From: Simon Guo Date: Thu, 29 Jan 2015 05:34:28 +0000 (+0800) Subject: STAGING: Fix pcl818.c coding style issue: line over 80 characters X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8004a0c9b0e694c25e1ea7e058c64dff459f19f9;p=openwrt%2Fstaging%2Fblogic.git STAGING: Fix pcl818.c coding style issue: line over 80 characters Correct one coding style problem(detected by checkpatch.pl) in pcl818.c. - line over 80 characters Signed-off-by: Simon Guo Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c index 47a2f7bb22f4..7e4cdea5fe59 100644 --- a/drivers/staging/comedi/drivers/pcl818.c +++ b/drivers/staging/comedi/drivers/pcl818.c @@ -297,9 +297,11 @@ static const struct pcl818_board boardtypes[] = { struct pcl818_private { struct comedi_isadma *dma; - unsigned int ns_min; /* manimal allowed delay between samples (in us) for actual card */ + /* manimal allowed delay between samples (in us) for actual card */ + unsigned int ns_min; int i8253_osc_base; /* 1/frequency of on board oscilator in ns */ - unsigned int act_chanlist[16]; /* MUX setting for actual AI operations */ + /* MUX setting for actual AI operations */ + unsigned int act_chanlist[16]; unsigned int act_chanlist_len; /* how long is actual MUX list */ unsigned int act_chanlist_pos; /* actual position in MUX list */ unsigned int divisor1; @@ -618,7 +620,8 @@ static int check_channel_list(struct comedi_device *dev, break; nowmustbechan = (CR_CHAN(chansegment[i - 1]) + 1) % s->n_chan; - if (nowmustbechan != CR_CHAN(chanlist[i])) { /* channel list isn't continuous :-( */ + if (nowmustbechan != CR_CHAN(chanlist[i])) { + /* channel list isn't continuous :-( */ dev_dbg(dev->class_dev, "channel list must be continuous! chanlist[%i]=%d but must be %d or %d!\n", i, CR_CHAN(chanlist[i]), nowmustbechan, @@ -1124,8 +1127,10 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it) devpriv->ns_min = board->ns_min; if (!board->is_818) { - if ((it->options[6] == 1) || (it->options[6] == 100)) - devpriv->ns_min = 10000; /* extended PCL718 to 100kHz DAC */ + if ((it->options[6] == 1) || (it->options[6] == 100)) { + /* extended PCL718 to 100kHz DAC */ + devpriv->ns_min = 10000; + } } pcl818_reset(dev);