From: David Bauer <mail@david-bauer.net>
Date: Thu, 2 Jan 2020 02:11:39 +0000 (+0100)
Subject: ramips: convert TP-Link MT7620 boards to tpt trigger
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=80e0b97d079289787793ecdee4cfcd2e3a674f70;p=openwrt%2Fstaging%2Fadrian.git

ramips: convert TP-Link MT7620 boards to tpt trigger

This converts all MediaTek MT7620 boards from TP-Link to use the now
supported WiFi throughput LED trigger. This way, the LED state now
covers all VAPs regardless of their name.

Also align all single-WiFi LEDs to represent the state of the 2.4GHz
radio. This was not always the case previously, as later-added support
for the MT7610 altered the phy probing order.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 1e7c6381f0058e49caab8de54eaad4862732f95d)
---

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 38125375f4..fa7daf0ff2 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -83,13 +83,10 @@ c108)
 c20i)
 	ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
 	ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
-	ucidef_set_led_wlan "wlan" "wlan" "$boardname:blue:wlan" "phy0radio"
 	;;
 c50)
 	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
 	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
-	ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" wlan1
-	set_wifi_led "$boardname:green:wlan5g"
 	;;
 cf-wr800n)
 	ucidef_set_led_netdev "lan" "lan" "$boardname:white:ethernet" eth0.1
@@ -324,12 +321,10 @@ tl-wr841n-v13)
 tplink,c2-v1)
 	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x1e"
 	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x01"
-	set_wifi_led "$boardname:green:wlan"
 	;;
 tplink,c20-v1)
 	ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
 	ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
-	ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0"
 	;;
 tplink,c20-v4)
 	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
diff --git a/target/linux/ramips/dts/ArcherC2-v1.dts b/target/linux/ramips/dts/ArcherC2-v1.dts
index 921a50a56c..5444a66461 100644
--- a/target/linux/ramips/dts/ArcherC2-v1.dts
+++ b/target/linux/ramips/dts/ArcherC2-v1.dts
@@ -57,6 +57,7 @@
 		wlan {
 			label = "c2-v1:green:wlan";
 			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
 		};
 	};
 
diff --git a/target/linux/ramips/dts/ArcherC20i.dts b/target/linux/ramips/dts/ArcherC20i.dts
index cf715a413f..52c2878763 100644
--- a/target/linux/ramips/dts/ArcherC20i.dts
+++ b/target/linux/ramips/dts/ArcherC20i.dts
@@ -36,6 +36,7 @@
 		wlan {
 			label = "c20i:blue:wlan";
 			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
 		};
 	};
 
diff --git a/target/linux/ramips/dts/ArcherC20v1.dts b/target/linux/ramips/dts/ArcherC20v1.dts
index 39e33b8ff0..7add569886 100644
--- a/target/linux/ramips/dts/ArcherC20v1.dts
+++ b/target/linux/ramips/dts/ArcherC20v1.dts
@@ -54,11 +54,13 @@
 		wlan5g {
 			label = "c20-v1:blue:wlan5g";
 			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
 		};
 
 		wlan2g {
 			label = "c20-v1:blue:wlan2g";
 			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
 		};
 
 		wps {
diff --git a/target/linux/ramips/dts/ArcherC50.dts b/target/linux/ramips/dts/ArcherC50.dts
index b6f5bed0b7..3c9f4d7729 100644
--- a/target/linux/ramips/dts/ArcherC50.dts
+++ b/target/linux/ramips/dts/ArcherC50.dts
@@ -54,11 +54,13 @@
 		wlan5g {
 			label = "c50:green:wlan5g";
 			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
 		};
 
 		wlan2g {
 			label = "c50:green:wlan2g";
 			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
 		};
 
 		wps {
diff --git a/target/linux/ramips/dts/ArcherMR200.dts b/target/linux/ramips/dts/ArcherMR200.dts
index ff00dbe958..0ff2f61d42 100644
--- a/target/linux/ramips/dts/ArcherMR200.dts
+++ b/target/linux/ramips/dts/ArcherMR200.dts
@@ -71,6 +71,7 @@
 		wlan {
 			label = "mr200:white:wlan";
 			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
 		};
 	};