_compare_irq(void) -{ - return CP0_LEGACY_COMPARE_IRQ; -} - -void __init plat_mem_setup(void) -{ - set_io_port_base(KSEG1); - - ar71xx_ddr_base = ioremap_nocache(AR71XX_DDR_CTRL_BASE, - AR71XX_DDR_CTRL_SIZE); - - ar71xx_pll_base = ioremap_nocache(AR71XX_PLL_BASE, - AR71XX_PLL_SIZE); - - ar71xx_reset_base = ioremap_nocache(AR71XX_RESET_BASE, - AR71XX_RESET_SIZE); - - ar71xx_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE); - - ar71xx_usb_ctrl_base = ioremap_nocache(AR71XX_USB_CTRL_BASE, - AR71XX_USB_CTRL_SIZE); - - ar71xx_detect_mem_size(); - ar71xx_detect_sys_type(); - detect_sys_frequency(); - - pr_info("Clocks: CPU:%u.%03uMHz, DDR:%u.%03uMHz, AHB:%u.%03uMHz, " - "Ref:%u.%03uMHz", - ar71xx_cpu_freq / 1000000, (ar71xx_cpu_freq / 1000) % 1000, - ar71xx_ddr_freq / 1000000, (ar71xx_ddr_freq / 1000) % 1000, - ar71xx_ahb_freq / 1000000, (ar71xx_ahb_freq / 1000) % 1000, - ar71xx_ref_freq / 1000000, (ar71xx_ref_freq / 1000) % 1000); - - _machine_restart = ar71xx_restart; - _machine_halt = ar71xx_halt; - pm_power_off = ar71xx_halt; -} - -void __init plat_time_init(void) -{ - mips_hpt_frequency = ar71xx_cpu_freq / 2; -} - -__setup("board=", mips_machtype_setup); - -static int __init ar71xx_machine_setup(void) -{ - ar71xx_gpio_init(); - - ar71xx_add_device_uart(); - ar71xx_add_device_wdt(); - - mips_machine_setup(); - return 0; -} - -arch_initcall(ar71xx_machine_setup); - -static void __init ar71xx_generic_init(void) -{ - /* Nothing to do */ -} - -MIPS_MACHINE(AR71XX_MACH_GENERIC, "Generic", "Generic AR71xx board", - ar71xx_generic_init); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar71xx.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar71xx.h deleted file mode 100644 index c391fee4a4..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar71xx.h +++ /dev/null @@ -1,933 +0,0 @@ -/* - * Atheros AR71xx SoC specific definitions - * - * Copyright (C) 2010-2011 Jaiganesh Narayanan - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Parts of this file are based on Atheros 2.6.15 BSP - * Parts of this file are based on Atheros 2.6.31 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_AR71XX_H -#define __ASM_MACH_AR71XX_H - -#include -#include -#include -#include - -#ifndef __ASSEMBLER__ - -#define AR71XX_PCI_MEM_BASE 0x10000000 -#define AR71XX_PCI_MEM_SIZE 0x08000000 -#define AR71XX_APB_BASE 0x18000000 -#define AR71XX_GE0_BASE 0x19000000 -#define AR71XX_GE0_SIZE 0x01000000 -#define AR71XX_GE1_BASE 0x1a000000 -#define AR71XX_GE1_SIZE 0x01000000 -#define AR71XX_EHCI_BASE 0x1b000000 -#define AR71XX_EHCI_SIZE 0x01000000 -#define AR71XX_OHCI_BASE 0x1c000000 -#define AR71XX_OHCI_SIZE 0x01000000 -#define AR7240_OHCI_BASE 0x1b000000 -#define AR7240_OHCI_SIZE 0x01000000 -#define AR71XX_SPI_BASE 0x1f000000 -#define AR71XX_SPI_SIZE 0x01000000 - -#define AR71XX_DDR_CTRL_BASE (AR71XX_APB_BASE + 0x00000000) -#define AR71XX_DDR_CTRL_SIZE 0x10000 -#define AR71XX_CPU_BASE (AR71XX_APB_BASE + 0x00010000) -#define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000) -#define AR71XX_UART_SIZE 0x10000 -#define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) -#define AR71XX_USB_CTRL_SIZE 0x10000 -#define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000) -#define AR71XX_GPIO_SIZE 0x10000 -#define AR71XX_PLL_BASE (AR71XX_APB_BASE + 0x00050000) -#define AR71XX_PLL_SIZE 0x10000 -#define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000) -#define AR71XX_RESET_SIZE 0x10000 -#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000) -#define AR71XX_MII_SIZE 0x10000 -#define AR71XX_SLIC_BASE (AR71XX_APB_BASE + 0x00090000) -#define AR71XX_SLIC_SIZE 0x10000 -#define AR71XX_DMA_BASE (AR71XX_APB_BASE + 0x000A0000) -#define AR71XX_DMA_SIZE 0x10000 -#define AR71XX_STEREO_BASE (AR71XX_APB_BASE + 0x000B0000) -#define AR71XX_STEREO_SIZE 0x10000 - -#define AR724X_PCI_CRP_BASE (AR71XX_APB_BASE + 0x000C0000) -#define AR724X_PCI_CRP_SIZE 0x100 - -#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000F0000) -#define AR724X_PCI_CTRL_SIZE 0x100 - -#define AR91XX_WMAC_BASE (AR71XX_APB_BASE + 0x000C0000) -#define AR91XX_WMAC_SIZE 0x30000 - -#define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000) -#define AR933X_UART_SIZE 0x14 -#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -#define AR933X_GMAC_SIZE 0x04 -#define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) -#define AR933X_WMAC_SIZE 0x20000 - -#define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) -#define AR934X_WMAC_SIZE 0x20000 -#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -#define AR934X_GMAC_SIZE 0x14 - -#define AR71XX_MEM_SIZE_MIN 0x0200000 -#define AR71XX_MEM_SIZE_MAX 0x10000000 - -#define AR71XX_CPU_IRQ_BASE 0 -#define AR71XX_MISC_IRQ_BASE 8 -#define AR71XX_MISC_IRQ_COUNT 32 -#define AR71XX_GPIO_IRQ_BASE 40 -#define AR71XX_GPIO_IRQ_COUNT 32 -#define AR71XX_PCI_IRQ_BASE 72 -#define AR71XX_PCI_IRQ_COUNT 6 -#define AR934X_IP2_IRQ_BASE 78 -#define AR934X_IP2_IRQ_COUNT 2 - -#define AR71XX_CPU_IRQ_IP2 (AR71XX_CPU_IRQ_BASE + 2) -#define AR71XX_CPU_IRQ_USB (AR71XX_CPU_IRQ_BASE + 3) -#define AR71XX_CPU_IRQ_GE0 (AR71XX_CPU_IRQ_BASE + 4) -#define AR71XX_CPU_IRQ_GE1 (AR71XX_CPU_IRQ_BASE + 5) -#define AR71XX_CPU_IRQ_MISC (AR71XX_CPU_IRQ_BASE + 6) -#define AR71XX_CPU_IRQ_TIMER (AR71XX_CPU_IRQ_BASE + 7) - -#define AR71XX_MISC_IRQ_TIMER (AR71XX_MISC_IRQ_BASE + 0) -#define AR71XX_MISC_IRQ_ERROR (AR71XX_MISC_IRQ_BASE + 1) -#define AR71XX_MISC_IRQ_GPIO (AR71XX_MISC_IRQ_BASE + 2) -#define AR71XX_MISC_IRQ_UART (AR71XX_MISC_IRQ_BASE + 3) -#define AR71XX_MISC_IRQ_WDOG (AR71XX_MISC_IRQ_BASE + 4) -#define AR71XX_MISC_IRQ_PERFC (AR71XX_MISC_IRQ_BASE + 5) -#define AR71XX_MISC_IRQ_OHCI (AR71XX_MISC_IRQ_BASE + 6) -#define AR71XX_MISC_IRQ_DMA (AR71XX_MISC_IRQ_BASE + 7) -#define AR71XX_MISC_IRQ_TIMER2 (AR71XX_MISC_IRQ_BASE + 8) -#define AR71XX_MISC_IRQ_TIMER3 (AR71XX_MISC_IRQ_BASE + 9) -#define AR71XX_MISC_IRQ_TIMER4 (AR71XX_MISC_IRQ_BASE + 10) -#define AR71XX_MISC_IRQ_DDR_PERF (AR71XX_MISC_IRQ_BASE + 11) -#define AR71XX_MISC_IRQ_ENET_LINK (AR71XX_MISC_IRQ_BASE + 12) - -#define AR71XX_GPIO_IRQ(_x) (AR71XX_GPIO_IRQ_BASE + (_x)) - -#define AR71XX_PCI_IRQ_DEV0 (AR71XX_PCI_IRQ_BASE + 0) -#define AR71XX_PCI_IRQ_DEV1 (AR71XX_PCI_IRQ_BASE + 1) -#define AR71XX_PCI_IRQ_DEV2 (AR71XX_PCI_IRQ_BASE + 2) -#define AR71XX_PCI_IRQ_CORE (AR71XX_PCI_IRQ_BASE + 4) - -#define AR934X_IP2_IRQ_WMAC (AR934X_IP2_IRQ_BASE + 0) -#define AR934X_IP2_IRQ_PCIE (AR934X_IP2_IRQ_BASE + 1) - -extern u32 ar71xx_ahb_freq; -extern u32 ar71xx_cpu_freq; -extern u32 ar71xx_ddr_freq; -extern u32 ar71xx_ref_freq; - -enum ar71xx_soc_type { - AR71XX_SOC_UNKNOWN, - AR71XX_SOC_AR7130, - AR71XX_SOC_AR7141, - AR71XX_SOC_AR7161, - AR71XX_SOC_AR7240, - AR71XX_SOC_AR7241, - AR71XX_SOC_AR7242, - AR71XX_SOC_AR9130, - AR71XX_SOC_AR9132, - AR71XX_SOC_AR9330, - AR71XX_SOC_AR9331, - AR71XX_SOC_AR9341, - AR71XX_SOC_AR9342, - AR71XX_SOC_AR9344, -}; -extern u32 ar71xx_soc_rev; - -extern enum ar71xx_soc_type ar71xx_soc; - -/* - * PLL block - */ -#define AR71XX_PLL_REG_CPU_CONFIG 0x00 -#define AR71XX_PLL_REG_SEC_CONFIG 0x04 -#define AR71XX_PLL_REG_ETH0_INT_CLOCK 0x10 -#define AR71XX_PLL_REG_ETH1_INT_CLOCK 0x14 - -#define AR71XX_PLL_DIV_SHIFT 3 -#define AR71XX_PLL_DIV_MASK 0x1f -#define AR71XX_CPU_DIV_SHIFT 16 -#define AR71XX_CPU_DIV_MASK 0x3 -#define AR71XX_DDR_DIV_SHIFT 18 -#define AR71XX_DDR_DIV_MASK 0x3 -#define AR71XX_AHB_DIV_SHIFT 20 -#define AR71XX_AHB_DIV_MASK 0x7 - -#define AR71XX_ETH0_PLL_SHIFT 17 -#define AR71XX_ETH1_PLL_SHIFT 19 - -#define AR724X_PLL_REG_CPU_CONFIG 0x00 -#define AR724X_PLL_REG_PCIE_CONFIG 0x18 - -#define AR724X_PLL_DIV_SHIFT 0 -#define AR724X_PLL_DIV_MASK 0x3ff -#define AR724X_PLL_REF_DIV_SHIFT 10 -#define AR724X_PLL_REF_DIV_MASK 0xf -#define AR724X_AHB_DIV_SHIFT 19 -#define AR724X_AHB_DIV_MASK 0x1 -#define AR724X_DDR_DIV_SHIFT 22 -#define AR724X_DDR_DIV_MASK 0x3 - -#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c - -#define AR91XX_PLL_REG_CPU_CONFIG 0x00 -#define AR91XX_PLL_REG_ETH_CONFIG 0x04 -#define AR91XX_PLL_REG_ETH0_INT_CLOCK 0x14 -#define AR91XX_PLL_REG_ETH1_INT_CLOCK 0x18 - -#define AR91XX_PLL_DIV_SHIFT 0 -#define AR91XX_PLL_DIV_MASK 0x3ff -#define AR91XX_DDR_DIV_SHIFT 22 -#define AR91XX_DDR_DIV_MASK 0x3 -#define AR91XX_AHB_DIV_SHIFT 19 -#define AR91XX_AHB_DIV_MASK 0x1 - -#define AR91XX_ETH0_PLL_SHIFT 20 -#define AR91XX_ETH1_PLL_SHIFT 22 - -#define AR933X_PLL_CPU_CONFIG_REG 0x00 -#define AR933X_PLL_CLOCK_CTRL_REG 0x08 - -#define AR933X_PLL_CPU_CONFIG_NINT_SHIFT 10 -#define AR933X_PLL_CPU_CONFIG_NINT_MASK 0x3f -#define AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT 16 -#define AR933X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f -#define AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT 23 -#define AR933X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7 - -#define AR933X_PLL_CLOCK_CTRL_BYPASS BIT(2) -#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT 5 -#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK 0x3 -#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT 10 -#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK 0x3 -#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT 15 -#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK 0x7 - -#define AR934X_PLL_REG_CPU_CONFIG 0x00 -#define AR934X_PLL_REG_DDR_CONFIG 0x04 -#define AR934X_PLL_REG_DDR_CTRL_CLOCK 0x8 - -#define AR934X_CPU_PLL_CFG_OUTDIV_MSB 21 -#define AR934X_CPU_PLL_CFG_OUTDIV_LSB 19 -#define AR934X_CPU_PLL_CFG_OUTDIV_MASK 0x00380000 - -#define AR934X_CPU_PLL_CFG_OUTDIV_GET(x) \ - (((x) & AR934X_CPU_PLL_CFG_OUTDIV_MASK) >> \ - AR934X_CPU_PLL_CFG_OUTDIV_LSB) - -#define AR934X_DDR_PLL_CFG_OUTDIV_MSB 25 -#define AR934X_DDR_PLL_CFG_OUTDIV_LSB 23 -#define AR934X_DDR_PLL_CFG_OUTDIV_MASK 0x03800000 - -#define AR934X_DDR_PLL_CFG_OUTDIV_GET(x) \ - (((x) & AR934X_DDR_PLL_CFG_OUTDIV_MASK) >> \ - AR934X_DDR_PLL_CFG_OUTDIV_LSB) - -#define AR934X_DDR_PLL_CFG_OUTDIV_SET(x) \ - (((x) << AR934X_DDR_PLL_CFG_OUTDIV_LSB) & \ - AR934X_DDR_PLL_CFG_OUTDIV_MASK) - -#define AR934X_CPU_PLL_CFG_REFDIV_MSB 16 -#define AR934X_CPU_PLL_CFG_REFDIV_LSB 12 -#define AR934X_CPU_PLL_CFG_REFDIV_MASK 0x0001f000 - -#define AR934X_CPU_PLL_CFG_REFDIV_GET(x) \ - (((x) & AR934X_CPU_PLL_CFG_REFDIV_MASK) >> \ - AR934X_CPU_PLL_CFG_REFDIV_LSB) - -#define AR934X_CPU_PLL_CFG_REFDIV_SET(x) \ - (((x) << AR934X_CPU_PLL_CFG_REFDIV_LSB) & \ - AR934X_CPU_PLL_CFG_REFDIV_MASK) - -#define AR934X_CPU_PLL_CFG_REFDIV_RESET 2 - -#define AR934X_CPU_PLL_CFG_NINT_MSB 11 -#define AR934X_CPU_PLL_CFG_NINT_LSB 6 -#define AR934X_CPU_PLL_CFG_NINT_MASK 0x00000fc0 - -#define AR934X_CPU_PLL_CFG_NINT_GET(x) \ - (((x) & AR934X_CPU_PLL_CFG_NINT_MASK) >> \ - AR934X_CPU_PLL_CFG_NINT_LSB) - -#define AR934X_CPU_PLL_CFG_NINT_SET(x) \ - (((x) << AR934X_CPU_PLL_CFG_NINT_LSB) & \ - AR934X_CPU_PLL_CFG_NINT_MASK) - -#define AR934X_CPU_PLL_CFG_NINT_RESET 20 - -#define AR934X_CPU_PLL_CFG_NFRAC_MSB 5 -#define AR934X_CPU_PLL_CFG_NFRAC_LSB 0 -#define AR934X_CPU_PLL_CFG_NFRAC_MASK 0x0000003f - -#define AR934X_CPU_PLL_CFG_NFRAC_GET(x) \ - (((x) & AR934X_CPU_PLL_CFG_NFRAC_MASK) >> \ - AR934X_CPU_PLL_CFG_NFRAC_LSB) - -#define AR934X_CPU_PLL_CFG_NFRAC_SET(x) \ - (((x) << AR934X_CPU_PLL_CFG_NFRAC_LSB) & \ - AR934X_CPU_PLL_CFG_NFRAC_MASK) - -#define AR934X_DDR_PLL_CFG_REFDIV_MSB 20 -#define AR934X_DDR_PLL_CFG_REFDIV_LSB 16 -#define AR934X_DDR_PLL_CFG_REFDIV_MASK 0x001f0000 - -#define AR934X_DDR_PLL_CFG_REFDIV_GET(x) \ - (((x) & AR934X_DDR_PLL_CFG_REFDIV_MASK) >> \ - AR934X_DDR_PLL_CFG_REFDIV_LSB) - -#define AR934X_DDR_PLL_CFG_REFDIV_SET(x) \ - (((x) << AR934X_DDR_PLL_CFG_REFDIV_LSB) & \ - AR934X_DDR_PLL_CFG_REFDIV_MASK) - -#define AR934X_DDR_PLL_CFG_REFDIV_RESET 2 - -#define AR934X_DDR_PLL_CFG_NINT_MSB 15 -#define AR934X_DDR_PLL_CFG_NINT_LSB 10 -#define AR934X_DDR_PLL_CFG_NINT_MASK 0x0000fc00 - -#define AR934X_DDR_PLL_CFG_NINT_GET(x) \ - (((x) & AR934X_DDR_PLL_CFG_NINT_MASK) >> \ - AR934X_DDR_PLL_CFG_NINT_LSB) - -#define AR934X_DDR_PLL_CFG_NINT_SET(x) \ - (((x) << AR934X_DDR_PLL_CFG_NINT_LSB) & \ - AR934X_DDR_PLL_CFG_NINT_MASK) - -#define AR934X_DDR_PLL_CFG_NINT_RESET 20 - -#define AR934X_DDR_PLL_CFG_NFRAC_MSB 9 -#define AR934X_DDR_PLL_CFG_NFRAC_LSB 0 -#define AR934X_DDR_PLL_CFG_NFRAC_MASK 0x000003ff - -#define AR934X_DDR_PLL_CFG_NFRAC_GET(x) \ - (((x) & AR934X_DDR_PLL_CFG_NFRAC_MASK) >> \ - AR934X_DDR_PLL_CFG_NFRAC_LSB) - -#define AR934X_DDR_PLL_CFG_NFRAC_SET(x) \ - (((x) << AR934X_DDR_PLL_CFG_NFRAC_LSB) & \ - AR934X_DDR_PLL_CFG_NFRAC_MASK) - -#define AR934X_DDR_PLL_CFG_NFRAC_RESET 512 - -#define AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MSB 19 -#define AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_LSB 15 -#define AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK 0x000f8000 - -#define AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_GET(x) \ - (((x) & AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK) >> \ - AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_LSB) - -#define AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SET(x) \ - (((x) << AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_LSB) & \ - AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK) - -#define AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_RESET 0 - -#define AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MSB 14 -#define AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_LSB 10 -#define AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK 0x00007c00 - -#define AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_GET(x) \ - (((x) & AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK) >> \ - AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_LSB) - -#define AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SET(x) \ - (((x) << AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_LSB) & \ - AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK) - -#define AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_RESET 0 - -#define AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MSB 9 -#define AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_LSB 5 -#define AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK 0x000003e0 - -#define AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_GET(x) \ - (((x) & AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK) >> \ - AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_LSB) - -#define AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SET(x) \ - (((x) << AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_LSB) & \ - AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK) - -#define AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_RESET 0 - -#define AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_MSB 24 -#define AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_LSB 24 -#define AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_MASK 0x01000000 - -#define AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_GET(x) \ - (((x) & AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_MASK) >> \ - AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_LSB) - -#define AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_SET(x) \ - (((x) << AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_LSB) & \ - AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_MASK) - -#define AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_RESET 1 - -#define AR934X_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS BIT(2) -#define AR934X_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS BIT(3) -#define AR934X_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS BIT(4) -#define AR934X_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20) -#define AR934X_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) -#define AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) - -extern void __iomem *ar71xx_pll_base; - -static inline void ar71xx_pll_wr(unsigned reg, u32 val) -{ - __raw_writel(val, ar71xx_pll_base + reg); -} - -static inline u32 ar71xx_pll_rr(unsigned reg) -{ - return __raw_readl(ar71xx_pll_base + reg); -} - -/* - * USB_CONFIG block - */ -#define USB_CTRL_REG_FLADJ 0x00 -#define USB_CTRL_REG_CONFIG 0x04 - -extern void __iomem *ar71xx_usb_ctrl_base; - -static inline void ar71xx_usb_ctrl_wr(unsigned reg, u32 val) -{ - __raw_writel(val, ar71xx_usb_ctrl_base + reg); -} - -static inline u32 ar71xx_usb_ctrl_rr(unsigned reg) -{ - return __raw_readl(ar71xx_usb_ctrl_base + reg); -} - -/* - * GPIO block - */ -#define AR71XX_GPIO_REG_OE 0x00 -#define AR71XX_GPIO_REG_IN 0x04 -#define AR71XX_GPIO_REG_OUT 0x08 -#define AR71XX_GPIO_REG_SET 0x0c -#define AR71XX_GPIO_REG_CLEAR 0x10 -#define AR71XX_GPIO_REG_INT_MODE 0x14 -#define AR71XX_GPIO_REG_INT_TYPE 0x18 -#define AR71XX_GPIO_REG_INT_POLARITY 0x1c -#define AR71XX_GPIO_REG_INT_PENDING 0x20 -#define AR71XX_GPIO_REG_INT_ENABLE 0x24 -#define AR71XX_GPIO_REG_FUNC 0x28 - -#define AR934X_GPIO_REG_OUT_FUNC0 0x2c -#define AR934X_GPIO_REG_OUT_FUNC1 0x30 -#define AR934X_GPIO_REG_OUT_FUNC2 0x34 -#define AR934X_GPIO_REG_OUT_FUNC3 0x38 -#define AR934X_GPIO_REG_OUT_FUNC4 0x3c -#define AR934X_GPIO_REG_OUT_FUNC5 0x40 -#define AR934X_GPIO_REG_FUNC 0x6c - -#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17) -#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16) -#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13) -#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12) -#define AR71XX_GPIO_FUNC_UART_EN BIT(8) -#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4) -#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0) - -#define AR71XX_GPIO_COUNT 16 - -#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19) -#define AR724X_GPIO_FUNC_SPI_EN BIT(18) -#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14) -#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13) -#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12) -#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11) -#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10) -#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9) -#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8) -#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) -#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) -#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) -#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) -#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) -#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) -#define AR724X_GPIO_FUNC_UART_EN BIT(1) -#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0) - -#define AR7240_GPIO_COUNT 18 -#define AR7241_GPIO_COUNT 20 - -#define AR91XX_GPIO_FUNC_WMAC_LED_EN BIT(22) -#define AR91XX_GPIO_FUNC_EXP_PORT_CS_EN BIT(21) -#define AR91XX_GPIO_FUNC_I2S_REFCLKEN BIT(20) -#define AR91XX_GPIO_FUNC_I2S_MCKEN BIT(19) -#define AR91XX_GPIO_FUNC_I2S1_EN BIT(18) -#define AR91XX_GPIO_FUNC_I2S0_EN BIT(17) -#define AR91XX_GPIO_FUNC_SLIC_EN BIT(16) -#define AR91XX_GPIO_FUNC_UART_RTSCTS_EN BIT(9) -#define AR91XX_GPIO_FUNC_UART_EN BIT(8) -#define AR91XX_GPIO_FUNC_USB_CLK_EN BIT(4) - -#define AR91XX_GPIO_COUNT 22 - -#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31) -#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30) -#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29) -#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27) -#define AR933X_GPIO_FUNC_I2SO_EN BIT(26) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23) -#define AR933X_GPIO_FUNC_SPI_EN BIT(18) -#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14) -#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) -#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) -#define AR933X_GPIO_FUNC_UART_EN BIT(1) -#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0) - -#define AR933X_GPIO_COUNT 30 - -#define AR934X_GPIO_FUNC_SPI_CS_1_EN BIT(14) -#define AR934X_GPIO_FUNC_SPI_CS_0_EN BIT(13) - -#define AR934X_GPIO_COUNT 23 -#define AR934X_GPIO_FUNC_DDR_DQOE_EN BIT(17) - -#define AR934X_GPIO_OUT_GPIO 0x00 - -extern void __iomem *ar71xx_gpio_base; - -static inline void ar71xx_gpio_wr(unsigned reg, u32 value) -{ - __raw_writel(value, ar71xx_gpio_base + reg); -} - -static inline u32 ar71xx_gpio_rr(unsigned reg) -{ - return __raw_readl(ar71xx_gpio_base + reg); -} - -void ar71xx_gpio_init(void) __init; -void ar71xx_gpio_function_enable(u32 mask); -void ar71xx_gpio_function_disable(u32 mask); -void ar71xx_gpio_function_setup(u32 set, u32 clear); -void ar71xx_gpio_output_select(unsigned gpio, u8 val); - -/* - * DDR_CTRL block - */ -#define AR71XX_DDR_REG_PCI_WIN0 0x7c -#define AR71XX_DDR_REG_PCI_WIN1 0x80 -#define AR71XX_DDR_REG_PCI_WIN2 0x84 -#define AR71XX_DDR_REG_PCI_WIN3 0x88 -#define AR71XX_DDR_REG_PCI_WIN4 0x8c -#define AR71XX_DDR_REG_PCI_WIN5 0x90 -#define AR71XX_DDR_REG_PCI_WIN6 0x94 -#define AR71XX_DDR_REG_PCI_WIN7 0x98 -#define AR71XX_DDR_REG_FLUSH_GE0 0x9c -#define AR71XX_DDR_REG_FLUSH_GE1 0xa0 -#define AR71XX_DDR_REG_FLUSH_USB 0xa4 -#define AR71XX_DDR_REG_FLUSH_PCI 0xa8 - -#define AR724X_DDR_REG_FLUSH_GE0 0x7c -#define AR724X_DDR_REG_FLUSH_GE1 0x80 -#define AR724X_DDR_REG_FLUSH_USB 0x84 -#define AR724X_DDR_REG_FLUSH_PCIE 0x88 - -#define AR91XX_DDR_REG_FLUSH_GE0 0x7c -#define AR91XX_DDR_REG_FLUSH_GE1 0x80 -#define AR91XX_DDR_REG_FLUSH_USB 0x84 -#define AR91XX_DDR_REG_FLUSH_WMAC 0x88 - -#define AR933X_DDR_REG_FLUSH_GE0 0x7c -#define AR933X_DDR_REG_FLUSH_GE1 0x80 -#define AR933X_DDR_REG_FLUSH_USB 0x84 -#define AR933X_DDR_REG_FLUSH_WMAC 0x88 - -#define AR934X_DDR_REG_FLUSH_GE0 0x9c -#define AR934X_DDR_REG_FLUSH_GE1 0xa0 -#define AR934X_DDR_REG_FLUSH_USB 0xa4 -#define AR934X_DDR_REG_FLUSH_PCIE 0xa8 -#define AR934X_DDR_REG_FLUSH_WMAC 0xac - - -#define PCI_WIN0_OFFS 0x10000000 -#define PCI_WIN1_OFFS 0x11000000 -#define PCI_WIN2_OFFS 0x12000000 -#define PCI_WIN3_OFFS 0x13000000 -#define PCI_WIN4_OFFS 0x14000000 -#define PCI_WIN5_OFFS 0x15000000 -#define PCI_WIN6_OFFS 0x16000000 -#define PCI_WIN7_OFFS 0x07000000 - -extern void __iomem *ar71xx_ddr_base; - -static inline void ar71xx_ddr_wr(unsigned reg, u32 val) -{ - __raw_writel(val, ar71xx_ddr_base + reg); -} - -static inline u32 ar71xx_ddr_rr(unsigned reg) -{ - return __raw_readl(ar71xx_ddr_base + reg); -} - -void ar71xx_ddr_flush(u32 reg); - -/* - * PCI block - */ -#define AR71XX_PCI_CFG_BASE (AR71XX_PCI_MEM_BASE + PCI_WIN7_OFFS + 0x10000) -#define AR71XX_PCI_CFG_SIZE 0x100 - -#define PCI_REG_CRP_AD_CBE 0x00 -#define PCI_REG_CRP_WRDATA 0x04 -#define PCI_REG_CRP_RDDATA 0x08 -#define PCI_REG_CFG_AD 0x0c -#define PCI_REG_CFG_CBE 0x10 -#define PCI_REG_CFG_WRDATA 0x14 -#define PCI_REG_CFG_RDDATA 0x18 -#define PCI_REG_PCI_ERR 0x1c -#define PCI_REG_PCI_ERR_ADDR 0x20 -#define PCI_REG_AHB_ERR 0x24 -#define PCI_REG_AHB_ERR_ADDR 0x28 - -#define PCI_CRP_CMD_WRITE 0x00010000 -#define PCI_CRP_CMD_READ 0x00000000 -#define PCI_CFG_CMD_READ 0x0000000a -#define PCI_CFG_CMD_WRITE 0x0000000b - -#define PCI_IDSEL_ADL_START 17 - -#define AR724X_PCI_CFG_BASE (AR71XX_PCI_MEM_BASE + 0x4000000) -#define AR724X_PCI_CFG_SIZE 0x1000 - -#define AR724X_PCI_REG_APP 0x00 -#define AR724X_PCI_REG_RESET 0x18 -#define AR724X_PCI_REG_INT_STATUS 0x4c -#define AR724X_PCI_REG_INT_MASK 0x50 - -#define AR724X_PCI_APP_LTSSM_ENABLE BIT(0) -#define AR724X_PCI_RESET_LINK_UP BIT(0) - -#define AR724X_PCI_INT_DEV0 BIT(14) - -/* - * RESET block - */ -#define AR71XX_RESET_REG_TIMER 0x00 -#define AR71XX_RESET_REG_TIMER_RELOAD 0x04 -#define AR71XX_RESET_REG_WDOG_CTRL 0x08 -#define AR71XX_RESET_REG_WDOG 0x0c -#define AR71XX_RESET_REG_MISC_INT_STATUS 0x10 -#define AR71XX_RESET_REG_MISC_INT_ENABLE 0x14 -#define AR71XX_RESET_REG_PCI_INT_STATUS 0x18 -#define AR71XX_RESET_REG_PCI_INT_ENABLE 0x1c -#define AR71XX_RESET_REG_GLOBAL_INT_STATUS 0x20 -#define AR71XX_RESET_REG_RESET_MODULE 0x24 -#define AR71XX_RESET_REG_PERFC_CTRL 0x2c -#define AR71XX_RESET_REG_PERFC0 0x30 -#define AR71XX_RESET_REG_PERFC1 0x34 -#define AR71XX_RESET_REG_REV_ID 0x90 - -#define AR91XX_RESET_REG_GLOBAL_INT_STATUS 0x18 -#define AR91XX_RESET_REG_RESET_MODULE 0x1c -#define AR91XX_RESET_REG_PERF_CTRL 0x20 -#define AR91XX_RESET_REG_PERFC0 0x24 -#define AR91XX_RESET_REG_PERFC1 0x28 - -#define AR724X_RESET_REG_RESET_MODULE 0x1c - -#define AR933X_RESET_REG_RESET_MODULE 0x1c -#define AR933X_RESET_REG_BOOTSTRAP 0xac -#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18) -#define AR933X_BOOTSTRAP_EEPBUSY BIT(4) -#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) - -#define AR934X_RESET_REG_RESET_MODULE 0x1c - -#define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac -#define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0) -#define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1) -#define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2) -#define AR934X_PCIE_WMAC_INT_WMAC_RXHP BIT(3) -#define AR934X_PCIE_WMAC_INT_PCIE_RC BIT(4) -#define AR934X_PCIE_WMAC_INT_PCIE_RC0 BIT(5) -#define AR934X_PCIE_WMAC_INT_PCIE_RC1 BIT(6) -#define AR934X_PCIE_WMAC_INT_PCIE_RC2 BIT(7) -#define AR934X_PCIE_WMAC_INT_PCIE_RC3 BIT(8) -#define AR934X_PCIE_WMAC_INT_WMAC_ALL \ - (AR934X_PCIE_WMAC_INT_WMAC_MISC | AR934X_PCIE_WMAC_INT_WMAC_TX | \ - AR934X_PCIE_WMAC_INT_WMAC_RXLP | AR934X_PCIE_WMAC_INT_WMAC_RXHP) - -#define AR934X_PCIE_WMAC_INT_PCIE_ALL \ - (AR934X_PCIE_WMAC_INT_PCIE_RC | AR934X_PCIE_WMAC_INT_PCIE_RC0 | \ - AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \ - AR934X_PCIE_WMAC_INT_PCIE_RC3) - -#define AR934X_RESET_REG_BOOTSTRAP 0xb0 -#define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23) -#define AR934X_BOOTSTRAP_SW_OPTION7 BIT(22) -#define AR934X_BOOTSTRAP_SW_OPTION6 BIT(21) -#define AR934X_BOOTSTRAP_SW_OPTION5 BIT(20) -#define AR934X_BOOTSTRAP_SW_OPTION4 BIT(19) -#define AR934X_BOOTSTRAP_SW_OPTION3 BIT(18) -#define AR934X_BOOTSTRAP_SW_OPTION2 BIT(17) -#define AR934X_BOOTSTRAP_SW_OPTION1 BIT(16) -#define AR934X_BOOTSTRAP_USB_MODE_DEVICE BIT(7) -#define AR934X_BOOTSTRAP_PCIE_RC BIT(6) -#define AR934X_BOOTSTRAP_EJTAG_MODE BIT(5) -#define AR934X_BOOTSTRAP_REF_CLK_40 BIT(4) -#define AR934X_BOOTSTRAP_BOOT_FROM_SPI BIT(2) -#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1) -#define AR934X_BOOTSTRAP_DDR1 BIT(0) - -#define WDOG_CTRL_LAST_RESET BIT(31) -#define WDOG_CTRL_ACTION_MASK 3 -#define WDOG_CTRL_ACTION_NONE 0 /* no action */ -#define WDOG_CTRL_ACTION_GPI 1 /* general purpose interrupt */ -#define WDOG_CTRL_ACTION_NMI 2 /* NMI */ -#define WDOG_CTRL_ACTION_FCR 3 /* full chip reset */ - -#define MISC_INT_ENET_LINK BIT(12) -#define MISC_INT_DDR_PERF BIT(11) -#define MISC_INT_TIMER4 BIT(10) -#define MISC_INT_TIMER3 BIT(9) -#define MISC_INT_TIMER2 BIT(8) -#define MISC_INT_DMA BIT(7) -#define MISC_INT_OHCI BIT(6) -#define MISC_INT_PERFC BIT(5) -#define MISC_INT_WDOG BIT(4) -#define MISC_INT_UART BIT(3) -#define MISC_INT_GPIO BIT(2) -#define MISC_INT_ERROR BIT(1) -#define MISC_INT_TIMER BIT(0) - -#define PCI_INT_CORE BIT(4) -#define PCI_INT_DEV2 BIT(2) -#define PCI_INT_DEV1 BIT(1) -#define PCI_INT_DEV0 BIT(0) - -#define RESET_MODULE_EXTERNAL BIT(28) -#define RESET_MODULE_FULL_CHIP BIT(24) -#define RESET_MODULE_AMBA2WMAC BIT(22) -#define RESET_MODULE_CPU_NMI BIT(21) -#define RESET_MODULE_CPU_COLD BIT(20) -#define RESET_MODULE_DMA BIT(19) -#define RESET_MODULE_SLIC BIT(18) -#define RESET_MODULE_STEREO BIT(17) -#define RESET_MODULE_DDR BIT(16) -#define RESET_MODULE_GE1_MAC BIT(13) -#define RESET_MODULE_GE1_PHY BIT(12) -#define RESET_MODULE_USBSUS_OVERRIDE BIT(10) -#define RESET_MODULE_GE0_MAC BIT(9) -#define RESET_MODULE_GE0_PHY BIT(8) -#define RESET_MODULE_USB_OHCI_DLL BIT(6) -#define RESET_MODULE_USB_HOST BIT(5) -#define RESET_MODULE_USB_PHY BIT(4) -#define RESET_MODULE_USB_OHCI_DLL_7240 BIT(3) -#define RESET_MODULE_PCI_BUS BIT(1) -#define RESET_MODULE_PCI_CORE BIT(0) - -#define AR724X_RESET_GE1_MDIO BIT(23) -#define AR724X_RESET_GE0_MDIO BIT(22) -#define AR724X_RESET_PCIE_PHY_SERIAL BIT(10) -#define AR724X_RESET_PCIE_PHY BIT(7) -#define AR724X_RESET_PCIE BIT(6) -#define AR724X_RESET_USB_HOST BIT(5) -#define AR724X_RESET_USB_PHY BIT(4) -#define AR724X_RESET_USBSUS_OVERRIDE BIT(3) - -#define AR933X_RESET_WMAC BIT(11) -#define AR933X_RESET_GE1_MDIO BIT(23) -#define AR933X_RESET_GE0_MDIO BIT(22) -#define AR933X_RESET_GE1_MAC BIT(13) -#define AR933X_RESET_GE0_MAC BIT(9) -#define AR933X_RESET_USB_HOST BIT(5) -#define AR933X_RESET_USB_PHY BIT(4) -#define AR933X_RESET_USBSUS_OVERRIDE BIT(3) - -#define AR934X_RESET_HOST BIT(31) -#define AR934X_RESET_SLIC BIT(30) -#define AR934X_RESET_HDMA BIT(29) -#define AR934X_RESET_EXTERNAL BIT(28) -#define AR934X_RESET_RTC BIT(27) -#define AR934X_RESET_PCIE_EP_INT BIT(26) -#define AR934X_RESET_CHKSUM_ACC BIT(25) -#define AR934X_RESET_FULL_CHIP BIT(24) -#define AR934X_RESET_GE1_MDIO BIT(23) -#define AR934X_RESET_GE0_MDIO BIT(22) -#define AR934X_RESET_CPU_NMI BIT(21) -#define AR934X_RESET_CPU_COLD BIT(20) -#define AR934X_RESET_HOST_RESET_INT BIT(19) -#define AR934X_RESET_PCIE_EP BIT(18) -#define AR934X_RESET_UART1 BIT(17) -#define AR934X_RESET_DDR BIT(16) -#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) -#define AR934X_RESET_NANDF BIT(14) -#define AR934X_RESET_GE1_MAC BIT(13) -#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12) -#define AR934X_RESET_USB_PHY_ANALOG BIT(11) -#define AR934X_RESET_HOST_DMA_INT BIT(10) -#define AR934X_RESET_GE0_MAC BIT(9) -#define AR934X_RESET_ETH_SIWTCH BIT(8) -#define AR934X_RESET_PCIE_PHY BIT(7) -#define AR934X_RESET_PCIE BIT(6) -#define AR934X_RESET_USB_HOST BIT(5) -#define AR934X_RESET_USB_PHY BIT(4) -#define AR934X_RESET_USBSUS_OVERRIDE BIT(3) -#define AR934X_RESET_LUT BIT(2) -#define AR934X_RESET_MBOX BIT(1) -#define AR934X_RESET_I2S BIT(0) - -#define REV_ID_MAJOR_MASK 0xfff0 -#define REV_ID_MAJOR_AR71XX 0x00a0 -#define REV_ID_MAJOR_AR913X 0x00b0 -#define REV_ID_MAJOR_AR7240 0x00c0 -#define REV_ID_MAJOR_AR7241 0x0100 -#define REV_ID_MAJOR_AR7242 0x1100 -#define REV_ID_MAJOR_AR9330 0x0110 -#define REV_ID_MAJOR_AR9331 0x1110 -#define REV_ID_MAJOR_AR9341 0x0120 -#define REV_ID_MAJOR_AR9342 0x1120 -#define REV_ID_MAJOR_AR9344 0x2120 - -#define AR71XX_REV_ID_MINOR_MASK 0x3 -#define AR71XX_REV_ID_MINOR_AR7130 0x0 -#define AR71XX_REV_ID_MINOR_AR7141 0x1 -#define AR71XX_REV_ID_MINOR_AR7161 0x2 -#define AR71XX_REV_ID_REVISION_MASK 0x3 -#define AR71XX_REV_ID_REVISION_SHIFT 2 - -#define AR91XX_REV_ID_MINOR_MASK 0x3 -#define AR91XX_REV_ID_MINOR_AR9130 0x0 -#define AR91XX_REV_ID_MINOR_AR9132 0x1 -#define AR91XX_REV_ID_REVISION_MASK 0x3 -#define AR91XX_REV_ID_REVISION_SHIFT 2 - -#define AR724X_REV_ID_REVISION_MASK 0x3 - -#define AR933X_REV_ID_REVISION_MASK 0xf - -#define AR934X_REV_ID_REVISION_MASK 0xf - -extern void __iomem *ar71xx_reset_base; - -static inline void ar71xx_reset_wr(unsigned reg, u32 val) -{ - __raw_writel(val, ar71xx_reset_base + reg); -} - -static inline u32 ar71xx_reset_rr(unsigned reg) -{ - return __raw_readl(ar71xx_reset_base + reg); -} - -void ar71xx_device_stop(u32 mask); -void ar71xx_device_start(u32 mask); -void ar71xx_device_reset_rmw(u32 clear, u32 set); -int ar71xx_device_stopped(u32 mask); - -/* - * SPI block - */ -#define SPI_REG_FS 0x00 /* Function Select */ -#define SPI_REG_CTRL 0x04 /* SPI Control */ -#define SPI_REG_IOC 0x08 /* SPI I/O Control */ -#define SPI_REG_RDS 0x0c /* Read Data Shift */ - -#define SPI_FS_GPIO BIT(0) /* Enable GPIO mode */ - -#define SPI_CTRL_RD BIT(6) /* Remap Disable */ -#define SPI_CTRL_DIV_MASK 0x3f - -#define SPI_IOC_DO BIT(0) /* Data Out pin */ -#define SPI_IOC_CLK BIT(8) /* CLK pin */ -#define SPI_IOC_CS(n) BIT(16 + (n)) -#define SPI_IOC_CS0 SPI_IOC_CS(0) -#define SPI_IOC_CS1 SPI_IOC_CS(1) -#define SPI_IOC_CS2 SPI_IOC_CS(2) -#define SPI_IOC_CS_ALL (SPI_IOC_CS0 | SPI_IOC_CS1 | SPI_IOC_CS2) - -void ar71xx_flash_acquire(void); -void ar71xx_flash_release(void); - -/* - * MII_CTRL block - */ -#define MII_REG_MII0_CTRL 0x00 -#define MII_REG_MII1_CTRL 0x04 - -#define MII_CTRL_IF_MASK 3 -#define MII_CTRL_SPEED_SHIFT 4 -#define MII_CTRL_SPEED_MASK 3 -#define MII_CTRL_SPEED_10 0 -#define MII_CTRL_SPEED_100 1 -#define MII_CTRL_SPEED_1000 2 - -#define MII0_CTRL_IF_GMII 0 -#define MII0_CTRL_IF_MII 1 -#define MII0_CTRL_IF_RGMII 2 -#define MII0_CTRL_IF_RMII 3 - -#define MII1_CTRL_IF_RGMII 0 -#define MII1_CTRL_IF_RMII 1 - -/* - * AR933X GMAC - */ -#define AR933X_GMAC_REG_ETH_CFG 0x00 - -#define AR933X_ETH_CFG_RGMII_GE0 BIT(0) -#define AR933X_ETH_CFG_MII_GE0 BIT(1) -#define AR933X_ETH_CFG_GMII_GE0 BIT(2) -#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3) -#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4) -#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5) -#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7) -#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8) -#define AR933X_ETH_CFG_RMII_GE0 BIT(9) -#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0 -#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10) - -/* - * AR934X GMAC Interface - */ -#define AR934X_GMAC_REG_ETH_CFG 0x00 - -#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0) -#define AR934X_ETH_CFG_MII_GMAC0 BIT(1) -#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2) -#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3) -#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4) -#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5) -#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6) -#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7) -#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9) -#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10) -#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11) -#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12) -#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13) - -#endif /* __ASSEMBLER__ */ - -#endif /* __ASM_MACH_AR71XX_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h deleted file mode 100644 index 05a93ecd99..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * AR91xx parallel flash driver platform data definitions - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __AR91XX_FLASH_H -#define __AR91XX_FLASH_H - -struct mtd_partition; - -struct ar91xx_flash_platform_data { - unsigned int width; - u8 is_shared:1; -#ifdef CONFIG_MTD_PARTITIONS - unsigned int nr_parts; - struct mtd_partition *parts; -#endif -}; - -#endif /* __AR91XX_FLASH_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart.h deleted file mode 100644 index 5273055593..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Atheros AR933X UART defines - * - * Copyright (C) 2011 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __AR933X_UART_H -#define __AR933X_UART_H - -#define AR933X_UART_REGS_SIZE 20 -#define AR933X_UART_FIFO_SIZE 16 - -#define AR933X_UART_DATA_REG 0x00 -#define AR933X_UART_CS_REG 0x04 -#define AR933X_UART_CLOCK_REG 0x08 -#define AR933X_UART_INT_REG 0x0c -#define AR933X_UART_INT_EN_REG 0x10 - -#define AR933X_UART_DATA_TX_RX_MASK 0xff -#define AR933X_UART_DATA_RX_CSR BIT(8) -#define AR933X_UART_DATA_TX_CSR BIT(9) - -#define AR933X_UART_CS_PARITY_S 0 -#define AR933X_UART_CS_PARITY_M 0x3 -#define AR933X_UART_CS_PARITY_NONE 0 -#define AR933X_UART_CS_PARITY_ODD 1 -#define AR933X_UART_CS_PARITY_EVEN 2 -#define AR933X_UART_CS_IF_MODE_S 2 -#define AR933X_UART_CS_IF_MODE_M 0x3 -#define AR933X_UART_CS_IF_MODE_NONE 0 -#define AR933X_UART_CS_IF_MODE_DTE 1 -#define AR933X_UART_CS_IF_MODE_DCE 2 -#define AR933X_UART_CS_FLOW_CTRL_S 4 -#define AR933X_UART_CS_FLOW_CTRL_M 0x3 -#define AR933X_UART_CS_DMA_EN BIT(6) -#define AR933X_UART_CS_TX_READY_ORIDE BIT(7) -#define AR933X_UART_CS_RX_READY_ORIDE BIT(8) -#define AR933X_UART_CS_TX_READY BIT(9) -#define AR933X_UART_CS_RX_BREAK BIT(10) -#define AR933X_UART_CS_TX_BREAK BIT(11) -#define AR933X_UART_CS_HOST_INT BIT(12) -#define AR933X_UART_CS_HOST_INT_EN BIT(13) -#define AR933X_UART_CS_TX_BUSY BIT(14) -#define AR933X_UART_CS_RX_BUSY BIT(15) - -#define AR933X_UART_CLOCK_STEP_M 0xffff -#define AR933X_UART_CLOCK_SCALE_M 0xfff -#define AR933X_UART_CLOCK_SCALE_S 16 -#define AR933X_UART_CLOCK_STEP_M 0xffff - -#define AR933X_UART_INT_RX_VALID BIT(0) -#define AR933X_UART_INT_TX_READY BIT(1) -#define AR933X_UART_INT_RX_FRAMING_ERR BIT(2) -#define AR933X_UART_INT_RX_OFLOW_ERR BIT(3) -#define AR933X_UART_INT_TX_OFLOW_ERR BIT(4) -#define AR933X_UART_INT_RX_PARITY_ERR BIT(5) -#define AR933X_UART_INT_RX_BREAK_ON BIT(6) -#define AR933X_UART_INT_RX_BREAK_OFF BIT(7) -#define AR933X_UART_INT_RX_FULL BIT(8) -#define AR933X_UART_INT_TX_EMPTY BIT(9) -#define AR933X_UART_INT_ALLINTS 0x3ff - -#endif /* __AR933X_UART_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart_platform.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart_platform.h deleted file mode 100644 index 6cb30f2b71..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart_platform.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Platform data definition for Atheros AR933X UART - * - * Copyright (C) 2011 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _AR933X_UART_PLATFORM_H -#define _AR933X_UART_PLATFORM_H - -struct ar933x_uart_platform_data { - unsigned uartclk; -}; - -#endif /* _AR933X_UART_PLATFORM_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h deleted file mode 100644 index d3560e59b5..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Atheros AR71xx specific CPU feature overrides - * - * Copyright (C) 2008 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This file was derived from: include/asm-mips/cpu-features.h - * Copyright (C) 2003, 2004 Ralf Baechle - * Copyright (C) 2004 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ -#ifndef __ASM_MACH_AR71XX_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_AR71XX_CPU_FEATURE_OVERRIDES_H - -#define cpu_has_tlb 1 -#define cpu_has_4kex 1 -#define cpu_has_3k_cache 0 -#define cpu_has_4k_cache 1 -#define cpu_has_tx39_cache 0 -#define cpu_has_sb1_cache 0 -#define cpu_has_fpu 0 -#define cpu_has_32fpr 0 -#define cpu_has_counter 1 -#define cpu_has_watch 1 -#define cpu_has_divec 1 - -#define cpu_has_prefetch 1 -#define cpu_has_ejtag 1 -#define cpu_has_llsc 1 - -#define cpu_has_mips16 1 -#define cpu_has_mdmx 0 -#define cpu_has_mips3d 0 -#define cpu_has_smartmips 0 - -#define cpu_has_mips32r1 1 -#define cpu_has_mips32r2 1 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#define cpu_has_dsp 0 -#define cpu_has_mipsmt 0 - -#define cpu_has_64bits 0 -#define cpu_has_64bit_zero_reg 0 -#define cpu_has_64bit_gp_regs 0 -#define cpu_has_64bit_addresses 0 - -#define cpu_dcache_line_size() 32 -#define cpu_icache_line_size() 32 - -#endif /* __ASM_MACH_AR71XX_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/gpio.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/gpio.h deleted file mode 100644 index 56fe902e26..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/gpio.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Atheros AR71xx GPIO API definitions - * - * Copyright (C) 2008 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef __ASM_MACH_AR71XX_GPIO_H -#define __ASM_MACH_AR71XX_GPIO_H - -#define ARCH_NR_GPIOS 64 -#include - -extern unsigned long ar71xx_gpio_count; -extern void __ar71xx_gpio_set_value(unsigned gpio, int value); -extern int __ar71xx_gpio_get_value(unsigned gpio); -int gpio_to_irq(unsigned gpio); -int irq_to_gpio(unsigned gpio); - -static inline int gpio_get_value(unsigned gpio) -{ - if (gpio < ar71xx_gpio_count) - return __ar71xx_gpio_get_value(gpio); - - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (gpio < ar71xx_gpio_count) - __ar71xx_gpio_set_value(gpio, value); - else - __gpio_set_value(gpio, value); -} - -#define gpio_cansleep __gpio_cansleep - -#endif /* __ASM_MACH_AR71XX_GPIO_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/irq.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/irq.h deleted file mode 100644 index c61d9c73fd..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/irq.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ -#ifndef __ASM_MACH_AR71XX_IRQ_H -#define __ASM_MACH_AR71XX_IRQ_H - -#define MIPS_CPU_IRQ_BASE 0 -#define NR_IRQS 80 - -#include_next - -#endif /* __ASM_MACH_AR71XX_IRQ_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h deleted file mode 100644 index 948d28034c..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Atheros AR71xx specific kernel entry setup - * - * Copyright (C) 2009 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ -#ifndef __ASM_MACH_AR71XX_KERNEL_ENTRY_H -#define __ASM_MACH_AR71XX_KERNEL_ENTRY_H - - /* - * Some bootloaders set the 'Kseg0 coherency algorithm' to - * 'Cacheable, noncoherent, write-through, no write allocate' - * and this cause performance issues. Let's go and change it to - * 'Cacheable, noncoherent, write-back, write allocate' - */ - .macro kernel_entry_setup - mfc0 t0, CP0_CONFIG - li t1, ~CONF_CM_CMASK - and t0, t1 - ori t0, CONF_CM_CACHABLE_NONCOHERENT - mtc0 t0, CP0_CONFIG - nop - .endm - - .macro smp_slave_setup - .endm - -#endif /* __ASM_MACH_AR71XX_KERNEL_ENTRY_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/mach-rb750.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/mach-rb750.h deleted file mode 100644 index 661ba4ec72..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/mach-rb750.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * MikroTik RouterBOARD 750 definitions - * - * Copyright (C) 2010 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ -#ifndef _MACH_RB750_H -#define _MACH_RB750_H - -#include - -#define RB750_GPIO_LVC573_LE 0 /* Latch enable on LVC573 */ -#define RB750_GPIO_NAND_IO0 1 /* NAND I/O 0 */ -#define RB750_GPIO_NAND_IO1 2 /* NAND I/O 1 */ -#define RB750_GPIO_NAND_IO2 3 /* NAND I/O 2 */ -#define RB750_GPIO_NAND_IO3 4 /* NAND I/O 3 */ -#define RB750_GPIO_NAND_IO4 5 /* NAND I/O 4 */ -#define RB750_GPIO_NAND_IO5 6 /* NAND I/O 5 */ -#define RB750_GPIO_NAND_IO6 7 /* NAND I/O 6 */ -#define RB750_GPIO_NAND_IO7 8 /* NAND I/O 7 */ -#define RB750_GPIO_NAND_NCE 11 /* NAND Chip Enable (active low) */ -#define RB750_GPIO_NAND_RDY 12 /* NAND Ready */ -#define RB750_GPIO_NAND_CLE 14 /* NAND Command Latch Enable */ -#define RB750_GPIO_NAND_ALE 15 /* NAND Address Latch Enable */ -#define RB750_GPIO_NAND_NRE 16 /* NAND Read Enable (active low) */ -#define RB750_GPIO_NAND_NWE 17 /* NAND Write Enable (active low) */ - -#define RB750_GPIO_BTN_RESET 1 -#define RB750_GPIO_SPI_CS0 2 -#define RB750_GPIO_LED_ACT 12 -#define RB750_GPIO_LED_PORT1 13 -#define RB750_GPIO_LED_PORT2 14 -#define RB750_GPIO_LED_PORT3 15 -#define RB750_GPIO_LED_PORT4 16 -#define RB750_GPIO_LED_PORT5 17 - -#define RB750_LED_ACT BIT(RB750_GPIO_LED_ACT) -#define RB750_LED_PORT1 BIT(RB750_GPIO_LED_PORT1) -#define RB750_LED_PORT2 BIT(RB750_GPIO_LED_PORT2) -#define RB750_LED_PORT3 BIT(RB750_GPIO_LED_PORT3) -#define RB750_LED_PORT4 BIT(RB750_GPIO_LED_PORT4) -#define RB750_LED_PORT5 BIT(RB750_GPIO_LED_PORT5) - -#define RB750_LVC573_LE BIT(RB750_GPIO_LVC573_LE) - -#define RB750_LED_BITS (RB750_LED_PORT1 | RB750_LED_PORT2 | RB750_LED_PORT3 | \ - RB750_LED_PORT4 | RB750_LED_PORT5 | RB750_LED_ACT) - -struct rb750_led_data { - char *name; - char *default_trigger; - u32 mask; - int active_low; -}; - -struct rb750_led_platform_data { - int num_leds; - struct rb750_led_data *leds; -}; - -int rb750_latch_change(u32 mask_clr, u32 mask_set); - -#endif /* _MACH_RB750_H */ \ No newline at end of file diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/mangle-port.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/mangle-port.h deleted file mode 100644 index ba41b38b96..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/mangle-port.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Copyright (C) 2008 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h - * Copyright (C) 2003, 2004 Ralf Baechle - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_AR71XX_MANGLE_PORT_H -#define __ASM_MACH_AR71XX_MANGLE_PORT_H - -#define __swizzle_addr_b(port) ((port) ^ 3) -#define __swizzle_addr_w(port) ((port) ^ 2) -#define __swizzle_addr_l(port) (port) -#define __swizzle_addr_q(port) (port) - -#if defined(CONFIG_SWAP_IO_SPACE) - -# define ioswabb(a, x) (x) -# define __mem_ioswabb(a, x) (x) -# define ioswabw(a, x) le16_to_cpu(x) -# define __mem_ioswabw(a, x) (x) -# define ioswabl(a, x) le32_to_cpu(x) -# define __mem_ioswabl(a, x) (x) -# define ioswabq(a, x) le64_to_cpu(x) -# define __mem_ioswabq(a, x) (x) - -#else - -# define ioswabb(a, x) (x) -# define __mem_ioswabb(a, x) (x) -# define ioswabw(a, x) (x) -# define __mem_ioswabw(a, x) cpu_to_le16(x) -# define ioswabl(a, x) (x) -# define __mem_ioswabl(a, x) cpu_to_le32(x) -# define ioswabq(a, x) (x) -# define __mem_ioswabq(a, x) cpu_to_le64(x) - -#endif - -#endif /* __ASM_MACH_AR71XX_MANGLE_PORT_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/pci.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/pci.h deleted file mode 100644 index 27043491ac..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/pci.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Atheros AR71xx SoC specific PCI definitions - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_AR71XX_PCI_H -#define __ASM_MACH_AR71XX_PCI_H - -struct pci_dev; - -struct ar71xx_pci_irq { - int irq; - u8 slot; - u8 pin; -}; - -#ifdef CONFIG_PCI -extern int (*ar71xx_pci_plat_dev_init)(struct pci_dev *dev); -extern unsigned ar71xx_pci_nr_irqs __initdata; -extern struct ar71xx_pci_irq *ar71xx_pci_irq_map __initdata; - -int ar71xx_pcibios_map_irq(const struct pci_dev *dev, - uint8_t slot, uint8_t pin) __init; -int ar71xx_pcibios_init(void) __init; - -int ar71xx_pci_be_handler(int is_fixup); - -int ar724x_pcibios_map_irq(const struct pci_dev *dev, - uint8_t slot, uint8_t pin) __init; -int ar724x_pcibios_init(int irq) __init; - -int ar71xx_pci_init(unsigned nr_irqs, struct ar71xx_pci_irq *map) __init; -#else -static inline int ar71xx_pci_init(unsigned nr_irqs, struct ar71xx_pci_irq *map) -{ - return 0; -} -#endif - -#endif /* __ASM_MACH_AR71XX_PCI_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/platform.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/platform.h deleted file mode 100644 index 206c4d7500..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/platform.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Atheros AR71xx SoC specific platform data definitions - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_AR71XX_PLATFORM_H -#define __ASM_MACH_AR71XX_PLATFORM_H - -#include -#include -#include -#include - -struct ag71xx_switch_platform_data { - u8 phy4_mii_en:1; -}; - -struct ag71xx_platform_data { - phy_interface_t phy_if_mode; - u32 phy_mask; - int speed; - int duplex; - u32 reset_bit; - u8 mac_addr[ETH_ALEN]; - struct device *mii_bus_dev; - - u8 has_gbit:1; - u8 is_ar91xx:1; - u8 is_ar7240:1; - u8 is_ar724x:1; - u8 has_ar8216:1; - - struct ag71xx_switch_platform_data *switch_data; - - void (*ddr_flush)(void); - void (*set_speed)(int speed); - - u32 fifo_cfg1; - u32 fifo_cfg2; - u32 fifo_cfg3; -}; - -struct ag71xx_mdio_platform_data { - u32 phy_mask; - int is_ar7240; -}; - -struct ar71xx_ehci_platform_data { - u8 is_ar91xx; -}; - -struct ar71xx_spi_platform_data { - unsigned bus_num; - unsigned num_chipselect; - u32 (*get_ioc_base)(u8 chip_select, int cs_high, int is_on); -}; - -#define AR71XX_SPI_CS_INACTIVE 0 -#define AR71XX_SPI_CS_ACTIVE 1 - -#endif /* __ASM_MACH_AR71XX_PLATFORM_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/rb4xx_cpld.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/rb4xx_cpld.h deleted file mode 100644 index 5b17e94b64..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/rb4xx_cpld.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * SPI driver definitions for the CPLD chip on the Mikrotik RB4xx boards - * - * Copyright (C) 2010 Gabor Juhos - * - * This file was based on the patches for Linux 2.6.27.39 published by - * MikroTik for their RouterBoard 4xx series devices. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#define CPLD_GPIO_nLED1 0 -#define CPLD_GPIO_nLED2 1 -#define CPLD_GPIO_nLED3 2 -#define CPLD_GPIO_nLED4 3 -#define CPLD_GPIO_FAN 4 -#define CPLD_GPIO_ALE 5 -#define CPLD_GPIO_CLE 6 -#define CPLD_GPIO_nCE 7 -#define CPLD_GPIO_nLED5 8 - -#define CPLD_NUM_GPIOS 9 - -#define CPLD_CFG_nLED1 BIT(CPLD_GPIO_nLED1) -#define CPLD_CFG_nLED2 BIT(CPLD_GPIO_nLED2) -#define CPLD_CFG_nLED3 BIT(CPLD_GPIO_nLED3) -#define CPLD_CFG_nLED4 BIT(CPLD_GPIO_nLED4) -#define CPLD_CFG_FAN BIT(CPLD_GPIO_FAN) -#define CPLD_CFG_ALE BIT(CPLD_GPIO_ALE) -#define CPLD_CFG_CLE BIT(CPLD_GPIO_CLE) -#define CPLD_CFG_nCE BIT(CPLD_GPIO_nCE) -#define CPLD_CFG_nLED5 BIT(CPLD_GPIO_nLED5) - -struct rb4xx_cpld_platform_data { - unsigned gpio_base; -}; - -extern int rb4xx_cpld_change_cfg(unsigned mask, unsigned value); -extern int rb4xx_cpld_read(unsigned char *rx_buf, - const unsigned char *verify_buf, - unsigned cnt); -extern int rb4xx_cpld_read_from(unsigned addr, - unsigned char *rx_buf, - const unsigned char *verify_buf, - unsigned cnt); -extern int rb4xx_cpld_write(const unsigned char *buf, unsigned count); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/war.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/war.h deleted file mode 100644 index 1ca6ffdc6a..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MACH_AR71XX_WAR_H -#define __ASM_MACH_AR71XX_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MACH_AR71XX_WAR_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/pci/pci-ar71xx.c b/target/linux/ar71xx/files-2.6.39/arch/mips/pci/pci-ar71xx.c deleted file mode 100644 index fd6b37900f..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/pci/pci-ar71xx.c +++ /dev/null @@ -1,415 +0,0 @@ -/* - * Atheros AR71xx PCI host controller driver - * - * Copyright (C) 2008-2010 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Parts of this file are based on Atheros' 2.6.15 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#undef DEBUG -#ifdef DEBUG -#define DBG(fmt, args...) printk(KERN_DEBUG fmt, ## args) -#else -#define DBG(fmt, args...) -#endif - -#define AR71XX_PCI_DELAY 100 /* msecs */ - -#if 0 -#define PCI_IDSEL_BASE PCI_IDSEL_ADL_START -#else -#define PCI_IDSEL_BASE 0 -#endif - -static void __iomem *ar71xx_pcicfg_base; -static DEFINE_SPINLOCK(ar71xx_pci_lock); -static int ar71xx_pci_fixup_enable; - -static inline void ar71xx_pci_delay(void) -{ - mdelay(AR71XX_PCI_DELAY); -} - -/* Byte lane enable bits */ -static u8 ble_table[4][4] = { - {0x0, 0xf, 0xf, 0xf}, - {0xe, 0xd, 0xb, 0x7}, - {0xc, 0xf, 0x3, 0xf}, - {0xf, 0xf, 0xf, 0xf}, -}; - -static inline u32 ar71xx_pci_get_ble(int where, int size, int local) -{ - u32 t; - - t = ble_table[size & 3][where & 3]; - BUG_ON(t == 0xf); - t <<= (local) ? 20 : 4; - return t; -} - -static inline u32 ar71xx_pci_bus_addr(struct pci_bus *bus, unsigned int devfn, - int where) -{ - u32 ret; - - if (!bus->number) { - /* type 0 */ - ret = (1 << (PCI_IDSEL_BASE + PCI_SLOT(devfn))) - | (PCI_FUNC(devfn) << 8) | (where & ~3); - } else { - /* type 1 */ - ret = (bus->number << 16) | (PCI_SLOT(devfn) << 11) - | (PCI_FUNC(devfn) << 8) | (where & ~3) | 1; - } - - return ret; -} - -int ar71xx_pci_be_handler(int is_fixup) -{ - void __iomem *base = ar71xx_pcicfg_base; - u32 pci_err; - u32 ahb_err; - - pci_err = __raw_readl(base + PCI_REG_PCI_ERR) & 3; - if (pci_err) { - if (!is_fixup) - printk(KERN_ALERT "PCI error %d at PCI addr 0x%x\n", - pci_err, - __raw_readl(base + PCI_REG_PCI_ERR_ADDR)); - - __raw_writel(pci_err, base + PCI_REG_PCI_ERR); - } - - ahb_err = __raw_readl(base + PCI_REG_AHB_ERR) & 1; - if (ahb_err) { - if (!is_fixup) - printk(KERN_ALERT "AHB error at AHB address 0x%x\n", - __raw_readl(base + PCI_REG_AHB_ERR_ADDR)); - - __raw_writel(ahb_err, base + PCI_REG_AHB_ERR); - } - - return (ahb_err | pci_err) ? 1 : 0; -} - -static inline int ar71xx_pci_set_cfgaddr(struct pci_bus *bus, - unsigned int devfn, int where, int size, u32 cmd) -{ - void __iomem *base = ar71xx_pcicfg_base; - u32 addr; - - addr = ar71xx_pci_bus_addr(bus, devfn, where); - - DBG("PCI: set cfgaddr: %02x:%02x.%01x/%02x:%01d, addr=%08x\n", - bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), - where, size, addr); - - __raw_writel(addr, base + PCI_REG_CFG_AD); - __raw_writel(cmd | ar71xx_pci_get_ble(where, size, 0), - base + PCI_REG_CFG_CBE); - - return ar71xx_pci_be_handler(1); -} - -static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *value) -{ - void __iomem *base = ar71xx_pcicfg_base; - static u32 mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0}; - unsigned long flags; - u32 data; - int retry = 0; - int ret; - - ret = PCIBIOS_SUCCESSFUL; - - DBG("PCI: read config: %02x:%02x.%01x/%02x:%01d\n", bus->number, - PCI_SLOT(devfn), PCI_FUNC(devfn), where, size); - -retry: - spin_lock_irqsave(&ar71xx_pci_lock, flags); - - if (bus->number == 0 && devfn == 0) { - u32 t; - - t = PCI_CRP_CMD_READ | (where & ~3); - - __raw_writel(t, base + PCI_REG_CRP_AD_CBE); - data = __raw_readl(base + PCI_REG_CRP_RDDATA); - - DBG("PCI: rd local cfg, ad_cbe:%08x, data:%08x\n", t, data); - - } else { - int err; - - err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size, - PCI_CFG_CMD_READ); - - if (err == 0) { - data = __raw_readl(base + PCI_REG_CFG_RDDATA); - } else { - ret = PCIBIOS_DEVICE_NOT_FOUND; - data = ~0; - } - } - - spin_unlock_irqrestore(&ar71xx_pci_lock, flags); - - DBG("PCI: read config: data=%08x raw=%08x\n", - (data >> (8 * (where & 3))) & mask[size & 7], data); - - *value = (data >> (8 * (where & 3))) & mask[size & 7]; - - /* - * PCI controller bug: sometimes reads to the PCI_COMMAND register - * return 0xffff, even though the PCI trace shows the correct value. - * Work around this by retrying reads to this register - */ - if (where == PCI_COMMAND && (*value & 0xffff) == 0xffff && retry++ < 2) - goto retry; - - return ret; -} - -static int ar71xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 value) -{ - void __iomem *base = ar71xx_pcicfg_base; - unsigned long flags; - int ret; - - DBG("PCI: write config: %02x:%02x.%01x/%02x:%01d value=%08x\n", - bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), - where, size, value); - - value = value << (8 * (where & 3)); - ret = PCIBIOS_SUCCESSFUL; - - spin_lock_irqsave(&ar71xx_pci_lock, flags); - if (bus->number == 0 && devfn == 0) { - u32 t; - - t = PCI_CRP_CMD_WRITE | (where & ~3); - t |= ar71xx_pci_get_ble(where, size, 1); - - DBG("PCI: wr local cfg, ad_cbe:%08x, value:%08x\n", t, value); - - __raw_writel(t, base + PCI_REG_CRP_AD_CBE); - __raw_writel(value, base + PCI_REG_CRP_WRDATA); - } else { - int err; - - err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size, - PCI_CFG_CMD_WRITE); - - if (err == 0) - __raw_writel(value, base + PCI_REG_CFG_WRDATA); - else - ret = PCIBIOS_DEVICE_NOT_FOUND; - } - spin_unlock_irqrestore(&ar71xx_pci_lock, flags); - - return ret; -} - -static void ar71xx_pci_fixup(struct pci_dev *dev) -{ - u32 t; - - if (!ar71xx_pci_fixup_enable) - return; - - if (dev->bus->number != 0 || dev->devfn != 0) - return; - - DBG("PCI: fixup host controller %s (%04x:%04x)\n", pci_name(dev), - dev->vendor, dev->device); - - /* setup COMMAND register */ - t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE - | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK; - - pci_write_config_word(dev, PCI_COMMAND, t); -} -DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ar71xx_pci_fixup); - -int __init ar71xx_pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, - uint8_t pin) -{ - int irq = -1; - int i; - - slot -= PCI_IDSEL_ADL_START - PCI_IDSEL_BASE; - - for (i = 0; i < ar71xx_pci_nr_irqs; i++) { - struct ar71xx_pci_irq *entry; - - entry = &ar71xx_pci_irq_map[i]; - if (entry->slot == slot && entry->pin == pin) { - irq = entry->irq; - break; - } - } - - if (irq < 0) { - printk(KERN_ALERT "PCI: no irq found for pin%u@%s\n", - pin, pci_name((struct pci_dev *)dev)); - } else { - printk(KERN_INFO "PCI: mapping irq %d to pin%u@%s\n", - irq, pin, pci_name((struct pci_dev *)dev)); - } - - return irq; -} - -static struct pci_ops ar71xx_pci_ops = { - .read = ar71xx_pci_read_config, - .write = ar71xx_pci_write_config, -}; - -static struct resource ar71xx_pci_io_resource = { - .name = "PCI IO space", - .start = 0, - .end = 0, - .flags = IORESOURCE_IO, -}; - -static struct resource ar71xx_pci_mem_resource = { - .name = "PCI memory space", - .start = AR71XX_PCI_MEM_BASE, - .end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -static struct pci_controller ar71xx_pci_controller = { - .pci_ops = &ar71xx_pci_ops, - .mem_resource = &ar71xx_pci_mem_resource, - .io_resource = &ar71xx_pci_io_resource, -}; - -static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - void __iomem *base = ar71xx_reset_base; - u32 pending; - - pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) & - __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); - - if (pending & PCI_INT_DEV0) - generic_handle_irq(AR71XX_PCI_IRQ_DEV0); - - else if (pending & PCI_INT_DEV1) - generic_handle_irq(AR71XX_PCI_IRQ_DEV1); - - else if (pending & PCI_INT_DEV2) - generic_handle_irq(AR71XX_PCI_IRQ_DEV2); - - else if (pending & PCI_INT_CORE) - generic_handle_irq(AR71XX_PCI_IRQ_CORE); - - else - spurious_interrupt(); -} - -static void ar71xx_pci_irq_unmask(struct irq_data *d) -{ - unsigned int irq = d->irq - AR71XX_PCI_IRQ_BASE; - void __iomem *base = ar71xx_reset_base; - u32 t; - - t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); - __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); - - /* flush write */ - (void) __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); -} - -static void ar71xx_pci_irq_mask(struct irq_data *d) -{ - unsigned int irq = d->irq - AR71XX_PCI_IRQ_BASE; - void __iomem *base = ar71xx_reset_base; - u32 t; - - t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); - __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); - - /* flush write */ - (void) __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); -} - -static struct irq_chip ar71xx_pci_irq_chip = { - .name = "AR71XX PCI ", - .irq_mask = ar71xx_pci_irq_mask, - .irq_unmask = ar71xx_pci_irq_unmask, - .irq_mask_ack = ar71xx_pci_irq_mask, -}; - -static void __init ar71xx_pci_irq_init(void) -{ - void __iomem *base = ar71xx_reset_base; - int i; - - __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE); - __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS); - - for (i = AR71XX_PCI_IRQ_BASE; - i < AR71XX_PCI_IRQ_BASE + AR71XX_PCI_IRQ_COUNT; i++) - irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip, - handle_level_irq); - - irq_set_chained_handler(AR71XX_CPU_IRQ_IP2, ar71xx_pci_irq_handler); -} - -int __init ar71xx_pcibios_init(void) -{ - void __iomem *ddr_base = ar71xx_ddr_base; - - ar71xx_device_stop(RESET_MODULE_PCI_BUS | RESET_MODULE_PCI_CORE); - ar71xx_pci_delay(); - - ar71xx_device_start(RESET_MODULE_PCI_BUS | RESET_MODULE_PCI_CORE); - ar71xx_pci_delay(); - - ar71xx_pcicfg_base = ioremap_nocache(AR71XX_PCI_CFG_BASE, - AR71XX_PCI_CFG_SIZE); - if (ar71xx_pcicfg_base == NULL) - return -ENOMEM; - - __raw_writel(PCI_WIN0_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN0); - __raw_writel(PCI_WIN1_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN1); - __raw_writel(PCI_WIN2_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN2); - __raw_writel(PCI_WIN3_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN3); - __raw_writel(PCI_WIN4_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN4); - __raw_writel(PCI_WIN5_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN5); - __raw_writel(PCI_WIN6_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN6); - __raw_writel(PCI_WIN7_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN7); - - ar71xx_pci_delay(); - - /* clear bus errors */ - (void)ar71xx_pci_be_handler(1); - - ar71xx_pci_fixup_enable = 1; - ar71xx_pci_irq_init(); - register_pci_controller(&ar71xx_pci_controller); - - return 0; -} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/pci/pci-ar724x.c b/target/linux/ar71xx/files-2.6.39/arch/mips/pci/pci-ar724x.c deleted file mode 100644 index 57daa06148..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/pci/pci-ar724x.c +++ /dev/null @@ -1,389 +0,0 @@ -/* - * Atheros AR724x PCI host controller driver - * - * Copyright (C) 2009-2010 Gabor Juhos - * - * Parts of this file are based on Atheros' 2.6.15 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#undef DEBUG -#ifdef DEBUG -#define DBG(fmt, args...) printk(KERN_INFO fmt, ## args) -#else -#define DBG(fmt, args...) -#endif - -static void __iomem *ar724x_pci_localcfg_base; -static void __iomem *ar724x_pci_devcfg_base; -static void __iomem *ar724x_pci_ctrl_base; -static int ar724x_pci_fixup_enable; - -static DEFINE_SPINLOCK(ar724x_pci_lock); - -static void ar724x_pci_read(void __iomem *base, int where, int size, u32 *value) -{ - unsigned long flags; - u32 data; - - spin_lock_irqsave(&ar724x_pci_lock, flags); - data = __raw_readl(base + (where & ~3)); - - switch (size) { - case 1: - if (where & 1) - data >>= 8; - if (where & 2) - data >>= 16; - data &= 0xFF; - break; - case 2: - if (where & 2) - data >>= 16; - data &= 0xFFFF; - break; - } - - *value = data; - spin_unlock_irqrestore(&ar724x_pci_lock, flags); -} - -static void ar724x_pci_write(void __iomem *base, int where, int size, u32 value) -{ - unsigned long flags; - u32 data; - int s; - - spin_lock_irqsave(&ar724x_pci_lock, flags); - data = __raw_readl(base + (where & ~3)); - - switch (size) { - case 1: - s = ((where & 3) << 3); - data &= ~(0xFF << s); - data |= ((value & 0xFF) << s); - break; - case 2: - s = ((where & 2) << 3); - data &= ~(0xFFFF << s); - data |= ((value & 0xFFFF) << s); - break; - case 4: - data = value; - break; - } - - __raw_writel(data, base + (where & ~3)); - /* flush write */ - (void)__raw_readl(base + (where & ~3)); - spin_unlock_irqrestore(&ar724x_pci_lock, flags); -} - -static int ar724x_pci_read_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *value) -{ - - if (bus->number != 0 || devfn != 0) - return PCIBIOS_DEVICE_NOT_FOUND; - - ar724x_pci_read(ar724x_pci_devcfg_base, where, size, value); - - DBG("PCI: read config: %02x:%02x.%01x/%02x:%01d, value=%08x\n", - bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), - where, size, *value); - - /* - * WAR for BAR issue - We are unable to access the PCI device space - * if we set the BAR with proper base address - */ - if ((where == 0x10) && (size == 4)) { - u32 val; - val = (ar71xx_soc == AR71XX_SOC_AR7240) ? 0xffff : 0x1000ffff; - ar724x_pci_write(ar724x_pci_devcfg_base, where, size, val); - } - - return PCIBIOS_SUCCESSFUL; -} - -static int ar724x_pci_write_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 value) -{ - if (bus->number != 0 || devfn != 0) - return PCIBIOS_DEVICE_NOT_FOUND; - - DBG("PCI: write config: %02x:%02x.%01x/%02x:%01d, value=%08x\n", - bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), - where, size, value); - - ar724x_pci_write(ar724x_pci_devcfg_base, where, size, value); - - return PCIBIOS_SUCCESSFUL; -} - -static void ar724x_pci_fixup(struct pci_dev *dev) -{ - u16 cmd; - - if (!ar724x_pci_fixup_enable) - return; - - if (dev->bus->number != 0 || dev->devfn != 0) - return; - - /* setup COMMAND register */ - pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | - PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | - PCI_COMMAND_FAST_BACK; - - pci_write_config_word(dev, PCI_COMMAND, cmd); -} -DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ar724x_pci_fixup); - -int __init ar724x_pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, - uint8_t pin) -{ - int irq = -1; - int i; - - for (i = 0; i < ar71xx_pci_nr_irqs; i++) { - struct ar71xx_pci_irq *entry; - entry = &ar71xx_pci_irq_map[i]; - - if (entry->slot == slot && entry->pin == pin) { - irq = entry->irq; - break; - } - } - - if (irq < 0) - printk(KERN_ALERT "PCI: no irq found for pin%u@%s\n", - pin, pci_name((struct pci_dev *)dev)); - else - printk(KERN_INFO "PCI: mapping irq %d to pin%u@%s\n", - irq, pin, pci_name((struct pci_dev *)dev)); - - return irq; -} - -static struct pci_ops ar724x_pci_ops = { - .read = ar724x_pci_read_config, - .write = ar724x_pci_write_config, -}; - -static struct resource ar724x_pci_io_resource = { - .name = "PCI IO space", - .start = 0, - .end = 0, - .flags = IORESOURCE_IO, -}; - -static struct resource ar724x_pci_mem_resource = { - .name = "PCI memory space", - .start = AR71XX_PCI_MEM_BASE, - .end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -static struct pci_controller ar724x_pci_controller = { - .pci_ops = &ar724x_pci_ops, - .mem_resource = &ar724x_pci_mem_resource, - .io_resource = &ar724x_pci_io_resource, -}; - -static void __init ar724x_pci_reset(void) -{ - ar71xx_device_stop(AR724X_RESET_PCIE); - ar71xx_device_stop(AR724X_RESET_PCIE_PHY); - ar71xx_device_stop(AR724X_RESET_PCIE_PHY_SERIAL); - udelay(100); - - ar71xx_device_start(AR724X_RESET_PCIE_PHY_SERIAL); - udelay(100); - ar71xx_device_start(AR724X_RESET_PCIE_PHY); - ar71xx_device_start(AR724X_RESET_PCIE); -} - -static int __init ar724x_pci_setup(void) -{ - void __iomem *base = ar724x_pci_ctrl_base; - u32 t; - - /* setup COMMAND register */ - t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE | - PCI_COMMAND_PARITY|PCI_COMMAND_SERR|PCI_COMMAND_FAST_BACK; - - ar724x_pci_write(ar724x_pci_localcfg_base, PCI_COMMAND, 4, t); - ar724x_pci_write(ar724x_pci_localcfg_base, 0x20, 4, 0x1ff01000); - ar724x_pci_write(ar724x_pci_localcfg_base, 0x24, 4, 0x1ff01000); - - t = __raw_readl(base + AR724X_PCI_REG_RESET); - if (t != 0x7) { - udelay(100000); - __raw_writel(0, base + AR724X_PCI_REG_RESET); - udelay(100); - __raw_writel(4, base + AR724X_PCI_REG_RESET); - udelay(100000); - } - - if (ar71xx_soc == AR71XX_SOC_AR7240) - t = AR724X_PCI_APP_LTSSM_ENABLE; - else - t = 0x1ffc1; - __raw_writel(t, base + AR724X_PCI_REG_APP); - /* flush write */ - (void) __raw_readl(base + AR724X_PCI_REG_APP); - udelay(1000); - - t = __raw_readl(base + AR724X_PCI_REG_RESET); - if ((t & AR724X_PCI_RESET_LINK_UP) == 0x0) { - printk(KERN_WARNING "PCI: no PCIe module found\n"); - return -ENODEV; - } - - if (ar71xx_soc == AR71XX_SOC_AR7241 || - ar71xx_soc == AR71XX_SOC_AR7242) { - t = __raw_readl(base + AR724X_PCI_REG_APP); - t |= BIT(16); - __raw_writel(t, base + AR724X_PCI_REG_APP); - } - - return 0; -} - -static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - void __iomem *base = ar724x_pci_ctrl_base; - u32 pending; - - pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) & - __raw_readl(base + AR724X_PCI_REG_INT_MASK); - - if (pending & AR724X_PCI_INT_DEV0) - generic_handle_irq(AR71XX_PCI_IRQ_DEV0); - - else - spurious_interrupt(); -} - -static void ar724x_pci_irq_unmask(struct irq_data *d) -{ - void __iomem *base = ar724x_pci_ctrl_base; - u32 t; - - switch (d->irq) { - case AR71XX_PCI_IRQ_DEV0: - t = __raw_readl(base + AR724X_PCI_REG_INT_MASK); - __raw_writel(t | AR724X_PCI_INT_DEV0, - base + AR724X_PCI_REG_INT_MASK); - /* flush write */ - (void) __raw_readl(base + AR724X_PCI_REG_INT_MASK); - } -} - -static void ar724x_pci_irq_mask(struct irq_data *d) -{ - void __iomem *base = ar724x_pci_ctrl_base; - u32 t; - - switch (d->irq) { - case AR71XX_PCI_IRQ_DEV0: - t = __raw_readl(base + AR724X_PCI_REG_INT_MASK); - __raw_writel(t & ~AR724X_PCI_INT_DEV0, - base + AR724X_PCI_REG_INT_MASK); - - /* flush write */ - (void) __raw_readl(base + AR724X_PCI_REG_INT_MASK); - - t = __raw_readl(base + AR724X_PCI_REG_INT_STATUS); - __raw_writel(t | AR724X_PCI_INT_DEV0, - base + AR724X_PCI_REG_INT_STATUS); - - /* flush write */ - (void) __raw_readl(base + AR724X_PCI_REG_INT_STATUS); - } -} - -static struct irq_chip ar724x_pci_irq_chip = { - .name = "AR724X PCI ", - .irq_mask = ar724x_pci_irq_mask, - .irq_unmask = ar724x_pci_irq_unmask, - .irq_mask_ack = ar724x_pci_irq_mask, -}; - -static void __init ar724x_pci_irq_init(int irq) -{ - void __iomem *base = ar724x_pci_ctrl_base; - u32 t; - int i; - - t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE); - if (t & (AR724X_RESET_PCIE | AR724X_RESET_PCIE_PHY | - AR724X_RESET_PCIE_PHY_SERIAL)) { - return; - } - - __raw_writel(0, base + AR724X_PCI_REG_INT_MASK); - __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS); - - for (i = AR71XX_PCI_IRQ_BASE; - i < AR71XX_PCI_IRQ_BASE + AR71XX_PCI_IRQ_COUNT; i++) - irq_set_chip_and_handler(i, &ar724x_pci_irq_chip, - handle_level_irq); - - irq_set_chained_handler(irq, ar724x_pci_irq_handler); -} - -int __init ar724x_pcibios_init(int irq) -{ - int ret = -ENOMEM; - - ar724x_pci_localcfg_base = ioremap_nocache(AR724X_PCI_CRP_BASE, - AR724X_PCI_CRP_SIZE); - if (ar724x_pci_localcfg_base == NULL) - goto err; - - ar724x_pci_devcfg_base = ioremap_nocache(AR724X_PCI_CFG_BASE, - AR724X_PCI_CFG_SIZE); - if (ar724x_pci_devcfg_base == NULL) - goto err_unmap_localcfg; - - ar724x_pci_ctrl_base = ioremap_nocache(AR724X_PCI_CTRL_BASE, - AR724X_PCI_CTRL_SIZE); - if (ar724x_pci_ctrl_base == NULL) - goto err_unmap_devcfg; - - ar724x_pci_reset(); - ret = ar724x_pci_setup(); - if (ret) - goto err_unmap_ctrl; - - ar724x_pci_fixup_enable = 1; - ar724x_pci_irq_init(irq); - register_pci_controller(&ar724x_pci_controller); - - return 0; - -err_unmap_ctrl: - iounmap(ar724x_pci_ctrl_base); -err_unmap_devcfg: - iounmap(ar724x_pci_devcfg_base); -err_unmap_localcfg: - iounmap(ar724x_pci_localcfg_base); -err: - return ret; -} diff --git a/target/linux/ar71xx/files-2.6.39/drivers/mtd/maps/ar91xx_flash.c b/target/linux/ar71xx/files-2.6.39/drivers/mtd/maps/ar91xx_flash.c deleted file mode 100644 index 51ba7f5780..0000000000 --- a/target/linux/ar71xx/files-2.6.39/drivers/mtd/maps/ar91xx_flash.c +++ /dev/null @@ -1,310 +0,0 @@ -/* - * Parallel flash driver for the Atheros AR91xx SoC - * - * Copyright (C) 2009 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define DRV_NAME "ar91xx-flash" - -struct ar91xx_flash_info { - struct mtd_info *mtd; - struct map_info map; -#ifdef CONFIG_MTD_PARTITIONS - int nr_parts; - struct mtd_partition *parts; -#endif -}; - -static map_word ar91xx_flash_read(struct map_info *map, unsigned long ofs) -{ - map_word val; - - if (map_bankwidth_is_1(map)) - val.x[0] = __raw_readb(map->virt + (ofs ^ 3)); - else if (map_bankwidth_is_2(map)) - val.x[0] = __raw_readw(map->virt + (ofs ^ 2)); - else - val = map_word_ff(map); - - return val; -} - -static void ar91xx_flash_write(struct map_info *map, map_word d, - unsigned long ofs) -{ - if (map_bankwidth_is_1(map)) - __raw_writeb(d.x[0], map->virt + (ofs ^ 3)); - else if (map_bankwidth_is_2(map)) - __raw_writew(d.x[0], map->virt + (ofs ^ 2)); - - mb(); -} - -static map_word ar91xx_flash_read_lock(struct map_info *map, unsigned long ofs) -{ - map_word ret; - - ar71xx_flash_acquire(); - ret = ar91xx_flash_read(map, ofs); - ar71xx_flash_release(); - - return ret; -} - -static void ar91xx_flash_write_lock(struct map_info *map, map_word d, - unsigned long ofs) -{ - ar71xx_flash_acquire(); - ar91xx_flash_write(map, d, ofs); - ar71xx_flash_release(); -} - -static void ar91xx_flash_copy_from_lock(struct map_info *map, void *to, - unsigned long from, ssize_t len) -{ - ar71xx_flash_acquire(); - inline_map_copy_from(map, to, from, len); - ar71xx_flash_release(); -} - -static void ar91xx_flash_copy_to_lock(struct map_info *map, unsigned long to, - const void *from, ssize_t len) -{ - ar71xx_flash_acquire(); - inline_map_copy_to(map, to, from, len); - ar71xx_flash_release(); -} - -static int ar91xx_flash_remove(struct platform_device *pdev) -{ - struct ar91xx_flash_platform_data *pdata; - struct ar91xx_flash_info *info; - - info = platform_get_drvdata(pdev); - if (info == NULL) - return 0; - - platform_set_drvdata(pdev, NULL); - - if (info->mtd == NULL) - return 0; - - pdata = pdev->dev.platform_data; -#ifdef CONFIG_MTD_PARTITIONS - if (info->nr_parts) { - del_mtd_partitions(info->mtd); - kfree(info->parts); - } else if (pdata->nr_parts) { - del_mtd_partitions(info->mtd); - } else { - del_mtd_device(info->mtd); - } -#else - del_mtd_device(info->mtd); -#endif - map_destroy(info->mtd); - - return 0; -} - -static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL }; -#ifdef CONFIG_MTD_PARTITIONS -static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; -#endif - -static int ar91xx_flash_probe(struct platform_device *pdev) -{ - struct ar91xx_flash_platform_data *pdata; - struct ar91xx_flash_info *info; - struct resource *res; - struct resource *region; - const char **probe_type; - int err = 0; - - pdata = pdev->dev.platform_data; - if (pdata == NULL) - return -EINVAL; - - info = devm_kzalloc(&pdev->dev, sizeof(struct ar91xx_flash_info), - GFP_KERNEL); - if (info == NULL) { - err = -ENOMEM; - goto err_out; - } - - platform_set_drvdata(pdev, info); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - err = -ENOENT; - goto err_out; - } - - dev_info(&pdev->dev, "%.8llx at %.8llx\n", - (unsigned long long)(res->end - res->start + 1), - (unsigned long long)res->start); - - region = devm_request_mem_region(&pdev->dev, - res->start, res->end - res->start + 1, - dev_name(&pdev->dev)); - if (region == NULL) { - dev_err(&pdev->dev, "could not reserve memory region\n"); - err = -ENOMEM; - goto err_out; - } - - info->map.name = dev_name(&pdev->dev); - info->map.phys = res->start; - info->map.size = res->end - res->start + 1; - info->map.bankwidth = pdata->width; - - info->map.virt = devm_ioremap(&pdev->dev, info->map.phys, - info->map.size); - if (info->map.virt == NULL) { - dev_err(&pdev->dev, "failed to ioremap flash region\n"); - err = -EIO; - goto err_out; - } - - simple_map_init(&info->map); - if (pdata->is_shared) { - info->map.read = ar91xx_flash_read_lock; - info->map.write = ar91xx_flash_write_lock; - info->map.copy_from = ar91xx_flash_copy_from_lock; - info->map.copy_to = ar91xx_flash_copy_to_lock; - } else { - info->map.read = ar91xx_flash_read; - info->map.write = ar91xx_flash_write; - } - - probe_type = rom_probe_types; - for (; info->mtd == NULL && *probe_type != NULL; probe_type++) - info->mtd = do_map_probe(*probe_type, &info->map); - - if (info->mtd == NULL) { - dev_err(&pdev->dev, "map_probe failed\n"); - err = -ENXIO; - goto err_out; - } - - info->mtd->owner = THIS_MODULE; - -#ifdef CONFIG_MTD_PARTITIONS - if (pdata->nr_parts) { - dev_info(&pdev->dev, "using static partition mapping\n"); - add_mtd_partitions(info->mtd, pdata->parts, pdata->nr_parts); - return 0; - } - - err = parse_mtd_partitions(info->mtd, part_probe_types, - &info->parts, 0); - if (err > 0) { - add_mtd_partitions(info->mtd, info->parts, err); - return 0; - } -#endif - - add_mtd_device(info->mtd); - return 0; - -err_out: - ar91xx_flash_remove(pdev); - return err; -} - -#ifdef CONFIG_PM -static int ar91xx_flash_suspend(struct platform_device *dev, pm_message_t state) -{ - struct ar91xx_flash_info *info = platform_get_drvdata(dev); - int ret = 0; - - if (info->mtd->suspend) - ret = info->mtd->suspend(info->mtd); - - if (ret) - goto fail; - - return 0; - -fail: - if (info->mtd->suspend) { - BUG_ON(!info->mtd->resume); - info->mtd->resume(info->mtd); - } - - return ret; -} - -static int ar91xx_flash_resume(struct platform_device *pdev) -{ - struct ar91xx_flash_info *info = platform_get_drvdata(pdev); - - if (info->mtd->resume) - info->mtd->resume(info->mtd); - - return 0; -} - -static void ar91xx_flash_shutdown(struct platform_device *pdev) -{ - struct ar91xx_flash_info *info = platform_get_drvdata(pdev); - - if (info->mtd->suspend && info->mtd->resume) - if (info->mtd->suspend(info->mtd) == 0) - info->mtd->resume(info->mtd); -} -#else -#define ar91xx_flash_suspend NULL -#define ar91xx_flash_resume NULL -#define ar91xx_flash_shutdown NULL -#endif - -static struct platform_driver ar91xx_flash_driver = { - .probe = ar91xx_flash_probe, - .remove = ar91xx_flash_remove, - .suspend = ar91xx_flash_suspend, - .resume = ar91xx_flash_resume, - .shutdown = ar91xx_flash_shutdown, - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init ar91xx_flash_init(void) -{ - return platform_driver_register(&ar91xx_flash_driver); -} - -static void __exit ar91xx_flash_exit(void) -{ - platform_driver_unregister(&ar91xx_flash_driver); -} - -module_init(ar91xx_flash_init); -module_exit(ar91xx_flash_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Gabor Juhos "); -MODULE_DESCRIPTION("Parallel flash driver for the Atheros AR91xx SoC"); -MODULE_ALIAS("platform:" DRV_NAME); diff --git a/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/Kconfig b/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/Kconfig deleted file mode 100644 index 7db779e38c..0000000000 --- a/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/Kconfig +++ /dev/null @@ -1,33 +0,0 @@ -config AG71XX - tristate "Atheros AR71xx built-in ethernet mac support" - depends on ATHEROS_AR71XX - select PHYLIB - help - If you wish to compile a kernel for AR71xx/91xx and enable - ethernet support, then you should always answer Y to this. - -if AG71XX - -config AG71XX_DEBUG - bool "Atheros AR71xx built-in ethernet driver debugging" - default n - help - Atheros AR71xx built-in ethernet driver debugging messages. - -config AG71XX_DEBUG_FS - bool "Atheros AR71xx built-in ethernet driver debugfs support" - depends on DEBUG_FS - default n - help - Say Y, if you need access to various statistics provided by - the ag71xx driver. - -config AG71XX_AR8216_SUPPORT - bool "special support for the Atheros AR8216 switch" - default n - default y if AR71XX_MACH_WNR2000 || AR71XX_MACH_MZK_W04NU - help - Say 'y' here if you want to enable special support for the - Atheros AR8216 switch found on some boards. - -endif diff --git a/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/Makefile b/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/Makefile deleted file mode 100644 index b3ec4084c8..0000000000 --- a/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# -# Makefile for the Atheros AR71xx built-in ethernet macs -# - -ag71xx-y += ag71xx_main.o -ag71xx-y += ag71xx_ethtool.o -ag71xx-y += ag71xx_phy.o -ag71xx-y += ag71xx_mdio.o -ag71xx-y += ag71xx_ar7240.o - -ag71xx-$(CONFIG_AG71XX_DEBUG_FS) += ag71xx_debugfs.o -ag71xx-$(CONFIG_AG71XX_AR8216_SUPPORT) += ag71xx_ar8216.o - -obj-$(CONFIG_AG71XX) += ag71xx.o - diff --git a/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx.h b/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx.h deleted file mode 100644 index 97e5fb2840..0000000000 --- a/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx.h +++ /dev/null @@ -1,465 +0,0 @@ -/* - * Atheros AR71xx built-in ethernet mac driver - * - * Copyright (C) 2008-2010 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Based on Atheros' AG7100 driver - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __AG71XX_H -#define __AG71XX_H - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include - -#define AG71XX_DRV_NAME "ag71xx" -#define AG71XX_DRV_VERSION "0.5.35" - -#define AG71XX_NAPI_WEIGHT 64 -#define AG71XX_OOM_REFILL (1 + HZ/10) - -#define AG71XX_INT_ERR (AG71XX_INT_RX_BE | AG71XX_INT_TX_BE) -#define AG71XX_INT_TX (AG71XX_INT_TX_PS) -#define AG71XX_INT_RX (AG71XX_INT_RX_PR | AG71XX_INT_RX_OF) - -#define AG71XX_INT_POLL (AG71XX_INT_RX | AG71XX_INT_TX) -#define AG71XX_INT_INIT (AG71XX_INT_ERR | AG71XX_INT_POLL) - -#define AG71XX_TX_MTU_LEN 1540 -#define AG71XX_RX_PKT_RESERVE 64 -#define AG71XX_RX_PKT_SIZE \ - (AG71XX_RX_PKT_RESERVE + ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN) - -#define AG71XX_TX_RING_SIZE_DEFAULT 64 -#define AG71XX_RX_RING_SIZE_DEFAULT 128 - -#define AG71XX_TX_RING_SIZE_MAX 256 -#define AG71XX_RX_RING_SIZE_MAX 256 - -#ifdef CONFIG_AG71XX_DEBUG -#define DBG(fmt, args...) printk(KERN_DEBUG fmt, ## args) -#else -#define DBG(fmt, args...) do {} while (0) -#endif - -#define ag71xx_assert(_cond) \ -do { \ - if (_cond) \ - break; \ - printk("%s,%d: assertion failed\n", __FILE__, __LINE__); \ - BUG(); \ -} while (0) - -struct ag71xx_desc { - u32 data; - u32 ctrl; -#define DESC_EMPTY BIT(31) -#define DESC_MORE BIT(24) -#define DESC_PKTLEN_M 0xfff - u32 next; - u32 pad; -} __attribute__((aligned(4))); - -struct ag71xx_buf { - struct sk_buff *skb; - struct ag71xx_desc *desc; - dma_addr_t dma_addr; - unsigned long timestamp; -}; - -struct ag71xx_ring { - struct ag71xx_buf *buf; - u8 *descs_cpu; - dma_addr_t descs_dma; - unsigned int desc_size; - unsigned int curr; - unsigned int dirty; - unsigned int size; -}; - -struct ag71xx_mdio { - struct mii_bus *mii_bus; - int mii_irq[PHY_MAX_ADDR]; - void __iomem *mdio_base; - struct ag71xx_mdio_platform_data *pdata; -}; - -struct ag71xx_int_stats { - unsigned long rx_pr; - unsigned long rx_be; - unsigned long rx_of; - unsigned long tx_ps; - unsigned long tx_be; - unsigned long tx_ur; - unsigned long total; -}; - -struct ag71xx_napi_stats { - unsigned long napi_calls; - unsigned long rx_count; - unsigned long rx_packets; - unsigned long rx_packets_max; - unsigned long tx_count; - unsigned long tx_packets; - unsigned long tx_packets_max; - - unsigned long rx[AG71XX_NAPI_WEIGHT + 1]; - unsigned long tx[AG71XX_NAPI_WEIGHT + 1]; -}; - -struct ag71xx_debug { - struct dentry *debugfs_dir; - - struct ag71xx_int_stats int_stats; - struct ag71xx_napi_stats napi_stats; -}; - -struct ag71xx { - void __iomem *mac_base; - - spinlock_t lock; - struct platform_device *pdev; - struct net_device *dev; - struct napi_struct napi; - u32 msg_enable; - - struct ag71xx_desc *stop_desc; - dma_addr_t stop_desc_dma; - - struct ag71xx_ring rx_ring; - struct ag71xx_ring tx_ring; - - struct mii_bus *mii_bus; - struct phy_device *phy_dev; - void *phy_priv; - - unsigned int link; - unsigned int speed; - int duplex; - - struct work_struct restart_work; - struct delayed_work link_work; - struct timer_list oom_timer; - -#ifdef CONFIG_AG71XX_DEBUG_FS - struct ag71xx_debug debug; -#endif -}; - -extern struct ethtool_ops ag71xx_ethtool_ops; -void ag71xx_link_adjust(struct ag71xx *ag); - -int ag71xx_mdio_driver_init(void) __init; -void ag71xx_mdio_driver_exit(void); - -int ag71xx_phy_connect(struct ag71xx *ag); -void ag71xx_phy_disconnect(struct ag71xx *ag); -void ag71xx_phy_start(struct ag71xx *ag); -void ag71xx_phy_stop(struct ag71xx *ag); - -static inline struct ag71xx_platform_data *ag71xx_get_pdata(struct ag71xx *ag) -{ - return ag->pdev->dev.platform_data; -} - -static inline int ag71xx_desc_empty(struct ag71xx_desc *desc) -{ - return (desc->ctrl & DESC_EMPTY) != 0; -} - -static inline int ag71xx_desc_pktlen(struct ag71xx_desc *desc) -{ - return desc->ctrl & DESC_PKTLEN_M; -} - -/* Register offsets */ -#define AG71XX_REG_MAC_CFG1 0x0000 -#define AG71XX_REG_MAC_CFG2 0x0004 -#define AG71XX_REG_MAC_IPG 0x0008 -#define AG71XX_REG_MAC_HDX 0x000c -#define AG71XX_REG_MAC_MFL 0x0010 -#define AG71XX_REG_MII_CFG 0x0020 -#define AG71XX_REG_MII_CMD 0x0024 -#define AG71XX_REG_MII_ADDR 0x0028 -#define AG71XX_REG_MII_CTRL 0x002c -#define AG71XX_REG_MII_STATUS 0x0030 -#define AG71XX_REG_MII_IND 0x0034 -#define AG71XX_REG_MAC_IFCTL 0x0038 -#define AG71XX_REG_MAC_ADDR1 0x0040 -#define AG71XX_REG_MAC_ADDR2 0x0044 -#define AG71XX_REG_FIFO_CFG0 0x0048 -#define AG71XX_REG_FIFO_CFG1 0x004c -#define AG71XX_REG_FIFO_CFG2 0x0050 -#define AG71XX_REG_FIFO_CFG3 0x0054 -#define AG71XX_REG_FIFO_CFG4 0x0058 -#define AG71XX_REG_FIFO_CFG5 0x005c -#define AG71XX_REG_FIFO_RAM0 0x0060 -#define AG71XX_REG_FIFO_RAM1 0x0064 -#define AG71XX_REG_FIFO_RAM2 0x0068 -#define AG71XX_REG_FIFO_RAM3 0x006c -#define AG71XX_REG_FIFO_RAM4 0x0070 -#define AG71XX_REG_FIFO_RAM5 0x0074 -#define AG71XX_REG_FIFO_RAM6 0x0078 -#define AG71XX_REG_FIFO_RAM7 0x007c - -#define AG71XX_REG_TX_CTRL 0x0180 -#define AG71XX_REG_TX_DESC 0x0184 -#define AG71XX_REG_TX_STATUS 0x0188 -#define AG71XX_REG_RX_CTRL 0x018c -#define AG71XX_REG_RX_DESC 0x0190 -#define AG71XX_REG_RX_STATUS 0x0194 -#define AG71XX_REG_INT_ENABLE 0x0198 -#define AG71XX_REG_INT_STATUS 0x019c - -#define AG71XX_REG_FIFO_DEPTH 0x01a8 -#define AG71XX_REG_RX_SM 0x01b0 -#define AG71XX_REG_TX_SM 0x01b4 - -#define MAC_CFG1_TXE BIT(0) /* Tx Enable */ -#define MAC_CFG1_STX BIT(1) /* Synchronize Tx Enable */ -#define MAC_CFG1_RXE BIT(2) /* Rx Enable */ -#define MAC_CFG1_SRX BIT(3) /* Synchronize Rx Enable */ -#define MAC_CFG1_TFC BIT(4) /* Tx Flow Control Enable */ -#define MAC_CFG1_RFC BIT(5) /* Rx Flow Control Enable */ -#define MAC_CFG1_LB BIT(8) /* Loopback mode */ -#define MAC_CFG1_SR BIT(31) /* Soft Reset */ - -#define MAC_CFG2_FDX BIT(0) -#define MAC_CFG2_CRC_EN BIT(1) -#define MAC_CFG2_PAD_CRC_EN BIT(2) -#define MAC_CFG2_LEN_CHECK BIT(4) -#define MAC_CFG2_HUGE_FRAME_EN BIT(5) -#define MAC_CFG2_IF_1000 BIT(9) -#define MAC_CFG2_IF_10_100 BIT(8) - -#define FIFO_CFG0_WTM BIT(0) /* Watermark Module */ -#define FIFO_CFG0_RXS BIT(1) /* Rx System Module */ -#define FIFO_CFG0_RXF BIT(2) /* Rx Fabric Module */ -#define FIFO_CFG0_TXS BIT(3) /* Tx System Module */ -#define FIFO_CFG0_TXF BIT(4) /* Tx Fabric Module */ -#define FIFO_CFG0_ALL (FIFO_CFG0_WTM | FIFO_CFG0_RXS | FIFO_CFG0_RXF \ - | FIFO_CFG0_TXS | FIFO_CFG0_TXF) - -#define FIFO_CFG0_ENABLE_SHIFT 8 - -#define FIFO_CFG4_DE BIT(0) /* Drop Event */ -#define FIFO_CFG4_DV BIT(1) /* RX_DV Event */ -#define FIFO_CFG4_FC BIT(2) /* False Carrier */ -#define FIFO_CFG4_CE BIT(3) /* Code Error */ -#define FIFO_CFG4_CR BIT(4) /* CRC error */ -#define FIFO_CFG4_LM BIT(5) /* Length Mismatch */ -#define FIFO_CFG4_LO BIT(6) /* Length out of range */ -#define FIFO_CFG4_OK BIT(7) /* Packet is OK */ -#define FIFO_CFG4_MC BIT(8) /* Multicast Packet */ -#define FIFO_CFG4_BC BIT(9) /* Broadcast Packet */ -#define FIFO_CFG4_DR BIT(10) /* Dribble */ -#define FIFO_CFG4_LE BIT(11) /* Long Event */ -#define FIFO_CFG4_CF BIT(12) /* Control Frame */ -#define FIFO_CFG4_PF BIT(13) /* Pause Frame */ -#define FIFO_CFG4_UO BIT(14) /* Unsupported Opcode */ -#define FIFO_CFG4_VT BIT(15) /* VLAN tag detected */ -#define FIFO_CFG4_FT BIT(16) /* Frame Truncated */ -#define FIFO_CFG4_UC BIT(17) /* Unicast Packet */ - -#define FIFO_CFG5_DE BIT(0) /* Drop Event */ -#define FIFO_CFG5_DV BIT(1) /* RX_DV Event */ -#define FIFO_CFG5_FC BIT(2) /* False Carrier */ -#define FIFO_CFG5_CE BIT(3) /* Code Error */ -#define FIFO_CFG5_LM BIT(4) /* Length Mismatch */ -#define FIFO_CFG5_LO BIT(5) /* Length Out of Range */ -#define FIFO_CFG5_OK BIT(6) /* Packet is OK */ -#define FIFO_CFG5_MC BIT(7) /* Multicast Packet */ -#define FIFO_CFG5_BC BIT(8) /* Broadcast Packet */ -#define FIFO_CFG5_DR BIT(9) /* Dribble */ -#define FIFO_CFG5_CF BIT(10) /* Control Frame */ -#define FIFO_CFG5_PF BIT(11) /* Pause Frame */ -#define FIFO_CFG5_UO BIT(12) /* Unsupported Opcode */ -#define FIFO_CFG5_VT BIT(13) /* VLAN tag detected */ -#define FIFO_CFG5_LE BIT(14) /* Long Event */ -#define FIFO_CFG5_FT BIT(15) /* Frame Truncated */ -#define FIFO_CFG5_16 BIT(16) /* unknown */ -#define FIFO_CFG5_17 BIT(17) /* unknown */ -#define FIFO_CFG5_SF BIT(18) /* Short Frame */ -#define FIFO_CFG5_BM BIT(19) /* Byte Mode */ - -#define AG71XX_INT_TX_PS BIT(0) -#define AG71XX_INT_TX_UR BIT(1) -#define AG71XX_INT_TX_BE BIT(3) -#define AG71XX_INT_RX_PR BIT(4) -#define AG71XX_INT_RX_OF BIT(6) -#define AG71XX_INT_RX_BE BIT(7) - -#define MAC_IFCTL_SPEED BIT(16) - -#define MII_CFG_CLK_DIV_4 0 -#define MII_CFG_CLK_DIV_6 2 -#define MII_CFG_CLK_DIV_8 3 -#define MII_CFG_CLK_DIV_10 4 -#define MII_CFG_CLK_DIV_14 5 -#define MII_CFG_CLK_DIV_20 6 -#define MII_CFG_CLK_DIV_28 7 -#define MII_CFG_RESET BIT(31) - -#define MII_CMD_WRITE 0x0 -#define MII_CMD_READ 0x1 -#define MII_ADDR_SHIFT 8 -#define MII_IND_BUSY BIT(0) -#define MII_IND_INVALID BIT(2) - -#define TX_CTRL_TXE BIT(0) /* Tx Enable */ - -#define TX_STATUS_PS BIT(0) /* Packet Sent */ -#define TX_STATUS_UR BIT(1) /* Tx Underrun */ -#define TX_STATUS_BE BIT(3) /* Bus Error */ - -#define RX_CTRL_RXE BIT(0) /* Rx Enable */ - -#define RX_STATUS_PR BIT(0) /* Packet Received */ -#define RX_STATUS_OF BIT(2) /* Rx Overflow */ -#define RX_STATUS_BE BIT(3) /* Bus Error */ - -static inline void ag71xx_check_reg_offset(struct ag71xx *ag, unsigned reg) -{ - switch (reg) { - case AG71XX_REG_MAC_CFG1 ... AG71XX_REG_MAC_MFL: - case AG71XX_REG_MAC_IFCTL ... AG71XX_REG_TX_SM: - case AG71XX_REG_MII_CFG: - break; - - default: - BUG(); - } -} - -static inline void ag71xx_wr(struct ag71xx *ag, unsigned reg, u32 value) -{ - ag71xx_check_reg_offset(ag, reg); - - __raw_writel(value, ag->mac_base + reg); - /* flush write */ - (void) __raw_readl(ag->mac_base + reg); -} - -static inline u32 ag71xx_rr(struct ag71xx *ag, unsigned reg) -{ - ag71xx_check_reg_offset(ag, reg); - - return __raw_readl(ag->mac_base + reg); -} - -static inline void ag71xx_sb(struct ag71xx *ag, unsigned reg, u32 mask) -{ - void __iomem *r; - - ag71xx_check_reg_offset(ag, reg); - - r = ag->mac_base + reg; - __raw_writel(__raw_readl(r) | mask, r); - /* flush write */ - (void)__raw_readl(r); -} - -static inline void ag71xx_cb(struct ag71xx *ag, unsigned reg, u32 mask) -{ - void __iomem *r; - - ag71xx_check_reg_offset(ag, reg); - - r = ag->mac_base + reg; - __raw_writel(__raw_readl(r) & ~mask, r); - /* flush write */ - (void) __raw_readl(r); -} - -static inline void ag71xx_int_enable(struct ag71xx *ag, u32 ints) -{ - ag71xx_sb(ag, AG71XX_REG_INT_ENABLE, ints); -} - -static inline void ag71xx_int_disable(struct ag71xx *ag, u32 ints) -{ - ag71xx_cb(ag, AG71XX_REG_INT_ENABLE, ints); -} - -#ifdef CONFIG_AG71XX_AR8216_SUPPORT -void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb); -int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb, - int pktlen); -static inline int ag71xx_has_ar8216(struct ag71xx *ag) -{ - return ag71xx_get_pdata(ag)->has_ar8216; -} -#else -static inline void ag71xx_add_ar8216_header(struct ag71xx *ag, - struct sk_buff *skb) -{ -} - -static inline int ag71xx_remove_ar8216_header(struct ag71xx *ag, - struct sk_buff *skb, - int pktlen) -{ - return 0; -} -static inline int ag71xx_has_ar8216(struct ag71xx *ag) -{ - return 0; -} -#endif - -#ifdef CONFIG_AG71XX_DEBUG_FS -int ag71xx_debugfs_root_init(void); -void ag71xx_debugfs_root_exit(void); -int ag71xx_debugfs_init(struct ag71xx *ag); -void ag71xx_debugfs_exit(struct ag71xx *ag); -void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status); -void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx); -#else -static inline int ag71xx_debugfs_root_init(void) { return 0; } -static inline void ag71xx_debugfs_root_exit(void) {} -static inline int ag71xx_debugfs_init(struct ag71xx *ag) { return 0; } -static inline void ag71xx_debugfs_exit(struct ag71xx *ag) {} -static inline void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, - u32 status) {} -static inline void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, - int rx, int tx) {} -#endif /* CONFIG_AG71XX_DEBUG_FS */ - -void ag71xx_ar7240_start(struct ag71xx *ag); -void ag71xx_ar7240_stop(struct ag71xx *ag); -int ag71xx_ar7240_init(struct ag71xx *ag); -void ag71xx_ar7240_cleanup(struct ag71xx *ag); - -int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg); -void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val); - -u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr, - unsigned reg_addr); -int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr, - unsigned reg_addr, u16 reg_val); - -#endif /* _AG71XX_H */ diff --git a/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx_ar7240.c b/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx_ar7240.c deleted file mode 100644 index ab7abd9e5c..0000000000 --- a/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx_ar7240.c +++ /dev/null @@ -1,1194 +0,0 @@ -/* - * Driver for the built-in ethernet switch of the Atheros AR7240 SoC - * Copyright (c) 2010 Gabor Juhos - * Copyright (c) 2010 Felix Fietkau - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include "ag71xx.h" - -#define BITM(_count) (BIT(_count) - 1) -#define BITS(_shift, _count) (BITM(_count) << _shift) - -#define AR7240_REG_MASK_CTRL 0x00 -#define AR7240_MASK_CTRL_REVISION_M BITM(8) -#define AR7240_MASK_CTRL_VERSION_M BITM(8) -#define AR7240_MASK_CTRL_VERSION_S 8 -#define AR7240_MASK_CTRL_VERSION_AR7240 0x01 -#define AR7240_MASK_CTRL_VERSION_AR934X 0x02 -#define AR7240_MASK_CTRL_SOFT_RESET BIT(31) - -#define AR7240_REG_MAC_ADDR0 0x20 -#define AR7240_REG_MAC_ADDR1 0x24 - -#define AR7240_REG_FLOOD_MASK 0x2c -#define AR7240_FLOOD_MASK_BROAD_TO_CPU BIT(26) - -#define AR7240_REG_GLOBAL_CTRL 0x30 -#define AR7240_GLOBAL_CTRL_MTU_M BITM(12) - -#define AR7240_REG_VTU 0x0040 -#define AR7240_VTU_OP BITM(3) -#define AR7240_VTU_OP_NOOP 0x0 -#define AR7240_VTU_OP_FLUSH 0x1 -#define AR7240_VTU_OP_LOAD 0x2 -#define AR7240_VTU_OP_PURGE 0x3 -#define AR7240_VTU_OP_REMOVE_PORT 0x4 -#define AR7240_VTU_ACTIVE BIT(3) -#define AR7240_VTU_FULL BIT(4) -#define AR7240_VTU_PORT BITS(8, 4) -#define AR7240_VTU_PORT_S 8 -#define AR7240_VTU_VID BITS(16, 12) -#define AR7240_VTU_VID_S 16 -#define AR7240_VTU_PRIO BITS(28, 3) -#define AR7240_VTU_PRIO_S 28 -#define AR7240_VTU_PRIO_EN BIT(31) - -#define AR7240_REG_VTU_DATA 0x0044 -#define AR7240_VTUDATA_MEMBER BITS(0, 10) -#define AR7240_VTUDATA_VALID BIT(11) - -#define AR7240_REG_ATU 0x50 -#define AR7240_ATU_FLUSH_ALL 0x1 - -#define AR7240_REG_AT_CTRL 0x5c -#define AR7240_AT_CTRL_AGE_TIME BITS(0, 15) -#define AR7240_AT_CTRL_AGE_EN BIT(17) -#define AR7240_AT_CTRL_LEARN_CHANGE BIT(18) -#define AR7240_AT_CTRL_RESERVED BIT(19) -#define AR7240_AT_CTRL_ARP_EN BIT(20) - -#define AR7240_REG_TAG_PRIORITY 0x70 - -#define AR7240_REG_SERVICE_TAG 0x74 -#define AR7240_SERVICE_TAG_M BITM(16) - -#define AR7240_REG_CPU_PORT 0x78 -#define AR7240_MIRROR_PORT_S 4 -#define AR7240_CPU_PORT_EN BIT(8) - -#define AR7240_REG_MIB_FUNCTION0 0x80 -#define AR7240_MIB_TIMER_M BITM(16) -#define AR7240_MIB_AT_HALF_EN BIT(16) -#define AR7240_MIB_BUSY BIT(17) -#define AR7240_MIB_FUNC_S 24 -#define AR7240_MIB_FUNC_NO_OP 0x0 -#define AR7240_MIB_FUNC_FLUSH 0x1 -#define AR7240_MIB_FUNC_CAPTURE 0x3 - -#define AR7240_REG_MDIO_CTRL 0x98 -#define AR7240_MDIO_CTRL_DATA_M BITM(16) -#define AR7240_MDIO_CTRL_REG_ADDR_S 16 -#define AR7240_MDIO_CTRL_PHY_ADDR_S 21 -#define AR7240_MDIO_CTRL_CMD_WRITE 0 -#define AR7240_MDIO_CTRL_CMD_READ BIT(27) -#define AR7240_MDIO_CTRL_MASTER_EN BIT(30) -#define AR7240_MDIO_CTRL_BUSY BIT(31) - -#define AR7240_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100) - -#define AR7240_REG_PORT_STATUS(_port) (AR7240_REG_PORT_BASE((_port)) + 0x00) -#define AR7240_PORT_STATUS_SPEED_S 0 -#define AR7240_PORT_STATUS_SPEED_M BITM(2) -#define AR7240_PORT_STATUS_SPEED_10 0 -#define AR7240_PORT_STATUS_SPEED_100 1 -#define AR7240_PORT_STATUS_SPEED_1000 2 -#define AR7240_PORT_STATUS_TXMAC BIT(2) -#define AR7240_PORT_STATUS_RXMAC BIT(3) -#define AR7240_PORT_STATUS_TXFLOW BIT(4) -#define AR7240_PORT_STATUS_RXFLOW BIT(5) -#define AR7240_PORT_STATUS_DUPLEX BIT(6) -#define AR7240_PORT_STATUS_LINK_UP BIT(8) -#define AR7240_PORT_STATUS_LINK_AUTO BIT(9) -#define AR7240_PORT_STATUS_LINK_PAUSE BIT(10) - -#define AR7240_REG_PORT_CTRL(_port) (AR7240_REG_PORT_BASE((_port)) + 0x04) -#define AR7240_PORT_CTRL_STATE_M BITM(3) -#define AR7240_PORT_CTRL_STATE_DISABLED 0 -#define AR7240_PORT_CTRL_STATE_BLOCK 1 -#define AR7240_PORT_CTRL_STATE_LISTEN 2 -#define AR7240_PORT_CTRL_STATE_LEARN 3 -#define AR7240_PORT_CTRL_STATE_FORWARD 4 -#define AR7240_PORT_CTRL_LEARN_LOCK BIT(7) -#define AR7240_PORT_CTRL_VLAN_MODE_S 8 -#define AR7240_PORT_CTRL_VLAN_MODE_KEEP 0 -#define AR7240_PORT_CTRL_VLAN_MODE_STRIP 1 -#define AR7240_PORT_CTRL_VLAN_MODE_ADD 2 -#define AR7240_PORT_CTRL_VLAN_MODE_DOUBLE_TAG 3 -#define AR7240_PORT_CTRL_IGMP_SNOOP BIT(10) -#define AR7240_PORT_CTRL_HEADER BIT(11) -#define AR7240_PORT_CTRL_MAC_LOOP BIT(12) -#define AR7240_PORT_CTRL_SINGLE_VLAN BIT(13) -#define AR7240_PORT_CTRL_LEARN BIT(14) -#define AR7240_PORT_CTRL_DOUBLE_TAG BIT(15) -#define AR7240_PORT_CTRL_MIRROR_TX BIT(16) -#define AR7240_PORT_CTRL_MIRROR_RX BIT(17) - -#define AR7240_REG_PORT_VLAN(_port) (AR7240_REG_PORT_BASE((_port)) + 0x08) - -#define AR7240_PORT_VLAN_DEFAULT_ID_S 0 -#define AR7240_PORT_VLAN_DEST_PORTS_S 16 -#define AR7240_PORT_VLAN_MODE_S 30 -#define AR7240_PORT_VLAN_MODE_PORT_ONLY 0 -#define AR7240_PORT_VLAN_MODE_PORT_FALLBACK 1 -#define AR7240_PORT_VLAN_MODE_VLAN_ONLY 2 -#define AR7240_PORT_VLAN_MODE_SECURE 3 - - -#define AR7240_REG_STATS_BASE(_port) (0x20000 + (_port) * 0x100) - -#define AR7240_STATS_RXBROAD 0x00 -#define AR7240_STATS_RXPAUSE 0x04 -#define AR7240_STATS_RXMULTI 0x08 -#define AR7240_STATS_RXFCSERR 0x0c -#define AR7240_STATS_RXALIGNERR 0x10 -#define AR7240_STATS_RXRUNT 0x14 -#define AR7240_STATS_RXFRAGMENT 0x18 -#define AR7240_STATS_RX64BYTE 0x1c -#define AR7240_STATS_RX128BYTE 0x20 -#define AR7240_STATS_RX256BYTE 0x24 -#define AR7240_STATS_RX512BYTE 0x28 -#define AR7240_STATS_RX1024BYTE 0x2c -#define AR7240_STATS_RX1518BYTE 0x30 -#define AR7240_STATS_RXMAXBYTE 0x34 -#define AR7240_STATS_RXTOOLONG 0x38 -#define AR7240_STATS_RXGOODBYTE 0x3c -#define AR7240_STATS_RXBADBYTE 0x44 -#define AR7240_STATS_RXOVERFLOW 0x4c -#define AR7240_STATS_FILTERED 0x50 -#define AR7240_STATS_TXBROAD 0x54 -#define AR7240_STATS_TXPAUSE 0x58 -#define AR7240_STATS_TXMULTI 0x5c -#define AR7240_STATS_TXUNDERRUN 0x60 -#define AR7240_STATS_TX64BYTE 0x64 -#define AR7240_STATS_TX128BYTE 0x68 -#define AR7240_STATS_TX256BYTE 0x6c -#define AR7240_STATS_TX512BYTE 0x70 -#define AR7240_STATS_TX1024BYTE 0x74 -#define AR7240_STATS_TX1518BYTE 0x78 -#define AR7240_STATS_TXMAXBYTE 0x7c -#define AR7240_STATS_TXOVERSIZE 0x80 -#define AR7240_STATS_TXBYTE 0x84 -#define AR7240_STATS_TXCOLLISION 0x8c -#define AR7240_STATS_TXABORTCOL 0x90 -#define AR7240_STATS_TXMULTICOL 0x94 -#define AR7240_STATS_TXSINGLECOL 0x98 -#define AR7240_STATS_TXEXCDEFER 0x9c -#define AR7240_STATS_TXDEFER 0xa0 -#define AR7240_STATS_TXLATECOL 0xa4 - -#define AR7240_PORT_CPU 0 -#define AR7240_NUM_PORTS 6 -#define AR7240_NUM_PHYS 5 - -#define AR7240_PHY_ID1 0x004d -#define AR7240_PHY_ID2 0xd041 - -#define AR934X_PHY_ID1 0x004d -#define AR934X_PHY_ID2 0xd042 - -#define AR7240_MAX_VLANS 16 - -#define AR934X_REG_OPER_MODE0 0x04 -#define AR934X_OPER_MODE0_MAC_GMII_EN BIT(6) -#define AR934X_OPER_MODE0_PHY_MII_EN BIT(10) - -#define AR934X_REG_OPER_MODE1 0x08 -#define AR934X_REG_OPER_MODE1_PHY4_MII_EN BIT(28) - -#define AR934X_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100) - -#define AR934X_REG_PORT_VLAN1(_port) (AR934X_REG_PORT_BASE((_port)) + 0x08) -#define AR934X_PORT_VLAN1_DEFAULT_SVID_S 0 -#define AR934X_PORT_VLAN1_FORCE_DEFAULT_VID_EN BIT(12) -#define AR934X_PORT_VLAN1_PORT_TLS_MODE BIT(13) -#define AR934X_PORT_VLAN1_PORT_VLAN_PROP_EN BIT(14) -#define AR934X_PORT_VLAN1_PORT_CLONE_EN BIT(15) -#define AR934X_PORT_VLAN1_DEFAULT_CVID_S 16 -#define AR934X_PORT_VLAN1_FORCE_PORT_VLAN_EN BIT(28) -#define AR934X_PORT_VLAN1_ING_PORT_PRI_S 29 - -#define AR934X_REG_PORT_VLAN2(_port) (AR934X_REG_PORT_BASE((_port)) + 0x0c) -#define AR934X_PORT_VLAN2_PORT_VID_MEM_S 16 -#define AR934X_PORT_VLAN2_8021Q_MODE_S 30 -#define AR934X_PORT_VLAN2_8021Q_MODE_PORT_ONLY 0 -#define AR934X_PORT_VLAN2_8021Q_MODE_PORT_FALLBACK 1 -#define AR934X_PORT_VLAN2_8021Q_MODE_VLAN_ONLY 2 -#define AR934X_PORT_VLAN2_8021Q_MODE_SECURE 3 - -#define sw_to_ar7240(_dev) container_of(_dev, struct ar7240sw, swdev) - -struct ar7240sw_port_stat { - unsigned long rx_broadcast; - unsigned long rx_pause; - unsigned long rx_multicast; - unsigned long rx_fcs_error; - unsigned long rx_align_error; - unsigned long rx_runt; - unsigned long rx_fragments; - unsigned long rx_64byte; - unsigned long rx_128byte; - unsigned long rx_256byte; - unsigned long rx_512byte; - unsigned long rx_1024byte; - unsigned long rx_1518byte; - unsigned long rx_maxbyte; - unsigned long rx_toolong; - unsigned long rx_good_byte; - unsigned long rx_bad_byte; - unsigned long rx_overflow; - unsigned long filtered; - - unsigned long tx_broadcast; - unsigned long tx_pause; - unsigned long tx_multicast; - unsigned long tx_underrun; - unsigned long tx_64byte; - unsigned long tx_128byte; - unsigned long tx_256byte; - unsigned long tx_512byte; - unsigned long tx_1024byte; - unsigned long tx_1518byte; - unsigned long tx_maxbyte; - unsigned long tx_oversize; - unsigned long tx_byte; - unsigned long tx_collision; - unsigned long tx_abortcol; - unsigned long tx_multicol; - unsigned long tx_singlecol; - unsigned long tx_excdefer; - unsigned long tx_defer; - unsigned long tx_xlatecol; -}; - -struct ar7240sw { - struct mii_bus *mii_bus; - struct ag71xx_switch_platform_data *swdata; - struct switch_dev swdev; - int num_ports; - u8 ver; - bool vlan; - u16 vlan_id[AR7240_MAX_VLANS]; - u8 vlan_table[AR7240_MAX_VLANS]; - u8 vlan_tagged; - u16 pvid[AR7240_NUM_PORTS]; - char buf[80]; - - rwlock_t stats_lock; - struct ar7240sw_port_stat port_stats[AR7240_NUM_PORTS]; -}; - -struct ar7240sw_hw_stat { - char string[ETH_GSTRING_LEN]; - int sizeof_stat; - int reg; -}; - -static DEFINE_MUTEX(reg_mutex); - -static inline int sw_is_ar7240(struct ar7240sw *as) -{ - return as->ver == AR7240_MASK_CTRL_VERSION_AR7240; -} - -static inline int sw_is_ar934x(struct ar7240sw *as) -{ - return as->ver == AR7240_MASK_CTRL_VERSION_AR934X; -} - -static inline u32 ar7240sw_port_mask(struct ar7240sw *as, int port) -{ - return BIT(port); -} - -static inline u32 ar7240sw_port_mask_all(struct ar7240sw *as) -{ - return BIT(as->swdev.ports) - 1; -} - -static inline u32 ar7240sw_port_mask_but(struct ar7240sw *as, int port) -{ - return ar7240sw_port_mask_all(as) & ~BIT(port); -} - -static inline u16 mk_phy_addr(u32 reg) -{ - return 0x17 & ((reg >> 4) | 0x10); -} - -static inline u16 mk_phy_reg(u32 reg) -{ - return (reg << 1) & 0x1e; -} - -static inline u16 mk_high_addr(u32 reg) -{ - return (reg >> 7) & 0x1ff; -} - -static u32 __ar7240sw_reg_read(struct mii_bus *mii, u32 reg) -{ - unsigned long flags; - u16 phy_addr; - u16 phy_reg; - u32 hi, lo; - - reg = (reg & 0xfffffffc) >> 2; - phy_addr = mk_phy_addr(reg); - phy_reg = mk_phy_reg(reg); - - local_irq_save(flags); - ag71xx_mdio_mii_write(mii->priv, 0x1f, 0x10, mk_high_addr(reg)); - lo = (u32) ag71xx_mdio_mii_read(mii->priv, phy_addr, phy_reg); - hi = (u32) ag71xx_mdio_mii_read(mii->priv, phy_addr, phy_reg + 1); - local_irq_restore(flags); - - return (hi << 16) | lo; -} - -static void __ar7240sw_reg_write(struct mii_bus *mii, u32 reg, u32 val) -{ - unsigned long flags; - u16 phy_addr; - u16 phy_reg; - - reg = (reg & 0xfffffffc) >> 2; - phy_addr = mk_phy_addr(reg); - phy_reg = mk_phy_reg(reg); - - local_irq_save(flags); - ag71xx_mdio_mii_write(mii->priv, 0x1f, 0x10, mk_high_addr(reg)); - ag71xx_mdio_mii_write(mii->priv, phy_addr, phy_reg + 1, (val >> 16)); - ag71xx_mdio_mii_write(mii->priv, phy_addr, phy_reg, (val & 0xffff)); - local_irq_restore(flags); -} - -static u32 ar7240sw_reg_read(struct mii_bus *mii, u32 reg_addr) -{ - u32 ret; - - mutex_lock(®_mutex); - ret = __ar7240sw_reg_read(mii, reg_addr); - mutex_unlock(®_mutex); - - return ret; -} - -static void ar7240sw_reg_write(struct mii_bus *mii, u32 reg_addr, u32 reg_val) -{ - mutex_lock(®_mutex); - __ar7240sw_reg_write(mii, reg_addr, reg_val); - mutex_unlock(®_mutex); -} - -static u32 ar7240sw_reg_rmw(struct mii_bus *mii, u32 reg, u32 mask, u32 val) -{ - u32 t; - - mutex_lock(®_mutex); - t = __ar7240sw_reg_read(mii, reg); - t &= ~mask; - t |= val; - __ar7240sw_reg_write(mii, reg, t); - mutex_unlock(®_mutex); - - return t; -} - -static void ar7240sw_reg_set(struct mii_bus *mii, u32 reg, u32 val) -{ - u32 t; - - mutex_lock(®_mutex); - t = __ar7240sw_reg_read(mii, reg); - t |= val; - __ar7240sw_reg_write(mii, reg, t); - mutex_unlock(®_mutex); -} - -static int __ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val, - unsigned timeout) -{ - int i; - - for (i = 0; i < timeout; i++) { - u32 t; - - t = __ar7240sw_reg_read(mii, reg); - if ((t & mask) == val) - return 0; - - msleep(1); - } - - return -ETIMEDOUT; -} - -static int ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val, - unsigned timeout) -{ - int ret; - - mutex_lock(®_mutex); - ret = __ar7240sw_reg_wait(mii, reg, mask, val, timeout); - mutex_unlock(®_mutex); - return ret; -} - -u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr, - unsigned reg_addr) -{ - u32 t, val = 0xffff; - int err; - - if (phy_addr >= AR7240_NUM_PHYS) - return 0xffff; - - mutex_lock(®_mutex); - t = (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) | - (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) | - AR7240_MDIO_CTRL_MASTER_EN | - AR7240_MDIO_CTRL_BUSY | - AR7240_MDIO_CTRL_CMD_READ; - - __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t); - err = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL, - AR7240_MDIO_CTRL_BUSY, 0, 5); - if (!err) - val = __ar7240sw_reg_read(mii, AR7240_REG_MDIO_CTRL); - mutex_unlock(®_mutex); - - return val & AR7240_MDIO_CTRL_DATA_M; -} - -int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr, - unsigned reg_addr, u16 reg_val) -{ - u32 t; - int ret; - - if (phy_addr >= AR7240_NUM_PHYS) - return -EINVAL; - - mutex_lock(®_mutex); - t = (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) | - (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) | - AR7240_MDIO_CTRL_MASTER_EN | - AR7240_MDIO_CTRL_BUSY | - AR7240_MDIO_CTRL_CMD_WRITE | - reg_val; - - __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t); - ret = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL, - AR7240_MDIO_CTRL_BUSY, 0, 5); - mutex_unlock(®_mutex); - - return ret; -} - -static int ar7240sw_capture_stats(struct ar7240sw *as) -{ - struct mii_bus *mii = as->mii_bus; - int port; - int ret; - - write_lock(&as->stats_lock); - - /* Capture the hardware statistics for all ports */ - ar7240sw_reg_write(mii, AR7240_REG_MIB_FUNCTION0, - (AR7240_MIB_FUNC_CAPTURE << AR7240_MIB_FUNC_S)); - - /* Wait for the capturing to complete. */ - ret = ar7240sw_reg_wait(mii, AR7240_REG_MIB_FUNCTION0, - AR7240_MIB_BUSY, 0, 10); - - if (ret) - goto unlock; - - for (port = 0; port < AR7240_NUM_PORTS; port++) { - unsigned int base; - struct ar7240sw_port_stat *stats; - - base = AR7240_REG_STATS_BASE(port); - stats = &as->port_stats[port]; - -#define READ_STAT(_r) ar7240sw_reg_read(mii, base + AR7240_STATS_ ## _r) - - stats->rx_good_byte += READ_STAT(RXGOODBYTE); - stats->tx_byte += READ_STAT(TXBYTE); - -#undef READ_STAT - } - - ret = 0; - -unlock: - write_unlock(&as->stats_lock); - return ret; -} - -static void ar7240sw_disable_port(struct ar7240sw *as, unsigned port) -{ - ar7240sw_reg_write(as->mii_bus, AR7240_REG_PORT_CTRL(port), - AR7240_PORT_CTRL_STATE_DISABLED); -} - -static void ar7240sw_setup(struct ar7240sw *as) -{ - struct mii_bus *mii = as->mii_bus; - - /* Enable CPU port, and disable mirror port */ - ar7240sw_reg_write(mii, AR7240_REG_CPU_PORT, - AR7240_CPU_PORT_EN | - (15 << AR7240_MIRROR_PORT_S)); - - /* Setup TAG priority mapping */ - ar7240sw_reg_write(mii, AR7240_REG_TAG_PRIORITY, 0xfa50); - - /* Enable ARP frame acknowledge, aging, MAC replacing */ - ar7240sw_reg_write(mii, AR7240_REG_AT_CTRL, - AR7240_AT_CTRL_RESERVED | - 0x2b /* 5 min age time */ | - AR7240_AT_CTRL_AGE_EN | - AR7240_AT_CTRL_ARP_EN | - AR7240_AT_CTRL_LEARN_CHANGE); - - /* Enable Broadcast frames transmitted to the CPU */ - ar7240sw_reg_set(mii, AR7240_REG_FLOOD_MASK, - AR7240_FLOOD_MASK_BROAD_TO_CPU); - - /* setup MTU */ - ar7240sw_reg_rmw(mii, AR7240_REG_GLOBAL_CTRL, AR7240_GLOBAL_CTRL_MTU_M, - 1536); - - /* setup Service TAG */ - ar7240sw_reg_rmw(mii, AR7240_REG_SERVICE_TAG, AR7240_SERVICE_TAG_M, 0); -} - -static int ar7240sw_reset(struct ar7240sw *as) -{ - struct mii_bus *mii = as->mii_bus; - int ret; - int i; - - /* Set all ports to disabled state. */ - for (i = 0; i < AR7240_NUM_PORTS; i++) - ar7240sw_disable_port(as, i); - - /* Wait for transmit queues to drain. */ - msleep(2); - - /* Reset the switch. */ - ar7240sw_reg_write(mii, AR7240_REG_MASK_CTRL, - AR7240_MASK_CTRL_SOFT_RESET); - - ret = ar7240sw_reg_wait(mii, AR7240_REG_MASK_CTRL, - AR7240_MASK_CTRL_SOFT_RESET, 0, 1000); - - ar7240sw_setup(as); - return ret; -} - -static void ar7240sw_setup_port(struct ar7240sw *as, unsigned port, u8 portmask) -{ - struct mii_bus *mii = as->mii_bus; - u32 ctrl; - u32 vid, mode; - - ctrl = AR7240_PORT_CTRL_STATE_FORWARD | AR7240_PORT_CTRL_LEARN | - AR7240_PORT_CTRL_SINGLE_VLAN; - - if (port == AR7240_PORT_CPU) { - ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port), - AR7240_PORT_STATUS_SPEED_1000 | - AR7240_PORT_STATUS_TXFLOW | - AR7240_PORT_STATUS_RXFLOW | - AR7240_PORT_STATUS_TXMAC | - AR7240_PORT_STATUS_RXMAC | - AR7240_PORT_STATUS_DUPLEX); - } else { - ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port), - AR7240_PORT_STATUS_LINK_AUTO); - } - - /* Set the default VID for this port */ - if (as->vlan) { - vid = as->vlan_id[as->pvid[port]]; - mode = AR7240_PORT_VLAN_MODE_SECURE; - } else { - vid = port; - mode = AR7240_PORT_VLAN_MODE_PORT_ONLY; - } - - if (as->vlan && (as->vlan_tagged & BIT(port))) { - ctrl |= AR7240_PORT_CTRL_VLAN_MODE_ADD << - AR7240_PORT_CTRL_VLAN_MODE_S; - } else { - ctrl |= AR7240_PORT_CTRL_VLAN_MODE_STRIP << - AR7240_PORT_CTRL_VLAN_MODE_S; - } - - if (!portmask) { - if (port == AR7240_PORT_CPU) - portmask = ar7240sw_port_mask_but(as, AR7240_PORT_CPU); - else - portmask = ar7240sw_port_mask(as, AR7240_PORT_CPU); - } - - /* allow the port to talk to all other ports, but exclude its - * own ID to prevent frames from being reflected back to the - * port that they came from */ - portmask &= ar7240sw_port_mask_but(as, port); - - ar7240sw_reg_write(mii, AR7240_REG_PORT_CTRL(port), ctrl); - if (sw_is_ar934x(as)) { - u32 vlan1, vlan2; - - vlan1 = (vid << AR934X_PORT_VLAN1_DEFAULT_CVID_S); - vlan2 = (portmask << AR934X_PORT_VLAN2_PORT_VID_MEM_S) | - (mode << AR934X_PORT_VLAN2_8021Q_MODE_S); - ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN1(port), vlan1); - ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN2(port), vlan2); - } else { - u32 vlan; - - vlan = vid | (mode << AR7240_PORT_VLAN_MODE_S) | - (portmask << AR7240_PORT_VLAN_DEST_PORTS_S); - - ar7240sw_reg_write(mii, AR7240_REG_PORT_VLAN(port), vlan); - } -} - -static int ar7240_set_addr(struct ar7240sw *as, u8 *addr) -{ - struct mii_bus *mii = as->mii_bus; - u32 t; - - t = (addr[4] << 8) | addr[5]; - ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR0, t); - - t = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3]; - ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR1, t); - - return 0; -} - -static int -ar7240_set_vid(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - as->vlan_id[val->port_vlan] = val->value.i; - return 0; -} - -static int -ar7240_get_vid(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - val->value.i = as->vlan_id[val->port_vlan]; - return 0; -} - -static int -ar7240_set_pvid(struct switch_dev *dev, int port, int vlan) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - - /* make sure no invalid PVIDs get set */ - - if (vlan >= dev->vlans) - return -EINVAL; - - as->pvid[port] = vlan; - return 0; -} - -static int -ar7240_get_pvid(struct switch_dev *dev, int port, int *vlan) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - *vlan = as->pvid[port]; - return 0; -} - -static int -ar7240_get_ports(struct switch_dev *dev, struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - u8 ports = as->vlan_table[val->port_vlan]; - int i; - - val->len = 0; - for (i = 0; i < as->swdev.ports; i++) { - struct switch_port *p; - - if (!(ports & (1 << i))) - continue; - - p = &val->value.ports[val->len++]; - p->id = i; - if (as->vlan_tagged & (1 << i)) - p->flags = (1 << SWITCH_PORT_FLAG_TAGGED); - else - p->flags = 0; - } - return 0; -} - -static int -ar7240_set_ports(struct switch_dev *dev, struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - u8 *vt = &as->vlan_table[val->port_vlan]; - int i, j; - - *vt = 0; - for (i = 0; i < val->len; i++) { - struct switch_port *p = &val->value.ports[i]; - - if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) - as->vlan_tagged |= (1 << p->id); - else { - as->vlan_tagged &= ~(1 << p->id); - as->pvid[p->id] = val->port_vlan; - - /* make sure that an untagged port does not - * appear in other vlans */ - for (j = 0; j < AR7240_MAX_VLANS; j++) { - if (j == val->port_vlan) - continue; - as->vlan_table[j] &= ~(1 << p->id); - } - } - - *vt |= 1 << p->id; - } - return 0; -} - -static int -ar7240_set_vlan(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - as->vlan = !!val->value.i; - return 0; -} - -static int -ar7240_get_vlan(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - val->value.i = as->vlan; - return 0; -} - -static const char * -ar7240_speed_str(u32 status) -{ - u32 speed; - - speed = (status >> AR7240_PORT_STATUS_SPEED_S) & - AR7240_PORT_STATUS_SPEED_M; - switch (speed) { - case AR7240_PORT_STATUS_SPEED_10: - return "10baseT"; - case AR7240_PORT_STATUS_SPEED_100: - return "100baseT"; - case AR7240_PORT_STATUS_SPEED_1000: - return "1000baseT"; - } - - return "unknown"; -} - -static int -ar7240_port_get_link(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - struct mii_bus *mii = as->mii_bus; - u32 len; - u32 status; - int port; - - port = val->port_vlan; - - memset(as->buf, '\0', sizeof(as->buf)); - status = ar7240sw_reg_read(mii, AR7240_REG_PORT_STATUS(port)); - - if (status & AR7240_PORT_STATUS_LINK_UP) { - len = snprintf(as->buf, sizeof(as->buf), - "port:%d link:up speed:%s %s-duplex %s%s%s", - port, - ar7240_speed_str(status), - (status & AR7240_PORT_STATUS_DUPLEX) ? - "full" : "half", - (status & AR7240_PORT_STATUS_TXFLOW) ? - "txflow ": "", - (status & AR7240_PORT_STATUS_RXFLOW) ? - "rxflow " : "", - (status & AR7240_PORT_STATUS_LINK_AUTO) ? - "auto ": ""); - } else { - len = snprintf(as->buf, sizeof(as->buf), - "port:%d link:down", port); - } - - val->value.s = as->buf; - val->len = len; - - return 0; -} - -static void -ar7240_vtu_op(struct ar7240sw *as, u32 op, u32 val) -{ - struct mii_bus *mii = as->mii_bus; - - if (ar7240sw_reg_wait(mii, AR7240_REG_VTU, AR7240_VTU_ACTIVE, 0, 5)) - return; - - if ((op & AR7240_VTU_OP) == AR7240_VTU_OP_LOAD) { - val &= AR7240_VTUDATA_MEMBER; - val |= AR7240_VTUDATA_VALID; - ar7240sw_reg_write(mii, AR7240_REG_VTU_DATA, val); - } - op |= AR7240_VTU_ACTIVE; - ar7240sw_reg_write(mii, AR7240_REG_VTU, op); -} - -static int -ar7240_hw_apply(struct switch_dev *dev) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - u8 portmask[AR7240_NUM_PORTS]; - int i, j; - - /* flush all vlan translation unit entries */ - ar7240_vtu_op(as, AR7240_VTU_OP_FLUSH, 0); - - memset(portmask, 0, sizeof(portmask)); - if (as->vlan) { - /* calculate the port destination masks and load vlans - * into the vlan translation unit */ - for (j = 0; j < AR7240_MAX_VLANS; j++) { - u8 vp = as->vlan_table[j]; - - if (!vp) - continue; - - for (i = 0; i < as->swdev.ports; i++) { - u8 mask = (1 << i); - if (vp & mask) - portmask[i] |= vp & ~mask; - } - - ar7240_vtu_op(as, - AR7240_VTU_OP_LOAD | - (as->vlan_id[j] << AR7240_VTU_VID_S), - as->vlan_table[j]); - } - } else { - /* vlan disabled: - * isolate all ports, but connect them to the cpu port */ - for (i = 0; i < as->swdev.ports; i++) { - if (i == AR7240_PORT_CPU) - continue; - - portmask[i] = 1 << AR7240_PORT_CPU; - portmask[AR7240_PORT_CPU] |= (1 << i); - } - } - - /* update the port destination mask registers and tag settings */ - for (i = 0; i < as->swdev.ports; i++) - ar7240sw_setup_port(as, i, portmask[i]); - - return 0; -} - -static int -ar7240_reset_switch(struct switch_dev *dev) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - ar7240sw_reset(as); - return 0; -} - -static int -ar7240_get_port_link(struct switch_dev *dev, int port, - struct switch_port_link *link) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - struct mii_bus *mii = as->mii_bus; - u32 status; - - if (port > AR7240_NUM_PORTS) - return -EINVAL; - - status = ar7240sw_reg_read(mii, AR7240_REG_PORT_STATUS(port)); - - link->link = !!(status & AR7240_PORT_STATUS_LINK_UP); - link->aneg = !!(status & AR7240_PORT_STATUS_LINK_AUTO); - link->duplex = !!(status & AR7240_PORT_STATUS_DUPLEX); - link->tx_flow = !!(status & AR7240_PORT_STATUS_TXFLOW); - link->rx_flow = !!(status & AR7240_PORT_STATUS_RXFLOW); - switch (status & AR7240_PORT_STATUS_SPEED_M) { - case AR7240_PORT_STATUS_SPEED_10: - link->speed = SWITCH_PORT_SPEED_10; - break; - case AR7240_PORT_STATUS_SPEED_100: - link->speed = SWITCH_PORT_SPEED_100; - break; - case AR7240_PORT_STATUS_SPEED_1000: - link->speed = SWITCH_PORT_SPEED_1000; - break; - } - - return 0; -} - -static int -ar7240_get_port_stats(struct switch_dev *dev, int port, - struct switch_port_stats *stats) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - - if (port > AR7240_NUM_PORTS) - return -EINVAL; - - ar7240sw_capture_stats(as); - - read_lock(&as->stats_lock); - stats->rx_bytes = as->port_stats[port].rx_good_byte; - stats->tx_bytes = as->port_stats[port].tx_byte; - read_unlock(&as->stats_lock); - - return 0; -} - -static struct switch_attr ar7240_globals[] = { - { - .type = SWITCH_TYPE_INT, - .name = "enable_vlan", - .description = "Enable VLAN mode", - .set = ar7240_set_vlan, - .get = ar7240_get_vlan, - .max = 1 - }, -}; - -static struct switch_attr ar7240_port[] = { - { - .type = SWITCH_TYPE_STRING, - .name = "link", - .description = "Get port link information", - .max = 1, - .set = NULL, - .get = ar7240_port_get_link, - }, -}; - -static struct switch_attr ar7240_vlan[] = { - { - .type = SWITCH_TYPE_INT, - .name = "vid", - .description = "VLAN ID", - .set = ar7240_set_vid, - .get = ar7240_get_vid, - .max = 4094, - }, -}; - -static const struct switch_dev_ops ar7240_ops = { - .attr_global = { - .attr = ar7240_globals, - .n_attr = ARRAY_SIZE(ar7240_globals), - }, - .attr_port = { - .attr = ar7240_port, - .n_attr = ARRAY_SIZE(ar7240_port), - }, - .attr_vlan = { - .attr = ar7240_vlan, - .n_attr = ARRAY_SIZE(ar7240_vlan), - }, - .get_port_pvid = ar7240_get_pvid, - .set_port_pvid = ar7240_set_pvid, - .get_vlan_ports = ar7240_get_ports, - .set_vlan_ports = ar7240_set_ports, - .apply_config = ar7240_hw_apply, - .reset_switch = ar7240_reset_switch, - .get_port_link = ar7240_get_port_link, - .get_port_stats = ar7240_get_port_stats, -}; - -static struct ar7240sw *ar7240_probe(struct ag71xx *ag) -{ - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - struct mii_bus *mii = ag->mii_bus; - struct ar7240sw *as; - struct switch_dev *swdev; - u32 ctrl; - u16 phy_id1; - u16 phy_id2; - int i; - - phy_id1 = ar7240sw_phy_read(mii, 0, MII_PHYSID1); - phy_id2 = ar7240sw_phy_read(mii, 0, MII_PHYSID2); - if ((phy_id1 != AR7240_PHY_ID1 || phy_id2 != AR7240_PHY_ID2) && - (phy_id1 != AR934X_PHY_ID1 || phy_id2 != AR934X_PHY_ID2)) { - pr_err("%s: unknown phy id '%04x:%04x'\n", - ag->dev->name, phy_id1, phy_id2); - return NULL; - } - - as = kzalloc(sizeof(*as), GFP_KERNEL); - if (!as) - return NULL; - - as->mii_bus = mii; - as->swdata = pdata->switch_data; - - swdev = &as->swdev; - - ctrl = ar7240sw_reg_read(mii, AR7240_REG_MASK_CTRL); - as->ver = (ctrl >> AR7240_MASK_CTRL_VERSION_S) & - AR7240_MASK_CTRL_VERSION_M; - - if (sw_is_ar7240(as)) { - swdev->name = "AR7240/AR9330 built-in switch"; - } else if (sw_is_ar934x(as)) { - swdev->name = "AR934X built-in switch"; - - if (pdata->phy_if_mode == PHY_INTERFACE_MODE_GMII) { - ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0, - AR934X_OPER_MODE0_MAC_GMII_EN); - } else if (pdata->phy_if_mode == PHY_INTERFACE_MODE_MII) { - ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0, - AR934X_OPER_MODE0_PHY_MII_EN); - } else { - pr_err("%s: invalid PHY interface mode\n", - ag->dev->name); - goto err_free; - } - - if (as->swdata->phy4_mii_en) - ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE1, - AR934X_REG_OPER_MODE1_PHY4_MII_EN); - } else { - pr_err("%s: unsupported chip, ctrl=%08x\n", - ag->dev->name, ctrl); - goto err_free; - } - - swdev->ports = AR7240_NUM_PORTS - 1; - swdev->cpu_port = AR7240_PORT_CPU; - swdev->vlans = AR7240_MAX_VLANS; - swdev->ops = &ar7240_ops; - - if (register_switch(&as->swdev, ag->dev) < 0) - goto err_free; - - pr_info("%s: Found an %s\n", ag->dev->name, swdev->name); - - /* initialize defaults */ - for (i = 0; i < AR7240_MAX_VLANS; i++) - as->vlan_id[i] = i; - - as->vlan_table[0] = ar7240sw_port_mask_all(as); - - return as; - -err_free: - kfree(as); - return NULL; -} - -static void link_function(struct work_struct *work) { - struct ag71xx *ag = container_of(work, struct ag71xx, link_work.work); - unsigned long flags; - int i; - int status = 0; - - for (i = 0; i < 4; i++) { - int link = ar7240sw_phy_read(ag->mii_bus, i, MII_BMSR); - if(link & BMSR_LSTATUS) { - status = 1; - break; - } - } - - spin_lock_irqsave(&ag->lock, flags); - if(status != ag->link) { - ag->link = status; - ag71xx_link_adjust(ag); - } - spin_unlock_irqrestore(&ag->lock, flags); - - schedule_delayed_work(&ag->link_work, HZ / 2); -} - -void ag71xx_ar7240_start(struct ag71xx *ag) -{ - struct ar7240sw *as = ag->phy_priv; - - ar7240sw_reset(as); - - ag->speed = SPEED_1000; - ag->duplex = 1; - - ar7240_set_addr(as, ag->dev->dev_addr); - ar7240_hw_apply(&as->swdev); - - schedule_delayed_work(&ag->link_work, HZ / 10); -} - -void ag71xx_ar7240_stop(struct ag71xx *ag) -{ - cancel_delayed_work_sync(&ag->link_work); -} - -int __devinit ag71xx_ar7240_init(struct ag71xx *ag) -{ - struct ar7240sw *as; - - as = ar7240_probe(ag); - if (!as) - return -ENODEV; - - ag->phy_priv = as; - ar7240sw_reset(as); - - rwlock_init(&as->stats_lock); - INIT_DELAYED_WORK(&ag->link_work, link_function); - - return 0; -} - -void ag71xx_ar7240_cleanup(struct ag71xx *ag) -{ - struct ar7240sw *as = ag->phy_priv; - - if (!as) - return; - - unregister_switch(&as->swdev); - kfree(as); - ag->phy_priv = NULL; -} diff --git a/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx_ar8216.c b/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx_ar8216.c deleted file mode 100644 index 7ec43b7221..0000000000 --- a/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx_ar8216.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Atheros AR71xx built-in ethernet mac driver - * Special support for the Atheros ar8216 switch chip - * - * Copyright (C) 2009-2010 Gabor Juhos - * - * Based on Atheros' AG7100 driver - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include "ag71xx.h" - -#define AR8216_PACKET_TYPE_MASK 0xf -#define AR8216_PACKET_TYPE_NORMAL 0 - -#define AR8216_HEADER_LEN 2 - -void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb) -{ - skb_push(skb, AR8216_HEADER_LEN); - skb->data[0] = 0x10; - skb->data[1] = 0x80; -} - -int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb, - int pktlen) -{ - u8 type; - - type = skb->data[1] & AR8216_PACKET_TYPE_MASK; - switch (type) { - case AR8216_PACKET_TYPE_NORMAL: - break; - - default: - return -EINVAL; - } - - skb_pull(skb, AR8216_HEADER_LEN); - return 0; -} diff --git a/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx_debugfs.c b/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx_debugfs.c deleted file mode 100644 index 65f2be198f..0000000000 --- a/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx_debugfs.c +++ /dev/null @@ -1,280 +0,0 @@ -/* - * Atheros AR71xx built-in ethernet mac driver - * - * Copyright (C) 2008-2010 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Based on Atheros' AG7100 driver - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include - -#include "ag71xx.h" - -static struct dentry *ag71xx_debugfs_root; - -static int ag71xx_debugfs_generic_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - -void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status) -{ - if (status) - ag->debug.int_stats.total++; - if (status & AG71XX_INT_TX_PS) - ag->debug.int_stats.tx_ps++; - if (status & AG71XX_INT_TX_UR) - ag->debug.int_stats.tx_ur++; - if (status & AG71XX_INT_TX_BE) - ag->debug.int_stats.tx_be++; - if (status & AG71XX_INT_RX_PR) - ag->debug.int_stats.rx_pr++; - if (status & AG71XX_INT_RX_OF) - ag->debug.int_stats.rx_of++; - if (status & AG71XX_INT_RX_BE) - ag->debug.int_stats.rx_be++; -} - -static ssize_t read_file_int_stats(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ -#define PR_INT_STAT(_label, _field) \ - len += snprintf(buf + len, sizeof(buf) - len, \ - "%20s: %10lu\n", _label, ag->debug.int_stats._field); - - struct ag71xx *ag = file->private_data; - char buf[256]; - unsigned int len = 0; - - PR_INT_STAT("TX Packet Sent", tx_ps); - PR_INT_STAT("TX Underrun", tx_ur); - PR_INT_STAT("TX Bus Error", tx_be); - PR_INT_STAT("RX Packet Received", rx_pr); - PR_INT_STAT("RX Overflow", rx_of); - PR_INT_STAT("RX Bus Error", rx_be); - len += snprintf(buf + len, sizeof(buf) - len, "\n"); - PR_INT_STAT("Total", total); - - return simple_read_from_buffer(user_buf, count, ppos, buf, len); -#undef PR_INT_STAT -} - -static const struct file_operations ag71xx_fops_int_stats = { - .open = ag71xx_debugfs_generic_open, - .read = read_file_int_stats, - .owner = THIS_MODULE -}; - -void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx) -{ - struct ag71xx_napi_stats *stats = &ag->debug.napi_stats; - - if (rx) { - stats->rx_count++; - stats->rx_packets += rx; - if (rx <= AG71XX_NAPI_WEIGHT) - stats->rx[rx]++; - if (rx > stats->rx_packets_max) - stats->rx_packets_max = rx; - } - - if (tx) { - stats->tx_count++; - stats->tx_packets += tx; - if (tx <= AG71XX_NAPI_WEIGHT) - stats->tx[tx]++; - if (tx > stats->tx_packets_max) - stats->tx_packets_max = tx; - } -} - -static ssize_t read_file_napi_stats(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ag71xx *ag = file->private_data; - struct ag71xx_napi_stats *stats = &ag->debug.napi_stats; - char *buf; - unsigned int buflen; - unsigned int len = 0; - unsigned long rx_avg = 0; - unsigned long tx_avg = 0; - int ret; - int i; - - buflen = 2048; - buf = kmalloc(buflen, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - if (stats->rx_count) - rx_avg = stats->rx_packets / stats->rx_count; - - if (stats->tx_count) - tx_avg = stats->tx_packets / stats->tx_count; - - len += snprintf(buf + len, buflen - len, "%3s %10s %10s\n", - "len", "rx", "tx"); - - for (i = 1; i <= AG71XX_NAPI_WEIGHT; i++) - len += snprintf(buf + len, buflen - len, - "%3d: %10lu %10lu\n", - i, stats->rx[i], stats->tx[i]); - - len += snprintf(buf + len, buflen - len, "\n"); - - len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n", - "sum", stats->rx_count, stats->tx_count); - len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n", - "avg", rx_avg, tx_avg); - len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n", - "max", stats->rx_packets_max, stats->tx_packets_max); - len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n", - "pkt", stats->rx_packets, stats->tx_packets); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); - kfree(buf); - - return ret; -} - -static const struct file_operations ag71xx_fops_napi_stats = { - .open = ag71xx_debugfs_generic_open, - .read = read_file_napi_stats, - .owner = THIS_MODULE -}; - -#define DESC_PRINT_LEN 64 - -static ssize_t read_file_ring(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos, - struct ag71xx *ag, - struct ag71xx_ring *ring, - unsigned desc_reg) -{ - char *buf; - unsigned int buflen; - unsigned int len = 0; - unsigned long flags; - ssize_t ret; - int curr; - int dirty; - u32 desc_hw; - int i; - - buflen = (ring->size * DESC_PRINT_LEN); - buf = kmalloc(buflen, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - len += snprintf(buf + len, buflen - len, - "Idx ... %-8s %-8s %-8s %-8s . %-10s\n", - "desc", "next", "data", "ctrl", "timestamp"); - - spin_lock_irqsave(&ag->lock, flags); - - curr = (ring->curr % ring->size); - dirty = (ring->dirty % ring->size); - desc_hw = ag71xx_rr(ag, desc_reg); - for (i = 0; i < ring->size; i++) { - struct ag71xx_buf *ab = &ring->buf[i]; - u32 desc_dma = ((u32) ring->descs_dma) + i * ring->desc_size; - - len += snprintf(buf + len, buflen - len, - "%3d %c%c%c %08x %08x %08x %08x %c %10lu\n", - i, - (i == curr) ? 'C' : ' ', - (i == dirty) ? 'D' : ' ', - (desc_hw == desc_dma) ? 'H' : ' ', - desc_dma, - ab->desc->next, - ab->desc->data, - ab->desc->ctrl, - (ab->desc->ctrl & DESC_EMPTY) ? 'E' : '*', - ab->timestamp); - } - - spin_unlock_irqrestore(&ag->lock, flags); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); - kfree(buf); - - return ret; -} - -static ssize_t read_file_tx_ring(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ag71xx *ag = file->private_data; - - return read_file_ring(file, user_buf, count, ppos, ag, &ag->tx_ring, - AG71XX_REG_TX_DESC); -} - -static const struct file_operations ag71xx_fops_tx_ring = { - .open = ag71xx_debugfs_generic_open, - .read = read_file_tx_ring, - .owner = THIS_MODULE -}; - -static ssize_t read_file_rx_ring(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ag71xx *ag = file->private_data; - - return read_file_ring(file, user_buf, count, ppos, ag, &ag->rx_ring, - AG71XX_REG_RX_DESC); -} - -static const struct file_operations ag71xx_fops_rx_ring = { - .open = ag71xx_debugfs_generic_open, - .read = read_file_rx_ring, - .owner = THIS_MODULE -}; - -void ag71xx_debugfs_exit(struct ag71xx *ag) -{ - debugfs_remove_recursive(ag->debug.debugfs_dir); -} - -int ag71xx_debugfs_init(struct ag71xx *ag) -{ - ag->debug.debugfs_dir = debugfs_create_dir(ag->dev->name, - ag71xx_debugfs_root); - if (!ag->debug.debugfs_dir) - return -ENOMEM; - - debugfs_create_file("int_stats", S_IRUGO, ag->debug.debugfs_dir, - ag, &ag71xx_fops_int_stats); - debugfs_create_file("napi_stats", S_IRUGO, ag->debug.debugfs_dir, - ag, &ag71xx_fops_napi_stats); - debugfs_create_file("tx_ring", S_IRUGO, ag->debug.debugfs_dir, - ag, &ag71xx_fops_tx_ring); - debugfs_create_file("rx_ring", S_IRUGO, ag->debug.debugfs_dir, - ag, &ag71xx_fops_rx_ring); - - return 0; -} - -int ag71xx_debugfs_root_init(void) -{ - if (ag71xx_debugfs_root) - return -EBUSY; - - ag71xx_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL); - if (!ag71xx_debugfs_root) - return -ENOENT; - - return 0; -} - -void ag71xx_debugfs_root_exit(void) -{ - debugfs_remove(ag71xx_debugfs_root); - ag71xx_debugfs_root = NULL; -} diff --git a/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx_ethtool.c b/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx_ethtool.c deleted file mode 100644 index 498fbed1ff..0000000000 --- a/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx_ethtool.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * Atheros AR71xx built-in ethernet mac driver - * - * Copyright (C) 2008-2010 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Based on Atheros' AG7100 driver - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include "ag71xx.h" - -static int ag71xx_ethtool_get_settings(struct net_device *dev, - struct ethtool_cmd *cmd) -{ - struct ag71xx *ag = netdev_priv(dev); - struct phy_device *phydev = ag->phy_dev; - - if (!phydev) - return -ENODEV; - - return phy_ethtool_gset(phydev, cmd); -} - -static int ag71xx_ethtool_set_settings(struct net_device *dev, - struct ethtool_cmd *cmd) -{ - struct ag71xx *ag = netdev_priv(dev); - struct phy_device *phydev = ag->phy_dev; - - if (!phydev) - return -ENODEV; - - return phy_ethtool_sset(phydev, cmd); -} - -static void ag71xx_ethtool_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - struct ag71xx *ag = netdev_priv(dev); - - strcpy(info->driver, ag->pdev->dev.driver->name); - strcpy(info->version, AG71XX_DRV_VERSION); - strcpy(info->bus_info, dev_name(&ag->pdev->dev)); -} - -static u32 ag71xx_ethtool_get_msglevel(struct net_device *dev) -{ - struct ag71xx *ag = netdev_priv(dev); - - return ag->msg_enable; -} - -static void ag71xx_ethtool_set_msglevel(struct net_device *dev, u32 msg_level) -{ - struct ag71xx *ag = netdev_priv(dev); - - ag->msg_enable = msg_level; -} - -static void ag71xx_ethtool_get_ringparam(struct net_device *dev, - struct ethtool_ringparam *er) -{ - struct ag71xx *ag = netdev_priv(dev); - - er->tx_max_pending = AG71XX_TX_RING_SIZE_MAX; - er->rx_max_pending = AG71XX_RX_RING_SIZE_MAX; - er->rx_mini_max_pending = 0; - er->rx_jumbo_max_pending = 0; - - er->tx_pending = ag->tx_ring.size; - er->rx_pending = ag->rx_ring.size; - er->rx_mini_pending = 0; - er->rx_jumbo_pending = 0; -} - -static int ag71xx_ethtool_set_ringparam(struct net_device *dev, - struct ethtool_ringparam *er) -{ - struct ag71xx *ag = netdev_priv(dev); - unsigned tx_size; - unsigned rx_size; - int err; - - if (er->rx_mini_pending != 0|| - er->rx_jumbo_pending != 0 || - er->rx_pending == 0 || - er->tx_pending == 0) - return -EINVAL; - - tx_size = er->tx_pending < AG71XX_TX_RING_SIZE_MAX ? - er->tx_pending : AG71XX_TX_RING_SIZE_MAX; - - rx_size = er->rx_pending < AG71XX_RX_RING_SIZE_MAX ? - er->rx_pending : AG71XX_RX_RING_SIZE_MAX; - - if (netif_running(dev)) { - err = dev->netdev_ops->ndo_stop(dev); - if (err) - return err; - } - - ag->tx_ring.size = tx_size; - ag->rx_ring.size = rx_size; - - if (netif_running(dev)) - err = dev->netdev_ops->ndo_open(dev); - - return err; -} - -struct ethtool_ops ag71xx_ethtool_ops = { - .set_settings = ag71xx_ethtool_set_settings, - .get_settings = ag71xx_ethtool_get_settings, - .get_drvinfo = ag71xx_ethtool_get_drvinfo, - .get_msglevel = ag71xx_ethtool_get_msglevel, - .set_msglevel = ag71xx_ethtool_set_msglevel, - .get_ringparam = ag71xx_ethtool_get_ringparam, - .set_ringparam = ag71xx_ethtool_set_ringparam, - .get_link = ethtool_op_get_link, -}; diff --git a/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx_main.c b/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx_main.c deleted file mode 100644 index 3ebf4b171e..0000000000 --- a/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx_main.c +++ /dev/null @@ -1,1265 +0,0 @@ -/* - * Atheros AR71xx built-in ethernet mac driver - * - * Copyright (C) 2008-2010 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Based on Atheros' AG7100 driver - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include "ag71xx.h" - -#define AG71XX_DEFAULT_MSG_ENABLE \ - (NETIF_MSG_DRV \ - | NETIF_MSG_PROBE \ - | NETIF_MSG_LINK \ - | NETIF_MSG_TIMER \ - | NETIF_MSG_IFDOWN \ - | NETIF_MSG_IFUP \ - | NETIF_MSG_RX_ERR \ - | NETIF_MSG_TX_ERR) - -static int ag71xx_msg_level = -1; - -module_param_named(msg_level, ag71xx_msg_level, int, 0); -MODULE_PARM_DESC(msg_level, "Message level (-1=defaults,0=none,...,16=all)"); - -static void ag71xx_dump_dma_regs(struct ag71xx *ag) -{ - DBG("%s: dma_tx_ctrl=%08x, dma_tx_desc=%08x, dma_tx_status=%08x\n", - ag->dev->name, - ag71xx_rr(ag, AG71XX_REG_TX_CTRL), - ag71xx_rr(ag, AG71XX_REG_TX_DESC), - ag71xx_rr(ag, AG71XX_REG_TX_STATUS)); - - DBG("%s: dma_rx_ctrl=%08x, dma_rx_desc=%08x, dma_rx_status=%08x\n", - ag->dev->name, - ag71xx_rr(ag, AG71XX_REG_RX_CTRL), - ag71xx_rr(ag, AG71XX_REG_RX_DESC), - ag71xx_rr(ag, AG71XX_REG_RX_STATUS)); -} - -static void ag71xx_dump_regs(struct ag71xx *ag) -{ - DBG("%s: mac_cfg1=%08x, mac_cfg2=%08x, ipg=%08x, hdx=%08x, mfl=%08x\n", - ag->dev->name, - ag71xx_rr(ag, AG71XX_REG_MAC_CFG1), - ag71xx_rr(ag, AG71XX_REG_MAC_CFG2), - ag71xx_rr(ag, AG71XX_REG_MAC_IPG), - ag71xx_rr(ag, AG71XX_REG_MAC_HDX), - ag71xx_rr(ag, AG71XX_REG_MAC_MFL)); - DBG("%s: mac_ifctl=%08x, mac_addr1=%08x, mac_addr2=%08x\n", - ag->dev->name, - ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL), - ag71xx_rr(ag, AG71XX_REG_MAC_ADDR1), - ag71xx_rr(ag, AG71XX_REG_MAC_ADDR2)); - DBG("%s: fifo_cfg0=%08x, fifo_cfg1=%08x, fifo_cfg2=%08x\n", - ag->dev->name, - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0), - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1), - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2)); - DBG("%s: fifo_cfg3=%08x, fifo_cfg4=%08x, fifo_cfg5=%08x\n", - ag->dev->name, - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3), - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4), - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5)); -} - -static inline void ag71xx_dump_intr(struct ag71xx *ag, char *label, u32 intr) -{ - DBG("%s: %s intr=%08x %s%s%s%s%s%s\n", - ag->dev->name, label, intr, - (intr & AG71XX_INT_TX_PS) ? "TXPS " : "", - (intr & AG71XX_INT_TX_UR) ? "TXUR " : "", - (intr & AG71XX_INT_TX_BE) ? "TXBE " : "", - (intr & AG71XX_INT_RX_PR) ? "RXPR " : "", - (intr & AG71XX_INT_RX_OF) ? "RXOF " : "", - (intr & AG71XX_INT_RX_BE) ? "RXBE " : ""); -} - -static void ag71xx_ring_free(struct ag71xx_ring *ring) -{ - kfree(ring->buf); - - if (ring->descs_cpu) - dma_free_coherent(NULL, ring->size * ring->desc_size, - ring->descs_cpu, ring->descs_dma); -} - -static int ag71xx_ring_alloc(struct ag71xx_ring *ring) -{ - int err; - int i; - - ring->desc_size = sizeof(struct ag71xx_desc); - if (ring->desc_size % cache_line_size()) { - DBG("ag71xx: ring %p, desc size %u rounded to %u\n", - ring, ring->desc_size, - roundup(ring->desc_size, cache_line_size())); - ring->desc_size = roundup(ring->desc_size, cache_line_size()); - } - - ring->descs_cpu = dma_alloc_coherent(NULL, ring->size * ring->desc_size, - &ring->descs_dma, GFP_ATOMIC); - if (!ring->descs_cpu) { - err = -ENOMEM; - goto err; - } - - - ring->buf = kzalloc(ring->size * sizeof(*ring->buf), GFP_KERNEL); - if (!ring->buf) { - err = -ENOMEM; - goto err; - } - - for (i = 0; i < ring->size; i++) { - int idx = i * ring->desc_size; - ring->buf[i].desc = (struct ag71xx_desc *)&ring->descs_cpu[idx]; - DBG("ag71xx: ring %p, desc %d at %p\n", - ring, i, ring->buf[i].desc); - } - - return 0; - -err: - return err; -} - -static void ag71xx_ring_tx_clean(struct ag71xx *ag) -{ - struct ag71xx_ring *ring = &ag->tx_ring; - struct net_device *dev = ag->dev; - - while (ring->curr != ring->dirty) { - u32 i = ring->dirty % ring->size; - - if (!ag71xx_desc_empty(ring->buf[i].desc)) { - ring->buf[i].desc->ctrl = 0; - dev->stats.tx_errors++; - } - - if (ring->buf[i].skb) - dev_kfree_skb_any(ring->buf[i].skb); - - ring->buf[i].skb = NULL; - - ring->dirty++; - } - - /* flush descriptors */ - wmb(); - -} - -static void ag71xx_ring_tx_init(struct ag71xx *ag) -{ - struct ag71xx_ring *ring = &ag->tx_ring; - int i; - - for (i = 0; i < ring->size; i++) { - ring->buf[i].desc->next = (u32) (ring->descs_dma + - ring->desc_size * ((i + 1) % ring->size)); - - ring->buf[i].desc->ctrl = DESC_EMPTY; - ring->buf[i].skb = NULL; - } - - /* flush descriptors */ - wmb(); - - ring->curr = 0; - ring->dirty = 0; -} - -static void ag71xx_ring_rx_clean(struct ag71xx *ag) -{ - struct ag71xx_ring *ring = &ag->rx_ring; - int i; - - if (!ring->buf) - return; - - for (i = 0; i < ring->size; i++) - if (ring->buf[i].skb) { - dma_unmap_single(&ag->dev->dev, ring->buf[i].dma_addr, - AG71XX_RX_PKT_SIZE, DMA_FROM_DEVICE); - kfree_skb(ring->buf[i].skb); - } -} - -static int ag71xx_rx_reserve(struct ag71xx *ag) -{ - int reserve = 0; - - if (ag71xx_get_pdata(ag)->is_ar724x) { - if (!ag71xx_has_ar8216(ag)) - reserve = 2; - - if (ag->phy_dev) - reserve += 4 - (ag->phy_dev->pkt_align % 4); - - reserve %= 4; - } - - return reserve + AG71XX_RX_PKT_RESERVE; -} - - -static int ag71xx_ring_rx_init(struct ag71xx *ag) -{ - struct ag71xx_ring *ring = &ag->rx_ring; - unsigned int reserve = ag71xx_rx_reserve(ag); - unsigned int i; - int ret; - - ret = 0; - for (i = 0; i < ring->size; i++) { - ring->buf[i].desc->next = (u32) (ring->descs_dma + - ring->desc_size * ((i + 1) % ring->size)); - - DBG("ag71xx: RX desc at %p, next is %08x\n", - ring->buf[i].desc, - ring->buf[i].desc->next); - } - - for (i = 0; i < ring->size; i++) { - struct sk_buff *skb; - dma_addr_t dma_addr; - - skb = dev_alloc_skb(AG71XX_RX_PKT_SIZE + reserve); - if (!skb) { - ret = -ENOMEM; - break; - } - - skb->dev = ag->dev; - skb_reserve(skb, reserve); - - dma_addr = dma_map_single(&ag->dev->dev, skb->data, - AG71XX_RX_PKT_SIZE, - DMA_FROM_DEVICE); - ring->buf[i].skb = skb; - ring->buf[i].dma_addr = dma_addr; - ring->buf[i].desc->data = (u32) dma_addr; - ring->buf[i].desc->ctrl = DESC_EMPTY; - } - - /* flush descriptors */ - wmb(); - - ring->curr = 0; - ring->dirty = 0; - - return ret; -} - -static int ag71xx_ring_rx_refill(struct ag71xx *ag) -{ - struct ag71xx_ring *ring = &ag->rx_ring; - unsigned int reserve = ag71xx_rx_reserve(ag); - unsigned int count; - - count = 0; - for (; ring->curr - ring->dirty > 0; ring->dirty++) { - unsigned int i; - - i = ring->dirty % ring->size; - - if (ring->buf[i].skb == NULL) { - dma_addr_t dma_addr; - struct sk_buff *skb; - - skb = dev_alloc_skb(AG71XX_RX_PKT_SIZE + reserve); - if (skb == NULL) - break; - - skb_reserve(skb, reserve); - skb->dev = ag->dev; - - dma_addr = dma_map_single(&ag->dev->dev, skb->data, - AG71XX_RX_PKT_SIZE, - DMA_FROM_DEVICE); - - ring->buf[i].skb = skb; - ring->buf[i].dma_addr = dma_addr; - ring->buf[i].desc->data = (u32) dma_addr; - } - - ring->buf[i].desc->ctrl = DESC_EMPTY; - count++; - } - - /* flush descriptors */ - wmb(); - - DBG("%s: %u rx descriptors refilled\n", ag->dev->name, count); - - return count; -} - -static int ag71xx_rings_init(struct ag71xx *ag) -{ - int ret; - - ret = ag71xx_ring_alloc(&ag->tx_ring); - if (ret) - return ret; - - ag71xx_ring_tx_init(ag); - - ret = ag71xx_ring_alloc(&ag->rx_ring); - if (ret) - return ret; - - ret = ag71xx_ring_rx_init(ag); - return ret; -} - -static void ag71xx_rings_cleanup(struct ag71xx *ag) -{ - ag71xx_ring_rx_clean(ag); - ag71xx_ring_free(&ag->rx_ring); - - ag71xx_ring_tx_clean(ag); - ag71xx_ring_free(&ag->tx_ring); -} - -static unsigned char *ag71xx_speed_str(struct ag71xx *ag) -{ - switch (ag->speed) { - case SPEED_1000: - return "1000"; - case SPEED_100: - return "100"; - case SPEED_10: - return "10"; - } - - return "?"; -} - -static void ag71xx_hw_set_macaddr(struct ag71xx *ag, unsigned char *mac) -{ - u32 t; - - t = (((u32) mac[5]) << 24) | (((u32) mac[4]) << 16) - | (((u32) mac[3]) << 8) | ((u32) mac[2]); - - ag71xx_wr(ag, AG71XX_REG_MAC_ADDR1, t); - - t = (((u32) mac[1]) << 24) | (((u32) mac[0]) << 16); - ag71xx_wr(ag, AG71XX_REG_MAC_ADDR2, t); -} - -static void ag71xx_dma_reset(struct ag71xx *ag) -{ - u32 val; - int i; - - ag71xx_dump_dma_regs(ag); - - /* stop RX and TX */ - ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0); - ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0); - - /* - * give the hardware some time to really stop all rx/tx activity - * clearing the descriptors too early causes random memory corruption - */ - mdelay(1); - - /* clear descriptor addresses */ - ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->stop_desc_dma); - ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->stop_desc_dma); - - /* clear pending RX/TX interrupts */ - for (i = 0; i < 256; i++) { - ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR); - ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS); - } - - /* clear pending errors */ - ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE | RX_STATUS_OF); - ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE | TX_STATUS_UR); - - val = ag71xx_rr(ag, AG71XX_REG_RX_STATUS); - if (val) - printk(KERN_ALERT "%s: unable to clear DMA Rx status: %08x\n", - ag->dev->name, val); - - val = ag71xx_rr(ag, AG71XX_REG_TX_STATUS); - - /* mask out reserved bits */ - val &= ~0xff000000; - - if (val) - printk(KERN_ALERT "%s: unable to clear DMA Tx status: %08x\n", - ag->dev->name, val); - - ag71xx_dump_dma_regs(ag); -} - -#define MAC_CFG1_INIT (MAC_CFG1_RXE | MAC_CFG1_TXE | \ - MAC_CFG1_SRX | MAC_CFG1_STX) - -#define FIFO_CFG0_INIT (FIFO_CFG0_ALL << FIFO_CFG0_ENABLE_SHIFT) - -#define FIFO_CFG4_INIT (FIFO_CFG4_DE | FIFO_CFG4_DV | FIFO_CFG4_FC | \ - FIFO_CFG4_CE | FIFO_CFG4_CR | FIFO_CFG4_LM | \ - FIFO_CFG4_LO | FIFO_CFG4_OK | FIFO_CFG4_MC | \ - FIFO_CFG4_BC | FIFO_CFG4_DR | FIFO_CFG4_LE | \ - FIFO_CFG4_CF | FIFO_CFG4_PF | FIFO_CFG4_UO | \ - FIFO_CFG4_VT) - -#define FIFO_CFG5_INIT (FIFO_CFG5_DE | FIFO_CFG5_DV | FIFO_CFG5_FC | \ - FIFO_CFG5_CE | FIFO_CFG5_LO | FIFO_CFG5_OK | \ - FIFO_CFG5_MC | FIFO_CFG5_BC | FIFO_CFG5_DR | \ - FIFO_CFG5_CF | FIFO_CFG5_PF | FIFO_CFG5_VT | \ - FIFO_CFG5_LE | FIFO_CFG5_FT | FIFO_CFG5_16 | \ - FIFO_CFG5_17 | FIFO_CFG5_SF) - -static void ag71xx_hw_stop(struct ag71xx *ag) -{ - /* disable all interrupts and stop the rx/tx engine */ - ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, 0); - ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0); - ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0); -} - -static void ag71xx_hw_setup(struct ag71xx *ag) -{ - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - - /* setup MAC configuration registers */ - ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_INIT); - - ag71xx_sb(ag, AG71XX_REG_MAC_CFG2, - MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK); - - /* setup max frame length */ - ag71xx_wr(ag, AG71XX_REG_MAC_MFL, AG71XX_TX_MTU_LEN); - - /* setup FIFO configuration registers */ - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG0, FIFO_CFG0_INIT); - if (pdata->is_ar724x) { - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, pdata->fifo_cfg1); - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, pdata->fifo_cfg2); - } else { - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, 0x0fff0000); - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, 0x00001fff); - } - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG4, FIFO_CFG4_INIT); - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, FIFO_CFG5_INIT); -} - -static void ag71xx_hw_init(struct ag71xx *ag) -{ - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - u32 reset_mask = pdata->reset_bit; - - ag71xx_hw_stop(ag); - - if (pdata->is_ar724x) { - u32 reset_phy = reset_mask; - - reset_phy &= RESET_MODULE_GE0_PHY | RESET_MODULE_GE1_PHY; - reset_mask &= ~(RESET_MODULE_GE0_PHY | RESET_MODULE_GE1_PHY); - - ar71xx_device_stop(reset_phy); - mdelay(50); - ar71xx_device_start(reset_phy); - mdelay(200); - } - - ag71xx_sb(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_SR); - udelay(20); - - ar71xx_device_stop(reset_mask); - mdelay(100); - ar71xx_device_start(reset_mask); - mdelay(200); - - ag71xx_hw_setup(ag); - - ag71xx_dma_reset(ag); -} - -static void ag71xx_fast_reset(struct ag71xx *ag) -{ - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - struct net_device *dev = ag->dev; - u32 reset_mask = pdata->reset_bit; - u32 rx_ds, tx_ds; - u32 mii_reg; - - reset_mask &= RESET_MODULE_GE0_MAC | RESET_MODULE_GE1_MAC; - - mii_reg = ag71xx_rr(ag, AG71XX_REG_MII_CFG); - rx_ds = ag71xx_rr(ag, AG71XX_REG_RX_DESC); - tx_ds = ag71xx_rr(ag, AG71XX_REG_TX_DESC); - - ar71xx_device_stop(reset_mask); - udelay(10); - ar71xx_device_start(reset_mask); - udelay(10); - - ag71xx_dma_reset(ag); - ag71xx_hw_setup(ag); - - ag71xx_wr(ag, AG71XX_REG_RX_DESC, rx_ds); - ag71xx_wr(ag, AG71XX_REG_TX_DESC, tx_ds); - ag71xx_wr(ag, AG71XX_REG_MII_CFG, mii_reg); - - ag71xx_hw_set_macaddr(ag, dev->dev_addr); -} - -static void ag71xx_hw_start(struct ag71xx *ag) -{ - /* start RX engine */ - ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE); - - /* enable interrupts */ - ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, AG71XX_INT_INIT); -} - -void ag71xx_link_adjust(struct ag71xx *ag) -{ - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - u32 cfg2; - u32 ifctl; - u32 fifo5; - - if (!ag->link) { - ag71xx_hw_stop(ag); - netif_carrier_off(ag->dev); - if (netif_msg_link(ag)) - printk(KERN_INFO "%s: link down\n", ag->dev->name); - return; - } - - if (pdata->is_ar724x) - ag71xx_fast_reset(ag); - - cfg2 = ag71xx_rr(ag, AG71XX_REG_MAC_CFG2); - cfg2 &= ~(MAC_CFG2_IF_1000 | MAC_CFG2_IF_10_100 | MAC_CFG2_FDX); - cfg2 |= (ag->duplex) ? MAC_CFG2_FDX : 0; - - ifctl = ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL); - ifctl &= ~(MAC_IFCTL_SPEED); - - fifo5 = ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5); - fifo5 &= ~FIFO_CFG5_BM; - - switch (ag->speed) { - case SPEED_1000: - cfg2 |= MAC_CFG2_IF_1000; - fifo5 |= FIFO_CFG5_BM; - break; - case SPEED_100: - cfg2 |= MAC_CFG2_IF_10_100; - ifctl |= MAC_IFCTL_SPEED; - break; - case SPEED_10: - cfg2 |= MAC_CFG2_IF_10_100; - break; - default: - BUG(); - return; - } - - if (pdata->is_ar91xx) - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x00780fff); - else if (pdata->is_ar724x) - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, pdata->fifo_cfg3); - else - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x008001ff); - - if (pdata->set_speed) - pdata->set_speed(ag->speed); - - ag71xx_wr(ag, AG71XX_REG_MAC_CFG2, cfg2); - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, fifo5); - ag71xx_wr(ag, AG71XX_REG_MAC_IFCTL, ifctl); - ag71xx_hw_start(ag); - - netif_carrier_on(ag->dev); - if (netif_msg_link(ag)) - printk(KERN_INFO "%s: link up (%sMbps/%s duplex)\n", - ag->dev->name, - ag71xx_speed_str(ag), - (DUPLEX_FULL == ag->duplex) ? "Full" : "Half"); - - DBG("%s: fifo_cfg0=%#x, fifo_cfg1=%#x, fifo_cfg2=%#x\n", - ag->dev->name, - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0), - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1), - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2)); - - DBG("%s: fifo_cfg3=%#x, fifo_cfg4=%#x, fifo_cfg5=%#x\n", - ag->dev->name, - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3), - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4), - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5)); - - DBG("%s: mac_cfg2=%#x, mac_ifctl=%#x, mii_ctrl=%#x\n", - ag->dev->name, - ag71xx_rr(ag, AG71XX_REG_MAC_CFG2), - ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL), - ag71xx_mii_ctrl_rr(ag)); -} - -static int ag71xx_open(struct net_device *dev) -{ - struct ag71xx *ag = netdev_priv(dev); - int ret; - - ret = ag71xx_rings_init(ag); - if (ret) - goto err; - - napi_enable(&ag->napi); - - netif_carrier_off(dev); - ag71xx_phy_start(ag); - - ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->tx_ring.descs_dma); - ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->rx_ring.descs_dma); - - ag71xx_hw_set_macaddr(ag, dev->dev_addr); - - netif_start_queue(dev); - - return 0; - -err: - ag71xx_rings_cleanup(ag); - return ret; -} - -static int ag71xx_stop(struct net_device *dev) -{ - struct ag71xx *ag = netdev_priv(dev); - unsigned long flags; - - netif_carrier_off(dev); - ag71xx_phy_stop(ag); - - spin_lock_irqsave(&ag->lock, flags); - - netif_stop_queue(dev); - - ag71xx_hw_stop(ag); - ag71xx_dma_reset(ag); - - napi_disable(&ag->napi); - del_timer_sync(&ag->oom_timer); - - spin_unlock_irqrestore(&ag->lock, flags); - - ag71xx_rings_cleanup(ag); - - return 0; -} - -static netdev_tx_t ag71xx_hard_start_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct ag71xx *ag = netdev_priv(dev); - struct ag71xx_ring *ring = &ag->tx_ring; - struct ag71xx_desc *desc; - dma_addr_t dma_addr; - int i; - - i = ring->curr % ring->size; - desc = ring->buf[i].desc; - - if (!ag71xx_desc_empty(desc)) - goto err_drop; - - if (ag71xx_has_ar8216(ag)) - ag71xx_add_ar8216_header(ag, skb); - - if (skb->len <= 0) { - DBG("%s: packet len is too small\n", ag->dev->name); - goto err_drop; - } - - dma_addr = dma_map_single(&dev->dev, skb->data, skb->len, - DMA_TO_DEVICE); - - ring->buf[i].skb = skb; - ring->buf[i].timestamp = jiffies; - - /* setup descriptor fields */ - desc->data = (u32) dma_addr; - desc->ctrl = (skb->len & DESC_PKTLEN_M); - - /* flush descriptor */ - wmb(); - - ring->curr++; - if (ring->curr == (ring->dirty + ring->size)) { - DBG("%s: tx queue full\n", ag->dev->name); - netif_stop_queue(dev); - } - - DBG("%s: packet injected into TX queue\n", ag->dev->name); - - /* enable TX engine */ - ag71xx_wr(ag, AG71XX_REG_TX_CTRL, TX_CTRL_TXE); - - return NETDEV_TX_OK; - -err_drop: - dev->stats.tx_dropped++; - - dev_kfree_skb(skb); - return NETDEV_TX_OK; -} - -static int ag71xx_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - struct ag71xx *ag = netdev_priv(dev); - int ret; - - switch (cmd) { - case SIOCETHTOOL: - if (ag->phy_dev == NULL) - break; - - spin_lock_irq(&ag->lock); - ret = phy_ethtool_ioctl(ag->phy_dev, (void *) ifr->ifr_data); - spin_unlock_irq(&ag->lock); - return ret; - - case SIOCSIFHWADDR: - if (copy_from_user - (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr))) - return -EFAULT; - return 0; - - case SIOCGIFHWADDR: - if (copy_to_user - (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr))) - return -EFAULT; - return 0; - - case SIOCGMIIPHY: - case SIOCGMIIREG: - case SIOCSMIIREG: - if (ag->phy_dev == NULL) - break; - - return phy_mii_ioctl(ag->phy_dev, ifr, cmd); - - default: - break; - } - - return -EOPNOTSUPP; -} - -static void ag71xx_oom_timer_handler(unsigned long data) -{ - struct net_device *dev = (struct net_device *) data; - struct ag71xx *ag = netdev_priv(dev); - - napi_schedule(&ag->napi); -} - -static void ag71xx_tx_timeout(struct net_device *dev) -{ - struct ag71xx *ag = netdev_priv(dev); - - if (netif_msg_tx_err(ag)) - printk(KERN_DEBUG "%s: tx timeout\n", ag->dev->name); - - schedule_work(&ag->restart_work); -} - -static void ag71xx_restart_work_func(struct work_struct *work) -{ - struct ag71xx *ag = container_of(work, struct ag71xx, restart_work); - - if (ag71xx_get_pdata(ag)->is_ar724x) { - ag->link = 0; - ag71xx_link_adjust(ag); - return; - } - - ag71xx_stop(ag->dev); - ag71xx_open(ag->dev); -} - -static bool ag71xx_check_dma_stuck(struct ag71xx *ag, unsigned long timestamp) -{ - u32 rx_sm, tx_sm, rx_fd; - - if (likely(time_before(jiffies, timestamp + HZ/10))) - return false; - - if (!netif_carrier_ok(ag->dev)) - return false; - - rx_sm = ag71xx_rr(ag, AG71XX_REG_RX_SM); - if ((rx_sm & 0x7) == 0x3 && ((rx_sm >> 4) & 0x7) == 0x6) - return true; - - tx_sm = ag71xx_rr(ag, AG71XX_REG_TX_SM); - rx_fd = ag71xx_rr(ag, AG71XX_REG_FIFO_DEPTH); - if (((tx_sm >> 4) & 0x7) == 0 && ((rx_sm & 0x7) == 0) && - ((rx_sm >> 4) & 0x7) == 0 && rx_fd == 0) - return true; - - return false; -} - -static int ag71xx_tx_packets(struct ag71xx *ag) -{ - struct ag71xx_ring *ring = &ag->tx_ring; - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - int sent; - - DBG("%s: processing TX ring\n", ag->dev->name); - - sent = 0; - while (ring->dirty != ring->curr) { - unsigned int i = ring->dirty % ring->size; - struct ag71xx_desc *desc = ring->buf[i].desc; - struct sk_buff *skb = ring->buf[i].skb; - - if (!ag71xx_desc_empty(desc)) { - if (pdata->is_ar7240 && - ag71xx_check_dma_stuck(ag, ring->buf[i].timestamp)) - schedule_work(&ag->restart_work); - break; - } - - ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS); - - ag->dev->stats.tx_bytes += skb->len; - ag->dev->stats.tx_packets++; - - dev_kfree_skb_any(skb); - ring->buf[i].skb = NULL; - - ring->dirty++; - sent++; - } - - DBG("%s: %d packets sent out\n", ag->dev->name, sent); - - if ((ring->curr - ring->dirty) < (ring->size * 3) / 4) - netif_wake_queue(ag->dev); - - return sent; -} - -static int ag71xx_rx_packets(struct ag71xx *ag, int limit) -{ - struct net_device *dev = ag->dev; - struct ag71xx_ring *ring = &ag->rx_ring; - int done = 0; - - DBG("%s: rx packets, limit=%d, curr=%u, dirty=%u\n", - dev->name, limit, ring->curr, ring->dirty); - - while (done < limit) { - unsigned int i = ring->curr % ring->size; - struct ag71xx_desc *desc = ring->buf[i].desc; - struct sk_buff *skb; - int pktlen; - int err = 0; - - if (ag71xx_desc_empty(desc)) - break; - - if ((ring->dirty + ring->size) == ring->curr) { - ag71xx_assert(0); - break; - } - - ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR); - - skb = ring->buf[i].skb; - pktlen = ag71xx_desc_pktlen(desc); - pktlen -= ETH_FCS_LEN; - - dma_unmap_single(&dev->dev, ring->buf[i].dma_addr, - AG71XX_RX_PKT_SIZE, DMA_FROM_DEVICE); - - dev->last_rx = jiffies; - dev->stats.rx_packets++; - dev->stats.rx_bytes += pktlen; - - skb_put(skb, pktlen); - if (ag71xx_has_ar8216(ag)) - err = ag71xx_remove_ar8216_header(ag, skb, pktlen); - - if (err) { - dev->stats.rx_dropped++; - kfree_skb(skb); - } else { - skb->dev = dev; - skb->ip_summed = CHECKSUM_NONE; - if (ag->phy_dev) { - ag->phy_dev->netif_receive_skb(skb); - } else { - skb->protocol = eth_type_trans(skb, dev); - netif_receive_skb(skb); - } - } - - ring->buf[i].skb = NULL; - done++; - - ring->curr++; - } - - ag71xx_ring_rx_refill(ag); - - DBG("%s: rx finish, curr=%u, dirty=%u, done=%d\n", - dev->name, ring->curr, ring->dirty, done); - - return done; -} - -static int ag71xx_poll(struct napi_struct *napi, int limit) -{ - struct ag71xx *ag = container_of(napi, struct ag71xx, napi); - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - struct net_device *dev = ag->dev; - struct ag71xx_ring *rx_ring; - unsigned long flags; - u32 status; - int tx_done; - int rx_done; - - pdata->ddr_flush(); - tx_done = ag71xx_tx_packets(ag); - - DBG("%s: processing RX ring\n", dev->name); - rx_done = ag71xx_rx_packets(ag, limit); - - ag71xx_debugfs_update_napi_stats(ag, rx_done, tx_done); - - rx_ring = &ag->rx_ring; - if (rx_ring->buf[rx_ring->dirty % rx_ring->size].skb == NULL) - goto oom; - - status = ag71xx_rr(ag, AG71XX_REG_RX_STATUS); - if (unlikely(status & RX_STATUS_OF)) { - ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_OF); - dev->stats.rx_fifo_errors++; - - /* restart RX */ - ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE); - } - - if (rx_done < limit) { - if (status & RX_STATUS_PR) - goto more; - - status = ag71xx_rr(ag, AG71XX_REG_TX_STATUS); - if (status & TX_STATUS_PS) - goto more; - - DBG("%s: disable polling mode, rx=%d, tx=%d,limit=%d\n", - dev->name, rx_done, tx_done, limit); - - napi_complete(napi); - - /* enable interrupts */ - spin_lock_irqsave(&ag->lock, flags); - ag71xx_int_enable(ag, AG71XX_INT_POLL); - spin_unlock_irqrestore(&ag->lock, flags); - return rx_done; - } - -more: - DBG("%s: stay in polling mode, rx=%d, tx=%d, limit=%d\n", - dev->name, rx_done, tx_done, limit); - return rx_done; - -oom: - if (netif_msg_rx_err(ag)) - printk(KERN_DEBUG "%s: out of memory\n", dev->name); - - mod_timer(&ag->oom_timer, jiffies + AG71XX_OOM_REFILL); - napi_complete(napi); - return 0; -} - -static irqreturn_t ag71xx_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct ag71xx *ag = netdev_priv(dev); - u32 status; - - status = ag71xx_rr(ag, AG71XX_REG_INT_STATUS); - ag71xx_dump_intr(ag, "raw", status); - - if (unlikely(!status)) - return IRQ_NONE; - - if (unlikely(status & AG71XX_INT_ERR)) { - if (status & AG71XX_INT_TX_BE) { - ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE); - dev_err(&dev->dev, "TX BUS error\n"); - } - if (status & AG71XX_INT_RX_BE) { - ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE); - dev_err(&dev->dev, "RX BUS error\n"); - } - } - - if (likely(status & AG71XX_INT_POLL)) { - ag71xx_int_disable(ag, AG71XX_INT_POLL); - DBG("%s: enable polling mode\n", dev->name); - napi_schedule(&ag->napi); - } - - ag71xx_debugfs_update_int_stats(ag, status); - - return IRQ_HANDLED; -} - -static void ag71xx_set_multicast_list(struct net_device *dev) -{ - /* TODO */ -} - -#ifdef CONFIG_NET_POLL_CONTROLLER -/* - * Polling 'interrupt' - used by things like netconsole to send skbs - * without having to re-enable interrupts. It's not called while - * the interrupt routine is executing. - */ -static void ag71xx_netpoll(struct net_device *dev) -{ - disable_irq(dev->irq); - ag71xx_interrupt(dev->irq, dev); - enable_irq(dev->irq); -} -#endif - -static const struct net_device_ops ag71xx_netdev_ops = { - .ndo_open = ag71xx_open, - .ndo_stop = ag71xx_stop, - .ndo_start_xmit = ag71xx_hard_start_xmit, - .ndo_set_multicast_list = ag71xx_set_multicast_list, - .ndo_do_ioctl = ag71xx_do_ioctl, - .ndo_tx_timeout = ag71xx_tx_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ag71xx_netpoll, -#endif -}; - -static int __devinit ag71xx_probe(struct platform_device *pdev) -{ - struct net_device *dev; - struct resource *res; - struct ag71xx *ag; - struct ag71xx_platform_data *pdata; - int err; - - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "no platform data specified\n"); - err = -ENXIO; - goto err_out; - } - - if (pdata->mii_bus_dev == NULL) { - dev_err(&pdev->dev, "no MII bus device specified\n"); - err = -EINVAL; - goto err_out; - } - - dev = alloc_etherdev(sizeof(*ag)); - if (!dev) { - dev_err(&pdev->dev, "alloc_etherdev failed\n"); - err = -ENOMEM; - goto err_out; - } - - SET_NETDEV_DEV(dev, &pdev->dev); - - ag = netdev_priv(dev); - ag->pdev = pdev; - ag->dev = dev; - ag->msg_enable = netif_msg_init(ag71xx_msg_level, - AG71XX_DEFAULT_MSG_ENABLE); - spin_lock_init(&ag->lock); - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac_base"); - if (!res) { - dev_err(&pdev->dev, "no mac_base resource found\n"); - err = -ENXIO; - goto err_out; - } - - ag->mac_base = ioremap_nocache(res->start, res->end - res->start + 1); - if (!ag->mac_base) { - dev_err(&pdev->dev, "unable to ioremap mac_base\n"); - err = -ENOMEM; - goto err_free_dev; - } - - dev->irq = platform_get_irq(pdev, 0); - err = request_irq(dev->irq, ag71xx_interrupt, - IRQF_DISABLED, - dev->name, dev); - if (err) { - dev_err(&pdev->dev, "unable to request IRQ %d\n", dev->irq); - goto err_unmap_base; - } - - dev->base_addr = (unsigned long)ag->mac_base; - dev->netdev_ops = &ag71xx_netdev_ops; - dev->ethtool_ops = &ag71xx_ethtool_ops; - - INIT_WORK(&ag->restart_work, ag71xx_restart_work_func); - - init_timer(&ag->oom_timer); - ag->oom_timer.data = (unsigned long) dev; - ag->oom_timer.function = ag71xx_oom_timer_handler; - - ag->tx_ring.size = AG71XX_TX_RING_SIZE_DEFAULT; - ag->rx_ring.size = AG71XX_RX_RING_SIZE_DEFAULT; - - ag->stop_desc = dma_alloc_coherent(NULL, - sizeof(struct ag71xx_desc), &ag->stop_desc_dma, GFP_KERNEL); - - if (!ag->stop_desc) - goto err_free_irq; - - ag->stop_desc->data = 0; - ag->stop_desc->ctrl = 0; - ag->stop_desc->next = (u32) ag->stop_desc_dma; - - memcpy(dev->dev_addr, pdata->mac_addr, ETH_ALEN); - - netif_napi_add(dev, &ag->napi, ag71xx_poll, AG71XX_NAPI_WEIGHT); - - err = register_netdev(dev); - if (err) { - dev_err(&pdev->dev, "unable to register net device\n"); - goto err_free_desc; - } - - printk(KERN_INFO "%s: Atheros AG71xx at 0x%08lx, irq %d\n", - dev->name, dev->base_addr, dev->irq); - - ag71xx_dump_regs(ag); - - ag71xx_hw_init(ag); - - ag71xx_dump_regs(ag); - - err = ag71xx_phy_connect(ag); - if (err) - goto err_unregister_netdev; - - err = ag71xx_debugfs_init(ag); - if (err) - goto err_phy_disconnect; - - platform_set_drvdata(pdev, dev); - - return 0; - -err_phy_disconnect: - ag71xx_phy_disconnect(ag); -err_unregister_netdev: - unregister_netdev(dev); -err_free_desc: - dma_free_coherent(NULL, sizeof(struct ag71xx_desc), ag->stop_desc, - ag->stop_desc_dma); -err_free_irq: - free_irq(dev->irq, dev); -err_unmap_base: - iounmap(ag->mac_base); -err_free_dev: - kfree(dev); -err_out: - platform_set_drvdata(pdev, NULL); - return err; -} - -static int __devexit ag71xx_remove(struct platform_device *pdev) -{ - struct net_device *dev = platform_get_drvdata(pdev); - - if (dev) { - struct ag71xx *ag = netdev_priv(dev); - - ag71xx_debugfs_exit(ag); - ag71xx_phy_disconnect(ag); - unregister_netdev(dev); - free_irq(dev->irq, dev); - iounmap(ag->mac_base); - kfree(dev); - platform_set_drvdata(pdev, NULL); - } - - return 0; -} - -static struct platform_driver ag71xx_driver = { - .probe = ag71xx_probe, - .remove = __exit_p(ag71xx_remove), - .driver = { - .name = AG71XX_DRV_NAME, - } -}; - -static int __init ag71xx_module_init(void) -{ - int ret; - - ret = ag71xx_debugfs_root_init(); - if (ret) - goto err_out; - - ret = ag71xx_mdio_driver_init(); - if (ret) - goto err_debugfs_exit; - - ret = platform_driver_register(&ag71xx_driver); - if (ret) - goto err_mdio_exit; - - return 0; - -err_mdio_exit: - ag71xx_mdio_driver_exit(); -err_debugfs_exit: - ag71xx_debugfs_root_exit(); -err_out: - return ret; -} - -static void __exit ag71xx_module_exit(void) -{ - platform_driver_unregister(&ag71xx_driver); - ag71xx_mdio_driver_exit(); - ag71xx_debugfs_root_exit(); -} - -module_init(ag71xx_module_init); -module_exit(ag71xx_module_exit); - -MODULE_VERSION(AG71XX_DRV_VERSION); -MODULE_AUTHOR("Gabor Juhos "); -MODULE_AUTHOR("Imre Kaloz "); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:" AG71XX_DRV_NAME); diff --git a/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx_mdio.c b/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx_mdio.c deleted file mode 100644 index b2460d726e..0000000000 --- a/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx_mdio.c +++ /dev/null @@ -1,248 +0,0 @@ -/* - * Atheros AR71xx built-in ethernet mac driver - * - * Copyright (C) 2008-2010 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Based on Atheros' AG7100 driver - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include "ag71xx.h" - -#define AG71XX_MDIO_RETRY 1000 -#define AG71XX_MDIO_DELAY 5 - -static inline void ag71xx_mdio_wr(struct ag71xx_mdio *am, unsigned reg, - u32 value) -{ - void __iomem *r; - - r = am->mdio_base + reg; - __raw_writel(value, r); - - /* flush write */ - (void) __raw_readl(r); -} - -static inline u32 ag71xx_mdio_rr(struct ag71xx_mdio *am, unsigned reg) -{ - return __raw_readl(am->mdio_base + reg); -} - -static void ag71xx_mdio_dump_regs(struct ag71xx_mdio *am) -{ - DBG("%s: mii_cfg=%08x, mii_cmd=%08x, mii_addr=%08x\n", - am->mii_bus->name, - ag71xx_mdio_rr(am, AG71XX_REG_MII_CFG), - ag71xx_mdio_rr(am, AG71XX_REG_MII_CMD), - ag71xx_mdio_rr(am, AG71XX_REG_MII_ADDR)); - DBG("%s: mii_ctrl=%08x, mii_status=%08x, mii_ind=%08x\n", - am->mii_bus->name, - ag71xx_mdio_rr(am, AG71XX_REG_MII_CTRL), - ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS), - ag71xx_mdio_rr(am, AG71XX_REG_MII_IND)); -} - -int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg) -{ - int ret; - int i; - - ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE); - ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR, - ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff)); - ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_READ); - - i = AG71XX_MDIO_RETRY; - while (ag71xx_mdio_rr(am, AG71XX_REG_MII_IND) & MII_IND_BUSY) { - if (i-- == 0) { - printk(KERN_ERR "%s: mii_read timed out\n", - am->mii_bus->name); - ret = 0xffff; - goto out; - } - udelay(AG71XX_MDIO_DELAY); - } - - ret = ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS) & 0xffff; - ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE); - - DBG("mii_read: addr=%04x, reg=%04x, value=%04x\n", addr, reg, ret); - -out: - return ret; -} - -void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val) -{ - int i; - - DBG("mii_write: addr=%04x, reg=%04x, value=%04x\n", addr, reg, val); - - ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR, - ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff)); - ag71xx_mdio_wr(am, AG71XX_REG_MII_CTRL, val); - - i = AG71XX_MDIO_RETRY; - while (ag71xx_mdio_rr(am, AG71XX_REG_MII_IND) & MII_IND_BUSY) { - if (i-- == 0) { - printk(KERN_ERR "%s: mii_write timed out\n", - am->mii_bus->name); - break; - } - udelay(AG71XX_MDIO_DELAY); - } -} - -static int ag71xx_mdio_reset(struct mii_bus *bus) -{ - struct ag71xx_mdio *am = bus->priv; - u32 t; - - if (am->pdata->is_ar7240) - t = MII_CFG_CLK_DIV_6; - else - t = MII_CFG_CLK_DIV_28; - - ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t | MII_CFG_RESET); - udelay(100); - - ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t); - udelay(100); - - return 0; -} - -static int ag71xx_mdio_read(struct mii_bus *bus, int addr, int reg) -{ - struct ag71xx_mdio *am = bus->priv; - - if (am->pdata->is_ar7240) - return ar7240sw_phy_read(bus, addr, reg); - else - return ag71xx_mdio_mii_read(am, addr, reg); -} - -static int ag71xx_mdio_write(struct mii_bus *bus, int addr, int reg, u16 val) -{ - struct ag71xx_mdio *am = bus->priv; - - if (am->pdata->is_ar7240) - ar7240sw_phy_write(bus, addr, reg, val); - else - ag71xx_mdio_mii_write(am, addr, reg, val); - return 0; -} - -static int __devinit ag71xx_mdio_probe(struct platform_device *pdev) -{ - struct ag71xx_mdio_platform_data *pdata; - struct ag71xx_mdio *am; - struct resource *res; - int i; - int err; - - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "no platform data specified\n"); - return -EINVAL; - } - - am = kzalloc(sizeof(*am), GFP_KERNEL); - if (!am) { - err = -ENOMEM; - goto err_out; - } - - am->pdata = pdata; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "no iomem resource found\n"); - err = -ENXIO; - goto err_out; - } - - am->mdio_base = ioremap_nocache(res->start, res->end - res->start + 1); - if (!am->mdio_base) { - dev_err(&pdev->dev, "unable to ioremap registers\n"); - err = -ENOMEM; - goto err_free_mdio; - } - - am->mii_bus = mdiobus_alloc(); - if (am->mii_bus == NULL) { - err = -ENOMEM; - goto err_iounmap; - } - - am->mii_bus->name = "ag71xx_mdio"; - am->mii_bus->read = ag71xx_mdio_read; - am->mii_bus->write = ag71xx_mdio_write; - am->mii_bus->reset = ag71xx_mdio_reset; - am->mii_bus->irq = am->mii_irq; - am->mii_bus->priv = am; - am->mii_bus->parent = &pdev->dev; - snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev)); - am->mii_bus->phy_mask = pdata->phy_mask; - - for (i = 0; i < PHY_MAX_ADDR; i++) - am->mii_irq[i] = PHY_POLL; - - ag71xx_mdio_wr(am, AG71XX_REG_MAC_CFG1, 0); - - err = mdiobus_register(am->mii_bus); - if (err) - goto err_free_bus; - - ag71xx_mdio_dump_regs(am); - - platform_set_drvdata(pdev, am); - return 0; - -err_free_bus: - mdiobus_free(am->mii_bus); -err_iounmap: - iounmap(am->mdio_base); -err_free_mdio: - kfree(am); -err_out: - return err; -} - -static int __devexit ag71xx_mdio_remove(struct platform_device *pdev) -{ - struct ag71xx_mdio *am = platform_get_drvdata(pdev); - - if (am) { - mdiobus_unregister(am->mii_bus); - mdiobus_free(am->mii_bus); - iounmap(am->mdio_base); - kfree(am); - platform_set_drvdata(pdev, NULL); - } - - return 0; -} - -static struct platform_driver ag71xx_mdio_driver = { - .probe = ag71xx_mdio_probe, - .remove = __exit_p(ag71xx_mdio_remove), - .driver = { - .name = "ag71xx-mdio", - } -}; - -int __init ag71xx_mdio_driver_init(void) -{ - return platform_driver_register(&ag71xx_mdio_driver); -} - -void ag71xx_mdio_driver_exit(void) -{ - platform_driver_unregister(&ag71xx_mdio_driver); -} diff --git a/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx_phy.c b/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx_phy.c deleted file mode 100644 index b10dd4917d..0000000000 --- a/target/linux/ar71xx/files-2.6.39/drivers/net/ag71xx/ag71xx_phy.c +++ /dev/null @@ -1,236 +0,0 @@ -/* - * Atheros AR71xx built-in ethernet mac driver - * - * Copyright (C) 2008-2010 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Based on Atheros' AG7100 driver - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include "ag71xx.h" - -static void ag71xx_phy_link_adjust(struct net_device *dev) -{ - struct ag71xx *ag = netdev_priv(dev); - struct phy_device *phydev = ag->phy_dev; - unsigned long flags; - int status_change = 0; - - spin_lock_irqsave(&ag->lock, flags); - - if (phydev->link) { - if (ag->duplex != phydev->duplex - || ag->speed != phydev->speed) { - status_change = 1; - } - } - - if (phydev->link != ag->link) - status_change = 1; - - ag->link = phydev->link; - ag->duplex = phydev->duplex; - ag->speed = phydev->speed; - - if (status_change) - ag71xx_link_adjust(ag); - - spin_unlock_irqrestore(&ag->lock, flags); -} - -void ag71xx_phy_start(struct ag71xx *ag) -{ - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - - if (ag->phy_dev) { - phy_start(ag->phy_dev); - } else if (pdata->switch_data) { - ag71xx_ar7240_start(ag); - } else { - ag->link = 1; - ag71xx_link_adjust(ag); - } -} - -void ag71xx_phy_stop(struct ag71xx *ag) -{ - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - unsigned long flags; - - if (ag->phy_dev) - phy_stop(ag->phy_dev); - else if (pdata->switch_data) - ag71xx_ar7240_stop(ag); - - spin_lock_irqsave(&ag->lock, flags); - if (ag->link) { - ag->link = 0; - ag71xx_link_adjust(ag); - } - spin_unlock_irqrestore(&ag->lock, flags); -} - -static int ag71xx_phy_connect_fixed(struct ag71xx *ag) -{ - struct net_device *dev = ag->dev; - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - int ret = 0; - - /* use fixed settings */ - switch (pdata->speed) { - case SPEED_10: - case SPEED_100: - case SPEED_1000: - break; - default: - printk(KERN_ERR "%s: invalid speed specified\n", dev->name); - ret = -EINVAL; - break; - } - - printk(KERN_DEBUG "%s: using fixed link parameters\n", dev->name); - - ag->duplex = pdata->duplex; - ag->speed = pdata->speed; - - return ret; -} - -static int ag71xx_phy_connect_multi(struct ag71xx *ag) -{ - struct net_device *dev = ag->dev; - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - struct phy_device *phydev = NULL; - int phy_addr; - int ret = 0; - - for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { - if (!(pdata->phy_mask & (1 << phy_addr))) - continue; - - if (ag->mii_bus->phy_map[phy_addr] == NULL) - continue; - - DBG("%s: PHY found at %s, uid=%08x\n", - dev->name, - dev_name(&ag->mii_bus->phy_map[phy_addr]->dev), - ag->mii_bus->phy_map[phy_addr]->phy_id); - - if (phydev == NULL) - phydev = ag->mii_bus->phy_map[phy_addr]; - } - - if (!phydev) { - printk(KERN_ERR "%s: no PHY found with phy_mask=%08x\n", - dev->name, pdata->phy_mask); - return -ENODEV; - } - - ag->phy_dev = phy_connect(dev, dev_name(&phydev->dev), - &ag71xx_phy_link_adjust, 0, - pdata->phy_if_mode); - - if (IS_ERR(ag->phy_dev)) { - printk(KERN_ERR "%s: could not connect to PHY at %s\n", - dev->name, dev_name(&phydev->dev)); - return PTR_ERR(ag->phy_dev); - } - - /* mask with MAC supported features */ - if (pdata->has_gbit) - phydev->supported &= PHY_GBIT_FEATURES; - else - phydev->supported &= PHY_BASIC_FEATURES; - - phydev->advertising = phydev->supported; - - printk(KERN_DEBUG "%s: connected to PHY at %s [uid=%08x, driver=%s]\n", - dev->name, dev_name(&phydev->dev), - phydev->phy_id, phydev->drv->name); - - ag->link = 0; - ag->speed = 0; - ag->duplex = -1; - - return ret; -} - -static int dev_is_class(struct device *dev, void *class) -{ - if (dev->class != NULL && !strcmp(dev->class->name, class)) - return 1; - - return 0; -} - -static struct device *dev_find_class(struct device *parent, char *class) -{ - if (dev_is_class(parent, class)) { - get_device(parent); - return parent; - } - - return device_find_child(parent, class, dev_is_class); -} - -static struct mii_bus *dev_to_mii_bus(struct device *dev) -{ - struct device *d; - - d = dev_find_class(dev, "mdio_bus"); - if (d != NULL) { - struct mii_bus *bus; - - bus = to_mii_bus(d); - put_device(d); - - return bus; - } - - return NULL; -} - -int __devinit ag71xx_phy_connect(struct ag71xx *ag) -{ - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - - if (pdata->mii_bus_dev == NULL || - pdata->mii_bus_dev->bus == NULL ) - return ag71xx_phy_connect_fixed(ag); - - ag->mii_bus = dev_to_mii_bus(pdata->mii_bus_dev); - if (ag->mii_bus == NULL) { - printk(KERN_ERR "%s: unable to find MII bus on device '%s'\n", - ag->dev->name, dev_name(pdata->mii_bus_dev)); - return -ENODEV; - } - - /* Reset the mdio bus explicitly */ - if (ag->mii_bus->reset) { - mutex_lock(&ag->mii_bus->mdio_lock); - ag->mii_bus->reset(ag->mii_bus); - mutex_unlock(&ag->mii_bus->mdio_lock); - } - - if (pdata->switch_data) - return ag71xx_ar7240_init(ag); - - if (pdata->phy_mask) - return ag71xx_phy_connect_multi(ag); - - return ag71xx_phy_connect_fixed(ag); -} - -void ag71xx_phy_disconnect(struct ag71xx *ag) -{ - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - - if (pdata->switch_data) - ag71xx_ar7240_cleanup(ag); - else if (ag->phy_dev) - phy_disconnect(ag->phy_dev); -} diff --git a/target/linux/ar71xx/files-2.6.39/drivers/spi/ar71xx_spi.c b/target/linux/ar71xx/files-2.6.39/drivers/spi/ar71xx_spi.c deleted file mode 100644 index d1ed731c14..0000000000 --- a/target/linux/ar71xx/files-2.6.39/drivers/spi/ar71xx_spi.c +++ /dev/null @@ -1,283 +0,0 @@ -/* - * Atheros AR71xx SPI Controller driver - * - * Copyright (C) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define DRV_DESC "Atheros AR71xx SPI Controller driver" -#define DRV_VERSION "0.2.4" -#define DRV_NAME "ar71xx-spi" - -#undef PER_BIT_READ - -struct ar71xx_spi { - struct spi_bitbang bitbang; - u32 ioc_base; - u32 reg_ctrl; - - void __iomem *base; - - struct platform_device *pdev; - u32 (*get_ioc_base)(u8 chip_select, int cs_high, - int is_on); -}; - -static inline u32 ar71xx_spi_rr(struct ar71xx_spi *sp, unsigned reg) -{ - return __raw_readl(sp->base + reg); -} - -static inline void ar71xx_spi_wr(struct ar71xx_spi *sp, unsigned reg, u32 val) -{ - __raw_writel(val, sp->base + reg); -} - -static inline struct ar71xx_spi *spidev_to_sp(struct spi_device *spi) -{ - return spi_master_get_devdata(spi->master); -} - -static u32 ar71xx_spi_get_ioc_base(u8 chip_select, int cs_high, int is_on) -{ - u32 ret; - - if (is_on == AR71XX_SPI_CS_INACTIVE) - ret = SPI_IOC_CS_ALL; - else - ret = SPI_IOC_CS_ALL & ~SPI_IOC_CS(chip_select); - - return ret; -} - -static void ar71xx_spi_chipselect(struct spi_device *spi, int value) -{ - struct ar71xx_spi *sp = spidev_to_sp(spi); - void __iomem *base = sp->base; - u32 ioc_base; - - switch (value) { - case BITBANG_CS_INACTIVE: - ioc_base = sp->get_ioc_base(spi->chip_select, - (spi->mode & SPI_CS_HIGH) != 0, - AR71XX_SPI_CS_INACTIVE); - __raw_writel(ioc_base, base + SPI_REG_IOC); - break; - - case BITBANG_CS_ACTIVE: - ioc_base = sp->get_ioc_base(spi->chip_select, - (spi->mode & SPI_CS_HIGH) != 0, - AR71XX_SPI_CS_ACTIVE); - - __raw_writel(ioc_base, base + SPI_REG_IOC); - sp->ioc_base = ioc_base; - break; - } -} - -static void ar71xx_spi_setup_regs(struct ar71xx_spi *sp) -{ - /* enable GPIO mode */ - ar71xx_spi_wr(sp, SPI_REG_FS, SPI_FS_GPIO); - - /* save CTRL register */ - sp->reg_ctrl = ar71xx_spi_rr(sp, SPI_REG_CTRL); - - /* TODO: setup speed? */ - ar71xx_spi_wr(sp, SPI_REG_CTRL, 0x43); -} - -static void ar71xx_spi_restore_regs(struct ar71xx_spi *sp) -{ - /* restore CTRL register */ - ar71xx_spi_wr(sp, SPI_REG_CTRL, sp->reg_ctrl); - /* disable GPIO mode */ - ar71xx_spi_wr(sp, SPI_REG_FS, 0); -} - -static int ar71xx_spi_setup(struct spi_device *spi) -{ - if (spi->bits_per_word > 32) - return -EINVAL; - - return spi_bitbang_setup(spi); -} - -static void ar71xx_spi_cleanup(struct spi_device *spi) -{ - spi_bitbang_cleanup(spi); -} - -static u32 ar71xx_spi_txrx_mode0(struct spi_device *spi, unsigned nsecs, - u32 word, u8 bits) -{ - struct ar71xx_spi *sp = spidev_to_sp(spi); - void __iomem *base = sp->base; - u32 ioc = sp->ioc_base; - u32 ret; - - /* clock starts at inactive polarity */ - for (word <<= (32 - bits); likely(bits); bits--) { - u32 out; - - if (word & (1 << 31)) - out = ioc | SPI_IOC_DO; - else - out = ioc & ~SPI_IOC_DO; - - /* setup MSB (to slave) on trailing edge */ - __raw_writel(out, base + SPI_REG_IOC); - - __raw_writel(out | SPI_IOC_CLK, base + SPI_REG_IOC); - - word <<= 1; - -#ifdef PER_BIT_READ - /* sample MSB (from slave) on leading edge */ - ret = __raw_readl(base + SPI_REG_RDS); - __raw_writel(out, base + SPI_REG_IOC); -#endif - - } - -#ifndef PER_BIT_READ - ret = __raw_readl(base + SPI_REG_RDS); -#endif - return ret; -} - -static int ar71xx_spi_probe(struct platform_device *pdev) -{ - struct spi_master *master; - struct ar71xx_spi *sp; - struct ar71xx_spi_platform_data *pdata; - struct resource *r; - int ret; - - master = spi_alloc_master(&pdev->dev, sizeof(*sp)); - if (master == NULL) { - dev_err(&pdev->dev, "failed to allocate spi master\n"); - return -ENOMEM; - } - - sp = spi_master_get_devdata(master); - platform_set_drvdata(pdev, sp); - - pdata = pdev->dev.platform_data; - - master->setup = ar71xx_spi_setup; - master->cleanup = ar71xx_spi_cleanup; - - sp->bitbang.master = spi_master_get(master); - sp->bitbang.chipselect = ar71xx_spi_chipselect; - sp->bitbang.txrx_word[SPI_MODE_0] = ar71xx_spi_txrx_mode0; - sp->bitbang.setup_transfer = spi_bitbang_setup_transfer; - - sp->get_ioc_base = ar71xx_spi_get_ioc_base; - if (pdata) { - sp->bitbang.master->bus_num = pdata->bus_num; - sp->bitbang.master->num_chipselect = pdata->num_chipselect; - if (pdata->get_ioc_base) - sp->get_ioc_base = pdata->get_ioc_base; - } else { - sp->bitbang.master->bus_num = 0; - sp->bitbang.master->num_chipselect = 3; - } - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - ret = -ENOENT; - goto err1; - } - - sp->base = ioremap_nocache(r->start, r->end - r->start + 1); - if (!sp->base) { - ret = -ENXIO; - goto err1; - } - - ar71xx_spi_setup_regs(sp); - - ret = spi_bitbang_start(&sp->bitbang); - if (!ret) - return 0; - - ar71xx_spi_restore_regs(sp); - iounmap(sp->base); -err1: - platform_set_drvdata(pdev, NULL); - spi_master_put(sp->bitbang.master); - - return ret; -} - -static int ar71xx_spi_remove(struct platform_device *pdev) -{ - struct ar71xx_spi *sp = platform_get_drvdata(pdev); - - spi_bitbang_stop(&sp->bitbang); - ar71xx_spi_restore_regs(sp); - iounmap(sp->base); - platform_set_drvdata(pdev, NULL); - spi_master_put(sp->bitbang.master); - - return 0; -} - -static void ar71xx_spi_shutdown(struct platform_device *pdev) -{ - int ret; - - ret = ar71xx_spi_remove(pdev); - if (ret) - dev_err(&pdev->dev, "shutdown failed with %d\n", ret); -} - -static struct platform_driver ar71xx_spi_drv = { - .probe = ar71xx_spi_probe, - .remove = ar71xx_spi_remove, - .shutdown = ar71xx_spi_shutdown, - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init ar71xx_spi_init(void) -{ - printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n"); - return platform_driver_register(&ar71xx_spi_drv); -} -module_init(ar71xx_spi_init); - -static void __exit ar71xx_spi_exit(void) -{ - platform_driver_unregister(&ar71xx_spi_drv); -} -module_exit(ar71xx_spi_exit); - -MODULE_ALIAS("platform:" DRV_NAME); -MODULE_DESCRIPTION(DRV_DESC); -MODULE_VERSION(DRV_VERSION); -MODULE_AUTHOR("Gabor Juhos "); -MODULE_AUTHOR("Imre Kaloz "); -MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ar71xx/files-2.6.39/drivers/spi/pb44_spi.c b/target/linux/ar71xx/files-2.6.39/drivers/spi/pb44_spi.c deleted file mode 100644 index 556c7717c8..0000000000 --- a/target/linux/ar71xx/files-2.6.39/drivers/spi/pb44_spi.c +++ /dev/null @@ -1,316 +0,0 @@ -/* - * Atheros PB44 board SPI controller driver - * - * Copyright (C) 2009 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define DRV_DESC "Atheros PB44 SPI Controller driver" -#define DRV_VERSION "0.1.0" -#define DRV_NAME "pb44-spi" - -#undef PER_BIT_READ - -struct ar71xx_spi { - struct spi_bitbang bitbang; - u32 ioc_base; - u32 reg_ctrl; - - void __iomem *base; - - struct platform_device *pdev; -}; - -static inline u32 pb44_spi_rr(struct ar71xx_spi *sp, unsigned reg) -{ - return __raw_readl(sp->base + reg); -} - -static inline void pb44_spi_wr(struct ar71xx_spi *sp, unsigned reg, u32 val) -{ - __raw_writel(val, sp->base + reg); -} - -static inline struct ar71xx_spi *spidev_to_sp(struct spi_device *spi) -{ - return spi_master_get_devdata(spi->master); -} - -static void pb44_spi_chipselect(struct spi_device *spi, int is_active) -{ - struct ar71xx_spi *sp = spidev_to_sp(spi); - int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active; - - if (is_active) { - /* set initial clock polarity */ - if (spi->mode & SPI_CPOL) - sp->ioc_base |= SPI_IOC_CLK; - else - sp->ioc_base &= ~SPI_IOC_CLK; - - pb44_spi_wr(sp, SPI_REG_IOC, sp->ioc_base); - } - - if (spi->chip_select) { - unsigned long gpio = (unsigned long) spi->controller_data; - - /* SPI is normally active-low */ - gpio_set_value(gpio, cs_high); - } else { - if (cs_high) - sp->ioc_base |= SPI_IOC_CS0; - else - sp->ioc_base &= ~SPI_IOC_CS0; - - pb44_spi_wr(sp, SPI_REG_IOC, sp->ioc_base); - } - -} - -static void pb44_spi_enable(struct ar71xx_spi *sp) -{ - /* enable GPIO mode */ - pb44_spi_wr(sp, SPI_REG_FS, SPI_FS_GPIO); - - /* save CTRL register */ - sp->reg_ctrl = pb44_spi_rr(sp, SPI_REG_CTRL); - sp->ioc_base = pb44_spi_rr(sp, SPI_REG_IOC); - - pb44_spi_wr(sp, SPI_REG_CTRL, 0x43); -} - -static void pb44_spi_disable(struct ar71xx_spi *sp) -{ - /* restore CTRL register */ - pb44_spi_wr(sp, SPI_REG_CTRL, sp->reg_ctrl); - /* disable GPIO mode */ - pb44_spi_wr(sp, SPI_REG_FS, 0); -} - -static int pb44_spi_setup_cs(struct spi_device *spi) -{ - struct ar71xx_spi *sp = spidev_to_sp(spi); - - if (spi->chip_select) { - unsigned long gpio = (unsigned long) spi->controller_data; - int status = 0; - - status = gpio_request(gpio, dev_name(&spi->dev)); - if (status) - return status; - - status = gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH); - if (status) { - gpio_free(gpio); - return status; - } - } else { - if (spi->mode & SPI_CS_HIGH) - sp->ioc_base |= SPI_IOC_CS0; - else - sp->ioc_base &= ~SPI_IOC_CS0; - pb44_spi_wr(sp, SPI_REG_IOC, sp->ioc_base); - } - - return 0; -} - -static void pb44_spi_cleanup_cs(struct spi_device *spi) -{ - if (spi->chip_select) { - unsigned long gpio = (unsigned long) spi->controller_data; - gpio_free(gpio); - } -} - -static int pb44_spi_setup(struct spi_device *spi) -{ - int status = 0; - - if (spi->bits_per_word > 32) - return -EINVAL; - - if (!spi->controller_state) { - status = pb44_spi_setup_cs(spi); - if (status) - return status; - } - - status = spi_bitbang_setup(spi); - if (status && !spi->controller_state) - pb44_spi_cleanup_cs(spi); - - return status; -} - -static void pb44_spi_cleanup(struct spi_device *spi) -{ - pb44_spi_cleanup_cs(spi); - spi_bitbang_cleanup(spi); -} - -static u32 pb44_spi_txrx_mode0(struct spi_device *spi, unsigned nsecs, - u32 word, u8 bits) -{ - struct ar71xx_spi *sp = spidev_to_sp(spi); - u32 ioc = sp->ioc_base; - u32 ret; - - /* clock starts at inactive polarity */ - for (word <<= (32 - bits); likely(bits); bits--) { - u32 out; - - if (word & (1 << 31)) - out = ioc | SPI_IOC_DO; - else - out = ioc & ~SPI_IOC_DO; - - /* setup MSB (to slave) on trailing edge */ - pb44_spi_wr(sp, SPI_REG_IOC, out); - pb44_spi_wr(sp, SPI_REG_IOC, out | SPI_IOC_CLK); - - word <<= 1; - -#ifdef PER_BIT_READ - /* sample MSB (from slave) on leading edge */ - ret = pb44_spi_rr(sp, SPI_REG_RDS); - pb44_spi_wr(sp, SPI_REG_IOC, out); -#endif - } - -#ifndef PER_BIT_READ - ret = pb44_spi_rr(sp, SPI_REG_RDS); -#endif - return ret; -} - -static int pb44_spi_probe(struct platform_device *pdev) -{ - struct spi_master *master; - struct ar71xx_spi *sp; - struct ar71xx_spi_platform_data *pdata; - struct resource *r; - int ret; - - master = spi_alloc_master(&pdev->dev, sizeof(*sp)); - if (master == NULL) { - dev_err(&pdev->dev, "failed to allocate spi master\n"); - return -ENOMEM; - } - - sp = spi_master_get_devdata(master); - platform_set_drvdata(pdev, sp); - - pdata = pdev->dev.platform_data; - - master->setup = pb44_spi_setup; - master->cleanup = pb44_spi_cleanup; - if (pdata) { - master->bus_num = pdata->bus_num; - master->num_chipselect = pdata->num_chipselect; - } else { - master->bus_num = 0; - master->num_chipselect = 1; - } - - sp->bitbang.master = spi_master_get(master); - sp->bitbang.chipselect = pb44_spi_chipselect; - sp->bitbang.txrx_word[SPI_MODE_0] = pb44_spi_txrx_mode0; - sp->bitbang.setup_transfer = spi_bitbang_setup_transfer; - sp->bitbang.flags = SPI_CS_HIGH; - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - ret = -ENOENT; - goto err1; - } - - sp->base = ioremap_nocache(r->start, r->end - r->start + 1); - if (!sp->base) { - ret = -ENXIO; - goto err1; - } - - pb44_spi_enable(sp); - - ret = spi_bitbang_start(&sp->bitbang); - if (!ret) - return 0; - - pb44_spi_disable(sp); - iounmap(sp->base); -err1: - platform_set_drvdata(pdev, NULL); - spi_master_put(sp->bitbang.master); - - return ret; -} - -static int pb44_spi_remove(struct platform_device *pdev) -{ - struct ar71xx_spi *sp = platform_get_drvdata(pdev); - - spi_bitbang_stop(&sp->bitbang); - pb44_spi_disable(sp); - iounmap(sp->base); - platform_set_drvdata(pdev, NULL); - spi_master_put(sp->bitbang.master); - - return 0; -} - -static void pb44_spi_shutdown(struct platform_device *pdev) -{ - int ret; - - ret = pb44_spi_remove(pdev); - if (ret) - dev_err(&pdev->dev, "shutdown failed with %d\n", ret); -} - -static struct platform_driver pb44_spi_drv = { - .probe = pb44_spi_probe, - .remove = pb44_spi_remove, - .shutdown = pb44_spi_shutdown, - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init pb44_spi_init(void) -{ - return platform_driver_register(&pb44_spi_drv); -} -module_init(pb44_spi_init); - -static void __exit pb44_spi_exit(void) -{ - platform_driver_unregister(&pb44_spi_drv); -} -module_exit(pb44_spi_exit); - -MODULE_ALIAS("platform:" DRV_NAME); -MODULE_DESCRIPTION(DRV_DESC); -MODULE_VERSION(DRV_VERSION); -MODULE_AUTHOR("Gabor Juhos "); -MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ar71xx/files-2.6.39/drivers/tty/serial/ar933x_uart.c b/target/linux/ar71xx/files-2.6.39/drivers/tty/serial/ar933x_uart.c deleted file mode 100644 index 6aca24f36d..0000000000 --- a/target/linux/ar71xx/files-2.6.39/drivers/tty/serial/ar933x_uart.c +++ /dev/null @@ -1,688 +0,0 @@ -/* - * Atheros AR933X SoC built-in UART driver - * - * Copyright (C) 2011 Gabor Juhos - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define DRIVER_NAME "ar933x-uart" - -#define AR933X_DUMMY_STATUS_RD 0x01 - -static struct uart_driver ar933x_uart_driver; - -struct ar933x_uart_port { - struct uart_port port; - unsigned int ier; /* shadow Interrupt Enable Register */ -}; - -static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up, - int offset) -{ - return readl(up->port.membase + offset); -} - -static inline void ar933x_uart_write(struct ar933x_uart_port *up, - int offset, unsigned int value) -{ - writel(value, up->port.membase + offset); -} - -static inline void ar933x_uart_rmw(struct ar933x_uart_port *up, - unsigned int offset, - unsigned int mask, - unsigned int val) -{ - unsigned int t; - - t = ar933x_uart_read(up, offset); - t &= ~mask; - t |= val; - ar933x_uart_write(up, offset, t); -} - -static inline void ar933x_uart_rmw_set(struct ar933x_uart_port *up, - unsigned int offset, - unsigned int val) -{ - ar933x_uart_rmw(up, offset, 0, val); -} - -static inline void ar933x_uart_rmw_clear(struct ar933x_uart_port *up, - unsigned int offset, - unsigned int val) -{ - ar933x_uart_rmw(up, offset, val, 0); -} - -static inline void ar933x_uart_start_tx_interrupt(struct ar933x_uart_port *up) -{ - up->ier |= AR933X_UART_INT_TX_EMPTY; - ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); -} - -static inline void ar933x_uart_stop_tx_interrupt(struct ar933x_uart_port *up) -{ - up->ier &= ~AR933X_UART_INT_TX_EMPTY; - ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); -} - -static inline void ar933x_uart_putc(struct ar933x_uart_port *up, int ch) -{ - unsigned int rdata; - - rdata = ch & AR933X_UART_DATA_TX_RX_MASK; - rdata |= AR933X_UART_DATA_TX_CSR; - ar933x_uart_write(up, AR933X_UART_DATA_REG, rdata); -} - -static unsigned int ar933x_uart_tx_empty(struct uart_port *port) -{ - struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; - unsigned long flags; - unsigned int rdata; - - spin_lock_irqsave(&up->port.lock, flags); - rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG); - spin_unlock_irqrestore(&up->port.lock, flags); - - return (rdata & AR933X_UART_DATA_TX_CSR) ? 0 : TIOCSER_TEMT; -} - -static unsigned int ar933x_uart_get_mctrl(struct uart_port *port) -{ - return TIOCM_CAR; -} - -static void ar933x_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -} - -static void ar933x_uart_start_tx(struct uart_port *port) -{ - struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; - - ar933x_uart_start_tx_interrupt(up); -} - -static void ar933x_uart_stop_tx(struct uart_port *port) -{ - struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; - - ar933x_uart_stop_tx_interrupt(up); -} - -static void ar933x_uart_stop_rx(struct uart_port *port) -{ - struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; - - up->ier &= ~AR933X_UART_INT_RX_VALID; - ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); -} - -static void ar933x_uart_break_ctl(struct uart_port *port, int break_state) -{ - struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - if (break_state == -1) - ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, - AR933X_UART_CS_TX_BREAK); - else - ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG, - AR933X_UART_CS_TX_BREAK); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static void ar933x_uart_enable_ms(struct uart_port *port) -{ -} - -static void ar933x_uart_set_termios(struct uart_port *port, - struct ktermios *new, - struct ktermios *old) -{ - struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; - unsigned int cs; - unsigned long flags; - unsigned int baud, scale; - - /* Only CS8 is supported */ - new->c_cflag &= ~CSIZE; - new->c_cflag |= CS8; - - /* Only one stop bit is supported */ - new->c_cflag &= ~CSTOPB; - - cs = 0; - if (new->c_cflag & PARENB) { - if (!(new->c_cflag & PARODD)) - cs |= AR933X_UART_CS_PARITY_EVEN; - else - cs |= AR933X_UART_CS_PARITY_ODD; - } else { - cs |= AR933X_UART_CS_PARITY_NONE; - } - - /* Mark/space parity is not supported */ - new->c_cflag &= ~CMSPAR; - - baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); - scale = (port->uartclk / (16 * baud)) - 1; - - /* - * Ok, we're now changing the port state. Do it with - * interrupts disabled. - */ - spin_lock_irqsave(&up->port.lock, flags); - - /* Update the per-port timeout. */ - uart_update_timeout(port, new->c_cflag, baud); - - up->port.ignore_status_mask = 0; - - /* ignore all characters if CREAD is not set */ - if ((new->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= AR933X_DUMMY_STATUS_RD; - - ar933x_uart_write(up, AR933X_UART_CLOCK_REG, - scale << AR933X_UART_CLOCK_SCALE_S | 8192); - - /* setup configuration register */ - ar933x_uart_rmw(up, AR933X_UART_CS_REG, AR933X_UART_CS_PARITY_M, cs); - - /* enable host interrupt */ - ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, - AR933X_UART_CS_HOST_INT_EN); - - spin_unlock_irqrestore(&up->port.lock, flags); - - if (tty_termios_baud_rate(new)) - tty_termios_encode_baud_rate(new, baud, baud); -} - -static void ar933x_uart_rx_chars(struct ar933x_uart_port *up) -{ - struct tty_struct *tty; - int max_count = 256; - - tty = tty_port_tty_get(&up->port.state->port); - do { - unsigned int rdata; - unsigned char ch; - - rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG); - if ((rdata & AR933X_UART_DATA_RX_CSR) == 0) - break; - - /* remove the character from the FIFO */ - ar933x_uart_write(up, AR933X_UART_DATA_REG, - AR933X_UART_DATA_RX_CSR); - - if (!tty) { - /* discard the data if no tty available */ - continue; - } - - up->port.icount.rx++; - ch = rdata & AR933X_UART_DATA_TX_RX_MASK; - - if (uart_handle_sysrq_char(&up->port, ch)) - continue; - - if ((up->port.ignore_status_mask & AR933X_DUMMY_STATUS_RD) == 0) - tty_insert_flip_char(tty, ch, TTY_NORMAL); - } while (max_count-- > 0); - - if (tty) { - tty_flip_buffer_push(tty); - tty_kref_put(tty); - } -} - -static void ar933x_uart_tx_chars(struct ar933x_uart_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - int count; - - if (uart_tx_stopped(&up->port)) - return; - - count = up->port.fifosize; - do { - unsigned int rdata; - - rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG); - if ((rdata & AR933X_UART_DATA_TX_CSR) == 0) - break; - - if (up->port.x_char) { - ar933x_uart_putc(up, up->port.x_char); - up->port.icount.tx++; - up->port.x_char = 0; - continue; - } - - if (uart_circ_empty(xmit)) - break; - - ar933x_uart_putc(up, xmit->buf[xmit->tail]); - - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - if (!uart_circ_empty(xmit)) - ar933x_uart_start_tx_interrupt(up); -} - -static irqreturn_t ar933x_uart_interrupt(int irq, void *dev_id) -{ - struct ar933x_uart_port *up = dev_id; - unsigned int status; - - status = ar933x_uart_read(up, AR933X_UART_CS_REG); - if ((status & AR933X_UART_CS_HOST_INT) == 0) - return IRQ_NONE; - - spin_lock(&up->port.lock); - - status = ar933x_uart_read(up, AR933X_UART_INT_REG); - status &= ar933x_uart_read(up, AR933X_UART_INT_EN_REG); - - if (status & AR933X_UART_INT_RX_VALID) { - ar933x_uart_write(up, AR933X_UART_INT_REG, - AR933X_UART_INT_RX_VALID); - ar933x_uart_rx_chars(up); - } - - if (status & AR933X_UART_INT_TX_EMPTY) { - ar933x_uart_write(up, AR933X_UART_INT_REG, - AR933X_UART_INT_TX_EMPTY); - ar933x_uart_stop_tx_interrupt(up); - ar933x_uart_tx_chars(up); - } - - spin_unlock(&up->port.lock); - - return IRQ_HANDLED; -} - -static int ar933x_uart_startup(struct uart_port *port) -{ - struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; - unsigned long flags; - int ret; - - ret = request_irq(up->port.irq, ar933x_uart_interrupt, - up->port.irqflags, dev_name(up->port.dev), up); - if (ret) - return ret; - - spin_lock_irqsave(&up->port.lock, flags); - - /* Enable HOST interrupts */ - ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, - AR933X_UART_CS_HOST_INT_EN); - - /* Enable RX interrupts */ - up->ier = AR933X_UART_INT_RX_VALID; - ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); - - spin_unlock_irqrestore(&up->port.lock, flags); - - return 0; -} - -static void ar933x_uart_shutdown(struct uart_port *port) -{ - struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; - - /* Disable all interrupts */ - up->ier = 0; - ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); - - /* Disable break condition */ - ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG, - AR933X_UART_CS_TX_BREAK); - - free_irq(up->port.irq, up); -} - -static const char *ar933x_uart_type(struct uart_port *port) -{ - return (port->type == PORT_AR933X) ? "AR933X UART" : NULL; -} - -static void ar933x_uart_release_port(struct uart_port *port) -{ - /* Nothing to release ... */ -} - -static int ar933x_uart_request_port(struct uart_port *port) -{ - /* UARTs always present */ - return 0; -} - -static void ar933x_uart_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) - port->type = PORT_AR933X; -} - -static int ar933x_uart_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - if (ser->type != PORT_UNKNOWN && - ser->type != PORT_AR933X) - return -EINVAL; - - if (ser->irq < 0 || ser->irq >= NR_IRQS) - return -EINVAL; - - if (ser->baud_base < 28800) - return -EINVAL; - - return 0; -} - -static struct uart_ops ar933x_uart_ops = { - .tx_empty = ar933x_uart_tx_empty, - .set_mctrl = ar933x_uart_set_mctrl, - .get_mctrl = ar933x_uart_get_mctrl, - .stop_tx = ar933x_uart_stop_tx, - .start_tx = ar933x_uart_start_tx, - .stop_rx = ar933x_uart_stop_rx, - .enable_ms = ar933x_uart_enable_ms, - .break_ctl = ar933x_uart_break_ctl, - .startup = ar933x_uart_startup, - .shutdown = ar933x_uart_shutdown, - .set_termios = ar933x_uart_set_termios, - .type = ar933x_uart_type, - .release_port = ar933x_uart_release_port, - .request_port = ar933x_uart_request_port, - .config_port = ar933x_uart_config_port, - .verify_port = ar933x_uart_verify_port, -}; - -#ifdef CONFIG_SERIAL_AR933X_CONSOLE - -static struct ar933x_uart_port * -ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS]; - -static void ar933x_uart_wait_xmitr(struct ar933x_uart_port *up) -{ - unsigned int status; - unsigned int timeout = 60000; - - /* Wait up to 60ms for the character(s) to be sent. */ - do { - status = ar933x_uart_read(up, AR933X_UART_DATA_REG); - if (--timeout == 0) - break; - udelay(1); - } while ((status & AR933X_UART_DATA_TX_CSR) == 0); -} - -static void ar933x_uart_console_putchar(struct uart_port *port, int ch) -{ - struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; - - ar933x_uart_wait_xmitr(up); - ar933x_uart_putc(up, ch); -} - -static void ar933x_uart_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct ar933x_uart_port *up = ar933x_console_ports[co->index]; - unsigned long flags; - unsigned int int_en; - int locked = 1; - - local_irq_save(flags); - - if (up->port.sysrq) - locked = 0; - else if (oops_in_progress) - locked = spin_trylock(&up->port.lock); - else - spin_lock(&up->port.lock); - - /* - * First save the IER then disable the interrupts - */ - int_en = ar933x_uart_read(up, AR933X_UART_INT_EN_REG); - ar933x_uart_write(up, AR933X_UART_INT_EN_REG, 0); - - uart_console_write(&up->port, s, count, ar933x_uart_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - ar933x_uart_wait_xmitr(up); - ar933x_uart_write(up, AR933X_UART_INT_EN_REG, int_en); - - ar933x_uart_write(up, AR933X_UART_INT_REG, AR933X_UART_INT_ALLINTS); - - if (locked) - spin_unlock(&up->port.lock); - - local_irq_restore(flags); -} - -static int ar933x_uart_console_setup(struct console *co, char *options) -{ - struct ar933x_uart_port *up; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (co->index < 0 || co->index >= CONFIG_SERIAL_AR933X_NR_UARTS) - return -EINVAL; - - up = ar933x_console_ports[co->index]; - if (!up) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&up->port, co, baud, parity, bits, flow); -} - -static struct console ar933x_uart_console = { - .name = "ttyATH", - .write = ar933x_uart_console_write, - .device = uart_console_device, - .setup = ar933x_uart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &ar933x_uart_driver, -}; - -static void ar933x_uart_add_console_port(struct ar933x_uart_port *up) -{ - ar933x_console_ports[up->port.line] = up; -} - -#define AR933X_SERIAL_CONSOLE (&ar933x_uart_console) - -#else - -static inline void ar933x_uart_add_console_port(struct ar933x_uart_port *up) {} - -#define AR933X_SERIAL_CONSOLE NULL - -#endif /* CONFIG_SERIAL_AR933X_CONSOLE */ - -static struct uart_driver ar933x_uart_driver = { - .owner = THIS_MODULE, - .driver_name = DRIVER_NAME, - .dev_name = "ttyATH", - .nr = CONFIG_SERIAL_AR933X_NR_UARTS, - .cons = AR933X_SERIAL_CONSOLE, -}; - -static int __devinit ar933x_uart_probe(struct platform_device *pdev) -{ - struct ar933x_uart_platform_data *pdata; - struct ar933x_uart_port *up; - struct uart_port *port; - struct resource *mem_res; - struct resource *irq_res; - int id; - int ret; - - pdata = pdev->dev.platform_data; - if (!pdata) - return -EINVAL; - - id = pdev->id; - if (id == -1) - id = 0; - - if (id > CONFIG_SERIAL_AR933X_NR_UARTS) - return -EINVAL; - - mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem_res) { - dev_err(&pdev->dev, "no MEM resource\n"); - return -EINVAL; - } - - irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!irq_res) { - dev_err(&pdev->dev, "no IRQ resource\n"); - return -EINVAL; - } - - up = kzalloc(sizeof(struct ar933x_uart_port), GFP_KERNEL); - if (!up) - return -ENOMEM; - - port = &up->port; - port->mapbase = mem_res->start; - - port->membase = ioremap(mem_res->start, AR933X_UART_REGS_SIZE); - if (!port->membase) { - ret = -ENOMEM; - goto err_free_up; - } - - port->line = id; - port->irq = irq_res->start; - port->dev = &pdev->dev; - port->type = PORT_AR933X; - port->iotype = UPIO_MEM32; - port->uartclk = pdata->uartclk; - - port->regshift = 2; - port->fifosize = AR933X_UART_FIFO_SIZE; - port->ops = &ar933x_uart_ops; - - ar933x_uart_add_console_port(up); - - ret = uart_add_one_port(&ar933x_uart_driver, &up->port); - if (ret) - goto err_unmap; - - platform_set_drvdata(pdev, up); - return 0; - -err_unmap: - iounmap(up->port.membase); -err_free_up: - kfree(up); - return ret; -} - -static int __devexit ar933x_uart_remove(struct platform_device *pdev) -{ - struct ar933x_uart_port *up; - - up = platform_get_drvdata(pdev); - platform_set_drvdata(pdev, NULL); - - if (up) { - uart_remove_one_port(&ar933x_uart_driver, &up->port); - iounmap(up->port.membase); - kfree(up); - } - - return 0; -} - -static struct platform_driver ar933x_uart_platform_driver = { - .probe = ar933x_uart_probe, - .remove = __devexit_p(ar933x_uart_remove), - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init ar933x_uart_init(void) -{ - int ret; - - ar933x_uart_driver.nr = CONFIG_SERIAL_AR933X_NR_UARTS; - ret = uart_register_driver(&ar933x_uart_driver); - if (ret) - goto err_out; - - ret = platform_driver_register(&ar933x_uart_platform_driver); - if (ret) - goto err_unregister_uart_driver; - - return 0; - -err_unregister_uart_driver: - uart_unregister_driver(&ar933x_uart_driver); -err_out: - return ret; -} - -static void __exit ar933x_uart_exit(void) -{ - platform_driver_unregister(&ar933x_uart_platform_driver); - uart_unregister_driver(&ar933x_uart_driver); -} - -module_init(ar933x_uart_init); -module_exit(ar933x_uart_exit); - -MODULE_DESCRIPTION("Atheros AR933X UART driver"); -MODULE_AUTHOR("Gabor Juhos "); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/target/linux/ar71xx/files-2.6.39/drivers/usb/host/ehci-ar71xx.c b/target/linux/ar71xx/files-2.6.39/drivers/usb/host/ehci-ar71xx.c deleted file mode 100644 index b08db5baf6..0000000000 --- a/target/linux/ar71xx/files-2.6.39/drivers/usb/host/ehci-ar71xx.c +++ /dev/null @@ -1,242 +0,0 @@ -/* - * Bus Glue for Atheros AR71xx built-in EHCI controller. - * - * Copyright (C) 2008-2010 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Parts of this file are based on Atheros' 2.6.15 BSP - * Copyright (C) 2007 Atheros Communications, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include - -#include - -extern int usb_disabled(void); - -static int ehci_ar71xx_init(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int ret; - - ehci->caps = hcd->regs; - ehci->regs = hcd->regs + - HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - - ehci->sbrn = 0x20; - ehci->has_synopsys_hc_bug = 1; - - ehci_reset(ehci); - - ret = ehci_init(hcd); - if (ret) - return ret; - - ehci_port_power(ehci, 0); - - return 0; -} - -static int ehci_ar91xx_init(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int ret; - - ehci->caps = hcd->regs + 0x100; - ehci->regs = hcd->regs + 0x100 + - HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - - hcd->has_tt = 1; - ehci->sbrn = 0x20; - - ehci_reset(ehci); - - ret = ehci_init(hcd); - if (ret) - return ret; - - ehci_port_power(ehci, 0); - - return 0; -} - -static int ehci_ar71xx_probe(const struct hc_driver *driver, - struct usb_hcd **hcd_out, - struct platform_device *pdev) -{ - struct usb_hcd *hcd; - struct resource *res; - int irq; - int ret; - - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { - dev_dbg(&pdev->dev, "no IRQ specified for %s\n", - dev_name(&pdev->dev)); - return -ENODEV; - } - irq = res->start; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_dbg(&pdev->dev, "no base address specified for %s\n", - dev_name(&pdev->dev)); - return -ENODEV; - } - - hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); - if (!hcd) - return -ENOMEM; - - hcd->rsrc_start = res->start; - hcd->rsrc_len = res->end - res->start + 1; - - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - dev_dbg(&pdev->dev, "controller already in use\n"); - ret = -EBUSY; - goto err_put_hcd; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - dev_dbg(&pdev->dev, "error mapping memory\n"); - ret = -EFAULT; - goto err_release_region; - } - - ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); - if (ret) - goto err_iounmap; - - return 0; - -err_iounmap: - iounmap(hcd->regs); - -err_release_region: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -err_put_hcd: - usb_put_hcd(hcd); - return ret; -} - -static void ehci_ar71xx_remove(struct usb_hcd *hcd, - struct platform_device *pdev) -{ - usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - usb_put_hcd(hcd); -} - -static const struct hc_driver ehci_ar71xx_hc_driver = { - .description = hcd_name, - .product_desc = "Atheros AR71xx built-in EHCI controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - .reset = ehci_ar71xx_init, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - .get_frame_number = ehci_get_frame, - - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, -#ifdef CONFIG_PM - .hub_suspend = ehci_hub_suspend, - .hub_resume = ehci_hub_resume, -#endif - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - -static const struct hc_driver ehci_ar91xx_hc_driver = { - .description = hcd_name, - .product_desc = "Atheros AR91xx built-in EHCI controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - .reset = ehci_ar91xx_init, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - .get_frame_number = ehci_get_frame, - - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, -#ifdef CONFIG_PM - .hub_suspend = ehci_hub_suspend, - .hub_resume = ehci_hub_resume, -#endif - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - -static int ehci_ar71xx_driver_probe(struct platform_device *pdev) -{ - struct ar71xx_ehci_platform_data *pdata; - struct usb_hcd *hcd = NULL; - int ret; - - if (usb_disabled()) - return -ENODEV; - - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "no platform data specified for %s\n", - dev_name(&pdev->dev)); - return -ENODEV; - } - - if (pdata->is_ar91xx) - ret = ehci_ar71xx_probe(&ehci_ar91xx_hc_driver, &hcd, pdev); - else - ret = ehci_ar71xx_probe(&ehci_ar71xx_hc_driver, &hcd, pdev); - - return ret; -} - -static int ehci_ar71xx_driver_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - ehci_ar71xx_remove(hcd, pdev); - return 0; -} - -MODULE_ALIAS("platform:ar71xx-ehci"); - -static struct platform_driver ehci_ar71xx_driver = { - .probe = ehci_ar71xx_driver_probe, - .remove = ehci_ar71xx_driver_remove, - .driver = { - .name = "ar71xx-ehci", - } -}; diff --git a/target/linux/ar71xx/files-2.6.39/drivers/usb/host/ohci-ar71xx.c b/target/linux/ar71xx/files-2.6.39/drivers/usb/host/ohci-ar71xx.c deleted file mode 100644 index 1ab33f3bf4..0000000000 --- a/target/linux/ar71xx/files-2.6.39/drivers/usb/host/ohci-ar71xx.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * OHCI HCD (Host Controller Driver) for USB. - * - * Bus Glue for Atheros AR71xx built-in OHCI controller. - * - * Copyright (C) 2008 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Parts of this file are based on Atheros' 2.6.15 BSP - * Copyright (C) 2007 Atheros Communications, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include - -extern int usb_disabled(void); - -static int usb_hcd_ar71xx_probe(const struct hc_driver *driver, - struct platform_device *pdev) -{ - struct usb_hcd *hcd; - struct resource *res; - int irq; - int ret; - - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { - dev_dbg(&pdev->dev, "no IRQ specified for %s\n", - dev_name(&pdev->dev)); - return -ENODEV; - } - irq = res->start; - - hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); - if (!hcd) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_dbg(&pdev->dev, "no base address specified for %s\n", - dev_name(&pdev->dev)); - ret = -ENODEV; - goto err_put_hcd; - } - hcd->rsrc_start = res->start; - hcd->rsrc_len = res->end - res->start + 1; - - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - dev_dbg(&pdev->dev, "controller already in use\n"); - ret = -EBUSY; - goto err_put_hcd; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - dev_dbg(&pdev->dev, "error mapping memory\n"); - ret = -EFAULT; - goto err_release_region; - } - - ohci_hcd_init(hcd_to_ohci(hcd)); - - ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); - if (ret) - goto err_stop_hcd; - - return 0; - -err_stop_hcd: - iounmap(hcd->regs); -err_release_region: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -err_put_hcd: - usb_put_hcd(hcd); - return ret; -} - -void usb_hcd_ar71xx_remove(struct usb_hcd *hcd, struct platform_device *pdev) -{ - usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - usb_put_hcd(hcd); -} - -static int __devinit ohci_ar71xx_start(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - int ret; - - ret = ohci_init(ohci); - if (ret < 0) - return ret; - - ret = ohci_run(ohci); - if (ret < 0) - goto err; - - return 0; - -err: - ohci_stop(hcd); - return ret; -} - -static const struct hc_driver ohci_ar71xx_hc_driver = { - .description = hcd_name, - .product_desc = "Atheros AR71xx built-in OHCI controller", - .hcd_priv_size = sizeof(struct ohci_hcd), - - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - .start = ohci_ar71xx_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, - .start_port_reset = ohci_start_port_reset, -}; - -static int ohci_hcd_ar71xx_drv_probe(struct platform_device *pdev) -{ - if (usb_disabled()) - return -ENODEV; - - return usb_hcd_ar71xx_probe(&ohci_ar71xx_hc_driver, pdev); -} - -static int ohci_hcd_ar71xx_drv_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_hcd_ar71xx_remove(hcd, pdev); - return 0; -} - -MODULE_ALIAS("platform:ar71xx-ohci"); - -static struct platform_driver ohci_hcd_ar71xx_driver = { - .probe = ohci_hcd_ar71xx_drv_probe, - .remove = ohci_hcd_ar71xx_drv_remove, - .shutdown = usb_hcd_platform_shutdown, - .driver = { - .name = "ar71xx-ohci", - .owner = THIS_MODULE, - }, -}; diff --git a/target/linux/ar71xx/files-2.6.39/drivers/watchdog/ar71xx_wdt.c b/target/linux/ar71xx/files-2.6.39/drivers/watchdog/ar71xx_wdt.c deleted file mode 100644 index d5e1f8a3ca..0000000000 --- a/target/linux/ar71xx/files-2.6.39/drivers/watchdog/ar71xx_wdt.c +++ /dev/null @@ -1,305 +0,0 @@ -/* - * Driver for the Atheros AR71xx SoC's built-in hardware watchdog timer. - * - * Copyright (C) 2010-2011 Jaiganesh Narayanan - * Copyright (C) 2008 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Parts of this file are based on Atheros 2.6.31 BSP - * - * This driver was based on: drivers/watchdog/ixp4xx_wdt.c - * Author: Deepak Saxena - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * which again was based on sa1100 driver, - * Copyright (C) 2000 Oleg Drokin - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#define DRV_NAME "ar71xx-wdt" -#define DRV_DESC "Atheros AR71xx hardware watchdog driver" -#define DRV_VERSION "0.1.0" - -#define WDT_TIMEOUT 15 /* seconds */ - -static int nowayout = WATCHDOG_NOWAYOUT; - -#ifdef CONFIG_WATCHDOG_NOWAYOUT -module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " - "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -#endif - -static unsigned long wdt_flags; - -#define WDT_FLAGS_BUSY 0 -#define WDT_FLAGS_EXPECT_CLOSE 1 - -static int wdt_timeout = WDT_TIMEOUT; -static int boot_status; -static int max_timeout; -static u32 wdt_clk_freq; - -static inline void ar71xx_wdt_keepalive(void) -{ - ar71xx_reset_wr(AR71XX_RESET_REG_WDOG, wdt_clk_freq * wdt_timeout); -} - -static inline void ar71xx_wdt_enable(void) -{ - printk(KERN_DEBUG DRV_NAME ": enabling watchdog timer\n"); - ar71xx_wdt_keepalive(); - udelay(2); - ar71xx_reset_wr(AR71XX_RESET_REG_WDOG_CTRL, WDOG_CTRL_ACTION_FCR); -} - -static inline void ar71xx_wdt_disable(void) -{ - printk(KERN_DEBUG DRV_NAME ": disabling watchdog timer\n"); - ar71xx_reset_wr(AR71XX_RESET_REG_WDOG_CTRL, WDOG_CTRL_ACTION_NONE); -} - -static int ar71xx_wdt_set_timeout(int val) -{ - if (val < 1 || val > max_timeout) - return -EINVAL; - - wdt_timeout = val; - ar71xx_wdt_keepalive(); - - printk(KERN_DEBUG DRV_NAME ": timeout=%d secs\n", wdt_timeout); - - return 0; -} - -static int ar71xx_wdt_open(struct inode *inode, struct file *file) -{ - if (test_and_set_bit(WDT_FLAGS_BUSY, &wdt_flags)) - return -EBUSY; - - clear_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags); - - ar71xx_wdt_enable(); - - return nonseekable_open(inode, file); -} - -static int ar71xx_wdt_release(struct inode *inode, struct file *file) -{ - if (test_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags)) { - ar71xx_wdt_disable(); - } else { - printk(KERN_CRIT DRV_NAME ": device closed unexpectedly, " - "watchdog timer will not stop!\n"); - } - - clear_bit(WDT_FLAGS_BUSY, &wdt_flags); - clear_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags); - - return 0; -} - -static ssize_t ar71xx_wdt_write(struct file *file, const char *data, - size_t len, loff_t *ppos) -{ - if (len) { - if (!nowayout) { - size_t i; - - clear_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags); - - for (i = 0; i != len; i++) { - char c; - - if (get_user(c, data + i)) - return -EFAULT; - - if (c == 'V') - set_bit(WDT_FLAGS_EXPECT_CLOSE, - &wdt_flags); - } - } - - ar71xx_wdt_keepalive(); - } - - return len; -} - -static struct watchdog_info ar71xx_wdt_info = { - .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | - WDIOF_MAGICCLOSE | WDIOF_CARDRESET, - .firmware_version = 0, - .identity = "AR71XX watchdog", -}; - -static long ar71xx_wdt_ioctl(struct file *file, - unsigned int cmd, unsigned long arg) -{ - int t; - int ret; - - switch (cmd) { - case WDIOC_GETSUPPORT: - ret = copy_to_user((struct watchdog_info *)arg, - &ar71xx_wdt_info, - sizeof(ar71xx_wdt_info)) ? -EFAULT : 0; - break; - - case WDIOC_GETSTATUS: - ret = put_user(0, (int *)arg) ? -EFAULT : 0; - break; - - case WDIOC_GETBOOTSTATUS: - ret = put_user(boot_status, (int *)arg) ? -EFAULT : 0; - break; - - case WDIOC_KEEPALIVE: - ar71xx_wdt_keepalive(); - ret = 0; - break; - - case WDIOC_SETTIMEOUT: - ret = get_user(t, (int *)arg) ? -EFAULT : 0; - if (ret) - break; - - ret = ar71xx_wdt_set_timeout(t); - if (ret) - break; - - /* fallthrough */ - case WDIOC_GETTIMEOUT: - ret = put_user(wdt_timeout, (int *)arg) ? -EFAULT : 0; - break; - - default: - ret = -ENOTTY; - break; - } - - return ret; -} - -static const struct file_operations ar71xx_wdt_fops = { - .owner = THIS_MODULE, - .write = ar71xx_wdt_write, - .unlocked_ioctl = ar71xx_wdt_ioctl, - .open = ar71xx_wdt_open, - .release = ar71xx_wdt_release, -}; - -static struct miscdevice ar71xx_wdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &ar71xx_wdt_fops, -}; - -static int __devinit ar71xx_wdt_probe(struct platform_device *pdev) -{ - int ret; - - switch (ar71xx_soc) { - case AR71XX_SOC_AR7130: - case AR71XX_SOC_AR7141: - case AR71XX_SOC_AR7161: - case AR71XX_SOC_AR7240: - case AR71XX_SOC_AR7241: - case AR71XX_SOC_AR7242: - case AR71XX_SOC_AR9130: - case AR71XX_SOC_AR9132: - wdt_clk_freq = ar71xx_ahb_freq; - break; - - case AR71XX_SOC_AR9330: - case AR71XX_SOC_AR9331: - case AR71XX_SOC_AR9341: - case AR71XX_SOC_AR9342: - case AR71XX_SOC_AR9344: - wdt_clk_freq = ar71xx_ref_freq; - break; - - default: - BUG(); - } - - max_timeout = (0xfffffffful / wdt_clk_freq); - wdt_timeout = (max_timeout < WDT_TIMEOUT) ? max_timeout : WDT_TIMEOUT; - - if (ar71xx_reset_rr(AR71XX_RESET_REG_WDOG_CTRL) & WDOG_CTRL_LAST_RESET) - boot_status = WDIOF_CARDRESET; - - ret = misc_register(&ar71xx_wdt_miscdev); - if (ret) - goto err_out; - - printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n"); - - printk(KERN_DEBUG DRV_NAME ": timeout=%d secs (max=%d)\n", - wdt_timeout, max_timeout); - - return 0; - -err_out: - return ret; -} - -static int __devexit ar71xx_wdt_remove(struct platform_device *pdev) -{ - misc_deregister(&ar71xx_wdt_miscdev); - return 0; -} - -static void ar71xx_wdt_shutdown(struct platform_device *pdev) -{ - ar71xx_wdt_disable(); -} - -static struct platform_driver ar71xx_wdt_driver = { - .probe = ar71xx_wdt_probe, - .remove = __devexit_p(ar71xx_wdt_remove), - .shutdown = ar71xx_wdt_shutdown, - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init ar71xx_wdt_init(void) -{ - return platform_driver_register(&ar71xx_wdt_driver); -} -module_init(ar71xx_wdt_init); - -static void __exit ar71xx_wdt_exit(void) -{ - platform_driver_unregister(&ar71xx_wdt_driver); -} -module_exit(ar71xx_wdt_exit); - -MODULE_DESCRIPTION(DRV_DESC); -MODULE_VERSION(DRV_VERSION); -MODULE_AUTHOR("Gabor Juhos part_probes) -+ nr_parts = parse_mtd_partitions(&flash->mtd, -+ data->part_probes, &parts, 0); -+ - if (nr_parts <= 0 && data && data->parts) { - parts = data->parts; - nr_parts = data->nr_parts; ---- a/include/linux/spi/flash.h -+++ b/include/linux/spi/flash.h -@@ -24,6 +24,7 @@ struct flash_platform_data { - unsigned int nr_parts; - - char *type; -+ const char **part_probes; - - /* we'll likely add more ... use JEDEC IDs, etc */ - }; diff --git a/target/linux/ar71xx/patches-2.6.39/101-ksz8041_phy_driver.patch b/target/linux/ar71xx/patches-2.6.39/101-ksz8041_phy_driver.patch deleted file mode 100644 index 10905034f7..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/101-ksz8041_phy_driver.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -123,6 +123,11 @@ config RTL8306_PHY - tristate "Driver for Realtek RTL8306S switches" - select SWCONFIG - -+config MICREL_PHY -+ tristate "Drivers for Micrel/Kendin PHYs" -+ ---help--- -+ Currently has a driver for the KSZ8041 -+ - config FIXED_PHY - bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" - depends on PHYLIB=y ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -25,6 +25,7 @@ obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o - obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o - obj-$(CONFIG_RTL8367_PHY) += rtl8367.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o -+obj-$(CONFIG_MICREL_PHY) += micrel.o - obj-$(CONFIG_FIXED_PHY) += fixed.o - obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o - obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o diff --git a/target/linux/ar71xx/patches-2.6.39/107-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-2.6.39/107-mtd-SST39VF6401B-support.patch deleted file mode 100644 index 246abd5dc0..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/107-mtd-SST39VF6401B-support.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/drivers/mtd/chips/jedec_probe.c -+++ b/drivers/mtd/chips/jedec_probe.c -@@ -148,6 +148,7 @@ - #define SST39LF160 0x2782 - #define SST39VF1601 0x234b - #define SST39VF3201 0x235b -+#define SST39VF6401B 0x236d - #define SST39WF1601 0x274b - #define SST39WF1602 0x274a - #define SST39LF512 0x00D4 -@@ -1568,6 +1569,18 @@ static const struct amd_flash_info jedec - ERASEINFO(0x10000,64), - } - }, { -+ .mfr_id = CFI_MFR_SST, -+ .dev_id = SST39VF6401B, -+ .name = "SST 39VF6401B", -+ .devtypes = CFI_DEVICETYPE_X16, -+ .uaddr = MTD_UADDR_0xAAAA_0x5555, -+ .dev_size = SIZE_8MiB, -+ .cmd_set = P_ID_AMD_STD, -+ .nr_regions = 1, -+ .regions = { -+ ERASEINFO(0x10000,128) -+ } -+ }, { - .mfr_id = CFI_MFR_ST, - .dev_id = M29F800AB, - .name = "ST M29F800AB", diff --git a/target/linux/ar71xx/patches-2.6.39/108-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ar71xx/patches-2.6.39/108-mtd_fix_cfi_cmdset_0002_status_check.patch deleted file mode 100644 index 226f3b0914..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/108-mtd_fix_cfi_cmdset_0002_status_check.patch +++ /dev/null @@ -1,69 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -1219,8 +1219,8 @@ static int __xipram do_write_oneword(str - break; - } - -- if (chip_ready(map, adr)) -- break; -+ if (chip_good(map, adr, datum)) -+ goto enable_xip; - - /* Latency issues. Drop the lock, wait a while and retry */ - UDELAY(map, chip, adr, 1); -@@ -1236,6 +1236,8 @@ static int __xipram do_write_oneword(str - - ret = -EIO; - } -+ -+ enable_xip: - xip_enable(map, chip, adr); - op_done: - chip->state = FL_READY; -@@ -1567,7 +1569,6 @@ static int cfi_amdstd_write_buffers(stru - return 0; - } - -- - /* - * Handle devices with one erase region, that only implement - * the chip erase command. -@@ -1631,8 +1632,8 @@ static int __xipram do_erase_chip(struct - chip->erase_suspended = 0; - } - -- if (chip_ready(map, adr)) -- break; -+ if (chip_good(map, adr, map_word_ff(map))) -+ goto op_done; - - if (time_after(jiffies, timeo)) { - printk(KERN_WARNING "MTD %s(): software timeout\n", -@@ -1652,6 +1653,7 @@ static int __xipram do_erase_chip(struct - ret = -EIO; - } - -+ op_done: - chip->state = FL_READY; - xip_enable(map, chip, adr); - put_chip(map, chip, adr); -@@ -1719,9 +1721,9 @@ static int __xipram do_erase_oneblock(st - chip->erase_suspended = 0; - } - -- if (chip_ready(map, adr)) { -+ if (chip_good(map, adr, map_word_ff(map))) { - xip_enable(map, chip, adr); -- break; -+ goto op_done; - } - - if (time_after(jiffies, timeo)) { -@@ -1743,6 +1745,7 @@ static int __xipram do_erase_oneblock(st - ret = -EIO; - } - -+ op_done: - chip->state = FL_READY; - put_chip(map, chip, adr); - mutex_unlock(&chip->mutex); diff --git a/target/linux/ar71xx/patches-2.6.39/109-mtd-wrt160nl-trx-parser.patch b/target/linux/ar71xx/patches-2.6.39/109-mtd-wrt160nl-trx-parser.patch deleted file mode 100644 index ea7c66f4d3..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/109-mtd-wrt160nl-trx-parser.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -176,6 +176,12 @@ config MTD_AR7_PARTS - - endif # MTD_PARTITIONS - -+config MTD_WRT160NL_PARTS -+ tristate "Linksys WRT160NL partitioning support" -+ depends on MTD_PARTITIONS && AR71XX_MACH_WRT160NL -+ ---help--- -+ Linksys WRT160NL partitioning support -+ - config MTD_MYLOADER_PARTS - tristate "MyLoader partition parsing" - depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX) ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo - obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o - obj-$(CONFIG_MTD_AFS_PARTS) += afs.o - obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o -+obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o - obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o - - # 'Users' - code which presents functionality to userspace. diff --git a/target/linux/ar71xx/patches-2.6.39/110-usb-ehci-add-war-for-synopsys-hc-bug.patch b/target/linux/ar71xx/patches-2.6.39/110-usb-ehci-add-war-for-synopsys-hc-bug.patch deleted file mode 100644 index 499655903e..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/110-usb-ehci-add-war-for-synopsys-hc-bug.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/drivers/usb/host/ehci-q.c -+++ b/drivers/usb/host/ehci-q.c -@@ -1183,6 +1183,9 @@ static void end_unlink_async (struct ehc - ehci->reclaim = NULL; - start_unlink_async (ehci, next); - } -+ -+ if (ehci->has_synopsys_hc_bug) -+ writel((u32)ehci->async->qh_dma, &ehci->regs->async_next); - } - - /* makes sure the async qh will become idle */ ---- a/drivers/usb/host/ehci.h -+++ b/drivers/usb/host/ehci.h -@@ -135,6 +135,7 @@ struct ehci_hcd { /* one per controlle - unsigned fs_i_thresh:1; /* Intel iso scheduling */ - unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/ - unsigned ignore_oc:1; -+ unsigned has_synopsys_hc_bug:1; /* Synopsys HC */ - - /* required for usb32 quirk */ - #define OHCI_CTRL_HCFS (3 << 6) diff --git a/target/linux/ar71xx/patches-2.6.39/111-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-2.6.39/111-mtd-cfi_cmdset_0002-force-word-write.patch deleted file mode 100644 index ad9a837e8b..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/111-mtd-cfi_cmdset_0002-force-word-write.patch +++ /dev/null @@ -1,61 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -39,7 +39,7 @@ - #include - - #define AMD_BOOTLOC_BUG --#define FORCE_WORD_WRITE 0 -+#define FORCE_WORD_WRITE 1 - - #define MAX_WORD_RETRIES 3 - -@@ -50,7 +50,9 @@ - - static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); - static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -+#if !FORCE_WORD_WRITE - static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -+#endif - static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *); - static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *); - static void cfi_amdstd_sync (struct mtd_info *); -@@ -186,6 +188,7 @@ static void fixup_amd_bootblock(struct m - } - #endif - -+#if !FORCE_WORD_WRITE - static void fixup_use_write_buffers(struct mtd_info *mtd) - { - struct map_info *map = mtd->priv; -@@ -195,6 +198,7 @@ static void fixup_use_write_buffers(stru - mtd->write = cfi_amdstd_write_buffers; - } - } -+#endif /* !FORCE_WORD_WRITE */ - - /* Atmel chips don't use the same PRI format as AMD chips */ - static void fixup_convert_atmel_pri(struct mtd_info *mtd) -@@ -1379,6 +1383,7 @@ static int cfi_amdstd_write_words(struct - /* - * FIXME: interleaved mode not tested, and probably not supported! - */ -+#if !FORCE_WORD_WRITE - static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, - unsigned long adr, const u_char *buf, - int len) -@@ -1489,7 +1494,6 @@ static int __xipram do_write_buffer(stru - return ret; - } - -- - static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) - { -@@ -1568,6 +1572,7 @@ static int cfi_amdstd_write_buffers(stru - - return 0; - } -+#endif /* !FORCE_WORD_WRITE */ - - /* - * Handle devices with one erase region, that only implement diff --git a/target/linux/ar71xx/patches-2.6.39/112-mtd-tp-link-partition-parser.patch b/target/linux/ar71xx/patches-2.6.39/112-mtd-tp-link-partition-parser.patch deleted file mode 100644 index 90bdfc9d4c..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/112-mtd-tp-link-partition-parser.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -198,6 +198,12 @@ config MTD_MYLOADER_PARTS - You will still need the parsing functions to be called by the driver - for your particular device. It won't happen automatically. - -+config MTD_TPLINK_PARTS -+ tristate "TP-Link AR7XXX/AR9XXX partitioning support" -+ depends on MTD_PARTITIONS && ATHEROS_AR71XX -+ ---help--- -+ TBD. -+ - comment "User Modules And Translation Layers" - - config MTD_CHAR ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -14,6 +14,7 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o - obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o - obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o - obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o -+obj-$(CONFIG_MTD_TPLINK_PARTS) += tplinkpart.o - - # 'Users' - code which presents functionality to userspace. - obj-$(CONFIG_MTD_CHAR) += mtdchar.o diff --git a/target/linux/ar71xx/patches-2.6.39/113-mtd-m25p80-allow-to-specify-max-read-size.patch b/target/linux/ar71xx/patches-2.6.39/113-mtd-m25p80-allow-to-specify-max-read-size.patch deleted file mode 100644 index 8bb69df242..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/113-mtd-m25p80-allow-to-specify-max-read-size.patch +++ /dev/null @@ -1,112 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -94,6 +94,7 @@ struct m25p { - u16 addr_width; - u8 erase_opcode; - u8 *command; -+ size_t max_read_len; - }; - - static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd) -@@ -341,6 +342,7 @@ static int m25p80_read(struct mtd_info * - struct m25p *flash = mtd_to_m25p(mtd); - struct spi_transfer t[2]; - struct spi_message m; -+ loff_t ofs; - - DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n", - dev_name(&flash->spi->dev), __func__, "from", -@@ -364,8 +366,6 @@ static int m25p80_read(struct mtd_info * - t[0].len = m25p_cmdsz(flash) + FAST_READ_DUMMY_BYTE; - spi_message_add_tail(&t[0], &m); - -- t[1].rx_buf = buf; -- t[1].len = len; - spi_message_add_tail(&t[1], &m); - - /* Byte count starts at zero. */ -@@ -373,13 +373,6 @@ static int m25p80_read(struct mtd_info * - - mutex_lock(&flash->lock); - -- /* Wait till previous write/erase is done. */ -- if (wait_till_ready(flash)) { -- /* REVISIT status return?? */ -- mutex_unlock(&flash->lock); -- return 1; -- } -- - /* FIXME switch to OPCODE_FAST_READ. It's required for higher - * clocks; and at this writing, every chip this driver handles - * supports that opcode. -@@ -387,11 +380,44 @@ static int m25p80_read(struct mtd_info * - - /* Set up the write data buffer. */ - flash->command[0] = OPCODE_READ; -- m25p_addr2cmd(flash, from, flash->command); - -- spi_sync(flash->spi, &m); -+ ofs = 0; -+ while (len) { -+ size_t readlen; -+ size_t done; -+ int ret; -+ -+ ret = wait_till_ready(flash); -+ if (ret) { -+ mutex_unlock(&flash->lock); -+ return 1; -+ } -+ -+ if (flash->max_read_len > 0 && -+ flash->max_read_len < len) -+ readlen = flash->max_read_len; -+ else -+ readlen = len; -+ -+ t[1].rx_buf = buf + ofs; -+ t[1].len = readlen; -+ -+ m25p_addr2cmd(flash, from + ofs, flash->command); -+ -+ spi_sync(flash->spi, &m); - -- *retlen = m.actual_length - m25p_cmdsz(flash) - FAST_READ_DUMMY_BYTE; -+ done = m.actual_length - m25p_cmdsz(flash) - -+ FAST_READ_DUMMY_BYTE; -+ if (done != readlen) { -+ mutex_unlock(&flash->lock); -+ return 1; -+ } -+ -+ ofs += done; -+ len -= done; -+ } -+ -+ *retlen = ofs; - - mutex_unlock(&flash->lock); - -@@ -901,6 +927,12 @@ static int __devinit m25p_probe(struct s - flash->mtd.erase = m25p80_erase; - flash->mtd.read = m25p80_read; - -+ if (data && data->max_read_len) { -+ flash->max_read_len = data->max_read_len; -+ dev_warn(&spi->dev, "max_read_len set to %d bytes\n", -+ flash->max_read_len); -+ } -+ - /* sst flash chips use AAI word program */ - if (info->jedec_id >> 16 == 0xbf) - flash->mtd.write = sst_write; ---- a/include/linux/spi/flash.h -+++ b/include/linux/spi/flash.h -@@ -26,6 +26,7 @@ struct flash_platform_data { - char *type; - const char **part_probes; - -+ size_t max_read_len; - /* we'll likely add more ... use JEDEC IDs, etc */ - }; - diff --git a/target/linux/ar71xx/patches-2.6.39/120-dsa-trailer-tag-validation-fix.patch b/target/linux/ar71xx/patches-2.6.39/120-dsa-trailer-tag-validation-fix.patch deleted file mode 100644 index 3e3902bac0..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/120-dsa-trailer-tag-validation-fix.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/net/dsa/tag_trailer.c -+++ b/net/dsa/tag_trailer.c -@@ -87,7 +87,7 @@ static int trailer_rcv(struct sk_buff *s - - trailer = skb_tail_pointer(skb) - 4; - if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 || -- (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00) -+ (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00) - goto out_drop; - - source_port = trailer[1] & 7; diff --git a/target/linux/ar71xx/patches-2.6.39/121-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-2.6.39/121-dsa-add-88e6063-driver.patch deleted file mode 100644 index 1a11a69c6f..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/121-dsa-add-88e6063-driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/net/dsa/Kconfig -+++ b/net/dsa/Kconfig -@@ -36,6 +36,13 @@ config NET_DSA_MV88E6060 - This enables support for the Marvell 88E6060 ethernet switch - chip. - -+config NET_DSA_MV88E6063 -+ bool "Marvell 88E6063 ethernet switch chip support" -+ select NET_DSA_TAG_TRAILER -+ ---help--- -+ This enables support for the Marvell 88E6063 ethernet switch -+ chip -+ - config NET_DSA_MV88E6XXX_NEED_PPU - bool - default n ---- a/net/dsa/Makefile -+++ b/net/dsa/Makefile -@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag - # switch drivers - obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o - obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o -+obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o - obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o - obj-$(CONFIG_NET_DSA_MV88E6131) += mv88e6131.o - diff --git a/target/linux/ar71xx/patches-2.6.39/140-redboot_partition_scan.patch b/target/linux/ar71xx/patches-2.6.39/140-redboot_partition_scan.patch deleted file mode 100644 index a09271a069..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/140-redboot_partition_scan.patch +++ /dev/null @@ -1,54 +0,0 @@ ---- a/drivers/mtd/redboot.c -+++ b/drivers/mtd/redboot.c -@@ -78,31 +78,32 @@ static int parse_redboot_partitions(stru - static char nullstring[] = "unallocated"; - #endif - -+ buf = vmalloc(master->erasesize); -+ if (!buf) -+ return -ENOMEM; -+ -+ restart: - if ( directory < 0 ) { - offset = master->size + directory * master->erasesize; -- while (master->block_isbad && -+ while (master->block_isbad && - master->block_isbad(master, offset)) { - if (!offset) { - nogood: - printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n"); -+ vfree(buf); - return -EIO; - } - offset -= master->erasesize; - } - } else { - offset = directory * master->erasesize; -- while (master->block_isbad && -+ while (master->block_isbad && - master->block_isbad(master, offset)) { - offset += master->erasesize; - if (offset == master->size) - goto nogood; - } - } -- buf = vmalloc(master->erasesize); -- -- if (!buf) -- return -ENOMEM; -- - printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n", - master->name, offset); - -@@ -174,6 +175,11 @@ static int parse_redboot_partitions(stru - } - if (i == numslots) { - /* Didn't find it */ -+ if (offset + master->erasesize < master->size) { -+ /* not at the end of the flash yet, maybe next block :) */ -+ directory++; -+ goto restart; -+ } - printk(KERN_NOTICE "No RedBoot partition table detected in %s\n", - master->name); - ret = 0; diff --git a/target/linux/ar71xx/patches-2.6.39/150-drivers-link-spi-before-mtd.patch b/target/linux/ar71xx/patches-2.6.39/150-drivers-link-spi-before-mtd.patch deleted file mode 100644 index f72f8ad07f..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/150-drivers-link-spi-before-mtd.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/drivers/Makefile -+++ b/drivers/Makefile -@@ -46,8 +46,8 @@ obj-$(CONFIG_IDE) += ide/ - obj-$(CONFIG_SCSI) += scsi/ - obj-$(CONFIG_ATA) += ata/ - obj-$(CONFIG_TARGET_CORE) += target/ --obj-$(CONFIG_MTD) += mtd/ - obj-$(CONFIG_SPI) += spi/ -+obj-$(CONFIG_MTD) += mtd/ - obj-y += net/ - obj-$(CONFIG_ATM) += atm/ - obj-$(CONFIG_FUSION) += message/ diff --git a/target/linux/ar71xx/patches-2.6.39/151-spi-add-various-flags.patch b/target/linux/ar71xx/patches-2.6.39/151-spi-add-various-flags.patch deleted file mode 100644 index b51f68f3ca..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/151-spi-add-various-flags.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/include/linux/spi/spi.h -+++ b/include/linux/spi/spi.h -@@ -441,6 +441,8 @@ struct spi_transfer { - dma_addr_t rx_dma; - - unsigned cs_change:1; -+ unsigned verify:1; -+ unsigned fast_write:1; - u8 bits_per_word; - u16 delay_usecs; - u32 speed_hz; -@@ -482,6 +484,7 @@ struct spi_message { - struct spi_device *spi; - - unsigned is_dma_mapped:1; -+ unsigned fast_read:1; - - /* REVISIT: we might want a flag affecting the behavior of the - * last transfer ... allowing things like "read 16 bit length L" diff --git a/target/linux/ar71xx/patches-2.6.39/152-rb4xx-spi-driver.patch b/target/linux/ar71xx/patches-2.6.39/152-rb4xx-spi-driver.patch deleted file mode 100644 index 163d56d220..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/152-rb4xx-spi-driver.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -317,6 +317,12 @@ config SPI_PXA2XX - config SPI_PXA2XX_PCI - def_bool SPI_PXA2XX && X86_32 && PCI - -+config SPI_RB4XX -+ tristate "Mikrotik RB4XX SPI master" -+ depends on SPI_MASTER && AR71XX_MACH_RB4XX -+ help -+ SPI controller driver for the Mikrotik RB4xx series boards. -+ - config SPI_S3C24XX - tristate "Samsung S3C24XX series SPI" - depends on ARCH_S3C2410 && EXPERIMENTAL ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -56,6 +56,7 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci. - obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o - obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o - obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o -+obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o - - # special build for s3c24xx spi driver with fiq support - spi_s3c24xx_hw-y := spi_s3c24xx.o diff --git a/target/linux/ar71xx/patches-2.6.39/153-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-2.6.39/153-spi-rb4xx-cpld-driver.patch deleted file mode 100644 index 0521d4de51..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/153-spi-rb4xx-cpld-driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -479,6 +479,13 @@ config SPI_TLE62X0 - sysfs interface, with each line presented as a kind of GPIO - exposing both switch control and diagnostic feedback. - -+config SPI_RB4XX_CPLD -+ tristate "MikroTik RB4XX CPLD driver" -+ depends on AR71XX_MACH_RB4XX -+ help -+ SPI driver for the Xilinx CPLD chip present on the -+ MikroTik RB4xx boards. -+ - # - # Add new SPI protocol masters in alphabetical order above this line - # ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -65,6 +65,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ) - # ... add above this line ... - - # SPI protocol drivers (device/link on bus) -+obj-$(CONFIG_SPI_RB4XX_CPLD) += spi-rb4xx-cpld.o - obj-$(CONFIG_SPI_SPIDEV) += spidev.o - obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o - # ... add above this line ... diff --git a/target/linux/ar71xx/patches-2.6.39/200-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-2.6.39/200-rb4xx_nand_driver.patch deleted file mode 100644 index 53c4db2998..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/200-rb4xx_nand_driver.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -531,4 +531,8 @@ config MTD_NAND_FSMC - Enables support for NAND Flash chips on the ST Microelectronics - Flexible Static Memory Controller (FSMC) - -+config MTD_NAND_RB4XX -+ tristate "NAND flash driver for RouterBoard 4xx series" -+ depends on MTD_NAND && AR71XX_MACH_RB4XX -+ - endif # MTD_NAND ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27 - obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o - obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o - obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o -+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o - obj-$(CONFIG_MTD_ALAUDA) += alauda.o - obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o - obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o diff --git a/target/linux/ar71xx/patches-2.6.39/201-ap83_spi_controller.patch b/target/linux/ar71xx/patches-2.6.39/201-ap83_spi_controller.patch deleted file mode 100644 index 46c96fb2d0..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/201-ap83_spi_controller.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -10,6 +10,7 @@ obj-$(CONFIG_SPI_MASTER) += spi.o - - # SPI master controller drivers (bus) - obj-$(CONFIG_SPI_ALTERA) += spi_altera.o -+obj-$(CONFIG_SPI_AP83) += spi-ap83.o - obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o - obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o - obj-$(CONFIG_SPI_ATH79) += ath79_spi.o ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -67,6 +67,14 @@ config SPI_ATH79 - This enables support for the SPI controller present on the - Atheros AR71XX/AR724X/AR913X SoCs. - -+config SPI_AP83 -+ tristate "Atheros AP83 specific SPI Controller" -+ depends on SPI_MASTER && AR71XX_MACH_AP83 -+ select SPI_BITBANG -+ help -+ This is a specific SPI controller driver for the Atheros AP83 -+ reference board. -+ - config SPI_AR71XX - tristate "Atheros AR71xx SPI Controller" - depends on SPI_MASTER && ATHEROS_AR71XX diff --git a/target/linux/ar71xx/patches-2.6.39/202-spi_vsc7385_driver.patch b/target/linux/ar71xx/patches-2.6.39/202-spi_vsc7385_driver.patch deleted file mode 100644 index a98d940ef8..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/202-spi_vsc7385_driver.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -494,6 +494,11 @@ config SPI_RB4XX_CPLD - SPI driver for the Xilinx CPLD chip present on the - MikroTik RB4xx boards. - -+config SPI_VSC7385 -+ tristate "Vitesse VSC7385 ethernet switch driver" -+ help -+ SPI driver for the Vitesse VSC7385 ethernet switch. -+ - # - # Add new SPI protocol masters in alphabetical order above this line - # ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -68,6 +68,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ) - # SPI protocol drivers (device/link on bus) - obj-$(CONFIG_SPI_RB4XX_CPLD) += spi-rb4xx-cpld.o - obj-$(CONFIG_SPI_SPIDEV) += spidev.o -+obj-$(CONFIG_SPI_VSC7385) += spi-vsc7385.o - obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o - # ... add above this line ... - diff --git a/target/linux/ar71xx/patches-2.6.39/203-pb44_spi_controller.patch b/target/linux/ar71xx/patches-2.6.39/203-pb44_spi_controller.patch deleted file mode 100644 index fb62e1d73d..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/203-pb44_spi_controller.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -82,6 +82,14 @@ config SPI_AR71XX - help - This is the SPI contoller driver for Atheros AR71xx. - -+config SPI_PB44 -+ tristate "Atheros PB44 board specific SPI controller" -+ depends on SPI_MASTER && AR71XX_MACH_PB44 -+ select SPI_BITBANG -+ help -+ This is a specific SPI controller driver for the Atheros PB44 -+ reference board. -+ - config SPI_ATMEL - tristate "Atmel SPI Controller" - depends on (ARCH_AT91 || AVR32) ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -29,6 +29,7 @@ obj-$(CONFIG_SPI_GPIO) += spi_gpio.o - obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o - obj-$(CONFIG_SPI_IMX) += spi_imx.o - obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o -+obj-$(CONFIG_SPI_PB44) += pb44_spi.o - obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o - obj-$(CONFIG_SPI_PXA2XX_PCI) += pxa2xx_spi_pci.o - obj-$(CONFIG_SPI_OC_TINY) += spi_oc_tiny.o diff --git a/target/linux/ar71xx/patches-2.6.39/205-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-2.6.39/205-wndr3700-usb-led-driver.patch deleted file mode 100644 index 3c1fef9df1..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/205-wndr3700-usb-led-driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -379,6 +379,13 @@ config LEDS_TRIGGERS - These triggers allow kernel events to drive the LEDs and can - be configured via sysfs. If unsure, say Y. - -+config LEDS_WNDR3700_USB -+ tristate "NETGEAR WNDR3700 USB LED driver" -+ depends on LEDS_CLASS && AR71XX_MACH_WNDR3700 -+ help -+ This option enables support for the USB LED found on the -+ NETGEAR WNDR3700 board. -+ - comment "LED Triggers" - - config LEDS_TRIGGER_TIMER ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -33,6 +33,7 @@ obj-$(CONFIG_LEDS_DA903X) += leds-da903 - obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o - obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o - obj-$(CONFIG_LEDS_PWM) += leds-pwm.o -+obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o - obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o - obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o - obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o diff --git a/target/linux/ar71xx/patches-2.6.39/206-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-2.6.39/206-nxp-74hc153-gpio-chip-driver.patch deleted file mode 100644 index 8299a883fc..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/206-nxp-74hc153-gpio-chip-driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -419,4 +419,13 @@ config AB8500_GPIO - depends on AB8500_CORE && BROKEN - help - Select this to enable the AB8500 IC GPIO driver -+ -+comment "Other GPIO expanders" -+ -+config GPIO_NXP_74HC153 -+ tristate "NXP 74HC153 Dual 4-input multiplexer" -+ help -+ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This -+ provides a GPIO interface supporting input mode only. -+ - endif ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -18,6 +18,7 @@ obj-$(CONFIG_GPIO_MAX7301) += max7301.o - obj-$(CONFIG_GPIO_MAX732X) += max732x.o - obj-$(CONFIG_GPIO_MC33880) += mc33880.o - obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o -+obj-$(CONFIG_GPIO_NXP_74HC153) += gpio-nxp-74hc153.o - obj-$(CONFIG_GPIO_74X164) += 74x164.o - obj-$(CONFIG_GPIO_PCA953X) += pca953x.o - obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o diff --git a/target/linux/ar71xx/patches-2.6.39/207-rb750-led-driver.patch b/target/linux/ar71xx/patches-2.6.39/207-rb750-led-driver.patch deleted file mode 100644 index 419c81495b..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/207-rb750-led-driver.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -386,6 +386,10 @@ config LEDS_WNDR3700_USB - This option enables support for the USB LED found on the - NETGEAR WNDR3700 board. - -+config LEDS_RB750 -+ tristate "LED driver for the Mikrotik RouterBOARD 750" -+ depends on LEDS_CLASS && AR71XX_MACH_RB750 -+ - comment "LED Triggers" - - config LEDS_TRIGGER_TIMER ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -40,6 +40,7 @@ obj-$(CONFIG_LEDS_LT3593) += leds-lt359 - obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o - obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o - obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o -+obj-$(CONFIG_LEDS_RB750) += leds-rb750.o - obj-$(CONFIG_LEDS_NS2) += leds-ns2.o - obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o - diff --git a/target/linux/ar71xx/patches-2.6.39/208-rb750-nand-driver.patch b/target/linux/ar71xx/patches-2.6.39/208-rb750-nand-driver.patch deleted file mode 100644 index d48cdf565e..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/208-rb750-nand-driver.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -535,4 +535,8 @@ config MTD_NAND_RB4XX - tristate "NAND flash driver for RouterBoard 4xx series" - depends on MTD_NAND && AR71XX_MACH_RB4XX - -+config MTD_NAND_RB750 -+ tristate "NAND flash driver for the RouterBoard 750" -+ depends on MTD_NAND && AR71XX_MACH_RB750 -+ - endif # MTD_NAND ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -35,6 +35,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx - obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o - obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o - obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o -+obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o - obj-$(CONFIG_MTD_ALAUDA) += alauda.o - obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o - obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o diff --git a/target/linux/ar71xx/patches-2.6.39/300-mips_fw_myloader.patch b/target/linux/ar71xx/patches-2.6.39/300-mips_fw_myloader.patch deleted file mode 100644 index 7cf72f8efb..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/300-mips_fw_myloader.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -181,6 +181,7 @@ endif - # - libs-$(CONFIG_ARC) += arch/mips/fw/arc/ - libs-$(CONFIG_CFE) += arch/mips/fw/cfe/ -+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/ - libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/ - libs-y += arch/mips/fw/lib/ - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -933,6 +933,9 @@ config MIPS_NILE4 - config MIPS_DISABLE_OBSOLETE_IDE - bool - -+config MYLOADER -+ bool -+ - config SYNC_R4K - bool - diff --git a/target/linux/ar71xx/patches-2.6.39/400-mips-disable-ath79-platform.patch b/target/linux/ar71xx/patches-2.6.39/400-mips-disable-ath79-platform.patch deleted file mode 100644 index 4f68cc7f0e..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/400-mips-disable-ath79-platform.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -757,7 +757,7 @@ endchoice - - source "arch/mips/alchemy/Kconfig" - source "arch/mips/ar71xx/Kconfig" --source "arch/mips/ath79/Kconfig" -+# source "arch/mips/ath79/Kconfig" - source "arch/mips/bcm63xx/Kconfig" - source "arch/mips/jazz/Kconfig" - source "arch/mips/jz4740/Kconfig" diff --git a/target/linux/ar71xx/patches-2.6.39/500-ar933x-uart-driver.patch b/target/linux/ar71xx/patches-2.6.39/500-ar933x-uart-driver.patch deleted file mode 100644 index 530d0576f9..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/500-ar933x-uart-driver.patch +++ /dev/null @@ -1,50 +0,0 @@ ---- a/drivers/tty/serial/Kconfig -+++ b/drivers/tty/serial/Kconfig -@@ -1612,4 +1612,27 @@ config SERIAL_MXS_AUART_CONSOLE - help - Enable a MXS AUART port to be the system console. - -+config SERIAL_AR933X -+ bool "AR933X serial port support" -+ depends on SOC_AR933X -+ select SERIAL_CORE -+ help -+ If you have an Atheros AR933X SOC based board and want to use the -+ built-in UART of the SoC, say Y to this option. -+ -+config SERIAL_AR933X_CONSOLE -+ bool "Console on AR933X serial port" -+ depends on SERIAL_AR933X=y -+ select SERIAL_CORE_CONSOLE -+ help -+ Enable a built-in UART port of the AR933X to be the system console. -+ -+config SERIAL_AR933X_NR_UARTS -+ int "Maximum number of AR933X serial ports" -+ depends on SERIAL_AR933X -+ default "2" -+ help -+ Set this to the number of serial ports you want the driver -+ to support. -+ - endmenu ---- a/drivers/tty/serial/Makefile -+++ b/drivers/tty/serial/Makefile -@@ -94,3 +94,4 @@ obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x6 - obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o - obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o - obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o -+obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o ---- a/include/linux/serial_core.h -+++ b/include/linux/serial_core.h -@@ -202,6 +202,10 @@ - /* VIA VT8500 SoC */ - #define PORT_VT8500 97 - -+/* Atheros AR933X SoC */ -+#define PORT_AR933X 99 -+ -+ - #ifdef __KERNEL__ - - #include diff --git a/target/linux/ar71xx/patches-2.6.39/901-get_c0_compare_irq_function.patch b/target/linux/ar71xx/patches-2.6.39/901-get_c0_compare_irq_function.patch deleted file mode 100644 index 71b0b3f3e2..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/901-get_c0_compare_irq_function.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/arch/mips/kernel/traps.c -+++ b/arch/mips/kernel/traps.c -@@ -54,6 +54,7 @@ - #include - #include - #include -+#include - - extern void check_wait(void); - extern asmlinkage void r4k_wait(void); -@@ -1576,6 +1577,8 @@ void __cpuinit per_cpu_trap_init(void) - if (cpu_has_mips_r2) { - cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP; - cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7; -+ if (get_c0_compare_irq) -+ cp0_compare_irq = get_c0_compare_irq(); - cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7; - if (cp0_perfcount_irq == cp0_compare_irq) - cp0_perfcount_irq = -1; ---- a/arch/mips/include/asm/time.h -+++ b/arch/mips/include/asm/time.h -@@ -52,6 +52,7 @@ extern int (*perf_irq)(void); - */ - #ifdef CONFIG_CEVT_R4K_LIB - extern unsigned int __weak get_c0_compare_int(void); -+extern unsigned int __weak get_c0_compare_irq(void); - extern int r4k_clockevent_init(void); - #endif - diff --git a/target/linux/ar71xx/patches-2.6.39/902-fix-occasional-kernel-hangs-during-boot.patch b/target/linux/ar71xx/patches-2.6.39/902-fix-occasional-kernel-hangs-during-boot.patch deleted file mode 100644 index 8150ee4810..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/902-fix-occasional-kernel-hangs-during-boot.patch +++ /dev/null @@ -1,104 +0,0 @@ -From patchwork Tue Nov 8 14:59:01 2011 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: MIPS: Kernel hangs occasionally during boot. -Date: Tue, 08 Nov 2011 13:59:01 -0000 -From: Al Cooper -X-Patchwork-Id: 2911 -Message-Id: <1320764341-4275-1-git-send-email-alcooperx@gmail.com> -To: ralf@linux-mips.org, linux-mips@linux-mips.org, - linux-kernel@vger.kernel.org -Cc: "Al Cooper" - -The Kernel hangs occasionally during boot after -"Calibrating delay loop..". This is caused by the -c0_compare_int_usable() routine in cevt-r4k.c returning false which -causes the system to disable the timer and hang later. The false -return happens because the routine is using a series of four calls to -irq_disable_hazard() as a delay while it waits for the timer changes -to propagate to the cp0 cause register. On newer MIPS cores, like the 74K, -the series of irq_disable_hazard() calls turn into ehb instructions and -can take as little as a few clock ticks for all 4 instructions. This -is not enough of a delay, so the routine thinks the timer is not working. -This fix uses up to a max number of cycle counter ticks for the delay -and uses back_to_back_c0_hazard() instead of irq_disable_hazard() to -handle the hazard condition between cp0 writes and cp0 reads. - -Signed-off-by: Al Cooper - ---- -arch/mips/kernel/cevt-r4k.c | 38 +++++++++++++++++++------------------- - 1 files changed, 19 insertions(+), 19 deletions(-) - ---- a/arch/mips/kernel/cevt-r4k.c -+++ b/arch/mips/kernel/cevt-r4k.c -@@ -103,19 +103,10 @@ static int c0_compare_int_pending(void) - - /* - * Compare interrupt can be routed and latched outside the core, -- * so a single execution hazard barrier may not be enough to give -- * it time to clear as seen in the Cause register. 4 time the -- * pipeline depth seems reasonably conservative, and empirically -- * works better in configurations with high CPU/bus clock ratios. -+ * so wait up to worst case number of cycle counter ticks for timer interrupt -+ * changes to propagate to the cause register. - */ -- --#define compare_change_hazard() \ -- do { \ -- irq_disable_hazard(); \ -- irq_disable_hazard(); \ -- irq_disable_hazard(); \ -- irq_disable_hazard(); \ -- } while (0) -+#define COMPARE_INT_SEEN_TICKS 50 - - int c0_compare_int_usable(void) - { -@@ -126,8 +117,12 @@ int c0_compare_int_usable(void) - * IP7 already pending? Try to clear it by acking the timer. - */ - if (c0_compare_int_pending()) { -- write_c0_compare(read_c0_count()); -- compare_change_hazard(); -+ cnt = read_c0_count(); -+ write_c0_compare(cnt); -+ back_to_back_c0_hazard(); -+ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS)) -+ if (!c0_compare_int_pending()) -+ break; - if (c0_compare_int_pending()) - return 0; - } -@@ -136,7 +131,7 @@ int c0_compare_int_usable(void) - cnt = read_c0_count(); - cnt += delta; - write_c0_compare(cnt); -- compare_change_hazard(); -+ back_to_back_c0_hazard(); - if ((int)(read_c0_count() - cnt) < 0) - break; - /* increase delta if the timer was already expired */ -@@ -145,12 +140,17 @@ int c0_compare_int_usable(void) - while ((int)(read_c0_count() - cnt) <= 0) - ; /* Wait for expiry */ - -- compare_change_hazard(); -+ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS)) -+ if (c0_compare_int_pending()) -+ break; - if (!c0_compare_int_pending()) - return 0; -- -- write_c0_compare(read_c0_count()); -- compare_change_hazard(); -+ cnt = read_c0_count(); -+ write_c0_compare(cnt); -+ back_to_back_c0_hazard(); -+ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS)) -+ if (!c0_compare_int_pending()) -+ break; - if (c0_compare_int_pending()) - return 0; - diff --git a/target/linux/ar71xx/patches-2.6.39/910-unaligned_access_hacks.patch b/target/linux/ar71xx/patches-2.6.39/910-unaligned_access_hacks.patch deleted file mode 100644 index 921cf194d6..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/910-unaligned_access_hacks.patch +++ /dev/null @@ -1,117 +0,0 @@ ---- a/arch/mips/include/asm/checksum.h -+++ b/arch/mips/include/asm/checksum.h -@@ -12,6 +12,7 @@ - #define _ASM_CHECKSUM_H - - #include -+#include - - #include - -@@ -104,26 +105,30 @@ static inline __sum16 ip_fast_csum(const - const unsigned int *stop = word + ihl; - unsigned int csum; - int carry; -+ unsigned int w; - -- csum = word[0]; -- csum += word[1]; -- carry = (csum < word[1]); -+ csum = __get_unaligned_cpu32(word++); -+ -+ w = __get_unaligned_cpu32(word++); -+ csum += w; -+ carry = (csum < w); - csum += carry; - -- csum += word[2]; -- carry = (csum < word[2]); -+ w = __get_unaligned_cpu32(word++); -+ csum += w; -+ carry = (csum < w); - csum += carry; - -- csum += word[3]; -- carry = (csum < word[3]); -+ w = __get_unaligned_cpu32(word++); -+ csum += w; -+ carry = (csum < w); - csum += carry; - -- word += 4; - do { -- csum += *word; -- carry = (csum < *word); -+ w = __get_unaligned_cpu32(word++); -+ csum += w; -+ carry = (csum < w); - csum += carry; -- word++; - } while (word != stop); - - return csum_fold(csum); ---- a/include/linux/ip.h -+++ b/include/linux/ip.h -@@ -102,7 +102,7 @@ struct iphdr { - __be32 saddr; - __be32 daddr; - /*The options start here. */ --}; -+} __packed; - - #ifdef __KERNEL__ - #include ---- a/include/linux/ipv6.h -+++ b/include/linux/ipv6.h -@@ -126,7 +126,7 @@ struct ipv6hdr { - - struct in6_addr saddr; - struct in6_addr daddr; --}; -+} __packed; - - #ifdef __KERNEL__ - /* ---- a/include/linux/tcp.h -+++ b/include/linux/tcp.h -@@ -54,7 +54,7 @@ struct tcphdr { - __be16 window; - __sum16 check; - __be16 urg_ptr; --}; -+} __packed; - - /* - * The union cast uses a gcc extension to avoid aliasing problems ---- a/include/linux/udp.h -+++ b/include/linux/udp.h -@@ -24,7 +24,7 @@ struct udphdr { - __be16 dest; - __be16 len; - __sum16 check; --}; -+} __packed; - - /* UDP socket options */ - #define UDP_CORK 1 /* Never send partially complete segments */ ---- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c -+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c -@@ -14,6 +14,7 @@ - #include - #include - #include -+#include - #include - #include - -@@ -44,8 +45,8 @@ static bool ipv4_pkt_to_tuple(const stru - if (ap == NULL) - return false; - -- tuple->src.u3.ip = ap[0]; -- tuple->dst.u3.ip = ap[1]; -+ tuple->src.u3.ip = __get_unaligned_cpu32(ap++); -+ tuple->dst.u3.ip = __get_unaligned_cpu32(ap); - - return true; - } diff --git a/target/linux/ar71xx/patches-2.6.39/920-mdio_bitbang_ignore_ta_value.patch b/target/linux/ar71xx/patches-2.6.39/920-mdio_bitbang_ignore_ta_value.patch deleted file mode 100644 index 39584aabfa..0000000000 --- a/target/linux/ar71xx/patches-2.6.39/920-mdio_bitbang_ignore_ta_value.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/net/phy/mdio-bitbang.c -+++ b/drivers/net/phy/mdio-bitbang.c -@@ -165,16 +165,7 @@ static int mdiobb_read(struct mii_bus *b - - ctrl->ops->set_mdio_dir(ctrl, 0); - -- /* check the turnaround bit: the PHY should be driving it to zero */ -- if (mdiobb_get_bit(ctrl) != 0) { -- /* PHY didn't drive TA low -- flush any bits it -- * may be trying to send. -- */ -- for (i = 0; i < 32; i++) -- mdiobb_get_bit(ctrl); -- -- return 0xffff; -- } -+ mdiobb_get_bit(ctrl); - - ret = mdiobb_get_num(ctrl, 16); - mdiobb_get_bit(ctrl);