From: John Crispin <john@openwrt.org>
Date: Sat, 17 Jan 2015 07:07:15 +0000 (+0000)
Subject: Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7f77870c19218b65d4262e329b1736ababb9e384;p=openwrt%2Fstaging%2Fyousong.git

Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK

Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK

Signed-off-by: Sylwester Petela <sscapi@gmail.com>

SVN-Revision: 43987
---

diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/01_leds b/target/linux/lantiq/base-files/etc/uci-defaults/01_leds
index 10ba2a13b7..3502eb2b27 100644
--- a/target/linux/lantiq/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/01_leds
@@ -37,6 +37,13 @@ VGV7519)
 	ucidef_set_led_netdev "internet_yellow" "internet_yellow" "internet_yellow" "nas0"
 	ucidef_set_led_netdev "broadband_yellow" "broadband_yellow" "broadband_yellow" "pppoe-wan"
 	;;
+P2812HNUF*)
+	ucidef_set_led_default "power" "power" "power" "0"
+	ucidef_set_led_default "power2" "power2" "power2" "1"
+	ucidef_set_led_wlan "wireless_green" "wireless_green" "wireless_green" "phy0radio"
+	ucidef_set_led_netdev "dsl" "dsl" "dsl" "nas0"
+	ucidef_set_led_netdev "internet_green" "internet_green" "internet_green" "pppoe-wan"
+	;;
 *)
 	;;
 esac
diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
index 1df83a6a9d..f9cac7c440 100644
--- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
@@ -145,7 +145,9 @@ P2601HNFX)
 	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
 	;;
 
-P2812HNUFX)
+P2812HNUF*)
+	lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_set_interface_lan 'eth0.1'
 	ucidef_add_switch "switch0" "1" "1"
 	ucidef_add_switch_vlan "switch0" "1" "0 1 2 4 5 6t"
diff --git a/target/linux/lantiq/base-files/lib/upgrade/platform.sh b/target/linux/lantiq/base-files/lib/upgrade/platform.sh
index 84f15c41ae..1688d3af2e 100755
--- a/target/linux/lantiq/base-files/lib/upgrade/platform.sh
+++ b/target/linux/lantiq/base-files/lib/upgrade/platform.sh
@@ -7,7 +7,7 @@ platform_check_image() {
 	local board=$(lantiq_board_name)
 
 	case "$board" in
-		BTHOMEHUBV2B|BTHOMEHUBV3A )
+		BTHOMEHUBV2B|BTHOMEHUBV3A|P2812HNUF* )
 			nand_do_platform_check $board $1
 			return $?;
 			;;
diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile
index 623f93bd0b..82f0e6f327 100644
--- a/target/linux/lantiq/image/Makefile
+++ b/target/linux/lantiq/image/Makefile
@@ -400,9 +400,11 @@ endif
 ifeq ($(CONFIG_TARGET_lantiq_xrx200),y)
 
 # VR9
-Image/BuildKernel/Profile/P2812HNUFX=$(call Image/BuildKernel/Template,P2812HNUFX)
-Image/InstallKernel/Template/P2812HNUFX=$(call Image/InstallKernel/Template,P2812HNUFX)
-Image/Build/Profile/P2812HNUFX=$(call Image/Build/$(1),$(1),P2812HNUFX)
+Image/BuildKernel/Profile/P2812HNUF1=$(call Image/BuildKernel/Template,P2812HNUF1)
+Image/Build/Profile/P2812HNUF1=$(call Image/BuildNAND/$(1),$(1),P2812HNUF1)
+
+Image/BuildKernel/Profile/P2812HNUF3=$(call Image/BuildKernel/Template,P2812HNUF3)
+Image/Build/Profile/P2812HNUF3=$(call Image/BuildNAND/$(1),$(1),P2812HNUF3)
 
 Image/BuildKernel/Profile/ARV7519RW22=$(call Image/BuildKernel/Template,ARV7519RW22,$(1))
 Image/Build/Profile/ARV7519RW22=$(call Image/Build/$(1),$(1),ARV7519RW22)
diff --git a/target/linux/lantiq/xrx200/config-default b/target/linux/lantiq/xrx200/config-default
index 09dfbdd2a0..73dad50240 100644
--- a/target/linux/lantiq/xrx200/config-default
+++ b/target/linux/lantiq/xrx200/config-default
@@ -30,9 +30,9 @@ CONFIG_MTD_NAND_XWAY=y
 # CONFIG_MTD_SM_COMMON is not set
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_BLOCK is not set
+CONFIG_MTD_UBI_BLOCK=y
 # CONFIG_MTD_UBI_FASTMAP is not set
-CONFIG_MTD_UBI_GLUEBI=y
+# CONFIG_MTD_UBI_GLUEBI is not set
 CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_NLS=y
 CONFIG_PCIE_LANTIQ=y
diff --git a/target/linux/lantiq/xrx200/profiles/zyxel.mk b/target/linux/lantiq/xrx200/profiles/zyxel.mk
index e758a50360..a43ee1433d 100644
--- a/target/linux/lantiq/xrx200/profiles/zyxel.mk
+++ b/target/linux/lantiq/xrx200/profiles/zyxel.mk
@@ -1,5 +1,5 @@
-define Profile/P2812HNUFX
-  NAME:=ZyXEL P-2812HNU-Fx
+define Profile/P2812HNUF1
+  NAME:=ZyXEL P-2812HNU-F1
   PACKAGES:=kmod-rt2800-pci wpad-mini \
 	kmod-ltq-deu-vr9 kmod-ltq-hcd-vr9 \
 	kmod-ltq-vdsl-vr9-mei kmod-ltq-vdsl-vr9 \
@@ -8,7 +8,23 @@ define Profile/P2812HNUFX
 	swconfig
 endef
 
-P2812HNUFX_UBIFS_OPTS:="-m 2048 -e 126KiB -c 4096"
-P2812HNUFX_UBI_OPTS:="-m 2048 -p 128KiB -s 512"
+P2812HNUF1_UBIFS_OPTS:="-m 2048 -e 126KiB -c 4096"
+P2812HNUF1_UBI_OPTS:="-m 2048 -p 128KiB -s 512"
+
+$(eval $(call Profile,P2812HNUF1))
+
+define Profile/P2812HNUF3
+  NAME:=ZyXEL P-2812HNU-F3
+  PACKAGES:=kmod-rt2800-pci wpad-mini \
+	kmod-ltq-deu-vr9 kmod-ltq-hcd-vr9 \
+	kmod-ltq-vdsl-vr9-mei kmod-ltq-vdsl-vr9 \
+	kmod-ltq-atm-vr9 ltq-vdsl-vr9-fw-installer \
+	ltq-vdsl-app ppp-mod-pppoa \
+	swconfig
+endef
+
+P2812HNUF3_UBIFS_OPTS:="-m 2048 -e 126KiB -c 4096"
+P2812HNUF3_UBI_OPTS:="-m 2048 -p 128KiB -s 512"
+
+$(eval $(call Profile,P2812HNUF3))
 
-$(eval $(call Profile,P2812HNUFX))