From: John Crispin Date: Thu, 1 Jun 2017 10:29:40 +0000 (+0200) Subject: ramips: add jumbo frame support for v4.9 X-Git-Tag: v18.06.0-rc1~2798 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7f9143168faef445effceead08d77ecc7c3e9dc6;p=openwrt%2Fstaging%2Fxback.git ramips: add jumbo frame support for v4.9 Signed-off-by: John Crispin --- diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/gsw_mt7620.h b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/gsw_mt7620.h index 77dd2ed0b8..ae0b6de024 100644 --- a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/gsw_mt7620.h +++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/gsw_mt7620.h @@ -47,6 +47,12 @@ #define GSW_REG_ISR 0x700c #define GSW_REG_GPC1 0x7014 +#define GSW_REG_MAC_P0_MCR 0x100 +#define GSW_REG_MAC_P1_MCR 0x200 + +// Global MAC control register +#define GSW_REG_GMACCR 0x30E0 + #define SYSC_REG_CHIP_REV_ID 0x0c #define SYSC_REG_CFG1 0x14 #define RST_CTRL_MCM BIT(2) diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/gsw_mt7621.c b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/gsw_mt7621.c index 8e2fbd282d..3adad48c88 100644 --- a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/gsw_mt7621.c +++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/gsw_mt7621.c @@ -100,16 +100,19 @@ static void mt7621_hw_init(struct mt7620_gsw *gsw, struct device_node *np) if ((rt_sysc_r32(SYSC_REG_CHIP_REV_ID) & 0xFFFF) == 0x0101) { /* (GE1, Force 1000M/FD, FC ON, MAX_RX_LENGTH 1536) */ - mtk_switch_w32(gsw, 0x2105e30b, 0x100); + mtk_switch_w32(gsw, 0x2305e30b, GSW_REG_MAC_P0_MCR); mt7530_mdio_w32(gsw, 0x3600, 0x5e30b); } else { /* (GE1, Force 1000M/FD, FC ON, MAX_RX_LENGTH 1536) */ - mtk_switch_w32(gsw, 0x2105e33b, 0x100); + mtk_switch_w32(gsw, 0x2305e33b, GSW_REG_MAC_P0_MCR); mt7530_mdio_w32(gsw, 0x3600, 0x5e33b); } /* (GE2, Link down) */ - mtk_switch_w32(gsw, 0x8000, 0x200); + mtk_switch_w32(gsw, 0x8000, GSW_REG_MAC_P1_MCR); + + /* Set switch max RX frame length to 2k */ + mt7530_mdio_w32(gsw, GSW_REG_GMACCR, 0x3F0B); /* Enable Port 6, P5 as GMAC5, P5 disable */ val = mt7530_mdio_r32(gsw, 0x7804); diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mtk_eth_soc.c b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mtk_eth_soc.c index 3e8768f63a..5f4afade06 100644 --- a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mtk_eth_soc.c +++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mtk_eth_soc.c @@ -1350,6 +1350,10 @@ static int fe_change_mtu(struct net_device *dev, int new_mtu) if (!(priv->flags & FE_FLAG_JUMBO_FRAME)) return eth_change_mtu(dev, new_mtu); + if (IS_ENABLED(CONFIG_SOC_MT7621)) + if (new_mtu > 2048) + return -EINVAL; + frag_size = fe_max_frag_size(new_mtu); if (new_mtu < 68 || frag_size > PAGE_SIZE) return -EINVAL; @@ -1373,15 +1377,17 @@ static int fe_change_mtu(struct net_device *dev, int new_mtu) return 0; fe_stop(dev); - fwd_cfg = fe_r32(FE_GDMA1_FWD_CFG); - if (new_mtu <= ETH_DATA_LEN) { - fwd_cfg &= ~FE_GDM1_JMB_EN; - } else { - fwd_cfg &= ~(FE_GDM1_JMB_LEN_MASK << FE_GDM1_JMB_LEN_SHIFT); - fwd_cfg |= (DIV_ROUND_UP(frag_size, 1024) << - FE_GDM1_JMB_LEN_SHIFT) | FE_GDM1_JMB_EN; + if (!IS_ENABLED(CONFIG_SOC_MT7621)) { + fwd_cfg = fe_r32(FE_GDMA1_FWD_CFG); + if (new_mtu <= ETH_DATA_LEN) { + fwd_cfg &= ~FE_GDM1_JMB_EN; + } else { + fwd_cfg &= ~(FE_GDM1_JMB_LEN_MASK << FE_GDM1_JMB_LEN_SHIFT); + fwd_cfg |= (DIV_ROUND_UP(frag_size, 1024) << + FE_GDM1_JMB_LEN_SHIFT) | FE_GDM1_JMB_EN; + } + fe_w32(fwd_cfg, FE_GDMA1_FWD_CFG); } - fe_w32(fwd_cfg, FE_GDMA1_FWD_CFG); return fe_open(dev); } diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/soc_mt7621.c b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/soc_mt7621.c index 3a8653e5e2..ce41b342e7 100644 --- a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/soc_mt7621.c +++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/soc_mt7621.c @@ -139,7 +139,7 @@ static void mt7621_init_data(struct fe_soc_data *data, priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_RX_2B_OFFSET | FE_FLAG_RX_SG_DMA | FE_FLAG_NAPI_WEIGHT | - FE_FLAG_HAS_SWITCH; + FE_FLAG_HAS_SWITCH | FE_FLAG_JUMBO_FRAME; netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_SG | NETIF_F_TSO |