From: Aleksander Jan Bajkowski Date: Wed, 5 Oct 2022 21:05:26 +0000 (+0200) Subject: lantiq: add 6.1 tag to upstream patch X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=802ca492d85e6f6af05676518889d4de50697477;p=openwrt%2Fstaging%2Fnoltari.git lantiq: add 6.1 tag to upstream patch Add 6.1 tag to upstream patch now that 6.1 got tagged. This permits to track patch in a better way and directly drop them on kernel bump. Signed-off-by: Aleksander Jan Bajkowski --- diff --git a/target/linux/lantiq/patches-5.10/0320-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch b/target/linux/lantiq/patches-5.10/0320-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch deleted file mode 100644 index 0ac9adfb96..0000000000 --- a/target/linux/lantiq/patches-5.10/0320-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch +++ /dev/null @@ -1,86 +0,0 @@ -From 2025bc9c3a949b65bfd0601f727678b37962c6c5 Mon Sep 17 00:00:00 2001 -From: Aleksander Jan Bajkowski -Date: Fri, 4 Jun 2021 18:27:58 +0200 -Subject: [PATCH] MIPS: lantiq: enable all hardware interrupts on second VPE - -This patch is needed to handle interrupts by the second VPE on the Lantiq -ARX100, xRX200, xRX300 and xRX330 SoCs. Switching some ICU interrupts to -the second VPE results in a hang. Currently, the vsmp_init_secondary() -function is responsible for enabling these interrupts. It only enables -Malta-specific interrupts (SW0, SW1, HW4 and HW5). - -The MIPS core has 8 interrupts defined. On Lantiq SoCs, hardware -interrupts are wired to an ICU instance. Each VPE has an independent -instance of the ICU. The mapping of the ICU interrupts is shown below: -SW0(IP0) - IPI call, -SW1(IP1) - IPI resched, -HW0(IP2) - ICU 0-31, -HW1(IP3) - ICU 32-63, -HW2(IP4) - ICU 64-95, -HW3(IP5) - ICU 96-127, -HW4(IP6) - ICU 128-159, -HW5(IP7) - timer. - -This patch enables all interrupt lines on the second VPE. - -This problem affects multithreaded SoCs with a custom interrupt controller. -SOCs with 1004Kc core and newer use the MIPS GIC. At this point, I am aware -that the Realtek RTL839x and RTL930x SoCs may need a similar fix. In the -future, this may be replaced with some generic solution. - -Tested on Lantiq xRX200. - -Suggested-by: Thomas Bogendoerfer -Signed-off-by: Aleksander Jan Bajkowski ---- - arch/mips/lantiq/prom.c | 26 ++++++++++++++++++++++++-- - 1 file changed, 24 insertions(+), 2 deletions(-) - ---- a/arch/mips/lantiq/prom.c -+++ b/arch/mips/lantiq/prom.c -@@ -37,6 +37,14 @@ static struct ltq_soc_info soc_info; - /* for Multithreading (APRP), vpe.c will use it */ - unsigned long cp0_memsize; - -+/* -+ * These structs are used to override vsmp_init_secondary() -+ */ -+#if defined(CONFIG_MIPS_MT_SMP) -+extern const struct plat_smp_ops vsmp_smp_ops; -+static struct plat_smp_ops lantiq_smp_ops; -+#endif -+ - const char *get_system_type(void) - { - return soc_info.sys_type; -@@ -100,6 +108,17 @@ void __init device_tree_init(void) - unflatten_and_copy_device_tree(); - } - -+#if defined(CONFIG_MIPS_MT_SMP) -+static void lantiq_init_secondary(void) -+{ -+ /* -+ * MIPS CPU startup function vsmp_init_secondary() will only -+ * enable some of the interrupts for the second CPU/VPE. -+ */ -+ set_c0_status(ST0_IM); -+} -+#endif -+ - void __init prom_init(void) - { - /* call the soc specific detetcion code and get it to fill soc_info */ -@@ -111,7 +130,10 @@ void __init prom_init(void) - prom_init_cmdline(); - - #if defined(CONFIG_MIPS_MT_SMP) -- if (register_vsmp_smp_ops()) -- panic("failed to register_vsmp_smp_ops()"); -+ if (cpu_has_mipsmt) { -+ lantiq_smp_ops = vsmp_smp_ops; -+ lantiq_smp_ops.init_secondary = lantiq_init_secondary; -+ register_smp_ops(&lantiq_smp_ops); -+ } - #endif - } diff --git a/target/linux/lantiq/patches-5.10/0320-v6.1-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch b/target/linux/lantiq/patches-5.10/0320-v6.1-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch new file mode 100644 index 0000000000..b7b95d6bfc --- /dev/null +++ b/target/linux/lantiq/patches-5.10/0320-v6.1-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch @@ -0,0 +1,87 @@ +From 730320fd770d4114a2ecb6fb223dcc8c3cecdc5b Mon Sep 17 00:00:00 2001 +From: Aleksander Jan Bajkowski +Date: Wed, 21 Sep 2022 22:59:44 +0200 +Subject: [PATCH] MIPS: lantiq: enable all hardware interrupts on second VPE + +This patch is needed to handle interrupts by the second VPE on the Lantiq +ARX100, xRX200, xRX300 and xRX330 SoCs. Switching some ICU interrupts to +the second VPE results in a hang. Currently, the vsmp_init_secondary() +function is responsible for enabling these interrupts. It only enables +Malta-specific interrupts (SW0, SW1, HW4 and HW5). + +The MIPS core has 8 interrupts defined. On Lantiq SoCs, hardware +interrupts are wired to an ICU instance. Each VPE has an independent +instance of the ICU. The mapping of the ICU interrupts is shown below: +SW0(IP0) - IPI call, +SW1(IP1) - IPI resched, +HW0(IP2) - ICU 0-31, +HW1(IP3) - ICU 32-63, +HW2(IP4) - ICU 64-95, +HW3(IP5) - ICU 96-127, +HW4(IP6) - ICU 128-159, +HW5(IP7) - timer. + +This patch enables all interrupt lines on the second VPE. + +This problem affects multithreaded SoCs with a custom interrupt controller. +SOCs with 1004Kc core and newer use the MIPS GIC. At this point, I am aware +that the Realtek RTL839x and RTL930x SoCs may need a similar fix. In the +future, this may be replaced with some generic solution. + +Tested on Lantiq xRX200. + +Suggested-by: Thomas Bogendoerfer +Signed-off-by: Aleksander Jan Bajkowski +Signed-off-by: Thomas Bogendoerfer +--- + arch/mips/lantiq/prom.c | 26 ++++++++++++++++++++++++-- + 1 file changed, 24 insertions(+), 2 deletions(-) + +--- a/arch/mips/lantiq/prom.c ++++ b/arch/mips/lantiq/prom.c +@@ -37,6 +37,14 @@ static struct ltq_soc_info soc_info; + /* for Multithreading (APRP), vpe.c will use it */ + unsigned long cp0_memsize; + ++/* ++ * These structs are used to override vsmp_init_secondary() ++ */ ++#if defined(CONFIG_MIPS_MT_SMP) ++extern const struct plat_smp_ops vsmp_smp_ops; ++static struct plat_smp_ops lantiq_smp_ops; ++#endif ++ + const char *get_system_type(void) + { + return soc_info.sys_type; +@@ -100,6 +108,17 @@ void __init device_tree_init(void) + unflatten_and_copy_device_tree(); + } + ++#if defined(CONFIG_MIPS_MT_SMP) ++static void lantiq_init_secondary(void) ++{ ++ /* ++ * MIPS CPU startup function vsmp_init_secondary() will only ++ * enable some of the interrupts for the second CPU/VPE. ++ */ ++ set_c0_status(ST0_IM); ++} ++#endif ++ + void __init prom_init(void) + { + /* call the soc specific detetcion code and get it to fill soc_info */ +@@ -111,7 +130,10 @@ void __init prom_init(void) + prom_init_cmdline(); + + #if defined(CONFIG_MIPS_MT_SMP) +- if (register_vsmp_smp_ops()) +- panic("failed to register_vsmp_smp_ops()"); ++ if (cpu_has_mipsmt) { ++ lantiq_smp_ops = vsmp_smp_ops; ++ lantiq_smp_ops.init_secondary = lantiq_init_secondary; ++ register_smp_ops(&lantiq_smp_ops); ++ } + #endif + } diff --git a/target/linux/lantiq/patches-5.15/0320-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch b/target/linux/lantiq/patches-5.15/0320-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch deleted file mode 100644 index ad7f781e21..0000000000 --- a/target/linux/lantiq/patches-5.15/0320-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch +++ /dev/null @@ -1,86 +0,0 @@ -From 2025bc9c3a949b65bfd0601f727678b37962c6c5 Mon Sep 17 00:00:00 2001 -From: Aleksander Jan Bajkowski -Date: Fri, 4 Jun 2021 18:27:58 +0200 -Subject: [PATCH] MIPS: lantiq: enable all hardware interrupts on second VPE - -This patch is needed to handle interrupts by the second VPE on the Lantiq -ARX100, xRX200, xRX300 and xRX330 SoCs. Switching some ICU interrupts to -the second VPE results in a hang. Currently, the vsmp_init_secondary() -function is responsible for enabling these interrupts. It only enables -Malta-specific interrupts (SW0, SW1, HW4 and HW5). - -The MIPS core has 8 interrupts defined. On Lantiq SoCs, hardware -interrupts are wired to an ICU instance. Each VPE has an independent -instance of the ICU. The mapping of the ICU interrupts is shown below: -SW0(IP0) - IPI call, -SW1(IP1) - IPI resched, -HW0(IP2) - ICU 0-31, -HW1(IP3) - ICU 32-63, -HW2(IP4) - ICU 64-95, -HW3(IP5) - ICU 96-127, -HW4(IP6) - ICU 128-159, -HW5(IP7) - timer. - -This patch enables all interrupt lines on the second VPE. - -This problem affects multithreaded SoCs with a custom interrupt controller. -SOCs with 1004Kc core and newer use the MIPS GIC. At this point, I am aware -that the Realtek RTL839x and RTL930x SoCs may need a similar fix. In the -future, this may be replaced with some generic solution. - -Tested on Lantiq xRX200. - -Suggested-by: Thomas Bogendoerfer -Signed-off-by: Aleksander Jan Bajkowski ---- - arch/mips/lantiq/prom.c | 26 ++++++++++++++++++++++++-- - 1 file changed, 24 insertions(+), 2 deletions(-) - ---- a/arch/mips/lantiq/prom.c -+++ b/arch/mips/lantiq/prom.c -@@ -37,6 +37,14 @@ static struct ltq_soc_info soc_info; - /* for Multithreading (APRP), vpe.c will use it */ - unsigned long cp0_memsize; - -+/* -+ * These structs are used to override vsmp_init_secondary() -+ */ -+#if defined(CONFIG_MIPS_MT_SMP) -+extern const struct plat_smp_ops vsmp_smp_ops; -+static struct plat_smp_ops lantiq_smp_ops; -+#endif -+ - const char *get_system_type(void) - { - return soc_info.sys_type; -@@ -93,6 +101,17 @@ void __init device_tree_init(void) - unflatten_and_copy_device_tree(); - } - -+#if defined(CONFIG_MIPS_MT_SMP) -+static void lantiq_init_secondary(void) -+{ -+ /* -+ * MIPS CPU startup function vsmp_init_secondary() will only -+ * enable some of the interrupts for the second CPU/VPE. -+ */ -+ set_c0_status(ST0_IM); -+} -+#endif -+ - void __init prom_init(void) - { - /* call the soc specific detetcion code and get it to fill soc_info */ -@@ -104,7 +123,10 @@ void __init prom_init(void) - prom_init_cmdline(); - - #if defined(CONFIG_MIPS_MT_SMP) -- if (register_vsmp_smp_ops()) -- panic("failed to register_vsmp_smp_ops()"); -+ if (cpu_has_mipsmt) { -+ lantiq_smp_ops = vsmp_smp_ops; -+ lantiq_smp_ops.init_secondary = lantiq_init_secondary; -+ register_smp_ops(&lantiq_smp_ops); -+ } - #endif - } diff --git a/target/linux/lantiq/patches-5.15/0320-v6.1-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch b/target/linux/lantiq/patches-5.15/0320-v6.1-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch new file mode 100644 index 0000000000..d83a3616b3 --- /dev/null +++ b/target/linux/lantiq/patches-5.15/0320-v6.1-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch @@ -0,0 +1,87 @@ +From 730320fd770d4114a2ecb6fb223dcc8c3cecdc5b Mon Sep 17 00:00:00 2001 +From: Aleksander Jan Bajkowski +Date: Wed, 21 Sep 2022 22:59:44 +0200 +Subject: [PATCH] MIPS: lantiq: enable all hardware interrupts on second VPE + +This patch is needed to handle interrupts by the second VPE on the Lantiq +ARX100, xRX200, xRX300 and xRX330 SoCs. Switching some ICU interrupts to +the second VPE results in a hang. Currently, the vsmp_init_secondary() +function is responsible for enabling these interrupts. It only enables +Malta-specific interrupts (SW0, SW1, HW4 and HW5). + +The MIPS core has 8 interrupts defined. On Lantiq SoCs, hardware +interrupts are wired to an ICU instance. Each VPE has an independent +instance of the ICU. The mapping of the ICU interrupts is shown below: +SW0(IP0) - IPI call, +SW1(IP1) - IPI resched, +HW0(IP2) - ICU 0-31, +HW1(IP3) - ICU 32-63, +HW2(IP4) - ICU 64-95, +HW3(IP5) - ICU 96-127, +HW4(IP6) - ICU 128-159, +HW5(IP7) - timer. + +This patch enables all interrupt lines on the second VPE. + +This problem affects multithreaded SoCs with a custom interrupt controller. +SOCs with 1004Kc core and newer use the MIPS GIC. At this point, I am aware +that the Realtek RTL839x and RTL930x SoCs may need a similar fix. In the +future, this may be replaced with some generic solution. + +Tested on Lantiq xRX200. + +Suggested-by: Thomas Bogendoerfer +Signed-off-by: Aleksander Jan Bajkowski +Signed-off-by: Thomas Bogendoerfer +--- + arch/mips/lantiq/prom.c | 26 ++++++++++++++++++++++++-- + 1 file changed, 24 insertions(+), 2 deletions(-) + +--- a/arch/mips/lantiq/prom.c ++++ b/arch/mips/lantiq/prom.c +@@ -37,6 +37,14 @@ static struct ltq_soc_info soc_info; + /* for Multithreading (APRP), vpe.c will use it */ + unsigned long cp0_memsize; + ++/* ++ * These structs are used to override vsmp_init_secondary() ++ */ ++#if defined(CONFIG_MIPS_MT_SMP) ++extern const struct plat_smp_ops vsmp_smp_ops; ++static struct plat_smp_ops lantiq_smp_ops; ++#endif ++ + const char *get_system_type(void) + { + return soc_info.sys_type; +@@ -93,6 +101,17 @@ void __init device_tree_init(void) + unflatten_and_copy_device_tree(); + } + ++#if defined(CONFIG_MIPS_MT_SMP) ++static void lantiq_init_secondary(void) ++{ ++ /* ++ * MIPS CPU startup function vsmp_init_secondary() will only ++ * enable some of the interrupts for the second CPU/VPE. ++ */ ++ set_c0_status(ST0_IM); ++} ++#endif ++ + void __init prom_init(void) + { + /* call the soc specific detetcion code and get it to fill soc_info */ +@@ -104,7 +123,10 @@ void __init prom_init(void) + prom_init_cmdline(); + + #if defined(CONFIG_MIPS_MT_SMP) +- if (register_vsmp_smp_ops()) +- panic("failed to register_vsmp_smp_ops()"); ++ if (cpu_has_mipsmt) { ++ lantiq_smp_ops = vsmp_smp_ops; ++ lantiq_smp_ops.init_secondary = lantiq_init_secondary; ++ register_smp_ops(&lantiq_smp_ops); ++ } + #endif + }