From: Hauke Mehrtens Date: Mon, 20 Feb 2023 21:35:50 +0000 (+0100) Subject: toolchain/binutils: backport stable patches X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=801c88295e72db05a7e10c3bdffed6f3a0fba93e;p=openwrt%2Fstaging%2Fstintel.git toolchain/binutils: backport stable patches Add the patches with real changes from the binutils 2.40 stable branch. I am not aware that we ran into any of these problems, but I think it is better to take the existing stable patches. They were exported like this: git format-patch binutils-2_40...origin/binutils-2_40-branch I removed the patches changing the version numbers and updating the translations only. I removed the following patches: *Automatic-date-updat* 001-Re-enable-development.-Update-version-to-2.40.0.patch 004-Updated-translations-for-the-gas-and-binutils-sub-di.patch 015-Updated-Swedish-translation-for-the-binutils-sub-dir.patch 027-Updated-Swedish-translation-for-the-binutils-sub-dir.patch Signed-off-by: Hauke Mehrtens --- diff --git a/toolchain/binutils/patches/2.40/005-libctf-update-regexp-to-allow-makeinfo-to-build-docu.patch b/toolchain/binutils/patches/2.40/005-libctf-update-regexp-to-allow-makeinfo-to-build-docu.patch new file mode 100644 index 0000000000..19af34091c --- /dev/null +++ b/toolchain/binutils/patches/2.40/005-libctf-update-regexp-to-allow-makeinfo-to-build-docu.patch @@ -0,0 +1,70 @@ +From f7c5db99b76e8dde89335d794c82fcbfbf53c612 Mon Sep 17 00:00:00 2001 +From: Enze Li +Date: Sat, 14 Jan 2023 11:33:48 +0800 +Subject: [PATCH 05/50] libctf: update regexp to allow makeinfo to build + document + +While trying to build gdb on latest openSUSE Tumbleweed, I noticed the +following warning, + + checking for makeinfo... makeinfo --split-size=5000000 + configure: WARNING: + *** Makeinfo is too old. Info documentation will not be built. + +then I checked the version of makeinfo, it said, +====== +$ makeinfo --version +texi2any (GNU texinfo) 7.0.1 + +Copyright (C) 2022 Free Software Foundation, Inc. +License GPLv3+: GNU GPL version 3 or later +This is free software: you are free to change and redistribute it. +There is NO WARRANTY, to the extent permitted by law. +====== + +After digging a little bit, it became quite obvious that a dot is +missing in regexp that makes it impossible to match versions higher than +7.0, and here's the solution: + +- | egrep 'texinfo[^0-9]*(6\.[3-9]|[7-9][0-9])' >/dev/null 2>&1; then ++ | egrep 'texinfo[^0-9]*(6\.[3-9]|[7-9]\.[0-9])' >/dev/null 2>&1; then + +However, Eli pointed out that the solution above has another problem: it +will stop working when Texinfo 10.1 will be released. Meanwhile, he +suggested to solve this problem permanently. That is, we don't care +about the minor version for Texinfo > 6.9, we only care about the major +version. + +In this way, the problem will be resolved permanently, thanks to Eli. + +libctf/ChangeLog: + + * configure: Regenerated. + * configure.ac: Update regexp to match versions higher than 7.0. +--- + libctf/configure | 2 +- + libctf/configure.ac | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +--- a/libctf/configure ++++ b/libctf/configure +@@ -14865,7 +14865,7 @@ esac + # We require texinfo to be 6.3 or later, for a working synindex + # and validatemenus: otherwise we fall back to /bin/true. + if ${MAKEINFO} --version \ +- | egrep 'texinfo[^0-9]*(6\.[3-9]|[7-9][0-9])' >/dev/null 2>&1; then ++ | egrep 'texinfo[^0-9]*(6\.[3-9]|[7-9]|[1-6][0-9])' >/dev/null 2>&1; then + build_info=yes + else + build_info= +--- a/libctf/configure.ac ++++ b/libctf/configure.ac +@@ -184,7 +184,7 @@ changequote(,) + # We require texinfo to be 6.3 or later, for a working synindex + # and validatemenus: otherwise we fall back to /bin/true. + if ${MAKEINFO} --version \ +- | egrep 'texinfo[^0-9]*(6\.[3-9]|[7-9][0-9])' >/dev/null 2>&1; then ++ | egrep 'texinfo[^0-9]*(6\.[3-9]|[7-9]|[1-6][0-9])' >/dev/null 2>&1; then + build_info=yes + else + build_info= diff --git a/toolchain/binutils/patches/2.40/007-Fix-version-number-snafu-in-some-configuration-files.patch b/toolchain/binutils/patches/2.40/007-Fix-version-number-snafu-in-some-configuration-files.patch new file mode 100644 index 0000000000..0676240442 --- /dev/null +++ b/toolchain/binutils/patches/2.40/007-Fix-version-number-snafu-in-some-configuration-files.patch @@ -0,0 +1,444 @@ +From 59706683feafb6252d0ad369cf8759f75fd147be Mon Sep 17 00:00:00 2001 +From: Nick Clifton +Date: Tue, 17 Jan 2023 12:02:56 +0000 +Subject: [PATCH 07/50] Fix version number snafu in some configuration files: + 2.40.00 should be 2.40 + +--- + binutils/configure | 20 ++++++++++---------- + gprof/configure | 20 ++++++++++---------- + gprofng/configure | 20 ++++++++++---------- + gprofng/doc/version.texi | 4 ++-- + gprofng/libcollector/configure | 20 ++++++++++---------- + ld/configure | 20 ++++++++++---------- + 6 files changed, 52 insertions(+), 52 deletions(-) + +--- a/binutils/configure ++++ b/binutils/configure +@@ -1,6 +1,6 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.69 for binutils 2.40.00. ++# Generated by GNU Autoconf 2.69 for binutils 2.40. + # + # + # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +@@ -587,8 +587,8 @@ MAKEFLAGS= + # Identity of this package. + PACKAGE_NAME='binutils' + PACKAGE_TARNAME='binutils' +-PACKAGE_VERSION='2.40.00' +-PACKAGE_STRING='binutils 2.40.00' ++PACKAGE_VERSION='2.40' ++PACKAGE_STRING='binutils 2.40' + PACKAGE_BUGREPORT='' + PACKAGE_URL='' + +@@ -1401,7 +1401,7 @@ if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +-\`configure' configures binutils 2.40.00 to adapt to many kinds of systems. ++\`configure' configures binutils 2.40 to adapt to many kinds of systems. + + Usage: $0 [OPTION]... [VAR=VALUE]... + +@@ -1472,7 +1472,7 @@ fi + + if test -n "$ac_init_help"; then + case $ac_init_help in +- short | recursive ) echo "Configuration of binutils 2.40.00:";; ++ short | recursive ) echo "Configuration of binutils 2.40:";; + esac + cat <<\_ACEOF + +@@ -1631,7 +1631,7 @@ fi + test -n "$ac_init_help" && exit $ac_status + if $ac_init_version; then + cat <<\_ACEOF +-binutils configure 2.40.00 ++binutils configure 2.40 + generated by GNU Autoconf 2.69 + + Copyright (C) 2012 Free Software Foundation, Inc. +@@ -2099,7 +2099,7 @@ cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + +-It was created by binutils $as_me 2.40.00, which was ++It was created by binutils $as_me 2.40, which was + generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ +@@ -3081,7 +3081,7 @@ fi + + # Define the identity of the package. + PACKAGE='binutils' +- VERSION='2.40.00' ++ VERSION='2.40' + + + cat >>confdefs.h <<_ACEOF +@@ -15326,7 +15326,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri + # report actual input values of CONFIG_FILES etc. instead of their + # values after options handling. + ac_log=" +-This file was extended by binutils $as_me 2.40.00, which was ++This file was extended by binutils $as_me 2.40, which was + generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES +@@ -15392,7 +15392,7 @@ _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" + ac_cs_version="\\ +-binutils config.status 2.40.00 ++binutils config.status 2.40 + configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +--- a/gprof/configure ++++ b/gprof/configure +@@ -1,6 +1,6 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.69 for gprof 2.40.00. ++# Generated by GNU Autoconf 2.69 for gprof 2.40. + # + # + # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +@@ -587,8 +587,8 @@ MAKEFLAGS= + # Identity of this package. + PACKAGE_NAME='gprof' + PACKAGE_TARNAME='gprof' +-PACKAGE_VERSION='2.40.00' +-PACKAGE_STRING='gprof 2.40.00' ++PACKAGE_VERSION='2.40' ++PACKAGE_STRING='gprof 2.40' + PACKAGE_BUGREPORT='' + PACKAGE_URL='' + +@@ -1338,7 +1338,7 @@ if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +-\`configure' configures gprof 2.40.00 to adapt to many kinds of systems. ++\`configure' configures gprof 2.40 to adapt to many kinds of systems. + + Usage: $0 [OPTION]... [VAR=VALUE]... + +@@ -1409,7 +1409,7 @@ fi + + if test -n "$ac_init_help"; then + case $ac_init_help in +- short | recursive ) echo "Configuration of gprof 2.40.00:";; ++ short | recursive ) echo "Configuration of gprof 2.40:";; + esac + cat <<\_ACEOF + +@@ -1520,7 +1520,7 @@ fi + test -n "$ac_init_help" && exit $ac_status + if $ac_init_version; then + cat <<\_ACEOF +-gprof configure 2.40.00 ++gprof configure 2.40 + generated by GNU Autoconf 2.69 + + Copyright (C) 2012 Free Software Foundation, Inc. +@@ -1885,7 +1885,7 @@ cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + +-It was created by gprof $as_me 2.40.00, which was ++It was created by gprof $as_me 2.40, which was + generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ +@@ -2864,7 +2864,7 @@ fi + + # Define the identity of the package. + PACKAGE='gprof' +- VERSION='2.40.00' ++ VERSION='2.40' + + + cat >>confdefs.h <<_ACEOF +@@ -12572,7 +12572,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri + # report actual input values of CONFIG_FILES etc. instead of their + # values after options handling. + ac_log=" +-This file was extended by gprof $as_me 2.40.00, which was ++This file was extended by gprof $as_me 2.40, which was + generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES +@@ -12638,7 +12638,7 @@ _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" + ac_cs_version="\\ +-gprof config.status 2.40.00 ++gprof config.status 2.40 + configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +--- a/gprofng/configure ++++ b/gprofng/configure +@@ -1,6 +1,6 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.69 for gprofng 2.40.00. ++# Generated by GNU Autoconf 2.69 for gprofng 2.40. + # + # + # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +@@ -587,8 +587,8 @@ MAKEFLAGS= + # Identity of this package. + PACKAGE_NAME='gprofng' + PACKAGE_TARNAME='gprofng' +-PACKAGE_VERSION='2.40.00' +-PACKAGE_STRING='gprofng 2.40.00' ++PACKAGE_VERSION='2.40' ++PACKAGE_STRING='gprofng 2.40' + PACKAGE_BUGREPORT='' + PACKAGE_URL='' + +@@ -1362,7 +1362,7 @@ if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +-\`configure' configures gprofng 2.40.00 to adapt to many kinds of systems. ++\`configure' configures gprofng 2.40 to adapt to many kinds of systems. + + Usage: $0 [OPTION]... [VAR=VALUE]... + +@@ -1433,7 +1433,7 @@ fi + + if test -n "$ac_init_help"; then + case $ac_init_help in +- short | recursive ) echo "Configuration of gprofng 2.40.00:";; ++ short | recursive ) echo "Configuration of gprofng 2.40:";; + esac + cat <<\_ACEOF + +@@ -1547,7 +1547,7 @@ fi + test -n "$ac_init_help" && exit $ac_status + if $ac_init_version; then + cat <<\_ACEOF +-gprofng configure 2.40.00 ++gprofng configure 2.40 + generated by GNU Autoconf 2.69 + + Copyright (C) 2012 Free Software Foundation, Inc. +@@ -2079,7 +2079,7 @@ cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + +-It was created by gprofng $as_me 2.40.00, which was ++It was created by gprofng $as_me 2.40, which was + generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ +@@ -3052,7 +3052,7 @@ fi + + # Define the identity of the package. + PACKAGE='gprofng' +- VERSION='2.40.00' ++ VERSION='2.40' + + + cat >>confdefs.h <<_ACEOF +@@ -17467,7 +17467,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri + # report actual input values of CONFIG_FILES etc. instead of their + # values after options handling. + ac_log=" +-This file was extended by gprofng $as_me 2.40.00, which was ++This file was extended by gprofng $as_me 2.40, which was + generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES +@@ -17533,7 +17533,7 @@ _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" + ac_cs_version="\\ +-gprofng config.status 2.40.00 ++gprofng config.status 2.40 + configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +--- a/gprofng/doc/version.texi ++++ b/gprofng/doc/version.texi +@@ -1,4 +1,4 @@ + @set UPDATED 5 January 2023 + @set UPDATED-MONTH January 2023 +-@set EDITION 2.40.00 +-@set VERSION 2.40.00 ++@set EDITION 2.40 ++@set VERSION 2.40 +--- a/gprofng/libcollector/configure ++++ b/gprofng/libcollector/configure +@@ -1,6 +1,6 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.69 for gprofng 2.40.00. ++# Generated by GNU Autoconf 2.69 for gprofng 2.40. + # + # + # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +@@ -587,8 +587,8 @@ MAKEFLAGS= + # Identity of this package. + PACKAGE_NAME='gprofng' + PACKAGE_TARNAME='gprofng' +-PACKAGE_VERSION='2.40.00' +-PACKAGE_STRING='gprofng 2.40.00' ++PACKAGE_VERSION='2.40' ++PACKAGE_STRING='gprofng 2.40' + PACKAGE_BUGREPORT='' + PACKAGE_URL='' + +@@ -1325,7 +1325,7 @@ if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +-\`configure' configures gprofng 2.40.00 to adapt to many kinds of systems. ++\`configure' configures gprofng 2.40 to adapt to many kinds of systems. + + Usage: $0 [OPTION]... [VAR=VALUE]... + +@@ -1396,7 +1396,7 @@ fi + + if test -n "$ac_init_help"; then + case $ac_init_help in +- short | recursive ) echo "Configuration of gprofng 2.40.00:";; ++ short | recursive ) echo "Configuration of gprofng 2.40:";; + esac + cat <<\_ACEOF + +@@ -1505,7 +1505,7 @@ fi + test -n "$ac_init_help" && exit $ac_status + if $ac_init_version; then + cat <<\_ACEOF +-gprofng configure 2.40.00 ++gprofng configure 2.40 + generated by GNU Autoconf 2.69 + + Copyright (C) 2012 Free Software Foundation, Inc. +@@ -1991,7 +1991,7 @@ cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + +-It was created by gprofng $as_me 2.40.00, which was ++It was created by gprofng $as_me 2.40, which was + generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ +@@ -2968,7 +2968,7 @@ fi + + # Define the identity of the package. + PACKAGE='gprofng' +- VERSION='2.40.00' ++ VERSION='2.40' + + + cat >>confdefs.h <<_ACEOF +@@ -16098,7 +16098,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri + # report actual input values of CONFIG_FILES etc. instead of their + # values after options handling. + ac_log=" +-This file was extended by gprofng $as_me 2.40.00, which was ++This file was extended by gprofng $as_me 2.40, which was + generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES +@@ -16164,7 +16164,7 @@ _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" + ac_cs_version="\\ +-gprofng config.status 2.40.00 ++gprofng config.status 2.40 + configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +--- a/ld/configure ++++ b/ld/configure +@@ -1,6 +1,6 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.69 for ld 2.40.00. ++# Generated by GNU Autoconf 2.69 for ld 2.40. + # + # + # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +@@ -587,8 +587,8 @@ MAKEFLAGS= + # Identity of this package. + PACKAGE_NAME='ld' + PACKAGE_TARNAME='ld' +-PACKAGE_VERSION='2.40.00' +-PACKAGE_STRING='ld 2.40.00' ++PACKAGE_VERSION='2.40' ++PACKAGE_STRING='ld 2.40' + PACKAGE_BUGREPORT='' + PACKAGE_URL='' + +@@ -1423,7 +1423,7 @@ if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +-\`configure' configures ld 2.40.00 to adapt to many kinds of systems. ++\`configure' configures ld 2.40 to adapt to many kinds of systems. + + Usage: $0 [OPTION]... [VAR=VALUE]... + +@@ -1494,7 +1494,7 @@ fi + + if test -n "$ac_init_help"; then + case $ac_init_help in +- short | recursive ) echo "Configuration of ld 2.40.00:";; ++ short | recursive ) echo "Configuration of ld 2.40:";; + esac + cat <<\_ACEOF + +@@ -1661,7 +1661,7 @@ fi + test -n "$ac_init_help" && exit $ac_status + if $ac_init_version; then + cat <<\_ACEOF +-ld configure 2.40.00 ++ld configure 2.40 + generated by GNU Autoconf 2.69 + + Copyright (C) 2012 Free Software Foundation, Inc. +@@ -2376,7 +2376,7 @@ cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + +-It was created by ld $as_me 2.40.00, which was ++It was created by ld $as_me 2.40, which was + generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ +@@ -3359,7 +3359,7 @@ fi + + # Define the identity of the package. + PACKAGE='ld' +- VERSION='2.40.00' ++ VERSION='2.40' + + + cat >>confdefs.h <<_ACEOF +@@ -18083,7 +18083,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri + # report actual input values of CONFIG_FILES etc. instead of their + # values after options handling. + ac_log=" +-This file was extended by ld $as_me 2.40.00, which was ++This file was extended by ld $as_me 2.40, which was + generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES +@@ -18149,7 +18149,7 @@ _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" + ac_cs_version="\\ +-ld config.status 2.40.00 ++ld config.status 2.40 + configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + diff --git a/toolchain/binutils/patches/2.40/010-toplevel-Makefile.def-add-install-strip-dependency-o.patch b/toolchain/binutils/patches/2.40/010-toplevel-Makefile.def-add-install-strip-dependency-o.patch new file mode 100644 index 0000000000..bef40f546f --- /dev/null +++ b/toolchain/binutils/patches/2.40/010-toplevel-Makefile.def-add-install-strip-dependency-o.patch @@ -0,0 +1,60 @@ +From bcea253f5fa194e57f9564e8461c718e228bd26e Mon Sep 17 00:00:00 2001 +From: Indu Bhagat +Date: Wed, 18 Jan 2023 23:17:49 -0800 +Subject: [PATCH 10/50] toplevel: Makefile.def: add install-strip dependency on + libsframe + +As noted in PR libsframe/30014 - FTBFS: install-strip fails because +bfdlib relinks and fails to find libsframe, the install time +dependencies of libbfd need to be updated. + + PR libsframe/30014 + * Makefile.def: Reflect that libsframe needs to installed before + libbfd. Reorder a bit to better track libsframe dependencies. + * Makefile.in: Regenerate. + +(cherry picked from commit b8d21eb0cd10d6127e77cc437d82e949adb0c454) +--- + Makefile.def | 5 ++++- + Makefile.in | 3 ++- + 2 files changed, 6 insertions(+), 2 deletions(-) + +--- a/Makefile.def ++++ b/Makefile.def +@@ -493,7 +493,6 @@ dependencies = { module=install-binutils + dependencies = { module=install-strip-binutils; on=install-strip-opcodes; }; + + // Likewise for ld, libctf, and bfd. +-dependencies = { module=install-bfd; on=install-libsframe; }; + dependencies = { module=install-libctf; on=install-bfd; }; + dependencies = { module=install-ld; on=install-bfd; }; + dependencies = { module=install-ld; on=install-libctf; }; +@@ -501,6 +500,10 @@ dependencies = { module=install-strip-li + dependencies = { module=install-strip-ld; on=install-strip-bfd; }; + dependencies = { module=install-strip-ld; on=install-strip-libctf; }; + ++// libbfd depends on libsframe ++dependencies = { module=install-bfd; on=install-libsframe; }; ++dependencies = { module=install-strip-bfd; on=install-strip-libsframe; }; ++ + // libopcodes depends on libbfd + dependencies = { module=configure-opcodes; on=configure-bfd; hard=true; }; + dependencies = { module=install-opcodes; on=install-bfd; }; +--- a/Makefile.in ++++ b/Makefile.in +@@ -64549,13 +64549,14 @@ all-stageautoprofile-binutils: maybe-all + all-stageautofeedback-binutils: maybe-all-stageautofeedback-libsframe + install-binutils: maybe-install-opcodes + install-strip-binutils: maybe-install-strip-opcodes +-install-bfd: maybe-install-libsframe + install-libctf: maybe-install-bfd + install-ld: maybe-install-bfd + install-ld: maybe-install-libctf + install-strip-libctf: maybe-install-strip-bfd + install-strip-ld: maybe-install-strip-bfd + install-strip-ld: maybe-install-strip-libctf ++install-bfd: maybe-install-libsframe ++install-strip-bfd: maybe-install-strip-libsframe + configure-opcodes: configure-bfd + configure-stage1-opcodes: configure-stage1-bfd + configure-stage2-opcodes: configure-stage2-bfd diff --git a/toolchain/binutils/patches/2.40/018-gprofng-PR29521-docs-man-pages-are-not-in-the-releas.patch b/toolchain/binutils/patches/2.40/018-gprofng-PR29521-docs-man-pages-are-not-in-the-releas.patch new file mode 100644 index 0000000000..ae557645c0 --- /dev/null +++ b/toolchain/binutils/patches/2.40/018-gprofng-PR29521-docs-man-pages-are-not-in-the-releas.patch @@ -0,0 +1,703 @@ +From c6e269febbc946a54ed9dbbb2dc70feba6017607 Mon Sep 17 00:00:00 2001 +From: Vladimir Mezentsev +Date: Fri, 20 Jan 2023 15:39:55 -0800 +Subject: [PATCH 18/50] gprofng: PR29521 [docs] man pages are not in the + release tarball + +gprofng/ChangeLog +2023-01-20 Vladimir Mezentsev + + PR gprofng/29521 + * configure.ac: Check if $MAKEINFO and $HELP2MAN are missing. + * Makefile.am: Build doc if $MAKEINFO exists. + * doc/gprofng.texi: Update documentation for gprofng. + * doc/Makefile.am: Build gprofng.1. + * src/Makefile.am: Move the build of gprofng.1 to doc/Makefile.am. + * configure: Rebuild. + * Makefile.in: Rebuild. + * doc/Makefile.in: Rebuild. + * src/Makefile.in: Rebuild. +--- + gprofng/Makefile.am | 2 +- + gprofng/Makefile.in | 2 +- + gprofng/configure | 79 +++++++++++++++--- + gprofng/configure.ac | 21 +++-- + gprofng/doc/Makefile.am | 24 +++++- + gprofng/doc/Makefile.in | 93 ++++++++++++++++++--- + gprofng/doc/gprofng.texi | 169 +++++++++++++++++++++++++++++++++++++++ + gprofng/src/Makefile.am | 8 +- + gprofng/src/Makefile.in | 8 +- + 9 files changed, 364 insertions(+), 42 deletions(-) + +--- a/gprofng/Makefile.am ++++ b/gprofng/Makefile.am +@@ -23,7 +23,7 @@ AUTOMAKE_OPTIONS = dejagnu foreign + if BUILD_COLLECTOR + COLLECTOR_SUBDIRS = libcollector + endif +-if BUILD_MAN ++if BUILD_DOC + DOC_SUBDIR = doc + endif + if BUILD_SRC +--- a/gprofng/Makefile.in ++++ b/gprofng/Makefile.in +@@ -381,7 +381,7 @@ zlibinc = @zlibinc@ + ACLOCAL_AMFLAGS = -I . -I .. + AUTOMAKE_OPTIONS = dejagnu foreign + @BUILD_COLLECTOR_TRUE@COLLECTOR_SUBDIRS = libcollector +-@BUILD_MAN_TRUE@DOC_SUBDIR = doc ++@BUILD_DOC_TRUE@DOC_SUBDIR = doc + @BUILD_SRC_TRUE@SRC_SUBDIRS = src gp-display-html $(DOC_SUBDIR) + SUBDIRS = $(COLLECTOR_SUBDIRS) $(SRC_SUBDIRS) + DIST_SUBDIRS = libcollector src gp-display-html $(DOC_SUBDIR) +--- a/gprofng/configure ++++ b/gprofng/configure +@@ -639,6 +639,8 @@ GPROFNG_CPPFLAGS + GPROFNG_NO_FORMAT_TRUNCATION_CFLAGS + GPROFNG_CFLAGS + LD_NO_AS_NEEDED ++BUILD_DOC_FALSE ++BUILD_DOC_TRUE + BUILD_MAN_FALSE + BUILD_MAN_TRUE + HELP2MAN +@@ -12221,7 +12223,7 @@ else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +-#line 12224 "configure" ++#line 12226 "configure" + #include "confdefs.h" + + #if HAVE_DLFCN_H +@@ -12327,7 +12329,7 @@ else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +-#line 12330 "configure" ++#line 12332 "configure" + #include "confdefs.h" + + #if HAVE_DLFCN_H +@@ -16737,9 +16739,58 @@ fi + + # Generate manpages, if possible. + build_man=false ++build_doc=false + if test $cross_compiling = no; then ++ for ac_prog in help2man ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_HELP2MAN+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$HELP2MAN"; then ++ ac_cv_prog_HELP2MAN="$HELP2MAN" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_HELP2MAN="$ac_prog" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++HELP2MAN=$ac_cv_prog_HELP2MAN ++if test -n "$HELP2MAN"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HELP2MAN" >&5 ++$as_echo "$HELP2MAN" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi + +-HELP2MAN=${HELP2MAN-"${am_missing_run}help2man"} ++ ++ test -n "$HELP2MAN" && break ++done ++test -n "$HELP2MAN" || HELP2MAN="$MISSING help2man" ++ ++ case "x$HELP2MAN" in ++ x | */missing\ help2man* ) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: gprofng: help2man is missing. Man pages will not be built." >&5 ++$as_echo "$as_me: WARNING: gprofng: help2man is missing. Man pages will not be built." >&2;} ++ ;; ++ * ) build_man=true ;; ++ esac + + for ac_prog in makeinfo + do +@@ -16782,10 +16833,10 @@ fi + + test -n "$MAKEINFO" && break + done +-test -n "$MAKEINFO" || MAKEINFO=""@echo makeinfo missing; true"" ++test -n "$MAKEINFO" || MAKEINFO="$MISSING makeinfo" + +- case "$MAKEINFO" in +- *true) ++ case "x$MAKEINFO" in ++ x | */missing\ makeinfo*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: gprofng: makeinfo is missing. Info documentation will not be built." >&5 + $as_echo "$as_me: WARNING: gprofng: makeinfo is missing. Info documentation will not be built." >&2;} + ;; +@@ -16796,9 +16847,7 @@ $as_echo "$as_me: WARNING: gprofng: make + $as_echo "$as_me: WARNING: gprofng: $MAKEINFO is too old. Info documentation will not be built." >&2;} + MAKEINFO="@echo $MAKEINFO is too old, 6.5 or newer required; true" + ;; +- x* ) +- build_man=true +- ;; ++ x* ) build_doc=true ;; + esac + ;; + esac +@@ -16812,6 +16861,14 @@ else + BUILD_MAN_FALSE= + fi + ++ if test x$build_doc = xtrue; then ++ BUILD_DOC_TRUE= ++ BUILD_DOC_FALSE='#' ++else ++ BUILD_DOC_TRUE='#' ++ BUILD_DOC_FALSE= ++fi ++ + + LD_NO_AS_NEEDED=${no_as_needed} + +@@ -17070,6 +17127,10 @@ if test -z "${BUILD_MAN_TRUE}" && test - + as_fn_error $? "conditional \"BUILD_MAN\" was never defined. + Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi ++if test -z "${BUILD_DOC_TRUE}" && test -z "${BUILD_DOC_FALSE}"; then ++ as_fn_error $? "conditional \"BUILD_DOC\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 ++fi + + : "${CONFIG_STATUS=./config.status}" + ac_write_fail=0 +--- a/gprofng/configure.ac ++++ b/gprofng/configure.ac +@@ -210,11 +210,19 @@ AM_ZLIB + + # Generate manpages, if possible. + build_man=false ++build_doc=false + if test $cross_compiling = no; then +- AM_MISSING_PROG(HELP2MAN, help2man) +- AC_CHECK_PROGS([MAKEINFO], makeinfo, ["@echo makeinfo missing; true"]) +- case "$MAKEINFO" in +- *true) ++ AC_CHECK_PROGS([HELP2MAN], help2man, [$MISSING help2man]) ++ case "x$HELP2MAN" in ++ x | */missing\ help2man* ) ++ AC_MSG_WARN([gprofng: help2man is missing. Man pages will not be built.]) ++ ;; ++ * ) build_man=true ;; ++ esac ++ ++ AC_CHECK_PROGS([MAKEINFO], makeinfo, [$MISSING makeinfo]) ++ case "x$MAKEINFO" in ++ x | */missing\ makeinfo*) + AC_MSG_WARN([gprofng: makeinfo is missing. Info documentation will not be built.]) + ;; + *) +@@ -223,15 +231,14 @@ if test $cross_compiling = no; then + AC_MSG_WARN([gprofng: $MAKEINFO is too old. Info documentation will not be built.]) + MAKEINFO="@echo $MAKEINFO is too old, 6.5 or newer required; true" + ;; +- x* ) +- build_man=true +- ;; ++ x* ) build_doc=true ;; + esac + ;; + esac + AC_SUBST(MAKEINFO) + fi + AM_CONDITIONAL([BUILD_MAN], [test x$build_man = xtrue]) ++AM_CONDITIONAL([BUILD_DOC], [test x$build_doc = xtrue]) + + AC_SUBST(LD_NO_AS_NEEDED, [${no_as_needed}]) + AC_SUBST(GPROFNG_CFLAGS, [${gprofng_cflags}]) +--- a/gprofng/doc/Makefile.am ++++ b/gprofng/doc/Makefile.am +@@ -19,9 +19,31 @@ + + AUTOMAKE_OPTIONS = info-in-builddir foreign no-texinfo.tex + ++# Options to extract the man page ++MANCONF = -Dman ++ ++TEXI2POD = perl $(srcdir)/../../etc/texi2pod.pl $(AM_MAKEINFOFLAGS) ++POD2MAN = pod2man --center="User Commands" \ ++ --release="binutils-$(VERSION)" --section=1 ++ + info_TEXINFOS = gprofng.texi + gprofng_TEXINFOS = fdl.texi + TEXINFO_TEX = . + MAKEINFOHTML = $(MAKEINFO) --html --no-split + +-MAINTAINERCLEANFILES = gprofng.info ++man_MANS = gprofng.1 ++ ++# Build the man page from the texinfo file ++# The sed command removes the no-adjust Nroff command so that ++# the man output looks standard. ++gprofng.1: $(srcdir)/gprofng.texi ++ $(AM_V_GEN)touch $@ ++ $(AM_V_at)-$(TEXI2POD) $(MANCONF) < $(srcdir)/gprofng.texi > gprofng.pod ++ $(AM_V_at)-($(POD2MAN) gprofng.pod | \ ++ sed -e '/^.if n .na/d' > $@.tmp && \ ++ mv -f $@.tmp $@) || (rm -f $@.tmp && exit 1) ++ $(AM_V_at)rm -f gprofng.pod ++ ++MAINTAINERCLEANFILES = gprofng.info $(man_MANS) ++ ++info: $(man_MANS) +--- a/gprofng/doc/Makefile.in ++++ b/gprofng/doc/Makefile.in +@@ -182,7 +182,7 @@ am__can_run_installinfo = \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +-am__installdirs = "$(DESTDIR)$(infodir)" ++am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" + am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; + am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ +@@ -210,6 +210,9 @@ am__uninstall_files_from_dir = { \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } ++man1dir = $(mandir)/man1 ++NROFF = nroff ++MANS = $(man_MANS) + am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) + am__DIST_COMMON = $(gprofng_TEXINFOS) $(srcdir)/Makefile.in \ + $(top_srcdir)/../mkinstalldirs mdate-sh texinfo.tex +@@ -361,11 +364,19 @@ top_srcdir = @top_srcdir@ + zlibdir = @zlibdir@ + zlibinc = @zlibinc@ + AUTOMAKE_OPTIONS = info-in-builddir foreign no-texinfo.tex ++ ++# Options to extract the man page ++MANCONF = -Dman ++TEXI2POD = perl $(srcdir)/../../etc/texi2pod.pl $(AM_MAKEINFOFLAGS) ++POD2MAN = pod2man --center="User Commands" \ ++ --release="binutils-$(VERSION)" --section=1 ++ + info_TEXINFOS = gprofng.texi + gprofng_TEXINFOS = fdl.texi + TEXINFO_TEX = . + MAKEINFOHTML = $(MAKEINFO) --html --no-split +-MAINTAINERCLEANFILES = gprofng.info ++man_MANS = gprofng.1 ++MAINTAINERCLEANFILES = gprofng.info $(man_MANS) + all: all-am + + .SUFFIXES: +@@ -558,6 +569,49 @@ maintainer-clean-aminfo: + echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ + rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ + done ++install-man1: $(man_MANS) ++ @$(NORMAL_INSTALL) ++ @list1=''; \ ++ list2='$(man_MANS)'; \ ++ test -n "$(man1dir)" \ ++ && test -n "`echo $$list1$$list2`" \ ++ || exit 0; \ ++ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ ++ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ ++ { for i in $$list1; do echo "$$i"; done; \ ++ if test -n "$$list2"; then \ ++ for i in $$list2; do echo "$$i"; done \ ++ | sed -n '/\.1[a-z]*$$/p'; \ ++ fi; \ ++ } | while read p; do \ ++ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ ++ echo "$$d$$p"; echo "$$p"; \ ++ done | \ ++ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ ++ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ ++ sed 'N;N;s,\n, ,g' | { \ ++ list=; while read file base inst; do \ ++ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ ++ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ ++ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ ++ fi; \ ++ done; \ ++ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ ++ while read files; do \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ ++ done; } ++ ++uninstall-man1: ++ @$(NORMAL_UNINSTALL) ++ @list=''; test -n "$(man1dir)" || exit 0; \ ++ files=`{ for i in $$list; do echo "$$i"; done; \ ++ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ ++ sed -n '/\.1[a-z]*$$/p'; \ ++ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ ++ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ ++ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) + tags TAGS: + + ctags CTAGS: +@@ -600,9 +654,9 @@ distdir: $(DISTFILES) + dist-info + check-am: all-am + check: check-am +-all-am: Makefile $(INFO_DEPS) ++all-am: Makefile $(INFO_DEPS) $(MANS) + installdirs: +- for dir in "$(DESTDIR)$(infodir)"; do \ ++ for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done + install: install-am +@@ -652,11 +706,9 @@ html: html-am + + html-am: $(HTMLS) + +-info: info-am +- + info-am: $(INFO_DEPS) + +-install-data-am: install-info-am ++install-data-am: install-info-am install-man + + install-dvi: install-dvi-am + +@@ -739,7 +791,7 @@ install-info-am: $(INFO_DEPS) + install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ + done; \ + else : ; fi +-install-man: ++install-man: install-man1 + + install-pdf: install-pdf-am + +@@ -794,7 +846,9 @@ ps: ps-am + ps-am: $(PSS) + + uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \ +- uninstall-pdf-am uninstall-ps-am ++ uninstall-man uninstall-pdf-am uninstall-ps-am ++ ++uninstall-man: uninstall-man1 + + .MAKE: install-am install-strip + +@@ -804,19 +858,32 @@ uninstall-am: uninstall-dvi-am uninstall + html-am info info-am install install-am install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ +- install-info-am install-man install-pdf install-pdf-am \ +- install-ps install-ps-am install-strip installcheck \ +- installcheck-am installdirs maintainer-clean \ ++ install-info-am install-man install-man1 install-pdf \ ++ install-pdf-am install-ps install-ps-am install-strip \ ++ installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-aminfo maintainer-clean-generic \ + maintainer-clean-vti mostlyclean mostlyclean-aminfo \ + mostlyclean-generic mostlyclean-libtool mostlyclean-vti pdf \ + pdf-am ps ps-am tags-am uninstall uninstall-am \ + uninstall-dvi-am uninstall-html-am uninstall-info-am \ +- uninstall-pdf-am uninstall-ps-am ++ uninstall-man uninstall-man1 uninstall-pdf-am uninstall-ps-am + + .PRECIOUS: Makefile + + ++# Build the man page from the texinfo file ++# The sed command removes the no-adjust Nroff command so that ++# the man output looks standard. ++gprofng.1: $(srcdir)/gprofng.texi ++ $(AM_V_GEN)touch $@ ++ $(AM_V_at)-$(TEXI2POD) $(MANCONF) < $(srcdir)/gprofng.texi > gprofng.pod ++ $(AM_V_at)-($(POD2MAN) gprofng.pod | \ ++ sed -e '/^.if n .na/d' > $@.tmp && \ ++ mv -f $@.tmp $@) || (rm -f $@.tmp && exit 1) ++ $(AM_V_at)rm -f gprofng.pod ++ ++info: $(man_MANS) ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +--- a/gprofng/doc/gprofng.texi ++++ b/gprofng/doc/gprofng.texi +@@ -1,5 +1,8 @@ + \input texinfo @c -*-texinfo-*- + ++@c for $sect (qw(NAME SYNOPSIS TARGET DESCRIPTION OPTIONS ENVIRONMENT FILES ++@c BUGS NOTES FOOTNOTES SEEALSO AUTHOR COPYRIGHT)) { ++ + @c ---------------------------------------------------------------------------- + @c This is the Texinfo source file for the GPROFNG manual. + @c +@@ -59,6 +62,10 @@ gprofng + @cindex \label\, \string\ + @end macro + ++@macro gcctabopt{body} ++@code{\body\} ++@end macro ++ + @c -- Get the version information --------------------------------------------- + @include version.texi + +@@ -99,6 +106,20 @@ section entitled ``GNU Free Documentatio + @page + @vskip 0pt plus 1filll + @insertcopying ++ ++@c man begin COPYRIGHT ++ ++Copyright @copyright{} 2022-2023 Free Software Foundation, Inc. ++ ++Permission is granted to copy, distribute and/or modify this document ++under the terms of the GNU Free Documentation License, Version 1.3 ++or any later version published by the Free Software Foundation; ++with no Invariant Sections, with no Front-Cover Texts, and with no ++Back-Cover Texts. A copy of the license is included in the ++section entitled ``GNU Free Documentation License''. ++ ++@c man end ++ + @end titlepage + + @c -- Generate the Table of Contents ------------------------------------------ +@@ -163,6 +184,154 @@ Terminology + @end menu + @end ifinfo + ++@ifset man ++ ++@c man title gprofng the driver for the gprofng tool suite ++ ++@c man begin SYNOPSIS ++gprofng [OPTION(S)] ACTION [@b{QUALIFIER}] [ARGUMENTS] TARGET ++@c man end ++ ++@c man begin DESCRIPTION ++This is the driver for the GPROFNG tools suite to gather and analyze performance data. ++ ++The driver executes the action specified. An example of an action is @code{collect} ++to collect performance data. Depending on the action, a qualifier may be needed to ++define the command. Several qualifiers support options. The last item on the command ++is the target the command applies to. ++ ++For example, to collect performance data for an application called @code{a.out} and ++store the results in experiment directory @code{mydata.er}, the following command may ++be used: ++ ++@smallexample ++$ gprofng collect app -o mydata.er a.out ++@end smallexample ++ ++In this example, the action is @code{collect}, the qualifier is @code{app}, the single ++argument is @code{-o mydata.er} and the target is @code{a.out}. ++ ++If gprofng is executed without any additional option, action, or target, a usage ++overview is printed. ++ ++@c man end ++ ++@c man begin OPTIONS ++ ++@table @gcctabopt ++ ++@item @var{--version} ++print the version number and exit. ++ ++@item @var{--help} ++print usage information and exit. ++ ++@end table ++ ++@c man end ++ ++@c man begin NOTES ++ ++The gprofng driver supports the following commands. ++ ++@c The man pages for the commands below can be viewed using the command name with "gprofng" replaced by "gp" and the spaces replaced by a dash ("-"). For example the man page ++@c name for "gprofng collect app" is "gp-collect-app". ++ ++Collect performance data: ++ ++@table @code ++ ++@item gprofng collect app ++collect application performance data. ++ ++@end table ++ ++Display the performance results: ++ ++@table @code ++ ++@item gprofng display text ++display the performance data in ASCII format. ++ ++@item gprofng display html ++generate an HTML file from one or more experiments. ++ ++@end table ++ ++Miscellaneous commands: ++ ++@table @code ++ ++@item gprofng display src ++display source or disassembly with compiler annotations. ++ ++@item gprofng archive ++include binaries and source code in an experiment directory. ++ ++@end table ++ ++It is also possible to invoke the lower level commands directly, but since ++these are subject to change, in particular the options, we recommend to ++use the driver. ++ ++@c man end ++ ++@c man begin ENVIRONMENT ++The following environment variables are supported: ++ ++@table @code ++ ++@item @env{GPROFNG_MAX_CALL_STACK_DEPTH} ++set the depth of the call stack (default is 256). ++ ++@item @env{GPROFNG_USE_JAVA_OPTIONS} ++may be set when profiling a C/C++ application that uses dlopen() to execute Java code. ++ ++@item @env{GPROFNG_SSH_REMOTE_DISPLAY} ++use this variable to define the ssh command executed by the remote display tool. ++ ++@item @env{GPROFNG_SKIP_VALIDATION} ++set this variable to disable checking hardware, system, and Java versions. ++ ++@item @env{GPROFNG_ALLOW_CORE_DUMP} ++set this variable to allow a core file to be generated; otherwise an error report is created on /tmp. ++ ++@item @env{GPROFNG_ARCHIVE} ++use this variable to define the settings for automatic archiving upon experiment recording completion. ++ ++@item @env{GPROFNG_ARCHIVE_COMMON_DIR} ++set this variable to the location of the common archive. ++ ++@item @env{GPROFNG_JAVA_MAX_CALL_STACK_DEPTH} ++set the depth of the Java call stack; the default is 256; set to 0 to disable capturing of call stacks. ++ ++@item @env{GPROFNG_JAVA_NATIVE_MAX_CALL_STACK_DEPTH} ++set the depth of the Java native call stack; the default is 256; set to 0 to disable capturing of call stacks (JNI and assembly call stacks are not captured). ++ ++@end table ++ ++@c man end ++ ++@c man begin SEEALSO ++The man pages for the various gprofng commands are not available yet, but ++the @option{--help} option supported on each of the commands lists the options ++and provides more information. ++ ++For example this displays the options supported on the @command{gprofng collect app} ++command: ++ ++@smallexample ++$ gprofng collect app --help ++@end smallexample ++ ++The user guide is available as an Info entry for @file{gprofng}. ++@c man end ++ ++@end ifset ++ ++@c man begin DESCRIPTION ++@c man end ++ + @c -- A new node -------------------------------------------------------------- + @node Introduction + @chapter Introduction +--- a/gprofng/src/Makefile.am ++++ b/gprofng/src/Makefile.am +@@ -160,7 +160,7 @@ gp_display_text_LDADD = $(LIBGPROFNG) $( + + if BUILD_MAN + +-man_MANS = gprofng.1 \ ++man_MANS = \ + gp-archive.1 \ + gp-collect-app.1 \ + gp-display-src.1 \ +@@ -191,10 +191,6 @@ H2M_FILTER = | sed 's/\.TP/\.TP\n.B/' | + | sed 's/See also:/\.SH SEE ALSO/' | sed 's/Documentation:/.SH DOCUMENTATION/' \ + | sed 's/Limitations:/.SH LIMITATIONS/' + +-gprofng.1: $(srcdir)/gprofng.cc $(common_mandeps) | ./gprofng$(EXEEXT) +- $(AM_V_GEN)_BUILDING_MANPAGE=1 $(HELP2MAN) $(HELP2MAN_OPT) \ +- --name=$(TEXT_GPROFNG) ./gprofng$(EXEEXT) $(H2M_FILTER) > $@ +- + gp-archive.1: $(srcdir)/gp-archive.cc $(common_mandeps) | ./gp-archive$(EXEEXT) + $(AM_V_GEN)_BUILDING_MANPAGE=1 $(HELP2MAN) $(HELP2MAN_OPT) \ + --name=$(TEXT_GP_ARCHIVE) ./gp-archive$(EXEEXT) $(H2M_FILTER) > $@ +@@ -223,3 +219,5 @@ dist-hook: $(LIBGPROFNG) + + install-data-local: install-pkglibLTLIBRARIES + rm -f $(DESTDIR)/$(pkglibdir)/*.la $(DESTDIR)/$(pkglibdir)/*.a ++ ++$(srcdir)/DbeSession.cc: QLParser.tab.hh +--- a/gprofng/src/Makefile.in ++++ b/gprofng/src/Makefile.in +@@ -572,7 +572,7 @@ gp_display_src_SOURCES = gp-display-src. + gp_display_src_LDADD = $(LIBGPROFNG) $(CLOCK_GETTIME_LINK) $(ZLIB) + gp_display_text_SOURCES = gp-display-text.cc ipc.cc ipcio.cc + gp_display_text_LDADD = $(LIBGPROFNG) $(CLOCK_GETTIME_LINK) $(ZLIB) +-@BUILD_MAN_TRUE@man_MANS = gprofng.1 \ ++@BUILD_MAN_TRUE@man_MANS = \ + @BUILD_MAN_TRUE@ gp-archive.1 \ + @BUILD_MAN_TRUE@ gp-collect-app.1 \ + @BUILD_MAN_TRUE@ gp-display-src.1 \ +@@ -1176,10 +1176,6 @@ uninstall-man: uninstall-man1 + QLParser.tab.cc QLParser.tab.hh: QLParser.yy + $(BISON) $^ + +-@BUILD_MAN_TRUE@gprofng.1: $(srcdir)/gprofng.cc $(common_mandeps) | ./gprofng$(EXEEXT) +-@BUILD_MAN_TRUE@ $(AM_V_GEN)_BUILDING_MANPAGE=1 $(HELP2MAN) $(HELP2MAN_OPT) \ +-@BUILD_MAN_TRUE@ --name=$(TEXT_GPROFNG) ./gprofng$(EXEEXT) $(H2M_FILTER) > $@ +- + @BUILD_MAN_TRUE@gp-archive.1: $(srcdir)/gp-archive.cc $(common_mandeps) | ./gp-archive$(EXEEXT) + @BUILD_MAN_TRUE@ $(AM_V_GEN)_BUILDING_MANPAGE=1 $(HELP2MAN) $(HELP2MAN_OPT) \ + @BUILD_MAN_TRUE@ --name=$(TEXT_GP_ARCHIVE) ./gp-archive$(EXEEXT) $(H2M_FILTER) > $@ +@@ -1207,6 +1203,8 @@ dist-hook: $(LIBGPROFNG) + install-data-local: install-pkglibLTLIBRARIES + rm -f $(DESTDIR)/$(pkglibdir)/*.la $(DESTDIR)/$(pkglibdir)/*.a + ++$(srcdir)/DbeSession.cc: QLParser.tab.hh ++ + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: diff --git a/toolchain/binutils/patches/2.40/020-gprofng-PR30043-libgprofng.so.-are-installed-to-a-wr.patch b/toolchain/binutils/patches/2.40/020-gprofng-PR30043-libgprofng.so.-are-installed-to-a-wr.patch new file mode 100644 index 0000000000..d8d76a2961 --- /dev/null +++ b/toolchain/binutils/patches/2.40/020-gprofng-PR30043-libgprofng.so.-are-installed-to-a-wr.patch @@ -0,0 +1,212 @@ +From edd36b26f3506eeb259534ba2493e15c728cd280 Mon Sep 17 00:00:00 2001 +From: Vladimir Mezentsev +Date: Wed, 25 Jan 2023 19:21:38 -0800 +Subject: [PATCH 20/50] gprofng: PR30043 libgprofng.so.* are installed to a + wrong location + +gprofng/ChangeLog +2023-01-25 Vladimir Mezentsev + + PR gprofng/30043 + PR gprofng/28972 + * src/Makefile.am: Use lib_LTLIBRARIES instead of pkglib_LTLIBRARIES. + * src/Makefile.in: Rebuild. +--- + gprofng/src/Makefile.am | 7 +--- + gprofng/src/Makefile.in | 76 +++++++++++++++++++---------------------- + 2 files changed, 37 insertions(+), 46 deletions(-) + +--- a/gprofng/src/Makefile.am ++++ b/gprofng/src/Makefile.am +@@ -124,7 +124,7 @@ BUILT_SOURCES = QLParser.tab.hh + EXTRA_DIST = QLParser.yy $(man_MANS) + + +-pkglib_LTLIBRARIES = $(LIBGPROFNG) ++lib_LTLIBRARIES = $(LIBGPROFNG) + libgprofng_la_SOURCES = $(CCSOURCES) $(CSOURCES) + libgprofng_la_LDFLAGS = -version-info 0:0:0 + +@@ -215,9 +215,4 @@ endif + # so ensure that the necessary libraries are built at dist time. + dist-hook: $(LIBGPROFNG) + +-.PHONY: install-data-local +- +-install-data-local: install-pkglibLTLIBRARIES +- rm -f $(DESTDIR)/$(pkglibdir)/*.la $(DESTDIR)/$(pkglibdir)/*.a +- + $(srcdir)/DbeSession.cc: QLParser.tab.hh +--- a/gprofng/src/Makefile.in ++++ b/gprofng/src/Makefile.in +@@ -155,9 +155,9 @@ am__uninstall_files_from_dir = { \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +-am__installdirs = "$(DESTDIR)$(pkglibdir)" "$(DESTDIR)$(bindir)" \ ++am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \ + "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(dbedir)" +-LTLIBRARIES = $(pkglib_LTLIBRARIES) ++LTLIBRARIES = $(lib_LTLIBRARIES) + am__DEPENDENCIES_1 = + libgprofng_la_DEPENDENCIES = $(top_builddir)/../opcodes/libopcodes.la \ + $(top_builddir)/../bfd/libbfd.la $(am__DEPENDENCIES_1) +@@ -548,7 +548,7 @@ AM_CFLAGS = $(GPROFNG_CFLAGS) $(PTHREAD_ + AM_CXXFLAGS = $(AM_CFLAGS) + BUILT_SOURCES = QLParser.tab.hh + EXTRA_DIST = QLParser.yy $(man_MANS) +-pkglib_LTLIBRARIES = $(LIBGPROFNG) ++lib_LTLIBRARIES = $(LIBGPROFNG) + libgprofng_la_SOURCES = $(CCSOURCES) $(CSOURCES) + libgprofng_la_LDFLAGS = -version-info 0:0:0 + +@@ -636,33 +636,33 @@ $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $( + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(am__aclocal_m4_deps): + +-install-pkglibLTLIBRARIES: $(pkglib_LTLIBRARIES) ++install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) +- @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ ++ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ + if test -f $$p; then \ + list2="$$list2 $$p"; \ + else :; fi; \ + done; \ + test -z "$$list2" || { \ +- echo " $(MKDIR_P) '$(DESTDIR)$(pkglibdir)'"; \ +- $(MKDIR_P) "$(DESTDIR)$(pkglibdir)" || exit 1; \ +- echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(pkglibdir)'"; \ +- $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(pkglibdir)"; \ ++ echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ ++ $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ ++ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ ++ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } + +-uninstall-pkglibLTLIBRARIES: ++uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) +- @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ ++ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ +- echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(pkglibdir)/$$f'"; \ +- $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(pkglibdir)/$$f"; \ ++ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ ++ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ + done + +-clean-pkglibLTLIBRARIES: +- -test -z "$(pkglib_LTLIBRARIES)" || rm -f $(pkglib_LTLIBRARIES) +- @list='$(pkglib_LTLIBRARIES)'; \ ++clean-libLTLIBRARIES: ++ -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) ++ @list='$(lib_LTLIBRARIES)'; \ + locs=`for p in $$list; do echo $$p; done | \ + sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ + sort -u`; \ +@@ -672,7 +672,7 @@ clean-pkglibLTLIBRARIES: + } + + libgprofng.la: $(libgprofng_la_OBJECTS) $(libgprofng_la_DEPENDENCIES) $(EXTRA_libgprofng_la_DEPENDENCIES) +- $(AM_V_CXXLD)$(libgprofng_la_LINK) -rpath $(pkglibdir) $(libgprofng_la_OBJECTS) $(libgprofng_la_LIBADD) $(LIBS) ++ $(AM_V_CXXLD)$(libgprofng_la_LINK) -rpath $(libdir) $(libgprofng_la_OBJECTS) $(libgprofng_la_LIBADD) $(LIBS) + install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ +@@ -1039,8 +1039,10 @@ check-am: all-am + check: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) check-am + all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(MANS) $(DATA) ++install-binPROGRAMS: install-libLTLIBRARIES ++ + installdirs: +- for dir in "$(DESTDIR)$(pkglibdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(dbedir)"; do \ ++ for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(dbedir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done + install: $(BUILT_SOURCES) +@@ -1078,8 +1080,8 @@ maintainer-clean-generic: + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) + clean: clean-am + +-clean-am: clean-binPROGRAMS clean-generic clean-libtool \ +- clean-pkglibLTLIBRARIES mostlyclean-am ++clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \ ++ clean-libtool mostlyclean-am + + distclean: distclean-am + -rm -rf ./$(DEPDIR) +@@ -1099,13 +1101,13 @@ info: info-am + + info-am: + +-install-data-am: install-data-local install-dbeDATA install-man ++install-data-am: install-dbeDATA install-man + + install-dvi: install-dvi-am + + install-dvi-am: + +-install-exec-am: install-binPROGRAMS install-pkglibLTLIBRARIES ++install-exec-am: install-binPROGRAMS install-libLTLIBRARIES + + install-html: install-html-am + +@@ -1145,30 +1147,29 @@ ps: ps-am + + ps-am: + +-uninstall-am: uninstall-binPROGRAMS uninstall-dbeDATA uninstall-man \ +- uninstall-pkglibLTLIBRARIES ++uninstall-am: uninstall-binPROGRAMS uninstall-dbeDATA \ ++ uninstall-libLTLIBRARIES uninstall-man + + uninstall-man: uninstall-man1 + + .MAKE: all check install install-am install-strip + + .PHONY: CTAGS GTAGS TAGS all all-am check check-am clean \ +- clean-binPROGRAMS clean-generic clean-libtool \ +- clean-pkglibLTLIBRARIES cscopelist-am ctags ctags-am dist-hook \ +- distclean distclean-compile distclean-generic \ +- distclean-libtool distclean-tags distdir dvi dvi-am html \ +- html-am info info-am install install-am install-binPROGRAMS \ +- install-data install-data-am install-data-local \ +- install-dbeDATA install-dvi install-dvi-am install-exec \ +- install-exec-am install-html install-html-am install-info \ +- install-info-am install-man install-man1 install-pdf \ +- install-pdf-am install-pkglibLTLIBRARIES install-ps \ ++ clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \ ++ clean-libtool cscopelist-am ctags ctags-am dist-hook distclean \ ++ distclean-compile distclean-generic distclean-libtool \ ++ distclean-tags distdir dvi dvi-am html html-am info info-am \ ++ install install-am install-binPROGRAMS install-data \ ++ install-data-am install-dbeDATA install-dvi install-dvi-am \ ++ install-exec install-exec-am install-html install-html-am \ ++ install-info install-info-am install-libLTLIBRARIES \ ++ install-man install-man1 install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ + uninstall-am uninstall-binPROGRAMS uninstall-dbeDATA \ +- uninstall-man uninstall-man1 uninstall-pkglibLTLIBRARIES ++ uninstall-libLTLIBRARIES uninstall-man uninstall-man1 + + .PRECIOUS: Makefile + +@@ -1198,11 +1199,6 @@ QLParser.tab.cc QLParser.tab.hh: QLParse + # so ensure that the necessary libraries are built at dist time. + dist-hook: $(LIBGPROFNG) + +-.PHONY: install-data-local +- +-install-data-local: install-pkglibLTLIBRARIES +- rm -f $(DESTDIR)/$(pkglibdir)/*.la $(DESTDIR)/$(pkglibdir)/*.a +- + $(srcdir)/DbeSession.cc: QLParser.tab.hh + + # Tell versions [3.59,3.63) of GNU make to not export all variables. diff --git a/toolchain/binutils/patches/2.40/026-RISC-V-make-C-extension-JAL-available-again-for-32-b.patch b/toolchain/binutils/patches/2.40/026-RISC-V-make-C-extension-JAL-available-again-for-32-b.patch new file mode 100644 index 0000000000..4129a22906 --- /dev/null +++ b/toolchain/binutils/patches/2.40/026-RISC-V-make-C-extension-JAL-available-again-for-32-b.patch @@ -0,0 +1,115 @@ +From 27f59ec47a18277b6ea3548f405263ef558f5217 Mon Sep 17 00:00:00 2001 +From: Jan Beulich +Date: Tue, 31 Jan 2023 09:47:22 +0100 +Subject: [PATCH 26/50] RISC-V: make C-extension JAL available again for + (32-bit) assembly + +Along with the normal JAL alias, the C-extension one should have been +moved as well by 839189bc932e ("RISC-V: re-arrange opcode table for +consistent alias handling"), for the assembler to actually be able to +use it where/when possible. + +Since neither this nor any other compressed branch insn was being tested +so far, take the opportunity and introduce a new testcase covering those. +--- + gas/config/tc-riscv.c | 3 +++ + gas/testsuite/gas/riscv/c-branch-na.d | 20 ++++++++++++++++++++ + gas/testsuite/gas/riscv/c-branch.d | 19 +++++++++++++++++++ + gas/testsuite/gas/riscv/c-branch.s | 11 +++++++++++ + opcodes/riscv-opc.c | 2 +- + 5 files changed, 54 insertions(+), 1 deletion(-) + create mode 100644 gas/testsuite/gas/riscv/c-branch-na.d + create mode 100644 gas/testsuite/gas/riscv/c-branch.d + create mode 100644 gas/testsuite/gas/riscv/c-branch.s + +--- a/gas/config/tc-riscv.c ++++ b/gas/config/tc-riscv.c +@@ -2762,6 +2762,8 @@ riscv_ip (char *str, struct riscv_cl_ins + case 'p': + goto branch; + case 'a': ++ if (oparg == insn->args + 1) ++ goto jump_check_gpr; + goto jump; + case 'S': /* Floating-point RS1 x8-x15. */ + if (!reg_lookup (&asarg, RCLASS_FPR, ®no) +@@ -3271,6 +3273,7 @@ riscv_ip (char *str, struct riscv_cl_ins + but the 2nd (with 2 operands) might. */ + if (oparg == insn->args) + { ++ jump_check_gpr: + asargStart = asarg; + if (reg_lookup (&asarg, RCLASS_GPR, NULL) + && (*asarg == ',' || (ISSPACE (*asarg) && asarg[1] == ','))) +--- /dev/null ++++ b/gas/testsuite/gas/riscv/c-branch-na.d +@@ -0,0 +1,20 @@ ++#as: -march=rv32ic ++#source: c-branch.s ++#objdump: -drw -Mno-aliases ++ ++.*:[ ]+file format .* ++ ++ ++Disassembly of section .text: ++ ++0+ : ++[ ]+[0-9a-f]+:[ ]+c001[ ]+c\.beqz[ ]+s0,0 [ ]+0: R_RISCV_RVC_BRANCH .* ++[ ]+[0-9a-f]+:[ ]+dcfd[ ]+c\.beqz[ ]+s1,0 [ ]+2: R_RISCV_RVC_BRANCH .* ++[ ]+[0-9a-f]+:[ ]+fc75[ ]+c\.bnez[ ]+s0,0 [ ]+4: R_RISCV_RVC_BRANCH .* ++[ ]+[0-9a-f]+:[ ]+fced[ ]+c\.bnez[ ]+s1,0 [ ]+6: R_RISCV_RVC_BRANCH .* ++[ ]+[0-9a-f]+:[ ]+bfe5[ ]+c\.j[ ]+0 [ ]+8: R_RISCV_RVC_JUMP .* ++[ ]+[0-9a-f]+:[ ]+3fdd[ ]+c\.jal[ ]+0 [ ]+a: R_RISCV_RVC_JUMP .* ++[ ]+[0-9a-f]+:[ ]+9302[ ]+c\.jalr[ ]+t1 ++[ ]+[0-9a-f]+:[ ]+8382[ ]+c\.jr[ ]+t2 ++[ ]+[0-9a-f]+:[ ]+8082[ ]+c\.jr[ ]+ra ++#... +--- /dev/null ++++ b/gas/testsuite/gas/riscv/c-branch.d +@@ -0,0 +1,19 @@ ++#as: -march=rv64ic ++#objdump: -drw ++ ++.*:[ ]+file format .* ++ ++ ++Disassembly of section .text: ++ ++0+ : ++[ ]+[0-9a-f]+:[ ]+c001[ ]+beqz[ ]+s0,0 [ ]+0: R_RISCV_RVC_BRANCH .* ++[ ]+[0-9a-f]+:[ ]+dcfd[ ]+beqz[ ]+s1,0 [ ]+2: R_RISCV_RVC_BRANCH .* ++[ ]+[0-9a-f]+:[ ]+fc75[ ]+bnez[ ]+s0,0 [ ]+4: R_RISCV_RVC_BRANCH .* ++[ ]+[0-9a-f]+:[ ]+fced[ ]+bnez[ ]+s1,0 [ ]+6: R_RISCV_RVC_BRANCH .* ++[ ]+[0-9a-f]+:[ ]+bfe5[ ]+j[ ]+0 [ ]+8: R_RISCV_RVC_JUMP .* ++[ ]+[0-9a-f]+:[ ]+ff7ff0ef[ ]+jal[ ]+0 [ ]+a: R_RISCV_JAL .* ++[ ]+[0-9a-f]+:[ ]+9302[ ]+jalr[ ]+t1 ++[ ]+[0-9a-f]+:[ ]+8382[ ]+jr[ ]+t2 ++[ ]+[0-9a-f]+:[ ]+8082[ ]+ret ++#... +--- /dev/null ++++ b/gas/testsuite/gas/riscv/c-branch.s +@@ -0,0 +1,11 @@ ++ .text ++target: ++ beq x8, x0, target ++ beqz x9, target ++ bne x8, x0, target ++ bnez x9, target ++ j target ++ jal target ++ jalr x6 ++ jr x7 ++ ret +--- a/opcodes/riscv-opc.c ++++ b/opcodes/riscv-opc.c +@@ -340,9 +340,9 @@ const struct riscv_opcode riscv_opcodes[ + {"jalr", 0, INSN_CLASS_I, "d,s,j", MATCH_JALR, MASK_JALR, match_opcode, INSN_JSR }, + {"j", 0, INSN_CLASS_C, "Ca", MATCH_C_J, MASK_C_J, match_opcode, INSN_ALIAS|INSN_BRANCH }, + {"j", 0, INSN_CLASS_I, "a", MATCH_JAL, MASK_JAL|MASK_RD, match_opcode, INSN_ALIAS|INSN_BRANCH }, ++{"jal", 32, INSN_CLASS_C, "Ca", MATCH_C_JAL, MASK_C_JAL, match_opcode, INSN_ALIAS|INSN_JSR }, + {"jal", 0, INSN_CLASS_I, "a", MATCH_JAL|(X_RA << OP_SH_RD), MASK_JAL|MASK_RD, match_opcode, INSN_ALIAS|INSN_JSR }, + {"jal", 0, INSN_CLASS_I, "d,a", MATCH_JAL, MASK_JAL, match_opcode, INSN_JSR }, +-{"jal", 32, INSN_CLASS_C, "Ca", MATCH_C_JAL, MASK_C_JAL, match_opcode, INSN_ALIAS|INSN_JSR }, + {"call", 0, INSN_CLASS_I, "d,c", (X_T1 << OP_SH_RS1), (int) M_CALL, match_never, INSN_MACRO }, + {"call", 0, INSN_CLASS_I, "c", (X_RA << OP_SH_RS1)|(X_RA << OP_SH_RD), (int) M_CALL, match_never, INSN_MACRO }, + {"tail", 0, INSN_CLASS_I, "c", (X_T1 << OP_SH_RS1), (int) M_CALL, match_never, INSN_MACRO }, diff --git a/toolchain/binutils/patches/2.40/034-bpf-fix-error-conversion-from-long-unsigned-int-to-u.patch b/toolchain/binutils/patches/2.40/034-bpf-fix-error-conversion-from-long-unsigned-int-to-u.patch new file mode 100644 index 0000000000..d4317cdb0f --- /dev/null +++ b/toolchain/binutils/patches/2.40/034-bpf-fix-error-conversion-from-long-unsigned-int-to-u.patch @@ -0,0 +1,209 @@ +From 3e888977f165594cf44dbe8f67e3a4960b22c11f Mon Sep 17 00:00:00 2001 +From: "Guillermo E. Martinez" +Date: Fri, 3 Feb 2023 11:17:49 -0600 +Subject: [PATCH 34/50] bpf: fix error conversion from long unsigned int to + unsigned int [-Werror=overflow] +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Regenerating BPF target using the maintainer mode emits: +.../opcodes/bpf-opc.c:57:11: error: conversion from ‘long unsigned int’ to ‘unsigned int’ changes value from ‘18446744073709486335’ to ‘4294902015’ [-Werror=overflow] + 57 | 64, 64, 0xffffffffffff00ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } + +The use of a narrow size to handle the mask CGEN in instruction format +is causing this error. Additionally eBPF `call' instructions +constructed by expressions using symbols (BPF_PSEUDO_CALL) emits +annotations in `src' field of the instruction, used to identify BPF +target endianness. + +cpu/ + * bpf.cpu (define-call-insn): Remove `src' field from + instruction mask. + +include/ + *opcode/cge.h (CGEN_IFMT): Adjust mask bit width. + +opcodes/ + * bpf-opc.c: Regenerate. + +(cherry picked from commit 7f6ebecd56e690012b05af0a492280765b17f186) +--- + cpu/bpf.cpu | 2 +- + include/opcode/cgen.h | 2 +- + opcodes/bpf-opc.c | 54 +++++++++++++++++++++++-------------------- + opcodes/cgen-dis.c | 2 +- + 4 files changed, 32 insertions(+), 28 deletions(-) + +--- a/cpu/bpf.cpu ++++ b/cpu/bpf.cpu +@@ -768,7 +768,7 @@ + "call" + (endian-isas x-endian) + "call $disp32" +- (+ disp32 (f-offset16 0) (f-regs 0) ++ (+ disp32 (f-offset16 0) (.sym src x-endian) ((.sym f-dst x-endian) 0) + OP_CLASS_JMP OP_SRC_K OP_CODE_CALL) + (c-call VOID + "bpfbf_call" disp32 (ifield (.sym f-src x-endian))) +--- a/include/opcode/cgen.h ++++ b/include/opcode/cgen.h +@@ -914,7 +914,7 @@ typedef struct + Each insn's value is stored with the insn. + The first step in recognizing an insn for disassembly is + (opcode & mask) == value. */ +- CGEN_INSN_INT mask; ++ CGEN_INSN_LGUINT mask; + #define CGEN_IFMT_MASK(ifmt) ((ifmt)->mask) + + /* Instruction fields. +--- a/opcodes/bpf-opc.c ++++ b/opcodes/bpf-opc.c +@@ -50,99 +50,103 @@ static const CGEN_IFMT ifmt_empty ATTRIB + }; + + static const CGEN_IFMT ifmt_addile ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xfffff0ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_addrle ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xffffffffffff00ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_negle ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xfffffffffffff0ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_addibe ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xffff0fff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_addrbe ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xffffffffffff00ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_negbe ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xffffffffffff0fff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_endlele ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xfffff0ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_endlebe ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xffff0fff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_lddwle ATTRIBUTE_UNUSED = { +- 64, 128, 0xff, { { F (F_IMM64) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_DSTLE) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 128, 0xfffff0ff, { { F (F_IMM64) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_DSTLE) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_lddwbe ATTRIBUTE_UNUSED = { +- 64, 128, 0xff, { { F (F_IMM64) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_SRCBE) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 128, 0xffff0fff, { { F (F_IMM64) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_SRCBE) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_ldabsw ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_REGS) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xffffffff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_REGS) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_ldindwle ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_DSTLE) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xffff0fff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_DSTLE) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_ldindwbe ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_SRCBE) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xfffff0ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_SRCBE) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_ldxwle ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_DSTLE) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xffffffff000000ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_DSTLE) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_ldxwbe ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_SRCBE) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xffffffff000000ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_SRCBE) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_stble ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_DSTLE) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xf0ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_DSTLE) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_stbbe ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_SRCBE) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xfff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_SRCBE) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_jeqile ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xf0ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_jeqrle ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xffffffff000000ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_jeqibe ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xfff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_jeqrbe ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xffffffff000000ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_callle ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_REGS) }, { F (F_OP_CODE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xffff0fff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } ++}; ++ ++static const CGEN_IFMT ifmt_callbe ATTRIBUTE_UNUSED = { ++ 64, 64, 0xfffff0ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_ja ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_REGS) }, { F (F_OP_CODE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xffffffff0000ffff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_REGS) }, { F (F_OP_CODE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } + }; + + static const CGEN_IFMT ifmt_exit ATTRIBUTE_UNUSED = { +- 64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_REGS) }, { F (F_OP_CODE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } ++ 64, 64, 0xffffffffffffffff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_REGS) }, { F (F_OP_CODE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } + }; + + #undef F +@@ -1646,7 +1650,7 @@ static const CGEN_OPCODE bpf_cgen_insn_o + { + { 0, 0, 0, 0 }, + { { MNEM, ' ', OP (DISP32), 0 } }, +- & ifmt_callle, { 0x85 } ++ & ifmt_callbe, { 0x85 } + }, + /* call $dstle */ + { +--- a/opcodes/cgen-dis.c ++++ b/opcodes/cgen-dis.c +@@ -39,7 +39,7 @@ static void add_insn_to_hash_chain (CG + static int + count_decodable_bits (const CGEN_INSN *insn) + { +- unsigned mask = CGEN_INSN_BASE_MASK (insn); ++ CGEN_INSN_LGUINT mask = CGEN_INSN_BASE_MASK (insn); + #if GCC_VERSION >= 3004 + return __builtin_popcount (mask); + #else diff --git a/toolchain/binutils/patches/2.40/035-Pass-JANSSON_LIBS-and-ZSTD_LIBS-to-ld-bootstrap-boot.patch b/toolchain/binutils/patches/2.40/035-Pass-JANSSON_LIBS-and-ZSTD_LIBS-to-ld-bootstrap-boot.patch new file mode 100644 index 0000000000..3741c08a0c --- /dev/null +++ b/toolchain/binutils/patches/2.40/035-Pass-JANSSON_LIBS-and-ZSTD_LIBS-to-ld-bootstrap-boot.patch @@ -0,0 +1,50 @@ +From e1815414077347097e5bf0d75162add955e241d9 Mon Sep 17 00:00:00 2001 +From: Romain Geissler +Date: Sun, 5 Feb 2023 13:56:34 +0000 +Subject: [PATCH 35/50] Pass $JANSSON_LIBS and $ZSTD_LIBS to + ld-bootstrap/bootrap.exp + +--- + ld/Makefile.am | 1 + + ld/Makefile.in | 1 + + ld/testsuite/ld-bootstrap/bootstrap.exp | 4 ++-- + 3 files changed, 4 insertions(+), 2 deletions(-) + +--- a/ld/Makefile.am ++++ b/ld/Makefile.am +@@ -992,6 +992,7 @@ check-DEJAGNU: site.exp + CXXFLAGS_FOR_TARGET="$(CXXFLAGS_FOR_TARGET)" \ + OFILES="$(OFILES)" BFDLIB="$(TESTBFDLIB)" CTFLIB="$(TESTCTFLIB) $(ZLIB)" \ + SFRAMELIB="$(TESTSFRAMELIB)" \ ++ JANSSON_LIBS="$(JANSSON_LIBS)" ZSTD_LIBS="$(ZSTD_LIBS)" \ + LIBIBERTY="$(LIBIBERTY) $(LIBINTL)" LIBS="$(LIBS)" \ + DO_COMPARE="`echo '$(do_compare)' | sed -e 's,\\$$,,g'`" \ + $(RUNTESTFLAGS); \ +--- a/ld/Makefile.in ++++ b/ld/Makefile.in +@@ -2645,6 +2645,7 @@ check-DEJAGNU: site.exp + CXXFLAGS_FOR_TARGET="$(CXXFLAGS_FOR_TARGET)" \ + OFILES="$(OFILES)" BFDLIB="$(TESTBFDLIB)" CTFLIB="$(TESTCTFLIB) $(ZLIB)" \ + SFRAMELIB="$(TESTSFRAMELIB)" \ ++ JANSSON_LIBS="$(JANSSON_LIBS)" ZSTD_LIBS="$(ZSTD_LIBS)" \ + LIBIBERTY="$(LIBIBERTY) $(LIBINTL)" LIBS="$(LIBS)" \ + DO_COMPARE="`echo '$(do_compare)' | sed -e 's,\\$$,,g'`" \ + $(RUNTESTFLAGS); \ +--- a/ld/testsuite/ld-bootstrap/bootstrap.exp ++++ b/ld/testsuite/ld-bootstrap/bootstrap.exp +@@ -162,13 +162,13 @@ foreach flags $test_flags { + } + + if { [lindex [remote_exec build grep "-q \"HAVE_ZSTD 1\" config.h" ] 0] == 0 } then { +- set extralibs "$extralibs -lzstd" ++ set extralibs "$extralibs $ZSTD_LIBS" + } + + # Check if the system's jansson library is used. If so, the object files will + # be using symbols from it, so link to it. + if { [lindex [remote_exec build grep "-q \"HAVE_JANSSON 1\" config.h" ] 0] == 0 } then { +- set extralibs "$extralibs -ljansson" ++ set extralibs "$extralibs $JANSSON_LIBS" + } + + # Plugin support requires linking with libdl. diff --git a/toolchain/binutils/patches/2.40/036-Regen-config-files.patch b/toolchain/binutils/patches/2.40/036-Regen-config-files.patch new file mode 100644 index 0000000000..1c80dde310 --- /dev/null +++ b/toolchain/binutils/patches/2.40/036-Regen-config-files.patch @@ -0,0 +1,714 @@ +From 1fc096a4c590f28e0efb1823cdca653f2db9de74 Mon Sep 17 00:00:00 2001 +From: Alan Modra +Date: Mon, 6 Feb 2023 10:48:59 +1030 +Subject: [PATCH 36/50] Regen config files + +For the version update to 2.40.0 +--- + bfd/configure | 20 ++++++++++---------- + binutils/configure | 20 ++++++++++---------- + gas/configure | 20 ++++++++++---------- + gprof/configure | 20 ++++++++++---------- + gprofng/configure | 20 ++++++++++---------- + gprofng/doc/version.texi | 8 ++++---- + gprofng/libcollector/configure | 20 ++++++++++---------- + intl/configure | 3 +++ + ld/configure | 20 ++++++++++---------- + opcodes/configure | 20 ++++++++++---------- + 10 files changed, 87 insertions(+), 84 deletions(-) + +--- a/bfd/configure ++++ b/bfd/configure +@@ -1,6 +1,6 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.69 for bfd 2.40. ++# Generated by GNU Autoconf 2.69 for bfd 2.40.0. + # + # + # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +@@ -587,8 +587,8 @@ MAKEFLAGS= + # Identity of this package. + PACKAGE_NAME='bfd' + PACKAGE_TARNAME='bfd' +-PACKAGE_VERSION='2.40' +-PACKAGE_STRING='bfd 2.40' ++PACKAGE_VERSION='2.40.0' ++PACKAGE_STRING='bfd 2.40.0' + PACKAGE_BUGREPORT='' + PACKAGE_URL='' + +@@ -1400,7 +1400,7 @@ if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +-\`configure' configures bfd 2.40 to adapt to many kinds of systems. ++\`configure' configures bfd 2.40.0 to adapt to many kinds of systems. + + Usage: $0 [OPTION]... [VAR=VALUE]... + +@@ -1471,7 +1471,7 @@ fi + + if test -n "$ac_init_help"; then + case $ac_init_help in +- short | recursive ) echo "Configuration of bfd 2.40:";; ++ short | recursive ) echo "Configuration of bfd 2.40.0:";; + esac + cat <<\_ACEOF + +@@ -1608,7 +1608,7 @@ fi + test -n "$ac_init_help" && exit $ac_status + if $ac_init_version; then + cat <<\_ACEOF +-bfd configure 2.40 ++bfd configure 2.40.0 + generated by GNU Autoconf 2.69 + + Copyright (C) 2012 Free Software Foundation, Inc. +@@ -2202,7 +2202,7 @@ cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + +-It was created by bfd $as_me 2.40, which was ++It was created by bfd $as_me 2.40.0, which was + generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ +@@ -3184,7 +3184,7 @@ fi + + # Define the identity of the package. + PACKAGE='bfd' +- VERSION='2.40' ++ VERSION='2.40.0' + + + cat >>confdefs.h <<_ACEOF +@@ -15906,7 +15906,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri + # report actual input values of CONFIG_FILES etc. instead of their + # values after options handling. + ac_log=" +-This file was extended by bfd $as_me 2.40, which was ++This file was extended by bfd $as_me 2.40.0, which was + generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES +@@ -15972,7 +15972,7 @@ _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" + ac_cs_version="\\ +-bfd config.status 2.40 ++bfd config.status 2.40.0 + configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +--- a/binutils/configure ++++ b/binutils/configure +@@ -1,6 +1,6 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.69 for binutils 2.40. ++# Generated by GNU Autoconf 2.69 for binutils 2.40.0. + # + # + # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +@@ -587,8 +587,8 @@ MAKEFLAGS= + # Identity of this package. + PACKAGE_NAME='binutils' + PACKAGE_TARNAME='binutils' +-PACKAGE_VERSION='2.40' +-PACKAGE_STRING='binutils 2.40' ++PACKAGE_VERSION='2.40.0' ++PACKAGE_STRING='binutils 2.40.0' + PACKAGE_BUGREPORT='' + PACKAGE_URL='' + +@@ -1401,7 +1401,7 @@ if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +-\`configure' configures binutils 2.40 to adapt to many kinds of systems. ++\`configure' configures binutils 2.40.0 to adapt to many kinds of systems. + + Usage: $0 [OPTION]... [VAR=VALUE]... + +@@ -1472,7 +1472,7 @@ fi + + if test -n "$ac_init_help"; then + case $ac_init_help in +- short | recursive ) echo "Configuration of binutils 2.40:";; ++ short | recursive ) echo "Configuration of binutils 2.40.0:";; + esac + cat <<\_ACEOF + +@@ -1631,7 +1631,7 @@ fi + test -n "$ac_init_help" && exit $ac_status + if $ac_init_version; then + cat <<\_ACEOF +-binutils configure 2.40 ++binutils configure 2.40.0 + generated by GNU Autoconf 2.69 + + Copyright (C) 2012 Free Software Foundation, Inc. +@@ -2099,7 +2099,7 @@ cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + +-It was created by binutils $as_me 2.40, which was ++It was created by binutils $as_me 2.40.0, which was + generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ +@@ -3081,7 +3081,7 @@ fi + + # Define the identity of the package. + PACKAGE='binutils' +- VERSION='2.40' ++ VERSION='2.40.0' + + + cat >>confdefs.h <<_ACEOF +@@ -15326,7 +15326,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri + # report actual input values of CONFIG_FILES etc. instead of their + # values after options handling. + ac_log=" +-This file was extended by binutils $as_me 2.40, which was ++This file was extended by binutils $as_me 2.40.0, which was + generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES +@@ -15392,7 +15392,7 @@ _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" + ac_cs_version="\\ +-binutils config.status 2.40 ++binutils config.status 2.40.0 + configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +--- a/gas/configure ++++ b/gas/configure +@@ -1,6 +1,6 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.69 for gas 2.40. ++# Generated by GNU Autoconf 2.69 for gas 2.40.0. + # + # + # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +@@ -587,8 +587,8 @@ MAKEFLAGS= + # Identity of this package. + PACKAGE_NAME='gas' + PACKAGE_TARNAME='gas' +-PACKAGE_VERSION='2.40' +-PACKAGE_STRING='gas 2.40' ++PACKAGE_VERSION='2.40.0' ++PACKAGE_STRING='gas 2.40.0' + PACKAGE_BUGREPORT='' + PACKAGE_URL='' + +@@ -1381,7 +1381,7 @@ if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +-\`configure' configures gas 2.40 to adapt to many kinds of systems. ++\`configure' configures gas 2.40.0 to adapt to many kinds of systems. + + Usage: $0 [OPTION]... [VAR=VALUE]... + +@@ -1452,7 +1452,7 @@ fi + + if test -n "$ac_init_help"; then + case $ac_init_help in +- short | recursive ) echo "Configuration of gas 2.40:";; ++ short | recursive ) echo "Configuration of gas 2.40.0:";; + esac + cat <<\_ACEOF + +@@ -1600,7 +1600,7 @@ fi + test -n "$ac_init_help" && exit $ac_status + if $ac_init_version; then + cat <<\_ACEOF +-gas configure 2.40 ++gas configure 2.40.0 + generated by GNU Autoconf 2.69 + + Copyright (C) 2012 Free Software Foundation, Inc. +@@ -2011,7 +2011,7 @@ cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + +-It was created by gas $as_me 2.40, which was ++It was created by gas $as_me 2.40.0, which was + generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ +@@ -2990,7 +2990,7 @@ fi + + # Define the identity of the package. + PACKAGE='gas' +- VERSION='2.40' ++ VERSION='2.40.0' + + + cat >>confdefs.h <<_ACEOF +@@ -14910,7 +14910,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri + # report actual input values of CONFIG_FILES etc. instead of their + # values after options handling. + ac_log=" +-This file was extended by gas $as_me 2.40, which was ++This file was extended by gas $as_me 2.40.0, which was + generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES +@@ -14976,7 +14976,7 @@ _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" + ac_cs_version="\\ +-gas config.status 2.40 ++gas config.status 2.40.0 + configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +--- a/gprof/configure ++++ b/gprof/configure +@@ -1,6 +1,6 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.69 for gprof 2.40. ++# Generated by GNU Autoconf 2.69 for gprof 2.40.0. + # + # + # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +@@ -587,8 +587,8 @@ MAKEFLAGS= + # Identity of this package. + PACKAGE_NAME='gprof' + PACKAGE_TARNAME='gprof' +-PACKAGE_VERSION='2.40' +-PACKAGE_STRING='gprof 2.40' ++PACKAGE_VERSION='2.40.0' ++PACKAGE_STRING='gprof 2.40.0' + PACKAGE_BUGREPORT='' + PACKAGE_URL='' + +@@ -1338,7 +1338,7 @@ if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +-\`configure' configures gprof 2.40 to adapt to many kinds of systems. ++\`configure' configures gprof 2.40.0 to adapt to many kinds of systems. + + Usage: $0 [OPTION]... [VAR=VALUE]... + +@@ -1409,7 +1409,7 @@ fi + + if test -n "$ac_init_help"; then + case $ac_init_help in +- short | recursive ) echo "Configuration of gprof 2.40:";; ++ short | recursive ) echo "Configuration of gprof 2.40.0:";; + esac + cat <<\_ACEOF + +@@ -1520,7 +1520,7 @@ fi + test -n "$ac_init_help" && exit $ac_status + if $ac_init_version; then + cat <<\_ACEOF +-gprof configure 2.40 ++gprof configure 2.40.0 + generated by GNU Autoconf 2.69 + + Copyright (C) 2012 Free Software Foundation, Inc. +@@ -1885,7 +1885,7 @@ cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + +-It was created by gprof $as_me 2.40, which was ++It was created by gprof $as_me 2.40.0, which was + generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ +@@ -2864,7 +2864,7 @@ fi + + # Define the identity of the package. + PACKAGE='gprof' +- VERSION='2.40' ++ VERSION='2.40.0' + + + cat >>confdefs.h <<_ACEOF +@@ -12572,7 +12572,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri + # report actual input values of CONFIG_FILES etc. instead of their + # values after options handling. + ac_log=" +-This file was extended by gprof $as_me 2.40, which was ++This file was extended by gprof $as_me 2.40.0, which was + generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES +@@ -12638,7 +12638,7 @@ _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" + ac_cs_version="\\ +-gprof config.status 2.40 ++gprof config.status 2.40.0 + configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +--- a/gprofng/configure ++++ b/gprofng/configure +@@ -1,6 +1,6 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.69 for gprofng 2.40. ++# Generated by GNU Autoconf 2.69 for gprofng 2.40.0. + # + # + # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +@@ -587,8 +587,8 @@ MAKEFLAGS= + # Identity of this package. + PACKAGE_NAME='gprofng' + PACKAGE_TARNAME='gprofng' +-PACKAGE_VERSION='2.40' +-PACKAGE_STRING='gprofng 2.40' ++PACKAGE_VERSION='2.40.0' ++PACKAGE_STRING='gprofng 2.40.0' + PACKAGE_BUGREPORT='' + PACKAGE_URL='' + +@@ -1364,7 +1364,7 @@ if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +-\`configure' configures gprofng 2.40 to adapt to many kinds of systems. ++\`configure' configures gprofng 2.40.0 to adapt to many kinds of systems. + + Usage: $0 [OPTION]... [VAR=VALUE]... + +@@ -1435,7 +1435,7 @@ fi + + if test -n "$ac_init_help"; then + case $ac_init_help in +- short | recursive ) echo "Configuration of gprofng 2.40:";; ++ short | recursive ) echo "Configuration of gprofng 2.40.0:";; + esac + cat <<\_ACEOF + +@@ -1549,7 +1549,7 @@ fi + test -n "$ac_init_help" && exit $ac_status + if $ac_init_version; then + cat <<\_ACEOF +-gprofng configure 2.40 ++gprofng configure 2.40.0 + generated by GNU Autoconf 2.69 + + Copyright (C) 2012 Free Software Foundation, Inc. +@@ -2081,7 +2081,7 @@ cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + +-It was created by gprofng $as_me 2.40, which was ++It was created by gprofng $as_me 2.40.0, which was + generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ +@@ -3054,7 +3054,7 @@ fi + + # Define the identity of the package. + PACKAGE='gprofng' +- VERSION='2.40' ++ VERSION='2.40.0' + + + cat >>confdefs.h <<_ACEOF +@@ -17528,7 +17528,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri + # report actual input values of CONFIG_FILES etc. instead of their + # values after options handling. + ac_log=" +-This file was extended by gprofng $as_me 2.40, which was ++This file was extended by gprofng $as_me 2.40.0, which was + generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES +@@ -17594,7 +17594,7 @@ _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" + ac_cs_version="\\ +-gprofng config.status 2.40 ++gprofng config.status 2.40.0 + configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +--- a/gprofng/doc/version.texi ++++ b/gprofng/doc/version.texi +@@ -1,4 +1,4 @@ +-@set UPDATED 5 January 2023 +-@set UPDATED-MONTH January 2023 +-@set EDITION 2.40 +-@set VERSION 2.40 ++@set UPDATED 1 February 2023 ++@set UPDATED-MONTH February 2023 ++@set EDITION 2.40.0 ++@set VERSION 2.40.0 +--- a/gprofng/libcollector/configure ++++ b/gprofng/libcollector/configure +@@ -1,6 +1,6 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.69 for gprofng 2.40. ++# Generated by GNU Autoconf 2.69 for gprofng 2.40.0. + # + # + # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +@@ -587,8 +587,8 @@ MAKEFLAGS= + # Identity of this package. + PACKAGE_NAME='gprofng' + PACKAGE_TARNAME='gprofng' +-PACKAGE_VERSION='2.40' +-PACKAGE_STRING='gprofng 2.40' ++PACKAGE_VERSION='2.40.0' ++PACKAGE_STRING='gprofng 2.40.0' + PACKAGE_BUGREPORT='' + PACKAGE_URL='' + +@@ -1325,7 +1325,7 @@ if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +-\`configure' configures gprofng 2.40 to adapt to many kinds of systems. ++\`configure' configures gprofng 2.40.0 to adapt to many kinds of systems. + + Usage: $0 [OPTION]... [VAR=VALUE]... + +@@ -1396,7 +1396,7 @@ fi + + if test -n "$ac_init_help"; then + case $ac_init_help in +- short | recursive ) echo "Configuration of gprofng 2.40:";; ++ short | recursive ) echo "Configuration of gprofng 2.40.0:";; + esac + cat <<\_ACEOF + +@@ -1505,7 +1505,7 @@ fi + test -n "$ac_init_help" && exit $ac_status + if $ac_init_version; then + cat <<\_ACEOF +-gprofng configure 2.40 ++gprofng configure 2.40.0 + generated by GNU Autoconf 2.69 + + Copyright (C) 2012 Free Software Foundation, Inc. +@@ -1991,7 +1991,7 @@ cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + +-It was created by gprofng $as_me 2.40, which was ++It was created by gprofng $as_me 2.40.0, which was + generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ +@@ -2968,7 +2968,7 @@ fi + + # Define the identity of the package. + PACKAGE='gprofng' +- VERSION='2.40' ++ VERSION='2.40.0' + + + cat >>confdefs.h <<_ACEOF +@@ -16098,7 +16098,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri + # report actual input values of CONFIG_FILES etc. instead of their + # values after options handling. + ac_log=" +-This file was extended by gprofng $as_me 2.40, which was ++This file was extended by gprofng $as_me 2.40.0, which was + generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES +@@ -16164,7 +16164,7 @@ _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" + ac_cs_version="\\ +-gprofng config.status 2.40 ++gprofng config.status 2.40.0 + configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +--- a/intl/configure ++++ b/intl/configure +@@ -6857,6 +6857,9 @@ case "${host}" in + # sets the default TLS model and affects inlining. + PICFLAG=-fPIC + ;; ++ loongarch*-*-*) ++ PICFLAG=-fpic ++ ;; + mips-sgi-irix6*) + # PIC is the default. + ;; +--- a/ld/configure ++++ b/ld/configure +@@ -1,6 +1,6 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.69 for ld 2.40. ++# Generated by GNU Autoconf 2.69 for ld 2.40.0. + # + # + # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +@@ -587,8 +587,8 @@ MAKEFLAGS= + # Identity of this package. + PACKAGE_NAME='ld' + PACKAGE_TARNAME='ld' +-PACKAGE_VERSION='2.40' +-PACKAGE_STRING='ld 2.40' ++PACKAGE_VERSION='2.40.0' ++PACKAGE_STRING='ld 2.40.0' + PACKAGE_BUGREPORT='' + PACKAGE_URL='' + +@@ -1423,7 +1423,7 @@ if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +-\`configure' configures ld 2.40 to adapt to many kinds of systems. ++\`configure' configures ld 2.40.0 to adapt to many kinds of systems. + + Usage: $0 [OPTION]... [VAR=VALUE]... + +@@ -1494,7 +1494,7 @@ fi + + if test -n "$ac_init_help"; then + case $ac_init_help in +- short | recursive ) echo "Configuration of ld 2.40:";; ++ short | recursive ) echo "Configuration of ld 2.40.0:";; + esac + cat <<\_ACEOF + +@@ -1661,7 +1661,7 @@ fi + test -n "$ac_init_help" && exit $ac_status + if $ac_init_version; then + cat <<\_ACEOF +-ld configure 2.40 ++ld configure 2.40.0 + generated by GNU Autoconf 2.69 + + Copyright (C) 2012 Free Software Foundation, Inc. +@@ -2376,7 +2376,7 @@ cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + +-It was created by ld $as_me 2.40, which was ++It was created by ld $as_me 2.40.0, which was + generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ +@@ -3359,7 +3359,7 @@ fi + + # Define the identity of the package. + PACKAGE='ld' +- VERSION='2.40' ++ VERSION='2.40.0' + + + cat >>confdefs.h <<_ACEOF +@@ -18083,7 +18083,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri + # report actual input values of CONFIG_FILES etc. instead of their + # values after options handling. + ac_log=" +-This file was extended by ld $as_me 2.40, which was ++This file was extended by ld $as_me 2.40.0, which was + generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES +@@ -18149,7 +18149,7 @@ _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" + ac_cs_version="\\ +-ld config.status 2.40 ++ld config.status 2.40.0 + configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +--- a/opcodes/configure ++++ b/opcodes/configure +@@ -1,6 +1,6 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.69 for opcodes 2.40. ++# Generated by GNU Autoconf 2.69 for opcodes 2.40.0. + # + # + # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +@@ -587,8 +587,8 @@ MAKEFLAGS= + # Identity of this package. + PACKAGE_NAME='opcodes' + PACKAGE_TARNAME='opcodes' +-PACKAGE_VERSION='2.40' +-PACKAGE_STRING='opcodes 2.40' ++PACKAGE_VERSION='2.40.0' ++PACKAGE_STRING='opcodes 2.40.0' + PACKAGE_BUGREPORT='' + PACKAGE_URL='' + +@@ -1360,7 +1360,7 @@ if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +-\`configure' configures opcodes 2.40 to adapt to many kinds of systems. ++\`configure' configures opcodes 2.40.0 to adapt to many kinds of systems. + + Usage: $0 [OPTION]... [VAR=VALUE]... + +@@ -1431,7 +1431,7 @@ fi + + if test -n "$ac_init_help"; then + case $ac_init_help in +- short | recursive ) echo "Configuration of opcodes 2.40:";; ++ short | recursive ) echo "Configuration of opcodes 2.40.0:";; + esac + cat <<\_ACEOF + +@@ -1545,7 +1545,7 @@ fi + test -n "$ac_init_help" && exit $ac_status + if $ac_init_version; then + cat <<\_ACEOF +-opcodes configure 2.40 ++opcodes configure 2.40.0 + generated by GNU Autoconf 2.69 + + Copyright (C) 2012 Free Software Foundation, Inc. +@@ -2139,7 +2139,7 @@ cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + +-It was created by opcodes $as_me 2.40, which was ++It was created by opcodes $as_me 2.40.0, which was + generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ +@@ -3118,7 +3118,7 @@ fi + + # Define the identity of the package. + PACKAGE='opcodes' +- VERSION='2.40' ++ VERSION='2.40.0' + + + cat >>confdefs.h <<_ACEOF +@@ -13191,7 +13191,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri + # report actual input values of CONFIG_FILES etc. instead of their + # values after options handling. + ac_log=" +-This file was extended by opcodes $as_me 2.40, which was ++This file was extended by opcodes $as_me 2.40.0, which was + generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES +@@ -13257,7 +13257,7 @@ _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" + ac_cs_version="\\ +-opcodes config.status 2.40 ++opcodes config.status 2.40.0 + configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + diff --git a/toolchain/binutils/patches/2.40/040-configure-remove-dependencies-on-gmp-and-mpfr-when-g.patch b/toolchain/binutils/patches/2.40/040-configure-remove-dependencies-on-gmp-and-mpfr-when-g.patch new file mode 100644 index 0000000000..261acb549e --- /dev/null +++ b/toolchain/binutils/patches/2.40/040-configure-remove-dependencies-on-gmp-and-mpfr-when-g.patch @@ -0,0 +1,51 @@ +From 17294931e3e361bee6810b1a39493e214b38c5e5 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Cl=C3=A9ment=20Chigot?= +Date: Tue, 3 Jan 2023 14:24:43 +0100 +Subject: [PATCH 40/50] configure: remove dependencies on gmp and mpfr when gdb + is disabled + +Since 991180627851801f1999d1ebbc0e569a17e47c74, the configure checks +about GMP and MPFR for gdb builds have been moved to the toplevel +configure. +However, it doesn't take into account the --disable-gdb option. Meaning +that a build without gdb will require these libraries even if not +needed. + +ChangeLog: + + * configure.ac: Skip GMP and MPFR when --disable-gdb is + provided. + * configure: Regenerate. + +(cherry picked from commit 5fb0e308577143ceb313fde5538dc9ecb038f29f) +--- + configure | 4 +++- + configure.ac | 4 +++- + 2 files changed, 6 insertions(+), 2 deletions(-) + +--- a/configure ++++ b/configure +@@ -8032,7 +8032,9 @@ if test -d ${srcdir}/gcc ; then + require_mpc=yes + fi + if test -d ${srcdir}/gdb ; then +- require_gmp=yes ++ if test "x$enable_gdb" != xno; then ++ require_gmp=yes ++ fi + fi + + gmplibs="-lmpfr -lgmp" +--- a/configure.ac ++++ b/configure.ac +@@ -1585,7 +1585,9 @@ if test -d ${srcdir}/gcc ; then + require_mpc=yes + fi + if test -d ${srcdir}/gdb ; then +- require_gmp=yes ++ if test "x$enable_gdb" != xno; then ++ require_gmp=yes ++ fi + fi + + gmplibs="-lmpfr -lgmp" diff --git a/toolchain/binutils/patches/2.40/046-gas-correct-symbol-name-comparison-in-.startof.-.siz.patch b/toolchain/binutils/patches/2.40/046-gas-correct-symbol-name-comparison-in-.startof.-.siz.patch new file mode 100644 index 0000000000..4e31bb43ed --- /dev/null +++ b/toolchain/binutils/patches/2.40/046-gas-correct-symbol-name-comparison-in-.startof.-.siz.patch @@ -0,0 +1,46 @@ +From b2bc62b7b4e7638c3a249d2d2728ceb4d5f2b22c Mon Sep 17 00:00:00 2001 +From: Jan Beulich +Date: Tue, 14 Feb 2023 08:35:02 +0100 +Subject: [PATCH 46/50] gas: correct symbol name comparison in + .startof./.sizeof. handling + +In 162c6aef1f3a ("gas: fold symbol table entries generated for +.startof.() / .sizeof.()") I screwed up quite badly, inverting the case +sensitive and case insensitive comparison functions. +--- + gas/expr.c | 4 ++-- + gas/testsuite/gas/elf/startof.d | 2 ++ + gas/testsuite/gas/elf/startof.s | 3 +++ + 3 files changed, 7 insertions(+), 2 deletions(-) + +--- a/gas/expr.c ++++ b/gas/expr.c +@@ -149,8 +149,8 @@ symbol_lookup_or_make (const char *name, + + name = S_GET_NAME (symbolP); + if ((symbols_case_sensitive +- ? strcasecmp (buf, name) +- : strcmp (buf, name)) == 0) ++ ? strcmp (buf, name) ++ : strcasecmp (buf, name)) == 0) + { + free (buf); + return symbolP; +--- a/gas/testsuite/gas/elf/startof.d ++++ b/gas/testsuite/gas/elf/startof.d +@@ -7,4 +7,6 @@ Symbol table .* + #... + [1-8]: 0+ .* UND \.startof\.\.text + [2-9]: 0+ .* UND \.sizeof\.\.text ++ +[1-9][0-9]*: 0+ .* UND \.startof\.\.Text ++ +[1-9][0-9]*: 0+ .* UND \.sizeof\.\.TEXT + #pass +--- a/gas/testsuite/gas/elf/startof.s ++++ b/gas/testsuite/gas/elf/startof.s +@@ -4,3 +4,6 @@ + .dc.a 0 + .dc.a .sizeof.(.text) + .dc.a .startof.(.text) ++ .dc.a 0 ++ .dc.a .startof.(.Text) ++ .dc.a .sizeof.(.TEXT)