From: Paul Mackerras Date: Tue, 9 Dec 2014 18:56:50 +0000 (+0530) Subject: powerpc/powernv: Switch off MMU before entering nap/sleep/rvwinkle mode X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8117ac6a6c2f;p=openwrt%2Fstaging%2Fblogic.git powerpc/powernv: Switch off MMU before entering nap/sleep/rvwinkle mode Currently, when going idle, we set the flag indicating that we are in nap mode (paca->kvm_hstate.hwthread_state) and then execute the nap (or sleep or rvwinkle) instruction, all with the MMU on. This is bad for two reasons: (a) the architecture specifies that those instructions must be executed with the MMU off, and in fact with only the SF, HV, ME and possibly RI bits set, and (b) this introduces a race, because as soon as we set the flag, another thread can switch the MMU to a guest context. If the race is lost, this thread will typically start looping on relocation-on ISIs at 0xc...4400. This fixes it by setting the MSR as required by the architecture before setting the flag or executing the nap/sleep/rvwinkle instruction. Cc: stable@vger.kernel.org [ shreyas@linux.vnet.ibm.com: Edited to handle LE ] Signed-off-by: Paul Mackerras Signed-off-by: Shreyas B. Prabhu Cc: Benjamin Herrenschmidt Cc: Michael Ellerman Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Michael Ellerman --- diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index c998279bd85b..a68ee15964b3 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -118,8 +118,10 @@ #define __MSR (MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV) #ifdef __BIG_ENDIAN__ #define MSR_ __MSR +#define MSR_IDLE (MSR_ME | MSR_SF | MSR_HV) #else #define MSR_ (__MSR | MSR_LE) +#define MSR_IDLE (MSR_ME | MSR_SF | MSR_HV | MSR_LE) #endif #define MSR_KERNEL (MSR_ | MSR_64BIT) #define MSR_USER32 (MSR_ | MSR_PR | MSR_EE) diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S index 18c0687e5ab3..e5aba6abbe6c 100644 --- a/arch/powerpc/kernel/idle_power7.S +++ b/arch/powerpc/kernel/idle_power7.S @@ -101,7 +101,23 @@ _GLOBAL(power7_powersave_common) std r9,_MSR(r1) std r1,PACAR1(r13) -_GLOBAL(power7_enter_nap_mode) + /* + * Go to real mode to do the nap, as required by the architecture. + * Also, we need to be in real mode before setting hwthread_state, + * because as soon as we do that, another thread can switch + * the MMU context to the guest. + */ + LOAD_REG_IMMEDIATE(r5, MSR_IDLE) + li r6, MSR_RI + andc r6, r9, r6 + LOAD_REG_ADDR(r7, power7_enter_nap_mode) + mtmsrd r6, 1 /* clear RI before setting SRR0/1 */ + mtspr SPRN_SRR0, r7 + mtspr SPRN_SRR1, r5 + rfid + + .globl power7_enter_nap_mode +power7_enter_nap_mode: #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE /* Tell KVM we're napping */ li r4,KVM_HWTHREAD_IN_NAP