From: David Bauer Date: Sat, 15 Jan 2022 10:15:15 +0000 (+0100) Subject: lantiq: add additional caldata offsets X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7f7705923a8299323057e78ccae4473b5bb05807;p=openwrt%2Fstaging%2Fansuel.git lantiq: add additional caldata offsets It was reported the AVM FritzBox 7430 has different offsets for the caldata depending on the device. Whether this is due to custom bad-block handling or up to the installed bootloader-version is unknown. Try both known caldata offsets like it is already done for the ipq40xx NAND based models. Use the same approach for the FritzBox 7412. While it is currently unknown, whether it is affected, applying the same logic has no downsides. Signed-off-by: David Bauer --- diff --git a/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom index 07463a8061..e4683af960 100644 --- a/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom +++ b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom @@ -23,10 +23,9 @@ case "$FIRMWARE" in avm,fritz7360-v2) caldata_extract "urlader" 0x985 0x1000 ;; - avm,fritz7412) - /usr/bin/fritz_cal_extract -i 1 -s 0x1e000 -e 0x207 -l 4096 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader") - ;; + avm,fritz7412|\ avm,fritz7430) + /usr/bin/fritz_cal_extract -i 1 -s 0x1e000 -e 0x207 -l 4096 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader") || \ /usr/bin/fritz_cal_extract -i 1 -s 0x1e800 -e 0x207 -l 4096 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader") ;; bt,homehub-v5a)