From: Robert Marko Date: Tue, 30 Nov 2021 09:27:50 +0000 (+0100) Subject: ipq40xx: mikrotik: provide BDF-s on demand X-Git-Tag: v22.03.0-rc5~24 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=80602d472aae6c75ca7adf9688a32a4d68c55112;p=openwrt%2Fstaging%2Fhauke.git ipq40xx: mikrotik: provide BDF-s on demand Since we now can pass the API 1 BDF-s aka board.bin to the ath10k driver per radio lets use that to provide the BDF-s for MikroTik devices. This also resolves the performance issues that happen as MikroTik changes the boards and ships them under the same revision but they actually ship with and require a different BDF. Signed-off-by: Robert Marko (cherry picked from commit 4d4462cc2ace4b044e99e9b22a24cb4d89c7db95) Signed-off-by: Thibaut VARÈNE --- diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index c02b12dceb..e0b4eed6f2 100644 --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -215,6 +215,29 @@ case "$FIRMWARE" in ;; esac ;; +"ath10k/QCA4019/hw1.0/board-ahb-a000000.wifi.bin") + case "$board" in + mikrotik,cap-ac |\ + mikrotik,hap-ac2 |\ + mikrotik,hap-ac3) + wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data" + ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x2f20 0x2f20 ) || \ + ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x2f20 0x2f20 ) + ;; + esac + ;; +"ath10k/QCA4019/hw1.0/board-ahb-a800000.wifi.bin") + case "$board" in + mikrotik,cap-ac |\ + mikrotik,hap-ac2 |\ + mikrotik,hap-ac3 |\ + mikrotik,sxtsq-5-ac) + wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data" + ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0xaf20 0x2f20 ) || \ + ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x2f20 0x2f20 ) + ;; + esac + ;; *) exit 1 ;;