From: Roger Pueyo Centelles Date: Mon, 16 Nov 2020 15:54:54 +0000 (+0100) Subject: ath79: add support for MikroTik RouterBOARD wAPR-2nD (wAP R) X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=817bf0204569ca28121576c13f48186ed7b7c2ae;p=openwrt%2Fstaging%2Flynxis.git ath79: add support for MikroTik RouterBOARD wAPR-2nD (wAP R) This patch adds support for the MikroTik RouterBOARD wAPR-2nD (wAP R) router, a weatherproof 2.4 GHz access point with a miniPCI-e slot and a SIM card slot. Specifications: - SoC: Qualcomm Atheros QCA9533 - Flash: 16 MB (SPI) - RAM: 64 MB - Ethernet: 1x 10/100 Mbps (PoE in) - WiFi: AR9531 2T2R 2.4 GHz (SoC) - miniPCI-e slot - 4x green LEDs (1x WiFi, 3x RSSI) - 1x reset button See https://mikrotik.com/product/RBwAPR-2nD for more details. Flashing: TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Signed-off-by: Roger Pueyo Centelles --- diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-wapr-2nd.dts b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-wapr-2nd.dts new file mode 100644 index 0000000000..ba674c13d8 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-wapr-2nd.dts @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9533_mikrotik_routerboard-16m.dtsi" + +/ { + compatible = "mikrotik,routerboard-wapr-2nd", "qca,qca9533"; + model = "MikroTik RouterBOARD wAPR-2nD (wAP R)"; + + aliases { + led-boot = &led_rssilow; + led-failsafe = &led_rssilow; + led-upgrade = &led_rssilow; + led-running = &led_rssilow; + serial0 = &uart; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + + led_rssilow: rssilow { + label = "green:rssilow"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + + rssimedium { + label = "green:rssimedium"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + rssihigh { + label = "green:rssihigh"; + gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; + }; + + wlan { + label = "green:wlan"; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + }; + + gpio-export { + compatible = "gpio-export"; + + minipcie { + gpio-export,name = "minipcie"; + gpio-export,output = <1>; + gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&swphy0>; + + gmac-config { + device = <&gmac>; + switch-phy-swap = <1>; + }; +}; + +ð1 { + compatible = "syscon", "simple-mfd"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/target/linux/ath79/image/mikrotik.mk b/target/linux/ath79/image/mikrotik.mk index 3752c891a7..b7d745bc77 100644 --- a/target/linux/ath79/image/mikrotik.mk +++ b/target/linux/ath79/image/mikrotik.mk @@ -53,3 +53,12 @@ define Device/mikrotik_routerboard-wap-g-5hact2hnd SUPPORTED_DEVICES += rb-wapg-5hact2hnd endef TARGET_DEVICES += mikrotik_routerboard-wap-g-5hact2hnd + +define Device/mikrotik_routerboard-wapr-2nd + $(Device/mikrotik_nor) + SOC := qca9533 + DEVICE_MODEL := RouterBOARD wAPR-2nD (wAP R) + DEVICE_PACKAGES += rssileds + IMAGE_SIZE := 16256k +endef +TARGET_DEVICES += mikrotik_routerboard-wapr-2nd diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds index 60dcef4ff6..0d3209c2e3 100755 --- a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds @@ -10,6 +10,12 @@ case "$board" in mikrotik,routerboard-lhg-2nd) ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0" ;; +mikrotik,routerboard-wapr-2nd) + ucidef_set_rssimon "wlan0" "200000" "1" + ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100" + ucidef_set_led_rssi "rssimedium" "rssimedium" "green:rssimedium" "wlan0" "33" "100" + ucidef_set_led_rssi "rssihigh" "rssihigh" "green:rssihigh" "wlan0" "66" "100" + ;; mikrotik,routerboard-sxt-5nd-r2) ucidef_set_rssimon "wlan0" "200000" "1" ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100" diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network index 6bc4822551..584acc0feb 100755 --- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network +++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network @@ -19,7 +19,8 @@ ath79_setup_interfaces() mikrotik,routerboard-922uags-5hpacd|\ mikrotik,routerboard-lhg-2nd|\ mikrotik,routerboard-sxt-5nd-r2|\ - mikrotik,routerboard-wap-g-5hact2hnd) + mikrotik,routerboard-wap-g-5hact2hnd|\ + mikrotik,routerboard-wapr-2nd) ucidef_set_interface_lan "eth0" ;; *) @@ -40,7 +41,8 @@ ath79_setup_macs() mikrotik,routerboard-921gs-5hpacd-15s|\ mikrotik,routerboard-lhg-2nd|\ mikrotik,routerboard-sxt-5nd-r2|\ - mikrotik,routerboard-wap-g-5hact2hnd) + mikrotik,routerboard-wap-g-5hact2hnd|\ + mikrotik,routerboard-wapr-2nd) label_mac="$mac_base" lan_mac="$mac_base" ;; diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index f2cb1f774f..7ef6fdbe0f 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -24,7 +24,8 @@ case "$FIRMWARE" in "ath9k-eeprom-ahb-18100000.wmac.bin") case $board in mikrotik,routerboard-lhg-2nd|\ - mikrotik,routerboard-sxt-5nd-r2) + mikrotik,routerboard-sxt-5nd-r2|\ + mikrotik,routerboard-wapr-2nd) caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" +1) ;; mikrotik,routerboard-wap-g-5hact2hnd)