From: Robert Marko <robert.marko@sartura.hr>
Date: Mon, 18 May 2020 10:28:37 +0000 (+0200)
Subject: ipq806x: add GSBI1 node to DTSI
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=811af0d98adfc3e71cea134491a2255961cceac6;p=openwrt%2Fstaging%2Fzorun.git

ipq806x: add GSBI1 node to DTSI

IPQ806x series also has a GSBI1 with UART and I2C peripherals, so lets add the node for it.

Its needed for Edgecore ECW5410 which uses the UART from GSBI1 as second UART for Bluetooth.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---

diff --git a/target/linux/ipq806x/patches-5.4/851-add-gsbi1-dts.patch b/target/linux/ipq806x/patches-5.4/851-add-gsbi1-dts.patch
new file mode 100644
index 0000000000..2e1cb70e11
--- /dev/null
+++ b/target/linux/ipq806x/patches-5.4/851-add-gsbi1-dts.patch
@@ -0,0 +1,46 @@
+Index: linux-5.4.65/arch/arm/boot/dts/qcom-ipq8064.dtsi
+===================================================================
+--- linux-5.4.65.orig/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ linux-5.4.65/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -865,6 +865,41 @@
+ 			reg = <0x12100000 0x10000>;
+ 		};
+ 
++		gsbi1: gsbi@12440000 {
++			compatible = "qcom,gsbi-v1.0.0";
++			cell-index = <1>;
++			reg = <0x12440000 0x100>;
++			clocks = <&gcc GSBI1_H_CLK>;
++			clock-names = "iface";
++			#address-cells = <1>;
++			#size-cells = <1>;
++			ranges;
++			status = "disabled";
++
++			syscon-tcsr = <&tcsr>;
++
++			gsbi1_serial: serial@12450000 {
++				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
++				reg = <0x12450000 0x100>,
++				      <0x12400000 0x03>;
++				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
++				clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
++				clock-names = "core", "iface";
++				status = "disabled";
++			};
++
++			gsbi1_i2c: i2c@12460000 {
++				compatible = "qcom,i2c-qup-v1.1.1";
++				reg = <0x12460000 0x1000>;
++				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
++				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
++				clock-names = "core", "iface";
++				#address-cells = <1>;
++				#size-cells = <0>;
++				status = "disabled";
++			};
++		};
++
+ 		gsbi2: gsbi@12480000 {
+ 			compatible = "qcom,gsbi-v1.0.0";
+ 			cell-index = <2>;